@d19n/youfibre-odin-sdk 1.0.57 → 1.0.58

package/dist/entities-v2/BlockageA55.d.ts

@@ -7,12 +7,20 @@ import { WorkOrderProperties } from './WorkOrder';
 export declare enum BlockageA55EntityTypes {
     OUTCOME_FORM = "OUTCOME_FORM"
 }
-export declare enum BlockageA55PointBLocation {
+export declare enum BlockageA55BlockageLocation {
+    PRIVATE_LAND = "PRIVATE_LAND",
+    PUBLIC_LAND = "PUBLIC_LAND"
+}
+export declare enum BlockageA55SurfaceType {
+    HARD_TARMAC_PAVING = "HARD",
+    SOFT_GRASS_SOIL = "SOFT"
+}
+export declare enum BlockageA55PointALocation {
     CHAMBER = "CHAMBER",
     CUSTOMER_PROPERTY = "CUSTOMER_PROPERTY",
     POLE = "POLE"
 }
-export declare enum BlockageA55ChamberTypePointB {
+export declare enum BlockageA55ChamberTypePointA {
     CW1_C_W_MANHOLE = "CW1",
     DUCT_MOUTH_AT_PROPERTY = "DUCT_MOUTH_AT_PROPERTY",
     HOLLOW_POLE = "HOLLOW_POLE",
@@ -25,24 +33,12 @@ export declare enum BlockageA55ChamberTypePointB {
     LOCKED_CHAMBER = "LOCKED_CHAMBER",
     M_H = "M/H"
 }
-export declare enum BlockageA55SecondBlockgageSurfaceType {
-    HARD_TARMAC_PAVING = "HARD",
-    SOFT_GRASS_SOIL = "SOFT"
-}
-export declare enum BlockageA55BlockageLocation {
-    PRIVATE_LAND = "PRIVATE_LAND",
-    PUBLIC_LAND = "PUBLIC_LAND"
-}
-export declare enum BlockageA55SurfaceType {
-    HARD_TARMAC_PAVING = "HARD",
-    SOFT_GRASS_SOIL = "SOFT"
-}
-export declare enum BlockageA55PointALocation {
+export declare enum BlockageA55PointBLocation {
     CHAMBER = "CHAMBER",
     CUSTOMER_PROPERTY = "CUSTOMER_PROPERTY",
     POLE = "POLE"
 }
-export declare enum BlockageA55ChamberTypePointA {
+export declare enum BlockageA55ChamberTypePointB {
     CW1_C_W_MANHOLE = "CW1",
     DUCT_MOUTH_AT_PROPERTY = "DUCT_MOUTH_AT_PROPERTY",
     HOLLOW_POLE = "HOLLOW_POLE",
@@ -71,24 +67,23 @@ export declare enum BlockageA55SecondBlockageLocation {
     PRIVATE_LAND = "PRIVATE_LAND",
     PUBLIC_LAND = "PUBLIC_LAND"
 }
+export declare enum BlockageA55SecondBlockgageSurfaceType {
+    HARD_TARMAC_PAVING = "HARD",
+    SOFT_GRASS_SOIL = "SOFT"
+}
 export declare enum BlockageA55PermissionsRequired {
     NO = "NO",
     YES = "YES"
 }
 export declare enum BlockageA55PropertyKeys {
-    EngineerName = "EngineerName",
     Overview = "Overview",
     DateCreated = "DateCreated",
     ExchangeName = "ExchangeName",
-    PointBLocation = "PointBLocation",
-    ChamberTypePointB = "ChamberTypePointB",
-    SecondBlockgageSurfaceType = "SecondBlockgageSurfaceType",
-    PointBImageSurrounding = "PointBImageSurrounding",
-    PointBImageInternal = "PointBImageInternal",
-    Udprn = "UDPRN",
+    EngineerName = "EngineerName",
     WorkOrderNumber = "WorkOrderNumber",
     FullAddress = "FullAddress",
     PianoiNumber = "PIANOINumber",
+    Udprn = "UDPRN",
     BlockageDetails = "BlockageDetails",
     BlockageLocation = "BlockageLocation",
     SurfaceType = "SurfaceType",
@@ -97,12 +92,16 @@ export declare enum BlockageA55PropertyKeys {
     DuctId = "DuctID",
     PointADetails = "PointADetails",
     PointALocation = "PointALocation",
+    ChamberTypePointA = "ChamberTypePointA",
     PointAImageSurrounding = "PointAImageSurrounding",
     PointAImageInternal = "PointAImageInternal",
     PointAImageRod = "PointAImageRod",
     PointAClosestAddress = "PointAClosestAddress",
     PointBDetails = "PointBDetails",
-    ChamberTypePointA = "ChamberTypePointA",
+    PointBLocation = "PointBLocation",
+    ChamberTypePointB = "ChamberTypePointB",
+    PointBImageSurrounding = "PointBImageSurrounding",
+    PointBImageInternal = "PointBImageInternal",
     PointBImageRod = "PointBImageRod",
     PointBClosestAddress = "PointBClosestAddress",
     FurtherDetails = "FurtherDetails",
@@ -110,31 +109,27 @@ export declare enum BlockageA55PropertyKeys {
     MinimumFootwayDistanceMaintained = "MinimumFootwayDistanceMaintained",
     CarriagewayIncursionRequired = "CarriagewayIncursionRequired",
     NetomniaOdinImageDuctSection = "NetomniaOdinImageDuctSection",
-    SecondBlockageClosestAddress = "SecondBlockageClosestAddress",
+    AddXToTheImage = "AddXToTheImage",
     AnyFurtherBlockages = "AnyFurtherBlockages",
     SecondBlockageLocation = "SecondBlockageLocation",
+    SecondBlockgageSurfaceType = "SecondBlockgageSurfaceType",
+    SecondBlockageClosestAddress = "SecondBlockageClosestAddress",
     SecondBlockageImageXMarked = "SecondBlockageImageXMarked",
     CustomerInformation = "CustomerInformation",
     PermissionsRequired = "PermissionsRequired",
     PtdCopy = "PTDCopy",
-    AddXToTheImage = "AddXToTheImage",
     TotalDuctLength = "TotalDuctLength",
     SplitMeasurement = "SplitMeasurement"
 }
 export interface BlockageA55Properties {
-    EngineerName: string;
     Overview?: string;
     DateCreated?: Date;
     ExchangeName: string;
-    PointBLocation: BlockageA55PointBLocation;
-    ChamberTypePointB?: BlockageA55ChamberTypePointB;
-    SecondBlockgageSurfaceType?: BlockageA55SecondBlockgageSurfaceType;
-    PointBImageSurrounding: string;
-    PointBImageInternal: string;
-    Udprn?: string;
+    EngineerName: string;
     WorkOrderNumber: string;
     FullAddress?: string;
     PianoiNumber?: string;
+    Udprn?: string;
     BlockageDetails?: string;
     BlockageLocation: BlockageA55BlockageLocation;
     SurfaceType: BlockageA55SurfaceType;
@@ -143,12 +138,16 @@ export interface BlockageA55Properties {
     DuctId?: string;
     PointADetails?: string;
     PointALocation: BlockageA55PointALocation;
+    ChamberTypePointA?: BlockageA55ChamberTypePointA;
     PointAImageSurrounding: string;
     PointAImageInternal: string;
     PointAImageRod: string;
     PointAClosestAddress?: string;
     PointBDetails?: string;
-    ChamberTypePointA?: BlockageA55ChamberTypePointA;
+    PointBLocation: BlockageA55PointBLocation;
+    ChamberTypePointB?: BlockageA55ChamberTypePointB;
+    PointBImageSurrounding: string;
+    PointBImageInternal: string;
     PointBImageRod: string;
     PointBClosestAddress?: string;
     FurtherDetails?: string;
@@ -156,14 +155,15 @@ export interface BlockageA55Properties {
     MinimumFootwayDistanceMaintained?: BlockageA55MinimumFootwayDistanceMaintained;
     CarriagewayIncursionRequired?: BlockageA55CarriagewayIncursionRequired;
     NetomniaOdinImageDuctSection?: string;
-    SecondBlockageClosestAddress?: string;
+    AddXToTheImage?: string;
     AnyFurtherBlockages: BlockageA55AnyFurtherBlockages;
     SecondBlockageLocation?: BlockageA55SecondBlockageLocation;
+    SecondBlockgageSurfaceType?: BlockageA55SecondBlockgageSurfaceType;
+    SecondBlockageClosestAddress?: string;
     SecondBlockageImageXMarked?: string;
     CustomerInformation?: string;
     PermissionsRequired: BlockageA55PermissionsRequired;
     PtdCopy: string;
-    AddXToTheImage?: string;
     TotalDuctLength?: string;
     SplitMeasurement?: string;
 }

package/dist/entities-v2/BlockageA55.js

@@ -1,36 +1,11 @@
 "use strict";
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.UpdateBlockageA55Dto = exports.CreateBlockageA55Dto = exports.BlockageA55PropertyKeys = exports.BlockageA55PermissionsRequired = exports.BlockageA55SecondBlockageLocation = exports.BlockageA55AnyFurtherBlockages = exports.BlockageA55CarriagewayIncursionRequired = exports.BlockageA55MinimumFootwayDistanceMaintained = exports.BlockageA55ChamberTypePointA = exports.BlockageA55PointALocation = exports.BlockageA55SurfaceType = exports.BlockageA55BlockageLocation = exports.BlockageA55SecondBlockgageSurfaceType = exports.BlockageA55ChamberTypePointB = exports.BlockageA55PointBLocation = exports.BlockageA55EntityTypes = void 0;
+exports.UpdateBlockageA55Dto = exports.CreateBlockageA55Dto = exports.BlockageA55PropertyKeys = exports.BlockageA55PermissionsRequired = exports.BlockageA55SecondBlockgageSurfaceType = exports.BlockageA55SecondBlockageLocation = exports.BlockageA55AnyFurtherBlockages = exports.BlockageA55CarriagewayIncursionRequired = exports.BlockageA55MinimumFootwayDistanceMaintained = exports.BlockageA55ChamberTypePointB = exports.BlockageA55PointBLocation = exports.BlockageA55ChamberTypePointA = exports.BlockageA55PointALocation = exports.BlockageA55SurfaceType = exports.BlockageA55BlockageLocation = exports.BlockageA55EntityTypes = void 0;
 const odin_dtos_1 = require("@d19n/odin-types/dist/dtos/odin.dtos");
 var BlockageA55EntityTypes;
 (function (BlockageA55EntityTypes) {
     BlockageA55EntityTypes["OUTCOME_FORM"] = "OUTCOME_FORM";
 })(BlockageA55EntityTypes || (exports.BlockageA55EntityTypes = BlockageA55EntityTypes = {}));
-var BlockageA55PointBLocation;
-(function (BlockageA55PointBLocation) {
-    BlockageA55PointBLocation["CHAMBER"] = "CHAMBER";
-    BlockageA55PointBLocation["CUSTOMER_PROPERTY"] = "CUSTOMER_PROPERTY";
-    BlockageA55PointBLocation["POLE"] = "POLE";
-})(BlockageA55PointBLocation || (exports.BlockageA55PointBLocation = BlockageA55PointBLocation = {}));
-var BlockageA55ChamberTypePointB;
-(function (BlockageA55ChamberTypePointB) {
-    BlockageA55ChamberTypePointB["CW1_C_W_MANHOLE"] = "CW1";
-    BlockageA55ChamberTypePointB["DUCT_MOUTH_AT_PROPERTY"] = "DUCT_MOUTH_AT_PROPERTY";
-    BlockageA55ChamberTypePointB["HOLLOW_POLE"] = "HOLLOW_POLE";
-    BlockageA55ChamberTypePointB["JRC12_C_W_2_LIDS"] = "JRC12";
-    BlockageA55ChamberTypePointB["JRC14_C_W_3_LIDS"] = "JRC14";
-    BlockageA55ChamberTypePointB["JUF10"] = "JUF10";
-    BlockageA55ChamberTypePointB["JUF2"] = "JUF2";
-    BlockageA55ChamberTypePointB["JUF4"] = "JUF4";
-    BlockageA55ChamberTypePointB["JUF6"] = "JUF6";
-    BlockageA55ChamberTypePointB["LOCKED_CHAMBER"] = "LOCKED_CHAMBER";
-    BlockageA55ChamberTypePointB["M_H"] = "M/H";
-})(BlockageA55ChamberTypePointB || (exports.BlockageA55ChamberTypePointB = BlockageA55ChamberTypePointB = {}));
-var BlockageA55SecondBlockgageSurfaceType;
-(function (BlockageA55SecondBlockgageSurfaceType) {
-    BlockageA55SecondBlockgageSurfaceType["HARD_TARMAC_PAVING"] = "HARD";
-    BlockageA55SecondBlockgageSurfaceType["SOFT_GRASS_SOIL"] = "SOFT";
-})(BlockageA55SecondBlockgageSurfaceType || (exports.BlockageA55SecondBlockgageSurfaceType = BlockageA55SecondBlockgageSurfaceType = {}));
 var BlockageA55BlockageLocation;
 (function (BlockageA55BlockageLocation) {
     BlockageA55BlockageLocation["PRIVATE_LAND"] = "PRIVATE_LAND";
@@ -61,6 +36,26 @@ var BlockageA55ChamberTypePointA;
     BlockageA55ChamberTypePointA["LOCKED_CHAMBER"] = "LOCKED_CHAMBER";
     BlockageA55ChamberTypePointA["M_H"] = "M/H";
 })(BlockageA55ChamberTypePointA || (exports.BlockageA55ChamberTypePointA = BlockageA55ChamberTypePointA = {}));
+var BlockageA55PointBLocation;
+(function (BlockageA55PointBLocation) {
+    BlockageA55PointBLocation["CHAMBER"] = "CHAMBER";
+    BlockageA55PointBLocation["CUSTOMER_PROPERTY"] = "CUSTOMER_PROPERTY";
+    BlockageA55PointBLocation["POLE"] = "POLE";
+})(BlockageA55PointBLocation || (exports.BlockageA55PointBLocation = BlockageA55PointBLocation = {}));
+var BlockageA55ChamberTypePointB;
+(function (BlockageA55ChamberTypePointB) {
+    BlockageA55ChamberTypePointB["CW1_C_W_MANHOLE"] = "CW1";
+    BlockageA55ChamberTypePointB["DUCT_MOUTH_AT_PROPERTY"] = "DUCT_MOUTH_AT_PROPERTY";
+    BlockageA55ChamberTypePointB["HOLLOW_POLE"] = "HOLLOW_POLE";
+    BlockageA55ChamberTypePointB["JRC12_C_W_2_LIDS"] = "JRC12";
+    BlockageA55ChamberTypePointB["JRC14_C_W_3_LIDS"] = "JRC14";
+    BlockageA55ChamberTypePointB["JUF10"] = "JUF10";
+    BlockageA55ChamberTypePointB["JUF2"] = "JUF2";
+    BlockageA55ChamberTypePointB["JUF4"] = "JUF4";
+    BlockageA55ChamberTypePointB["JUF6"] = "JUF6";
+    BlockageA55ChamberTypePointB["LOCKED_CHAMBER"] = "LOCKED_CHAMBER";
+    BlockageA55ChamberTypePointB["M_H"] = "M/H";
+})(BlockageA55ChamberTypePointB || (exports.BlockageA55ChamberTypePointB = BlockageA55ChamberTypePointB = {}));
 var BlockageA55MinimumFootwayDistanceMaintained;
 (function (BlockageA55MinimumFootwayDistanceMaintained) {
     BlockageA55MinimumFootwayDistanceMaintained["NO"] = "NO";
@@ -81,6 +76,11 @@ var BlockageA55SecondBlockageLocation;
     BlockageA55SecondBlockageLocation["PRIVATE_LAND"] = "PRIVATE_LAND";
     BlockageA55SecondBlockageLocation["PUBLIC_LAND"] = "PUBLIC_LAND";
 })(BlockageA55SecondBlockageLocation || (exports.BlockageA55SecondBlockageLocation = BlockageA55SecondBlockageLocation = {}));
+var BlockageA55SecondBlockgageSurfaceType;
+(function (BlockageA55SecondBlockgageSurfaceType) {
+    BlockageA55SecondBlockgageSurfaceType["HARD_TARMAC_PAVING"] = "HARD";
+    BlockageA55SecondBlockgageSurfaceType["SOFT_GRASS_SOIL"] = "SOFT";
+})(BlockageA55SecondBlockgageSurfaceType || (exports.BlockageA55SecondBlockgageSurfaceType = BlockageA55SecondBlockgageSurfaceType = {}));
 var BlockageA55PermissionsRequired;
 (function (BlockageA55PermissionsRequired) {
     BlockageA55PermissionsRequired["NO"] = "NO";
@@ -88,19 +88,14 @@ var BlockageA55PermissionsRequired;
 })(BlockageA55PermissionsRequired || (exports.BlockageA55PermissionsRequired = BlockageA55PermissionsRequired = {}));
 var BlockageA55PropertyKeys;
 (function (BlockageA55PropertyKeys) {
-    BlockageA55PropertyKeys["EngineerName"] = "EngineerName";
     BlockageA55PropertyKeys["Overview"] = "Overview";
     BlockageA55PropertyKeys["DateCreated"] = "DateCreated";
     BlockageA55PropertyKeys["ExchangeName"] = "ExchangeName";
-    BlockageA55PropertyKeys["PointBLocation"] = "PointBLocation";
-    BlockageA55PropertyKeys["ChamberTypePointB"] = "ChamberTypePointB";
-    BlockageA55PropertyKeys["SecondBlockgageSurfaceType"] = "SecondBlockgageSurfaceType";
-    BlockageA55PropertyKeys["PointBImageSurrounding"] = "PointBImageSurrounding";
-    BlockageA55PropertyKeys["PointBImageInternal"] = "PointBImageInternal";
-    BlockageA55PropertyKeys["Udprn"] = "UDPRN";
+    BlockageA55PropertyKeys["EngineerName"] = "EngineerName";
     BlockageA55PropertyKeys["WorkOrderNumber"] = "WorkOrderNumber";
     BlockageA55PropertyKeys["FullAddress"] = "FullAddress";
     BlockageA55PropertyKeys["PianoiNumber"] = "PIANOINumber";
+    BlockageA55PropertyKeys["Udprn"] = "UDPRN";
     BlockageA55PropertyKeys["BlockageDetails"] = "BlockageDetails";
     BlockageA55PropertyKeys["BlockageLocation"] = "BlockageLocation";
     BlockageA55PropertyKeys["SurfaceType"] = "SurfaceType";
@@ -109,12 +104,16 @@ var BlockageA55PropertyKeys;
     BlockageA55PropertyKeys["DuctId"] = "DuctID";
     BlockageA55PropertyKeys["PointADetails"] = "PointADetails";
     BlockageA55PropertyKeys["PointALocation"] = "PointALocation";
+    BlockageA55PropertyKeys["ChamberTypePointA"] = "ChamberTypePointA";
     BlockageA55PropertyKeys["PointAImageSurrounding"] = "PointAImageSurrounding";
     BlockageA55PropertyKeys["PointAImageInternal"] = "PointAImageInternal";
     BlockageA55PropertyKeys["PointAImageRod"] = "PointAImageRod";
     BlockageA55PropertyKeys["PointAClosestAddress"] = "PointAClosestAddress";
     BlockageA55PropertyKeys["PointBDetails"] = "PointBDetails";
-    BlockageA55PropertyKeys["ChamberTypePointA"] = "ChamberTypePointA";
+    BlockageA55PropertyKeys["PointBLocation"] = "PointBLocation";
+    BlockageA55PropertyKeys["ChamberTypePointB"] = "ChamberTypePointB";
+    BlockageA55PropertyKeys["PointBImageSurrounding"] = "PointBImageSurrounding";
+    BlockageA55PropertyKeys["PointBImageInternal"] = "PointBImageInternal";
     BlockageA55PropertyKeys["PointBImageRod"] = "PointBImageRod";
     BlockageA55PropertyKeys["PointBClosestAddress"] = "PointBClosestAddress";
     BlockageA55PropertyKeys["FurtherDetails"] = "FurtherDetails";
@@ -122,14 +121,15 @@ var BlockageA55PropertyKeys;
     BlockageA55PropertyKeys["MinimumFootwayDistanceMaintained"] = "MinimumFootwayDistanceMaintained";
     BlockageA55PropertyKeys["CarriagewayIncursionRequired"] = "CarriagewayIncursionRequired";
     BlockageA55PropertyKeys["NetomniaOdinImageDuctSection"] = "NetomniaOdinImageDuctSection";
-    BlockageA55PropertyKeys["SecondBlockageClosestAddress"] = "SecondBlockageClosestAddress";
+    BlockageA55PropertyKeys["AddXToTheImage"] = "AddXToTheImage";
     BlockageA55PropertyKeys["AnyFurtherBlockages"] = "AnyFurtherBlockages";
     BlockageA55PropertyKeys["SecondBlockageLocation"] = "SecondBlockageLocation";
+    BlockageA55PropertyKeys["SecondBlockgageSurfaceType"] = "SecondBlockgageSurfaceType";
+    BlockageA55PropertyKeys["SecondBlockageClosestAddress"] = "SecondBlockageClosestAddress";
     BlockageA55PropertyKeys["SecondBlockageImageXMarked"] = "SecondBlockageImageXMarked";
     BlockageA55PropertyKeys["CustomerInformation"] = "CustomerInformation";
     BlockageA55PropertyKeys["PermissionsRequired"] = "PermissionsRequired";
     BlockageA55PropertyKeys["PtdCopy"] = "PTDCopy";
-    BlockageA55PropertyKeys["AddXToTheImage"] = "AddXToTheImage";
     BlockageA55PropertyKeys["TotalDuctLength"] = "TotalDuctLength";
     BlockageA55PropertyKeys["SplitMeasurement"] = "SplitMeasurement";
 })(BlockageA55PropertyKeys || (exports.BlockageA55PropertyKeys = BlockageA55PropertyKeys = {}));

package/dist/entities-v2/InternalInstallAudit.d.ts

@@ -29,6 +29,10 @@ export declare enum InternalInstallAuditYouMeshInstalled {
     NO_YOU_MESH_ON_ACCOUNT = "NO_YOUMESH",
     YES = "YES"
 }
+export declare enum InternalInstallAuditSpeedTestPriorInstallation {
+    FALSE = "FALSE",
+    TRUE = "TRUE"
+}
 export declare enum InternalInstallAuditYouMeshBenefit {
     NO = "NO",
     YES = "YES"
@@ -41,10 +45,6 @@ export declare enum InternalInstallAuditSupportConnectingDevice {
     NO = "NO",
     YES = "YES"
 }
-export declare enum InternalInstallAuditSpeedTestPriorInstallation {
-    FALSE = "FALSE",
-    TRUE = "TRUE"
-}
 export declare enum InternalInstallAuditTalkedWithCustomerWiFiSpeedHardwireSpeed {
     FALSE = "FALSE",
     TRUE = "TRUE"
@@ -74,9 +74,9 @@ export declare enum InternalInstallAuditAgreedToRouting {
     TRUE = "TRUE"
 }
 export declare enum InternalInstallAuditPropertyKeys {
-    OutsidePicture = "OutsidePicture",
     ExistingOntPicture = "ExistingONTPicture",
     ExistingRouterPicture = "ExistingRouterPicture",
+    OutsidePicture = "OutsidePicture",
     NumberOfRooms = "NumberOfRooms",
     Alert1 = "Alert1",
     PreviousWiFiResultsNextToRouter = "PreviousWiFiResultsNextToRouter",
@@ -102,15 +102,15 @@ export declare enum InternalInstallAuditPropertyKeys {
     WiFiSpeedResultNextToRouter = "WiFiSpeedResultNextToRouter",
     WiFiSpeedResultsFurthestPoint = "WiFiSpeedResultsFurthestPoint",
     YouMeshInstalled = "YouMeshInstalled",
-    YouMeshBenefit = "YouMeshBenefit",
+    SpeedTestPriorInstallation = "SpeedTestPriorInstallation",
     YouMeshBenefitReason = "YouMeshBenefitReason",
+    YouMeshBenefit = "YouMeshBenefit",
     YouMeshBenefitDiscussed = "YouMeshBenefitDiscussed",
     Alert2 = "Alert2",
     SupportConnectingDevice = "SupportConnectingDevice",
     WhatDevicesConnected = "WhatDevicesConnected",
     SpeedTestEvidendeDevice = "SpeedTestEvidendeDevice",
     Alert3 = "Alert3",
-    SpeedTestPriorInstallation = "SpeedTestPriorInstallation",
     TalkedWithCustomerWiFiSpeedHardwireSpeed = "TalkedWithCustomerWiFiSpeedHardwireSpeed",
     SpeedsBetter = "SpeedsBetter",
     CustomerInformed = "CustomerInformed",
@@ -123,9 +123,9 @@ export declare enum InternalInstallAuditPropertyKeys {
     EngineerSignature = "EngineerSignature"
 }
 export interface InternalInstallAuditProperties {
-    OutsidePicture?: string;
     ExistingOntPicture?: string;
     ExistingRouterPicture?: string;
+    OutsidePicture?: string;
     NumberOfRooms?: number;
     Alert1?: string;
     PreviousWiFiResultsNextToRouter?: string;
@@ -151,15 +151,15 @@ export interface InternalInstallAuditProperties {
     WiFiSpeedResultNextToRouter?: string;
     WiFiSpeedResultsFurthestPoint?: string;
     YouMeshInstalled?: InternalInstallAuditYouMeshInstalled;
-    YouMeshBenefit?: InternalInstallAuditYouMeshBenefit;
+    SpeedTestPriorInstallation?: InternalInstallAuditSpeedTestPriorInstallation;
     YouMeshBenefitReason?: string;
+    YouMeshBenefit?: InternalInstallAuditYouMeshBenefit;
     YouMeshBenefitDiscussed?: InternalInstallAuditYouMeshBenefitDiscussed;
     Alert2?: string;
     SupportConnectingDevice?: InternalInstallAuditSupportConnectingDevice;
     WhatDevicesConnected?: string;
     SpeedTestEvidendeDevice?: string;
     Alert3?: string;
-    SpeedTestPriorInstallation?: InternalInstallAuditSpeedTestPriorInstallation;
     TalkedWithCustomerWiFiSpeedHardwireSpeed?: InternalInstallAuditTalkedWithCustomerWiFiSpeedHardwireSpeed;
     SpeedsBetter?: InternalInstallAuditSpeedsBetter;
     CustomerInformed?: InternalInstallAuditCustomerInformed;

package/dist/entities-v2/InternalInstallAudit.js

@@ -1,6 +1,6 @@
 "use strict";
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.UpdateInternalInstallAuditDto = exports.CreateInternalInstallAuditDto = exports.InternalInstallAuditPropertyKeys = exports.InternalInstallAuditAgreedToRouting = exports.InternalInstallAuditNetworkNameAndPasswordGiven = exports.InternalInstallAuditNewSetupEquivalentOrBetter = exports.InternalInstallAuditHappyWithWiFiCoverage = exports.InternalInstallAuditCustomerInformed = exports.InternalInstallAuditSpeedsBetter = exports.InternalInstallAuditTalkedWithCustomerWiFiSpeedHardwireSpeed = exports.InternalInstallAuditSpeedTestPriorInstallation = exports.InternalInstallAuditSupportConnectingDevice = exports.InternalInstallAuditYouMeshBenefitDiscussed = exports.InternalInstallAuditYouMeshBenefit = exports.InternalInstallAuditYouMeshInstalled = exports.InternalInstallAuditRouterInstallSameLocation = exports.InternalInstallAuditRouterLocationDuscussed = exports.InternalInstallAuditONTInstallSameLocation = exports.InternalInstallAuditONTLocationDuscussed = exports.InternalInstallAuditEntityTypes = void 0;
+exports.UpdateInternalInstallAuditDto = exports.CreateInternalInstallAuditDto = exports.InternalInstallAuditPropertyKeys = exports.InternalInstallAuditAgreedToRouting = exports.InternalInstallAuditNetworkNameAndPasswordGiven = exports.InternalInstallAuditNewSetupEquivalentOrBetter = exports.InternalInstallAuditHappyWithWiFiCoverage = exports.InternalInstallAuditCustomerInformed = exports.InternalInstallAuditSpeedsBetter = exports.InternalInstallAuditTalkedWithCustomerWiFiSpeedHardwireSpeed = exports.InternalInstallAuditSupportConnectingDevice = exports.InternalInstallAuditYouMeshBenefitDiscussed = exports.InternalInstallAuditYouMeshBenefit = exports.InternalInstallAuditSpeedTestPriorInstallation = exports.InternalInstallAuditYouMeshInstalled = exports.InternalInstallAuditRouterInstallSameLocation = exports.InternalInstallAuditRouterLocationDuscussed = exports.InternalInstallAuditONTInstallSameLocation = exports.InternalInstallAuditONTLocationDuscussed = exports.InternalInstallAuditEntityTypes = void 0;
 const odin_dtos_1 = require("@d19n/odin-types/dist/dtos/odin.dtos");
 var InternalInstallAuditEntityTypes;
 (function (InternalInstallAuditEntityTypes) {
@@ -34,6 +34,11 @@ var InternalInstallAuditYouMeshInstalled;
     InternalInstallAuditYouMeshInstalled["NO_YOU_MESH_ON_ACCOUNT"] = "NO_YOUMESH";
     InternalInstallAuditYouMeshInstalled["YES"] = "YES";
 })(InternalInstallAuditYouMeshInstalled || (exports.InternalInstallAuditYouMeshInstalled = InternalInstallAuditYouMeshInstalled = {}));
+var InternalInstallAuditSpeedTestPriorInstallation;
+(function (InternalInstallAuditSpeedTestPriorInstallation) {
+    InternalInstallAuditSpeedTestPriorInstallation["FALSE"] = "FALSE";
+    InternalInstallAuditSpeedTestPriorInstallation["TRUE"] = "TRUE";
+})(InternalInstallAuditSpeedTestPriorInstallation || (exports.InternalInstallAuditSpeedTestPriorInstallation = InternalInstallAuditSpeedTestPriorInstallation = {}));
 var InternalInstallAuditYouMeshBenefit;
 (function (InternalInstallAuditYouMeshBenefit) {
     InternalInstallAuditYouMeshBenefit["NO"] = "NO";
@@ -49,11 +54,6 @@ var InternalInstallAuditSupportConnectingDevice;
     InternalInstallAuditSupportConnectingDevice["NO"] = "NO";
     InternalInstallAuditSupportConnectingDevice["YES"] = "YES";
 })(InternalInstallAuditSupportConnectingDevice || (exports.InternalInstallAuditSupportConnectingDevice = InternalInstallAuditSupportConnectingDevice = {}));
-var InternalInstallAuditSpeedTestPriorInstallation;
-(function (InternalInstallAuditSpeedTestPriorInstallation) {
-    InternalInstallAuditSpeedTestPriorInstallation["FALSE"] = "FALSE";
-    InternalInstallAuditSpeedTestPriorInstallation["TRUE"] = "TRUE";
-})(InternalInstallAuditSpeedTestPriorInstallation || (exports.InternalInstallAuditSpeedTestPriorInstallation = InternalInstallAuditSpeedTestPriorInstallation = {}));
 var InternalInstallAuditTalkedWithCustomerWiFiSpeedHardwireSpeed;
 (function (InternalInstallAuditTalkedWithCustomerWiFiSpeedHardwireSpeed) {
     InternalInstallAuditTalkedWithCustomerWiFiSpeedHardwireSpeed["FALSE"] = "FALSE";
@@ -91,9 +91,9 @@ var InternalInstallAuditAgreedToRouting;
 })(InternalInstallAuditAgreedToRouting || (exports.InternalInstallAuditAgreedToRouting = InternalInstallAuditAgreedToRouting = {}));
 var InternalInstallAuditPropertyKeys;
 (function (InternalInstallAuditPropertyKeys) {
-    InternalInstallAuditPropertyKeys["OutsidePicture"] = "OutsidePicture";
     InternalInstallAuditPropertyKeys["ExistingOntPicture"] = "ExistingONTPicture";
     InternalInstallAuditPropertyKeys["ExistingRouterPicture"] = "ExistingRouterPicture";
+    InternalInstallAuditPropertyKeys["OutsidePicture"] = "OutsidePicture";
     InternalInstallAuditPropertyKeys["NumberOfRooms"] = "NumberOfRooms";
     InternalInstallAuditPropertyKeys["Alert1"] = "Alert1";
     InternalInstallAuditPropertyKeys["PreviousWiFiResultsNextToRouter"] = "PreviousWiFiResultsNextToRouter";
@@ -119,15 +119,15 @@ var InternalInstallAuditPropertyKeys;
     InternalInstallAuditPropertyKeys["WiFiSpeedResultNextToRouter"] = "WiFiSpeedResultNextToRouter";
     InternalInstallAuditPropertyKeys["WiFiSpeedResultsFurthestPoint"] = "WiFiSpeedResultsFurthestPoint";
     InternalInstallAuditPropertyKeys["YouMeshInstalled"] = "YouMeshInstalled";
-    InternalInstallAuditPropertyKeys["YouMeshBenefit"] = "YouMeshBenefit";
+    InternalInstallAuditPropertyKeys["SpeedTestPriorInstallation"] = "SpeedTestPriorInstallation";
     InternalInstallAuditPropertyKeys["YouMeshBenefitReason"] = "YouMeshBenefitReason";
+    InternalInstallAuditPropertyKeys["YouMeshBenefit"] = "YouMeshBenefit";
     InternalInstallAuditPropertyKeys["YouMeshBenefitDiscussed"] = "YouMeshBenefitDiscussed";
     InternalInstallAuditPropertyKeys["Alert2"] = "Alert2";
     InternalInstallAuditPropertyKeys["SupportConnectingDevice"] = "SupportConnectingDevice";
     InternalInstallAuditPropertyKeys["WhatDevicesConnected"] = "WhatDevicesConnected";
     InternalInstallAuditPropertyKeys["SpeedTestEvidendeDevice"] = "SpeedTestEvidendeDevice";
     InternalInstallAuditPropertyKeys["Alert3"] = "Alert3";
-    InternalInstallAuditPropertyKeys["SpeedTestPriorInstallation"] = "SpeedTestPriorInstallation";
     InternalInstallAuditPropertyKeys["TalkedWithCustomerWiFiSpeedHardwireSpeed"] = "TalkedWithCustomerWiFiSpeedHardwireSpeed";
     InternalInstallAuditPropertyKeys["SpeedsBetter"] = "SpeedsBetter";
     InternalInstallAuditPropertyKeys["CustomerInformed"] = "CustomerInformed";

package/dist/entities-v2/McPendingEvent.d.ts

@@ -6,6 +6,7 @@ export declare enum McPendingEventEntityTypes {
 }
 export declare enum McPendingEventStatus {
     COMPLETED = "COMPLETED",
+    FAILED = "FAILED",
     PENDING = "PENDING"
 }
 export declare enum McPendingEventPropertyKeys {

package/dist/entities-v2/McPendingEvent.js

@@ -9,6 +9,7 @@ var McPendingEventEntityTypes;
 var McPendingEventStatus;
 (function (McPendingEventStatus) {
     McPendingEventStatus["COMPLETED"] = "COMPLETED";
+    McPendingEventStatus["FAILED"] = "FAILED";
     McPendingEventStatus["PENDING"] = "PENDING";
 })(McPendingEventStatus || (exports.McPendingEventStatus = McPendingEventStatus = {}));
 var McPendingEventPropertyKeys;

package/dist/entities-v2/OntReplacementApproval.d.ts

@@ -50,6 +50,7 @@ export interface OntReplacementApproval {
     };
     properties: OntReplacementApprovalProperties;
     CustomerDeviceOnt: OdinLink<LinkedOdinRecord<CustomerDeviceOntProperties>>;
+    OntReplacementApproval: OdinLink<LinkedOdinRecord<OntReplacementApprovalProperties>>;
     WorkOrder: OdinLink<LinkedOdinRecord<WorkOrderProperties>>;
 }
 export declare class CreateOntReplacementApprovalDto extends OdinRecordCreateDto<OntReplacementApprovalProperties> {

package/dist/entities-v2/OutcomeFormBlockageA55.d.ts

@@ -3,12 +3,20 @@ import { OdinRecordCreateDto, OdinRecordUpdateDto } from '@d19n/odin-types/dist/
 import { UserProperties } from './User';
 import { FileProperties } from './File';
 import { NoteProperties } from './Note';
-export declare enum OutcomeFormBlockageA55PointBLocation {
+export declare enum OutcomeFormBlockageA55BlockageLocation {
+    PRIVATE_LAND = "PRIVATE_LAND",
+    PUBLIC_LAND = "PUBLIC_LAND"
+}
+export declare enum OutcomeFormBlockageA55SurfaceType {
+    HARD_TARMAC_PAVING = "HARD",
+    SOFT_GRASS_SOIL = "SOFT"
+}
+export declare enum OutcomeFormBlockageA55PointALocation {
     CHAMBER = "CHAMBER",
     CUSTOMER_PROPERTY = "CUSTOMER_PROPERTY",
     POLE = "POLE"
 }
-export declare enum OutcomeFormBlockageA55ChamberTypePointB {
+export declare enum OutcomeFormBlockageA55ChamberTypePointA {
     CW1_C_W_MANHOLE = "CW1",
     DUCT_MOUTH_AT_PROPERTY = "DUCT_MOUTH_AT_PROPERTY",
     HOLLOW_POLE = "HOLLOW_POLE",
@@ -21,24 +29,12 @@ export declare enum OutcomeFormBlockageA55ChamberTypePointB {
     LOCKED_CHAMBER = "LOCKED_CHAMBER",
     M_H = "M/H"
 }
-export declare enum OutcomeFormBlockageA55SecondBlockgageSurfaceType {
-    HARD_TARMAC_PAVING = "HARD",
-    SOFT_GRASS_SOIL = "SOFT"
-}
-export declare enum OutcomeFormBlockageA55BlockageLocation {
-    PRIVATE_LAND = "PRIVATE_LAND",
-    PUBLIC_LAND = "PUBLIC_LAND"
-}
-export declare enum OutcomeFormBlockageA55SurfaceType {
-    HARD_TARMAC_PAVING = "HARD",
-    SOFT_GRASS_SOIL = "SOFT"
-}
-export declare enum OutcomeFormBlockageA55PointALocation {
+export declare enum OutcomeFormBlockageA55PointBLocation {
     CHAMBER = "CHAMBER",
     CUSTOMER_PROPERTY = "CUSTOMER_PROPERTY",
     POLE = "POLE"
 }
-export declare enum OutcomeFormBlockageA55ChamberTypePointA {
+export declare enum OutcomeFormBlockageA55ChamberTypePointB {
     CW1_C_W_MANHOLE = "CW1",
     DUCT_MOUTH_AT_PROPERTY = "DUCT_MOUTH_AT_PROPERTY",
     HOLLOW_POLE = "HOLLOW_POLE",
@@ -67,24 +63,23 @@ export declare enum OutcomeFormBlockageA55SecondBlockageLocation {
     PRIVATE_LAND = "PRIVATE_LAND",
     PUBLIC_LAND = "PUBLIC_LAND"
 }
+export declare enum OutcomeFormBlockageA55SecondBlockgageSurfaceType {
+    HARD_TARMAC_PAVING = "HARD",
+    SOFT_GRASS_SOIL = "SOFT"
+}
 export declare enum OutcomeFormBlockageA55PermissionsRequired {
     NO = "NO",
     YES = "YES"
 }
 export declare enum OutcomeFormBlockageA55PropertyKeys {
-    EngineerName = "EngineerName",
     Overview = "Overview",
     DateCreated = "DateCreated",
     ExchangeName = "ExchangeName",
-    PointBLocation = "PointBLocation",
-    ChamberTypePointB = "ChamberTypePointB",
-    SecondBlockgageSurfaceType = "SecondBlockgageSurfaceType",
-    PointBImageSurrounding = "PointBImageSurrounding",
-    PointBImageInternal = "PointBImageInternal",
-    Udprn = "UDPRN",
+    EngineerName = "EngineerName",
     WorkOrderNumber = "WorkOrderNumber",
     FullAddress = "FullAddress",
     PianoiNumber = "PIANOINumber",
+    Udprn = "UDPRN",
     BlockageDetails = "BlockageDetails",
     BlockageLocation = "BlockageLocation",
     SurfaceType = "SurfaceType",
@@ -93,12 +88,16 @@ export declare enum OutcomeFormBlockageA55PropertyKeys {
     DuctId = "DuctID",
     PointADetails = "PointADetails",
     PointALocation = "PointALocation",
+    ChamberTypePointA = "ChamberTypePointA",
     PointAImageSurrounding = "PointAImageSurrounding",
     PointAImageInternal = "PointAImageInternal",
     PointAImageRod = "PointAImageRod",
     PointAClosestAddress = "PointAClosestAddress",
     PointBDetails = "PointBDetails",
-    ChamberTypePointA = "ChamberTypePointA",
+    PointBLocation = "PointBLocation",
+    ChamberTypePointB = "ChamberTypePointB",
+    PointBImageSurrounding = "PointBImageSurrounding",
+    PointBImageInternal = "PointBImageInternal",
     PointBImageRod = "PointBImageRod",
     PointBClosestAddress = "PointBClosestAddress",
     FurtherDetails = "FurtherDetails",
@@ -106,31 +105,27 @@ export declare enum OutcomeFormBlockageA55PropertyKeys {
     MinimumFootwayDistanceMaintained = "MinimumFootwayDistanceMaintained",
     CarriagewayIncursionRequired = "CarriagewayIncursionRequired",
     NetomniaOdinImageDuctSection = "NetomniaOdinImageDuctSection",
-    SecondBlockageClosestAddress = "SecondBlockageClosestAddress",
+    AddXToTheImage = "AddXToTheImage",
     AnyFurtherBlockages = "AnyFurtherBlockages",
     SecondBlockageLocation = "SecondBlockageLocation",
+    SecondBlockgageSurfaceType = "SecondBlockgageSurfaceType",
+    SecondBlockageClosestAddress = "SecondBlockageClosestAddress",
     SecondBlockageImageXMarked = "SecondBlockageImageXMarked",
     CustomerInformation = "CustomerInformation",
     PermissionsRequired = "PermissionsRequired",
     PtdCopy = "PTDCopy",
-    AddXToTheImage = "AddXToTheImage",
     TotalDuctLength = "TotalDuctLength",
     SplitMeasurement = "SplitMeasurement"
 }
 export interface OutcomeFormBlockageA55Properties {
-    EngineerName: string;
     Overview?: string;
     DateCreated?: Date;
     ExchangeName: string;
-    PointBLocation: OutcomeFormBlockageA55PointBLocation;
-    ChamberTypePointB?: OutcomeFormBlockageA55ChamberTypePointB;
-    SecondBlockgageSurfaceType?: OutcomeFormBlockageA55SecondBlockgageSurfaceType;
-    PointBImageSurrounding: string;
-    PointBImageInternal: string;
-    Udprn?: string;
+    EngineerName: string;
     WorkOrderNumber: string;
     FullAddress?: string;
     PianoiNumber?: string;
+    Udprn?: string;
     BlockageDetails?: string;
     BlockageLocation: OutcomeFormBlockageA55BlockageLocation;
     SurfaceType: OutcomeFormBlockageA55SurfaceType;
@@ -139,12 +134,16 @@ export interface OutcomeFormBlockageA55Properties {
     DuctId?: string;
     PointADetails?: string;
     PointALocation: OutcomeFormBlockageA55PointALocation;
+    ChamberTypePointA?: OutcomeFormBlockageA55ChamberTypePointA;
     PointAImageSurrounding: string;
     PointAImageInternal: string;
     PointAImageRod: string;
     PointAClosestAddress?: string;
     PointBDetails?: string;
-    ChamberTypePointA?: OutcomeFormBlockageA55ChamberTypePointA;
+    PointBLocation: OutcomeFormBlockageA55PointBLocation;
+    ChamberTypePointB?: OutcomeFormBlockageA55ChamberTypePointB;
+    PointBImageSurrounding: string;
+    PointBImageInternal: string;
     PointBImageRod: string;
     PointBClosestAddress?: string;
     FurtherDetails?: string;
@@ -152,14 +151,15 @@ export interface OutcomeFormBlockageA55Properties {
     MinimumFootwayDistanceMaintained?: OutcomeFormBlockageA55MinimumFootwayDistanceMaintained;
     CarriagewayIncursionRequired?: OutcomeFormBlockageA55CarriagewayIncursionRequired;
     NetomniaOdinImageDuctSection?: string;
-    SecondBlockageClosestAddress?: string;
+    AddXToTheImage?: string;
     AnyFurtherBlockages: OutcomeFormBlockageA55AnyFurtherBlockages;
     SecondBlockageLocation?: OutcomeFormBlockageA55SecondBlockageLocation;
+    SecondBlockgageSurfaceType?: OutcomeFormBlockageA55SecondBlockgageSurfaceType;
+    SecondBlockageClosestAddress?: string;
     SecondBlockageImageXMarked?: string;
     CustomerInformation?: string;
     PermissionsRequired: OutcomeFormBlockageA55PermissionsRequired;
     PtdCopy: string;
-    AddXToTheImage?: string;
     TotalDuctLength?: string;
     SplitMeasurement?: string;
 }