@ddd-ts-kit/redis 0.0.0-stage → 0.1.1

package/README.md

@@ -1,3 +1,700 @@
-# Temporary Holding Version
+# @ddd-ts-kit/redis
 
-This version is a temporary placeholder for this package. An operational version to replace this has been submitted for review and is awaiting a staged release.
+Adapters of kernel ports on the Redis protocol: the `Cache`, `Lock` and `RateLimiter` ports,
+the wake-up signal of the outbox relay, and an integration event provider on Redis Streams.
+They use a common subset of the protocol, so the same code runs on Redis, Dragonfly and
+Valkey: the choice of server is an operational one, made in the composition root by a
+connection URL.
+
+```
+npm i @ddd-ts-kit/redis ioredis
+```
+
+| Entry | Holds | Imports |
+|---|---|---|
+| `@ddd-ts-kit/redis` | `connectRedis`, `redisHealth`, `RedisCache`, `RedisLock`, `RedisRateLimiter`, `RedisRelaySignal`, `relayWakeUpMiddleware`; re-exported from the kernel: the `Lock` and `RateLimiter` ports, `InMemoryLock`, `InMemoryRateLimiter` | the kernel, `ioredis` (peer) |
+| `@ddd-ts-kit/redis/event-bus` | `RedisStreamsEventBus`, its options, topology and error types, the names of the entry fields | the kernel, `ioredis` (peer) |
+| `@ddd-ts-kit/redis/testing` | `cacheContract`, `lockContract`, `rateLimiterContract`, re-exported from `@ddd-ts-kit/testing/contracts` | `@ddd-ts-kit/testing` (optional peer), the runner you pass |
+
+Nothing here is imported from `domain/` or `application/`. A use case depends on the port
+(`Cache`, `Lock`, `RateLimiter` of the kernel); the adapter is chosen in `platform/` and bound
+in the composition root.
+
+With the CLI, `init --cache redis` writes `platform/redis/open-redis.ts` (one connection, the
+cache, the lock, the rate limiter, the relay signal, the readiness probe) and
+`init --broker redis` writes `platform/events/create-event-provider.ts` around
+`RedisStreamsEventBus`. What follows is each piece, wired by hand.
+
+## Connection
+
+```ts
+// src/platform/redis/redis.ts
+import { connectRedis, redisHealth } from '@ddd-ts-kit/redis';
+
+export const redis = connectRedis(config.redisUrl);          // or ioredis options, or a client you already have
+
+export const ready = () => redisHealth(redis.client);        // { status: 'up', latencyMs } | { status: 'down', reason }
+export const shutdown = () => redis.close();
+```
+
+- `connectRedis(url | options | client)` answers `{ client, close() }`. A connection it opened
+  is closed by `close()`; a client it was handed is used as it is and left open, since its
+  owner closes it.
+- A connection opened here adds two settings to the defaults of ioredis (`FAIL_FAST`), which
+  your options override: `commandTimeout: 2000` and `maxRetriesPerRequest: 1`. With the plain
+  defaults, a command sent while the server is away waits for twenty reconnections before
+  failing, and every request of the application waits with it.
+- `redisHealth(client, { timeoutMs? })` sends one `PING`, never throws, and answers within the
+  timeout: use it in a readiness probe. A cache being down is rarely a reason to stop
+  receiving traffic; a lock or a rate limiter being down may be.
+- Every adapter takes the ioredis client, so several share one connection. The relay signal
+  opens a second one, to listen, and the event bus one per consumer name, to block on its
+  reads.
+
+Local development, with Dragonfly:
+
+```yaml
+# compose.yaml
+services:
+  dragonfly:
+    image: docker.dragonflydb.io/dragonflydb/dragonfly:v2.0.2
+    ulimits:
+      memlock: -1
+    command: ['--maxmemory=512mb', '--proactor_threads=2']
+    ports:
+      - '127.0.0.1:6379:6379'
+    volumes:
+      - dragonfly:/data
+volumes:
+  dragonfly:
+```
+
+`REDIS_URL=redis://127.0.0.1:6379` then suits the three servers alike.
+
+**Credentials.** A client of ioredis keeps its options, password included, and shows them to
+whoever inspects it: that cannot be changed from here, so never log a client. The adapters of
+this package (`RedisCache`, `RedisLock`, `RedisRateLimiter`, `RedisRelaySignal`,
+`RedisStreamsEventBus`) hold their client in a field that is not enumerable, and answer their
+name to `JSON.stringify` and `util.inspect`: logging, spreading or serialising an adapter does
+not lead to the client. The object `connectRedis` answers gives its `client` by name
+(`redis.client`, `const { client } = redis`) and leaves it out of a spread or a log.
+
+## Cache
+
+`RedisCache` implements the kernel `Cache` port with its typed `CacheKey`.
+
+```ts
+// src/main.ts
+import { Cache, Lock, Metrics, RateLimiter } from '@ddd-ts-kit/kernel';
+import { contextModule, createApplication, defineContextModule, kernelModule } from '@ddd-ts-kit/di';
+import { RedisCache, RedisLock, RedisRateLimiter } from '@ddd-ts-kit/redis';
+
+const platformModule = defineContextModule({
+  name: 'platform',
+  register(builder) {
+    builder.rebind(Cache).toFactory((resolve) => new RedisCache(redis.client, { namespace: 'app', metrics: resolve(Metrics) }));
+    builder.rebind(Lock).toValue(new RedisLock(redis.client, { namespace: 'app' }));
+    builder.rebind(RateLimiter).toValue(new RedisRateLimiter(redis.client, { namespace: 'app' }));
+  },
+});
+
+const app = createApplication({ modules: [kernelModule(), platformModule, contextModule('catalog', catalogDeclarations)] });
+```
+
+A port of the kernel is an abstract class, and the class is what a binding is keyed by: the
+three adapters `implements` theirs, and a use case that names `Cache`, `Lock` or `RateLimiter`
+in its dependencies receives them. `kernelModule({ cache: (resolve) => new RedisCache(...), lock: ..., rateLimiter: ... })`
+does the same through its options. `cached` of `@ddd-ts-kit/aspects` and everything that
+resolves `Cache` then use it without knowing. A context that wants its keys apart builds its
+own instance with its own `namespace`.
+
+| Option | Default | Effect |
+|---|---|---|
+| `namespace` | none | every key is `<namespace>:<name>`: one per bounded context, or per application sharing a server |
+| `codec` | `jsonCodec` | how a value becomes text and back. With JSON, a `Date` comes back as a string and a class instance as a plain object: cache data, not objects |
+| `onError` | `miss` | a failing server costs a miss on read and a dropped write, never an exception. `throw` lets the failure through |
+| `metrics` | none | counts failures as `cache_errors_total`, labels `operation` (`get`, `set`, `delete`) and `context` (the namespace) |
+| `lock` | none | a `Lock` that `getOrLoad` uses across processes |
+
+- `set(key, value, { ttlMs })` stores with `PX`, in milliseconds. Without `ttlMs` the entry
+  stays until deleted or evicted by the server; `ttlMs: 0` or less deletes it.
+- `deleteByPrefix('price:')` deletes every entry of the namespace whose name starts with the
+  prefix and answers how many. It walks the keys with `SCAN` (200 at a time), never `KEYS`,
+  and reads the prefix literally (`*`, `?`, `[` are escaped). It is not atomic: an entry
+  written during the walk may survive. It is an administrative tool, not something to call per
+  request; prefer short time to live values to invalidation.
+- An entry that cannot be decoded is a miss and is counted.
+
+**A cache must not take the application down.** With the default `onError: 'miss'`, a server
+that is away, slow beyond the command timeout or answering errors makes the application run
+as if it had no cache. Watch `cache_errors_total`: a cache that silently stopped working is a
+latency incident waiting for load.
+
+### Stampede protection
+
+When a popular entry expires, every request that misses it computes it again at the same time.
+
+- Inside one process, `cached` of `@ddd-ts-kit/aspects` already shares one underlying call
+  among concurrent identical calls (single flight). Give it a `RedisCache` and that part is done.
+- Across processes, use `getOrLoad` with a `lock`:
+
+```ts
+const cache = new RedisCache(redis.client, { namespace: 'catalog', lock: new RedisLock(redis.client, { namespace: 'catalog' }) });
+
+const quote = await cache.getOrLoad(quoteKey(pair), () => rates.quoteOf(pair), { ttlMs: 30_000 });
+```
+
+`getOrLoad` reads the entry; on a miss the callers of this process share one computation, and
+with a lock only one process computes: the others wait for its value up to `waitMs` (default
+2 s), then compute it themselves. It never fails because of the lock or the server: the worst
+case is the unprotected one. A failed computation is not cached.
+
+## Lock
+
+`RedisLock` implements the kernel `Lock` port:
+
+```ts
+abstract class Lock {
+  abstract acquire(key: string, options: { ttlMs: number; waitMs?: number }): Promise<LockHandle | undefined>;
+}
+interface LockHandle { readonly key: string; readonly fencingToken: number; release(): Promise<void> }
+```
+
+```ts
+const handle = await lock.acquire('nightly-export', { ttlMs: 60_000 });
+if (handle === undefined) { // another instance is already doing it
+  return;
+}
+try {
+  await exportEverything();
+} finally {
+  await handle.release();
+}
+```
+
+`RedisLock` is the single-instance algorithm of the Redis documentation: `SET key <random
+owner> NX PX ttl`, and a release that deletes the key only if it still holds that owner
+(compare-and-delete), so a holder whose lock expired cannot free the lock of the next one.
+`waitMs` polls every `retryDelayMs` (default 25 ms). `InMemoryLock` of the kernel is the same
+contract inside one process, for tests and single instances; it is what `kernelModule()` of
+`@ddd-ts-kit/di` binds `Lock` to until the platform rebinds it (`builder.rebind(Lock)`, shown
+under [Cache](#cache)).
+
+**What it guarantees, and what it does not.** At most one holder at a time, provided the
+server keeps its data and the holder finishes within `ttlMs`. It is **not a consensus lock**.
+Two holders are possible when:
+
+- the holder is paused (garbage collection, a stalled disk, a suspended container) for longer
+  than the time to live, and keeps working after the lock went to somebody else;
+- the server fails over to a replica that had not received the key yet;
+- the server restarts without persistence, or evicts the key under memory pressure;
+- clocks, on the server side, jump.
+
+So use it to **avoid doing work twice** (a scheduled job on several instances, the
+recomputation of a cache entry, an import): cases where a rare double run costs some waste and
+nothing else. Do **not** use it where two holders would break an invariant. Preventing a
+double booking, a double payment or a duplicated invoice number belongs to a database
+constraint (a unique index, an exclusion constraint, the optimistic version of the aggregate),
+which holds whatever any process believes about a lock.
+
+The **fencing token** grows with each acquisition of a key (`INCR`, in the same script as the
+`SET`). A resource that stores the highest token it has seen can refuse a write from a stale
+holder. It narrows the gap, for resources able to compare; its counter lives in the same
+server and starts again if that server loses its data, so it is not a proof either.
+
+A server that is away makes `acquire` reject: whether somebody holds the key cannot be known,
+and the caller decides.
+
+## Rate limiter
+
+`RedisRateLimiter` implements the kernel `RateLimiter` port:
+
+```ts
+abstract class RateLimiter {
+  abstract consume(key: string, limit: { limit: number; windowMs: number }): Promise<{ allowed: boolean; remaining: number; retryAfterMs: number }>;
+}
+```
+
+A sliding window: at any instant, at most `limit` allowed calls during the `windowMs` before
+it. A refused call is not counted. `RedisRateLimiter` keeps one sorted set per key, one member
+per allowed call, and decides in a single script, so concurrent calls from several instances
+cannot both take the last place.
+
+In front of the HTTP layer, before authentication cost anything (Fastify shown; the same three
+lines fit an Express middleware):
+
+```ts
+// src/platform/http/rate-limit.ts
+const limiter = new RedisRateLimiter(redis.client, { namespace: 'api', onError: 'allow' });
+
+server.addHook('onRequest', async (request, reply) => {
+  const decision = await limiter.consume(`ip:${request.ip}`, { limit: 120, windowMs: 60_000 });
+  reply.header('RateLimit-Remaining', decision.remaining);
+  if (decision.allowed) {
+    return;
+  }
+  reply.header('Retry-After', Math.ceil(decision.retryAfterMs / 1000));
+  return reply.code(429).send({ type: 'about:blank', title: 'Too Many Requests', status: 429, code: 'RATE_LIMITED' });
+});
+```
+
+A use case that must be limited for a business reason (three password resets per hour)
+depends on the `RateLimiter` port of the kernel and receives the adapter by injection
+(`builder.rebind(RateLimiter)`, shown under [Cache](#cache)); `InMemoryRateLimiter` on a
+`FixedClock` is its fake.
+
+- **Exact, at a memory cost.** One member per allowed call: a key costs memory in proportion
+  to its limit. Fine up to thousands per window; for tens of thousands, limit a coarser key or
+  a shorter window.
+- **The clock is the caller's.** Instants come from the `Clock` given to the limiter (the
+  system clock by default), not from the server, so every instance must be synchronized (NTP):
+  a skew between two instances shifts the window by as much. In exchange the limiter is tested
+  on a fixed clock, and the script holds no arithmetic that differs between Lua versions.
+- **`onError`**: `throw` (default) lets the caller decide; `allow` keeps serving without a
+  limit while the server is away (the usual choice in front of an API); `deny` refuses
+  everything (for the few limits that are a security control, such as login attempts).
+- The key expires by itself one window after its last allowed call.
+
+## Relay signal
+
+An outbox relay polls. `RedisRelaySignal` lets it poll rarely and still publish at once, across
+processes: the process that committed a command notifies, a relay in any other process wakes.
+
+```ts
+// the worker that relays
+const signal = new RedisRelaySignal(redis.client, { channel: 'app:outbox' });
+new OutboxRelay({ store, publisher, clock, wakeOn: signal }).start({ intervalMs: 5_000 });
+
+// the API process, before the unit of work so that it notifies after the commit
+commandBus.use(relayWakeUpMiddleware(signal)).use(unitOfWorkMiddleware(unitOfWork));
+```
+
+It satisfies the `RelaySignal` port of `@ddd-ts-kit/events` structurally: this package does not
+depend on `@ddd-ts-kit/events`, so the class does not name the port, and it is accepted wherever
+a `RelaySignal` is expected, `builder.bind(RelaySignal).toValue(signal)` included. It has
+the semantics of the in-memory signal: **a hint, never a delivery**. Publish/subscribe keeps
+nothing for a subscriber that is away; a notification sent while the relay reconnects, or
+before it subscribed, is lost, and the event goes out at the next poll. Keep a real
+`intervalMs`. `notify()` never throws. `close()` closes the listening connection the signal
+opened.
+
+`relayWakeUpMiddleware` notifies after every command that succeeded, whether it published or
+not: a spurious wake-up costs the relay one empty claim. With PostgreSQL, `LISTEN/NOTIFY` from
+the outbox table does the same without another server.
+
+## Event bus on Redis Streams
+
+`RedisStreamsEventBus` is an integration event provider: an `EventBus` of the kernel that
+publishes with `XADD` and resolves only when the server acknowledged every entry, so the
+outbox relay can mark a record published, and consumes through one consumer group per
+consumer with a blocking read on a dedicated connection, acknowledgement after the handler, a
+bounded number of delayed redeliveries and a dead stream. It sits next to the RabbitMQ, Kafka
+and NATS providers, passes `eventBusContract` of `@ddd-ts-kit/testing`, and runs unchanged on
+Redis, Dragonfly and Valkey.
+
+```
+npm i @ddd-ts-kit/redis @ddd-ts-kit/events ioredis
+```
+
+**When to choose this.** You already run and operate Redis, Dragonfly or Valkey, the volume is
+moderate (handlers of a stream run one at a time per instance), and one more server to run is
+worth avoiding. You get consumer groups, redelivery, dead letters and a readable log with one
+dependency. Choose RabbitMQ when you want a broker that owns delivery (publisher confirms
+written to disk, quorum queues replicated before the confirmation, per-message routing), and
+Kafka when you want a durable, replicated log with partitions, per-key ordering and long
+retention. Here durability is what the server is configured for, and retention is bounded by
+memory: see [Guarantees and limits](#guarantees-and-limits).
+
+### Composition root
+
+Handlers never see this package. They publish to the outbox; the relay publishes to the
+streams; each consuming context subscribes through the bus under its own name.
+
+```ts
+// main.ts
+import { SystemClock } from '@ddd-ts-kit/kernel';
+import { OutboxPublisher, OutboxRelay, consume, subscribeAll, validatingPublisher } from '@ddd-ts-kit/events';
+import { RedisStreamsEventBus } from '@ddd-ts-kit/redis/event-bus';
+import { tracedPublisher, tracedSubscriber } from '@ddd-ts-kit/tracing';
+
+const bus = new RedisStreamsEventBus({
+  connection: config.redisUrl, // or ioredis options, or a client you already have (redis.client)
+  prefix: 'integration-events', // the default: one stream per type, `<prefix>:<type>`
+  retry: { maxAttempts: 5, delayMs: 5_000 }, // the defaults
+  visibilityTimeoutMs: 60_000, // the default: above the worst case of a batch of handlers
+  batchSize: 10, // the default
+  onFailure: (failure) => logger.warn(failure), // codes only, never an error message
+  onDelivery: ({ stream, consumer, outcome }) => deliveries.add(1, { stream, consumer, outcome }),
+});
+
+// Publishing side: handlers write to the outbox, in the transaction of the command.
+const publisher = validatingPublisher(new OutboxPublisher(outboxStore), registry);
+
+// The relay target is the bus. A record is marked published when the server answered its entry id.
+const relay = new OutboxRelay({ store: outboxStore, publisher: tracedPublisher(bus), clock: new SystemClock() });
+relay.start({ intervalMs: 500 });
+
+// Consuming side: one subscriber per consuming context, named after it.
+const billingEvents = tracedSubscriber(bus.forConsumer('billing'));
+subscribeAll(billingEvents, [
+  consume(orderPlaced, { consumer: 'billing.ordering-order-placed', processed, unitOfWork }, async (event) => {
+    await commandBus.execute(new IssueInvoice(event.payload.orderId));
+  }),
+]);
+
+await bus.assertTopology(); // fail at startup, not at the first event
+
+process.on('SIGTERM', async () => {
+  await relay.stop(); // the tick in progress finishes
+  await bus.close(); // readers stop, the batch in progress finishes and acknowledges
+});
+```
+
+- `publish(events)` sends the batch as one `MULTI` of `XADD` and resolves only when the server
+  answered an entry id for **every** event. It rejects otherwise (`PUBLISH_NOT_CONFIRMED` with
+  the `eventId` and a `reason` code, `BROKER_UNAVAILABLE`, `EVENT_BUS_CLOSED`). Nothing is
+  buffered for later: the outbox is the buffer.
+- A consumer name is required to subscribe: `bus.forConsumer('billing')` gives an
+  `IntegrationEventSubscriber` for one context (a modular monolith has several, each with a
+  reading connection of its own), and the `consumer` option names the one `bus.subscribe`
+  works for (a service that is a single context).
+- With `@ddd-ts-kit/di`, the declared integration event handlers of a context are subscribed on
+  `EventSubscribers.forContext(<module name>)`. Give it the bus, and each context reads under
+  its own name:
+
+  ```ts
+  import { EventSubscribers } from '@ddd-ts-kit/kernel';
+
+  const app = createApplication({
+    modules: [
+      kernelModule({ eventSubscribers: () => ({ forContext: (name) => bus.forConsumer(name) }) }),
+      contextModule('billing', billingDeclarations),
+    ],
+  });
+
+  // or, from a later module
+  builder.rebind(EventSubscribers).toValue({ forContext: (name) => bus.forConsumer(name) });
+  ```
+- The tracing wrappers work as with any provider (with `@ddd-ts-kit/di`, the consuming side
+  is traced by `kernelModule({ instrumentation: traceApplication() })` and `tracedSubscriber`
+  is left out): the bus carries `traceparent` and
+  `correlationId` untouched, in the envelope and as fields of the entry, across a retry too.
+  Next to the event, each handler receives the delivery (`EventDelivery` of the kernel):
+  `{ attempt, maxAttempts, system: 'redis', destination, consumer }`, where `destination` is the
+  stream. `@ddd-ts-kit/tracing` reads it to make one CONSUMER span per attempt; the bus names
+  itself `messagingSystem: 'redis'`.
+- The correlation makes the round trip. Publish through `scopedPublisher(publisher, scope)` of
+  the kernel and consume with `consume(definition, { ..., scope }, handler)`: the consumer runs
+  in an execution context whose `correlationId` is the one of the request that published,
+  whose `causationId` is the event, and a redelivery runs in the same one. Or give the bus the
+  `scope` option: every handler then runs inside it, under the name of its consumer.
+- A context extracted to its own service keeps its consumer name and so its groups: nothing
+  changes on the server.
+- The publishing connection is the one you give, shared with the other adapters of this
+  package if you hand over `redis.client`. Every consumer name reads on a duplicate of it
+  (`client.duplicate()`), because a blocking read holds its connection. `close()` closes what
+  the bus opened and leaves a client it was handed open.
+
+| Option | Default | Effect |
+|---|---|---|
+| `connection` | required | URL, ioredis options or client. A connection opened here takes `FAIL_FAST` and a reconnection delay from `reconnect` |
+| `prefix`, `streamOf` | `integration-events` | the stream of a type is `<prefix>:<type>`, or what `streamOf(type)` answers |
+| `consumer` | none | the consumer `bus.subscribe` reads for |
+| `instance` | host, process id, random suffix | the name of this process inside its groups; unique per process |
+| `batchSize` | 10 | entries read at once per stream (`COUNT`), then handled in order, one at a time |
+| `blockMs` | 1000 | how long a read waits (`BLOCK`): it bounds `close()` and the precision of the retry delay |
+| `retry` | 5 attempts, 5000 ms | deliveries before the dead stream, and the wait after a failure |
+| `visibilityTimeoutMs` | 60000 | idle time after which the pending entries of another instance are taken over; never less than `retry.delayMs` |
+| `startFrom` | `new` | where a group this bus creates starts: what is published from then on, or `beginning` for the whole stream |
+| `retention` | none | `{ maxLength }` or `{ maxAgeMs }`: trimming applied by each publication. See the limits |
+| `deduplication` | none | `{ windowMs }`: the publish-side guard below |
+| `scope` | none | an `ExecutionScope` every handler runs inside |
+| `reconnect` | 200 ms doubling up to 30 s | delay between reconnections, and between the attempts of a reader that fails |
+
+### Topology
+
+`bus.describeTopology()` returns the streams and the groups as data, for a review or a
+generated document; `bus.assertTopology()` creates them, idempotently. The bus also creates
+its groups before it reads or publishes, and again after any failure of a reader (a server
+that came back without its data has lost them). For `forConsumer('billing')` subscribed to
+`ordering.order.placed`:
+
+| Object | Name | Properties |
+|---|---|---|
+| events stream | `integration-events:ordering.order.placed` | one per event type, shared by every consumer; created empty by the first group (`MKSTREAM`) or by the first publication |
+| consumer group | `billing`, on that stream | one per consumer name; holds its position and its pending entries; created at `$` (or `0` with `startFrom: 'beginning'`) |
+| group member | the `instance` name | one per process; removed at `close()` when it leaves nothing pending |
+| dead stream | `integration-events:ordering.order.placed:billing:dead` | one per consumer and type, created by the first dead letter; no group reads it |
+
+An entry holds the envelope as JSON in the field `envelope` (`id`, `type`, `version`,
+`occurredAt`, `payload`, `traceparent`, `correlationId`) and, beside it, the fields `id`,
+`type`, `version`, `traceparent` and `correlation-id`: an operator reads them with `XRANGE`
+without parsing the body, and any client of the protocol can consume the stream.
+
+Two consumers of one type have a group each and both receive every event. Two instances of one
+consumer are two members of its group: each event goes to one of them.
+
+**Ordering.** One instance receives the events of a type in the order of the stream, which is
+the order the server took them in. That order is broken by a redelivery (the failed event
+comes back after later ones were handled) and by competing instances (two members of a group
+progress independently). There is no order across types, and none per aggregate: carry a
+version in the payload when it matters.
+
+### Retry and dead-letter behaviour
+
+1. An entry is acknowledged (`XACK`) after every handler subscribed to its type resolved. Use
+   `consume` of `@ddd-ts-kit/events`: the acknowledgement then follows the commit of the unit
+   of work, and a redelivery is deduplicated.
+2. When a handler throws, the entry is not acknowledged: it stays in the pending entry list of
+   the group, owned by this instance, and its idle time restarts at the failure. Once it has
+   been idle for `retry.delayMs`, the instance claims it again (`XPENDING` with `IDLE`, then
+   `XCLAIM`). A failed entry is never handled again on the spot: no hot loop.
+3. The attempt number is the delivery counter the server keeps in the pending entry list: 1
+   for the first read, incremented by each claim. At the `retry.maxAttempts`-th failed
+   delivery the entry is copied to the dead stream with `dead-reason: max-attempts`,
+   `error-code`, `attempt`, `consumer` and `entry-id` (its id in the events stream), and
+   acknowledged, in one script: never one without the other.
+4. The pending entries of an instance that died, or that is stuck, are taken over by another
+   instance of the consumer once they have been idle for `visibilityTimeoutMs`. That delivery
+   counts as an attempt. An entry that used all its attempts this way, never answered by a
+   handler, goes to the dead stream with `error-code: ATTEMPTS_EXHAUSTED` without being
+   handled again: an event that kills its consumers does not kill them forever.
+5. An entry that does not hold an envelope (no `envelope` field, unparseable, or without `id`,
+   `type`, `version`, `occurredAt`) is poison: it goes straight to the dead stream with
+   `dead-reason: poison` and `error-code: POISON_ENTRY`, and no handler sees it.
+6. Only codes travel: `error-code` is the `code` of the error or its class name. The message
+   of an error is never logged, reported or attached, because it may quote payload data.
+
+Delivery is at least once. An acknowledgement lost to a disconnection, a claim racing a slow
+handler, a relay retry: each delivers an event twice, never zero times.
+
+On a lost connection ioredis reconnects with the delay of `reconnect`; `publish` rejects at
+once between two attempts (`BROKER_UNAVAILABLE`), so the outbox relay keeps the records and
+retries them, and the readers resume where their groups are. Entries that were being handled
+stay pending and are claimed again.
+
+### Publishing twice
+
+Redis Streams have **no publish-side deduplication**: an `XADD` that succeeded but whose
+answer was lost is appended again by the retry of the relay, and both entries are delivered.
+The answer is the same as for every provider: the consumer deduplicates, with a
+processed-event store in the transaction of its handler (`consume`).
+
+A cheap guard narrows the window, as an option:
+
+```ts
+new RedisStreamsEventBus({ connection, deduplication: { windowMs: 3_600_000 } });
+```
+
+Each event is then appended by a script that first looks for the key
+`<stream>:<event id>:published`, appends only if it is absent, and writes it with the window
+as its time to live. A relay retry within the window appends nothing and is acknowledged. It
+is a guard, not a guarantee: the mark is one more key, evicted or lost with the server like
+any other, and it costs one key per event for the duration of the window. Consumers still
+deduplicate. Verified on Dragonfly v2.0.2, Valkey 9.1.2 and Redis 8.10.2. (Redis 8.10.2
+reports a server-side idempotent append in `XINFO STREAM`; it is not used, the two other
+servers do not have it.)
+
+### Operations
+
+What to watch, with the commands of any client (`<stream>` is `<prefix>:<type>`):
+
+| Signal | Command | Meaning |
+|---|---|---|
+| outbox `stats()` (`pending`, `failed`, `dead`) | the outbox store | the publishing side: see `@ddd-ts-kit/events` |
+| lag of a consumer | `XINFO GROUPS <stream>`: `lag`, `last-delivered-id` | entries not read yet: the consumer is late or stopped |
+| pending entries | `XINFO GROUPS <stream>`: `pending`; detail with `XPENDING <stream> <consumer> - + 10` (owner, idle time, deliveries) | being handled, or waiting for a redelivery; a plateau means a handler that keeps failing, an idle time above the visibility timeout means nobody reads |
+| depth of the dead stream | `XLEN <stream>:<consumer>:dead` | must be 0: alert on anything else |
+| what died and why | `XRANGE <stream>:<consumer>:dead - + COUNT 10`: `error-code`, `dead-reason`, `attempt` | the code to look for in the logs of the consumer |
+| members of a group | `XINFO CONSUMERS <stream> <consumer>` | instances; one that crashed stays listed until removed |
+| memory of a stream | `XLEN <stream>`, `MEMORY USAGE <stream>` | streams only grow unless trimmed |
+| `onDelivery` counted by `outcome` | this bus | rate of `retried`, `dead`, `poison` against `acknowledged` |
+| `onFailure` with `kind: 'connection'` | this bus | reconnections (`CONNECTION_LOST`, `ECONNREFUSED`) and what the server refused to a reader (`REDIS_NOGROUP`) |
+| `bus.deliveriesInFlight` | this bus | entries read and not settled; stuck above 0 means a handler that hangs |
+
+Replaying dead entries, once the cause is fixed:
+
+```ts
+const replayed = await bus.replayDead({ consumer: 'billing', type: 'ordering.order.placed' }, 100);
+```
+
+It moves up to that many entries, oldest first, from the dead stream back to the events
+stream, each in one script (appended, then deleted from the dead stream). The new entry has a
+fresh attempt budget and carries `replay-for: billing`: the other consumers of the type
+acknowledge it without handling it. A client of your own that reads the stream should skip an
+entry whose `replay-for` names somebody else. Look at `dead-reason` and `error-code` first:
+replaying a poison entry only kills it again.
+
+Housekeeping:
+
+- A consumer stopped for good: `XGROUP DESTROY <stream> <consumer>` and delete its dead
+  stream. Unsubscribing only stops reading; the group keeps its position and its lag grows.
+- An instance that crashed stays a member of its groups. Its pending entries are taken over
+  after the visibility timeout; remove the name with `XGROUP DELCONSUMER <stream> <consumer>
+  <instance>` once `XINFO CONSUMERS` shows it with 0 pending (deleting a member drops its
+  pending entries).
+- Trimming by hand, when no `retention` is configured: `XTRIM <stream> MINID ~ <id>` with an
+  id every group has passed (`last-delivered-id` of `XINFO GROUPS`) and nothing pending below.
+
+### Guarantees and limits
+
+- **Durability is the server's, and it is a setting.** An entry is acknowledged when the
+  server holds it in memory. What survives a crash depends on persistence: with Redis or
+  Valkey and `appendonly yes`, `appendfsync everysec` (the usual setting) can lose about the
+  last second of acknowledged entries and `always` none, at a cost on every write; with
+  snapshots only (RDB, and Dragonfly, which persists by snapshots), everything since the last
+  snapshot is lost; without persistence a restart starts empty. Replication is asynchronous:
+  a failover can lose what the replica had not received. For an event log this means an event
+  the relay marked published can vanish, and no consumer will ever see it. A broker that
+  confirms after writing to a replicated log does not have that window. Decide whether your
+  events tolerate it, set persistence accordingly, and do not purge published outbox records
+  before your backup horizon.
+- **The positions are in the same server.** Groups, pending entries and delivery counters are
+  lost or rewound with the data. A server restored from an older snapshot delivers again what
+  was handled since (consumers deduplicate); a server that lost everything gets its groups
+  created again at the end of empty streams.
+- **No publish-side deduplication**, as said above.
+- **Retention is bounded by memory.** A stream lives in memory, entirely. By default nothing
+  is trimmed. `retention: { maxLength }` (`MAXLEN ~`) and `retention: { maxAgeMs }`
+  (`MINID ~`, by the clock of the publisher) trim at each publication, approximately, and
+  **without regard for the groups**: an entry no consumer has read yet, or one waiting for
+  its redelivery, is dropped with the rest and silently leaves the pending list at its next
+  claim. Size the cap far above the worst lag you accept, or trim by hand. Dead streams are
+  never trimmed.
+- **Eviction applies to everything.** Under `allkeys-*` a whole stream can be evicted. Run the
+  event bus on a server with `noeviction` (a publication then fails when memory is full, and
+  the relay retries), not on the one that is your cache.
+- **One at a time per stream and instance.** Throughput is that of your handlers in sequence;
+  scale with instances, at the price of ordering. Types are handled in parallel inside a
+  batch, but a turn ends when its slowest stream does.
+- **The visibility timeout must exceed the worst case of a batch** (`batchSize` times the
+  slowest handler): beyond it another instance takes the entries over while the first is still
+  working, and they are handled twice. With slow handlers, lower `batchSize`.
+- **One delay.** The same wait before every retry, no exponential backoff, precise to
+  `blockMs`. A failed entry whose instance stops is retried by another one after the
+  visibility timeout, not after the retry delay.
+- **A redelivery runs every handler of the type again**, those that succeeded included, when
+  several handlers of one consumer subscribe to the same type. Each must be idempotent.
+- **A batch is one transaction on one server**: all its entries are appended, or the
+  publication rejects. A rejection does not prove nothing was appended (the answer may have
+  been lost); the relay retries and consumers deduplicate.
+- **A new group starts at the end of the stream** by default: what was published before a
+  consumer first subscribed is not delivered to it. `startFrom: 'beginning'` reads what the
+  stream still holds.
+- **A subscription added while the consumer is reading** is read from the next turn, up to
+  `blockMs` later. Nothing is missed: its group exists before the bus publishes.
+- **One server or a primary with replicas.** A read covers the streams of a consumer in one
+  command and a dead letter touches two keys in one script: on a Redis Cluster the keys must
+  share a slot, which a `prefix` in braces gives (`{events}`). Not tested on a cluster.
+- **A crashed process leaves its name** in its groups, and a deduplication mark per event for
+  the window, when the guard is on: housekeeping above.
+
+## What is not here: a processed-event store
+
+There is deliberately no `RedisProcessedEventStore`. The idempotency of a consumer only holds
+if "this event was processed" commits **with** the state change it stands for
+(`events/consumer-idempotent`). A mark in Redis and a change in PostgreSQL are two systems: a
+crash between the two either loses the event (mark kept, change rolled back) or processes it
+twice. Use the store of your database adapter (`KnexProcessedEventStore`,
+`DrizzleProcessedEventStore`), in the unit of work of the consumer.
+
+The same reasoning applies to the outbox itself and to anything that must be atomic with
+business data: it lives in the database.
+
+## Compatibility: the commands used
+
+| Adapter | Commands |
+|---|---|
+| `RedisCache` | `GET`, `SET` (with `PX`), `DEL`, `SCAN` (with `MATCH`, `COUNT`) |
+| `RedisLock` | `EVAL` of two scripts calling `SET` (with `NX`, `PX`), `INCR`, `GET`, `DEL` |
+| `RedisRateLimiter` | `EVAL` of one script calling `ZREMRANGEBYSCORE`, `ZCARD`, `ZADD`, `PEXPIRE`, `ZRANGE` (with `WITHSCORES`) |
+| `RedisRelaySignal` | `PUBLISH`, `SUBSCRIBE` |
+| `RedisStreamsEventBus`, publishing | `MULTI`, `EXEC`, `XADD` (with `MAXLEN ~` or `MINID ~` under `retention`); under `deduplication`, `EVAL` of one script calling `GET`, `XADD`, `SET` (with `PX`) |
+| `RedisStreamsEventBus`, consuming | `XGROUP CREATE` (with `MKSTREAM`), `XREADGROUP` (with `GROUP`, `COUNT`, `BLOCK`, several streams), `XACK`, `XPENDING` (extended form, with `IDLE` and with a consumer), `XCLAIM` (with a minimum idle time, and with `JUSTID`), `XGROUP DELCONSUMER`, `EVAL` of one script calling `XADD`, `XACK` |
+| `RedisStreamsEventBus`, `replayDead` | `XRANGE` (with `COUNT`), `EVAL` of one script calling `XRANGE`, `XADD`, `XDEL` |
+| `redisHealth`, `close` | `PING`, `QUIT` |
+| ioredis itself, at connection | `HELLO 3` (ioredis 6; replies are mapped to their classic shape), `INFO`, `CLIENT SETINFO`, and `AUTH`, `SELECT` when the URL asks |
+
+Choices made for portability:
+
+- Scripts are sent with `EVAL`, not `EVALSHA`: no script cache to warm or to lose behind a
+  proxy or after a failover. They are a few lines each.
+- Every key a script touches is declared in `KEYS`: Dragonfly refuses a script that reaches
+  an undeclared key (Valkey runs it), and a cluster needs the keys for routing. The two keys of the lock share a hash tag (`{key}`).
+- Lua is kept to commands and comparisons. No arithmetic on scores, no `redis.call('TIME')`,
+  no `cjson`, no `redis.setresp`: Redis and Valkey embed Lua 5.1, Dragonfly Lua 5.4, and they
+  differ on numbers. Measured on the two servers above: a script returning `10/4` answers `2`
+  on Valkey and `2.5` on Dragonfly, and `tostring(10/2)` is `5` on one and `5.0` on the other.
+- No `KEYS`, no `UNLINK`, no keyspace notifications, no modules, no functions. Streams are used
+  by the event bus only.
+- The scripts of the event bus pass a variable number of fields with `unpack(ARGV, n)` and
+  test an empty reply with `#`: both behave the same on Lua 5.1 and 5.4, checked on the three
+  servers. A dead letter is a script, not a `MULTI`: a transaction would acknowledge the entry
+  even if its copy to the dead stream had failed.
+- Redeliveries use `XPENDING` then `XCLAIM`, not `XAUTOCLAIM`. `XAUTOCLAIM` works on the three
+  servers, but answers no delivery counter, and the bounded retries need it.
+- The blocking read goes through the named command of ioredis (`client.xreadgroup`), never
+  `client.call('XREADGROUP')`: under RESP3, which ioredis 6 speaks, only the commands it knows
+  have their reply mapped back to the classic shape.
+- `deleteByPrefix` deletes one key per `DEL`, since a cluster refuses a `DEL` whose keys live
+  in different slots.
+
+What differs between the servers, as far as the event bus is concerned, and is absorbed:
+
+- `XREADGROUP` on several streams answers every stream on Dragonfly, those without a new
+  entry with an empty list; Redis and Valkey leave them out.
+- A command on a stream that no longer exists is refused as `NOGROUP` by Redis and Valkey;
+  Dragonfly answers `ERR no such key` to `XPENDING`. Both make the reader create its groups
+  again; the code reported is `REDIS_NOGROUP` or `REDIS_ERR`.
+- An empty blocking read lasted its `BLOCK` time on Dragonfly and Redis, and was measured at
+  about 100 ms more on Valkey.
+
+Tested against Dragonfly v2.0.2, Valkey 9.1.2 and Redis 8.10.2 with ioredis 6, same suite,
+same results. The suite needs a server and is skipped without `DDD_TS_KIT_TEST_REDIS_URL`:
+
+```
+docker run -d --rm --name ddd-ts-kit-test-redis -p 127.0.0.1:6390:6379 docker.dragonflydb.io/dragonflydb/dragonfly:v2.0.2
+DDD_TS_KIT_TEST_REDIS_URL=redis://127.0.0.1:6390 npx vitest run packages/redis
+```
+
+The specs write under a random namespace per test and never flush the server. Those of the
+event bus run the contract suite (with its defaults, then with the publication guard and capped
+streams), the behaviours of the provider (acknowledged publication cut mid-flight, redelivery,
+dead-lettering, replay, poison, competing and separate consumers, takeover after the visibility
+timeout, groups lost and created again, reconnection through a TCP relay the test cuts,
+graceful close) and the whole chain from the outbox to an idempotent consumer. Each test works
+under a prefix of its own and deletes its keys.
+
+## Contract suites
+
+Each port has a suite that its in-memory implementation and its adapter both pass. An adapter
+of your own (another client library, another store) is held to the same:
+
+```ts
+import { cacheContract, lockContract, rateLimiterContract } from '@ddd-ts-kit/testing/contracts';
+
+const runner = { describe, it, expect, beforeEach };
+cacheContract(runner, { name: 'MyCache', createCache: () => new MyCache(), elapse: (ms) => sleep(ms) });
+lockContract(runner, { name: 'MyLock', createLock: () => new MyLock(), elapse: (ms) => sleep(ms) });
+rateLimiterContract(runner, { name: 'MyLimiter', createLimiter: () => new MyLimiter(clock), elapse: (ms) => clock.advance(ms) });
+```
+
+`elapse` makes time pass for the subject: advance the clock it reads, or really wait when the
+time is the server's. The suites live in `@ddd-ts-kit/testing/contracts`, with those of the
+other kernel ports, where the in-memory implementations of the kernel are run against them;
+`@ddd-ts-kit/redis/testing` re-exports them.
+
+## Limits
+
+- **One server or a primary with replicas.** A Redis Cluster works for the cache (one key per
+  command) and the lock (hash tag); `deleteByPrefix` would have to scan every node, which it
+  does not. Not tested on a cluster.
+- **Eviction applies to everything.** A server configured to evict (`allkeys-lru`) may evict
+  a lock or a rate-limit key as well as a cache entry. Use a `volatile-*` policy, or a second
+  server for what is not a cache.
+- **No client-side caching, no pipelining of `get`**: each read is a round trip.
+- **Values are JSON by default**: `undefined`, `Date`, `Map`, `bigint` and class instances do
+  not survive. Give a codec, or cache plain data.
+- **The lock is not re-entrant and is not renewed**: choose `ttlMs` above the worst case of
+  the work, or split the work.
+- **ioredis 5** is accepted as a peer; the suites were only run with ioredis 6.