@deepseek-ai/dsh-client-ui-settings-models 0.1.0-rc.8 → 0.1.1-rc.2

package/README.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write packages/client/ui-settings-models/README.md
-README.md: 0d76d5f31585721ad8f5cd76dd223d72353fdd0c
-README.zh.md: 8ac336245c9d82420c10132b3b935cf00f5ea889
+README.md: 781d7a8134c8118ddf4a78f3ee153a8043bae0a6
+README.zh.md: 71c629dc6b0afd447e999d040328246677f75235

package/README.md

@@ -10,7 +10,7 @@ The notice step owns its exact copy and version in `src/onboarding-copy.ts`. On
 
 After that notice completes, the DeepSeek step projects first-run readiness from the same joined Models snapshot. ANY provider the user can already reach ends it without rendering — a registered route whose named credential reference is stored, including a read-only launch-environment credential, or one whose profile names no reference and therefore authenticates natively. Only a user with none is asked for the official DeepSeek key. A mounted, active adapter with a missing writable reference renders the existing `ProviderEditor` in credential-only mode inside the shared onboarding modal; `credentials.set` stays the only secret write, and no provider settings are changed. Configure later completes only this coordinator pass. An absent adapter, inactive route, failed join, read-only deployment, or unusable settings or credential capability completes the step without rendering; Models remains the diagnostic surface.
 
-Every edit lands as `settings.mutate` path ops against the stored section — a set per changed field, an unset per cleared one, and a single unset for a deleted provider row. The page only ever holds the REDACTED descriptor, so it mutates the fields it can see rather than rebuilding a section. DeepSeek's `models` is one replace-by-value array: the editor shows inherited effective rows until the first model edit materializes the complete array in the user layer, while reset unsets that override. A row carries the model id and display name; its context window and output cap sit behind the row's own disclosure, with the same fields the pi-ai provider form uses. Either capacity is typed as a count with an optional decimal `K` or `M` suffix (`256K`, `1M`; `1M` is 1000K) and stored as the plain count, spelled back in the shortest form that round-trips. Empty ids, duplicate ids, empty explicit names, and unreadable, non-positive, or fractional capacities fail before any write. A typed API key is judged on its own field the same way: after trimming, it must be non-empty and every character must be printable ASCII (`[\x21-\x7E]`), which is exactly what an HTTP header value can carry — the twin of `normalizeApiKey` in `@deepseek-ai/dsh-llm`, mirrored here because the source-plane split forbids importing it. A value matching a pasted `NAME=value` environment line or wrapped in matching quotes is refused as the same format failure; that pasted-line check runs only in the browser, since a false positive in a resolver would leave the environment refusing the key as well. A field holding only whitespace fails rather than being silently dropped, while an empty field is not a failure at all: it means keep the stored key on an editor card, and authenticate some other way on a create card. A refused key blocks both the write and the endpoint interrogation, so the page never spends a round trip to be told what the field already says. Each settings write carries the card's current `revision`, so a concurrent write from another tab or an external `settings.yaml` edit is refused as `settings-conflict`; after settings commit, the card adopts the returned redacted user subtree and revision before storing the credential, which makes a failed credential stage retry only that stage. Deletion removes a configured, writable credential only when the profile names the page's derived `<ROUTE>_API_KEY` target, then unsets the profile; both operations are idempotent, and a partial failure remains in the identified confirmation dialog for retry. Environment credentials, custom references, and credentials whose target cannot be identified remain untouched. Once loaded, the page subscribes directly to forwarded `settings/document-updated`, `credentials/updated`, and `llm/adapters-updated` owner events, plus local `connection/reset`, so an external `settings.yaml` edit, a second tab, or a settings-born route converges without polling.
+Every edit lands as `settings.mutate` path ops against the stored section — a set per changed field, an unset per cleared one, and a single unset for a deleted provider row. The page only ever holds the REDACTED descriptor, so it mutates the fields it can see rather than rebuilding a section. DeepSeek's `models` is one replace-by-value array: the editor shows inherited effective rows until the first model edit materializes the complete array in the user layer, while reset unsets that override. A row carries the model id and display name; its context window and output cap sit behind the row's own disclosure, with the same fields the pi-ai provider form uses. Either capacity is typed as a count with an optional decimal `K` or `M` suffix (`256K`, `1M`; `1M` is 1000K) and stored as the plain count, spelled back in the shortest form that round-trips. Empty ids, duplicate ids, empty explicit names, and unreadable, non-positive, or fractional capacities fail before any write. A typed API key is judged on its own field the same way: after trimming, it must be non-empty and every character must be printable ASCII (`[\x21-\x7E]`), which is exactly what an HTTP header value can carry — the twin of `normalizeApiKey` in `@deepseek-ai/dsh-llm`, mirrored here because the source-plane split forbids importing it. A value matching a pasted `NAME=value` environment line or wrapped in matching quotes is refused as the same format failure; that pasted-line check runs only in the browser, since a false positive in a resolver would leave the environment refusing the key as well. A field holding only whitespace fails rather than being silently dropped, while an empty field is not a failure at all: it means keep the stored key on an editor card, and authenticate some other way on a create card. A refused key blocks both the write and the endpoint interrogation, so the page never spends a round trip to be told what the field already says. Each settings write carries the card's current `revision`, so a concurrent write from another tab or an external `settings.yaml` edit is refused as `settings-conflict`; after settings commit, the card adopts the returned redacted user subtree and revision before storing the credential, which makes a failed credential stage retry only that stage. Deletion removes a configured, writable credential only when the profile names the page's derived `<ROUTE>_API_KEY` target, then unsets the profile; both operations are idempotent, and a partial failure remains in the identified confirmation dialog for retry. Environment credentials, custom references, and credentials whose target cannot be identified remain untouched. Once loaded, the page subscribes directly to forwarded `settings/document-updated`, `credentials/reference-updated`, and `llm/adapters-updated` owner events, plus local `connection/reset`, so an external `settings.yaml` edit, a second tab, or a settings-born route converges without polling.
 
 ## Model list and endpoint interrogation
 

package/README.zh.md

@@ -10,7 +10,7 @@
 
 声明完成后，DeepSeek 步骤会从同一个 Models 联接快照得出首次运行就绪状态。只要用户已经能触达**任何**一个提供方，它就直接完成而不渲染——已注册且其具名凭据引用已存储的路由（包括来自启动环境且只读的凭据），或 profile 根本不指名引用、因而走原生认证的路由。只有二者皆无的用户才会被要求填写 DeepSeek 官方密钥。适配器已挂载且活跃、引用可写但尚未配置时，既有 `ProviderEditor` 会以仅凭据模式渲染在共用引导弹窗中；`credentials.set` 仍是唯一的 secret 写入，且不会改变提供方设置。「稍后配置」只完成协调器当前这一轮。适配器缺失、路由不活跃、联接失败、部署只读或设置／凭据能力不可用时，该步骤不渲染并直接完成；Models 页仍是诊断界面。
 
-每一次编辑都以 `settings.mutate` 的路径 op 落到已存分节上——每个变更字段一条 set、每个清空字段一条 unset、删除提供方行则是单独一条 unset。页面自始至终只持有**脱敏后**的 descriptor，因此它只修改自己看得见的字段，而不重建分节。DeepSeek 的 `models` 是一个按值整体替换的数组：编辑器会显示继承而来的生效模型行，直到第一次模型编辑将完整数组具化到用户层；重置则会取消该覆盖。每个模型行承载模型 ID 与显示名称，其上下文窗口与最大输出 token 数则收在该行自己的折叠区里，使用与 pi-ai 提供方表单相同的字段。两项容量都按数值键入，可带十进制的 `K` 或 `M` 后缀（`256K`、`1M`；`1M` 即 1000K），存储为纯数值，回显时写成能够往返的最短形式。空 ID、重复 ID、显式填写的空名称，以及无法读取、非正数或非整数的容量都会在写入前失败。键入的 API 密钥同样在它自己的字段上被判定：trim 之后必须非空，且每个字符都是可打印 ASCII（`[\x21-\x7E]`）——这正是 HTTP 标头值所能承载的范围，是 `@deepseek-ai/dsh-llm` 中 `normalizeApiKey` 的孪生体，因源码平面分割禁止直接引入而在此镜像。与整行粘贴的 `NAME=value` 环境变量匹配或首尾成对引号包裹的值，会以同一条格式失败被拒绝；这项粘贴行检查只在浏览器中运行，因为 resolver 中的一次误判会连带让环境变量这条路也拒绝该密钥。只含空白的输入框会失败而不是被静默丢弃；留空则完全不是失败：在编辑卡片上意味着保持已存储的密钥，在新建卡片上则意味着以其他方式鉴权。被拒绝的密钥会同时拦截写入与端点探测，因此页面不会白花一次往返去换取字段上已经写明的答案。每次 settings 写入都携带卡片当前的 `revision`，因此来自另一个标签页或对 `settings.yaml` 的外部编辑所产生的并发写入会以 `settings-conflict` 被拒绝；settings 提交成功后，卡片会在存储凭据前采用响应返回的脱敏用户子树与 revision，因此凭据阶段失败时，重试只会重复该阶段。删除操作只会在 profile 指向页面派生的 `<ROUTE>_API_KEY` 目标时清除已配置且可写的凭据，随后取消设置 profile；两项操作都具备幂等性，部分失败会停留在点名目标的确认对话框中供重试。环境凭据、自定义引用和无法识别目标的凭据保持不变。页面加载完成后会直接订阅转发的 owner 事件 `settings/document-updated`、`credentials/updated`、`llm/adapters-updated`，以及本地 `connection/reset`，因此外部的 `settings.yaml` 编辑、第二个标签页或 settings 新生的路由都无需轮询即可收敛。
+每一次编辑都以 `settings.mutate` 的路径 op 落到已存分节上——每个变更字段一条 set、每个清空字段一条 unset、删除提供方行则是单独一条 unset。页面自始至终只持有**脱敏后**的 descriptor，因此它只修改自己看得见的字段，而不重建分节。DeepSeek 的 `models` 是一个按值整体替换的数组：编辑器会显示继承而来的生效模型行，直到第一次模型编辑将完整数组具化到用户层；重置则会取消该覆盖。每个模型行承载模型 ID 与显示名称，其上下文窗口与最大输出 token 数则收在该行自己的折叠区里，使用与 pi-ai 提供方表单相同的字段。两项容量都按数值键入，可带十进制的 `K` 或 `M` 后缀（`256K`、`1M`；`1M` 即 1000K），存储为纯数值，回显时写成能够往返的最短形式。空 ID、重复 ID、显式填写的空名称，以及无法读取、非正数或非整数的容量都会在写入前失败。键入的 API 密钥同样在它自己的字段上被判定：trim 之后必须非空，且每个字符都是可打印 ASCII（`[\x21-\x7E]`）——这正是 HTTP 标头值所能承载的范围，是 `@deepseek-ai/dsh-llm` 中 `normalizeApiKey` 的孪生体，因源码平面分割禁止直接引入而在此镜像。与整行粘贴的 `NAME=value` 环境变量匹配或首尾成对引号包裹的值，会以同一条格式失败被拒绝；这项粘贴行检查只在浏览器中运行，因为 resolver 中的一次误判会连带让环境变量这条路也拒绝该密钥。只含空白的输入框会失败而不是被静默丢弃；留空则完全不是失败：在编辑卡片上意味着保持已存储的密钥，在新建卡片上则意味着以其他方式鉴权。被拒绝的密钥会同时拦截写入与端点探测，因此页面不会白花一次往返去换取字段上已经写明的答案。每次 settings 写入都携带卡片当前的 `revision`，因此来自另一个标签页或对 `settings.yaml` 的外部编辑所产生的并发写入会以 `settings-conflict` 被拒绝；settings 提交成功后，卡片会在存储凭据前采用响应返回的脱敏用户子树与 revision，因此凭据阶段失败时，重试只会重复该阶段。删除操作只会在 profile 指向页面派生的 `<ROUTE>_API_KEY` 目标时清除已配置且可写的凭据，随后取消设置 profile；两项操作都具备幂等性，部分失败会停留在点名目标的确认对话框中供重试。环境凭据、自定义引用和无法识别目标的凭据保持不变。页面加载完成后会直接订阅转发的 owner 事件 `settings/document-updated`、`credentials/reference-updated`、`llm/adapters-updated`，以及本地 `connection/reset`，因此外部的 `settings.yaml` 编辑、第二个标签页或 settings 新生的路由都无需轮询即可收敛。
 
 ## 模型列表与端点询问
 
@@ -30,7 +30,7 @@ pi-ai profile 的 `models` 列表就在卡片上编辑：一行一个模型，
 
 ## 已知限制与暂缓事项
 
-- **卡片上可编辑的只有 API 密钥与精选折叠区字段**：手写编辑器用 schema 通用的字段覆盖面换来了设计稿上的布局（[Agent Note](../../../.agents/notes/implemented/architecture/2026-07-30-web-config-plane.md)）。两个家族都公开 `baseURL` 与模型的 `id`/`name`/`contextWindow`/`maxTokens`；手工声明的 pi-ai 路由还公开 `displayName` 与 `api`。重试策略、超时、DeepSeek 模型说明及其他进阶字段仍留在 `settings.yaml` 中；编辑器未展示的现有模型字段会予以保留。不带这些约定字段的 profile schema 只渲染该提示，两套精选布局则以 `llm-deepseek`/`llm-pi-ai` 这两个 namespace 的名字为键。
+- **卡片上可编辑的只有 API 密钥与精选折叠区字段**：手写编辑器用 schema 通用的字段覆盖面换来了设计稿上的布局（[Agent Note](../../../.agents/notes/implemented/architecture/2026-07-30-web-config-plane.zh.md)）。两个家族都公开 `baseURL` 与模型的 `id`/`name`/`contextWindow`/`maxTokens`；手工声明的 pi-ai 路由还公开 `displayName` 与 `api`。重试策略、超时、DeepSeek 模型说明及其他进阶字段仍留在 `settings.yaml` 中；编辑器未展示的现有模型字段会予以保留。不带这些约定字段的 profile schema 只渲染该提示，两套精选布局则以 `llm-deepseek`/`llm-pi-ai` 这两个 namespace 的名字为键。
 - **凭据清理范围刻意保持狭窄**：删除一行时，仅当其引用与页面派生的 `<ROUTE>_API_KEY` 目标完全一致，才会清除已配置且可写的凭据。自定义引用、环境凭据和无法识别的目标会保留，因为该行无法证明自己拥有它们。
 - **只有 pi-ai 路由可以手工声明**：自定义提供方卡片写入 `llm-pi-ai`——唯一一个其 profile 描述整个提供方的 namespace。`llm-deepseek` 路由是组合面的事实，不是本页能创建的东西。
 - **询问只覆盖 OpenAI 兼容端点**：适配器只读这种模型列表响应格式，因此讲其他协议的网关会报告自己无法被询问，其模型需手工填写。

package/lib/client.js

@@ -2772,7 +2772,7 @@ window.__ModuleLoader__.load({
 					ctx.remote.$on("settings/document-updated", () => {
 						refreshModels();
 					}),
-					ctx.remote.$on("credentials/updated", refreshModels),
+					ctx.remote.$on("credentials/reference-updated", refreshModels),
 					ctx.remote.$on("llm/adapters-updated", refreshModels),
 					ctx.on("connection/reset", refreshModels)
 				];

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@deepseek-ai/dsh-client-ui-settings-models",
   "description": "Models settings and shared product-onboarding dialogs over existing settings and credential joins",
-  "version": "0.1.0-rc.8",
+  "version": "0.1.1-rc.2",
   "publishConfig": {
     "access": "public"
   },
@@ -43,25 +43,25 @@
   "license": "MIT",
   "peerDependencies": {
     "@deepseek-ai/cordis": "^4.0.1",
-    "@deepseek-ai/dsh-api-remotes": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-connection": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-runtime": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-invariants": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-locale": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-ui-settings": "^0.1.0-rc.8"
+    "@deepseek-ai/dsh-api-remotes": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-runtime": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-invariants": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-ui-settings": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-locale": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-connection": "^0.1.1-rc.2"
   },
   "devDependencies": {
     "@types/react": "~18.3.1",
     "react": "^18.2.0",
-    "@deepseek-ai/dsh-client-connection": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-locale": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-api-remotes": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-runtime": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-test-runtime": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-ui-primitives": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-ui-slots": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-client-ui-settings": "^0.1.0-rc.8",
-    "@deepseek-ai/dsh-invariants": "^0.1.0-rc.8",
+    "@deepseek-ai/dsh-client-connection": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-api-remotes": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-locale": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-runtime": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-test-runtime": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-ui-primitives": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-ui-settings": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-client-ui-slots": "^0.1.1-rc.2",
+    "@deepseek-ai/dsh-invariants": "^0.1.1-rc.2",
     "@deepseek-ai/cordis": "^4.0.1"
   },
   "files": [