@design-core/core 0.0.1 → 0.0.3

package/core/styles/dimStyle.js

@@ -1,719 +0,0 @@
-import {DXFFile} from '../lib/dxf/dxfFile.js';
-import {Logging} from '../lib/logging.js';
-
-export class DimStyle {
-  constructor(data) {
-    // Define Properties
-    this.type = this.constructor.name;
-    this.standardFlags = 0;
-    this.name = '';
-    this.DIMPOST = ''; // 3 - General dimensioning suffix
-    this.DIMAPOST = ''; // 4 - Alternate dimensioning suffix
-    this.DIMBLK = ''; // 5 - Arrow block name
-    this.DIMBLK1 = ''; // 6 - First arrow block name
-    this.DIMBLK2 = ''; // 7 - Second arrow block name
-    this.DIMSCALE = 1.0; // 40 - dimension scale
-    this.DIMASZ = 2.5; // 41 - arrow size
-    this.DIMEXO = 0.625; // 42 - offset from origin
-    this.DIMDLI = 3.75; // 43 - Baseline spacing
-    this.DIMEXE = 1.25; // 44- extend beyond dim lines
-    this.DIMRND = 0.0; // 45 - Rounding value for dimension distances
-    this.DIMDLE = 0.0; // 46 - Dimension line extension
-    this.DIMTP = 0.0; // 47 - Plus tolerance
-    this.DIMTM = 0.0; // 48 - Minus tolerance
-    this.DIMTXT = 2.5; // 140 - Dimensioning text height
-    this.DIMCEN = 2.5; // 141 - centre marks
-    this.DIMTSZ = 0.0; // 142 - Dimensioning tick size; 0 = no ticks
-    this.DIMALTF = 0.0394; // 143 - multiplier for alternate units
-    this.DIMLFAC = 1.0; // 144 - Measurement scale factor
-    this.DIMTVP = 0.0; // 145 - Text vertical position, The DIMTVP value is used when DIMTAD is off.
-    this.DIMTFAC = 1.0; // 146 - Dimension tolerance display scale factor
-    this.DIMGAP = 0.6250; // 147 - offset from dimline
-    this.DIMTOL = 0; // 71 - Dimension tolerances generated if nonzero
-    this.DIMLIM = 0; // 72 - Dimension limits generated if nonzero
-    this.DIMTIH = 0; // 73 - Text inside horizontal if nonzero, 0 = Aligns text with the dimension line, 1 = Draws text horizontally
-    this.DIMTOH = 0; // 74 - Text outside horizontal if nonzero, 0 = Aligns text with the dimension line, 1 = Draws text horizontally
-    this.DIMSE1 = false; // 75 - First extension line suppressed if nonzero
-    this.DIMSE2 = false; // 76 - Second extension line suppressed if nonzero
-    this.DIMTAD = 0; // 77 -Text above dimension line if nonzero
-    this.DIMZIN = 0; // 78 - Zero suppression for “feet & inch” dimensions
-    this.DIMALT = 0; // 170 - Alternate unit dimensioning performed if nonzero
-    this.DIMALTD = 2; // 171 - Alternate unit decimal places
-    this.DIMTOFL = 0; // 172 - If text outside extensions, force line extensions between extensions if nonzero
-    this.DIMSAH = 0; // 173 - Use separate arrow blocks if nonzero
-    this.DIMTIX = 0; // 174 - Force text inside extensions if nonzero
-    this.DIMSOXD = 0; // 175 - Suppress outside-extensions dimension lines if nonzero
-    this.DIMCLRD = 0; // 176 - Dimension line color, range is 0 = BYBLOCK, 256 = BYLAYER
-    this.DIMCLRE = 0; // 177 - Dimension extension line color, range is 0 = BYBLOCK, 256 = BYLAYER
-    this.DIMCLRT = 0; // 178 - Dimension text color, range is 0 = BYBLOCK, 256 = BYLAYER
-    this.DIMADEC = 0; // 179 - Number of precision places displayed in angular dimensions - Stored as dictionary
-    this.DIMUNIT= 2; // 270 - (obsolete, now use DIMLUNIT AND DIMFRAC)
-    this.DIMDEC = 2; // 271 - Number of decimal places for the tolerance values of a primary units dimension
-    this.DIMTDEC = 2; // 272 - Number of decimal places to display the tolerance values
-    this.DIMALTU = 2; // 273 - Units format for alternate units of all dimension style family members except angular
-    this.DIMALTTD = 3; // 274 - Number of decimal places for tolerance values of an alternate units dimension
-    this.DIMAUNIT = 0; // 275 - Angle format for angular dimensions
-    this.DIMFRAC = 0; // 276 - Fraction format when DIMLUNIT is set to 4 (Architectural) or 5 (Fractional).
-    this.DIMLUNIT = 2; // 277 - Sets units for all dimension types except Angular
-    this.DIMDSEP = ','; // 278 - Single-character decimal separator used when creating dimensions whose unit format is decimal - Stored as dictionary
-    this.DIMTMOVE = 0; // 279 - Dimension text movement rules
-    this.DIMJUST = 0; // 280 - Horizontal dimension text position
-    this.DIMSD1 = false; // 281 - Suppression of first extension line
-    this.DIMSD2 = false; // 282 - Suppression of second extension line
-    this.DIMTOLJ = 0; // 283 - Vertical justification for tolerance values
-    this.DIMTZIN = 8; // 284 - Controls suppression of zeros for tolerance values
-    this.DIMALTZ = 0; // 285 - Controls suppression of zeros for alternate unit dimension values
-    this.DIMALTTZ = 0; // 286 - Controls suppression of zeros for alternate tolerance values
-    this.DIMFIT = 3; // 287 - (obsolete, now use DIMATFIT and DIMTMOVE)
-    this.DIMUPT = 0; // 288 - Cursor functionality for user-positioned text, 0 = Cursor controls only the dimension line location, 1 = Cursor controls both the text position and the dimension line location
-    this.DIMATFIT = 3; // 289 - Controls dimension text and arrow placement when space is not sufficient to place both within the extension lines
-    this.DIMTXSTY = 'Standard'; // 340 - (handle of referenced STYLE)
-    this.DIMLDRBLK = ''; // 341 - (handle of referenced BLOCK)
-    this.DIMBLK = ''; // 342 - (handle of referenced BLOCK)
-    this.DIMBLK1 = ''; // 343 - (handle of referenced BLOCK)
-    this.DIMBLK2 = ''; // 344 - (handle of referenced BLOCK)
-    this.DIMLWD = -2; // 371 - (lineweight enum value)
-    this.DIMLWE = -2; // 372 - (lineweight enum value)
-
-    /*
-    The following properties are not implemented
-    DIMALTRND - R2000
-    DIMANNO - R2008
-    DIMARCSYM - R2007
-    DIMASSOC - 2002
-    DIMASO - OBSOLETE
-    DIMAZIN - R2000
-    DIMCONSTRAINTICON - R2010
-    DIMFXL - R2007
-    DIMFXLON - R2007
-    DIMJOGANG - R2007
-    DIMLTEX1 - R2007
-    DIMLTEX2 - R2007
-    DIMLTYPE - R2007
-    DIMSHO - OBSOLETE
-    DIMTFILL - R2007
-    DIMTFILLCLR - R2007
-    DIMTXTDIRECTION - R2010
-    */
-
-    if (data) {
-      if (data.name || data[2]) {
-        // DXF Groupcode 2 - ltype name
-        this.name = data.name || data[2];
-      }
-
-      if (data[3]) {
-        // DXF Groupcode 3 - General dimensioning suffix
-        this.DIMPOST = data[3];
-      }
-
-      if (data[4]) {
-        // DXF Groupcode 4 - Alternate dimensioning suffix
-        this.DIMAPOST = data[4];
-      }
-
-      if (data[5]) {
-        // DXF Groupcode 5 - Arrow block name
-        this.DIMBLK = data[5];
-
-        const err = 'DXF Groupcode 5 - obsolete';
-        Logging.instance.warn(`${this.type} - ${err}`);
-      }
-
-      if (data[6]) {
-        // DXF Groupcode 6 - First arrow block name
-        this.DIMBLK1 = data[6];
-
-        const err = 'DXF Groupcode 6 - obsolete';
-        Logging.instance.warn(`${this.type} - ${err}`);
-      }
-
-      if (data[7]) {
-        // DXF Groupcode 7 - Second arrow block name
-        this.DIMBLK2 = data[7];
-
-        const err = 'DXF Groupcode 7 - obsolete';
-        Logging.instance.warn(`${this.type} - ${err}`);
-      }
-
-      if (data[40]) {
-        // DXF Groupcode 40 - dimension scale
-        /*
-          Sets the overall scale factor applied to dimensioning variables that specify sizes, distances, or offsets.
-          Also affects the leader objects with the LEADER command.
-          Use MLEADERSCALE to scale multileader objects created with the MLEADER command.
-          0.0 = A reasonable default value is computed based on the scaling between the current model space viewport and paper space.
-          If you are in paper space or model space and not using the paper space feature, the scale factor is 1.0.
-          >0 = A scale factor is computed that leads text sizes, arrowhead sizes, and other scaled distances to plot at their face values.
-
-          DIMSCALE does not affect measured lengths, coordinates, or angles.
-          Use DIMSCALE to control the overall scale of dimensions.
-          However, if the current dimension style is annotative, DIMSCALE is automatically set to zero and the dimension scale is controlled by the CANNOSCALE system variable.
-          DIMSCALE cannot be set to a non-zero value when using annotative dimensions.
-        */
-        this.DIMSCALE = data[40];
-      }
-
-      if (data[41]) {
-        // DXF Groupcode 41 - arrow size
-        this.DIMASZ = data[41];
-      }
-
-      if (data[42]) {
-        // DXF Groupcode 42 - offset from origin
-        this.DIMEXO = data[42];
-      }
-
-      if (data[43]) {
-        // DXF Groupcode 43 - Baseline spacing
-        this.DIMDLI = data[43];
-      }
-
-      if (data[44]) {
-        // DXF Groupcode 44- extend beyond dim lines
-        this.DIMEXE = data[44];
-      }
-
-      if (data[45]) {
-        // DXF Groupcode 45 - Rounding value for dimension distances
-        this.DIMRND = data[45];
-      }
-
-      if (data[45]) {
-        // DXF Groupcode 46 - Dimension line extension
-        this.DIMDLE = data[46];
-      }
-
-      if (data[47]) {
-        // DXF Groupcode 47 - Plus tolerance
-        this.DIMTP = data[47];
-      }
-
-      if (data[48]) {
-        // DXF Groupcode 48 - Minus tolerance
-        this.DIMTM = data[48];
-      }
-
-      if (data[140]) {
-        // DXF Groupcode 140 - Dimensioning text height
-        this.DIMTXT = data[140];
-      }
-
-      if (data[141]) {
-        // DXF Groupcode 141 - centre marks
-        this.DIMCEN = data[141];
-      }
-
-      if (data[142]) {
-        // DXF Groupcode 142 - Dimensioning tick size; 0 = no ticks
-        this.DIMTSZ = data[142];
-      }
-
-      if (data[143]) {
-        // DXF Groupcode 143 - multiplier for alternate units
-        this.DIMALTF = data[143];
-      }
-
-      if (data[144]) {
-        // DXF Groupcode 144 - Measurement scale factor
-        this.DIMLFAC = data[144];
-      }
-
-      if (data[145]) {
-        // DXF Groupcode 145 - Text vertical position
-        this.DIMTVP = data[145];
-      }
-
-      if (data[146]) {
-        // DXF Groupcode 146 - Dimension tolerance display scale factor
-        this.DIMTFAC = data[146];
-      }
-
-      if (data[147]) {
-        // DXF Groupcode 147 - offset from dimline
-        // The value of DIMGAP is also used as the minimum length of each segment of the dimension line.
-        // To locate the components of a linear dimension within the extension lines, enough space must be available for both arrowheads (2 x DIMASZ),
-        // both dimension line segments (2 x DIMGAP), a gap on either side of the dimension text (another 2 x DIMGAP), and the length of the dimension text,
-        // which depends on its size and number of decimal places displayed
-        this.DIMGAP = data[147];
-      }
-
-      if (data.standardFlags || data[70]) {
-        // DXF Groupcode 70 - standard flags
-        /*
-        1 = If set, this entry describes a shape
-        4 = Vertical text
-        16 = If set, table entry is externally dependent on an xref
-        32 = If this bit and bit 16 are both set, the externally dependent xref has been successfully resolved
-        64 = If set, the table entry was referenced by at least one entity in the drawing the last time the drawing was edited.
-        (This flag is for the benefit of AutoCAD commands. It can be ignored.
-        */
-        this.standardFlags = data.standardFlags || data[70];
-      }
-
-      if (data[71]) {
-        // DXF Groupcode 71 - Dimension tolerances generated if nonzero
-        // Setting DIMTOL to on (1) turns DIMLIM off (0)
-        this.DIMTOL = data[71];
-      }
-
-      if (data[72]) {
-        // DXF Groupcode 72 - Dimension limits generated if nonzero
-        // 0 = Dimension limits are not generated as default text
-        // 1 = Dimension limits are generated as default text
-        // Setting DIMLIM to on (1) turns DIMTOL off (0)
-        this.DIMLIM = data[72];
-      }
-
-      if (data[73]) {
-        // DXF Groupcode 73 - Text inside horizontal if nonzero
-        // 0 = Aligns text with the dimension line
-        // 1 = Draws text horizontally
-        this.DIMTIH = data[73];
-      }
-
-      if (data[74]) {
-        // DXF Groupcode 74 - Text outside horizontal if nonzero
-        // 0 = Aligns text with the dimension line
-        // 1 = Draws text horizontally
-        this.DIMTOH = data[74];
-      }
-
-      if (data[75]) {
-        // DXF Groupcode 75 - First extension line suppressed if nonzero
-        this.DIMSE1 = Boolean(data[75]);
-      }
-
-      if (data[76]) {
-        // DXF Groupcode 76 - Second extension line suppressed if nonzero
-        this.DIMSE2 = Boolean(data[76]);
-      }
-
-      if (data[77]) {
-        // DXF Groupcode 77 -Text above dimension line if nonzero
-        // 0 = Centers the dimension text between the extension lines.
-        // 1 = Places the dimension text above the dimension line except when the dimension line is not horizontal and text inside the extension lines is forced horizontal ( DIMTIH = 1). The distance from the dimension line to the baseline of the lowest line of text is the current DIMGAP value.
-        // 2 = Places the dimension text on the side of the dimension line farthest away from the defining points.
-        // 3 = Places the dimension text to conform to Japanese Industrial Standards (JIS).
-        // 4 = Places the dimension text below the dimension line.
-
-        this.DIMTAD = data[77];
-      }
-
-      if (data[78]) {
-        // DXF Groupcode 78 - Zero suppression for “feet & inch” dimensions
-        /*
-        Values 0-3 affect feet-and-inch dimensions only:
-
-        0 = Suppresses zero feet and precisely zero inches
-        1 = Includes zero feet and precisely zero inches
-        2 = Includes zero feet and suppresses zero inches
-        3 = Includes zero inches and suppresses zero feet
-        4 = Suppresses leading zeros in decimal dimensions (for example, 0.5000 becomes .5000)
-        8 = Suppresses trailing zeros in decimal dimensions (for example, 12.5000 becomes 12.5)
-        12 = Suppresses both leading and trailing zeros (for example, 0.5000 becomes .5)
-        */
-        this.DIMZIN = data[78];
-      }
-
-      if (data[170]) {
-        // DXF Groupcode 170 - Alternate unit dimensioning performed if nonzero
-        this.DIMALT = data[170];
-      }
-
-      if (data[171]) {
-        // DXF Groupcode 171 - Alternate unit decimal places
-        this.DIMALTD = data[171];
-      }
-
-      if (data[172]) {
-        // DXF Groupcode 172 - If text outside extensions, force line extensions between extensions if nonzero
-        this.DIMTOFL = data[172];
-      }
-
-      if (data[173]) {
-        // DXF Groupcode 173 - Use separate arrow blocks if nonzero
-        /*
-        Off = Use arrowhead blocks set by DIMBLK
-        On = Use arrowhead blocks set by DIMBLK1 and DIMBLK2
-        */
-        this.DIMSAH = data[173];
-      }
-
-      if (data[174]) {
-        // DXF Groupcode 174 - Force text inside extensions if nonzero
-        /*
-        Off = Varies with the type of dimension.
-        For linear and angular dimensions, text is placed inside the extension lines if there is sufficient room.
-        For radius and diameter dimensions that don’t fit inside the circle or arc, DIMTIX has no effect and always forces the text outside the circle or arc.
-
-        On = Draws dimension text between the extension lines even if it would ordinarily be placed outside those lines
-        */
-        this.DIMTIX = data[174];
-      }
-
-      if (data[175]) {
-        // DXF Groupcode 175 - Suppress outside-extensions dimension lines if nonzero
-        /*
-        If not enough space is available inside the extension lines and DIMTIX is on, setting DIMSOXD to On suppresses the arrowheads.
-        If DIMTIX is off, DIMSOXD has no effect
-
-        Off = Arrowheads are not suppressed
-        On = Arrowheads are suppressed
-        */
-        this.DIMSOXD = data[175];
-      }
-
-      if (data[176]) {
-        // DXF Groupcode 176 - Dimension line color, range is 0 = BYBLOCK, 256 = BYLAYER
-        this.DIMCLRD = data[176];
-      }
-
-      if (data[177]) {
-        // DXF Groupcode 177 - Dimension extension line color, range is 0 = BYBLOCK, 256 = BYLAYER
-        this.DIMCLRE = data[177];
-      }
-
-      if (data[178]) {
-        // DXF Groupcode 178 - Dimension text color, range is 0 = BYBLOCK, 256 = BYLAYER
-        this.DIMCLRT = data[178];
-      }
-
-      if (data[179]) {
-        // DXF Groupcode 179 - Number of precision places displayed in angular dimensions
-        this.DIMADEC = data[179];
-      }
-
-      if (data[270]) {
-        // DXF Groupcode 270 - (obsolete, now use DIMLUNIT AND DIMFRAC)
-        this.DIMUNIT = data[270];
-
-        const err = `obsolete group code - 270`;
-        Logging.instance.warn(`${this.type} - ${err}`);
-      }
-
-      if (data[271]) {
-        // DXF Groupcode 271 - Number of decimal places for the tolerance values of a primary units dimension
-        this.DIMDEC = data[271];
-      }
-
-      if (data[272]) {
-        // DXF Groupcode 272 - Number of decimal places to display the tolerance values
-        // This system variable has no effect unless DIMTOL is set to On. The default for DIMTOL is Off
-        this.DIMTDEC = data[272];
-      }
-
-      if (data[273]) {
-        // DXF Groupcode 273 - Units format for alternate units of all dimension style family members except angular:
-        // 1 = Scientific; 2 = Decimal; 3 = Engineering;
-        // 4 = Architectural (stacked); 5 = Fractional (stacked);
-        // 6 = Architectural; 7 = Fractional
-        this.DIMALTU = data[273];
-      }
-
-      if (data[274]) {
-        // DXF Groupcode 274 - Number of decimal places for tolerance values of an alternate units dimension
-        this.DIMALTTD = data[274];
-      }
-
-      if (data[275]) {
-        // DXF Groupcode 275 - Angle format for angular dimensions:
-        // 0 = Decimal degrees; 1 = Degrees/minutes/seconds;
-        // 2 = Gradians; 3 = Radians; 4 = Surveyor’s units
-        this.DIMAUNIT = data[275];
-      }
-
-      if (data[276]) {
-        // DXF Groupcode 276 - Fraction format when DIMLUNIT is set to 4 (Architectural) or 5 (Fractional).
-        this.DIMFRAC = data[276];
-      }
-
-      if (data[277]) {
-        // DXF Groupcode 277 - Sets units for all dimension types except Angular:
-        // 1 = Scientific; 2 = Decimal; 3 = Engineering;
-        // 4 = Architectural; 5 = Fractional; 6 = Windows desktop
-        this.DIMLUNIT = data[277];
-      }
-
-      if (data[278]) {
-        // DXF Groupcode 278 - Single-character decimal separator used when creating dimensions whose unit format is decimal
-        // Period - ?
-        // Comma - 44
-        // Space - 32
-        this.DIMDSEP = data[278];
-      }
-
-      if (data[279]) {
-        // DXF Groupcode 279 - Dimension text movement rules:
-        // 0 = Moves the dimension line with dimension text
-        // 1 = Adds a leader when dimension text is moved
-        // 2 = Allows text to be moved freely without a leader
-        this.DIMTMOVE = data[279];
-      }
-
-      if (data[280]) {
-        // DXF Groupcode 280 - Horizontal dimension text position:
-        // 0 = Above dimension line and center-justified between extension lines
-        // 1 = Above dimension line and next to first extension line
-        // 2 = Above dimension line and next to second extension line
-        // 3 = Above and center-justified to first extension line
-        // 4 = Above and center-justified to second extension line
-        this.DIMJUST = data[280];
-      }
-
-      if (data[281]) {
-        // DXF Groupcode 281 - Suppression of first extension line:
-        // 0 = Not suppressed; 1 = Suppressed
-        this.DIMSD1 = Boolean(data[281]);
-      }
-
-      if (data[282]) {
-        // DXF Groupcode 282 - Suppression of second extension line:
-        // 0 = Not suppressed; 1 = Suppressed
-        this.DIMSD2 = Boolean(data[282]);
-      }
-
-      if (data[283]) {
-        // DXF Groupcode 283 - Vertical justification for tolerance values:
-        // 0 = Top; 1 = Middle; 2 = Bottom
-        this.DIMTOLJ = data[283];
-      }
-
-      if (data[284]) {
-        // DXF Groupcode 284 - Controls suppression of zeros for tolerance values:
-        // 0 = Suppresses zero feet and precisely zero inches
-        // 1 = Includes zero feet and precisely zero inches
-        // 2 = Includes zero feet and suppresses zero inches
-        // 3 = Includes zero inches and suppresses zero feet
-        this.DIMTZIN = data[284];
-      }
-
-      if (data[285]) {
-        // DXF Groupcode 285 - Controls suppression of zeros for alternate unit dimension values:
-        // 0 = Suppresses zero feet and precisely zero inches
-        // 1 = Includes zero feet and precisely zero inches
-        // 2 = Includes zero feet and suppresses zero inches
-        // 3 = Includes zero inches and suppresses zero feet
-        this.DIMALTZ = data[285];
-      }
-
-      if (data[286]) {
-        // DXF Groupcode 286 - Controls suppression of zeros for alternate tolerance values:
-        // 0 = Suppresses zero feet and precisely zero inches
-        // 1 = Includes zero feet and precisely zero inches
-        // 2 = Includes zero feet and suppresses zero inches
-        // 3 = Includes zero inches and suppresses zero feet
-        this.DIMALTTZ = data[286];
-      }
-
-      if (data[287]) {
-        // DXF Groupcode 287 - (obsolete, now use DIMATFIT and DIMTMOVE)
-        this.DIMFIT = data[287];
-
-        const err = `obsolete group code - 287`;
-        Logging.instance.warn(`${this.type} - ${err}`);
-      }
-
-      if (data[288]) {
-        // DXF Groupcode 288 - Cursor functionality for user-positioned text:
-        // 0 = Controls only the dimension line location
-        // 1 = Controls the text position as well as the dimension line location
-        this.DIMUPT = data[288];
-      }
-
-      if (data[289]) {
-        // DXF Groupcode 289 - Controls dimension text and arrow placement when space is not sufficient to place both within the extension lines:
-        // 0 = Places both text and arrows outside extension lines
-        // 1 = Moves arrows first, then text
-        // 2 = Moves text first, then arrows
-        // 3 = Moves either text or arrows, whichever fits best AutoCAD adds a leader to moved dimension text when DIMTMOVE is set to 1
-        this.DIMATFIT = data[289];
-      }
-
-      if (data[340]) {
-        // DXF Groupcode 340 - (handle of referenced STYLE)
-        this.DIMTXSTY = data[340];
-      }
-
-      if (data[341]) {
-        // DXF Groupcode 341 - (handle of referenced BLOCK)
-        this.DIMLDRBLK = data[341];
-      }
-
-      if (data[342]) {
-        // DXF Groupcode 342 - (handle of referenced BLOCK)
-        /*
-        “” = closed filled
-        “_DOT” = dot
-        “_DOTSMALL” = dot small
-        “_DOTBLANK”= dot blank
-        “_ORIGIN” = origin indicator
-        “_ORIGIN2” = origin indicator 2
-        “_OPEN” = open
-        “_OPEN90” = right angle
-        “_OPEN30” = open 30
-        “_CLOSED” = closed
-        “_SMALL” = dot small blank
-        “_NONE” = none
-        “_OBLIQUE” = oblique
-        “_BOXFILLED” = box filled
-        “_BOXBLANK” = box
-        “_CLOSEDBLANK” = closed blank
-        “_DATUMFILLED” = datum triangle filled
-        “_DATUMBLANK” = datum triangle
-        “_INTEGRAL” = integral
-        “_ARCHTICK” = architectural tick
-        */
-        this.DIMBLK = data[342];
-      }
-
-      if (data[343]) {
-        // DXF Groupcode 343 - (handle of referenced BLOCK)
-        this.DIMBLK1 = data[343];
-      }
-
-      if (data[344]) {
-        // DXF Groupcode 344 - (handle of referenced BLOCK)
-        this.DIMBLK2 = data[344];
-      }
-
-      if (data[371]) {
-        // DXF Groupcode 371 - (lineweight enum value)
-        /*
-        -3 Default (the LWDEFAULT value)
-        -2 BYBLOCK
-        -1 BYLAYER
-        */
-        this.DIMLWD = data[371];
-      }
-
-      if (data[372]) {
-        // DXF Groupcode 372 - (lineweight enum value)
-        /*
-        -3 Default (the LWDEFAULT value)
-        -2 BYBLOCK
-        -1 BYLAYER
-        */
-        this.DIMLWE = data[372];
-      }
-    }
-
-    const err = 'DXF Groupcodes incomplete';
-    Logging.instance.warn(`${this.type} - ${err}`);
-  }
-
-  /**
-   * Get valueName property value from dimstyle
-   * @param {string} valueName
-   * @returns value or undefined
-   */
-  getValue(valueName) {
-    if (this.hasOwnProperty(valueName)) {
-      return this[valueName];
-    }
-
-    const err = `Getting Value - ${valueName}`;
-    Logging.instance.warn(`${this.type} - ${err}`);
-    return;
-  }
-
-  /**
-   * Get the vertical value
-   * @returns {bool}
-   */
-  get vertical() {
-    // Vertical value is bitmasked in standardflags as value 4
-    return Boolean(this.standardFlags & 4);
-  }
-
-  /**
-   * Set the vertical value
-   * @param {boolean} bool
-   */
-  set vertical(bool) {
-    if (bool) {
-      // Add vertical flag
-      this.standardFlags = (this.standardFlags | 4);
-    } else {
-      // remove vertical flag
-      this.standardFlags = (this.standardFlags ^ (this.standardFlags & 4));
-    }
-  }
-
-
-  dxf(file) {
-    file.writeGroupCode('0', 'DIMSTYLE');
-    file.writeGroupCode('105', file.nextHandle(), DXFFile.Version.R2000); // Handle
-    file.writeGroupCode('100', 'AcDbSymbolTableRecord', DXFFile.Version.R2000);
-    file.writeGroupCode('100', 'AcDbDimStyleTableRecord', DXFFile.Version.R2000);
-    file.writeGroupCode('2', this.name); // Stylename
-    file.writeGroupCode('70', this.standardFlags);
-    file.writeGroupCode('3', this.DIMPOST);
-    file.writeGroupCode('4', this.DIMAPOST);
-    file.writeGroupCode('5', this.DIMBLK);
-    file.writeGroupCode('6', this.DIMBLK1);
-    file.writeGroupCode('7', this.DIMBLK2);
-    file.writeGroupCode('40', this.DIMSCALE);
-    file.writeGroupCode('41', this.DIMASZ);
-    file.writeGroupCode('42', this.DIMEXO);
-    file.writeGroupCode('43', this.DIMDLI);
-    file.writeGroupCode('44', this.DIMEXE);
-    file.writeGroupCode('45', this.DIMRND);
-    file.writeGroupCode('46', this.DIMDLE);
-    file.writeGroupCode('47', this.DIMTP);
-    file.writeGroupCode('48', this.DIMTM);
-    file.writeGroupCode('140', this.DIMTXT);
-    file.writeGroupCode('141', this.DIMCEN);
-    file.writeGroupCode('142', this.DIMTSZ);
-    file.writeGroupCode('143', this.DIMALTF);
-    file.writeGroupCode('144', this.DIMLFAC);
-    file.writeGroupCode('145', this.DIMTVP);
-    file.writeGroupCode('146', this.DIMTFAC);
-    file.writeGroupCode('147', this.DIMGAP);
-    file.writeGroupCode('71', this.DIMTOL);
-    file.writeGroupCode('72', this.DIMLIM);
-    file.writeGroupCode('73', this.DIMTIH);
-    file.writeGroupCode('74', this.DIMTOH);
-    file.writeGroupCode('75', this.DIMSE1 ? 1 : 0); // convert bool to int
-    file.writeGroupCode('76', this.DIMSE2 ? 1 : 0); // convert bool to int
-    file.writeGroupCode('77', this.DIMTAD);
-    file.writeGroupCode('78', this.DIMZIN);
-    file.writeGroupCode('170', this.DIMALT);
-    file.writeGroupCode('171', this.DIMALTD);
-    file.writeGroupCode('172', this.DIMTOFL);
-    file.writeGroupCode('173', this.DIMSAH);
-    file.writeGroupCode('174', this.DIMTIX);
-    file.writeGroupCode('175', this.DIMSOXD);
-    file.writeGroupCode('176', this.DIMCLRD);
-    file.writeGroupCode('177', this.DIMCLRE);
-    file.writeGroupCode('178', this.DIMCLRT);
-    file.writeGroupCode('179', this.DIMADEC, DXFFile.Version.R14);
-    // file.writeGroupCode('270', this.DIMUNIT); // obsolete, now use DIMLUNIT AND DIMFRAC
-    file.writeGroupCode('271', this.DIMDEC);
-    file.writeGroupCode('272', this.DIMTDEC, DXFFile.Version.R13);
-    file.writeGroupCode('273', this.DIMALTU, DXFFile.Version.R13);
-    file.writeGroupCode('274', this.DIMALTTD, DXFFile.Version.R13);
-    file.writeGroupCode('275', this.DIMAUNIT, DXFFile.Version.R13);
-    file.writeGroupCode('276', this.DIMFRAC, DXFFile.Version.R2000);
-    file.writeGroupCode('277', this.DIMLUNIT, DXFFile.Version.R2000);
-    // file.writeGroupCode('278', this.DIMDSEP, DXFFile.Version.R14)); - TODO: AutoCAD uses a numberical description
-    file.writeGroupCode('279', this.DIMTMOVE, DXFFile.Version.R2000);
-    file.writeGroupCode('280', this.DIMJUST, DXFFile.Version.R13);
-    file.writeGroupCode('281', this.DIMSD1 ? 1 : 0, DXFFile.Version.R13); // convert bool to int
-    file.writeGroupCode('282', this.DIMSD2 ? 1 : 0, DXFFile.Version.R13); // convert bool to int
-    file.writeGroupCode('283', this.DIMTOLJ, DXFFile.Version.R13);
-    file.writeGroupCode('284', this.DIMTZIN, DXFFile.Version.R13);
-    file.writeGroupCode('285', this.DIMALTZ, DXFFile.Version.R13);
-    file.writeGroupCode('286', this.DIMALTTZ, DXFFile.Version.R13);
-    file.writeGroupCode('287', this.DIMFIT);
-    file.writeGroupCode('288', this.DIMUPT, DXFFile.Version.R13);
-    file.writeGroupCode('289', this.DIMATFIT, DXFFile.Version.R2000);
-    file.writeGroupCode('340', this.DIMTXSTY, DXFFile.Version.R13);
-    file.writeGroupCode('341', this.DIMLDRBLK, DXFFile.Version.R2000);
-    file.writeGroupCode('342', this.DIMBLK);
-    file.writeGroupCode('343', this.DIMBLK1);
-    file.writeGroupCode('344', this.DIMBLK2);
-    file.writeGroupCode('371', this.DIMLWD, DXFFile.Version.R2000);
-    file.writeGroupCode('372', this.DIMLWE, DXFFile.Version.R2000);
-  }
-}