@dan-ai-studio/dshopencodego 0.1.94 → 0.1.95

package/README.en.md

@@ -293,7 +293,7 @@ npm run seed        # refresh the bundled catalog seed before a release (see "Re
 
 **Order matters**: `npm run build` must come before `npm test` — `tests/pack-contents.spec.ts` walks every `exports` target, and whether `lib/` exists decides whether that check runs or is silently skipped (it does not fail, it just stops protecting you). `package.json` no longer carries `prepare`, so `npm ci` will not build for you; all three CI workflows run `npm run build` explicitly.
 
-The suite covers configuration validation, the protocol ladder, gateway and online metadata, the catalog projection, the adapter on the wire (all three protocols), Remote contracts and services, session-header invariants, usage windows and the meter, the client controller and usage pill, both halves' mounting and registration, the error mapping for stream idle timeouts and aborts, the exit-code contract of the verification scripts, and several **structural invariants** (inject declarations match the source's reads, peer coverage holds both ways, the READMEs match the manifest, and the READMEs' claims about the upstream match the upstream actually installed). That is **64 test files** — a number `tests/readme-consistency.spec.ts` checks against the `tests/` directory, so it cannot drift.
+The suite covers configuration validation, the protocol ladder, gateway and online metadata, the catalog projection, the adapter on the wire (all three protocols), Remote contracts and services, session-header invariants, usage windows and the meter, the client controller and usage pill, both halves' mounting and registration, the error mapping for stream idle timeouts and aborts, the exit-code contract of the verification scripts, and several **structural invariants** (inject declarations match the source's reads, peer coverage holds both ways, the READMEs match the manifest, and the READMEs' claims about the upstream match the upstream actually installed). That is **65 test files** — a number `tests/readme-consistency.spec.ts` checks against the `tests/` directory, so it cannot drift.
 
 ## Releasing (maintainers)
 

package/README.md

@@ -292,7 +292,7 @@ npm run seed        # 发版前刷新捆绑的目录种子（见「发布」）
 
 **顺序有讲究**：`npm run build` 要排在 `npm test` 之前——`tests/pack-contents.spec.ts` 会遍历 `exports` 的每个目标，`lib/` 存在与否决定这条检查是执行还是被跳过（不报错，但会少一层保护）。`package.json` 已移除 `prepare`，因此 `npm ci` 不会再替你隐式构建；三个 CI workflow 都显式跑了 `npm run build`。
 
-测试覆盖配置校验、协议阶梯、网关与在线元数据、目录投影、适配器（三种协议的线上请求）、Remote 契约与服务、会话头不变量、用量窗口与计量、客户端控制器与用量组件、两半的挂载与登记、流空闲超时与中止的错误映射、验证脚本的退出码契约、以及几条**结构性不变量**（inject 声明与源码读取一致、peer 覆盖双向、README 与 manifest 一致、README 对上游的断言与实装的上游一致）。共 **64 个测试文件**——这个数字由 `tests/readme-consistency.spec.ts` 对着 `tests/` 目录校验，不会漂移。
+测试覆盖配置校验、协议阶梯、网关与在线元数据、目录投影、适配器（三种协议的线上请求）、Remote 契约与服务、会话头不变量、用量窗口与计量、客户端控制器与用量组件、两半的挂载与登记、流空闲超时与中止的错误映射、验证脚本的退出码契约、以及几条**结构性不变量**（inject 声明与源码读取一致、peer 覆盖双向、README 与 manifest 一致、README 对上游的断言与实装的上游一致）。共 **65 个测试文件**——这个数字由 `tests/readme-consistency.spec.ts` 对着 `tests/` 目录校验，不会漂移。
 
 ## 发布（维护者）
 

package/lib/client.js

@@ -173,6 +173,75 @@ var catalogRemote = {
   ]
 };
 
+// src/desktop/contract.ts
+function parseRelease(value) {
+  if (value === null || typeof value !== "object") throw new Error("invalid desktop release");
+  const row = value;
+  const version = row["version"];
+  const url = row["url"];
+  if (typeof version !== "string" || version.length === 0) throw new Error("invalid desktop release");
+  if (typeof url !== "string" || url.length === 0) throw new Error("invalid desktop release");
+  const size = row["size"];
+  const sha512 = row["sha512"];
+  const stagingPercentage = row["stagingPercentage"];
+  const releaseDate = row["releaseDate"];
+  return {
+    version,
+    url,
+    ...typeof size === "number" && Number.isFinite(size) && size >= 0 ? { size } : {},
+    ...typeof sha512 === "string" && sha512.length > 0 ? { sha512 } : {},
+    ...typeof stagingPercentage === "number" && Number.isFinite(stagingPercentage) ? { stagingPercentage } : {},
+    ...typeof releaseDate === "string" && releaseDate.length > 0 ? { releaseDate } : {}
+  };
+}
+function parseDesktopReading(value) {
+  if (value === null || typeof value !== "object") throw new Error("invalid desktop reading");
+  const row = value;
+  if (typeof row["checked"] !== "boolean") throw new Error("invalid desktop reading");
+  if (typeof row["checkedAt"] !== "number" || !Number.isFinite(row["checkedAt"])) {
+    throw new Error("invalid desktop reading");
+  }
+  if (typeof row["platform"] !== "string") throw new Error("invalid desktop reading");
+  if (typeof row["channel"] !== "string") throw new Error("invalid desktop reading");
+  const release = row["release"];
+  return {
+    checked: row["checked"],
+    checkedAt: row["checkedAt"],
+    platform: row["platform"],
+    channel: row["channel"],
+    ...release === void 0 ? {} : { release: parseRelease(release) }
+  };
+}
+var codec2 = {
+  mode: "strict",
+  typeSymbol: "@dan-ai-studio/dshopencodego#DesktopReading",
+  schema: { parse: parseDesktopReading },
+  create: () => ({ parse: parseDesktopReading })
+};
+var desktopRemote = {
+  package: "@dan-ai-studio/dshopencodego",
+  descriptors: [
+    {
+      id: "@dan-ai-studio/dshopencodego#opencodeGoDesktop/readDesktop",
+      service: "opencodeGoDesktop",
+      namespace: "opencodeGoDesktop",
+      method: "readDesktop",
+      invocation: { kind: "direct" },
+      parameters: [],
+      result: codec2
+    },
+    {
+      id: "@dan-ai-studio/dshopencodego#opencodeGoDesktop/refreshDesktop",
+      service: "opencodeGoDesktop",
+      namespace: "opencodeGoDesktop",
+      method: "refreshDesktop",
+      invocation: { kind: "direct" },
+      parameters: [],
+      result: codec2
+    }
+  ]
+};
+
 // src/network/contract.ts
 function parseNetworkReading(value) {
   if (value === null || typeof value !== "object") throw new Error("invalid network reading");
@@ -187,7 +256,7 @@ function parseNetworkReading(value) {
     ...typeof failed === "boolean" ? { failed } : {}
   };
 }
-var codec2 = {
+var codec3 = {
   mode: "strict",
   typeSymbol: "@dan-ai-studio/dshopencodego#NetworkReading",
   schema: { parse: parseNetworkReading },
@@ -203,7 +272,7 @@ var networkRemote = {
       method: "readNetwork",
       invocation: { kind: "direct" },
       parameters: [],
-      result: codec2
+      result: codec3
     }
   ]
 };
@@ -345,7 +414,7 @@ function parseRequestLogSnapshot(value) {
     ...typeof row["poolKey"] === "string" ? { poolKey: row["poolKey"] } : {}
   };
 }
-var codec3 = {
+var codec4 = {
   mode: "strict",
   typeSymbol: "@dan-ai-studio/dshopencodego#RequestLogSnapshot",
   schema: { parse: parseRequestLogSnapshot },
@@ -361,7 +430,7 @@ var requestLogRemote = {
       method: "readLog",
       invocation: { kind: "direct" },
       parameters: [],
-      result: codec3
+      result: codec4
     }
   ]
 };
@@ -385,7 +454,7 @@ function parseUpdateStatus(value) {
     checked: row["checked"]
   };
 }
-var codec4 = (typeSymbol, parse) => ({
+var codec5 = (typeSymbol, parse) => ({
   mode: "strict",
   typeSymbol,
   schema: { parse },
@@ -401,7 +470,7 @@ var updateRemote = {
       method: "readUpdate",
       invocation: { kind: "direct" },
       parameters: [],
-      result: codec4("@dan-ai-studio/dshopencodego#UpdateStatus", parseUpdateStatus)
+      result: codec5("@dan-ai-studio/dshopencodego#UpdateStatus", parseUpdateStatus)
     },
     {
       id: "@dan-ai-studio/dshopencodego#opencodeGoUpdate/refreshUpdate",
@@ -410,7 +479,7 @@ var updateRemote = {
       method: "refreshUpdate",
       invocation: { kind: "direct" },
       parameters: [],
-      result: codec4("@dan-ai-studio/dshopencodego#UpdateStatus", parseUpdateStatus)
+      result: codec5("@dan-ai-studio/dshopencodego#UpdateStatus", parseUpdateStatus)
     }
   ]
 };
@@ -476,7 +545,7 @@ function parseGoMeter(value) {
     })
   };
 }
-var codec5 = (typeSymbol, parse) => ({
+var codec6 = (typeSymbol, parse) => ({
   mode: "strict",
   typeSymbol,
   schema: { parse },
@@ -492,7 +561,7 @@ var usageRemote = {
       method: "readWindows",
       invocation: { kind: "direct" },
       parameters: [],
-      result: codec5("@dan-ai-studio/dshopencodego#GoUsageWindows", parseUsageWindows)
+      result: codec6("@dan-ai-studio/dshopencodego#GoUsageWindows", parseUsageWindows)
     },
     {
       id: "@dan-ai-studio/dshopencodego#opencodeGoUsage/readMeter",
@@ -501,7 +570,7 @@ var usageRemote = {
       method: "readMeter",
       invocation: { kind: "direct" },
       parameters: [],
-      result: codec5("@dan-ai-studio/dshopencodego#GoMeter", parseGoMeter)
+      result: codec6("@dan-ai-studio/dshopencodego#GoMeter", parseGoMeter)
     }
   ]
 };
@@ -3460,6 +3529,7 @@ function apply(ctx) {
       ...catalogRemote.descriptors,
       ...updateRemote.descriptors,
       ...networkRemote.descriptors,
+      ...desktopRemote.descriptors,
       ...requestLogRemote.descriptors
     ]
   });

package/lib/index.js

@@ -80611,7 +80611,7 @@ function createUpdateChecker(deps) {
 }
 
 // src/update/version.ts
-var PLUGIN_VERSION = true ? "0.1.94" : "0.0.0-dev";
+var PLUGIN_VERSION = true ? "0.1.95" : "0.0.0-dev";
 
 // src/update/service.ts
 import { TypertRemoteService as TypertRemoteService5 } from "@deepseek-ai/dsh-typert-protocol";

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@dan-ai-studio/dshopencodego",
-  "version": "0.1.94",
+  "version": "0.1.95",
   "description": "OpenCode Go provider for DeepSeek Harness: live gateway catalog, per-conversation session header, usage",
   "type": "module",
   "license": "MIT",