@dedot/chaintypes 0.197.0 → 0.199.0

package/moonbeam/types.d.ts

@@ -79,7 +79,6 @@ export type MoonbeamRuntimeRuntimeEvent =
   | { pallet: 'XcmpQueue'; palletEvent: CumulusPalletXcmpQueueEvent }
   | { pallet: 'CumulusXcm'; palletEvent: CumulusPalletXcmEvent }
   | { pallet: 'PolkadotXcm'; palletEvent: PalletXcmEvent }
-  | { pallet: 'Assets'; palletEvent: PalletAssetsEvent }
   | { pallet: 'XcmTransactor'; palletEvent: PalletXcmTransactorEvent }
   | { pallet: 'EthereumXcm'; palletEvent: PalletEthereumXcmEvent }
   | { pallet: 'MessageQueue'; palletEvent: PalletMessageQueueEvent }
@@ -1450,7 +1449,6 @@ export type MoonbeamRuntimeRuntimeCall =
   | { pallet: 'Treasury'; palletCall: PalletTreasuryCall }
   | { pallet: 'CrowdloanRewards'; palletCall: PalletCrowdloanRewardsCall }
   | { pallet: 'PolkadotXcm'; palletCall: PalletXcmCall }
-  | { pallet: 'Assets'; palletCall: PalletAssetsCall }
   | { pallet: 'XcmTransactor'; palletCall: PalletXcmTransactorCall }
   | { pallet: 'EthereumXcm'; palletCall: PalletEthereumXcmCall }
   | { pallet: 'MessageQueue'; palletCall: PalletMessageQueueCall }
@@ -1494,7 +1492,6 @@ export type MoonbeamRuntimeRuntimeCallLike =
   | { pallet: 'Treasury'; palletCall: PalletTreasuryCallLike }
   | { pallet: 'CrowdloanRewards'; palletCall: PalletCrowdloanRewardsCallLike }
   | { pallet: 'PolkadotXcm'; palletCall: PalletXcmCallLike }
-  | { pallet: 'Assets'; palletCall: PalletAssetsCallLike }
   | { pallet: 'XcmTransactor'; palletCall: PalletXcmTransactorCallLike }
   | { pallet: 'EthereumXcm'; palletCall: PalletEthereumXcmCallLike }
   | { pallet: 'MessageQueue'; palletCall: PalletMessageQueueCallLike }
@@ -2094,7 +2091,25 @@ export type PalletParachainStakingCall =
   /**
    * Set the inflation distribution configuration.
    **/
-  | { name: 'SetInflationDistributionConfig'; params: { new: PalletParachainStakingInflationDistributionConfig } };
+  | { name: 'SetInflationDistributionConfig'; params: { new: PalletParachainStakingInflationDistributionConfig } }
+  /**
+   * Batch migrate locks to freezes for a list of accounts.
+   *
+   * This function allows migrating multiple accounts from the old lock-based
+   * staking to the new freeze-based staking in a single transaction.
+   *
+   * Parameters:
+   * - `accounts`: List of tuples containing (account_id, is_collator)
+   * where is_collator indicates if the account is a collator (true) or delegator (false)
+   *
+   * The maximum number of accounts that can be migrated in one batch is MAX_ACCOUNTS_PER_MIGRATION_BATCH.
+   * The batch cannot be empty.
+   *
+   * If 50% or more of the migration attempts are successful, the entire
+   * extrinsic fee is refunded to incentivize successful batch migrations.
+   * Weight is calculated based on actual successful operations performed.
+   **/
+  | { name: 'MigrateLocksToFreezesBatch'; params: { accounts: Array<[AccountId20, boolean]> } };
 
 export type PalletParachainStakingCallLike =
   /**
@@ -2234,7 +2249,25 @@ export type PalletParachainStakingCallLike =
   /**
    * Set the inflation distribution configuration.
    **/
-  | { name: 'SetInflationDistributionConfig'; params: { new: PalletParachainStakingInflationDistributionConfig } };
+  | { name: 'SetInflationDistributionConfig'; params: { new: PalletParachainStakingInflationDistributionConfig } }
+  /**
+   * Batch migrate locks to freezes for a list of accounts.
+   *
+   * This function allows migrating multiple accounts from the old lock-based
+   * staking to the new freeze-based staking in a single transaction.
+   *
+   * Parameters:
+   * - `accounts`: List of tuples containing (account_id, is_collator)
+   * where is_collator indicates if the account is a collator (true) or delegator (false)
+   *
+   * The maximum number of accounts that can be migrated in one batch is MAX_ACCOUNTS_PER_MIGRATION_BATCH.
+   * The batch cannot be empty.
+   *
+   * If 50% or more of the migration attempts are successful, the entire
+   * extrinsic fee is refunded to incentivize successful batch migrations.
+   * Weight is calculated based on actual successful operations performed.
+   **/
+  | { name: 'MigrateLocksToFreezesBatch'; params: { accounts: Array<[AccountId20Like, boolean]> } };
 
 /**
  * Contains a variant per dispatchable extrinsic that this pallet has.
@@ -5659,20 +5692,7 @@ export type PalletCrowdloanRewardsCall =
   /**
    * Update reward address, proving that the caller owns the current native key
    **/
-  | { name: 'UpdateRewardAddress'; params: { newRewardAccount: AccountId20 } }
-  /**
-   * This extrinsic completes the initialization if some checks are fullfiled. These checks are:
-   * -The reward contribution money matches the crowdloan pot
-   * -The end vesting block is higher than the init vesting block
-   * -The initialization has not complete yet
-   **/
-  | { name: 'CompleteInitialization'; params: { leaseEndingBlock: number } }
-  /**
-   * Initialize the reward distribution storage. It shortcuts whenever an error is found
-   * This does not enforce any checks other than making sure we dont go over funds
-   * complete_initialization should perform any additional
-   **/
-  | { name: 'InitializeRewardVec'; params: { rewards: Array<[FixedBytes<32>, AccountId20 | undefined, bigint]> } };
+  | { name: 'UpdateRewardAddress'; params: { newRewardAccount: AccountId20 } };
 
 export type PalletCrowdloanRewardsCallLike =
   /**
@@ -5708,20 +5728,7 @@ export type PalletCrowdloanRewardsCallLike =
   /**
    * Update reward address, proving that the caller owns the current native key
    **/
-  | { name: 'UpdateRewardAddress'; params: { newRewardAccount: AccountId20Like } }
-  /**
-   * This extrinsic completes the initialization if some checks are fullfiled. These checks are:
-   * -The reward contribution money matches the crowdloan pot
-   * -The end vesting block is higher than the init vesting block
-   * -The initialization has not complete yet
-   **/
-  | { name: 'CompleteInitialization'; params: { leaseEndingBlock: number } }
-  /**
-   * Initialize the reward distribution storage. It shortcuts whenever an error is found
-   * This does not enforce any checks other than making sure we dont go over funds
-   * complete_initialization should perform any additional
-   **/
-  | { name: 'InitializeRewardVec'; params: { rewards: Array<[FixedBytes<32>, AccountId20Like | undefined, bigint]> } };
+  | { name: 'UpdateRewardAddress'; params: { newRewardAccount: AccountId20Like } };
 
 export type SpRuntimeMultiSignature =
   | { type: 'Ed25519'; value: FixedBytes<64> }
@@ -7093,1347 +7100,208 @@ export type XcmVersionedAssetId =
 /**
  * Contains a variant per dispatchable extrinsic that this pallet has.
  **/
-export type PalletAssetsCall =
+export type PalletXcmTransactorCall =
   /**
-   * Issue a new class of fungible assets from a public origin.
-   *
-   * This new asset class has no assets initially and its owner is the origin.
-   *
-   * The origin must conform to the configured `CreateOrigin` and have sufficient funds free.
-   *
-   * Funds of sender are reserved by `AssetDeposit`.
-   *
-   * Parameters:
-   * - `id`: The identifier of the new asset. This must not be currently in use to identify
-   * an existing asset. If [`NextAssetId`] is set, then this must be equal to it.
-   * - `admin`: The admin of this class of assets. The admin is the initial address of each
-   * member of the asset class's admin team.
-   * - `min_balance`: The minimum balance of this new asset that any single account must
-   * have. If an account's balance is reduced below this, then it collapses to zero.
+   * Register a derivative index for an account id. Dispatchable by
+   * DerivativeAddressRegistrationOrigin
    *
-   * Emits `Created` event when successful.
+   * We do not store the derivative address, but only the index. We do not need to store
+   * the derivative address to issue calls, only the index is enough
    *
-   * Weight: `O(1)`
+   * For now an index is registered for all possible destinations and not per-destination.
+   * We can change this in the future although it would just make things more complicated
    **/
-  | { name: 'Create'; params: { id: bigint; admin: AccountId20; minBalance: bigint } }
+  | { name: 'Register'; params: { who: AccountId20; index: number } }
   /**
-   * Issue a new class of fungible assets from a privileged origin.
-   *
-   * This new asset class has no assets initially.
-   *
-   * The origin must conform to `ForceOrigin`.
-   *
-   * Unlike `create`, no funds are reserved.
-   *
-   * - `id`: The identifier of the new asset. This must not be currently in use to identify
-   * an existing asset. If [`NextAssetId`] is set, then this must be equal to it.
-   * - `owner`: The owner of this class of assets. The owner has full superuser permissions
-   * over this asset, but may later change and configure the permissions using
-   * `transfer_ownership` and `set_team`.
-   * - `min_balance`: The minimum balance of this new asset that any single account must
-   * have. If an account's balance is reduced below this, then it collapses to zero.
-   *
-   * Emits `ForceCreated` event when successful.
-   *
-   * Weight: `O(1)`
+   * De-Register a derivative index. This prevents an account to use a derivative address
+   * (represented by an index) from our of our sovereign accounts anymore
    **/
-  | { name: 'ForceCreate'; params: { id: bigint; owner: AccountId20; isSufficient: boolean; minBalance: bigint } }
+  | { name: 'Deregister'; params: { index: number } }
   /**
-   * Start the process of destroying a fungible asset class.
-   *
-   * `start_destroy` is the first in a series of extrinsics that should be called, to allow
-   * destruction of an asset class.
-   *
-   * The origin must conform to `ForceOrigin` or must be `Signed` by the asset's `owner`.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
+   * Transact the inner call through a derivative account in a destination chain,
+   * using 'fee_location' to pay for the fees. This fee_location is given as a multilocation
    *
-   * It will fail with either [`Error::ContainsHolds`] or [`Error::ContainsFreezes`] if
-   * an account contains holds or freezes in place.
+   * The caller needs to have the index registered in this pallet. The fee multiasset needs
+   * to be a reserve asset for the destination transactor::multilocation.
    **/
-  | { name: 'StartDestroy'; params: { id: bigint } }
+  | {
+      name: 'TransactThroughDerivative';
+      params: {
+        dest: MoonbeamRuntimeXcmConfigTransactors;
+        index: number;
+        fee: PalletXcmTransactorCurrencyPayment;
+        innerCall: Bytes;
+        weightInfo: PalletXcmTransactorTransactWeights;
+        refund: boolean;
+      };
+    }
   /**
-   * Destroy all accounts associated with a given asset.
-   *
-   * `destroy_accounts` should only be called after `start_destroy` has been called, and the
-   * asset is in a `Destroying` state.
-   *
-   * Due to weight restrictions, this function may need to be called multiple times to fully
-   * destroy all accounts. It will destroy `RemoveItemsLimit` accounts at a time.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
+   * Transact the call through the sovereign account in a destination chain,
+   * 'fee_payer' pays for the fee
    *
-   * Each call emits the `Event::DestroyedAccounts` event.
+   * SovereignAccountDispatcherOrigin callable only
    **/
-  | { name: 'DestroyAccounts'; params: { id: bigint } }
+  | {
+      name: 'TransactThroughSovereign';
+      params: {
+        dest: XcmVersionedLocation;
+        feePayer?: AccountId20 | undefined;
+        fee: PalletXcmTransactorCurrencyPayment;
+        call: Bytes;
+        originKind: XcmV3OriginKind;
+        weightInfo: PalletXcmTransactorTransactWeights;
+        refund: boolean;
+      };
+    }
   /**
-   * Destroy all approvals associated with a given asset up to the max (T::RemoveItemsLimit).
-   *
-   * `destroy_approvals` should only be called after `start_destroy` has been called, and the
-   * asset is in a `Destroying` state.
-   *
-   * Due to weight restrictions, this function may need to be called multiple times to fully
-   * destroy all approvals. It will destroy `RemoveItemsLimit` approvals at a time.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
-   *
-   * Each call emits the `Event::DestroyedApprovals` event.
+   * Change the transact info of a location
    **/
-  | { name: 'DestroyApprovals'; params: { id: bigint } }
+  | {
+      name: 'SetTransactInfo';
+      params: {
+        location: XcmVersionedLocation;
+        transactExtraWeight: SpWeightsWeightV2Weight;
+        maxWeight: SpWeightsWeightV2Weight;
+        transactExtraWeightSigned?: SpWeightsWeightV2Weight | undefined;
+      };
+    }
   /**
-   * Complete destroying asset and unreserve currency.
-   *
-   * `finish_destroy` should only be called after `start_destroy` has been called, and the
-   * asset is in a `Destroying` state. All accounts or approvals should be destroyed before
-   * hand.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
-   *
-   * Each successful call emits the `Event::Destroyed` event.
+   * Remove the transact info of a location
    **/
-  | { name: 'FinishDestroy'; params: { id: bigint } }
+  | { name: 'RemoveTransactInfo'; params: { location: XcmVersionedLocation } }
   /**
-   * Mint assets of a particular class.
-   *
-   * The origin must be Signed and the sender must be the Issuer of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to have some amount minted.
-   * - `beneficiary`: The account to be credited with the minted assets.
-   * - `amount`: The amount of the asset to be minted.
-   *
-   * Emits `Issued` event when successful.
+   * Transact the call through the a signed origin in this chain
+   * that should be converted to a transaction dispatch account in the destination chain
+   * by any method implemented in the destination chains runtime
    *
-   * Weight: `O(1)`
-   * Modes: Pre-existing balance of `beneficiary`; Account pre-existence of `beneficiary`.
+   * This time we are giving the currency as a currencyId instead of multilocation
    **/
-  | { name: 'Mint'; params: { id: bigint; beneficiary: AccountId20; amount: bigint } }
+  | {
+      name: 'TransactThroughSigned';
+      params: {
+        dest: XcmVersionedLocation;
+        fee: PalletXcmTransactorCurrencyPayment;
+        call: Bytes;
+        weightInfo: PalletXcmTransactorTransactWeights;
+        refund: boolean;
+      };
+    }
   /**
-   * Reduce the balance of `who` by as much as possible up to `amount` assets of `id`.
-   *
-   * Origin must be Signed and the sender should be the Manager of the asset `id`.
-   *
-   * Bails with `NoAccount` if the `who` is already dead.
-   *
-   * - `id`: The identifier of the asset to have some amount burned.
-   * - `who`: The account to be debited from.
-   * - `amount`: The maximum amount by which `who`'s balance should be reduced.
-   *
-   * Emits `Burned` with the actual amount burned. If this takes the balance to below the
-   * minimum for the asset, then the amount burned is increased to take it to zero.
-   *
-   * Weight: `O(1)`
-   * Modes: Post-existence of `who`; Pre & post Zombie-status of `who`.
+   * Set the fee per second of an asset on its reserve chain
    **/
-  | { name: 'Burn'; params: { id: bigint; who: AccountId20; amount: bigint } }
+  | { name: 'SetFeePerSecond'; params: { assetLocation: XcmVersionedLocation; feePerSecond: bigint } }
   /**
-   * Move some assets from the sender account to another.
-   *
-   * Origin must be Signed.
-   *
-   * - `id`: The identifier of the asset to have some amount transferred.
-   * - `target`: The account to be credited.
-   * - `amount`: The amount by which the sender's balance of assets should be reduced and
-   * `target`'s balance increased. The amount actually transferred may be slightly greater in
-   * the case that the transfer would otherwise take the sender balance above zero but below
-   * the minimum balance. Must be greater than zero.
-   *
-   * Emits `Transferred` with the actual amount transferred. If this takes the source balance
-   * to below the minimum for the asset, then the amount transferred is increased to take it
-   * to zero.
-   *
-   * Weight: `O(1)`
-   * Modes: Pre-existence of `target`; Post-existence of sender; Account pre-existence of
-   * `target`.
+   * Remove the fee per second of an asset on its reserve chain
    **/
-  | { name: 'Transfer'; params: { id: bigint; target: AccountId20; amount: bigint } }
+  | { name: 'RemoveFeePerSecond'; params: { assetLocation: XcmVersionedLocation } }
   /**
-   * Move some assets from the sender account to another, keeping the sender account alive.
-   *
-   * Origin must be Signed.
-   *
-   * - `id`: The identifier of the asset to have some amount transferred.
-   * - `target`: The account to be credited.
-   * - `amount`: The amount by which the sender's balance of assets should be reduced and
-   * `target`'s balance increased. The amount actually transferred may be slightly greater in
-   * the case that the transfer would otherwise take the sender balance above zero but below
-   * the minimum balance. Must be greater than zero.
-   *
-   * Emits `Transferred` with the actual amount transferred. If this takes the source balance
-   * to below the minimum for the asset, then the amount transferred is increased to take it
-   * to zero.
-   *
-   * Weight: `O(1)`
-   * Modes: Pre-existence of `target`; Post-existence of sender; Account pre-existence of
-   * `target`.
+   * Manage HRMP operations
    **/
-  | { name: 'TransferKeepAlive'; params: { id: bigint; target: AccountId20; amount: bigint } }
+  | {
+      name: 'HrmpManage';
+      params: {
+        action: PalletXcmTransactorHrmpOperation;
+        fee: PalletXcmTransactorCurrencyPayment;
+        weightInfo: PalletXcmTransactorTransactWeights;
+      };
+    };
+
+export type PalletXcmTransactorCallLike =
   /**
-   * Move some assets from one account to another.
-   *
-   * Origin must be Signed and the sender should be the Admin of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to have some amount transferred.
-   * - `source`: The account to be debited.
-   * - `dest`: The account to be credited.
-   * - `amount`: The amount by which the `source`'s balance of assets should be reduced and
-   * `dest`'s balance increased. The amount actually transferred may be slightly greater in
-   * the case that the transfer would otherwise take the `source` balance above zero but
-   * below the minimum balance. Must be greater than zero.
+   * Register a derivative index for an account id. Dispatchable by
+   * DerivativeAddressRegistrationOrigin
    *
-   * Emits `Transferred` with the actual amount transferred. If this takes the source balance
-   * to below the minimum for the asset, then the amount transferred is increased to take it
-   * to zero.
+   * We do not store the derivative address, but only the index. We do not need to store
+   * the derivative address to issue calls, only the index is enough
    *
-   * Weight: `O(1)`
-   * Modes: Pre-existence of `dest`; Post-existence of `source`; Account pre-existence of
-   * `dest`.
+   * For now an index is registered for all possible destinations and not per-destination.
+   * We can change this in the future although it would just make things more complicated
    **/
-  | { name: 'ForceTransfer'; params: { id: bigint; source: AccountId20; dest: AccountId20; amount: bigint } }
+  | { name: 'Register'; params: { who: AccountId20Like; index: number } }
   /**
-   * Disallow further unprivileged transfers of an asset `id` from an account `who`. `who`
-   * must already exist as an entry in `Account`s of the asset. If you want to freeze an
-   * account that does not have an entry, use `touch_other` first.
-   *
-   * Origin must be Signed and the sender should be the Freezer of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   * - `who`: The account to be frozen.
-   *
-   * Emits `Frozen`.
-   *
-   * Weight: `O(1)`
+   * De-Register a derivative index. This prevents an account to use a derivative address
+   * (represented by an index) from our of our sovereign accounts anymore
    **/
-  | { name: 'Freeze'; params: { id: bigint; who: AccountId20 } }
+  | { name: 'Deregister'; params: { index: number } }
   /**
-   * Allow unprivileged transfers to and from an account again.
-   *
-   * Origin must be Signed and the sender should be the Admin of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   * - `who`: The account to be unfrozen.
-   *
-   * Emits `Thawed`.
+   * Transact the inner call through a derivative account in a destination chain,
+   * using 'fee_location' to pay for the fees. This fee_location is given as a multilocation
    *
-   * Weight: `O(1)`
+   * The caller needs to have the index registered in this pallet. The fee multiasset needs
+   * to be a reserve asset for the destination transactor::multilocation.
    **/
-  | { name: 'Thaw'; params: { id: bigint; who: AccountId20 } }
+  | {
+      name: 'TransactThroughDerivative';
+      params: {
+        dest: MoonbeamRuntimeXcmConfigTransactors;
+        index: number;
+        fee: PalletXcmTransactorCurrencyPayment;
+        innerCall: BytesLike;
+        weightInfo: PalletXcmTransactorTransactWeights;
+        refund: boolean;
+      };
+    }
   /**
-   * Disallow further unprivileged transfers for the asset class.
-   *
-   * Origin must be Signed and the sender should be the Freezer of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   *
-   * Emits `Frozen`.
+   * Transact the call through the sovereign account in a destination chain,
+   * 'fee_payer' pays for the fee
    *
-   * Weight: `O(1)`
+   * SovereignAccountDispatcherOrigin callable only
    **/
-  | { name: 'FreezeAsset'; params: { id: bigint } }
+  | {
+      name: 'TransactThroughSovereign';
+      params: {
+        dest: XcmVersionedLocation;
+        feePayer?: AccountId20Like | undefined;
+        fee: PalletXcmTransactorCurrencyPayment;
+        call: BytesLike;
+        originKind: XcmV3OriginKind;
+        weightInfo: PalletXcmTransactorTransactWeights;
+        refund: boolean;
+      };
+    }
   /**
-   * Allow unprivileged transfers for the asset again.
-   *
-   * Origin must be Signed and the sender should be the Admin of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be thawed.
-   *
-   * Emits `Thawed`.
-   *
-   * Weight: `O(1)`
+   * Change the transact info of a location
    **/
-  | { name: 'ThawAsset'; params: { id: bigint } }
+  | {
+      name: 'SetTransactInfo';
+      params: {
+        location: XcmVersionedLocation;
+        transactExtraWeight: SpWeightsWeightV2Weight;
+        maxWeight: SpWeightsWeightV2Weight;
+        transactExtraWeightSigned?: SpWeightsWeightV2Weight | undefined;
+      };
+    }
   /**
-   * Change the Owner of an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * - `id`: The identifier of the asset.
-   * - `owner`: The new Owner of this asset.
-   *
-   * Emits `OwnerChanged`.
-   *
-   * Weight: `O(1)`
+   * Remove the transact info of a location
    **/
-  | { name: 'TransferOwnership'; params: { id: bigint; owner: AccountId20 } }
+  | { name: 'RemoveTransactInfo'; params: { location: XcmVersionedLocation } }
   /**
-   * Change the Issuer, Admin and Freezer of an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   * - `issuer`: The new Issuer of this asset.
-   * - `admin`: The new Admin of this asset.
-   * - `freezer`: The new Freezer of this asset.
-   *
-   * Emits `TeamChanged`.
+   * Transact the call through the a signed origin in this chain
+   * that should be converted to a transaction dispatch account in the destination chain
+   * by any method implemented in the destination chains runtime
    *
-   * Weight: `O(1)`
+   * This time we are giving the currency as a currencyId instead of multilocation
    **/
-  | { name: 'SetTeam'; params: { id: bigint; issuer: AccountId20; admin: AccountId20; freezer: AccountId20 } }
+  | {
+      name: 'TransactThroughSigned';
+      params: {
+        dest: XcmVersionedLocation;
+        fee: PalletXcmTransactorCurrencyPayment;
+        call: BytesLike;
+        weightInfo: PalletXcmTransactorTransactWeights;
+        refund: boolean;
+      };
+    }
   /**
-   * Set the metadata for an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * Funds of sender are reserved according to the formula:
-   * `MetadataDepositBase + MetadataDepositPerByte * (name.len + symbol.len)` taking into
-   * account any already reserved funds.
-   *
-   * - `id`: The identifier of the asset to update.
-   * - `name`: The user friendly name of this asset. Limited in length by `StringLimit`.
-   * - `symbol`: The exchange symbol for this asset. Limited in length by `StringLimit`.
-   * - `decimals`: The number of decimals this asset uses to represent one unit.
-   *
-   * Emits `MetadataSet`.
-   *
-   * Weight: `O(1)`
+   * Set the fee per second of an asset on its reserve chain
    **/
-  | { name: 'SetMetadata'; params: { id: bigint; name: Bytes; symbol: Bytes; decimals: number } }
+  | { name: 'SetFeePerSecond'; params: { assetLocation: XcmVersionedLocation; feePerSecond: bigint } }
   /**
-   * Clear the metadata for an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * Any deposit is freed for the asset owner.
-   *
-   * - `id`: The identifier of the asset to clear.
-   *
-   * Emits `MetadataCleared`.
-   *
-   * Weight: `O(1)`
+   * Remove the fee per second of an asset on its reserve chain
    **/
-  | { name: 'ClearMetadata'; params: { id: bigint } }
+  | { name: 'RemoveFeePerSecond'; params: { assetLocation: XcmVersionedLocation } }
   /**
-   * Force the metadata for an asset to some value.
-   *
-   * Origin must be ForceOrigin.
-   *
-   * Any deposit is left alone.
-   *
-   * - `id`: The identifier of the asset to update.
-   * - `name`: The user friendly name of this asset. Limited in length by `StringLimit`.
-   * - `symbol`: The exchange symbol for this asset. Limited in length by `StringLimit`.
-   * - `decimals`: The number of decimals this asset uses to represent one unit.
-   *
-   * Emits `MetadataSet`.
-   *
-   * Weight: `O(N + S)` where N and S are the length of the name and symbol respectively.
-   **/
-  | {
-      name: 'ForceSetMetadata';
-      params: { id: bigint; name: Bytes; symbol: Bytes; decimals: number; isFrozen: boolean };
-    }
-  /**
-   * Clear the metadata for an asset.
-   *
-   * Origin must be ForceOrigin.
-   *
-   * Any deposit is returned.
-   *
-   * - `id`: The identifier of the asset to clear.
-   *
-   * Emits `MetadataCleared`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ForceClearMetadata'; params: { id: bigint } }
-  /**
-   * Alter the attributes of a given asset.
-   *
-   * Origin must be `ForceOrigin`.
-   *
-   * - `id`: The identifier of the asset.
-   * - `owner`: The new Owner of this asset.
-   * - `issuer`: The new Issuer of this asset.
-   * - `admin`: The new Admin of this asset.
-   * - `freezer`: The new Freezer of this asset.
-   * - `min_balance`: The minimum balance of this new asset that any single account must
-   * have. If an account's balance is reduced below this, then it collapses to zero.
-   * - `is_sufficient`: Whether a non-zero balance of this asset is deposit of sufficient
-   * value to account for the state bloat associated with its balance storage. If set to
-   * `true`, then non-zero balances may be stored without a `consumer` reference (and thus
-   * an ED in the Balances pallet or whatever else is used to control user-account state
-   * growth).
-   * - `is_frozen`: Whether this asset class is frozen except for permissioned/admin
-   * instructions.
-   *
-   * Emits `AssetStatusChanged` with the identity of the asset.
-   *
-   * Weight: `O(1)`
-   **/
-  | {
-      name: 'ForceAssetStatus';
-      params: {
-        id: bigint;
-        owner: AccountId20;
-        issuer: AccountId20;
-        admin: AccountId20;
-        freezer: AccountId20;
-        minBalance: bigint;
-        isSufficient: boolean;
-        isFrozen: boolean;
-      };
-    }
-  /**
-   * Approve an amount of asset for transfer by a delegated third-party account.
-   *
-   * Origin must be Signed.
-   *
-   * Ensures that `ApprovalDeposit` worth of `Currency` is reserved from signing account
-   * for the purpose of holding the approval. If some non-zero amount of assets is already
-   * approved from signing account to `delegate`, then it is topped up or unreserved to
-   * meet the right value.
-   *
-   * NOTE: The signing account does not need to own `amount` of assets at the point of
-   * making this call.
-   *
-   * - `id`: The identifier of the asset.
-   * - `delegate`: The account to delegate permission to transfer asset.
-   * - `amount`: The amount of asset that may be transferred by `delegate`. If there is
-   * already an approval in place, then this acts additively.
-   *
-   * Emits `ApprovedTransfer` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ApproveTransfer'; params: { id: bigint; delegate: AccountId20; amount: bigint } }
-  /**
-   * Cancel all of some asset approved for delegated transfer by a third-party account.
-   *
-   * Origin must be Signed and there must be an approval in place between signer and
-   * `delegate`.
-   *
-   * Unreserves any deposit previously reserved by `approve_transfer` for the approval.
-   *
-   * - `id`: The identifier of the asset.
-   * - `delegate`: The account delegated permission to transfer asset.
-   *
-   * Emits `ApprovalCancelled` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'CancelApproval'; params: { id: bigint; delegate: AccountId20 } }
-  /**
-   * Cancel all of some asset approved for delegated transfer by a third-party account.
-   *
-   * Origin must be either ForceOrigin or Signed origin with the signer being the Admin
-   * account of the asset `id`.
-   *
-   * Unreserves any deposit previously reserved by `approve_transfer` for the approval.
-   *
-   * - `id`: The identifier of the asset.
-   * - `delegate`: The account delegated permission to transfer asset.
-   *
-   * Emits `ApprovalCancelled` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ForceCancelApproval'; params: { id: bigint; owner: AccountId20; delegate: AccountId20 } }
-  /**
-   * Transfer some asset balance from a previously delegated account to some third-party
-   * account.
-   *
-   * Origin must be Signed and there must be an approval in place by the `owner` to the
-   * signer.
-   *
-   * If the entire amount approved for transfer is transferred, then any deposit previously
-   * reserved by `approve_transfer` is unreserved.
-   *
-   * - `id`: The identifier of the asset.
-   * - `owner`: The account which previously approved for a transfer of at least `amount` and
-   * from which the asset balance will be withdrawn.
-   * - `destination`: The account to which the asset balance of `amount` will be transferred.
-   * - `amount`: The amount of assets to transfer.
-   *
-   * Emits `TransferredApproved` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'TransferApproved'; params: { id: bigint; owner: AccountId20; destination: AccountId20; amount: bigint } }
-  /**
-   * Create an asset account for non-provider assets.
-   *
-   * A deposit will be taken from the signer account.
-   *
-   * - `origin`: Must be Signed; the signer account must have sufficient funds for a deposit
-   * to be taken.
-   * - `id`: The identifier of the asset for the account to be created.
-   *
-   * Emits `Touched` event when successful.
-   **/
-  | { name: 'Touch'; params: { id: bigint } }
-  /**
-   * Return the deposit (if any) of an asset account or a consumer reference (if any) of an
-   * account.
-   *
-   * The origin must be Signed.
-   *
-   * - `id`: The identifier of the asset for which the caller would like the deposit
-   * refunded.
-   * - `allow_burn`: If `true` then assets may be destroyed in order to complete the refund.
-   *
-   * It will fail with either [`Error::ContainsHolds`] or [`Error::ContainsFreezes`] if
-   * the asset account contains holds or freezes in place.
-   *
-   * Emits `Refunded` event when successful.
-   **/
-  | { name: 'Refund'; params: { id: bigint; allowBurn: boolean } }
-  /**
-   * Sets the minimum balance of an asset.
-   *
-   * Only works if there aren't any accounts that are holding the asset or if
-   * the new value of `min_balance` is less than the old one.
-   *
-   * Origin must be Signed and the sender has to be the Owner of the
-   * asset `id`.
-   *
-   * - `id`: The identifier of the asset.
-   * - `min_balance`: The new value of `min_balance`.
-   *
-   * Emits `AssetMinBalanceChanged` event when successful.
-   **/
-  | { name: 'SetMinBalance'; params: { id: bigint; minBalance: bigint } }
-  /**
-   * Create an asset account for `who`.
-   *
-   * A deposit will be taken from the signer account.
-   *
-   * - `origin`: Must be Signed by `Freezer` or `Admin` of the asset `id`; the signer account
-   * must have sufficient funds for a deposit to be taken.
-   * - `id`: The identifier of the asset for the account to be created.
-   * - `who`: The account to be created.
-   *
-   * Emits `Touched` event when successful.
-   **/
-  | { name: 'TouchOther'; params: { id: bigint; who: AccountId20 } }
-  /**
-   * Return the deposit (if any) of a target asset account. Useful if you are the depositor.
-   *
-   * The origin must be Signed and either the account owner, depositor, or asset `Admin`. In
-   * order to burn a non-zero balance of the asset, the caller must be the account and should
-   * use `refund`.
-   *
-   * - `id`: The identifier of the asset for the account holding a deposit.
-   * - `who`: The account to refund.
-   *
-   * It will fail with either [`Error::ContainsHolds`] or [`Error::ContainsFreezes`] if
-   * the asset account contains holds or freezes in place.
-   *
-   * Emits `Refunded` event when successful.
-   **/
-  | { name: 'RefundOther'; params: { id: bigint; who: AccountId20 } }
-  /**
-   * Disallow further unprivileged transfers of an asset `id` to and from an account `who`.
-   *
-   * Origin must be Signed and the sender should be the Freezer of the asset `id`.
-   *
-   * - `id`: The identifier of the account's asset.
-   * - `who`: The account to be unblocked.
-   *
-   * Emits `Blocked`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'Block'; params: { id: bigint; who: AccountId20 } }
-  /**
-   * Transfer the entire transferable balance from the caller asset account.
-   *
-   * NOTE: This function only attempts to transfer _transferable_ balances. This means that
-   * any held, frozen, or minimum balance (when `keep_alive` is `true`), will not be
-   * transferred by this function. To ensure that this function results in a killed account,
-   * you might need to prepare the account by removing any reference counters, storage
-   * deposits, etc...
-   *
-   * The dispatch origin of this call must be Signed.
-   *
-   * - `id`: The identifier of the asset for the account holding a deposit.
-   * - `dest`: The recipient of the transfer.
-   * - `keep_alive`: A boolean to determine if the `transfer_all` operation should send all
-   * of the funds the asset account has, causing the sender asset account to be killed
-   * (false), or transfer everything except at least the minimum balance, which will
-   * guarantee to keep the sender asset account alive (true).
-   **/
-  | { name: 'TransferAll'; params: { id: bigint; dest: AccountId20; keepAlive: boolean } };
-
-export type PalletAssetsCallLike =
-  /**
-   * Issue a new class of fungible assets from a public origin.
-   *
-   * This new asset class has no assets initially and its owner is the origin.
-   *
-   * The origin must conform to the configured `CreateOrigin` and have sufficient funds free.
-   *
-   * Funds of sender are reserved by `AssetDeposit`.
-   *
-   * Parameters:
-   * - `id`: The identifier of the new asset. This must not be currently in use to identify
-   * an existing asset. If [`NextAssetId`] is set, then this must be equal to it.
-   * - `admin`: The admin of this class of assets. The admin is the initial address of each
-   * member of the asset class's admin team.
-   * - `min_balance`: The minimum balance of this new asset that any single account must
-   * have. If an account's balance is reduced below this, then it collapses to zero.
-   *
-   * Emits `Created` event when successful.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'Create'; params: { id: bigint; admin: AccountId20Like; minBalance: bigint } }
-  /**
-   * Issue a new class of fungible assets from a privileged origin.
-   *
-   * This new asset class has no assets initially.
-   *
-   * The origin must conform to `ForceOrigin`.
-   *
-   * Unlike `create`, no funds are reserved.
-   *
-   * - `id`: The identifier of the new asset. This must not be currently in use to identify
-   * an existing asset. If [`NextAssetId`] is set, then this must be equal to it.
-   * - `owner`: The owner of this class of assets. The owner has full superuser permissions
-   * over this asset, but may later change and configure the permissions using
-   * `transfer_ownership` and `set_team`.
-   * - `min_balance`: The minimum balance of this new asset that any single account must
-   * have. If an account's balance is reduced below this, then it collapses to zero.
-   *
-   * Emits `ForceCreated` event when successful.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ForceCreate'; params: { id: bigint; owner: AccountId20Like; isSufficient: boolean; minBalance: bigint } }
-  /**
-   * Start the process of destroying a fungible asset class.
-   *
-   * `start_destroy` is the first in a series of extrinsics that should be called, to allow
-   * destruction of an asset class.
-   *
-   * The origin must conform to `ForceOrigin` or must be `Signed` by the asset's `owner`.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
-   *
-   * It will fail with either [`Error::ContainsHolds`] or [`Error::ContainsFreezes`] if
-   * an account contains holds or freezes in place.
-   **/
-  | { name: 'StartDestroy'; params: { id: bigint } }
-  /**
-   * Destroy all accounts associated with a given asset.
-   *
-   * `destroy_accounts` should only be called after `start_destroy` has been called, and the
-   * asset is in a `Destroying` state.
-   *
-   * Due to weight restrictions, this function may need to be called multiple times to fully
-   * destroy all accounts. It will destroy `RemoveItemsLimit` accounts at a time.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
-   *
-   * Each call emits the `Event::DestroyedAccounts` event.
-   **/
-  | { name: 'DestroyAccounts'; params: { id: bigint } }
-  /**
-   * Destroy all approvals associated with a given asset up to the max (T::RemoveItemsLimit).
-   *
-   * `destroy_approvals` should only be called after `start_destroy` has been called, and the
-   * asset is in a `Destroying` state.
-   *
-   * Due to weight restrictions, this function may need to be called multiple times to fully
-   * destroy all approvals. It will destroy `RemoveItemsLimit` approvals at a time.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
-   *
-   * Each call emits the `Event::DestroyedApprovals` event.
-   **/
-  | { name: 'DestroyApprovals'; params: { id: bigint } }
-  /**
-   * Complete destroying asset and unreserve currency.
-   *
-   * `finish_destroy` should only be called after `start_destroy` has been called, and the
-   * asset is in a `Destroying` state. All accounts or approvals should be destroyed before
-   * hand.
-   *
-   * - `id`: The identifier of the asset to be destroyed. This must identify an existing
-   * asset.
-   *
-   * Each successful call emits the `Event::Destroyed` event.
-   **/
-  | { name: 'FinishDestroy'; params: { id: bigint } }
-  /**
-   * Mint assets of a particular class.
-   *
-   * The origin must be Signed and the sender must be the Issuer of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to have some amount minted.
-   * - `beneficiary`: The account to be credited with the minted assets.
-   * - `amount`: The amount of the asset to be minted.
-   *
-   * Emits `Issued` event when successful.
-   *
-   * Weight: `O(1)`
-   * Modes: Pre-existing balance of `beneficiary`; Account pre-existence of `beneficiary`.
-   **/
-  | { name: 'Mint'; params: { id: bigint; beneficiary: AccountId20Like; amount: bigint } }
-  /**
-   * Reduce the balance of `who` by as much as possible up to `amount` assets of `id`.
-   *
-   * Origin must be Signed and the sender should be the Manager of the asset `id`.
-   *
-   * Bails with `NoAccount` if the `who` is already dead.
-   *
-   * - `id`: The identifier of the asset to have some amount burned.
-   * - `who`: The account to be debited from.
-   * - `amount`: The maximum amount by which `who`'s balance should be reduced.
-   *
-   * Emits `Burned` with the actual amount burned. If this takes the balance to below the
-   * minimum for the asset, then the amount burned is increased to take it to zero.
-   *
-   * Weight: `O(1)`
-   * Modes: Post-existence of `who`; Pre & post Zombie-status of `who`.
-   **/
-  | { name: 'Burn'; params: { id: bigint; who: AccountId20Like; amount: bigint } }
-  /**
-   * Move some assets from the sender account to another.
-   *
-   * Origin must be Signed.
-   *
-   * - `id`: The identifier of the asset to have some amount transferred.
-   * - `target`: The account to be credited.
-   * - `amount`: The amount by which the sender's balance of assets should be reduced and
-   * `target`'s balance increased. The amount actually transferred may be slightly greater in
-   * the case that the transfer would otherwise take the sender balance above zero but below
-   * the minimum balance. Must be greater than zero.
-   *
-   * Emits `Transferred` with the actual amount transferred. If this takes the source balance
-   * to below the minimum for the asset, then the amount transferred is increased to take it
-   * to zero.
-   *
-   * Weight: `O(1)`
-   * Modes: Pre-existence of `target`; Post-existence of sender; Account pre-existence of
-   * `target`.
-   **/
-  | { name: 'Transfer'; params: { id: bigint; target: AccountId20Like; amount: bigint } }
-  /**
-   * Move some assets from the sender account to another, keeping the sender account alive.
-   *
-   * Origin must be Signed.
-   *
-   * - `id`: The identifier of the asset to have some amount transferred.
-   * - `target`: The account to be credited.
-   * - `amount`: The amount by which the sender's balance of assets should be reduced and
-   * `target`'s balance increased. The amount actually transferred may be slightly greater in
-   * the case that the transfer would otherwise take the sender balance above zero but below
-   * the minimum balance. Must be greater than zero.
-   *
-   * Emits `Transferred` with the actual amount transferred. If this takes the source balance
-   * to below the minimum for the asset, then the amount transferred is increased to take it
-   * to zero.
-   *
-   * Weight: `O(1)`
-   * Modes: Pre-existence of `target`; Post-existence of sender; Account pre-existence of
-   * `target`.
-   **/
-  | { name: 'TransferKeepAlive'; params: { id: bigint; target: AccountId20Like; amount: bigint } }
-  /**
-   * Move some assets from one account to another.
-   *
-   * Origin must be Signed and the sender should be the Admin of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to have some amount transferred.
-   * - `source`: The account to be debited.
-   * - `dest`: The account to be credited.
-   * - `amount`: The amount by which the `source`'s balance of assets should be reduced and
-   * `dest`'s balance increased. The amount actually transferred may be slightly greater in
-   * the case that the transfer would otherwise take the `source` balance above zero but
-   * below the minimum balance. Must be greater than zero.
-   *
-   * Emits `Transferred` with the actual amount transferred. If this takes the source balance
-   * to below the minimum for the asset, then the amount transferred is increased to take it
-   * to zero.
-   *
-   * Weight: `O(1)`
-   * Modes: Pre-existence of `dest`; Post-existence of `source`; Account pre-existence of
-   * `dest`.
-   **/
-  | { name: 'ForceTransfer'; params: { id: bigint; source: AccountId20Like; dest: AccountId20Like; amount: bigint } }
-  /**
-   * Disallow further unprivileged transfers of an asset `id` from an account `who`. `who`
-   * must already exist as an entry in `Account`s of the asset. If you want to freeze an
-   * account that does not have an entry, use `touch_other` first.
-   *
-   * Origin must be Signed and the sender should be the Freezer of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   * - `who`: The account to be frozen.
-   *
-   * Emits `Frozen`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'Freeze'; params: { id: bigint; who: AccountId20Like } }
-  /**
-   * Allow unprivileged transfers to and from an account again.
-   *
-   * Origin must be Signed and the sender should be the Admin of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   * - `who`: The account to be unfrozen.
-   *
-   * Emits `Thawed`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'Thaw'; params: { id: bigint; who: AccountId20Like } }
-  /**
-   * Disallow further unprivileged transfers for the asset class.
-   *
-   * Origin must be Signed and the sender should be the Freezer of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   *
-   * Emits `Frozen`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'FreezeAsset'; params: { id: bigint } }
-  /**
-   * Allow unprivileged transfers for the asset again.
-   *
-   * Origin must be Signed and the sender should be the Admin of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be thawed.
-   *
-   * Emits `Thawed`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ThawAsset'; params: { id: bigint } }
-  /**
-   * Change the Owner of an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * - `id`: The identifier of the asset.
-   * - `owner`: The new Owner of this asset.
-   *
-   * Emits `OwnerChanged`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'TransferOwnership'; params: { id: bigint; owner: AccountId20Like } }
-  /**
-   * Change the Issuer, Admin and Freezer of an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * - `id`: The identifier of the asset to be frozen.
-   * - `issuer`: The new Issuer of this asset.
-   * - `admin`: The new Admin of this asset.
-   * - `freezer`: The new Freezer of this asset.
-   *
-   * Emits `TeamChanged`.
-   *
-   * Weight: `O(1)`
-   **/
-  | {
-      name: 'SetTeam';
-      params: { id: bigint; issuer: AccountId20Like; admin: AccountId20Like; freezer: AccountId20Like };
-    }
-  /**
-   * Set the metadata for an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * Funds of sender are reserved according to the formula:
-   * `MetadataDepositBase + MetadataDepositPerByte * (name.len + symbol.len)` taking into
-   * account any already reserved funds.
-   *
-   * - `id`: The identifier of the asset to update.
-   * - `name`: The user friendly name of this asset. Limited in length by `StringLimit`.
-   * - `symbol`: The exchange symbol for this asset. Limited in length by `StringLimit`.
-   * - `decimals`: The number of decimals this asset uses to represent one unit.
-   *
-   * Emits `MetadataSet`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'SetMetadata'; params: { id: bigint; name: BytesLike; symbol: BytesLike; decimals: number } }
-  /**
-   * Clear the metadata for an asset.
-   *
-   * Origin must be Signed and the sender should be the Owner of the asset `id`.
-   *
-   * Any deposit is freed for the asset owner.
-   *
-   * - `id`: The identifier of the asset to clear.
-   *
-   * Emits `MetadataCleared`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ClearMetadata'; params: { id: bigint } }
-  /**
-   * Force the metadata for an asset to some value.
-   *
-   * Origin must be ForceOrigin.
-   *
-   * Any deposit is left alone.
-   *
-   * - `id`: The identifier of the asset to update.
-   * - `name`: The user friendly name of this asset. Limited in length by `StringLimit`.
-   * - `symbol`: The exchange symbol for this asset. Limited in length by `StringLimit`.
-   * - `decimals`: The number of decimals this asset uses to represent one unit.
-   *
-   * Emits `MetadataSet`.
-   *
-   * Weight: `O(N + S)` where N and S are the length of the name and symbol respectively.
-   **/
-  | {
-      name: 'ForceSetMetadata';
-      params: { id: bigint; name: BytesLike; symbol: BytesLike; decimals: number; isFrozen: boolean };
-    }
-  /**
-   * Clear the metadata for an asset.
-   *
-   * Origin must be ForceOrigin.
-   *
-   * Any deposit is returned.
-   *
-   * - `id`: The identifier of the asset to clear.
-   *
-   * Emits `MetadataCleared`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ForceClearMetadata'; params: { id: bigint } }
-  /**
-   * Alter the attributes of a given asset.
-   *
-   * Origin must be `ForceOrigin`.
-   *
-   * - `id`: The identifier of the asset.
-   * - `owner`: The new Owner of this asset.
-   * - `issuer`: The new Issuer of this asset.
-   * - `admin`: The new Admin of this asset.
-   * - `freezer`: The new Freezer of this asset.
-   * - `min_balance`: The minimum balance of this new asset that any single account must
-   * have. If an account's balance is reduced below this, then it collapses to zero.
-   * - `is_sufficient`: Whether a non-zero balance of this asset is deposit of sufficient
-   * value to account for the state bloat associated with its balance storage. If set to
-   * `true`, then non-zero balances may be stored without a `consumer` reference (and thus
-   * an ED in the Balances pallet or whatever else is used to control user-account state
-   * growth).
-   * - `is_frozen`: Whether this asset class is frozen except for permissioned/admin
-   * instructions.
-   *
-   * Emits `AssetStatusChanged` with the identity of the asset.
-   *
-   * Weight: `O(1)`
-   **/
-  | {
-      name: 'ForceAssetStatus';
-      params: {
-        id: bigint;
-        owner: AccountId20Like;
-        issuer: AccountId20Like;
-        admin: AccountId20Like;
-        freezer: AccountId20Like;
-        minBalance: bigint;
-        isSufficient: boolean;
-        isFrozen: boolean;
-      };
-    }
-  /**
-   * Approve an amount of asset for transfer by a delegated third-party account.
-   *
-   * Origin must be Signed.
-   *
-   * Ensures that `ApprovalDeposit` worth of `Currency` is reserved from signing account
-   * for the purpose of holding the approval. If some non-zero amount of assets is already
-   * approved from signing account to `delegate`, then it is topped up or unreserved to
-   * meet the right value.
-   *
-   * NOTE: The signing account does not need to own `amount` of assets at the point of
-   * making this call.
-   *
-   * - `id`: The identifier of the asset.
-   * - `delegate`: The account to delegate permission to transfer asset.
-   * - `amount`: The amount of asset that may be transferred by `delegate`. If there is
-   * already an approval in place, then this acts additively.
-   *
-   * Emits `ApprovedTransfer` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ApproveTransfer'; params: { id: bigint; delegate: AccountId20Like; amount: bigint } }
-  /**
-   * Cancel all of some asset approved for delegated transfer by a third-party account.
-   *
-   * Origin must be Signed and there must be an approval in place between signer and
-   * `delegate`.
-   *
-   * Unreserves any deposit previously reserved by `approve_transfer` for the approval.
-   *
-   * - `id`: The identifier of the asset.
-   * - `delegate`: The account delegated permission to transfer asset.
-   *
-   * Emits `ApprovalCancelled` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'CancelApproval'; params: { id: bigint; delegate: AccountId20Like } }
-  /**
-   * Cancel all of some asset approved for delegated transfer by a third-party account.
-   *
-   * Origin must be either ForceOrigin or Signed origin with the signer being the Admin
-   * account of the asset `id`.
-   *
-   * Unreserves any deposit previously reserved by `approve_transfer` for the approval.
-   *
-   * - `id`: The identifier of the asset.
-   * - `delegate`: The account delegated permission to transfer asset.
-   *
-   * Emits `ApprovalCancelled` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'ForceCancelApproval'; params: { id: bigint; owner: AccountId20Like; delegate: AccountId20Like } }
-  /**
-   * Transfer some asset balance from a previously delegated account to some third-party
-   * account.
-   *
-   * Origin must be Signed and there must be an approval in place by the `owner` to the
-   * signer.
-   *
-   * If the entire amount approved for transfer is transferred, then any deposit previously
-   * reserved by `approve_transfer` is unreserved.
-   *
-   * - `id`: The identifier of the asset.
-   * - `owner`: The account which previously approved for a transfer of at least `amount` and
-   * from which the asset balance will be withdrawn.
-   * - `destination`: The account to which the asset balance of `amount` will be transferred.
-   * - `amount`: The amount of assets to transfer.
-   *
-   * Emits `TransferredApproved` on success.
-   *
-   * Weight: `O(1)`
-   **/
-  | {
-      name: 'TransferApproved';
-      params: { id: bigint; owner: AccountId20Like; destination: AccountId20Like; amount: bigint };
-    }
-  /**
-   * Create an asset account for non-provider assets.
-   *
-   * A deposit will be taken from the signer account.
-   *
-   * - `origin`: Must be Signed; the signer account must have sufficient funds for a deposit
-   * to be taken.
-   * - `id`: The identifier of the asset for the account to be created.
-   *
-   * Emits `Touched` event when successful.
-   **/
-  | { name: 'Touch'; params: { id: bigint } }
-  /**
-   * Return the deposit (if any) of an asset account or a consumer reference (if any) of an
-   * account.
-   *
-   * The origin must be Signed.
-   *
-   * - `id`: The identifier of the asset for which the caller would like the deposit
-   * refunded.
-   * - `allow_burn`: If `true` then assets may be destroyed in order to complete the refund.
-   *
-   * It will fail with either [`Error::ContainsHolds`] or [`Error::ContainsFreezes`] if
-   * the asset account contains holds or freezes in place.
-   *
-   * Emits `Refunded` event when successful.
-   **/
-  | { name: 'Refund'; params: { id: bigint; allowBurn: boolean } }
-  /**
-   * Sets the minimum balance of an asset.
-   *
-   * Only works if there aren't any accounts that are holding the asset or if
-   * the new value of `min_balance` is less than the old one.
-   *
-   * Origin must be Signed and the sender has to be the Owner of the
-   * asset `id`.
-   *
-   * - `id`: The identifier of the asset.
-   * - `min_balance`: The new value of `min_balance`.
-   *
-   * Emits `AssetMinBalanceChanged` event when successful.
-   **/
-  | { name: 'SetMinBalance'; params: { id: bigint; minBalance: bigint } }
-  /**
-   * Create an asset account for `who`.
-   *
-   * A deposit will be taken from the signer account.
-   *
-   * - `origin`: Must be Signed by `Freezer` or `Admin` of the asset `id`; the signer account
-   * must have sufficient funds for a deposit to be taken.
-   * - `id`: The identifier of the asset for the account to be created.
-   * - `who`: The account to be created.
-   *
-   * Emits `Touched` event when successful.
-   **/
-  | { name: 'TouchOther'; params: { id: bigint; who: AccountId20Like } }
-  /**
-   * Return the deposit (if any) of a target asset account. Useful if you are the depositor.
-   *
-   * The origin must be Signed and either the account owner, depositor, or asset `Admin`. In
-   * order to burn a non-zero balance of the asset, the caller must be the account and should
-   * use `refund`.
-   *
-   * - `id`: The identifier of the asset for the account holding a deposit.
-   * - `who`: The account to refund.
-   *
-   * It will fail with either [`Error::ContainsHolds`] or [`Error::ContainsFreezes`] if
-   * the asset account contains holds or freezes in place.
-   *
-   * Emits `Refunded` event when successful.
-   **/
-  | { name: 'RefundOther'; params: { id: bigint; who: AccountId20Like } }
-  /**
-   * Disallow further unprivileged transfers of an asset `id` to and from an account `who`.
-   *
-   * Origin must be Signed and the sender should be the Freezer of the asset `id`.
-   *
-   * - `id`: The identifier of the account's asset.
-   * - `who`: The account to be unblocked.
-   *
-   * Emits `Blocked`.
-   *
-   * Weight: `O(1)`
-   **/
-  | { name: 'Block'; params: { id: bigint; who: AccountId20Like } }
-  /**
-   * Transfer the entire transferable balance from the caller asset account.
-   *
-   * NOTE: This function only attempts to transfer _transferable_ balances. This means that
-   * any held, frozen, or minimum balance (when `keep_alive` is `true`), will not be
-   * transferred by this function. To ensure that this function results in a killed account,
-   * you might need to prepare the account by removing any reference counters, storage
-   * deposits, etc...
-   *
-   * The dispatch origin of this call must be Signed.
-   *
-   * - `id`: The identifier of the asset for the account holding a deposit.
-   * - `dest`: The recipient of the transfer.
-   * - `keep_alive`: A boolean to determine if the `transfer_all` operation should send all
-   * of the funds the asset account has, causing the sender asset account to be killed
-   * (false), or transfer everything except at least the minimum balance, which will
-   * guarantee to keep the sender asset account alive (true).
-   **/
-  | { name: 'TransferAll'; params: { id: bigint; dest: AccountId20Like; keepAlive: boolean } };
-
-/**
- * Contains a variant per dispatchable extrinsic that this pallet has.
- **/
-export type PalletXcmTransactorCall =
-  /**
-   * Register a derivative index for an account id. Dispatchable by
-   * DerivativeAddressRegistrationOrigin
-   *
-   * We do not store the derivative address, but only the index. We do not need to store
-   * the derivative address to issue calls, only the index is enough
-   *
-   * For now an index is registered for all possible destinations and not per-destination.
-   * We can change this in the future although it would just make things more complicated
-   **/
-  | { name: 'Register'; params: { who: AccountId20; index: number } }
-  /**
-   * De-Register a derivative index. This prevents an account to use a derivative address
-   * (represented by an index) from our of our sovereign accounts anymore
-   **/
-  | { name: 'Deregister'; params: { index: number } }
-  /**
-   * Transact the inner call through a derivative account in a destination chain,
-   * using 'fee_location' to pay for the fees. This fee_location is given as a multilocation
-   *
-   * The caller needs to have the index registered in this pallet. The fee multiasset needs
-   * to be a reserve asset for the destination transactor::multilocation.
-   **/
-  | {
-      name: 'TransactThroughDerivative';
-      params: {
-        dest: MoonbeamRuntimeXcmConfigTransactors;
-        index: number;
-        fee: PalletXcmTransactorCurrencyPayment;
-        innerCall: Bytes;
-        weightInfo: PalletXcmTransactorTransactWeights;
-        refund: boolean;
-      };
-    }
-  /**
-   * Transact the call through the sovereign account in a destination chain,
-   * 'fee_payer' pays for the fee
-   *
-   * SovereignAccountDispatcherOrigin callable only
-   **/
-  | {
-      name: 'TransactThroughSovereign';
-      params: {
-        dest: XcmVersionedLocation;
-        feePayer?: AccountId20 | undefined;
-        fee: PalletXcmTransactorCurrencyPayment;
-        call: Bytes;
-        originKind: XcmV3OriginKind;
-        weightInfo: PalletXcmTransactorTransactWeights;
-        refund: boolean;
-      };
-    }
-  /**
-   * Change the transact info of a location
-   **/
-  | {
-      name: 'SetTransactInfo';
-      params: {
-        location: XcmVersionedLocation;
-        transactExtraWeight: SpWeightsWeightV2Weight;
-        maxWeight: SpWeightsWeightV2Weight;
-        transactExtraWeightSigned?: SpWeightsWeightV2Weight | undefined;
-      };
-    }
-  /**
-   * Remove the transact info of a location
-   **/
-  | { name: 'RemoveTransactInfo'; params: { location: XcmVersionedLocation } }
-  /**
-   * Transact the call through the a signed origin in this chain
-   * that should be converted to a transaction dispatch account in the destination chain
-   * by any method implemented in the destination chains runtime
-   *
-   * This time we are giving the currency as a currencyId instead of multilocation
-   **/
-  | {
-      name: 'TransactThroughSigned';
-      params: {
-        dest: XcmVersionedLocation;
-        fee: PalletXcmTransactorCurrencyPayment;
-        call: Bytes;
-        weightInfo: PalletXcmTransactorTransactWeights;
-        refund: boolean;
-      };
-    }
-  /**
-   * Set the fee per second of an asset on its reserve chain
-   **/
-  | { name: 'SetFeePerSecond'; params: { assetLocation: XcmVersionedLocation; feePerSecond: bigint } }
-  /**
-   * Remove the fee per second of an asset on its reserve chain
-   **/
-  | { name: 'RemoveFeePerSecond'; params: { assetLocation: XcmVersionedLocation } }
-  /**
-   * Manage HRMP operations
-   **/
-  | {
-      name: 'HrmpManage';
-      params: {
-        action: PalletXcmTransactorHrmpOperation;
-        fee: PalletXcmTransactorCurrencyPayment;
-        weightInfo: PalletXcmTransactorTransactWeights;
-      };
-    };
-
-export type PalletXcmTransactorCallLike =
-  /**
-   * Register a derivative index for an account id. Dispatchable by
-   * DerivativeAddressRegistrationOrigin
-   *
-   * We do not store the derivative address, but only the index. We do not need to store
-   * the derivative address to issue calls, only the index is enough
-   *
-   * For now an index is registered for all possible destinations and not per-destination.
-   * We can change this in the future although it would just make things more complicated
-   **/
-  | { name: 'Register'; params: { who: AccountId20Like; index: number } }
-  /**
-   * De-Register a derivative index. This prevents an account to use a derivative address
-   * (represented by an index) from our of our sovereign accounts anymore
-   **/
-  | { name: 'Deregister'; params: { index: number } }
-  /**
-   * Transact the inner call through a derivative account in a destination chain,
-   * using 'fee_location' to pay for the fees. This fee_location is given as a multilocation
-   *
-   * The caller needs to have the index registered in this pallet. The fee multiasset needs
-   * to be a reserve asset for the destination transactor::multilocation.
-   **/
-  | {
-      name: 'TransactThroughDerivative';
-      params: {
-        dest: MoonbeamRuntimeXcmConfigTransactors;
-        index: number;
-        fee: PalletXcmTransactorCurrencyPayment;
-        innerCall: BytesLike;
-        weightInfo: PalletXcmTransactorTransactWeights;
-        refund: boolean;
-      };
-    }
-  /**
-   * Transact the call through the sovereign account in a destination chain,
-   * 'fee_payer' pays for the fee
-   *
-   * SovereignAccountDispatcherOrigin callable only
-   **/
-  | {
-      name: 'TransactThroughSovereign';
-      params: {
-        dest: XcmVersionedLocation;
-        feePayer?: AccountId20Like | undefined;
-        fee: PalletXcmTransactorCurrencyPayment;
-        call: BytesLike;
-        originKind: XcmV3OriginKind;
-        weightInfo: PalletXcmTransactorTransactWeights;
-        refund: boolean;
-      };
-    }
-  /**
-   * Change the transact info of a location
-   **/
-  | {
-      name: 'SetTransactInfo';
-      params: {
-        location: XcmVersionedLocation;
-        transactExtraWeight: SpWeightsWeightV2Weight;
-        maxWeight: SpWeightsWeightV2Weight;
-        transactExtraWeightSigned?: SpWeightsWeightV2Weight | undefined;
-      };
-    }
-  /**
-   * Remove the transact info of a location
-   **/
-  | { name: 'RemoveTransactInfo'; params: { location: XcmVersionedLocation } }
-  /**
-   * Transact the call through the a signed origin in this chain
-   * that should be converted to a transaction dispatch account in the destination chain
-   * by any method implemented in the destination chains runtime
-   *
-   * This time we are giving the currency as a currencyId instead of multilocation
-   **/
-  | {
-      name: 'TransactThroughSigned';
-      params: {
-        dest: XcmVersionedLocation;
-        fee: PalletXcmTransactorCurrencyPayment;
-        call: BytesLike;
-        weightInfo: PalletXcmTransactorTransactWeights;
-        refund: boolean;
-      };
-    }
-  /**
-   * Set the fee per second of an asset on its reserve chain
-   **/
-  | { name: 'SetFeePerSecond'; params: { assetLocation: XcmVersionedLocation; feePerSecond: bigint } }
-  /**
-   * Remove the fee per second of an asset on its reserve chain
-   **/
-  | { name: 'RemoveFeePerSecond'; params: { assetLocation: XcmVersionedLocation } }
-  /**
-   * Manage HRMP operations
+   * Manage HRMP operations
    **/
   | {
       name: 'HrmpManage';
@@ -9897,119 +8765,6 @@ export type XcmV3TraitsSendError =
   | 'MissingArgument'
   | 'Fees';
 
-/**
- * The `Event` enum of this pallet
- **/
-export type PalletAssetsEvent =
-  /**
-   * Some asset class was created.
-   **/
-  | { name: 'Created'; data: { assetId: bigint; creator: AccountId20; owner: AccountId20 } }
-  /**
-   * Some assets were issued.
-   **/
-  | { name: 'Issued'; data: { assetId: bigint; owner: AccountId20; amount: bigint } }
-  /**
-   * Some assets were transferred.
-   **/
-  | { name: 'Transferred'; data: { assetId: bigint; from: AccountId20; to: AccountId20; amount: bigint } }
-  /**
-   * Some assets were destroyed.
-   **/
-  | { name: 'Burned'; data: { assetId: bigint; owner: AccountId20; balance: bigint } }
-  /**
-   * The management team changed.
-   **/
-  | { name: 'TeamChanged'; data: { assetId: bigint; issuer: AccountId20; admin: AccountId20; freezer: AccountId20 } }
-  /**
-   * The owner changed.
-   **/
-  | { name: 'OwnerChanged'; data: { assetId: bigint; owner: AccountId20 } }
-  /**
-   * Some account `who` was frozen.
-   **/
-  | { name: 'Frozen'; data: { assetId: bigint; who: AccountId20 } }
-  /**
-   * Some account `who` was thawed.
-   **/
-  | { name: 'Thawed'; data: { assetId: bigint; who: AccountId20 } }
-  /**
-   * Some asset `asset_id` was frozen.
-   **/
-  | { name: 'AssetFrozen'; data: { assetId: bigint } }
-  /**
-   * Some asset `asset_id` was thawed.
-   **/
-  | { name: 'AssetThawed'; data: { assetId: bigint } }
-  /**
-   * Accounts were destroyed for given asset.
-   **/
-  | { name: 'AccountsDestroyed'; data: { assetId: bigint; accountsDestroyed: number; accountsRemaining: number } }
-  /**
-   * Approvals were destroyed for given asset.
-   **/
-  | { name: 'ApprovalsDestroyed'; data: { assetId: bigint; approvalsDestroyed: number; approvalsRemaining: number } }
-  /**
-   * An asset class is in the process of being destroyed.
-   **/
-  | { name: 'DestructionStarted'; data: { assetId: bigint } }
-  /**
-   * An asset class was destroyed.
-   **/
-  | { name: 'Destroyed'; data: { assetId: bigint } }
-  /**
-   * Some asset class was force-created.
-   **/
-  | { name: 'ForceCreated'; data: { assetId: bigint; owner: AccountId20 } }
-  /**
-   * New metadata has been set for an asset.
-   **/
-  | { name: 'MetadataSet'; data: { assetId: bigint; name: Bytes; symbol: Bytes; decimals: number; isFrozen: boolean } }
-  /**
-   * Metadata has been cleared for an asset.
-   **/
-  | { name: 'MetadataCleared'; data: { assetId: bigint } }
-  /**
-   * (Additional) funds have been approved for transfer to a destination account.
-   **/
-  | { name: 'ApprovedTransfer'; data: { assetId: bigint; source: AccountId20; delegate: AccountId20; amount: bigint } }
-  /**
-   * An approval for account `delegate` was cancelled by `owner`.
-   **/
-  | { name: 'ApprovalCancelled'; data: { assetId: bigint; owner: AccountId20; delegate: AccountId20 } }
-  /**
-   * An `amount` was transferred in its entirety from `owner` to `destination` by
-   * the approved `delegate`.
-   **/
-  | {
-      name: 'TransferredApproved';
-      data: { assetId: bigint; owner: AccountId20; delegate: AccountId20; destination: AccountId20; amount: bigint };
-    }
-  /**
-   * An asset has had its attributes changed by the `Force` origin.
-   **/
-  | { name: 'AssetStatusChanged'; data: { assetId: bigint } }
-  /**
-   * The min_balance of an asset has been updated by the asset owner.
-   **/
-  | { name: 'AssetMinBalanceChanged'; data: { assetId: bigint; newMinBalance: bigint } }
-  /**
-   * Some account `who` was created with a deposit from `depositor`.
-   **/
-  | { name: 'Touched'; data: { assetId: bigint; who: AccountId20; depositor: AccountId20 } }
-  /**
-   * Some account `who` was blocked.
-   **/
-  | { name: 'Blocked'; data: { assetId: bigint; who: AccountId20 } }
-  /**
-   * Some assets were deposited (e.g. for transaction fees).
-   **/
-  | { name: 'Deposited'; data: { assetId: bigint; who: AccountId20; amount: bigint } }
-  /**
-   * Some assets were withdrawn from the account (e.g. for transaction fees).
-   **/
-  | { name: 'Withdrawn'; data: { assetId: bigint; who: AccountId20; amount: bigint } };
-
 /**
  * The `Event` enum of this pallet
  **/
@@ -10897,7 +9652,17 @@ export type PalletPreimageHoldReason = 'Preimage';
 
 export type PalletXcmBridgeHubHoldReason = 'BridgeDeposit';
 
-export type FrameSupportTokensMiscIdAmount002 = { id: []; amount: bigint };
+export type FrameSupportTokensMiscIdAmountRuntimeFreezeReason = {
+  id: MoonbeamRuntimeRuntimeFreezeReason;
+  amount: bigint;
+};
+
+export type MoonbeamRuntimeRuntimeFreezeReason = {
+  type: 'ParachainStaking';
+  value: PalletParachainStakingFreezeReason;
+};
+
+export type PalletParachainStakingFreezeReason = 'StakingCollator' | 'StakingDelegator';
 
 /**
  * The `Error` enum of this pallet.
@@ -11082,7 +9847,8 @@ export type PalletParachainStakingError =
   | 'CandidateLimitReached'
   | 'CannotSetAboveMaxCandidates'
   | 'MarkingOfflineNotEnabled'
-  | 'CurrentRoundTooLow';
+  | 'CurrentRoundTooLow'
+  | 'EmptyMigrationBatch';
 
 /**
  * The `Error` enum of this pallet.
@@ -12315,149 +11081,6 @@ export type PalletXcmError =
    **/
   | 'AliasNotFound';
 
-export type PalletAssetsAssetDetails = {
-  owner: AccountId20;
-  issuer: AccountId20;
-  admin: AccountId20;
-  freezer: AccountId20;
-  supply: bigint;
-  deposit: bigint;
-  minBalance: bigint;
-  isSufficient: boolean;
-  accounts: number;
-  sufficients: number;
-  approvals: number;
-  status: PalletAssetsAssetStatus;
-};
-
-export type PalletAssetsAssetStatus = 'Live' | 'Frozen' | 'Destroying';
-
-export type PalletAssetsAssetAccount = {
-  balance: bigint;
-  status: PalletAssetsAccountStatus;
-  reason: PalletAssetsExistenceReason;
-  extra: [];
-};
-
-export type PalletAssetsAccountStatus = 'Liquid' | 'Frozen' | 'Blocked';
-
-export type PalletAssetsExistenceReason =
-  | { type: 'Consumer' }
-  | { type: 'Sufficient' }
-  | { type: 'DepositHeld'; value: bigint }
-  | { type: 'DepositRefunded' }
-  | { type: 'DepositFrom'; value: [AccountId20, bigint] };
-
-export type PalletAssetsApproval = { amount: bigint; deposit: bigint };
-
-export type PalletAssetsAssetMetadata = {
-  deposit: bigint;
-  name: Bytes;
-  symbol: Bytes;
-  decimals: number;
-  isFrozen: boolean;
-};
-
-/**
- * The `Error` enum of this pallet.
- **/
-export type PalletAssetsError =
-  /**
-   * Account balance must be greater than or equal to the transfer amount.
-   **/
-  | 'BalanceLow'
-  /**
-   * The account to alter does not exist.
-   **/
-  | 'NoAccount'
-  /**
-   * The signing account has no permission to do the operation.
-   **/
-  | 'NoPermission'
-  /**
-   * The given asset ID is unknown.
-   **/
-  | 'Unknown'
-  /**
-   * The origin account is frozen.
-   **/
-  | 'Frozen'
-  /**
-   * The asset ID is already taken.
-   **/
-  | 'InUse'
-  /**
-   * Invalid witness data given.
-   **/
-  | 'BadWitness'
-  /**
-   * Minimum balance should be non-zero.
-   **/
-  | 'MinBalanceZero'
-  /**
-   * Unable to increment the consumer reference counters on the account. Either no provider
-   * reference exists to allow a non-zero balance of a non-self-sufficient asset, or one
-   * fewer then the maximum number of consumers has been reached.
-   **/
-  | 'UnavailableConsumer'
-  /**
-   * Invalid metadata given.
-   **/
-  | 'BadMetadata'
-  /**
-   * No approval exists that would allow the transfer.
-   **/
-  | 'Unapproved'
-  /**
-   * The source account would not survive the transfer and it needs to stay alive.
-   **/
-  | 'WouldDie'
-  /**
-   * The asset-account already exists.
-   **/
-  | 'AlreadyExists'
-  /**
-   * The asset-account doesn't have an associated deposit.
-   **/
-  | 'NoDeposit'
-  /**
-   * The operation would result in funds being burned.
-   **/
-  | 'WouldBurn'
-  /**
-   * The asset is a live asset and is actively being used. Usually emit for operations such
-   * as `start_destroy` which require the asset to be in a destroying state.
-   **/
-  | 'LiveAsset'
-  /**
-   * The asset is not live, and likely being destroyed.
-   **/
-  | 'AssetNotLive'
-  /**
-   * The asset status is not the expected status.
-   **/
-  | 'IncorrectStatus'
-  /**
-   * The asset should be frozen before the given operation.
-   **/
-  | 'NotFrozen'
-  /**
-   * Callback action resulted in error
-   **/
-  | 'CallbackFailed'
-  /**
-   * The asset ID must be equal to the [`NextAssetId`].
-   **/
-  | 'BadAssetId'
-  /**
-   * The asset cannot be destroyed because some accounts for this asset contain freezes.
-   **/
-  | 'ContainsFreezes'
-  /**
-   * The asset cannot be destroyed because some accounts for this asset contain holds.
-   **/
-  | 'ContainsHolds';
-
 export type PalletXcmTransactorRelayIndicesRelayChainIndices = {
   staking: number;
   utility: number;
@@ -13178,7 +11801,6 @@ export type MoonbeamRuntimeRuntimeError =
   | { pallet: 'CrowdloanRewards'; palletError: PalletCrowdloanRewardsError }
   | { pallet: 'XcmpQueue'; palletError: CumulusPalletXcmpQueueError }
   | { pallet: 'PolkadotXcm'; palletError: PalletXcmError }
-  | { pallet: 'Assets'; palletError: PalletAssetsError }
   | { pallet: 'XcmTransactor'; palletError: PalletXcmTransactorError }
   | { pallet: 'EthereumXcm'; palletError: PalletEthereumXcmError }
   | { pallet: 'MessageQueue'; palletError: PalletMessageQueueError }