@deepseek-ai/dsh-mcp-client 0.1.2-alpha.5 → 0.1.3-alpha.2

package/README.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write packages/mcp/mcp-client/README.md
-README.md: f4979b6a2c9a7cfdbbb11cf7526688ce2549f184
-README.zh.md: e18e05a2a74944ace14f4cca7807dd3456e32dd1
+README.md: 19e0d46f54ae1f67dc3361d9694ce5b8fb348e4e
+README.zh.md: a89245cd272cdb5c0f7c405b196a7e8b51ec9238

package/README.md

@@ -120,7 +120,7 @@ This section explains the design decisions behind the bridge and points at the c
 
 ### Lifecycle and sync
 
-`apply` resolves the reconnect policy, reserves the `serverName` inside the current registration scope, starts the supervisor, and awaits the initial connection plus discovery. Independent Agent scopes may reuse the same namespace because their tools and transports are isolated; a duplicate inside one scope fails at load. The supervisor serializes every sync — initial, notification, and reconnect — through one queue so two syncs can never interleave their dispose-previous/register-next swap. Disposal cancels pending reconnects, closes the live client, waits for the in-flight attempt and queued syncs to quiesce, and unregisters the current generation. The [auto-reconnect Agent Note](../../../.agents/notes/implemented/feature/2026-08-06-mcp-client-auto-reconnect.md) owns the reconnect decision.
+`apply` resolves the reconnect policy, reserves the `serverName` inside the current registration scope, starts the supervisor, and awaits the initial connection plus discovery. Independent Agent scopes may reuse the same namespace because their tools and transports are isolated; a duplicate inside one scope fails at load. The supervisor serializes every sync — initial, notification, and reconnect — through one queue so two syncs can never interleave their dispose-previous/register-next swap. Disposal cancels pending reconnects, closes the live client, waits for the in-flight attempt and queued syncs to quiesce, and unregisters the current generation.
 
 The supervisor listens for `notifications/tools/list_changed` and queues a re-sync; a fetch-phase failure keeps the previous generation registered, while a registration conflict rolls back the attempted generation. Each outage shares one attempt budget: after `maxAttempts` consecutive failures the tools are unregistered and reconnection stops, and a connection that stays up past `maxDelayMs` resets the budget.
 
@@ -143,7 +143,6 @@ Read these pages when the package-level contract is not enough. They move from t
 
 - [Tools subsystem reference](../../../docs/subsystems/tools.md) — the `ToolRuntime` and `ctx.tools.register()` contract that receives the bridged tools.
 - [MCP client plugin Agent Note](../../../.agents/notes/implemented/feature/2026-07-07-mcp-client-plugin.md) — the naming invariants, discovery and execution design, alternatives, and consequences.
-- [MCP client auto-reconnect Agent Note](../../../.agents/notes/implemented/feature/2026-08-06-mcp-client-auto-reconnect.md) — the reconnect policy, attempt budget, and opt-out rationale.
 - [Canonical tool output contract Agent Note](../../../.agents/notes/implemented/architecture/2026-07-20-canonical-tool-output-contract.md) — how MCP results map into the canonical tool-output contract.
 - [Third-party memory MCP guide](../../../docs/user/guide/mcp-memory.md) — three memory-server overlays using this package.
 - [Generated configuration catalog](../../../docs/config-catalog.md#deepseek-aidsh-mcp-client) — every accepted config field and its source declaration.

package/README.zh.md

@@ -120,7 +120,7 @@ kind: "package-reference"
 
 ### 生命周期与同步
 
-`apply` 解析重连策略、在当前注册作用域内预留 `serverName`、启动监督器，并等待初始连接加发现完成。独立 Agent 作用域可以复用相同 namespace，因为其工具与传输彼此隔离；同一作用域内重复会在加载时失败。监督器把所有同步——初始、通知与重连——串行到同一条队列，因此两次同步绝不会交错执行各自的先 dispose 后注册交换。dispose 会取消待执行的重连、关闭活动客户端、等待进行中的尝试与排队同步完全停稳，然后注销当前世代。[自动重连 Agent Note](../../../.agents/notes/implemented/feature/2026-08-06-mcp-client-auto-reconnect.zh.md) 拥有重连决策。
+`apply` 解析重连策略、在当前注册作用域内预留 `serverName`、启动监督器，并等待初始连接加发现完成。独立 Agent 作用域可以复用相同 namespace，因为其工具与传输彼此隔离；同一作用域内重复会在加载时失败。监督器把所有同步——初始、通知与重连——串行到同一条队列，因此两次同步绝不会交错执行各自的先 dispose 后注册交换。dispose 会取消待执行的重连、关闭活动客户端、等待进行中的尝试与排队同步完全停稳，然后注销当前世代。
 
 监督器监听 `notifications/tools/list_changed` 并排队一次重新同步；获取阶段失败时保留上一世代注册，注册冲突则回滚本次尝试的世代。每次中断共享一个尝试预算：连续失败达到 `maxAttempts` 次后工具被注销、重连停止；连接存活超过 `maxDelayMs` 会重置预算。
 
@@ -143,7 +143,6 @@ kind: "package-reference"
 
 - [工具子系统参考](../../../docs/subsystems/tools.zh.md)——接收已桥接工具的 `ToolRuntime` 与 `ctx.tools.register()` 约定。
 - [MCP 客户端插件 Agent Note](../../../.agents/notes/implemented/feature/2026-07-07-mcp-client-plugin.zh.md)——命名不变式、发现与执行设计、备选方案与后果。
-- [MCP 客户端自动重连 Agent Note](../../../.agents/notes/implemented/feature/2026-08-06-mcp-client-auto-reconnect.zh.md)——重连策略、尝试预算与退出开关的依据。
 - [规范工具输出约定 Agent Note](../../../.agents/notes/implemented/architecture/2026-07-20-canonical-tool-output-contract.zh.md)——MCP 结果如何映射进规范工具输出约定。
 - [第三方记忆 MCP 指南](../../../docs/user/guide/mcp-memory.zh.md)——使用本包的三份记忆服务器 overlay。
 - [生成配置目录](../../../docs/config-catalog.zh.md#deepseek-aidsh-mcp-client)——每个受支持配置字段及其源声明。

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@deepseek-ai/dsh-mcp-client",
   "description": "MCP client bridge: connects to MCP servers and registers their tools on ctx.tools",
-  "version": "0.1.2-alpha.5",
+  "version": "0.1.3-alpha.2",
   "publishConfig": {
     "access": "public"
   },
@@ -27,13 +27,13 @@
   ],
   "license": "MIT",
   "peerDependencies": {
-    "@deepseek-ai/dsh-attachment": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-llm": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-subprocess": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-timeout": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-tools": "^0.1.2-alpha.5",
-    "@deepseek-ai/cordis": "^4.0.2",
-    "@deepseek-ai/dsh-scope": "^0.1.2-alpha.5"
+    "@deepseek-ai/dsh-attachment": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-llm": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-scope": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-subprocess": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-timeout": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-tools": "^0.1.3-alpha.2",
+    "@deepseek-ai/cordis": "^4.0.2"
   },
   "dependencies": {
     "@modelcontextprotocol/sdk": "^1.12.0",
@@ -43,13 +43,14 @@
   "devDependencies": {
     "@modelcontextprotocol/server-everything": "^2026.7.4",
     "@modelcontextprotocol/server-filesystem": "^2026.7.4",
-    "@deepseek-ai/dsh-scope": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-attachment-local": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-subprocess": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-llm": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-attachment": "^0.1.2-alpha.5",
-    "@deepseek-ai/dsh-timeout": "^0.1.2-alpha.5",
+    "@deepseek-ai/dsh-attachment": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-attachment-local": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-llm": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-scope": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-subprocess": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-timeout": "^0.1.3-alpha.2",
+    "@deepseek-ai/dsh-tools": "^0.1.3-alpha.2",
     "@deepseek-ai/cordis": "^4.0.2",
-    "@deepseek-ai/dsh-tools": "^0.1.2-alpha.5"
+    "@deepseek-ai/dsh-http-proxy": "^0.1.3-alpha.2"
   }
 }