@crossbind/port-openssl-linuxmusl 0.0.0-bootstrap.0 → 2.0.0-beta.63

package/dist/prebuilt/linuxmusl-arm64-mt-release/ssl/openssl.cnf.dist

@@ -0,0 +1,395 @@
+#
+# OpenSSL example configuration file.
+# See doc/man5/config.pod for more info.
+#
+# This is mostly being used for generation of certificate requests,
+# but may be used for auto loading of providers
+
+# Note that you can include other files from the main configuration
+# file using the .include directive.
+#.include filename
+
+# This definition stops the following lines choking if HOME isn't
+# defined.
+HOME			= .
+
+# Use this in order to automatically load providers.
+openssl_conf = openssl_init
+
+# Comment out the next line to ignore configuration errors
+config_diagnostics = 1
+
+# Extra OBJECT IDENTIFIER info:
+# oid_file       = $ENV::HOME/.oid
+oid_section = new_oids
+
+# When present, The `extensions` setting of the default configuration file is
+# used by the `openssl-x509(1)` "mini-CA" as a list of extensions to add to
+# each newly signed certificate.  See the descriptions of the `-extfile` and
+# `-extensions` options for details in the documentation.
+#
+# The below setting arranges for `openssl-x509(1)` to add
+# subjectKeyIdentifier and authorityKeyIdentifier extensions by default.
+#
+extensions = default_skid_akid
+
+[ default_skid_akid ]
+# Always a subjectKeyIdentifier
+subjectKeyIdentifier = hash
+# Only if the certificate is not self-signed, with the issuer+serial only as a
+# fallback if no issuer keyid is available.
+authorityKeyIdentifier = keyid:nonss,issuer:nonss
+
+[ new_oids ]
+# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+# Add a simple OID like this:
+# testoid1=1.2.3.4
+# Or use config file substitution like this:
+# testoid2=${testoid1}.5.6
+
+# Policies used by the TSA examples.
+tsa_policy1 = 1.2.3.4.1
+tsa_policy2 = 1.2.3.4.5.6
+tsa_policy3 = 1.2.3.4.5.7
+
+# For FIPS
+# Optionally include a file that is generated by the OpenSSL fipsinstall
+# application. This file contains configuration data required by the OpenSSL
+# fips provider. It contains a named section e.g. [fips_sect] which is
+# referenced from the [provider_sect] below.
+# Refer to the OpenSSL security policy for more information.
+# .include fipsmodule.cnf
+
+[openssl_init]
+providers = provider_sect
+
+# List of providers to load
+[provider_sect]
+default = default_sect
+# The fips section name should match the section name inside the
+# included fipsmodule.cnf.
+# fips = fips_sect
+
+# If no providers are activated explicitly, the default one is activated implicitly.
+# See man 7 OSSL_PROVIDER-default for more details.
+#
+# If you add a section explicitly activating any other provider(s), you most
+# probably need to explicitly activate the default provider, otherwise it
+# becomes unavailable in openssl.  As a consequence applications depending on
+# OpenSSL may not work correctly which could lead to significant system
+# problems including inability to remotely access the system.
+[default_sect]
+# activate = 1
+
+
+####################################################################
+[ ca ]
+default_ca	= CA_default		# The default ca section
+
+####################################################################
+[ CA_default ]
+
+dir		= ./demoCA		# Where everything is kept
+certs		= $dir/certs		# Where the issued certs are kept
+crl_dir		= $dir/crl		# Where the issued crl are kept
+database	= $dir/index.txt	# database index file.
+#unique_subject	= no			# Set to 'no' to allow creation of
+					# several certs with same subject.
+new_certs_dir	= $dir/newcerts		# default place for new certs.
+
+certificate	= $dir/cacert.pem 	# The CA certificate
+serial		= $dir/serial 		# The current serial number
+crlnumber	= $dir/crlnumber	# the current crl number
+					# must be commented out to leave a V1 CRL
+crl		= $dir/crl.pem 		# The current CRL
+private_key	= $dir/private/cakey.pem # The private key
+
+x509_extensions	= usr_cert		# The extensions to add to the cert
+
+# Comment out the following two lines for the "traditional"
+# (and highly broken) format.
+name_opt 	= ca_default		# Subject Name options
+cert_opt 	= ca_default		# Certificate field options
+
+# Extension copying option: use with caution.
+# copy_extensions = copy
+
+# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
+# so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
+# crl_extensions	= crl_ext
+
+default_days	= 365			# how long to certify for
+default_crl_days= 30			# how long before next CRL
+default_md	= default		# use public key default MD
+preserve	= no			# keep passed DN ordering
+
+# A few difference way of specifying how similar the request should look
+# For type CA, the listed attributes must be the same, and the optional
+# and supplied fields are just that :-)
+policy		= policy_match
+
+# For the CA policy
+[ policy_match ]
+countryName		= match
+stateOrProvinceName	= match
+organizationName	= match
+organizationalUnitName	= optional
+commonName		= supplied
+emailAddress		= optional
+
+# For the 'anything' policy
+# At this point in time, you must list all acceptable 'object'
+# types.
+[ policy_anything ]
+countryName		= optional
+stateOrProvinceName	= optional
+localityName		= optional
+organizationName	= optional
+organizationalUnitName	= optional
+commonName		= supplied
+emailAddress		= optional
+
+####################################################################
+[ req ]
+default_bits		= 2048
+default_keyfile 	= privkey.pem
+distinguished_name	= req_distinguished_name
+attributes		= req_attributes
+x509_extensions	= v3_ca	# The extensions to add to the self signed cert
+
+# Passwords for private keys if not present they will be prompted for
+# input_password = secret
+# output_password = secret
+
+# This sets a mask for permitted string types. There are several options.
+# default: PrintableString, T61String, BMPString.
+# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
+# utf8only: only UTF8Strings (PKIX recommendation after 2004).
+# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
+# MASK:XXXX a literal mask value.
+# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
+string_mask = utf8only
+
+# req_extensions = v3_req # The extensions to add to a certificate request
+
+[ req_distinguished_name ]
+countryName			= Country Name (2 letter code)
+countryName_default		= AU
+countryName_min			= 2
+countryName_max			= 2
+
+stateOrProvinceName		= State or Province Name (full name)
+stateOrProvinceName_default	= Some-State
+
+localityName			= Locality Name (eg, city)
+
+0.organizationName		= Organization Name (eg, company)
+0.organizationName_default	= Internet Widgits Pty Ltd
+
+# we can do this but it is not needed normally :-)
+#1.organizationName		= Second Organization Name (eg, company)
+#1.organizationName_default	= World Wide Web Pty Ltd
+
+organizationalUnitName		= Organizational Unit Name (eg, section)
+#organizationalUnitName_default	=
+
+commonName			= Common Name (e.g. server FQDN or YOUR name)
+commonName_max			= 64
+
+emailAddress			= Email Address
+emailAddress_max		= 64
+
+# SET-ex3			= SET extension number 3
+
+[ req_attributes ]
+challengePassword		= A challenge password
+challengePassword_min		= 4
+challengePassword_max		= 20
+
+unstructuredName		= An optional company name
+
+[ usr_cert ]
+
+# These extensions are added when 'ca' signs a request.
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:nonss,issuer:nonss
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+# This is required for TSA certificates.
+# extendedKeyUsage = critical,timeStamping
+
+[ v3_req ]
+
+# Extensions to add to a certificate request
+
+basicConstraints = CA:FALSE
+keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+[ v3_ca ]
+# Extensions for a typical CA
+
+# PKIX recommendation.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:nonss,issuer:nonss
+
+basicConstraints = critical,CA:true
+
+# Key usage: this is typical for a CA certificate. However since it will
+# prevent it being used as an test self-signed certificate it is best
+# left out by default.
+# keyUsage = cRLSign, keyCertSign
+
+# Include email address in subject alt name: another PKIX recommendation
+# subjectAltName=email:copy
+# Copy issuer details
+# issuerAltName=issuer:copy
+
+# DER hex encoding of an extension: beware experts only!
+# obj=DER:02:03
+# Where 'obj' is a standard or added object
+# You can even override a supported extension:
+# basicConstraints= critical, DER:30:03:01:01:FF
+
+[ crl_ext ]
+
+# CRL extensions.
+# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
+
+# issuerAltName=issuer:copy
+authorityKeyIdentifier=keyid:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+# The issuer of a proxy certificate should have SKID.
+authorityKeyIdentifier=keyid:always
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
+
+####################################################################
+[ tsa ]
+
+default_tsa = tsa_config1	# the default TSA section
+
+[ tsa_config1 ]
+
+# These are used by the TSA reply generation only.
+dir		= ./demoCA		# TSA root directory
+serial		= $dir/tsaserial	# The current serial number (mandatory)
+signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
+					# (optional)
+certs		= $dir/cacert.pem	# Certificate chain to include in reply
+					# (optional)
+signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
+signer_digest  = sha256			# Signing digest to use. (Optional)
+default_policy	= tsa_policy1		# Policy if request did not specify it
+					# (optional)
+other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
+digests     = sha1, sha256, sha384, sha512  # Acceptable message digests (mandatory)
+accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
+clock_precision_digits  = 0	# number of digits after dot. (optional)
+ordering		= yes	# Is ordering defined for timestamps?
+				# (optional, default: no)
+tsa_name		= yes	# Must the TSA name be included in the reply?
+				# (optional, default: no)
+ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
+				# (optional, default: no)
+ess_cert_id_alg		= sha256	# algorithm to compute certificate
+				# identifier (optional, default: sha256)
+
+[insta] # CMP using Insta Demo CA
+# Message transfer
+server = pki.certificate.fi:8700
+# proxy = # set this as far as needed, e.g., http://192.168.1.1:8080
+# tls_use = 0
+path = pkix/
+
+# Server authentication
+recipient = "/C=FI/O=Insta Demo/CN=Insta Demo CA" # or set srvcert or issuer
+ignore_keyusage = 1 # quirk needed to accept Insta CA cert not including digitalsignature
+unprotected_errors = 1 # quirk needed to accept negative responses possibly not protected
+extracertsout = insta.extracerts.pem
+
+# Client authentication
+ref = 3078 # user identification
+secret = pass:insta # can be used for both client and server side
+
+# Generic message options
+cmd = ir # default operation, can be overridden on cmd line with, e.g., kur
+
+# Certificate enrollment
+subject = "/CN=openssl-cmp-test"
+newkey = insta.priv.pem
+out_trusted = apps/insta.ca.crt # does not include keyUsage digitalSignature
+certout = insta.cert.pem
+
+[pbm] # Password-based protection for Insta CA
+# Server and client authentication
+ref = $insta::ref # 3078
+secret = $insta::secret # pass:insta
+
+[signature] # Signature-based protection for Insta CA
+# Server authentication
+trusted = $insta::out_trusted # apps/insta.ca.crt
+
+# Client authentication
+secret = # disable PBM
+key = $insta::newkey # insta.priv.pem
+cert = $insta::certout # insta.cert.pem
+
+[ir]
+cmd = ir
+
+[cr]
+cmd = cr
+
+[kur]
+# Certificate update
+cmd = kur
+oldcert = $insta::certout # insta.cert.pem
+
+[rr]
+# Certificate revocation
+cmd = rr
+oldcert = $insta::certout # insta.cert.pem

package/dist/prebuilt/linuxmusl-x64-mt-release/crossbind-emccflags.fingerprint

@@ -0,0 +1 @@
+4f53cda18c2baa0c0354bb5f9a3ecbe5ed12ab4d8e11ba873c2f11161202b945

package/dist/prebuilt/linuxmusl-x64-mt-release/crossbind-source.fingerprint

@@ -0,0 +1 @@
+423da230b705c21b9f145768445331c525b4209553c600816f31e815a6dbc582

package/dist/prebuilt/linuxmusl-x64-mt-release/include/openssl/aes.h

@@ -0,0 +1,109 @@
+/*
+ * Copyright 2002-2026 The OpenSSL Project Authors. All Rights Reserved.
+ *
+ * Licensed under the Apache License 2.0 (the "License").  You may not use
+ * this file except in compliance with the License.  You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
+ */
+
+#ifndef OPENSSL_AES_H
+#define OPENSSL_AES_H
+#pragma once
+
+#include <openssl/macros.h>
+#ifndef OPENSSL_NO_DEPRECATED_3_0
+#define HEADER_AES_H
+#endif
+
+#include <openssl/opensslconf.h>
+
+#include <stddef.h>
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define AES_BLOCK_SIZE 16
+
+#ifndef OPENSSL_NO_DEPRECATED_3_0
+
+#define AES_ENCRYPT 1
+#define AES_DECRYPT 0
+
+#define AES_MAXNR 14
+
+/* This should be a hidden type, but EVP requires that the size be known */
+struct aes_key_st {
+#ifdef AES_LONG
+    unsigned long rd_key[4 * (AES_MAXNR + 1)];
+#else
+    unsigned int rd_key[4 * (AES_MAXNR + 1)];
+#endif
+    int rounds;
+};
+typedef struct aes_key_st AES_KEY;
+
+#endif
+#ifndef OPENSSL_NO_DEPRECATED_3_0
+OSSL_DEPRECATEDIN_3_0 const char *AES_options(void);
+OSSL_DEPRECATEDIN_3_0
+int AES_set_encrypt_key(const unsigned char *userKey, int bits,
+    AES_KEY *key);
+OSSL_DEPRECATEDIN_3_0
+int AES_set_decrypt_key(const unsigned char *userKey, int bits,
+    AES_KEY *key);
+OSSL_DEPRECATEDIN_3_0
+void AES_encrypt(const unsigned char *in, unsigned char *out,
+    const AES_KEY *key);
+OSSL_DEPRECATEDIN_3_0
+void AES_decrypt(const unsigned char *in, unsigned char *out,
+    const AES_KEY *key);
+OSSL_DEPRECATEDIN_3_0
+void AES_ecb_encrypt(const unsigned char *in, unsigned char *out,
+    const AES_KEY *key, int enc);
+OSSL_DEPRECATEDIN_3_0
+void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
+    size_t length, const AES_KEY *key,
+    unsigned char *ivec, int enc);
+OSSL_DEPRECATEDIN_3_0
+void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
+    size_t length, const AES_KEY *key,
+    unsigned char *ivec, int *num, int enc);
+OSSL_DEPRECATEDIN_3_0
+void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
+    size_t length, const AES_KEY *key,
+    unsigned char *ivec, int *num, int enc);
+OSSL_DEPRECATEDIN_3_0
+void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
+    size_t length, const AES_KEY *key,
+    unsigned char *ivec, int *num, int enc);
+OSSL_DEPRECATEDIN_3_0
+void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
+    size_t length, const AES_KEY *key,
+    unsigned char *ivec, int *num);
+
+/* NB: the IV is _two_ blocks long */
+OSSL_DEPRECATEDIN_3_0
+void AES_ige_encrypt(const unsigned char *in, unsigned char *out,
+    size_t length, const AES_KEY *key,
+    unsigned char *ivec, int enc);
+/* NB: the IV is _four_ blocks long */
+OSSL_DEPRECATEDIN_3_0
+void AES_bi_ige_encrypt(const unsigned char *in, unsigned char *out,
+    size_t length, const AES_KEY *key, const AES_KEY *key2,
+    const unsigned char *ivec, int enc);
+OSSL_DEPRECATEDIN_3_0
+int AES_wrap_key(AES_KEY *key, const unsigned char *iv,
+    unsigned char *out, const unsigned char *in,
+    unsigned int inlen);
+OSSL_DEPRECATEDIN_3_0
+int AES_unwrap_key(AES_KEY *key, const unsigned char *iv,
+    unsigned char *out, const unsigned char *in,
+    unsigned int inlen);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif