@dan-ai-studio/dshopencodego 0.1.44 → 0.1.46

package/README.en.md

@@ -6,12 +6,18 @@ Makes [DeepSeek Harness](https://github.com/deepseek-ai/deepseek-harness) work p
 
 ## Why it exists
 
-A stock DSH route to OpenCode Go has two gaps that no configuration can close:
+A stock DSH route to OpenCode Go already works (`llm-pi-ai` ships the provider). What this plugin adds is what that route does **not** do:
 
-1. **The model list is a build-time snapshot.** DSH's `llm-pi-ai` uses the catalog pi-ai shipped with; when the gateway adds a model, you either wait for a pi-ai release or declare it by hand.
-2. **No session header.** Since 2026-09-05 Go requires a stable `x-opencode-session` on every request and answers `400 MissingSessionID` without it; `llm-pi-ai` sends only static profile headers, which cannot vary per conversation.
+| Capability | Stock DSH | This plugin |
+| --- | --- | --- |
+| **Live model catalog** | A build-time snapshot: the fixed table pi-ai ships with, so a new gateway model waits for a pi-ai release | Reads the gateway catalog live, with multi-level fallback and TTL caching |
+| **Quota windows** (5-hour / weekly / monthly) | None | ✅ |
+| **Estimated spend** | None | ✅ |
+| **Per-model switches** `modelVisibility` | None | ✅ |
+
+This plugin serves the `opencode-go` route with its own adapter and adds the usage and settings surfaces.
 
-This plugin serves the `opencode-go` route with its own adapter and closes both gaps.
+> **On the session header**: Go requires a stable `x-opencode-session` on every request and answers `400 MissingSessionID` without it. That was one of this plugin's original reasons to exist, but pi-ai implemented the injection on 2026-09-09 (`561a2e06`) and `llm-pi-ai` carries it automatically, so a stock DSH route does not miss the header either. This plugin still keeps its own implementation — it falls back to a one-off UUID when a session id is missing — until that fallback lands upstream; the review is in [`docs/scope-review-2026-10.md`](docs/scope-review-2026-10.md).
 
 ## Install
 
@@ -241,7 +247,7 @@ npm test            # contract tests against a real local HTTP mock gateway
 
 **Order matters**: `npm run build` must come before `npm test` — `tests/pack-contents.spec.ts` walks every `exports` target, and whether `lib/` exists decides whether that check runs or is silently skipped (it does not fail, it just stops protecting you). `package.json` no longer carries `prepare`, so `npm ci` will not build for you; all three CI workflows run `npm run build` explicitly.
 
-The suite covers configuration validation, the protocol ladder, gateway and online metadata, the catalog projection, the adapter on the wire (all three protocols), Remote contracts and services, session-header invariants, usage windows and the meter, the client controller and usage pill, both halves' mounting and registration, the error mapping for stream idle timeouts and aborts, the exit-code contract of the verification scripts, and several **structural invariants** (inject declarations match the source's reads, peer coverage holds both ways, the READMEs match the manifest). That is **43 test files** — a number `tests/readme-consistency.spec.ts` checks against the `tests/` directory, so it cannot drift.
+The suite covers configuration validation, the protocol ladder, gateway and online metadata, the catalog projection, the adapter on the wire (all three protocols), Remote contracts and services, session-header invariants, usage windows and the meter, the client controller and usage pill, both halves' mounting and registration, the error mapping for stream idle timeouts and aborts, the exit-code contract of the verification scripts, and several **structural invariants** (inject declarations match the source's reads, peer coverage holds both ways, the READMEs match the manifest, and the READMEs' claims about the upstream match the upstream actually installed). That is **44 test files** — a number `tests/readme-consistency.spec.ts` checks against the `tests/` directory, so it cannot drift.
 
 ## Releasing (maintainers)
 

package/README.md

@@ -6,12 +6,18 @@
 
 ## 为什么需要它
 
-原生 DSH 接 OpenCode Go 有两个缺口，都不是配置能补的：
+原生 DSH 已经能连 OpenCode Go（`llm-pi-ai` 内置该 provider）。本插件补的是它**不提供**的那几件事：
 
-1. **模型列表是构建期快照**。DSH 的 `llm-pi-ai` 用 pi-ai 打包时生成的目录；网关新增模型后，要么等 pi-ai 发版，要么手工声明。
-2. **没有会话头**。Go 自 2026-09-05 起要求每个请求带稳定的 `x-opencode-session`，缺失即 `400 MissingSessionID`；`llm-pi-ai` 只发静态 profile headers，无法按会话取值。
+| 能力 | 原生 DSH | 本插件 |
+| --- | --- | --- |
+| **实时模型目录** | 构建期快照：pi-ai 打包时生成的固定表，网关新增模型要等 pi-ai 发版 | 实时读取网关目录，多级回退 + TTL 缓存 |
+| **额度窗口**（5 小时 / 本周 / 本月） | 无 | ✅ |
+| **花费估算** | 无 | ✅ |
+| **逐模型开关** `modelVisibility` | 无 | ✅ |
+
+本插件为 `opencode-go` 路由提供自己的适配器，并提供用量与设置界面。
 
-本插件为 `opencode-go` 路由提供自己的适配器，同时解决这两点。
+> **关于会话头**：Go 要求每个请求带稳定的 `x-opencode-session`，缺失即 `400 MissingSessionID`。这一项曾是本插件的原始存在理由，但 pi-ai 已于 2026-09-09（`561a2e06`）实现注入、`llm-pi-ai` 自动携带，因此**原生 DSH 现在也不会缺会话头**。本插件当前仍保留自己的实现（为缺失会话 id 的请求提供一次性 UUID 兜底），待该兜底进入上游后再收缩——评估过程见 [`docs/scope-review-2026-10.md`](docs/scope-review-2026-10.md)。
 
 ## 安装
 
@@ -241,7 +247,7 @@ npm test            # 契约测试：真实 HTTP mock 网关，断言请求头/
 
 **顺序有讲究**：`npm run build` 要排在 `npm test` 之前——`tests/pack-contents.spec.ts` 会遍历 `exports` 的每个目标，`lib/` 存在与否决定这条检查是执行还是被跳过（不报错，但会少一层保护）。`package.json` 已移除 `prepare`，因此 `npm ci` 不会再替你隐式构建；三个 CI workflow 都显式跑了 `npm run build`。
 
-测试覆盖配置校验、协议阶梯、网关与在线元数据、目录投影、适配器（三种协议的线上请求）、Remote 契约与服务、会话头不变量、用量窗口与计量、客户端控制器与用量组件、两半的挂载与登记、流空闲超时与中止的错误映射、验证脚本的退出码契约、以及几条**结构性不变量**（inject 声明与源码读取一致、peer 覆盖双向、README 与 manifest 一致）。共 **43 个测试文件**——这个数字由 `tests/readme-consistency.spec.ts` 对着 `tests/` 目录校验，不会漂移。
+测试覆盖配置校验、协议阶梯、网关与在线元数据、目录投影、适配器（三种协议的线上请求）、Remote 契约与服务、会话头不变量、用量窗口与计量、客户端控制器与用量组件、两半的挂载与登记、流空闲超时与中止的错误映射、验证脚本的退出码契约、以及几条**结构性不变量**（inject 声明与源码读取一致、peer 覆盖双向、README 与 manifest 一致、README 对上游的断言与实装的上游一致）。共 **44 个测试文件**——这个数字由 `tests/readme-consistency.spec.ts` 对着 `tests/` 目录校验，不会漂移。
 
 ## 发布（维护者）
 

package/lib/index.js

@@ -45707,7 +45707,7 @@ function createUpdateChecker(deps) {
 }
 
 // src/update/version.ts
-var PLUGIN_VERSION = true ? "0.1.44" : "0.0.0-dev";
+var PLUGIN_VERSION = true ? "0.1.46" : "0.0.0-dev";
 
 // src/update/service.ts
 import { TypertRemoteService as TypertRemoteService2 } from "@deepseek-ai/dsh-typert-protocol";
@@ -45850,36 +45850,6 @@ function apply(ctx, raw) {
   const current = () => live === void 0 ? constant : readConfig(live);
   assertBaseURL(current().baseURL);
   const settingsNs = ctx.fiber?.entry?.options.id ?? name;
-  let directory;
-  let directoryError;
-  let directoryRetired = false;
-  const directoryEntry = (error) => ({
-    provider: PROVIDER_ID,
-    displayName: DISPLAY_NAME,
-    settingsNs,
-    // This plugin's profile is the entry's whole `config:` mapping — the
-    // bundled `cordis.patch.yml` inserts `id: dshopencodego` with the route's
-    // fields directly under `config`, and `src/config.ts` owns exactly those
-    // fields — so there is no path from the section root to a nested profile.
-    settingsPath: [],
-    defaultBaseURL: DEFAULT_BASE_URL,
-    ...error === void 0 ? {} : { error }
-  });
-  const publishDirectory = (error) => {
-    if (directoryRetired || directory !== void 0 && error === directoryError) return;
-    directoryError = error;
-    const entry = directoryEntry(error);
-    try {
-      if (directory === void 0) directory = ctx.llm.registerConfigurableProviders([entry]);
-      else directory.replace([entry]);
-    } catch (failure) {
-      directoryRetired = true;
-      ctx.logger.error(
-        `dshopencodego: could not publish the "${PROVIDER_ID}" configurable-provider entry; the Models page will not offer this route's model discovery (${String(failure)})`
-      );
-    }
-  };
-  publishDirectory(void 0);
   const resolveApiKey = async () => {
     const ref = current().apiKeyEnv;
     const credentials = ctx.get("credentials");
@@ -45948,7 +45918,6 @@ function apply(ctx, raw) {
         ctx.logger.info("dshopencodego: disabled by configuration; the route and its models are withdrawn");
       }
     }
-    publishDirectory(enabled && !credentialConfigured ? `the route is withheld until ${current().apiKeyEnv} is stored through the credentials service` : void 0);
   };
   const syncRoute = () => {
     try {
@@ -45990,8 +45959,6 @@ function apply(ctx, raw) {
   ctx.effect(() => () => {
     registration?.();
     undiscover();
-    directory?.();
-    directoryRetired = true;
   });
   ctx.on("internal/config", function(_raw, next) {
     const value = next();

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@dan-ai-studio/dshopencodego",
-  "version": "0.1.44",
+  "version": "0.1.46",
   "description": "OpenCode Go provider for DeepSeek Harness: live gateway catalog, per-conversation session header, usage",
   "type": "module",
   "license": "MIT",