@dedot/chaintypes 0.239.0 → 0.240.0

package/westend-people/tx.d.ts

@@ -874,14 +874,16 @@ export interface ChainTx<
   session: {
     /**
      * Sets the session key(s) of the function caller to `keys`.
+     *
      * Allows an account to set its session key prior to becoming a validator.
      * This doesn't take effect until the next session.
      *
-     * The dispatch origin of this function must be signed.
-     *
-     * ## Complexity
-     * - `O(1)`. Actual cost depends on the number of length of `T::Keys::key_ids()` which is
-     * fixed.
+     * - `origin`: The dispatch origin of this function must be signed.
+     * - `keys`: The new session keys to set. These are the public keys of all sessions keys
+     * setup in the runtime.
+     * - `proof`: The proof that `origin` has access to the private keys of `keys`. See
+     * [`impl_opaque_keys`](sp_runtime::impl_opaque_keys) for more information about the
+     * proof format.
      *
      * @param {PeopleWestendRuntimeSessionKeys} keys
      * @param {BytesLike} proof
@@ -912,10 +914,6 @@ export interface ChainTx<
      * means being a controller account) or directly convertible into a validator ID (which
      * usually means being a stash account).
      *
-     * ## Complexity
-     * - `O(1)` in number of key types. Actual cost depends on the number of length of
-     * `T::Keys::key_ids()` which is fixed.
-     *
      **/
     purgeKeys: GenericTxCall<
       () => ChainSubmittableExtrinsic<
@@ -2080,7 +2078,9 @@ export interface ChainTx<
      * Register approval for a dispatch to be made from a deterministic composite account if
      * approved by a total of `threshold - 1` of `other_signatories`.
      *
-     * If there are enough, then dispatch the call.
+     * **If the approval threshold is met (including the sender's approval), this will
+     * immediately execute the call.** This is the only way to execute a multisig call -
+     * `approve_as_multi` will never trigger execution.
      *
      * Payment: `DepositBase` will be reserved if this is the first approval, plus
      * `threshold` times `DepositFactor`. It is returned once this dispatch happens or
@@ -2096,8 +2096,9 @@ export interface ChainTx<
      * transaction index) of the first approval transaction.
      * - `call`: The call to be executed.
      *
-     * NOTE: Unless this is the final approval, you will generally want to use
-     * `approve_as_multi` instead, since it only requires a hash of the call.
+     * NOTE: For intermediate approvals (not the final approval), you should generally use
+     * `approve_as_multi` instead, since it only requires a hash of the call and is more
+     * efficient.
      *
      * Result is equivalent to the dispatched result if `threshold` is exactly `1`. Otherwise
      * on success, result is `Ok` and the result from the interior call, if it was executed,
@@ -2152,6 +2153,13 @@ export interface ChainTx<
      * Register approval for a dispatch to be made from a deterministic composite account if
      * approved by a total of `threshold - 1` of `other_signatories`.
      *
+     * **This function will NEVER execute the call, even if the approval threshold is
+     * reached.** It only registers approval. To actually execute the call, `as_multi` must
+     * be called with the full call data by any of the signatories.
+     *
+     * This function is more efficient than `as_multi` for intermediate approvals since it
+     * only requires the call hash, not the full call data.
+     *
      * Payment: `DepositBase` will be reserved if this is the first approval, plus
      * `threshold` times `DepositFactor`. It is returned once this dispatch happens or
      * is cancelled.
@@ -2166,7 +2174,8 @@ export interface ChainTx<
      * transaction index) of the first approval transaction.
      * - `call_hash`: The hash of the call to be executed.
      *
-     * NOTE: If this is the final approval, you will want to use `as_multi` instead.
+     * NOTE: To execute the call after approvals are gathered, any signatory must call
+     * `as_multi` with the full call data. This function cannot execute the call.
      *
      * ## Complexity
      * - `O(S)`.

package/westend-people/types.d.ts

@@ -703,14 +703,16 @@ export type PalletCollatorSelectionCallLike =
 export type PalletSessionCall =
   /**
    * Sets the session key(s) of the function caller to `keys`.
+   *
    * Allows an account to set its session key prior to becoming a validator.
    * This doesn't take effect until the next session.
    *
-   * The dispatch origin of this function must be signed.
-   *
-   * ## Complexity
-   * - `O(1)`. Actual cost depends on the number of length of `T::Keys::key_ids()` which is
-   * fixed.
+   * - `origin`: The dispatch origin of this function must be signed.
+   * - `keys`: The new session keys to set. These are the public keys of all sessions keys
+   * setup in the runtime.
+   * - `proof`: The proof that `origin` has access to the private keys of `keys`. See
+   * [`impl_opaque_keys`](sp_runtime::impl_opaque_keys) for more information about the
+   * proof format.
    **/
   | { name: 'SetKeys'; params: { keys: PeopleWestendRuntimeSessionKeys; proof: Bytes } }
   /**
@@ -722,24 +724,22 @@ export type PalletSessionCall =
    * convertible to a validator ID using the chain's typical addressing system (this usually
    * means being a controller account) or directly convertible into a validator ID (which
    * usually means being a stash account).
-   *
-   * ## Complexity
-   * - `O(1)` in number of key types. Actual cost depends on the number of length of
-   * `T::Keys::key_ids()` which is fixed.
    **/
   | { name: 'PurgeKeys' };
 
 export type PalletSessionCallLike =
   /**
    * Sets the session key(s) of the function caller to `keys`.
+   *
    * Allows an account to set its session key prior to becoming a validator.
    * This doesn't take effect until the next session.
    *
-   * The dispatch origin of this function must be signed.
-   *
-   * ## Complexity
-   * - `O(1)`. Actual cost depends on the number of length of `T::Keys::key_ids()` which is
-   * fixed.
+   * - `origin`: The dispatch origin of this function must be signed.
+   * - `keys`: The new session keys to set. These are the public keys of all sessions keys
+   * setup in the runtime.
+   * - `proof`: The proof that `origin` has access to the private keys of `keys`. See
+   * [`impl_opaque_keys`](sp_runtime::impl_opaque_keys) for more information about the
+   * proof format.
    **/
   | { name: 'SetKeys'; params: { keys: PeopleWestendRuntimeSessionKeys; proof: BytesLike } }
   /**
@@ -751,10 +751,6 @@ export type PalletSessionCallLike =
    * convertible to a validator ID using the chain's typical addressing system (this usually
    * means being a controller account) or directly convertible into a validator ID (which
    * usually means being a stash account).
-   *
-   * ## Complexity
-   * - `O(1)` in number of key types. Actual cost depends on the number of length of
-   * `T::Keys::key_ids()` which is fixed.
    **/
   | { name: 'PurgeKeys' };
 
@@ -2647,7 +2643,9 @@ export type PalletMultisigCall =
    * Register approval for a dispatch to be made from a deterministic composite account if
    * approved by a total of `threshold - 1` of `other_signatories`.
    *
-   * If there are enough, then dispatch the call.
+   * **If the approval threshold is met (including the sender's approval), this will
+   * immediately execute the call.** This is the only way to execute a multisig call -
+   * `approve_as_multi` will never trigger execution.
    *
    * Payment: `DepositBase` will be reserved if this is the first approval, plus
    * `threshold` times `DepositFactor`. It is returned once this dispatch happens or
@@ -2663,8 +2661,9 @@ export type PalletMultisigCall =
    * transaction index) of the first approval transaction.
    * - `call`: The call to be executed.
    *
-   * NOTE: Unless this is the final approval, you will generally want to use
-   * `approve_as_multi` instead, since it only requires a hash of the call.
+   * NOTE: For intermediate approvals (not the final approval), you should generally use
+   * `approve_as_multi` instead, since it only requires a hash of the call and is more
+   * efficient.
    *
    * Result is equivalent to the dispatched result if `threshold` is exactly `1`. Otherwise
    * on success, result is `Ok` and the result from the interior call, if it was executed,
@@ -2698,6 +2697,13 @@ export type PalletMultisigCall =
    * Register approval for a dispatch to be made from a deterministic composite account if
    * approved by a total of `threshold - 1` of `other_signatories`.
    *
+   * **This function will NEVER execute the call, even if the approval threshold is
+   * reached.** It only registers approval. To actually execute the call, `as_multi` must
+   * be called with the full call data by any of the signatories.
+   *
+   * This function is more efficient than `as_multi` for intermediate approvals since it
+   * only requires the call hash, not the full call data.
+   *
    * Payment: `DepositBase` will be reserved if this is the first approval, plus
    * `threshold` times `DepositFactor`. It is returned once this dispatch happens or
    * is cancelled.
@@ -2712,7 +2718,8 @@ export type PalletMultisigCall =
    * transaction index) of the first approval transaction.
    * - `call_hash`: The hash of the call to be executed.
    *
-   * NOTE: If this is the final approval, you will want to use `as_multi` instead.
+   * NOTE: To execute the call after approvals are gathered, any signatory must call
+   * `as_multi` with the full call data. This function cannot execute the call.
    *
    * ## Complexity
    * - `O(S)`.
@@ -2811,7 +2818,9 @@ export type PalletMultisigCallLike =
    * Register approval for a dispatch to be made from a deterministic composite account if
    * approved by a total of `threshold - 1` of `other_signatories`.
    *
-   * If there are enough, then dispatch the call.
+   * **If the approval threshold is met (including the sender's approval), this will
+   * immediately execute the call.** This is the only way to execute a multisig call -
+   * `approve_as_multi` will never trigger execution.
    *
    * Payment: `DepositBase` will be reserved if this is the first approval, plus
    * `threshold` times `DepositFactor`. It is returned once this dispatch happens or
@@ -2827,8 +2836,9 @@ export type PalletMultisigCallLike =
    * transaction index) of the first approval transaction.
    * - `call`: The call to be executed.
    *
-   * NOTE: Unless this is the final approval, you will generally want to use
-   * `approve_as_multi` instead, since it only requires a hash of the call.
+   * NOTE: For intermediate approvals (not the final approval), you should generally use
+   * `approve_as_multi` instead, since it only requires a hash of the call and is more
+   * efficient.
    *
    * Result is equivalent to the dispatched result if `threshold` is exactly `1`. Otherwise
    * on success, result is `Ok` and the result from the interior call, if it was executed,
@@ -2862,6 +2872,13 @@ export type PalletMultisigCallLike =
    * Register approval for a dispatch to be made from a deterministic composite account if
    * approved by a total of `threshold - 1` of `other_signatories`.
    *
+   * **This function will NEVER execute the call, even if the approval threshold is
+   * reached.** It only registers approval. To actually execute the call, `as_multi` must
+   * be called with the full call data by any of the signatories.
+   *
+   * This function is more efficient than `as_multi` for intermediate approvals since it
+   * only requires the call hash, not the full call data.
+   *
    * Payment: `DepositBase` will be reserved if this is the first approval, plus
    * `threshold` times `DepositFactor`. It is returned once this dispatch happens or
    * is cancelled.
@@ -2876,7 +2893,8 @@ export type PalletMultisigCallLike =
    * transaction index) of the first approval transaction.
    * - `call_hash`: The hash of the call to be executed.
    *
-   * NOTE: If this is the final approval, you will want to use `as_multi` instead.
+   * NOTE: To execute the call after approvals are gathered, any signatory must call
+   * `as_multi` with the full call data. This function cannot execute the call.
    *
    * ## Complexity
    * - `O(S)`.
@@ -5137,7 +5155,10 @@ export type FrameSystemLimitsWeightsPerClass = {
   reserved?: SpWeightsWeightV2Weight | undefined;
 };
 
-export type FrameSystemLimitsBlockLength = { max: FrameSupportDispatchPerDispatchClassU32 };
+export type FrameSystemLimitsBlockLength = {
+  max: FrameSupportDispatchPerDispatchClassU32;
+  maxHeaderSize?: number | undefined;
+};
 
 export type FrameSupportDispatchPerDispatchClassU32 = { normal: number; operational: number; mandatory: number };
 
@@ -6080,6 +6101,21 @@ export type PalletMigrationsError =
    **/
   'Ongoing';
 
+export type PalletMigrationsMbmIsOngoing = 'Yes' | 'No' | 'Stuck';
+
+export type PalletMigrationsMbmProgress = {
+  currentMigration: number;
+  totalMigrations: number;
+  currentMigrationSteps: number;
+  currentMigrationMaxSteps?: number | undefined;
+};
+
+export type PalletMigrationsMbmStatus = {
+  ongoing: PalletMigrationsMbmIsOngoing;
+  progress?: PalletMigrationsMbmProgress | undefined;
+  prefixes: Array<Bytes>;
+};
+
 export type SpConsensusSlotsSlotDuration = bigint;
 
 export type SpRuntimeBlockLazyBlock = { header: Header; extrinsics: Array<SpRuntimeOpaqueExtrinsic> };
@@ -6128,6 +6164,8 @@ export type SpRuntimeTransactionValidityValidTransaction = {
   propagate: boolean;
 };
 
+export type SpSessionRuntimeApiOpaqueGeneratedSessionKeys = { keys: Bytes; proof: Bytes };
+
 export type PalletTransactionPaymentRuntimeDispatchInfo = {
   weight: SpWeightsWeightV2Weight;
   class: FrameSupportDispatchDispatchClass;
@@ -6196,28 +6234,6 @@ export type CumulusPrimitivesCoreCollationInfo = {
 
 export type PolkadotParachainPrimitivesPrimitivesValidationCode = Bytes;
 
-export type SpStatementStoreRuntimeApiStatementSource = 'Chain' | 'Network' | 'Local';
-
-export type SpStatementStoreStatement = {
-  proof?: SpStatementStoreProof | undefined;
-  decryptionKey?: FixedBytes<32> | undefined;
-  channel?: FixedBytes<32> | undefined;
-  priority?: number | undefined;
-  numTopics: number;
-  topics: FixedArray<FixedBytes<32>, 4>;
-  data?: Bytes | undefined;
-};
-
-export type SpStatementStoreProof =
-  | { type: 'Sr25519'; value: { signature: FixedBytes<64>; signer: FixedBytes<32> } }
-  | { type: 'Ed25519'; value: { signature: FixedBytes<64>; signer: FixedBytes<32> } }
-  | { type: 'Secp256k1Ecdsa'; value: { signature: FixedBytes<65>; signer: FixedBytes<33> } }
-  | { type: 'OnChain'; value: { who: FixedBytes<32>; blockHash: FixedBytes<32>; eventIndex: bigint } };
-
-export type SpStatementStoreRuntimeApiValidStatement = { maxCount: number; maxSize: number };
-
-export type SpStatementStoreRuntimeApiInvalidStatement = 'BadProof' | 'NoProof' | 'InternalError';
-
 export type PeopleWestendRuntimeRuntimeError =
   | { pallet: 'System'; palletError: FrameSystemError }
   | { pallet: 'ParachainSystem'; palletError: CumulusPalletParachainSystemError }

package/westend-people/view-functions.d.ts

@@ -1,7 +1,14 @@
 // Generated by dedot cli
 
 import type { GenericChainViewFunctions, GenericViewFunction } from 'dedot/types';
-import type { PeopleWestendRuntimeRuntimeCallLike, PeopleWestendRuntimeProxyType } from './types.js';
+import type { Bytes } from 'dedot/codecs';
+import type {
+  PeopleWestendRuntimeRuntimeCallLike,
+  PeopleWestendRuntimeProxyType,
+  PalletMigrationsMbmIsOngoing,
+  PalletMigrationsMbmProgress,
+  PalletMigrationsMbmStatus,
+} from './types.js';
 
 export interface ChainViewFunctions extends GenericChainViewFunctions {
   /**
@@ -28,6 +35,40 @@ export interface ChainViewFunctions extends GenericChainViewFunctions {
       (toCheck: PeopleWestendRuntimeProxyType, against: PeopleWestendRuntimeProxyType) => Promise<boolean>
     >;
 
+    /**
+     * Generic pallet view function
+     **/
+    [name: string]: GenericViewFunction;
+  };
+  /**
+   * Pallet `MultiBlockMigrations`'s view functions
+   **/
+  multiBlockMigrations: {
+    /**
+     * Returns the ongoing status of migrations.
+     **/
+    ongoingStatus: GenericViewFunction<() => Promise<PalletMigrationsMbmIsOngoing>>;
+
+    /**
+     * Returns progress information about the current migration, if any.
+     *
+     * This function provides detailed information about the current migration's progress,
+     * including the number of steps completed and the maximum allowed steps.
+     **/
+    progress: GenericViewFunction<() => Promise<PalletMigrationsMbmProgress | undefined>>;
+
+    /**
+     * Returns the storage prefixes affected by the current migration.
+     *
+     * Can be empty if the migration does not know or there are no prefixes.
+     **/
+    affectedPrefixes: GenericViewFunction<() => Promise<Array<Bytes>>>;
+
+    /**
+     * Returns the comprehensive status of multi-block migrations.
+     **/
+    status: GenericViewFunction<() => Promise<PalletMigrationsMbmStatus>>;
+
     /**
      * Generic pallet view function
      **/