@crossbind/port-curl-ios 2.0.0-beta.50

package/dist/prebuilt/ios-iphoneos-mt-release/include/curl/curl.h

@@ -0,0 +1,3347 @@
+#ifndef CURLINC_CURL_H
+#define CURLINC_CURL_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+/*
+ * If you have libcurl problems, all docs and details are found here:
+ *   https://curl.se/libcurl/
+ */
+
+#ifdef CURL_NO_OLDIES
+#define CURL_STRICTER /* not used since 8.11.0 */
+#endif
+
+/* Compile-time deprecation macros. */
+#if (defined(__GNUC__) &&                                              \
+  ((__GNUC__ > 12) || ((__GNUC__ == 12) && (__GNUC_MINOR__ >= 1))) ||  \
+  (defined(__clang__) && __clang_major__ >= 3) ||                      \
+  defined(__IAR_SYSTEMS_ICC__)) &&                                     \
+  !defined(__INTEL_COMPILER) &&                                        \
+  !defined(CURL_DISABLE_DEPRECATION) && !defined(BUILDING_LIBCURL)
+#define CURL_DEPRECATED(version, message)                       \
+  __attribute__((deprecated("since " # version ". " message)))
+#ifdef __IAR_SYSTEMS_ICC__
+#define CURL_IGNORE_DEPRECATION(statements) \
+      _Pragma("diag_suppress=Pe1444") \
+      statements \
+      _Pragma("diag_default=Pe1444")
+#else
+#define CURL_IGNORE_DEPRECATION(statements) \
+      _Pragma("GCC diagnostic push") \
+      _Pragma("GCC diagnostic ignored \"-Wdeprecated-declarations\"") \
+      statements \
+      _Pragma("GCC diagnostic pop")
+#endif
+#else
+#define CURL_DEPRECATED(version, message)
+#define CURL_IGNORE_DEPRECATION(statements)     statements
+#endif
+
+#include "curlver.h"         /* libcurl version defines */
+#include "system.h"          /* determine things runtime */
+
+#include <stdio.h>
+#include <limits.h>
+
+#if defined(__FreeBSD__) || defined(__MidnightBSD__)
+/* Needed for __FreeBSD_version or __MidnightBSD_version symbol definition */
+#include <sys/param.h>
+#endif
+
+/* The include stuff here below is mainly for time_t! */
+#include <sys/types.h>
+#include <time.h>
+
+#if defined(_WIN32) && !defined(_WIN32_WCE) && !defined(__CYGWIN__)
+#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H) || \
+      defined(__LWIP_OPT_H__) || defined(LWIP_HDR_OPT_H))
+/* The check above prevents the winsock2.h inclusion if winsock.h already was
+   included, since they cannot co-exist without problems */
+#include <winsock2.h>
+#include <ws2tcpip.h>
+#endif
+#endif
+
+/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish
+   libc5-based Linux systems. Only include it on systems that are known to
+   require it! */
+#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \
+    defined(__minix) || defined(__INTEGRITY) || \
+    defined(ANDROID) || defined(__ANDROID__) || defined(__OpenBSD__) || \
+    defined(__CYGWIN__) || defined(AMIGA) || defined(__NuttX__) || \
+   (defined(__FreeBSD_version) && (__FreeBSD_version < 800000)) || \
+   (defined(__MidnightBSD_version) && (__MidnightBSD_version < 100000)) || \
+    defined(__sun__) || defined(__serenity__) || defined(__vxworks__)
+#include <sys/select.h>
+#endif
+
+#ifndef _WIN32
+#include <sys/socket.h>
+#include <sys/time.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef void CURL;
+typedef void CURLSH;
+
+/*
+ * libcurl external API function linkage decorations.
+ */
+
+#ifdef __has_declspec_attribute
+#define CURL_HAS_DECLSPEC_ATTRIBUTE(x) __has_declspec_attribute(x)
+#else
+#define CURL_HAS_DECLSPEC_ATTRIBUTE(x) 0
+#endif
+
+#ifdef CURL_STATICLIB
+#  define CURL_EXTERN
+#elif defined(_WIN32) || \
+     (CURL_HAS_DECLSPEC_ATTRIBUTE(dllexport) && \
+      CURL_HAS_DECLSPEC_ATTRIBUTE(dllimport))
+#  ifdef BUILDING_LIBCURL
+#    define CURL_EXTERN  __declspec(dllexport)
+#  else
+#    define CURL_EXTERN  __declspec(dllimport)
+#  endif
+#elif defined(BUILDING_LIBCURL) && defined(CURL_HIDDEN_SYMBOLS)
+#  define CURL_EXTERN CURL_EXTERN_SYMBOL
+#else
+#  define CURL_EXTERN
+#endif
+
+#ifndef curl_socket_typedef
+/* socket typedef */
+#if defined(_WIN32) && !defined(__LWIP_OPT_H__) && !defined(LWIP_HDR_OPT_H)
+typedef SOCKET curl_socket_t;
+#define CURL_SOCKET_BAD INVALID_SOCKET
+#else
+typedef int curl_socket_t;
+#define CURL_SOCKET_BAD (-1)
+#endif
+#define curl_socket_typedef
+#endif /* curl_socket_typedef */
+
+/* enum for the different supported SSL backends */
+typedef enum {
+  CURLSSLBACKEND_NONE = 0,
+  CURLSSLBACKEND_OPENSSL = 1,
+  CURLSSLBACKEND_GNUTLS = 2,
+  CURLSSLBACKEND_NSS                    CURL_DEPRECATED(8.3.0, "") = 3,
+  CURLSSLBACKEND_OBSOLETE4 = 4,  /* Was QSOSSL. */
+  CURLSSLBACKEND_GSKIT                  CURL_DEPRECATED(8.3.0, "") = 5,
+  CURLSSLBACKEND_POLARSSL               CURL_DEPRECATED(7.69.0, "") = 6,
+  CURLSSLBACKEND_WOLFSSL = 7,
+  CURLSSLBACKEND_SCHANNEL = 8,
+  CURLSSLBACKEND_SECURETRANSPORT        CURL_DEPRECATED(8.15.0, "") = 9,
+  CURLSSLBACKEND_AXTLS                  CURL_DEPRECATED(7.61.0, "") = 10,
+  CURLSSLBACKEND_MBEDTLS = 11,
+  CURLSSLBACKEND_MESALINK               CURL_DEPRECATED(7.82.0, "") = 12,
+  CURLSSLBACKEND_BEARSSL                CURL_DEPRECATED(8.15.0, "") = 13,
+  CURLSSLBACKEND_RUSTLS = 14
+} curl_sslbackend;
+
+/* aliases for library clones and renames */
+#define CURLSSLBACKEND_AWSLC CURLSSLBACKEND_OPENSSL
+#define CURLSSLBACKEND_BORINGSSL CURLSSLBACKEND_OPENSSL
+#define CURLSSLBACKEND_LIBRESSL CURLSSLBACKEND_OPENSSL
+
+/* deprecated names: */
+#define CURLSSLBACKEND_CYASSL CURLSSLBACKEND_WOLFSSL
+#define CURLSSLBACKEND_DARWINSSL CURLSSLBACKEND_SECURETRANSPORT
+
+/* bits for the CURLOPT_FOLLOWLOCATION option */
+#define CURLFOLLOW_ALL       1L /* generic follow redirects */
+
+/* Do not use the custom method in the follow-up request if the HTTP code
+   instructs so (301, 302, 303). */
+#define CURLFOLLOW_OBEYCODE  2L
+
+/* Only use the custom method in the first request, always reset in the next */
+#define CURLFOLLOW_FIRSTONLY 3L
+
+struct curl_httppost {
+  struct curl_httppost *next;       /* next entry in the list */
+  char *name;                       /* pointer to allocated name */
+  long namelength;                  /* length of name length */
+  char *contents;                   /* pointer to allocated data contents */
+  long contentslength;              /* length of contents field, see also
+                                       CURL_HTTPPOST_LARGE */
+  char *buffer;                     /* pointer to allocated buffer contents */
+  long bufferlength;                /* length of buffer field */
+  char *contenttype;                /* Content-Type */
+  struct curl_slist *contentheader; /* list of extra headers for this form */
+  struct curl_httppost *more;       /* if one field name has more than one
+                                       file, this link should link to following
+                                       files */
+  long flags;                       /* as defined below */
+
+/* specified content is a filename */
+#define CURL_HTTPPOST_FILENAME (1 << 0)
+/* specified content is a filename */
+#define CURL_HTTPPOST_READFILE (1 << 1)
+/* name is only stored pointer do not free in formfree */
+#define CURL_HTTPPOST_PTRNAME (1 << 2)
+/* contents is only stored pointer do not free in formfree */
+#define CURL_HTTPPOST_PTRCONTENTS (1 << 3)
+/* upload file from buffer */
+#define CURL_HTTPPOST_BUFFER (1 << 4)
+/* upload file from pointer contents */
+#define CURL_HTTPPOST_PTRBUFFER (1 << 5)
+/* upload file contents by using the regular read callback to get the data and
+   pass the given pointer as custom pointer */
+#define CURL_HTTPPOST_CALLBACK (1 << 6)
+/* use size in 'contentlen', added in 7.46.0 */
+#define CURL_HTTPPOST_LARGE (1 << 7)
+
+  char *showfilename;               /* The filename to show. If not set, the
+                                       actual filename is used (if this is
+                                       a file part) */
+  void *userp;                      /* custom pointer used for
+                                       HTTPPOST_CALLBACK posts */
+  curl_off_t contentlen;            /* alternative length of contents
+                                       field. Used if CURL_HTTPPOST_LARGE is
+                                       set. Added in 7.46.0 */
+};
+
+/* This is a return code for the progress callback that, when returned,
+   signals libcurl to continue executing the default progress function */
+#define CURL_PROGRESSFUNC_CONTINUE 0x10000001
+
+/* This is the CURLOPT_PROGRESSFUNCTION callback prototype. It is now
+   considered deprecated but was the only choice up until 7.31.0 */
+typedef int (*curl_progress_callback)(void *clientp,
+                                      double dltotal,
+                                      double dlnow,
+                                      double ultotal,
+                                      double ulnow);
+
+/* This is the CURLOPT_XFERINFOFUNCTION callback prototype. It was introduced
+   in 7.32.0, avoids the use of floating point numbers and provides more
+   detailed information. */
+typedef int (*curl_xferinfo_callback)(void *clientp,
+                                      curl_off_t dltotal,
+                                      curl_off_t dlnow,
+                                      curl_off_t ultotal,
+                                      curl_off_t ulnow);
+
+#ifndef CURL_MAX_READ_SIZE
+  /* The maximum receive buffer size configurable via CURLOPT_BUFFERSIZE. */
+#define CURL_MAX_READ_SIZE (10 * 1024 * 1024)
+#endif
+
+#ifndef CURL_MAX_WRITE_SIZE
+  /* Tests have proven that 20K is a bad buffer size for uploads on Windows,
+     while 16K for some odd reason performed a lot better. We do the ifndef
+     check to allow this value to easier be changed at build time for those
+     who feel adventurous. The practical minimum is about 400 bytes since
+     libcurl uses a buffer of this size as a scratch area (unrelated to
+     network send operations). */
+#define CURL_MAX_WRITE_SIZE 16384
+#endif
+
+#ifndef CURL_MAX_HTTP_HEADER
+/* The only reason to have a max limit for this is to avoid the risk of a bad
+   server feeding libcurl with a never-ending header that causes reallocs
+   infinitely */
+#define CURL_MAX_HTTP_HEADER (100 * 1024)
+#endif
+
+/* This is a magic return code for the write callback that, when returned,
+   signals libcurl to pause receiving on the current transfer. */
+#define CURL_WRITEFUNC_PAUSE 0x10000001
+
+/* This is a magic return code for the write callback that, when returned,
+   signals an error from the callback. */
+#define CURL_WRITEFUNC_ERROR 0xFFFFFFFF
+
+typedef size_t (*curl_write_callback)(char *buffer,
+                                      size_t size,
+                                      size_t nitems,
+                                      void *outstream);
+
+/* This callback is called when a new resolver request is made */
+typedef int (*curl_resolver_start_callback)(void *resolver_state,
+                                            void *reserved, void *userdata);
+
+/* enumeration of file types */
+typedef enum {
+  CURLFILETYPE_FILE = 0,
+  CURLFILETYPE_DIRECTORY,
+  CURLFILETYPE_SYMLINK,
+  CURLFILETYPE_DEVICE_BLOCK,
+  CURLFILETYPE_DEVICE_CHAR,
+  CURLFILETYPE_NAMEDPIPE,
+  CURLFILETYPE_SOCKET,
+  CURLFILETYPE_DOOR, /* is possible only on Sun Solaris now */
+
+  CURLFILETYPE_UNKNOWN /* should never occur */
+} curlfiletype;
+
+#define CURLFINFOFLAG_KNOWN_FILENAME    (1 << 0)
+#define CURLFINFOFLAG_KNOWN_FILETYPE    (1 << 1)
+#define CURLFINFOFLAG_KNOWN_TIME        (1 << 2)
+#define CURLFINFOFLAG_KNOWN_PERM        (1 << 3)
+#define CURLFINFOFLAG_KNOWN_UID         (1 << 4)
+#define CURLFINFOFLAG_KNOWN_GID         (1 << 5)
+#define CURLFINFOFLAG_KNOWN_SIZE        (1 << 6)
+#define CURLFINFOFLAG_KNOWN_HLINKCOUNT  (1 << 7)
+
+/* Information about a single file, used when doing FTP wildcard matching */
+struct curl_fileinfo {
+  char *filename;
+  curlfiletype filetype;
+  time_t time; /* always zero! */
+  unsigned int perm;
+  int uid;
+  int gid;
+  curl_off_t size;
+  long int hardlinks;
+
+  struct {
+    /* If some of these fields is not NULL, it is a pointer to b_data. */
+    char *time;
+    char *perm;
+    char *user;
+    char *group;
+    char *target; /* pointer to the target filename of a symlink */
+  } strings;
+
+  unsigned int flags;
+
+  /* These are libcurl private struct fields. Previously used by libcurl, so
+     they must never be interfered with. */
+  char *b_data;
+  size_t b_size;
+  size_t b_used;
+};
+
+/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */
+#define CURL_CHUNK_BGN_FUNC_OK      0
+#define CURL_CHUNK_BGN_FUNC_FAIL    1 /* tell the lib to end the task */
+#define CURL_CHUNK_BGN_FUNC_SKIP    2 /* skip this chunk over */
+
+/* if splitting of data transfer is enabled, this callback is called before
+   download of an individual chunk started. Note that parameter "remains" works
+   only for FTP wildcard downloading (for now), otherwise is not used */
+typedef long (*curl_chunk_bgn_callback)(const void *transfer_info,
+                                        void *ptr,
+                                        int remains);
+
+/* return codes for CURLOPT_CHUNK_END_FUNCTION */
+#define CURL_CHUNK_END_FUNC_OK      0
+#define CURL_CHUNK_END_FUNC_FAIL    1 /* tell the lib to end the task */
+
+/* If splitting of data transfer is enabled this callback is called after
+   download of an individual chunk finished.
+   Note! After this callback was set then it have to be called FOR ALL chunks.
+   Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC.
+   This is the reason why we do not need "transfer_info" parameter in this
+   callback and we are not interested in "remains" parameter too. */
+typedef long (*curl_chunk_end_callback)(void *ptr);
+
+/* return codes for FNMATCHFUNCTION */
+#define CURL_FNMATCHFUNC_MATCH    0 /* string corresponds to the pattern */
+#define CURL_FNMATCHFUNC_NOMATCH  1 /* pattern does not match the string */
+#define CURL_FNMATCHFUNC_FAIL     2 /* an error occurred */
+
+/* callback type for wildcard downloading pattern matching. If the
+   string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */
+typedef int (*curl_fnmatch_callback)(void *ptr,
+                                     const char *pattern,
+                                     const char *string);
+
+/* These are the return codes for the seek callbacks */
+#define CURL_SEEKFUNC_OK       0
+#define CURL_SEEKFUNC_FAIL     1 /* fail the entire transfer */
+#define CURL_SEEKFUNC_CANTSEEK 2 /* tell libcurl seeking cannot be done, so
+                                    libcurl might try other means instead */
+typedef int (*curl_seek_callback)(void *instream,
+                                  curl_off_t offset,
+                                  int origin); /* 'whence' */
+
+/* This is a return code for the read callback that, when returned,
+   signals libcurl to immediately abort the current transfer. */
+#define CURL_READFUNC_ABORT 0x10000000
+/* This is a return code for the read callback that, when returned,
+   signals libcurl to pause sending data on the current transfer. */
+#define CURL_READFUNC_PAUSE 0x10000001
+
+/* Return code for when the trailing headers' callback has terminated
+   without any errors */
+#define CURL_TRAILERFUNC_OK 0
+/* Return code for when was an error in the trailing header's list and we
+  want to abort the request */
+#define CURL_TRAILERFUNC_ABORT 1
+
+typedef size_t (*curl_read_callback)(char *buffer,
+                                     size_t size,
+                                     size_t nitems,
+                                     void *instream);
+
+typedef int (*curl_trailer_callback)(struct curl_slist **list,
+                                     void *userdata);
+
+typedef enum {
+  CURLSOCKTYPE_IPCXN,  /* socket created for a specific IP connection */
+  CURLSOCKTYPE_ACCEPT, /* socket created by accept() call */
+  CURLSOCKTYPE_LAST    /* never use */
+} curlsocktype;
+
+/* The return code from the sockopt_callback can signal information back
+   to libcurl: */
+#define CURL_SOCKOPT_OK 0
+#define CURL_SOCKOPT_ERROR 1 /* causes libcurl to abort and return
+                                CURLE_ABORTED_BY_CALLBACK */
+#define CURL_SOCKOPT_ALREADY_CONNECTED 2
+
+typedef int (*curl_sockopt_callback)(void *clientp,
+                                     curl_socket_t curlfd,
+                                     curlsocktype purpose);
+
+struct curl_sockaddr {
+  int family;
+  int socktype;
+  int protocol;
+  unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it
+                           turned really ugly and painful on the systems that
+                           lack this type */
+  struct sockaddr addr;
+};
+
+typedef curl_socket_t
+(*curl_opensocket_callback)(void *clientp,
+                            curlsocktype purpose,
+                            struct curl_sockaddr *address);
+
+typedef int
+(*curl_closesocket_callback)(void *clientp, curl_socket_t item);
+
+typedef enum {
+  CURLIOE_OK,            /* I/O operation successful */
+  CURLIOE_UNKNOWNCMD,    /* command was unknown to callback */
+  CURLIOE_FAILRESTART,   /* failed to restart the read */
+  CURLIOE_LAST           /* never use */
+} curlioerr;
+
+typedef enum {
+  CURLIOCMD_NOP,         /* no operation */
+  CURLIOCMD_RESTARTREAD, /* restart the read stream from start */
+  CURLIOCMD_LAST         /* never use */
+} curliocmd;
+
+typedef curlioerr (*curl_ioctl_callback)(CURL *handle,
+                                         int cmd,
+                                         void *clientp);
+
+#ifndef CURL_DID_MEMORY_FUNC_TYPEDEFS
+/*
+ * The following typedef's are signatures of malloc, free, realloc, strdup and
+ * calloc respectively. Function pointers of these types can be passed to the
+ * curl_global_init_mem() function to set user defined memory management
+ * callback routines.
+ */
+typedef void *(*curl_malloc_callback)(size_t size);
+typedef void (*curl_free_callback)(void *ptr);
+typedef void *(*curl_realloc_callback)(void *ptr, size_t size);
+typedef char *(*curl_strdup_callback)(const char *str);
+typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size);
+
+#define CURL_DID_MEMORY_FUNC_TYPEDEFS
+#endif
+
+/* the kind of data that is passed to information_callback */
+typedef enum {
+  CURLINFO_TEXT = 0,
+  CURLINFO_HEADER_IN,    /* 1 */
+  CURLINFO_HEADER_OUT,   /* 2 */
+  CURLINFO_DATA_IN,      /* 3 */
+  CURLINFO_DATA_OUT,     /* 4 */
+  CURLINFO_SSL_DATA_IN,  /* 5 */
+  CURLINFO_SSL_DATA_OUT, /* 6 */
+  CURLINFO_END
+} curl_infotype;
+
+typedef int (*curl_debug_callback)
+       (CURL *handle,      /* the handle/transfer this concerns */
+        curl_infotype type, /* what kind of data */
+        char *data,        /* points to the data */
+        size_t size,       /* size of the data pointed to */
+        void *userptr);    /* whatever the user please */
+
+/* This is the CURLOPT_PREREQFUNCTION callback prototype. */
+typedef int (*curl_prereq_callback)(void *clientp,
+                                    char *conn_primary_ip,
+                                    char *conn_local_ip,
+                                    int conn_primary_port,
+                                    int conn_local_port);
+
+/* Return code for when the pre-request callback has terminated without
+   any errors */
+#define CURL_PREREQFUNC_OK 0
+/* Return code for when the pre-request callback wants to abort the
+   request */
+#define CURL_PREREQFUNC_ABORT 1
+
+/* All possible error codes from all sorts of curl functions. Future versions
+   may return other values, stay prepared.
+
+   Always add new return codes last. Never *EVER* remove any. The return
+   codes must remain the same!
+ */
+
+typedef enum {
+  CURLE_OK = 0,
+  CURLE_UNSUPPORTED_PROTOCOL,    /* 1 */
+  CURLE_FAILED_INIT,             /* 2 */
+  CURLE_URL_MALFORMAT,           /* 3 */
+  CURLE_NOT_BUILT_IN,            /* 4 - [was obsoleted in August 2007 for
+                                    7.17.0, reused in April 2011 for 7.21.5] */
+  CURLE_COULDNT_RESOLVE_PROXY,   /* 5 */
+  CURLE_COULDNT_RESOLVE_HOST,    /* 6 */
+  CURLE_COULDNT_CONNECT,         /* 7 */
+  CURLE_WEIRD_SERVER_REPLY,      /* 8 */
+  CURLE_REMOTE_ACCESS_DENIED,    /* 9 a service was denied by the server
+                                    due to lack of access - when login fails
+                                    this is not returned. */
+  CURLE_FTP_ACCEPT_FAILED,       /* 10 - [was obsoleted in April 2006 for
+                                    7.15.4, reused in Dec 2011 for 7.24.0]*/
+  CURLE_FTP_WEIRD_PASS_REPLY,    /* 11 */
+  CURLE_FTP_ACCEPT_TIMEOUT,      /* 12 - timeout occurred accepting server
+                                    [was obsoleted in August 2007 for 7.17.0,
+                                    reused in Dec 2011 for 7.24.0]*/
+  CURLE_FTP_WEIRD_PASV_REPLY,    /* 13 */
+  CURLE_FTP_WEIRD_227_FORMAT,    /* 14 */
+  CURLE_FTP_CANT_GET_HOST,       /* 15 */
+  CURLE_HTTP2,                   /* 16 - A problem in the http2 framing layer.
+                                    [was obsoleted in August 2007 for 7.17.0,
+                                    reused in July 2014 for 7.38.0] */
+  CURLE_FTP_COULDNT_SET_TYPE,    /* 17 */
+  CURLE_PARTIAL_FILE,            /* 18 */
+  CURLE_FTP_COULDNT_RETR_FILE,   /* 19 */
+  CURLE_OBSOLETE20,              /* 20 - NOT USED */
+  CURLE_QUOTE_ERROR,             /* 21 - quote command failure */
+  CURLE_HTTP_RETURNED_ERROR,     /* 22 */
+  CURLE_WRITE_ERROR,             /* 23 */
+  CURLE_OBSOLETE24,              /* 24 - NOT USED */
+  CURLE_UPLOAD_FAILED,           /* 25 - failed upload "command" */
+  CURLE_READ_ERROR,              /* 26 - could not open/read from file */
+  CURLE_OUT_OF_MEMORY,           /* 27 */
+  CURLE_OPERATION_TIMEDOUT,      /* 28 - the timeout time was reached */
+  CURLE_OBSOLETE29,              /* 29 - NOT USED */
+  CURLE_FTP_PORT_FAILED,         /* 30 - FTP PORT operation failed */
+  CURLE_FTP_COULDNT_USE_REST,    /* 31 - the REST command failed */
+  CURLE_OBSOLETE32,              /* 32 - NOT USED */
+  CURLE_RANGE_ERROR,             /* 33 - RANGE "command" did not work */
+  CURLE_OBSOLETE34,              /* 34 */
+  CURLE_SSL_CONNECT_ERROR,       /* 35 - wrong when connecting with SSL */
+  CURLE_BAD_DOWNLOAD_RESUME,     /* 36 - could not resume download */
+  CURLE_FILE_COULDNT_READ_FILE,  /* 37 */
+  CURLE_LDAP_CANNOT_BIND,        /* 38 */
+  CURLE_LDAP_SEARCH_FAILED,      /* 39 */
+  CURLE_OBSOLETE40,              /* 40 - NOT USED */
+  CURLE_OBSOLETE41,              /* 41 - NOT USED starting with 7.53.0 */
+  CURLE_ABORTED_BY_CALLBACK,     /* 42 */
+  CURLE_BAD_FUNCTION_ARGUMENT,   /* 43 */
+  CURLE_OBSOLETE44,              /* 44 - NOT USED */
+  CURLE_INTERFACE_FAILED,        /* 45 - CURLOPT_INTERFACE failed */
+  CURLE_OBSOLETE46,              /* 46 - NOT USED */
+  CURLE_TOO_MANY_REDIRECTS,      /* 47 - catch endless re-direct loops */
+  CURLE_UNKNOWN_OPTION,          /* 48 - User specified an unknown option */
+  CURLE_SETOPT_OPTION_SYNTAX,    /* 49 - Malformed setopt option */
+  CURLE_OBSOLETE50,              /* 50 - NOT USED */
+  CURLE_OBSOLETE51,              /* 51 - NOT USED */
+  CURLE_GOT_NOTHING,             /* 52 - when this is a specific error */
+  CURLE_SSL_ENGINE_NOTFOUND,     /* 53 - SSL crypto engine not found */
+  CURLE_SSL_ENGINE_SETFAILED,    /* 54 - can not set SSL crypto engine as
+                                    default */
+  CURLE_SEND_ERROR,              /* 55 - failed sending network data */
+  CURLE_RECV_ERROR,              /* 56 - failure in receiving network data */
+  CURLE_OBSOLETE57,              /* 57 - NOT IN USE */
+  CURLE_SSL_CERTPROBLEM,         /* 58 - problem with the local certificate */
+  CURLE_SSL_CIPHER,              /* 59 - could not use specified cipher */
+  CURLE_PEER_FAILED_VERIFICATION, /* 60 - peer's certificate or fingerprint
+                                     was not verified fine */
+  CURLE_BAD_CONTENT_ENCODING,    /* 61 - Unrecognized/bad encoding */
+  CURLE_OBSOLETE62,              /* 62 - NOT IN USE since 7.82.0 */
+  CURLE_FILESIZE_EXCEEDED,       /* 63 - Maximum file size exceeded */
+  CURLE_USE_SSL_FAILED,          /* 64 - Requested FTP SSL level failed */
+  CURLE_SEND_FAIL_REWIND,        /* 65 - Sending the data requires a rewind
+                                    that failed */
+  CURLE_SSL_ENGINE_INITFAILED,   /* 66 - failed to initialize ENGINE */
+  CURLE_LOGIN_DENIED,            /* 67 - user, password or similar was not
+                                    accepted and we failed to login */
+  CURLE_TFTP_NOTFOUND,           /* 68 - file not found on server */
+  CURLE_TFTP_PERM,               /* 69 - permission problem on server */
+  CURLE_REMOTE_DISK_FULL,        /* 70 - out of disk space on server */
+  CURLE_TFTP_ILLEGAL,            /* 71 - Illegal TFTP operation */
+  CURLE_TFTP_UNKNOWNID,          /* 72 - Unknown transfer ID */
+  CURLE_REMOTE_FILE_EXISTS,      /* 73 - File already exists */
+  CURLE_TFTP_NOSUCHUSER,         /* 74 - No such user */
+  CURLE_OBSOLETE75,              /* 75 - NOT IN USE since 7.82.0 */
+  CURLE_OBSOLETE76,              /* 76 - NOT IN USE since 7.82.0 */
+  CURLE_SSL_CACERT_BADFILE,      /* 77 - could not load CACERT file, missing
+                                    or wrong format */
+  CURLE_REMOTE_FILE_NOT_FOUND,   /* 78 - remote file not found */
+  CURLE_SSH,                     /* 79 - error from the SSH layer, somewhat
+                                    generic so the error message is of
+                                    interest when this has happened */
+
+  CURLE_SSL_SHUTDOWN_FAILED,     /* 80 - Failed to shut down the SSL
+                                    connection */
+  CURLE_AGAIN,                   /* 81 - socket is not ready for send/recv,
+                                    wait till it is ready and try again (Added
+                                    in 7.18.2) */
+  CURLE_SSL_CRL_BADFILE,         /* 82 - could not load CRL file, missing or
+                                    wrong format (Added in 7.19.0) */
+  CURLE_SSL_ISSUER_ERROR,        /* 83 - Issuer check failed.  (Added in
+                                    7.19.0) */
+  CURLE_FTP_PRET_FAILED,         /* 84 - a PRET command failed */
+  CURLE_RTSP_CSEQ_ERROR,         /* 85 - mismatch of RTSP CSeq numbers */
+  CURLE_RTSP_SESSION_ERROR,      /* 86 - mismatch of RTSP Session Ids */
+  CURLE_FTP_BAD_FILE_LIST,       /* 87 - unable to parse FTP file list */
+  CURLE_CHUNK_FAILED,            /* 88 - chunk callback reported error */
+  CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the
+                                    session is queued */
+  CURLE_SSL_PINNEDPUBKEYNOTMATCH, /* 90 - specified pinned public key did not
+                                     match */
+  CURLE_SSL_INVALIDCERTSTATUS,   /* 91 - invalid certificate status */
+  CURLE_HTTP2_STREAM,            /* 92 - stream error in HTTP/2 framing layer
+                                    */
+  CURLE_RECURSIVE_API_CALL,      /* 93 - an api function was called from
+                                    inside a callback */
+  CURLE_AUTH_ERROR,              /* 94 - an authentication function returned an
+                                    error */
+  CURLE_HTTP3,                   /* 95 - An HTTP/3 layer problem */
+  CURLE_QUIC_CONNECT_ERROR,      /* 96 - QUIC connection error */
+  CURLE_PROXY,                   /* 97 - proxy handshake error */
+  CURLE_SSL_CLIENTCERT,          /* 98 - client-side certificate required */
+  CURLE_UNRECOVERABLE_POLL,      /* 99 - poll/select returned fatal error */
+  CURLE_TOO_LARGE,               /* 100 - a value/data met its maximum */
+  CURLE_ECH_REQUIRED,            /* 101 - ECH tried but failed */
+  CURL_LAST /* never use! */
+} CURLcode;
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+                          the obsolete stuff removed! */
+
+/* removed in 7.53.0 */
+#define CURLE_FUNCTION_NOT_FOUND CURLE_OBSOLETE41
+
+/* removed in 7.56.0 */
+#define CURLE_HTTP_POST_ERROR CURLE_OBSOLETE34
+
+/* Previously obsolete error code reused in 7.38.0 */
+#define CURLE_OBSOLETE16 CURLE_HTTP2
+
+/* Previously obsolete error codes reused in 7.24.0 */
+#define CURLE_OBSOLETE10 CURLE_FTP_ACCEPT_FAILED
+#define CURLE_OBSOLETE12 CURLE_FTP_ACCEPT_TIMEOUT
+
+/*  compatibility with older names */
+#define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING
+#define CURLE_FTP_WEIRD_SERVER_REPLY CURLE_WEIRD_SERVER_REPLY
+
+/* The following were added in 7.62.0 */
+#define CURLE_SSL_CACERT CURLE_PEER_FAILED_VERIFICATION
+
+/* The following were added in 7.21.5, April 2011 */
+#define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION
+
+/* Added for 7.78.0 */
+#define CURLE_TELNET_OPTION_SYNTAX CURLE_SETOPT_OPTION_SYNTAX
+
+/* The following were added in 7.17.1 */
+/* These are scheduled to disappear by 2009 */
+#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION
+
+/* The following were added in 7.17.0 */
+/* These are scheduled to disappear by 2009 */
+#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* no one should be using this! */
+#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46
+#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44
+#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10
+#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16
+#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32
+#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29
+#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12
+#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20
+#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40
+#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24
+#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57
+#define CURLE_URL_MALFORMAT_USER CURLE_NOT_BUILT_IN
+
+#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED
+#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE
+#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR
+#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL
+#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS
+#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR
+#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED
+
+/* The following were added earlier */
+
+#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT
+#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR
+#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED
+#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED
+#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
+#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
+#define CURLE_LDAP_INVALID_URL CURLE_OBSOLETE62
+#define CURLE_CONV_REQD CURLE_OBSOLETE76
+#define CURLE_CONV_FAILED CURLE_OBSOLETE75
+
+/* This was the error code 50 in 7.7.3 and a few earlier versions, this
+   is no longer used by libcurl but is instead #defined here only to not
+   make programs break */
+#define CURLE_ALREADY_COMPLETE 99999
+
+/* Provide defines for really old option names */
+#define CURLOPT_FILE CURLOPT_WRITEDATA /* name changed in 7.9.7 */
+#define CURLOPT_INFILE CURLOPT_READDATA /* name changed in 7.9.7 */
+#define CURLOPT_WRITEHEADER CURLOPT_HEADERDATA
+
+/* Since long deprecated options with no code in the lib that does anything
+   with them. */
+#define CURLOPT_WRITEINFO CURLOPT_OBSOLETE40
+#define CURLOPT_CLOSEPOLICY CURLOPT_OBSOLETE72
+#define CURLOPT_OBSOLETE72 9999
+#define CURLOPT_OBSOLETE40 9999
+
+#endif /* !CURL_NO_OLDIES */
+
+/*
+ * Proxy error codes. Returned in CURLINFO_PROXY_ERROR if CURLE_PROXY was
+ * return for the transfers.
+ */
+typedef enum {
+  CURLPX_OK,
+  CURLPX_BAD_ADDRESS_TYPE,
+  CURLPX_BAD_VERSION,
+  CURLPX_CLOSED,
+  CURLPX_GSSAPI,
+  CURLPX_GSSAPI_PERMSG,
+  CURLPX_GSSAPI_PROTECTION,
+  CURLPX_IDENTD,
+  CURLPX_IDENTD_DIFFER,
+  CURLPX_LONG_HOSTNAME,
+  CURLPX_LONG_PASSWD,
+  CURLPX_LONG_USER,
+  CURLPX_NO_AUTH,
+  CURLPX_RECV_ADDRESS,
+  CURLPX_RECV_AUTH,
+  CURLPX_RECV_CONNECT,
+  CURLPX_RECV_REQACK,
+  CURLPX_REPLY_ADDRESS_TYPE_NOT_SUPPORTED,
+  CURLPX_REPLY_COMMAND_NOT_SUPPORTED,
+  CURLPX_REPLY_CONNECTION_REFUSED,
+  CURLPX_REPLY_GENERAL_SERVER_FAILURE,
+  CURLPX_REPLY_HOST_UNREACHABLE,
+  CURLPX_REPLY_NETWORK_UNREACHABLE,
+  CURLPX_REPLY_NOT_ALLOWED,
+  CURLPX_REPLY_TTL_EXPIRED,
+  CURLPX_REPLY_UNASSIGNED,
+  CURLPX_REQUEST_FAILED,
+  CURLPX_RESOLVE_HOST,
+  CURLPX_SEND_AUTH,
+  CURLPX_SEND_CONNECT,
+  CURLPX_SEND_REQUEST,
+  CURLPX_UNKNOWN_FAIL,
+  CURLPX_UNKNOWN_MODE,
+  CURLPX_USER_REJECTED,
+  CURLPX_LAST /* never use */
+} CURLproxycode;
+
+/* This prototype applies to all conversion callbacks */
+typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length);
+
+typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl,    /* easy handle */
+                                          void *ssl_ctx, /* actually an OpenSSL
+                                                            or wolfSSL SSL_CTX,
+                                                            or an mbedTLS
+                                                          mbedtls_ssl_config */
+                                          void *userptr);
+
+#define CURLPROXY_HTTP            0L /* added in 7.10, new in 7.19.4 default is
+                                        to use CONNECT HTTP/1.1 */
+#define CURLPROXY_HTTP_1_0        1L /* force to use CONNECT HTTP/1.0
+                                        added in 7.19.4 */
+#define CURLPROXY_HTTPS           2L /* HTTPS but stick to HTTP/1
+                                        added in 7.52.0 */
+#define CURLPROXY_HTTPS2          3L /* HTTPS and attempt HTTP/2
+                                        added in 8.2.0 */
+#define CURLPROXY_SOCKS4          4L /* support added in 7.15.2, enum existed
+                                        already in 7.10 */
+#define CURLPROXY_SOCKS5          5L /* added in 7.10 */
+#define CURLPROXY_SOCKS4A         6L /* added in 7.18.0 */
+#define CURLPROXY_SOCKS5_HOSTNAME 7L /* Use the SOCKS5 protocol but pass along
+                                        the hostname rather than the IP
+                                        address. added in 7.18.0 */
+#define CURLPROXY_HTTPS3          8L /* HTTPS and attempt HTTP/3
+                                        added in 8.21.0 */
+
+typedef enum {
+  CURLPROXY_LAST = 9 /* never use */
+} curl_proxytype;  /* this enum was added in 7.10 */
+
+/*
+ * Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options:
+ *
+ * CURLAUTH_NONE         - No HTTP authentication
+ * CURLAUTH_BASIC        - HTTP Basic authentication (default)
+ * CURLAUTH_DIGEST       - HTTP Digest authentication
+ * CURLAUTH_NEGOTIATE    - HTTP Negotiate (SPNEGO) authentication
+ * CURLAUTH_GSSNEGOTIATE - Alias for CURLAUTH_NEGOTIATE (deprecated)
+ * CURLAUTH_NTLM         - HTTP NTLM authentication
+ * CURLAUTH_DIGEST_IE    - HTTP Digest authentication with IE flavor
+ * CURLAUTH_NTLM_WB      - HTTP NTLM authentication delegated to winbind helper
+ * CURLAUTH_BEARER       - HTTP Bearer token authentication
+ * CURLAUTH_ONLY         - Use together with a single other type to force no
+ *                         authentication or that single type
+ * CURLAUTH_ANY          - All fine types set
+ * CURLAUTH_ANYSAFE      - All fine types except Basic
+ */
+
+#define CURLAUTH_NONE         ((unsigned long)0)
+#define CURLAUTH_BASIC        (((unsigned long)1) << 0)
+#define CURLAUTH_DIGEST       (((unsigned long)1) << 1)
+#define CURLAUTH_NEGOTIATE    (((unsigned long)1) << 2)
+/* Deprecated since the advent of CURLAUTH_NEGOTIATE */
+#define CURLAUTH_GSSNEGOTIATE CURLAUTH_NEGOTIATE
+/* Used for CURLOPT_SOCKS5_AUTH to stay terminologically correct */
+#define CURLAUTH_GSSAPI CURLAUTH_NEGOTIATE
+#define CURLAUTH_NTLM         (((unsigned long)1) << 3)
+#define CURLAUTH_DIGEST_IE    (((unsigned long)1) << 4)
+#ifndef CURL_NO_OLDIES
+  /* functionality removed since 8.8.0 */
+#define CURLAUTH_NTLM_WB      (((unsigned long)1) << 5)
+#endif
+#define CURLAUTH_BEARER       (((unsigned long)1) << 6)
+#define CURLAUTH_AWS_SIGV4    (((unsigned long)1) << 7)
+#define CURLAUTH_ONLY         (((unsigned long)1) << 31)
+#define CURLAUTH_ANY          ((~CURLAUTH_DIGEST_IE) & \
+                               ((unsigned long)0xffffffff))
+#define CURLAUTH_ANYSAFE      ((~(CURLAUTH_BASIC | CURLAUTH_DIGEST_IE)) & \
+                               ((unsigned long)0xffffffff))
+
+/* all types supported by server */
+#define CURLSSH_AUTH_ANY       ((unsigned long)0xffffffff)
+#define CURLSSH_AUTH_NONE      0L        /* none allowed, silly but complete */
+#define CURLSSH_AUTH_PUBLICKEY (1L << 0) /* public/private key files */
+#define CURLSSH_AUTH_PASSWORD  (1L << 1) /* password */
+#define CURLSSH_AUTH_HOST      (1L << 2) /* host key files */
+#define CURLSSH_AUTH_KEYBOARD  (1L << 3) /* keyboard interactive */
+#define CURLSSH_AUTH_AGENT     (1L << 4) /* agent (ssh-agent, pageant...) */
+#define CURLSSH_AUTH_GSSAPI    (1L << 5) /* gssapi (kerberos, ...) */
+#define CURLSSH_AUTH_DEFAULT   CURLSSH_AUTH_ANY
+
+#define CURLGSSAPI_DELEGATION_NONE        0L      /* no delegation (default) */
+#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1L<<0) /* if permitted by policy */
+#define CURLGSSAPI_DELEGATION_FLAG        (1L<<1) /* delegate always */
+
+#define CURL_ERROR_SIZE 256
+
+enum curl_khtype {
+  CURLKHTYPE_UNKNOWN,
+  CURLKHTYPE_RSA1,
+  CURLKHTYPE_RSA,
+  CURLKHTYPE_DSS,
+  CURLKHTYPE_ECDSA,
+  CURLKHTYPE_ED25519
+};
+
+struct curl_khkey {
+  const char *key; /* points to a null-terminated string encoded with base64
+                      if len is zero, otherwise to the "raw" data */
+  size_t len;
+  enum curl_khtype keytype;
+};
+
+/* this is the set of return values expected from the curl_sshkeycallback
+   callback */
+enum curl_khstat {
+  CURLKHSTAT_FINE_ADD_TO_FILE,
+  CURLKHSTAT_FINE,
+  CURLKHSTAT_REJECT, /* reject the connection, return an error */
+  CURLKHSTAT_DEFER,  /* do not accept it, but we cannot answer right now.
+                        Causes a CURLE_PEER_FAILED_VERIFICATION error but the
+                        connection is left intact etc */
+  CURLKHSTAT_FINE_REPLACE, /* accept and replace the wrong key */
+  CURLKHSTAT_LAST    /* not for use, only a marker for last-in-list */
+};
+
+/* this is the set of status codes pass in to the callback */
+enum curl_khmatch {
+  CURLKHMATCH_OK,       /* match */
+  CURLKHMATCH_MISMATCH, /* host found, key mismatch! */
+  CURLKHMATCH_MISSING,  /* no matching host/key found */
+  CURLKHMATCH_LAST      /* not for use, only a marker for last-in-list */
+};
+
+typedef int
+  (*curl_sshkeycallback)(CURL *easy,     /* easy handle */
+                         const struct curl_khkey *knownkey, /* known */
+                         const struct curl_khkey *foundkey, /* found */
+                         enum curl_khmatch, /* libcurl's view on the keys */
+                         void *clientp); /* custom pointer passed with */
+                                         /* CURLOPT_SSH_KEYDATA */
+
+typedef int
+  (*curl_sshhostkeycallback)(void *clientp,/* custom pointer passed */
+                                           /* with CURLOPT_SSH_HOSTKEYDATA */
+                          int keytype, /* CURLKHTYPE */
+                          const char *key, /* hostkey to check */
+                          size_t keylen); /* length of the key */
+                          /* return CURLE_OK to accept */
+                          /* or something else to refuse */
+
+/* parameter for the CURLOPT_USE_SSL option */
+#define CURLUSESSL_NONE    0L /* do not attempt to use SSL */
+#define CURLUSESSL_TRY     1L /* try using SSL, proceed anyway otherwise */
+#define CURLUSESSL_CONTROL 2L /* SSL for the control connection or fail */
+#define CURLUSESSL_ALL     3L /* SSL for all communication or fail */
+
+typedef enum {
+  CURLUSESSL_LAST = 4 /* not an option, never use */
+} curl_usessl;
+
+/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */
+
+/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the
+   name of improving interoperability with older servers. Some SSL libraries
+   have introduced workarounds for this flaw but those workarounds sometimes
+   make the SSL communication fail. To regain functionality with those broken
+   servers, a user can this way allow the vulnerability back. */
+#define CURLSSLOPT_ALLOW_BEAST (1L << 0)
+
+/* - NO_REVOKE tells libcurl to disable certificate revocation checks for those
+   SSL backends where such behavior is present. */
+#define CURLSSLOPT_NO_REVOKE (1L << 1)
+
+/* - NO_PARTIALCHAIN tells libcurl to *NOT* accept a partial certificate chain
+   if possible. The OpenSSL backend has this ability. */
+#define CURLSSLOPT_NO_PARTIALCHAIN (1L << 2)
+
+/* - REVOKE_BEST_EFFORT tells libcurl to ignore certificate revocation offline
+   checks and ignore missing revocation list for those SSL backends where such
+   behavior is present. */
+#define CURLSSLOPT_REVOKE_BEST_EFFORT (1L << 3)
+
+/* - CURLSSLOPT_NATIVE_CA tells libcurl to use standard certificate store of
+   operating system. Currently implemented under MS-Windows. */
+#define CURLSSLOPT_NATIVE_CA (1L << 4)
+
+/* - CURLSSLOPT_AUTO_CLIENT_CERT tells libcurl to automatically locate and use
+   a client certificate for authentication. (Schannel) */
+#define CURLSSLOPT_AUTO_CLIENT_CERT (1L << 5)
+
+/* If possible, send data using TLS 1.3 early data */
+#define CURLSSLOPT_EARLYDATA (1L << 6)
+
+/* The default connection attempt delay in milliseconds for happy eyeballs.
+   CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.3 and happy-eyeballs-timeout-ms.d document
+   this value, keep them in sync. */
+#define CURL_HET_DEFAULT 200L
+
+/* The default connection upkeep interval in milliseconds. */
+#define CURL_UPKEEP_INTERVAL_DEFAULT 60000L
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+                          the obsolete stuff removed! */
+
+/* Backwards compatibility with older names */
+/* These are scheduled to disappear by 2009 */
+
+#define CURLFTPSSL_NONE CURLUSESSL_NONE
+#define CURLFTPSSL_TRY CURLUSESSL_TRY
+#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL
+#define CURLFTPSSL_ALL CURLUSESSL_ALL
+#define CURLFTPSSL_LAST CURLUSESSL_LAST
+#define curl_ftpssl curl_usessl
+#endif /* !CURL_NO_OLDIES */
+
+/* parameter for the CURLOPT_FTP_SSL_CCC option */
+#define CURLFTPSSL_CCC_NONE    0L /* do not send CCC */
+#define CURLFTPSSL_CCC_PASSIVE 1L /* Let the server initiate the shutdown */
+#define CURLFTPSSL_CCC_ACTIVE  2L /* Initiate the shutdown */
+
+typedef enum {
+  CURLFTPSSL_CCC_LAST = 3 /* not an option, never use */
+} curl_ftpccc;
+
+/* parameter for the CURLOPT_FTPSSLAUTH option */
+#define CURLFTPAUTH_DEFAULT 0L /* let libcurl decide */
+#define CURLFTPAUTH_SSL     1L /* use "AUTH SSL" */
+#define CURLFTPAUTH_TLS     2L /* use "AUTH TLS" */
+
+typedef enum {
+  CURLFTPAUTH_LAST = 3 /* not an option, never use */
+} curl_ftpauth;
+
+/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */
+#define CURLFTP_CREATE_DIR_NONE  0L /* do NOT create missing dirs! */
+#define CURLFTP_CREATE_DIR       1L /* (FTP/SFTP) if CWD fails, try MKD and
+                                       then CWD again if MKD succeeded, for
+                                       SFTP this does similar magic */
+#define CURLFTP_CREATE_DIR_RETRY 2L /* (FTP only) if CWD fails, try MKD and
+                                       then CWD again even if MKD failed! */
+
+typedef enum {
+  CURLFTP_CREATE_DIR_LAST = 3 /* not an option, never use */
+} curl_ftpcreatedir;
+
+/* parameter for the CURLOPT_FTP_FILEMETHOD option */
+#define CURLFTPMETHOD_DEFAULT   0L /* let libcurl pick */
+#define CURLFTPMETHOD_MULTICWD  1L /* single CWD operation for each path
+                                      part */
+#define CURLFTPMETHOD_NOCWD     2L /* no CWD at all */
+#define CURLFTPMETHOD_SINGLECWD 3L /* one CWD to full dir, then work on file */
+
+typedef enum {
+  CURLFTPMETHOD_LAST = 4 /* not an option, never use */
+} curl_ftpmethod;
+
+/* bitmask defines for CURLOPT_HEADEROPT */
+#define CURLHEADER_UNIFIED  0L
+#define CURLHEADER_SEPARATE (1L << 0)
+
+/* CURLALTSVC_* are bits for the CURLOPT_ALTSVC_CTRL option */
+#define CURLALTSVC_READONLYFILE (1L << 2)
+#define CURLALTSVC_H1           (1L << 3)
+#define CURLALTSVC_H2           (1L << 4)
+#define CURLALTSVC_H3           (1L << 5)
+
+/* bitmask values for CURLOPT_UPLOAD_FLAGS */
+#define CURLULFLAG_ANSWERED (1L << 0)
+#define CURLULFLAG_DELETED  (1L << 1)
+#define CURLULFLAG_DRAFT    (1L << 2)
+#define CURLULFLAG_FLAGGED  (1L << 3)
+#define CURLULFLAG_SEEN     (1L << 4)
+
+struct curl_hstsentry {
+  char *name;
+  size_t namelen;
+  unsigned int includeSubDomains:1;
+  char expire[18]; /* YYYYMMDD HH:MM:SS [null-terminated] */
+};
+
+struct curl_index {
+  size_t index; /* the provided entry's "index" or count */
+  size_t total; /* total number of entries to save */
+};
+
+typedef enum {
+  CURLSTS_OK,
+  CURLSTS_DONE,
+  CURLSTS_FAIL
+} CURLSTScode;
+
+typedef CURLSTScode (*curl_hstsread_callback)(CURL *easy,
+                                              struct curl_hstsentry *e,
+                                              void *userp);
+typedef CURLSTScode (*curl_hstswrite_callback)(CURL *easy,
+                                               struct curl_hstsentry *e,
+                                               struct curl_index *i,
+                                               void *userp);
+
+/* CURLHSTS_* are bits for the CURLOPT_HSTS option */
+#define CURLHSTS_ENABLE       (1L << 0)
+#define CURLHSTS_READONLYFILE (1L << 1)
+
+/* The CURLPROTO_ defines below are for the **deprecated** CURLOPT_*PROTOCOLS
+   options. Do not use. */
+#define CURLPROTO_HTTP    (1L << 0)
+#define CURLPROTO_HTTPS   (1L << 1)
+#define CURLPROTO_FTP     (1L << 2)
+#define CURLPROTO_FTPS    (1L << 3)
+#define CURLPROTO_SCP     (1L << 4)
+#define CURLPROTO_SFTP    (1L << 5)
+#define CURLPROTO_TELNET  (1L << 6)
+#define CURLPROTO_LDAP    (1L << 7)
+#define CURLPROTO_LDAPS   (1L << 8)
+#define CURLPROTO_DICT    (1L << 9)
+#define CURLPROTO_FILE    (1L << 10)
+#define CURLPROTO_TFTP    (1L << 11)
+#define CURLPROTO_IMAP    (1L << 12)
+#define CURLPROTO_IMAPS   (1L << 13)
+#define CURLPROTO_POP3    (1L << 14)
+#define CURLPROTO_POP3S   (1L << 15)
+#define CURLPROTO_SMTP    (1L << 16)
+#define CURLPROTO_SMTPS   (1L << 17)
+#define CURLPROTO_RTSP    (1L << 18)
+#define CURLPROTO_RTMP    (1L << 19)
+#define CURLPROTO_RTMPT   (1L << 20)
+#define CURLPROTO_RTMPE   (1L << 21)
+#define CURLPROTO_RTMPTE  (1L << 22)
+#define CURLPROTO_RTMPS   (1L << 23)
+#define CURLPROTO_RTMPTS  (1L << 24)
+#define CURLPROTO_GOPHER  (1L << 25)
+#define CURLPROTO_SMB     (1L << 26)
+#define CURLPROTO_SMBS    (1L << 27)
+#define CURLPROTO_MQTT    (1L << 28)
+#define CURLPROTO_GOPHERS (1L << 29)
+#define CURLPROTO_ALL     ((unsigned long)0xffffffff) /* old-style enable
+                                                         "everything" */
+
+/* long may be 32 or 64 bits, but we should never depend on anything else
+   but 32 */
+#define CURLOPTTYPE_LONG          0
+#define CURLOPTTYPE_OBJECTPOINT   10000
+#define CURLOPTTYPE_FUNCTIONPOINT 20000
+#define CURLOPTTYPE_OFF_T         30000
+#define CURLOPTTYPE_BLOB          40000
+
+/* *STRINGPOINT is an alias for OBJECTPOINT to allow tools to extract the
+   string options from the header file */
+
+#define CURLOPT(na, t, nu) na = ((t) + (nu))
+#define CURLOPTDEPRECATED(na, t, nu, v, m) na CURL_DEPRECATED(v, m) \
+  = ((t) + (nu))
+
+/* CURLOPT aliases that make no runtime difference */
+
+/* 'char *' argument to a string with a trailing zero */
+#define CURLOPTTYPE_STRINGPOINT CURLOPTTYPE_OBJECTPOINT
+
+/* 'struct curl_slist *' argument */
+#define CURLOPTTYPE_SLISTPOINT  CURLOPTTYPE_OBJECTPOINT
+
+/* 'void *' argument passed untouched to callback */
+#define CURLOPTTYPE_CBPOINT     CURLOPTTYPE_OBJECTPOINT
+
+/* 'long' argument with a set of values/bitmask */
+#define CURLOPTTYPE_VALUES      CURLOPTTYPE_LONG
+
+/*
+ * All CURLOPT_* values.
+ */
+
+typedef enum {
+  /* This is the FILE * or void * the regular output should be written to. */
+  CURLOPT(CURLOPT_WRITEDATA, CURLOPTTYPE_CBPOINT, 1),
+
+  /* The full URL to get/put */
+  CURLOPT(CURLOPT_URL, CURLOPTTYPE_STRINGPOINT, 2),
+
+  /* Port number to connect to, if other than default. */
+  CURLOPT(CURLOPT_PORT, CURLOPTTYPE_LONG, 3),
+
+  /* Name of proxy to use. */
+  CURLOPT(CURLOPT_PROXY, CURLOPTTYPE_STRINGPOINT, 4),
+
+  /* "user:password;options" to use when fetching. */
+  CURLOPT(CURLOPT_USERPWD, CURLOPTTYPE_STRINGPOINT, 5),
+
+  /* "user:password" to use with proxy. */
+  CURLOPT(CURLOPT_PROXYUSERPWD, CURLOPTTYPE_STRINGPOINT, 6),
+
+  /* Range to get, specified as an ASCII string. */
+  CURLOPT(CURLOPT_RANGE, CURLOPTTYPE_STRINGPOINT, 7),
+
+  /* not used */
+
+  /* Specified file stream to upload from (use as input): */
+  CURLOPT(CURLOPT_READDATA, CURLOPTTYPE_CBPOINT, 9),
+
+  /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
+   * bytes big. */
+  CURLOPT(CURLOPT_ERRORBUFFER, CURLOPTTYPE_OBJECTPOINT, 10),
+
+  /* Function that is called to store the output (instead of fwrite). The
+   * parameters use fwrite() syntax, make sure to follow them. */
+  CURLOPT(CURLOPT_WRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 11),
+
+  /* Function that is called to read the input (instead of fread). The
+   * parameters use fread() syntax, make sure to follow them. */
+  CURLOPT(CURLOPT_READFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 12),
+
+  /* Time-out the read operation after this amount of seconds */
+  CURLOPT(CURLOPT_TIMEOUT, CURLOPTTYPE_LONG, 13),
+
+  /* If CURLOPT_READDATA is used, this can be used to inform libcurl about
+   * how large the file being sent really is. That allows better error
+   * checking and better verifies that the upload was successful. -1 means
+   * unknown size.
+   *
+   * For large file support, there is also a _LARGE version of the key
+   * which takes an off_t type, allowing platforms with larger off_t
+   * sizes to handle larger files. See below for INFILESIZE_LARGE.
+   */
+  CURLOPT(CURLOPT_INFILESIZE, CURLOPTTYPE_LONG, 14),
+
+  /* POST static input fields. */
+  CURLOPT(CURLOPT_POSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 15),
+
+  /* Set the referrer page (needed by some CGIs) */
+  CURLOPT(CURLOPT_REFERER, CURLOPTTYPE_STRINGPOINT, 16),
+
+  /* Set the FTP PORT string (interface name, named or numerical IP address)
+     Use i.e '-' to use default address. */
+  CURLOPT(CURLOPT_FTPPORT, CURLOPTTYPE_STRINGPOINT, 17),
+
+  /* Set the User-Agent string (examined by some CGIs) */
+  CURLOPT(CURLOPT_USERAGENT, CURLOPTTYPE_STRINGPOINT, 18),
+
+  /* If the download receives less than "low speed limit" bytes/second
+   * during "low speed time" seconds, the operations is aborted.
+   * You could i.e if you have a pretty high speed connection, abort if
+   * it is less than 2000 bytes/sec during 20 seconds.
+   */
+
+  /* Set the "low speed limit" */
+  CURLOPT(CURLOPT_LOW_SPEED_LIMIT, CURLOPTTYPE_LONG, 19),
+
+  /* Set the "low speed time" */
+  CURLOPT(CURLOPT_LOW_SPEED_TIME, CURLOPTTYPE_LONG, 20),
+
+  /* Set the continuation offset.
+   *
+   * Note there is also a _LARGE version of this key which uses
+   * off_t types, allowing for large file offsets on platforms which
+   * use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE.
+   */
+  CURLOPT(CURLOPT_RESUME_FROM, CURLOPTTYPE_LONG, 21),
+
+  /* Set cookie in request: */
+  CURLOPT(CURLOPT_COOKIE, CURLOPTTYPE_STRINGPOINT, 22),
+
+  /* This points to a linked list of headers, struct curl_slist kind. This
+     list is also used for RTSP (in spite of its name) */
+  CURLOPT(CURLOPT_HTTPHEADER, CURLOPTTYPE_SLISTPOINT, 23),
+
+  /* This points to a linked list of post entries, struct curl_httppost */
+  CURLOPTDEPRECATED(CURLOPT_HTTPPOST, CURLOPTTYPE_OBJECTPOINT, 24,
+                    7.56.0, "Use CURLOPT_MIMEPOST"),
+
+  /* name of the file keeping your private SSL-certificate */
+  CURLOPT(CURLOPT_SSLCERT, CURLOPTTYPE_STRINGPOINT, 25),
+
+  /* password for the SSL or SSH private key */
+  CURLOPT(CURLOPT_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 26),
+
+  /* send TYPE parameter? */
+  CURLOPT(CURLOPT_CRLF, CURLOPTTYPE_LONG, 27),
+
+  /* send linked-list of QUOTE commands */
+  CURLOPT(CURLOPT_QUOTE, CURLOPTTYPE_SLISTPOINT, 28),
+
+  /* send FILE * or void * to store headers to, if you use a callback it
+     is passed to the callback unmodified */
+  CURLOPT(CURLOPT_HEADERDATA, CURLOPTTYPE_CBPOINT, 29),
+
+  /* point to a file to read the initial cookies from, also enables
+     "cookie awareness" */
+  CURLOPT(CURLOPT_COOKIEFILE, CURLOPTTYPE_STRINGPOINT, 31),
+
+  /* What version to specifically try to use.
+     See CURL_SSLVERSION defines below. */
+  CURLOPT(CURLOPT_SSLVERSION, CURLOPTTYPE_VALUES, 32),
+
+  /* What kind of HTTP time condition to use, see defines */
+  CURLOPT(CURLOPT_TIMECONDITION, CURLOPTTYPE_VALUES, 33),
+
+  /* Time to use with the above condition. Specified in number of seconds
+     since 1 Jan 1970 */
+  CURLOPT(CURLOPT_TIMEVALUE, CURLOPTTYPE_LONG, 34),
+
+  /* 35 = OBSOLETE */
+
+  /* Custom request, for customizing the get command like
+     HTTP: DELETE, TRACE and others
+     FTP: to use a different list command
+     */
+  CURLOPT(CURLOPT_CUSTOMREQUEST, CURLOPTTYPE_STRINGPOINT, 36),
+
+  /* FILE handle to use instead of stderr */
+  CURLOPT(CURLOPT_STDERR, CURLOPTTYPE_OBJECTPOINT, 37),
+
+  /* 38 is not used */
+
+  /* send linked-list of post-transfer QUOTE commands */
+  CURLOPT(CURLOPT_POSTQUOTE, CURLOPTTYPE_SLISTPOINT, 39),
+
+  /* 40 is not used */
+
+  /* talk a lot */
+  CURLOPT(CURLOPT_VERBOSE, CURLOPTTYPE_LONG, 41),
+
+  /* throw the header out too */
+  CURLOPT(CURLOPT_HEADER, CURLOPTTYPE_LONG, 42),
+
+  /* shut off the progress meter */
+  CURLOPT(CURLOPT_NOPROGRESS, CURLOPTTYPE_LONG, 43),
+
+  /* use HEAD to get http document */
+  CURLOPT(CURLOPT_NOBODY, CURLOPTTYPE_LONG, 44),
+
+  /* no output on http error codes >= 400 */
+  CURLOPT(CURLOPT_FAILONERROR, CURLOPTTYPE_LONG, 45),
+
+  /* this is an upload */
+  CURLOPT(CURLOPT_UPLOAD, CURLOPTTYPE_LONG, 46),
+
+  /* HTTP POST method */
+  CURLOPT(CURLOPT_POST, CURLOPTTYPE_LONG, 47),
+
+  /* bare names when listing directories */
+  CURLOPT(CURLOPT_DIRLISTONLY, CURLOPTTYPE_LONG, 48),
+
+  /* Append instead of overwrite on upload! */
+  CURLOPT(CURLOPT_APPEND, CURLOPTTYPE_LONG, 50),
+
+  /* Specify whether to read the user+password from the .netrc or the URL.
+   * This must be one of the CURL_NETRC_* enums below. */
+  CURLOPT(CURLOPT_NETRC, CURLOPTTYPE_VALUES, 51),
+
+  /* use Location: Luke! */
+  CURLOPT(CURLOPT_FOLLOWLOCATION, CURLOPTTYPE_LONG, 52),
+
+   /* transfer data in text/ASCII format */
+  CURLOPT(CURLOPT_TRANSFERTEXT, CURLOPTTYPE_LONG, 53),
+
+  /* HTTP PUT */
+  CURLOPTDEPRECATED(CURLOPT_PUT, CURLOPTTYPE_LONG, 54,
+                    7.12.1, "Use CURLOPT_UPLOAD"),
+
+  /* 55 = OBSOLETE */
+
+  /* DEPRECATED
+   * Function that is called instead of the internal progress display
+   * function. This function should be defined as the curl_progress_callback
+   * prototype defines. */
+  CURLOPTDEPRECATED(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56,
+                    7.32.0, "Use CURLOPT_XFERINFOFUNCTION"),
+
+  /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION
+     callbacks */
+  CURLOPT(CURLOPT_XFERINFODATA, CURLOPTTYPE_CBPOINT, 57),
+#define CURLOPT_PROGRESSDATA CURLOPT_XFERINFODATA
+
+  /* We want the referrer field set automatically when following locations */
+  CURLOPT(CURLOPT_AUTOREFERER, CURLOPTTYPE_LONG, 58),
+
+  /* Port of the proxy, can be set in the proxy string as well with:
+     "[host]:[port]" */
+  CURLOPT(CURLOPT_PROXYPORT, CURLOPTTYPE_LONG, 59),
+
+  /* size of the POST input data, if strlen() is not good to use */
+  CURLOPT(CURLOPT_POSTFIELDSIZE, CURLOPTTYPE_LONG, 60),
+
+  /* tunnel non-http operations through an HTTP proxy */
+  CURLOPT(CURLOPT_HTTPPROXYTUNNEL, CURLOPTTYPE_LONG, 61),
+
+  /* Set the interface string to use as outgoing network interface */
+  CURLOPT(CURLOPT_INTERFACE, CURLOPTTYPE_STRINGPOINT, 62),
+
+  /* Set the krb4/5 security level, this also enables krb4/5 awareness. This
+   * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string
+   * is set but does not match one of these, 'private' is used. */
+  CURLOPTDEPRECATED(CURLOPT_KRBLEVEL, CURLOPTTYPE_STRINGPOINT, 63,
+                    8.17.0, "removed"),
+
+  /* Set if we should verify the peer in SSL handshake, set 1 to verify. */
+  CURLOPT(CURLOPT_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 64),
+
+  /* The CApath or CAfile used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_CAINFO, CURLOPTTYPE_STRINGPOINT, 65),
+
+  /* 66 = OBSOLETE */
+  /* 67 = OBSOLETE */
+
+  /* Maximum number of http redirects to follow */
+  CURLOPT(CURLOPT_MAXREDIRS, CURLOPTTYPE_LONG, 68),
+
+  /* Pass a long set to 1 to get the date of the requested document (if
+     possible)! Pass a zero to shut it off. */
+  CURLOPT(CURLOPT_FILETIME, CURLOPTTYPE_LONG, 69),
+
+  /* This points to a linked list of telnet options */
+  CURLOPT(CURLOPT_TELNETOPTIONS, CURLOPTTYPE_SLISTPOINT, 70),
+
+  /* Max amount of cached alive connections */
+  CURLOPT(CURLOPT_MAXCONNECTS, CURLOPTTYPE_LONG, 71),
+
+  /* 72 = OBSOLETE */
+  /* 73 = OBSOLETE */
+
+  /* Set to explicitly use a new connection for the upcoming transfer.
+     Do not use this unless you are absolutely sure of this, as it makes the
+     operation slower and is less friendly for the network. */
+  CURLOPT(CURLOPT_FRESH_CONNECT, CURLOPTTYPE_LONG, 74),
+
+  /* Set to explicitly forbid the upcoming transfer's connection to be reused
+     when done. Do not use this unless you are absolutely sure of this, as it
+     makes the operation slower and is less friendly for the network. */
+  CURLOPT(CURLOPT_FORBID_REUSE, CURLOPTTYPE_LONG, 75),
+
+  /* Set to a filename that contains random data for libcurl to use to
+     seed the random engine when doing SSL connects. */
+  CURLOPTDEPRECATED(CURLOPT_RANDOM_FILE, CURLOPTTYPE_STRINGPOINT, 76,
+                    7.84.0, "Serves no purpose anymore"),
+
+  /* Set to the Entropy Gathering Daemon socket pathname */
+  CURLOPTDEPRECATED(CURLOPT_EGDSOCKET, CURLOPTTYPE_STRINGPOINT, 77,
+                    7.84.0, "Serves no purpose anymore"),
+
+  /* Time-out connect operations after this amount of seconds, if connects are
+     OK within this time, then fine... This only aborts the connect phase. */
+  CURLOPT(CURLOPT_CONNECTTIMEOUT, CURLOPTTYPE_LONG, 78),
+
+  /* Function that is called to store headers (instead of fwrite). The
+   * parameters use fwrite() syntax, make sure to follow them. */
+  CURLOPT(CURLOPT_HEADERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 79),
+
+  /* Set this to force the HTTP request to get back to GET. Only really usable
+     if POST, PUT or a custom request have been used first.
+   */
+  CURLOPT(CURLOPT_HTTPGET, CURLOPTTYPE_LONG, 80),
+
+  /* Set if we should verify the Common name from the peer certificate in SSL
+   * handshake, set 1 to check existence, 2 to ensure that it matches the
+   * provided hostname. */
+  CURLOPT(CURLOPT_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 81),
+
+  /* Specify which filename to write all known cookies in after completed
+     operation. Set filename to "-" (dash) to make it go to stdout. */
+  CURLOPT(CURLOPT_COOKIEJAR, CURLOPTTYPE_STRINGPOINT, 82),
+
+  /* Specify which TLS 1.2 (1.1, 1.0) ciphers to use */
+  CURLOPT(CURLOPT_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 83),
+
+  /* Specify which HTTP version to use! This must be set to one of the
+     CURL_HTTP_VERSION* enums set below. */
+  CURLOPT(CURLOPT_HTTP_VERSION, CURLOPTTYPE_VALUES, 84),
+
+  /* Specifically switch on or off the FTP engine's use of the EPSV command. By
+     default, that one is always attempted before the more traditional
+     PASV command. */
+  CURLOPT(CURLOPT_FTP_USE_EPSV, CURLOPTTYPE_LONG, 85),
+
+  /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
+  CURLOPT(CURLOPT_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 86),
+
+  /* name of the file keeping your private SSL-key */
+  CURLOPT(CURLOPT_SSLKEY, CURLOPTTYPE_STRINGPOINT, 87),
+
+  /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
+  CURLOPT(CURLOPT_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 88),
+
+  /* crypto engine for the SSL-sub system */
+  CURLOPT(CURLOPT_SSLENGINE, CURLOPTTYPE_STRINGPOINT, 89),
+
+  /* set the crypto engine for the SSL-sub system as default
+     the param has no meaning...
+   */
+  CURLOPT(CURLOPT_SSLENGINE_DEFAULT, CURLOPTTYPE_LONG, 90),
+
+  /* Non-zero value means to use the global dns cache */
+  /* DEPRECATED, do not use! */
+  CURLOPTDEPRECATED(CURLOPT_DNS_USE_GLOBAL_CACHE, CURLOPTTYPE_LONG, 91,
+                    7.11.1, "Use CURLOPT_SHARE"),
+
+  /* DNS cache timeout */
+  CURLOPT(CURLOPT_DNS_CACHE_TIMEOUT, CURLOPTTYPE_LONG, 92),
+
+  /* send linked-list of pre-transfer QUOTE commands */
+  CURLOPT(CURLOPT_PREQUOTE, CURLOPTTYPE_SLISTPOINT, 93),
+
+  /* set the debug function */
+  CURLOPT(CURLOPT_DEBUGFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 94),
+
+  /* set the data for the debug function */
+  CURLOPT(CURLOPT_DEBUGDATA, CURLOPTTYPE_CBPOINT, 95),
+
+  /* mark this as start of a cookie session */
+  CURLOPT(CURLOPT_COOKIESESSION, CURLOPTTYPE_LONG, 96),
+
+  /* The CApath directory used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_CAPATH, CURLOPTTYPE_STRINGPOINT, 97),
+
+  /* Instruct libcurl to use a smaller receive buffer */
+  CURLOPT(CURLOPT_BUFFERSIZE, CURLOPTTYPE_LONG, 98),
+
+  /* Instruct libcurl to not use any signal/alarm handlers, even when using
+     timeouts. This option is useful for multi-threaded applications.
+     See libcurl-the-guide for more background information. */
+  CURLOPT(CURLOPT_NOSIGNAL, CURLOPTTYPE_LONG, 99),
+
+  /* Provide a CURLShare for mutexing non-ts data */
+  CURLOPT(CURLOPT_SHARE, CURLOPTTYPE_OBJECTPOINT, 100),
+
+  /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
+     CURLPROXY_HTTPS, CURLPROXY_HTTPS2, CURLPROXY_HTTPS3, CURLPROXY_SOCKS4,
+     CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5. */
+  CURLOPT(CURLOPT_PROXYTYPE, CURLOPTTYPE_VALUES, 101),
+
+  /* Set the Accept-Encoding string. Use this to tell a server you would like
+     the response to be compressed. Before 7.21.6, this was known as
+     CURLOPT_ENCODING */
+  CURLOPT(CURLOPT_ACCEPT_ENCODING, CURLOPTTYPE_STRINGPOINT, 102),
+
+  /* Set pointer to private data */
+  CURLOPT(CURLOPT_PRIVATE, CURLOPTTYPE_OBJECTPOINT, 103),
+
+  /* Set aliases for HTTP 200 in the HTTP Response header */
+  CURLOPT(CURLOPT_HTTP200ALIASES, CURLOPTTYPE_SLISTPOINT, 104),
+
+  /* Continue to send authentication (user+password) when following locations,
+     even when hostname changed. This can potentially send off the name
+     and password to whatever host the server decides. */
+  CURLOPT(CURLOPT_UNRESTRICTED_AUTH, CURLOPTTYPE_LONG, 105),
+
+  /* Specifically switch on or off the FTP engine's use of the EPRT command (
+     it also disables the LPRT attempt). By default, those ones are always
+     attempted before the good old traditional PORT command. */
+  CURLOPT(CURLOPT_FTP_USE_EPRT, CURLOPTTYPE_LONG, 106),
+
+  /* Set this to a bitmask value to enable the particular authentications
+     methods you like. Use this in combination with CURLOPT_USERPWD.
+     Note that setting multiple bits may cause extra network round-trips. */
+  CURLOPT(CURLOPT_HTTPAUTH, CURLOPTTYPE_VALUES, 107),
+
+  /* Set the SSL context callback function, currently only for OpenSSL or
+     wolfSSL ssl_ctx, or mbedTLS mbedtls_ssl_config in the second argument.
+     The function must match the curl_ssl_ctx_callback prototype. */
+  CURLOPT(CURLOPT_SSL_CTX_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 108),
+
+  /* Set the userdata for the SSL context callback function's third
+     argument */
+  CURLOPT(CURLOPT_SSL_CTX_DATA, CURLOPTTYPE_CBPOINT, 109),
+
+  /* FTP Option that causes missing dirs to be created on the remote server.
+     In 7.19.4 we introduced the convenience enums for this option using the
+     CURLFTP_CREATE_DIR prefix.
+  */
+  CURLOPT(CURLOPT_FTP_CREATE_MISSING_DIRS, CURLOPTTYPE_LONG, 110),
+
+  /* Set this to a bitmask value to enable the particular authentications
+     methods you like. Use this in combination with CURLOPT_PROXYUSERPWD.
+     Note that setting multiple bits may cause extra network round-trips. */
+  CURLOPT(CURLOPT_PROXYAUTH, CURLOPTTYPE_VALUES, 111),
+
+  /* Option that changes the timeout, in seconds, associated with getting a
+     response. This is different from transfer timeout time and essentially
+     places a demand on the server to acknowledge commands in a timely
+     manner. For FTP, SMTP, IMAP and POP3. */
+  CURLOPT(CURLOPT_SERVER_RESPONSE_TIMEOUT, CURLOPTTYPE_LONG, 112),
+
+  /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
+     tell libcurl to use those IP versions only. This only has effect on
+     systems with support for more than one, i.e IPv4 _and_ IPv6. */
+  CURLOPT(CURLOPT_IPRESOLVE, CURLOPTTYPE_VALUES, 113),
+
+  /* Set this option to limit the size of a file that is to be downloaded from
+     an HTTP or FTP server.
+
+     Note there is also _LARGE version which adds large file support for
+     platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */
+  CURLOPT(CURLOPT_MAXFILESIZE, CURLOPTTYPE_LONG, 114),
+
+  /* See the comment for INFILESIZE above, but in short, specifies
+   * the size of the file being uploaded.  -1 means unknown.
+   */
+  CURLOPT(CURLOPT_INFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 115),
+
+  /* Sets the continuation offset. There is also a CURLOPTTYPE_LONG version
+   * of this; look above for RESUME_FROM.
+   */
+  CURLOPT(CURLOPT_RESUME_FROM_LARGE, CURLOPTTYPE_OFF_T, 116),
+
+  /* Sets the maximum size of data that is to be downloaded from
+   * an HTTP or FTP server. See MAXFILESIZE above for the LONG version.
+   */
+  CURLOPT(CURLOPT_MAXFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 117),
+
+  /* Set this option to the filename of your .netrc file you want libcurl
+     to parse (using the CURLOPT_NETRC option). If not set, libcurl does
+     a poor attempt to find the user's home directory and check for a .netrc
+     file in there. */
+  CURLOPT(CURLOPT_NETRC_FILE, CURLOPTTYPE_STRINGPOINT, 118),
+
+  /* Enable SSL/TLS for FTP, pick one of:
+     CURLUSESSL_TRY     - try using SSL, proceed anyway otherwise
+     CURLUSESSL_CONTROL - SSL for the control connection or fail
+     CURLUSESSL_ALL     - SSL for all communication or fail
+  */
+  CURLOPT(CURLOPT_USE_SSL, CURLOPTTYPE_VALUES, 119),
+
+  /* The _LARGE version of the standard POSTFIELDSIZE option */
+  CURLOPT(CURLOPT_POSTFIELDSIZE_LARGE, CURLOPTTYPE_OFF_T, 120),
+
+  /* Enable/disable the TCP Nagle algorithm */
+  CURLOPT(CURLOPT_TCP_NODELAY, CURLOPTTYPE_LONG, 121),
+
+  /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 123 OBSOLETE. Gone in 7.16.0 */
+  /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 127 OBSOLETE. Gone in 7.16.0 */
+  /* 128 OBSOLETE. Gone in 7.16.0 */
+
+  /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option
+     can be used to change libcurl's default action which is to first try
+     "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK
+     response has been received.
+
+     Available parameters are:
+     CURLFTPAUTH_DEFAULT - let libcurl decide
+     CURLFTPAUTH_SSL     - try "AUTH SSL" first, then TLS
+     CURLFTPAUTH_TLS     - try "AUTH TLS" first, then SSL
+  */
+  CURLOPT(CURLOPT_FTPSSLAUTH, CURLOPTTYPE_VALUES, 129),
+
+  CURLOPTDEPRECATED(CURLOPT_IOCTLFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 130,
+                    7.18.0, "Use CURLOPT_SEEKFUNCTION"),
+  CURLOPTDEPRECATED(CURLOPT_IOCTLDATA, CURLOPTTYPE_CBPOINT, 131,
+                    7.18.0, "Use CURLOPT_SEEKDATA"),
+
+  /* 132 OBSOLETE. Gone in 7.16.0 */
+  /* 133 OBSOLETE. Gone in 7.16.0 */
+
+  /* null-terminated string for pass on to the FTP server when asked for
+     "account" info */
+  CURLOPT(CURLOPT_FTP_ACCOUNT, CURLOPTTYPE_STRINGPOINT, 134),
+
+  /* feed cookie into cookie engine */
+  CURLOPT(CURLOPT_COOKIELIST, CURLOPTTYPE_STRINGPOINT, 135),
+
+  /* ignore Content-Length */
+  CURLOPT(CURLOPT_IGNORE_CONTENT_LENGTH, CURLOPTTYPE_LONG, 136),
+
+  /* Set to non-zero to skip the IP address received in a 227 PASV FTP server
+     response. Typically used for FTP-SSL purposes but is not restricted to
+     that. libcurl is then instead using the same IP address it used for the
+     control connection. */
+  CURLOPT(CURLOPT_FTP_SKIP_PASV_IP, CURLOPTTYPE_LONG, 137),
+
+  /* Select "file method" to use when doing FTP, see the curl_ftpmethod
+     above. */
+  CURLOPT(CURLOPT_FTP_FILEMETHOD, CURLOPTTYPE_VALUES, 138),
+
+  /* Local port number to bind the socket to */
+  CURLOPT(CURLOPT_LOCALPORT, CURLOPTTYPE_LONG, 139),
+
+  /* Number of ports to try, including the first one set with LOCALPORT.
+     Thus, setting it to 1 makes no additional attempts but the first.
+  */
+  CURLOPT(CURLOPT_LOCALPORTRANGE, CURLOPTTYPE_LONG, 140),
+
+  /* no transfer, set up connection and let application use the socket by
+     extracting it with CURLINFO_LASTSOCKET */
+  CURLOPT(CURLOPT_CONNECT_ONLY, CURLOPTTYPE_LONG, 141),
+
+  /* Function that is called to convert from the
+     network encoding (instead of using the iconv calls in libcurl) */
+  CURLOPTDEPRECATED(CURLOPT_CONV_FROM_NETWORK_FUNCTION,
+                    CURLOPTTYPE_FUNCTIONPOINT, 142,
+                    7.82.0, "Serves no purpose anymore"),
+
+  /* Function that is called to convert to the
+     network encoding (instead of using the iconv calls in libcurl) */
+  CURLOPTDEPRECATED(CURLOPT_CONV_TO_NETWORK_FUNCTION,
+                    CURLOPTTYPE_FUNCTIONPOINT, 143,
+                    7.82.0, "Serves no purpose anymore"),
+
+  /* Function that is called to convert from UTF8
+     (instead of using the iconv calls in libcurl)
+     Note that this is used only for SSL certificate processing */
+  CURLOPTDEPRECATED(CURLOPT_CONV_FROM_UTF8_FUNCTION,
+                    CURLOPTTYPE_FUNCTIONPOINT, 144,
+                    7.82.0, "Serves no purpose anymore"),
+
+  /* if the connection proceeds too quickly then need to slow it down */
+  /* limit-rate: maximum number of bytes per second to send or receive */
+  CURLOPT(CURLOPT_MAX_SEND_SPEED_LARGE, CURLOPTTYPE_OFF_T, 145),
+  CURLOPT(CURLOPT_MAX_RECV_SPEED_LARGE, CURLOPTTYPE_OFF_T, 146),
+
+  /* Pointer to command string to send if USER/PASS fails. */
+  CURLOPT(CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPTTYPE_STRINGPOINT, 147),
+
+  /* callback function for setting socket options */
+  CURLOPT(CURLOPT_SOCKOPTFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 148),
+  CURLOPT(CURLOPT_SOCKOPTDATA, CURLOPTTYPE_CBPOINT, 149),
+
+  /* set to 0 to disable session ID reuse for this transfer, default is
+     enabled (== 1) */
+  CURLOPT(CURLOPT_SSL_SESSIONID_CACHE, CURLOPTTYPE_LONG, 150),
+
+  /* allowed SSH authentication methods */
+  CURLOPT(CURLOPT_SSH_AUTH_TYPES, CURLOPTTYPE_VALUES, 151),
+
+  /* Used by scp/sftp to do public/private key authentication */
+  CURLOPT(CURLOPT_SSH_PUBLIC_KEYFILE, CURLOPTTYPE_STRINGPOINT, 152),
+  CURLOPT(CURLOPT_SSH_PRIVATE_KEYFILE, CURLOPTTYPE_STRINGPOINT, 153),
+
+  /* Send CCC (Clear Command Channel) after authentication */
+  CURLOPT(CURLOPT_FTP_SSL_CCC, CURLOPTTYPE_LONG, 154),
+
+  /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */
+  CURLOPT(CURLOPT_TIMEOUT_MS, CURLOPTTYPE_LONG, 155),
+  CURLOPT(CURLOPT_CONNECTTIMEOUT_MS, CURLOPTTYPE_LONG, 156),
+
+  /* set to zero to disable the libcurl's decoding and thus pass the raw body
+     data to the application even when it is encoded/compressed */
+  CURLOPT(CURLOPT_HTTP_TRANSFER_DECODING, CURLOPTTYPE_LONG, 157),
+  CURLOPT(CURLOPT_HTTP_CONTENT_DECODING, CURLOPTTYPE_LONG, 158),
+
+  /* Permission used when creating new files and directories on the remote
+     server for protocols that support it, SFTP/SCP/FILE */
+  CURLOPT(CURLOPT_NEW_FILE_PERMS, CURLOPTTYPE_LONG, 159),
+  CURLOPT(CURLOPT_NEW_DIRECTORY_PERMS, CURLOPTTYPE_LONG, 160),
+
+  /* Set the behavior of POST when redirecting. Values must be set to one
+     of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */
+  CURLOPT(CURLOPT_POSTREDIR, CURLOPTTYPE_VALUES, 161),
+
+  /* used by scp/sftp to verify the host's public key */
+  CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, CURLOPTTYPE_STRINGPOINT, 162),
+
+  /* Callback function for opening socket (instead of socket(2)). Optionally,
+     callback is able change the address or refuse to connect returning
+     CURL_SOCKET_BAD. The callback should have type
+     curl_opensocket_callback */
+  CURLOPT(CURLOPT_OPENSOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 163),
+  CURLOPT(CURLOPT_OPENSOCKETDATA, CURLOPTTYPE_CBPOINT, 164),
+
+  /* POST volatile input fields. */
+  CURLOPT(CURLOPT_COPYPOSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 165),
+
+  /* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy */
+  CURLOPT(CURLOPT_PROXY_TRANSFER_MODE, CURLOPTTYPE_LONG, 166),
+
+  /* Callback function for seeking in the input stream */
+  CURLOPT(CURLOPT_SEEKFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 167),
+  CURLOPT(CURLOPT_SEEKDATA, CURLOPTTYPE_CBPOINT, 168),
+
+  /* CRL file */
+  CURLOPT(CURLOPT_CRLFILE, CURLOPTTYPE_STRINGPOINT, 169),
+
+  /* Issuer certificate */
+  CURLOPT(CURLOPT_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 170),
+
+  /* (IPv6) Address scope */
+  CURLOPT(CURLOPT_ADDRESS_SCOPE, CURLOPTTYPE_LONG, 171),
+
+  /* Collect certificate chain info and allow it to get retrievable with
+     CURLINFO_CERTINFO after the transfer is complete. */
+  CURLOPT(CURLOPT_CERTINFO, CURLOPTTYPE_LONG, 172),
+
+  /* "name" and "pwd" to use when fetching. */
+  CURLOPT(CURLOPT_USERNAME, CURLOPTTYPE_STRINGPOINT, 173),
+  CURLOPT(CURLOPT_PASSWORD, CURLOPTTYPE_STRINGPOINT, 174),
+
+    /* "name" and "pwd" to use with Proxy when fetching. */
+  CURLOPT(CURLOPT_PROXYUSERNAME, CURLOPTTYPE_STRINGPOINT, 175),
+  CURLOPT(CURLOPT_PROXYPASSWORD, CURLOPTTYPE_STRINGPOINT, 176),
+
+  /* Comma separated list of hostnames defining no-proxy zones. These should
+     match both hostnames directly, and hostnames within a domain. For
+     example, local.com matches local.com and www.local.com, but NOT
+     notlocal.com or www.notlocal.com. For compatibility with other
+     implementations of this, .local.com is considered to be the same as
+     local.com. A single * is the only valid wildcard, and effectively
+     disables the use of proxy. */
+  CURLOPT(CURLOPT_NOPROXY, CURLOPTTYPE_STRINGPOINT, 177),
+
+  /* block size for TFTP transfers */
+  CURLOPT(CURLOPT_TFTP_BLKSIZE, CURLOPTTYPE_LONG, 178),
+
+  /* Socks Service */
+  /* DEPRECATED, do not use! */
+  CURLOPTDEPRECATED(CURLOPT_SOCKS5_GSSAPI_SERVICE,
+                    CURLOPTTYPE_STRINGPOINT, 179,
+                    7.49.0, "Use CURLOPT_PROXY_SERVICE_NAME"),
+
+  /* Socks Service */
+  CURLOPT(CURLOPT_SOCKS5_GSSAPI_NEC, CURLOPTTYPE_LONG, 180),
+
+  /* set the bitmask for the protocols that are allowed to be used for the
+     transfer, which thus helps the app which takes URLs from users or other
+     external inputs and want to restrict what protocol(s) to deal
+     with. Defaults to CURLPROTO_ALL. */
+  CURLOPTDEPRECATED(CURLOPT_PROTOCOLS, CURLOPTTYPE_LONG, 181,
+                    7.85.0, "Use CURLOPT_PROTOCOLS_STR"),
+
+  /* set the bitmask for the protocols that libcurl is allowed to follow to,
+     as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs
+     to be set in both bitmasks to be allowed to get redirected to. */
+  CURLOPTDEPRECATED(CURLOPT_REDIR_PROTOCOLS, CURLOPTTYPE_LONG, 182,
+                    7.85.0, "Use CURLOPT_REDIR_PROTOCOLS_STR"),
+
+  /* set the SSH knownhost filename to use */
+  CURLOPT(CURLOPT_SSH_KNOWNHOSTS, CURLOPTTYPE_STRINGPOINT, 183),
+
+  /* set the SSH host key callback, must point to a curl_sshkeycallback
+     function */
+  CURLOPT(CURLOPT_SSH_KEYFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 184),
+
+  /* set the SSH host key callback custom pointer */
+  CURLOPT(CURLOPT_SSH_KEYDATA, CURLOPTTYPE_CBPOINT, 185),
+
+  /* set the SMTP mail originator */
+  CURLOPT(CURLOPT_MAIL_FROM, CURLOPTTYPE_STRINGPOINT, 186),
+
+  /* set the list of SMTP mail receiver(s) */
+  CURLOPT(CURLOPT_MAIL_RCPT, CURLOPTTYPE_SLISTPOINT, 187),
+
+  /* FTP: send PRET before PASV */
+  CURLOPT(CURLOPT_FTP_USE_PRET, CURLOPTTYPE_LONG, 188),
+
+  /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */
+  CURLOPT(CURLOPT_RTSP_REQUEST, CURLOPTTYPE_VALUES, 189),
+
+  /* The RTSP session identifier */
+  CURLOPT(CURLOPT_RTSP_SESSION_ID, CURLOPTTYPE_STRINGPOINT, 190),
+
+  /* The RTSP stream URI */
+  CURLOPT(CURLOPT_RTSP_STREAM_URI, CURLOPTTYPE_STRINGPOINT, 191),
+
+  /* The Transport: header to use in RTSP requests */
+  CURLOPT(CURLOPT_RTSP_TRANSPORT, CURLOPTTYPE_STRINGPOINT, 192),
+
+  /* Manually initialize the client RTSP CSeq for this handle */
+  CURLOPT(CURLOPT_RTSP_CLIENT_CSEQ, CURLOPTTYPE_LONG, 193),
+
+  /* Manually initialize the server RTSP CSeq for this handle */
+  CURLOPT(CURLOPT_RTSP_SERVER_CSEQ, CURLOPTTYPE_LONG, 194),
+
+  /* The stream to pass to INTERLEAVEFUNCTION. */
+  CURLOPT(CURLOPT_INTERLEAVEDATA, CURLOPTTYPE_CBPOINT, 195),
+
+  /* Let the application define a custom write method for RTP data */
+  CURLOPT(CURLOPT_INTERLEAVEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 196),
+
+  /* Turn on wildcard matching */
+  CURLOPT(CURLOPT_WILDCARDMATCH, CURLOPTTYPE_LONG, 197),
+
+  /* Directory matching callback called before downloading of an
+     individual file (chunk) started */
+  CURLOPT(CURLOPT_CHUNK_BGN_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 198),
+
+  /* Directory matching callback called after the file (chunk)
+     was downloaded, or skipped */
+  CURLOPT(CURLOPT_CHUNK_END_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 199),
+
+  /* Change match (fnmatch-like) callback for wildcard matching */
+  CURLOPT(CURLOPT_FNMATCH_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 200),
+
+  /* Let the application define custom chunk data pointer */
+  CURLOPT(CURLOPT_CHUNK_DATA, CURLOPTTYPE_CBPOINT, 201),
+
+  /* FNMATCH_FUNCTION user pointer */
+  CURLOPT(CURLOPT_FNMATCH_DATA, CURLOPTTYPE_CBPOINT, 202),
+
+  /* send linked-list of name:port:address sets */
+  CURLOPT(CURLOPT_RESOLVE, CURLOPTTYPE_SLISTPOINT, 203),
+
+  /* Set a username for authenticated TLS */
+  CURLOPT(CURLOPT_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 204),
+
+  /* Set a password for authenticated TLS */
+  CURLOPT(CURLOPT_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 205),
+
+  /* Set authentication type for authenticated TLS */
+  CURLOPT(CURLOPT_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 206),
+
+  /* Set to 1 to enable the "TE:" header in HTTP requests to ask for
+     compressed transfer-encoded responses. Set to 0 to disable the use of TE:
+     in outgoing requests. The current default is 0, but it might change in a
+     future libcurl release.
+
+     libcurl asks for the compressed methods it knows of, and if that
+     is not any, it does not ask for transfer-encoding at all even if this
+     option is set to 1. */
+  CURLOPT(CURLOPT_TRANSFER_ENCODING, CURLOPTTYPE_LONG, 207),
+
+  /* Callback function for closing socket (instead of close(2)). The callback
+     should have type curl_closesocket_callback */
+  CURLOPT(CURLOPT_CLOSESOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 208),
+  CURLOPT(CURLOPT_CLOSESOCKETDATA, CURLOPTTYPE_CBPOINT, 209),
+
+  /* allow GSSAPI credential delegation */
+  CURLOPT(CURLOPT_GSSAPI_DELEGATION, CURLOPTTYPE_VALUES, 210),
+
+  /* Set the name servers to use for DNS resolution.
+   * Only supported by the c-ares DNS backend */
+  CURLOPT(CURLOPT_DNS_SERVERS, CURLOPTTYPE_STRINGPOINT, 211),
+
+  /* Time-out accept operations (currently for FTP only) after this amount
+     of milliseconds. */
+  CURLOPT(CURLOPT_ACCEPTTIMEOUT_MS, CURLOPTTYPE_LONG, 212),
+
+  /* Set TCP keepalive */
+  CURLOPT(CURLOPT_TCP_KEEPALIVE, CURLOPTTYPE_LONG, 213),
+
+  /* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */
+  CURLOPT(CURLOPT_TCP_KEEPIDLE, CURLOPTTYPE_LONG, 214),
+  CURLOPT(CURLOPT_TCP_KEEPINTVL, CURLOPTTYPE_LONG, 215),
+
+  /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */
+  CURLOPT(CURLOPT_SSL_OPTIONS, CURLOPTTYPE_VALUES, 216),
+
+  /* Set the SMTP auth originator */
+  CURLOPT(CURLOPT_MAIL_AUTH, CURLOPTTYPE_STRINGPOINT, 217),
+
+  /* Enable/disable SASL initial response */
+  CURLOPT(CURLOPT_SASL_IR, CURLOPTTYPE_LONG, 218),
+
+  /* Function that is called instead of the internal progress display
+   * function. This function should be defined as the curl_xferinfo_callback
+   * prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */
+  CURLOPT(CURLOPT_XFERINFOFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 219),
+
+  /* The XOAUTH2 bearer token */
+  CURLOPT(CURLOPT_XOAUTH2_BEARER, CURLOPTTYPE_STRINGPOINT, 220),
+
+  /* Set the interface string to use as outgoing network
+   * interface for DNS requests.
+   * Only supported by the c-ares DNS backend */
+  CURLOPT(CURLOPT_DNS_INTERFACE, CURLOPTTYPE_STRINGPOINT, 221),
+
+  /* Set the local IPv4 address to use for outgoing DNS requests.
+   * Only supported by the c-ares DNS backend */
+  CURLOPT(CURLOPT_DNS_LOCAL_IP4, CURLOPTTYPE_STRINGPOINT, 222),
+
+  /* Set the local IPv6 address to use for outgoing DNS requests.
+   * Only supported by the c-ares DNS backend */
+  CURLOPT(CURLOPT_DNS_LOCAL_IP6, CURLOPTTYPE_STRINGPOINT, 223),
+
+  /* Set authentication options directly */
+  CURLOPT(CURLOPT_LOGIN_OPTIONS, CURLOPTTYPE_STRINGPOINT, 224),
+
+  /* Enable/disable TLS NPN extension (http2 over SSL might fail without) */
+  CURLOPTDEPRECATED(CURLOPT_SSL_ENABLE_NPN, CURLOPTTYPE_LONG, 225,
+                    7.86.0, "Has no function"),
+
+  /* Enable/disable TLS ALPN extension (http2 over SSL might fail without) */
+  CURLOPT(CURLOPT_SSL_ENABLE_ALPN, CURLOPTTYPE_LONG, 226),
+
+  /* Time to wait for a response to an HTTP request containing an
+   * Expect: 100-continue header before sending the data anyway. */
+  CURLOPT(CURLOPT_EXPECT_100_TIMEOUT_MS, CURLOPTTYPE_LONG, 227),
+
+  /* This points to a linked list of headers used for proxy requests only,
+     struct curl_slist kind */
+  CURLOPT(CURLOPT_PROXYHEADER, CURLOPTTYPE_SLISTPOINT, 228),
+
+  /* Pass in a bitmask of "header options" */
+  CURLOPT(CURLOPT_HEADEROPT, CURLOPTTYPE_VALUES, 229),
+
+  /* The public key used to validate the peer public key */
+  CURLOPT(CURLOPT_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 230),
+
+  /* Path to Unix domain socket */
+  CURLOPT(CURLOPT_UNIX_SOCKET_PATH, CURLOPTTYPE_STRINGPOINT, 231),
+
+  /* Set if we should verify the certificate status. */
+  CURLOPT(CURLOPT_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 232),
+
+  /* Set if we should enable TLS false start. */
+  CURLOPTDEPRECATED(CURLOPT_SSL_FALSESTART, CURLOPTTYPE_LONG, 233,
+                    8.15.0, "Has no function"),
+
+  /* Do not squash dot-dot sequences */
+  CURLOPT(CURLOPT_PATH_AS_IS, CURLOPTTYPE_LONG, 234),
+
+  /* Proxy Service Name */
+  CURLOPT(CURLOPT_PROXY_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 235),
+
+  /* Service Name */
+  CURLOPT(CURLOPT_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 236),
+
+  /* Wait/do not wait for pipe/mutex to clarify */
+  CURLOPT(CURLOPT_PIPEWAIT, CURLOPTTYPE_LONG, 237),
+
+  /* Set the protocol used when curl is given a URL without a protocol */
+  CURLOPT(CURLOPT_DEFAULT_PROTOCOL, CURLOPTTYPE_STRINGPOINT, 238),
+
+  /* Set stream weight, 1 - 256 (default is 16) */
+  CURLOPT(CURLOPT_STREAM_WEIGHT, CURLOPTTYPE_LONG, 239),
+
+  /* Set stream dependency on another curl handle */
+  CURLOPTDEPRECATED(CURLOPT_STREAM_DEPENDS, CURLOPTTYPE_OBJECTPOINT, 240,
+                    8.21.0, "Has no function"),
+
+  /* Set E-xclusive stream dependency on another curl handle */
+  CURLOPTDEPRECATED(CURLOPT_STREAM_DEPENDS_E, CURLOPTTYPE_OBJECTPOINT, 241,
+                    8.21.0, "Has no function"),
+
+  /* Do not send any tftp option requests to the server */
+  CURLOPT(CURLOPT_TFTP_NO_OPTIONS, CURLOPTTYPE_LONG, 242),
+
+  /* Linked-list of host:port:connect-to-host:connect-to-port,
+     overrides the URL's host:port (only for the network layer) */
+  CURLOPT(CURLOPT_CONNECT_TO, CURLOPTTYPE_SLISTPOINT, 243),
+
+  /* Set TCP Fast Open */
+  CURLOPT(CURLOPT_TCP_FASTOPEN, CURLOPTTYPE_LONG, 244),
+
+  /* Continue to send data if the server responds early with an
+   * HTTP status code >= 300 */
+  CURLOPT(CURLOPT_KEEP_SENDING_ON_ERROR, CURLOPTTYPE_LONG, 245),
+
+  /* The CApath or CAfile used to validate the proxy certificate
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_CAINFO, CURLOPTTYPE_STRINGPOINT, 246),
+
+  /* The CApath directory used to validate the proxy certificate
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_CAPATH, CURLOPTTYPE_STRINGPOINT, 247),
+
+  /* Set if we should verify the proxy in SSL handshake,
+     set 1 to verify. */
+  CURLOPT(CURLOPT_PROXY_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 248),
+
+  /* Set if we should verify the Common name from the proxy certificate in SSL
+   * handshake, set 1 to check existence, 2 to ensure that it matches
+   * the provided hostname. */
+  CURLOPT(CURLOPT_PROXY_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 249),
+
+  /* What version to specifically try to use for proxy.
+     See CURL_SSLVERSION defines below. */
+  CURLOPT(CURLOPT_PROXY_SSLVERSION, CURLOPTTYPE_VALUES, 250),
+
+  /* Set a username for authenticated TLS for proxy */
+  CURLOPT(CURLOPT_PROXY_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 251),
+
+  /* Set a password for authenticated TLS for proxy */
+  CURLOPT(CURLOPT_PROXY_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 252),
+
+  /* Set authentication type for authenticated TLS for proxy */
+  CURLOPT(CURLOPT_PROXY_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 253),
+
+  /* name of the file keeping your private SSL-certificate for proxy */
+  CURLOPT(CURLOPT_PROXY_SSLCERT, CURLOPTTYPE_STRINGPOINT, 254),
+
+  /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") for
+     proxy */
+  CURLOPT(CURLOPT_PROXY_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 255),
+
+  /* name of the file keeping your private SSL-key for proxy */
+  CURLOPT(CURLOPT_PROXY_SSLKEY, CURLOPTTYPE_STRINGPOINT, 256),
+
+  /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") for
+     proxy */
+  CURLOPT(CURLOPT_PROXY_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 257),
+
+  /* password for the SSL private key for proxy */
+  CURLOPT(CURLOPT_PROXY_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 258),
+
+  /* Specify which TLS 1.2 (1.1, 1.0) ciphers to use for proxy */
+  CURLOPT(CURLOPT_PROXY_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 259),
+
+  /* CRL file for proxy */
+  CURLOPT(CURLOPT_PROXY_CRLFILE, CURLOPTTYPE_STRINGPOINT, 260),
+
+  /* Enable/disable specific SSL features with a bitmask for proxy, see
+     CURLSSLOPT_* */
+  CURLOPT(CURLOPT_PROXY_SSL_OPTIONS, CURLOPTTYPE_LONG, 261),
+
+  /* Name of pre proxy to use. */
+  CURLOPT(CURLOPT_PRE_PROXY, CURLOPTTYPE_STRINGPOINT, 262),
+
+  /* The public key in DER form used to validate the proxy public key
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 263),
+
+  /* Path to an abstract Unix domain socket */
+  CURLOPT(CURLOPT_ABSTRACT_UNIX_SOCKET, CURLOPTTYPE_STRINGPOINT, 264),
+
+  /* Suppress proxy CONNECT response headers from user callbacks */
+  CURLOPT(CURLOPT_SUPPRESS_CONNECT_HEADERS, CURLOPTTYPE_LONG, 265),
+
+  /* The request target, instead of extracted from the URL */
+  CURLOPT(CURLOPT_REQUEST_TARGET, CURLOPTTYPE_STRINGPOINT, 266),
+
+  /* bitmask of allowed auth methods for connections to SOCKS5 proxies */
+  CURLOPT(CURLOPT_SOCKS5_AUTH, CURLOPTTYPE_LONG, 267),
+
+  /* Enable/disable SSH compression */
+  CURLOPT(CURLOPT_SSH_COMPRESSION, CURLOPTTYPE_LONG, 268),
+
+  /* Post MIME data. */
+  CURLOPT(CURLOPT_MIMEPOST, CURLOPTTYPE_OBJECTPOINT, 269),
+
+  /* Time to use with the CURLOPT_TIMECONDITION. Specified in number of
+     seconds since 1 Jan 1970. */
+  CURLOPT(CURLOPT_TIMEVALUE_LARGE, CURLOPTTYPE_OFF_T, 270),
+
+  /* Head start in milliseconds to give happy eyeballs. */
+  CURLOPT(CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS, CURLOPTTYPE_LONG, 271),
+
+  /* Function that is called before a resolver request is made */
+  CURLOPT(CURLOPT_RESOLVER_START_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 272),
+
+  /* User data to pass to the resolver start callback. */
+  CURLOPT(CURLOPT_RESOLVER_START_DATA, CURLOPTTYPE_CBPOINT, 273),
+
+  /* send HAProxy PROXY protocol header? */
+  CURLOPT(CURLOPT_HAPROXYPROTOCOL, CURLOPTTYPE_LONG, 274),
+
+  /* shuffle addresses before use when DNS returns multiple */
+  CURLOPT(CURLOPT_DNS_SHUFFLE_ADDRESSES, CURLOPTTYPE_LONG, 275),
+
+  /* Specify which TLS 1.3 ciphers suites to use */
+  CURLOPT(CURLOPT_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 276),
+  CURLOPT(CURLOPT_PROXY_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 277),
+
+  /* Disallow specifying username/login in URL. */
+  CURLOPT(CURLOPT_DISALLOW_USERNAME_IN_URL, CURLOPTTYPE_LONG, 278),
+
+  /* DNS-over-HTTPS URL */
+  CURLOPT(CURLOPT_DOH_URL, CURLOPTTYPE_STRINGPOINT, 279),
+
+  /* Preferred buffer size to use for uploads */
+  CURLOPT(CURLOPT_UPLOAD_BUFFERSIZE, CURLOPTTYPE_LONG, 280),
+
+  /* Time in ms between connection upkeep calls for long-lived connections. */
+  CURLOPT(CURLOPT_UPKEEP_INTERVAL_MS, CURLOPTTYPE_LONG, 281),
+
+  /* Specify URL using CURL URL API. */
+  CURLOPT(CURLOPT_CURLU, CURLOPTTYPE_OBJECTPOINT, 282),
+
+  /* add trailing data after no more data is available */
+  CURLOPT(CURLOPT_TRAILERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 283),
+
+  /* pointer to be passed to HTTP_TRAILER_FUNCTION */
+  CURLOPT(CURLOPT_TRAILERDATA, CURLOPTTYPE_CBPOINT, 284),
+
+  /* set this to 1L to allow HTTP/0.9 responses or 0L to disallow */
+  CURLOPT(CURLOPT_HTTP09_ALLOWED, CURLOPTTYPE_LONG, 285),
+
+  /* alt-svc control bitmask */
+  CURLOPT(CURLOPT_ALTSVC_CTRL, CURLOPTTYPE_LONG, 286),
+
+  /* alt-svc cache filename to possibly read from/write to */
+  CURLOPT(CURLOPT_ALTSVC, CURLOPTTYPE_STRINGPOINT, 287),
+
+  /* maximum age (idle time) of a connection to consider it for reuse
+   * (in seconds) */
+  CURLOPT(CURLOPT_MAXAGE_CONN, CURLOPTTYPE_LONG, 288),
+
+  /* SASL authorization identity */
+  CURLOPT(CURLOPT_SASL_AUTHZID, CURLOPTTYPE_STRINGPOINT, 289),
+
+  /* allow RCPT TO command to fail for some recipients */
+  CURLOPT(CURLOPT_MAIL_RCPT_ALLOWFAILS, CURLOPTTYPE_LONG, 290),
+
+  /* the private SSL-certificate as a "blob" */
+  CURLOPT(CURLOPT_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 291),
+  CURLOPT(CURLOPT_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 292),
+  CURLOPT(CURLOPT_PROXY_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 293),
+  CURLOPT(CURLOPT_PROXY_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 294),
+  CURLOPT(CURLOPT_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 295),
+
+  /* Issuer certificate for proxy */
+  CURLOPT(CURLOPT_PROXY_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 296),
+  CURLOPT(CURLOPT_PROXY_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 297),
+
+  /* the EC curves requested by the TLS client (RFC 8422, 5.1);
+   * OpenSSL support via 'set_groups'/'set_curves':
+   * https://docs.openssl.org/master/man3/SSL_CTX_set1_curves/
+   */
+  CURLOPT(CURLOPT_SSL_EC_CURVES, CURLOPTTYPE_STRINGPOINT, 298),
+
+  /* HSTS bitmask */
+  CURLOPT(CURLOPT_HSTS_CTRL, CURLOPTTYPE_LONG, 299),
+  /* HSTS filename */
+  CURLOPT(CURLOPT_HSTS, CURLOPTTYPE_STRINGPOINT, 300),
+
+  /* HSTS read callback */
+  CURLOPT(CURLOPT_HSTSREADFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 301),
+  CURLOPT(CURLOPT_HSTSREADDATA, CURLOPTTYPE_CBPOINT, 302),
+
+  /* HSTS write callback */
+  CURLOPT(CURLOPT_HSTSWRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 303),
+  CURLOPT(CURLOPT_HSTSWRITEDATA, CURLOPTTYPE_CBPOINT, 304),
+
+  /* Parameters for V4 signature */
+  CURLOPT(CURLOPT_AWS_SIGV4, CURLOPTTYPE_STRINGPOINT, 305),
+
+  /* Same as CURLOPT_SSL_VERIFYPEER but for DoH (DNS-over-HTTPS) servers. */
+  CURLOPT(CURLOPT_DOH_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 306),
+
+  /* Same as CURLOPT_SSL_VERIFYHOST but for DoH (DNS-over-HTTPS) servers. */
+  CURLOPT(CURLOPT_DOH_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 307),
+
+  /* Same as CURLOPT_SSL_VERIFYSTATUS but for DoH (DNS-over-HTTPS) servers. */
+  CURLOPT(CURLOPT_DOH_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 308),
+
+  /* The CA certificates as "blob" used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_CAINFO_BLOB, CURLOPTTYPE_BLOB, 309),
+
+  /* The CA certificates as "blob" used to validate the proxy certificate
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_CAINFO_BLOB, CURLOPTTYPE_BLOB, 310),
+
+  /* used by scp/sftp to verify the host's public key */
+  CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256, CURLOPTTYPE_STRINGPOINT, 311),
+
+  /* Function that is called immediately before the initial request
+     is made on a connection (after any protocol negotiation step). */
+  CURLOPT(CURLOPT_PREREQFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 312),
+
+  /* Data passed to the CURLOPT_PREREQFUNCTION callback */
+  CURLOPT(CURLOPT_PREREQDATA, CURLOPTTYPE_CBPOINT, 313),
+
+  /* maximum age (since creation) of a connection to consider it for reuse
+   * (in seconds) */
+  CURLOPT(CURLOPT_MAXLIFETIME_CONN, CURLOPTTYPE_LONG, 314),
+
+  /* Set MIME option flags. */
+  CURLOPT(CURLOPT_MIME_OPTIONS, CURLOPTTYPE_LONG, 315),
+
+  /* set the SSH host key callback, must point to a curl_sshkeycallback
+     function */
+  CURLOPT(CURLOPT_SSH_HOSTKEYFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 316),
+
+  /* set the SSH host key callback custom pointer */
+  CURLOPT(CURLOPT_SSH_HOSTKEYDATA, CURLOPTTYPE_CBPOINT, 317),
+
+  /* specify which protocols that are allowed to be used for the transfer,
+     which thus helps the app which takes URLs from users or other external
+     inputs and want to restrict what protocol(s) to deal with. Defaults to
+     all built-in protocols. */
+  CURLOPT(CURLOPT_PROTOCOLS_STR, CURLOPTTYPE_STRINGPOINT, 318),
+
+  /* specify which protocols that libcurl is allowed to follow directs to */
+  CURLOPT(CURLOPT_REDIR_PROTOCOLS_STR, CURLOPTTYPE_STRINGPOINT, 319),
+
+  /* WebSockets options */
+  CURLOPT(CURLOPT_WS_OPTIONS, CURLOPTTYPE_LONG, 320),
+
+  /* CA cache timeout */
+  CURLOPT(CURLOPT_CA_CACHE_TIMEOUT, CURLOPTTYPE_LONG, 321),
+
+  /* Can leak things, gonna exit() soon */
+  CURLOPT(CURLOPT_QUICK_EXIT, CURLOPTTYPE_LONG, 322),
+
+  /* set a specific client IP for HAProxy PROXY protocol header? */
+  CURLOPT(CURLOPT_HAPROXY_CLIENT_IP, CURLOPTTYPE_STRINGPOINT, 323),
+
+  /* millisecond version */
+  CURLOPT(CURLOPT_SERVER_RESPONSE_TIMEOUT_MS, CURLOPTTYPE_LONG, 324),
+
+  /* set ECH configuration */
+  CURLOPT(CURLOPT_ECH, CURLOPTTYPE_STRINGPOINT, 325),
+
+  /* maximum number of keepalive probes (Linux, *BSD, macOS, etc.) */
+  CURLOPT(CURLOPT_TCP_KEEPCNT, CURLOPTTYPE_LONG, 326),
+
+  CURLOPT(CURLOPT_UPLOAD_FLAGS, CURLOPTTYPE_LONG, 327),
+
+  /* set TLS supported signature algorithms */
+  CURLOPT(CURLOPT_SSL_SIGNATURE_ALGORITHMS, CURLOPTTYPE_STRINGPOINT, 328),
+
+  CURLOPT_LASTENTRY /* the last unused */
+} CURLoption;
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+                          the obsolete stuff removed! */
+
+/* Backwards compatibility with older names */
+/* These are scheduled to disappear by 2011 */
+
+/* This was added in version 7.19.1 */
+#define CURLOPT_POST301 CURLOPT_POSTREDIR
+
+/* These are scheduled to disappear by 2009 */
+
+/* The following were added in 7.17.0 */
+#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD
+#define CURLOPT_FTPAPPEND CURLOPT_APPEND
+#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY
+#define CURLOPT_FTP_SSL CURLOPT_USE_SSL
+
+/* The following were added earlier */
+
+#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD
+#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL
+
+#define CURLOPT_FTP_RESPONSE_TIMEOUT CURLOPT_SERVER_RESPONSE_TIMEOUT
+
+/* Added in 8.2.0 */
+#define CURLOPT_MAIL_RCPT_ALLLOWFAILS CURLOPT_MAIL_RCPT_ALLOWFAILS
+
+#else
+/* This is set if CURL_NO_OLDIES is defined at compile-time */
+#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */
+#endif
+
+/* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host
+   name resolves addresses using more than one IP protocol version, this
+   option might be handy to force libcurl to use a specific IP version. */
+#define CURL_IPRESOLVE_WHATEVER 0L /* default, uses addresses to all IP
+                                     versions that your system allows */
+#define CURL_IPRESOLVE_V4       1L /* uses only IPv4 addresses/connections */
+#define CURL_IPRESOLVE_V6       2L /* uses only IPv6 addresses/connections */
+
+  /* Convenient "aliases" */
+#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER
+
+/* These constants are for use with the CURLOPT_HTTP_VERSION option. */
+#define CURL_HTTP_VERSION_NONE  0L /* setting this means we do not care, and
+                                      that we would like the library to choose
+                                      the best possible for us! */
+#define CURL_HTTP_VERSION_1_0   1L /* please use HTTP 1.0 in the request */
+#define CURL_HTTP_VERSION_1_1   2L /* please use HTTP 1.1 in the request */
+#define CURL_HTTP_VERSION_2_0   3L /* please use HTTP 2 in the request */
+#define CURL_HTTP_VERSION_2TLS  4L /* use version 2 for HTTPS, version 1.1 for
+                                      HTTP */
+#define CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE 5L /* please use HTTP 2 without
+                                                  HTTP/1.1 Upgrade */
+#define CURL_HTTP_VERSION_3     30L /* Use HTTP/3, fallback to HTTP/2 or
+                                       HTTP/1 if needed. For HTTPS only. For
+                                       HTTP, this option makes libcurl
+                                       return error. */
+#define CURL_HTTP_VERSION_3ONLY 31L /* Use HTTP/3 without fallback. For
+                                       HTTPS only. For HTTP, this makes
+                                       libcurl return error. */
+#define CURL_HTTP_VERSION_LAST  32L /* *ILLEGAL* http version */
+
+/* Convenience definition simple because the name of the version is HTTP/2 and
+   not 2.0. The 2_0 version of the enum name was set while the version was
+   still planned to be 2.0 and we stick to it for compatibility. */
+#define CURL_HTTP_VERSION_2 CURL_HTTP_VERSION_2_0
+
+/*
+ * Public API enums for RTSP requests
+ */
+
+#define CURL_RTSPREQ_NONE          0L
+#define CURL_RTSPREQ_OPTIONS       1L
+#define CURL_RTSPREQ_DESCRIBE      2L
+#define CURL_RTSPREQ_ANNOUNCE      3L
+#define CURL_RTSPREQ_SETUP         4L
+#define CURL_RTSPREQ_PLAY          5L
+#define CURL_RTSPREQ_PAUSE         6L
+#define CURL_RTSPREQ_TEARDOWN      7L
+#define CURL_RTSPREQ_GET_PARAMETER 8L
+#define CURL_RTSPREQ_SET_PARAMETER 9L
+#define CURL_RTSPREQ_RECORD        10L
+#define CURL_RTSPREQ_RECEIVE       11L
+#define CURL_RTSPREQ_LAST          12L /* not used */
+
+  /* These enums are for use with the CURLOPT_NETRC option. */
+#define CURL_NETRC_IGNORED  0L /* The .netrc is never read.
+                                  This is the default. */
+#define CURL_NETRC_OPTIONAL 1L /* A user:password in the URL is preferred
+                                  to one in the .netrc. */
+#define CURL_NETRC_REQUIRED 2L /* A user:password in the URL is ignored.
+                                  Unless one is set programmatically, the
+                                  .netrc is queried. */
+enum CURL_NETRC_OPTION {
+  /* we set a single member here, to make sure we still provide the enum, but
+     the values to use are defined above with L suffixes */
+  CURL_NETRC_LAST = 3
+};
+
+#define CURL_SSLVERSION_DEFAULT 0L
+#define CURL_SSLVERSION_TLSv1   1L /* TLS 1.x */
+#define CURL_SSLVERSION_SSLv2   2L
+#define CURL_SSLVERSION_SSLv3   3L
+#define CURL_SSLVERSION_TLSv1_0 4L
+#define CURL_SSLVERSION_TLSv1_1 5L
+#define CURL_SSLVERSION_TLSv1_2 6L
+#define CURL_SSLVERSION_TLSv1_3 7L
+
+#define CURL_SSLVERSION_LAST    8L /* never use, keep last */
+
+#define CURL_SSLVERSION_MAX_NONE 0L
+#define CURL_SSLVERSION_MAX_DEFAULT (CURL_SSLVERSION_TLSv1   << 16)
+#define CURL_SSLVERSION_MAX_TLSv1_0 (CURL_SSLVERSION_TLSv1_0 << 16)
+#define CURL_SSLVERSION_MAX_TLSv1_1 (CURL_SSLVERSION_TLSv1_1 << 16)
+#define CURL_SSLVERSION_MAX_TLSv1_2 (CURL_SSLVERSION_TLSv1_2 << 16)
+#define CURL_SSLVERSION_MAX_TLSv1_3 (CURL_SSLVERSION_TLSv1_3 << 16)
+
+/* never use, keep last */
+#define CURL_SSLVERSION_MAX_LAST    (CURL_SSLVERSION_LAST    << 16)
+
+#define CURL_TLSAUTH_NONE 0L
+#define CURL_TLSAUTH_SRP  1L
+
+enum CURL_TLSAUTH {
+  /* we set a single member here, to make sure we still provide the enum,
+     but the values to use are defined above with L suffixes */
+  CURL_TLSAUTH_LAST = 2
+};
+
+/* symbols to use with CURLOPT_POSTREDIR.
+   CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303
+   can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302
+   | CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */
+
+#define CURL_REDIR_GET_ALL  0L
+#define CURL_REDIR_POST_301 1L
+#define CURL_REDIR_POST_302 2L
+#define CURL_REDIR_POST_303 4L
+#define CURL_REDIR_POST_ALL \
+  (CURL_REDIR_POST_301 | CURL_REDIR_POST_302 | CURL_REDIR_POST_303)
+
+#define CURL_TIMECOND_NONE         0L
+#define CURL_TIMECOND_IFMODSINCE   1L
+#define CURL_TIMECOND_IFUNMODSINCE 2L
+#define CURL_TIMECOND_LASTMOD      3L
+
+typedef enum {
+  /* we set a single member here, to make sure we still provide
+     the enum typedef, but the values to use are defined above with L
+     suffixes */
+  CURL_TIMECOND_LAST = 4
+} curl_TimeCond;
+
+/* Special size_t value signaling a null-terminated string. */
+#define CURL_ZERO_TERMINATED ((size_t)-1)
+
+/* curl_strequal() and curl_strnequal() are subject for removal in a future
+   release */
+CURL_EXTERN int curl_strequal(const char *s1, const char *s2);
+CURL_EXTERN int curl_strnequal(const char *s1, const char *s2, size_t n);
+
+/* Mime/form handling support. */
+typedef struct curl_mime      curl_mime;      /* Mime context. */
+typedef struct curl_mimepart  curl_mimepart;  /* Mime part context. */
+
+/* CURLMIMEOPT_ defines are for the CURLOPT_MIME_OPTIONS option. */
+#define CURLMIMEOPT_FORMESCAPE (1L << 0) /* Use backslash-escaping for forms */
+
+/*
+ * NAME curl_mime_init()
+ *
+ * DESCRIPTION
+ *
+ * Create a mime context and return its handle. The easy parameter is the
+ * target handle.
+ */
+CURL_EXTERN curl_mime *curl_mime_init(CURL *easy);
+
+/*
+ * NAME curl_mime_free()
+ *
+ * DESCRIPTION
+ *
+ * release a mime handle and its substructures.
+ */
+CURL_EXTERN void curl_mime_free(curl_mime *mime);
+
+/*
+ * NAME curl_mime_addpart()
+ *
+ * DESCRIPTION
+ *
+ * Append a new empty part to the given mime context and return a handle to
+ * the created part.
+ */
+CURL_EXTERN curl_mimepart *curl_mime_addpart(curl_mime *mime);
+
+/*
+ * NAME curl_mime_name()
+ *
+ * DESCRIPTION
+ *
+ * Set mime/form part name.
+ */
+CURL_EXTERN CURLcode curl_mime_name(curl_mimepart *part, const char *name);
+
+/*
+ * NAME curl_mime_filename()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part remote filename.
+ */
+CURL_EXTERN CURLcode curl_mime_filename(curl_mimepart *part,
+                                        const char *filename);
+
+/*
+ * NAME curl_mime_type()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part type.
+ */
+CURL_EXTERN CURLcode curl_mime_type(curl_mimepart *part, const char *mimetype);
+
+/*
+ * NAME curl_mime_encoder()
+ *
+ * DESCRIPTION
+ *
+ * Set mime data transfer encoder.
+ */
+CURL_EXTERN CURLcode curl_mime_encoder(curl_mimepart *part,
+                                       const char *encoding);
+
+/*
+ * NAME curl_mime_data()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from memory data,
+ */
+CURL_EXTERN CURLcode curl_mime_data(curl_mimepart *part,
+                                    const char *data, size_t datasize);
+
+/*
+ * NAME curl_mime_filedata()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from named file.
+ */
+CURL_EXTERN CURLcode curl_mime_filedata(curl_mimepart *part,
+                                        const char *filename);
+
+/*
+ * NAME curl_mime_data_cb()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from callback function.
+ */
+CURL_EXTERN CURLcode curl_mime_data_cb(curl_mimepart *part,
+                                       curl_off_t datasize,
+                                       curl_read_callback readfunc,
+                                       curl_seek_callback seekfunc,
+                                       curl_free_callback freefunc,
+                                       void *arg);
+
+/*
+ * NAME curl_mime_subparts()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from subparts.
+ */
+CURL_EXTERN CURLcode curl_mime_subparts(curl_mimepart *part,
+                                        curl_mime *subparts);
+/*
+ * NAME curl_mime_headers()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part headers.
+ */
+CURL_EXTERN CURLcode curl_mime_headers(curl_mimepart *part,
+                                       struct curl_slist *headers,
+                                       int take_ownership);
+
+typedef enum {
+  /********* the first one is unused ************/
+  CURLFORM_NOTHING         CURL_DEPRECATED(7.56.0, ""),
+  CURLFORM_COPYNAME        CURL_DEPRECATED(7.56.0, "Use curl_mime_name()"),
+  CURLFORM_PTRNAME         CURL_DEPRECATED(7.56.0, "Use curl_mime_name()"),
+  CURLFORM_NAMELENGTH      CURL_DEPRECATED(7.56.0, ""),
+  CURLFORM_COPYCONTENTS    CURL_DEPRECATED(7.56.0, "Use curl_mime_data()"),
+  CURLFORM_PTRCONTENTS     CURL_DEPRECATED(7.56.0, "Use curl_mime_data()"),
+  CURLFORM_CONTENTSLENGTH  CURL_DEPRECATED(7.56.0, "Use curl_mime_data()"),
+  CURLFORM_FILECONTENT     CURL_DEPRECATED(7.56.0, "Use curl_mime_data_cb()"),
+  CURLFORM_ARRAY           CURL_DEPRECATED(7.56.0, ""),
+  CURLFORM_OBSOLETE,
+  CURLFORM_FILE            CURL_DEPRECATED(7.56.0, "Use curl_mime_filedata()"),
+
+  CURLFORM_BUFFER          CURL_DEPRECATED(7.56.0, "Use curl_mime_filename()"),
+  CURLFORM_BUFFERPTR       CURL_DEPRECATED(7.56.0, "Use curl_mime_data()"),
+  CURLFORM_BUFFERLENGTH    CURL_DEPRECATED(7.56.0, "Use curl_mime_data()"),
+
+  CURLFORM_CONTENTTYPE     CURL_DEPRECATED(7.56.0, "Use curl_mime_type()"),
+  CURLFORM_CONTENTHEADER   CURL_DEPRECATED(7.56.0, "Use curl_mime_headers()"),
+  CURLFORM_FILENAME        CURL_DEPRECATED(7.56.0, "Use curl_mime_filename()"),
+  CURLFORM_END,
+  CURLFORM_OBSOLETE2,
+
+  CURLFORM_STREAM          CURL_DEPRECATED(7.56.0, "Use curl_mime_data_cb()"),
+  CURLFORM_CONTENTLEN  /* added in 7.46.0, provide a curl_off_t length */
+                           CURL_DEPRECATED(7.56.0, "Use curl_mime_data()"),
+
+  CURLFORM_LASTENTRY /* the last unused */
+} CURLformoption;
+
+/* structure to be used as parameter for CURLFORM_ARRAY */
+struct curl_forms {
+  CURLformoption option;
+  const char     *value;
+};
+
+/* use this for multipart formpost building */
+/* Returns code for curl_formadd()
+ *
+ * Returns:
+ * CURL_FORMADD_OK             on success
+ * CURL_FORMADD_MEMORY         if the FormInfo allocation fails
+ * CURL_FORMADD_OPTION_TWICE   if one option is given twice for one Form
+ * CURL_FORMADD_NULL           if a null pointer was given for a char
+ * CURL_FORMADD_MEMORY         if the allocation of a FormInfo struct failed
+ * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used
+ * CURL_FORMADD_INCOMPLETE     if the some FormInfo is not complete (or error)
+ * CURL_FORMADD_MEMORY         if a curl_httppost struct cannot be allocated
+ * CURL_FORMADD_MEMORY         if some allocation for string copying failed.
+ * CURL_FORMADD_ILLEGAL_ARRAY  if an illegal option is used in an array
+ *
+ ***************************************************************************/
+typedef enum {
+  CURL_FORMADD_OK             CURL_DEPRECATED(7.56.0, ""), /* 1st, no error */
+
+  CURL_FORMADD_MEMORY         CURL_DEPRECATED(7.56.0, ""),
+  CURL_FORMADD_OPTION_TWICE   CURL_DEPRECATED(7.56.0, ""),
+  CURL_FORMADD_NULL           CURL_DEPRECATED(7.56.0, ""),
+  CURL_FORMADD_UNKNOWN_OPTION CURL_DEPRECATED(7.56.0, ""),
+  CURL_FORMADD_INCOMPLETE     CURL_DEPRECATED(7.56.0, ""),
+  CURL_FORMADD_ILLEGAL_ARRAY  CURL_DEPRECATED(7.56.0, ""),
+  /* libcurl was built with form api disabled */
+  CURL_FORMADD_DISABLED       CURL_DEPRECATED(7.56.0, ""),
+
+  CURL_FORMADD_LAST /* last */
+} CURLFORMcode;
+
+/*
+ * NAME curl_formadd()
+ *
+ * DESCRIPTION
+ *
+ * Pretty advanced function for building multi-part formposts. Each invoke
+ * adds one part that together construct a full post. Then use
+ * CURLOPT_HTTPPOST to send it off to libcurl.
+ */
+CURL_EXTERN CURLFORMcode CURL_DEPRECATED(7.56.0, "Use curl_mime_init()")
+curl_formadd(struct curl_httppost **httppost,
+             struct curl_httppost **last_post,
+             ...);
+
+/*
+ * callback function for curl_formget()
+ * The void *arg pointer is the one passed as second argument to
+ *   curl_formget().
+ * The character buffer passed to it must not be freed.
+ * Should return the buffer length passed to it as the argument "len" on
+ *   success.
+ */
+typedef size_t (*curl_formget_callback)(void *arg, const char *buf,
+                                        size_t len);
+
+/*
+ * NAME curl_formget()
+ *
+ * DESCRIPTION
+ *
+ * Serialize a curl_httppost struct built with curl_formadd().
+ * Accepts a void pointer as second argument which is passed to
+ * the curl_formget_callback function.
+ * Returns 0 on success.
+ */
+CURL_EXTERN int CURL_DEPRECATED(7.56.0, "")
+curl_formget(struct curl_httppost *form, void *arg,
+             curl_formget_callback append);
+/*
+ * NAME curl_formfree()
+ *
+ * DESCRIPTION
+ *
+ * Free a multipart formpost previously built with curl_formadd().
+ */
+CURL_EXTERN void CURL_DEPRECATED(7.56.0, "Use curl_mime_free()")
+curl_formfree(struct curl_httppost *form);
+
+/*
+ * NAME curl_getenv()
+ *
+ * DESCRIPTION
+ *
+ * Returns a malloc()'ed string that MUST be curl_free()ed after usage is
+ * complete. DEPRECATED - see lib/README.curlx
+ */
+CURL_EXTERN char *curl_getenv(const char *variable);
+
+/*
+ * NAME curl_version()
+ *
+ * DESCRIPTION
+ *
+ * Returns a static ASCII string of the libcurl version.
+ */
+CURL_EXTERN char *curl_version(void);
+
+/*
+ * NAME curl_easy_escape()
+ *
+ * DESCRIPTION
+ *
+ * Escapes URL strings (converts all letters consider illegal in URLs to their
+ * %XX versions). This function returns a new allocated string or NULL if an
+ * error occurred.
+ */
+CURL_EXTERN char *curl_easy_escape(CURL *curl,
+                                   const char *string,
+                                   int length);
+
+/* the previous version: */
+CURL_EXTERN char *curl_escape(const char *string,
+                              int length);
+
+/*
+ * NAME curl_easy_unescape()
+ *
+ * DESCRIPTION
+ *
+ * Unescapes URL encoding in strings (converts all %XX codes to their 8-bit
+ * versions). This function returns a new allocated string or NULL if an error
+ * occurred.
+ * Conversion Note: On non-ASCII platforms the ASCII %XX codes are
+ * converted into the host encoding.
+ */
+CURL_EXTERN char *curl_easy_unescape(CURL *curl,
+                                     const char *string,
+                                     int inlength,
+                                     int *outlength);
+
+/* the previous version */
+CURL_EXTERN char *curl_unescape(const char *string,
+                                int length);
+
+/*
+ * NAME curl_free()
+ *
+ * DESCRIPTION
+ *
+ * Provided for de-allocation in the same translation unit that did the
+ * allocation. Added in libcurl 7.10
+ */
+CURL_EXTERN void curl_free(void *p);
+
+/*
+ * NAME curl_global_init()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_init() should be invoked exactly once for each application that
+ * uses libcurl and before any call of other libcurl functions.
+ *
+ * This function is thread-safe if CURL_VERSION_THREADSAFE is set in the
+ * curl_version_info_data.features flag (fetch by curl_version_info()).
+ */
+CURL_EXTERN CURLcode curl_global_init(long flags);
+
+/*
+ * NAME curl_global_init_mem()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_init() or curl_global_init_mem() should be invoked exactly once
+ * for each application that uses libcurl. This function can be used to
+ * initialize libcurl and set user defined memory management callback
+ * functions. Users can implement memory management routines to check for
+ * memory leaks, check for misuse of the curl library etc. User registered
+ * callback routines is invoked by this library instead of the system
+ * memory management routines like malloc, free etc.
+ */
+CURL_EXTERN CURLcode curl_global_init_mem(long flags,
+                                          curl_malloc_callback m,
+                                          curl_free_callback f,
+                                          curl_realloc_callback r,
+                                          curl_strdup_callback s,
+                                          curl_calloc_callback c);
+
+/*
+ * NAME curl_global_cleanup()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_cleanup() should be invoked exactly once for each application
+ * that uses libcurl
+ */
+CURL_EXTERN void curl_global_cleanup(void);
+
+/*
+ * NAME curl_global_trace()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_trace() can be invoked at application start to
+ * configure which components in curl should participate in tracing.
+ *
+ * This function is thread-safe if CURL_VERSION_THREADSAFE is set in the
+ * curl_version_info_data.features flag (fetch by curl_version_info()).
+ */
+CURL_EXTERN CURLcode curl_global_trace(const char *config);
+
+/* linked-list structure for the CURLOPT_QUOTE option (and other) */
+struct curl_slist {
+  char *data;
+  struct curl_slist *next;
+};
+
+/*
+ * NAME curl_global_sslset()
+ *
+ * DESCRIPTION
+ *
+ * When built with multiple SSL backends, curl_global_sslset() allows to
+ * choose one. This function can only be called once, and it must be called
+ * *before* curl_global_init().
+ *
+ * The backend can be identified by the id (e.g. CURLSSLBACKEND_OPENSSL). The
+ * backend can also be specified via the name parameter (passing -1 as id). If
+ * both id and name are specified, the name is ignored. If neither id nor
+ * name are specified, the function fails with CURLSSLSET_UNKNOWN_BACKEND
+ * and set the "avail" pointer to the null-terminated list of available
+ * backends.
+ *
+ * Upon success, the function returns CURLSSLSET_OK.
+ *
+ * If the specified SSL backend is not available, the function returns
+ * CURLSSLSET_UNKNOWN_BACKEND and sets the "avail" pointer to a
+ * null-terminated list of available SSL backends.
+ *
+ * The SSL backend can be set only once. If it has already been set, a
+ * subsequent attempt to change it results in a CURLSSLSET_TOO_LATE.
+ */
+
+struct curl_ssl_backend {
+  curl_sslbackend id;
+  const char *name;
+};
+typedef struct curl_ssl_backend curl_ssl_backend;
+
+typedef enum {
+  CURLSSLSET_OK = 0,
+  CURLSSLSET_UNKNOWN_BACKEND,
+  CURLSSLSET_TOO_LATE,
+  CURLSSLSET_NO_BACKENDS /* libcurl was built without any SSL support */
+} CURLsslset;
+
+CURL_EXTERN CURLsslset curl_global_sslset(curl_sslbackend id, const char *name,
+                                          const curl_ssl_backend ***avail);
+
+/*
+ * NAME curl_slist_append()
+ *
+ * DESCRIPTION
+ *
+ * Appends a string to a linked list. If no list exists, it is created first.
+ * Returns the new list, after appending.
+ */
+CURL_EXTERN struct curl_slist *curl_slist_append(struct curl_slist *list,
+                                                 const char *data);
+
+/*
+ * NAME curl_slist_free_all()
+ *
+ * DESCRIPTION
+ *
+ * free a previously built curl_slist.
+ */
+CURL_EXTERN void curl_slist_free_all(struct curl_slist *list);
+
+/*
+ * NAME curl_getdate()
+ *
+ * DESCRIPTION
+ *
+ * Returns the time, in seconds since 1 Jan 1970 of the time string given in
+ * the first argument. The time argument in the second parameter is unused
+ * and should be set to NULL.
+ */
+CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused);
+
+/* info about the certificate chain, for SSL backends that support it. Asked
+   for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */
+struct curl_certinfo {
+  int num_of_certs;             /* number of certificates with information */
+  struct curl_slist **certinfo; /* for each index in this array, there is a
+                                   linked list with textual information for a
+                                   certificate in the format "name:content".
+                                   eg "Subject:foo", "Issuer:bar", etc. */
+};
+
+/* Information about the SSL library used and the respective internal SSL
+   handle, which can be used to obtain further information regarding the
+   connection. Asked for with CURLINFO_TLS_SSL_PTR or CURLINFO_TLS_SESSION. */
+struct curl_tlssessioninfo {
+  curl_sslbackend backend;
+  void *internals;
+};
+
+#define CURLINFO_STRING   0x100000
+#define CURLINFO_LONG     0x200000
+#define CURLINFO_DOUBLE   0x300000
+#define CURLINFO_SLIST    0x400000
+#define CURLINFO_PTR      0x400000 /* same as SLIST */
+#define CURLINFO_SOCKET   0x500000
+#define CURLINFO_OFF_T    0x600000
+#define CURLINFO_MASK     0x0fffff
+#define CURLINFO_TYPEMASK 0xf00000
+
+typedef enum {
+  CURLINFO_NONE, /* first, never use this */
+  CURLINFO_EFFECTIVE_URL    = CURLINFO_STRING + 1,
+  CURLINFO_RESPONSE_CODE    = CURLINFO_LONG   + 2,
+  CURLINFO_TOTAL_TIME       = CURLINFO_DOUBLE + 3,
+  CURLINFO_NAMELOOKUP_TIME  = CURLINFO_DOUBLE + 4,
+  CURLINFO_CONNECT_TIME     = CURLINFO_DOUBLE + 5,
+  CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6,
+  CURLINFO_SIZE_UPLOAD CURL_DEPRECATED(7.55.0, "Use CURLINFO_SIZE_UPLOAD_T")
+                            = CURLINFO_DOUBLE + 7,
+  CURLINFO_SIZE_UPLOAD_T    = CURLINFO_OFF_T  + 7,
+  CURLINFO_SIZE_DOWNLOAD
+                       CURL_DEPRECATED(7.55.0, "Use CURLINFO_SIZE_DOWNLOAD_T")
+                            = CURLINFO_DOUBLE + 8,
+  CURLINFO_SIZE_DOWNLOAD_T  = CURLINFO_OFF_T  + 8,
+  CURLINFO_SPEED_DOWNLOAD
+                       CURL_DEPRECATED(7.55.0, "Use CURLINFO_SPEED_DOWNLOAD_T")
+                            = CURLINFO_DOUBLE + 9,
+  CURLINFO_SPEED_DOWNLOAD_T = CURLINFO_OFF_T  + 9,
+  CURLINFO_SPEED_UPLOAD
+                       CURL_DEPRECATED(7.55.0, "Use CURLINFO_SPEED_UPLOAD_T")
+                            = CURLINFO_DOUBLE + 10,
+  CURLINFO_SPEED_UPLOAD_T   = CURLINFO_OFF_T  + 10,
+  CURLINFO_HEADER_SIZE      = CURLINFO_LONG   + 11,
+  CURLINFO_REQUEST_SIZE     = CURLINFO_LONG   + 12,
+  CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG   + 13,
+  CURLINFO_FILETIME         = CURLINFO_LONG   + 14,
+  CURLINFO_FILETIME_T       = CURLINFO_OFF_T  + 14,
+  CURLINFO_CONTENT_LENGTH_DOWNLOAD
+                       CURL_DEPRECATED(7.55.0,
+                                      "Use CURLINFO_CONTENT_LENGTH_DOWNLOAD_T")
+                            = CURLINFO_DOUBLE + 15,
+  CURLINFO_CONTENT_LENGTH_DOWNLOAD_T = CURLINFO_OFF_T  + 15,
+  CURLINFO_CONTENT_LENGTH_UPLOAD
+                       CURL_DEPRECATED(7.55.0,
+                                       "Use CURLINFO_CONTENT_LENGTH_UPLOAD_T")
+                            = CURLINFO_DOUBLE + 16,
+  CURLINFO_CONTENT_LENGTH_UPLOAD_T   = CURLINFO_OFF_T  + 16,
+  CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17,
+  CURLINFO_CONTENT_TYPE     = CURLINFO_STRING + 18,
+  CURLINFO_REDIRECT_TIME    = CURLINFO_DOUBLE + 19,
+  CURLINFO_REDIRECT_COUNT   = CURLINFO_LONG   + 20,
+  CURLINFO_PRIVATE          = CURLINFO_STRING + 21,
+  CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG   + 22,
+  CURLINFO_HTTPAUTH_AVAIL   = CURLINFO_LONG   + 23,
+  CURLINFO_PROXYAUTH_AVAIL  = CURLINFO_LONG   + 24,
+  CURLINFO_OS_ERRNO         = CURLINFO_LONG   + 25,
+  CURLINFO_NUM_CONNECTS     = CURLINFO_LONG   + 26,
+  CURLINFO_SSL_ENGINES      = CURLINFO_SLIST  + 27,
+  CURLINFO_COOKIELIST       = CURLINFO_SLIST  + 28,
+  CURLINFO_LASTSOCKET  CURL_DEPRECATED(7.45.0, "Use CURLINFO_ACTIVESOCKET")
+                            = CURLINFO_LONG   + 29,
+  CURLINFO_FTP_ENTRY_PATH   = CURLINFO_STRING + 30,
+  CURLINFO_REDIRECT_URL     = CURLINFO_STRING + 31,
+  CURLINFO_PRIMARY_IP       = CURLINFO_STRING + 32,
+  CURLINFO_APPCONNECT_TIME  = CURLINFO_DOUBLE + 33,
+  CURLINFO_CERTINFO         = CURLINFO_PTR    + 34,
+  CURLINFO_CONDITION_UNMET  = CURLINFO_LONG   + 35,
+  CURLINFO_RTSP_SESSION_ID  = CURLINFO_STRING + 36,
+  CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG   + 37,
+  CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG   + 38,
+  CURLINFO_RTSP_CSEQ_RECV   = CURLINFO_LONG   + 39,
+  CURLINFO_PRIMARY_PORT     = CURLINFO_LONG   + 40,
+  CURLINFO_LOCAL_IP         = CURLINFO_STRING + 41,
+  CURLINFO_LOCAL_PORT       = CURLINFO_LONG   + 42,
+  CURLINFO_TLS_SESSION CURL_DEPRECATED(7.48.0, "Use CURLINFO_TLS_SSL_PTR")
+                            = CURLINFO_PTR    + 43,
+  CURLINFO_ACTIVESOCKET     = CURLINFO_SOCKET + 44,
+  CURLINFO_TLS_SSL_PTR      = CURLINFO_PTR    + 45,
+  CURLINFO_HTTP_VERSION     = CURLINFO_LONG   + 46,
+  CURLINFO_PROXY_SSL_VERIFYRESULT = CURLINFO_LONG + 47,
+  CURLINFO_PROTOCOL    CURL_DEPRECATED(7.85.0, "Use CURLINFO_SCHEME")
+                            = CURLINFO_LONG   + 48,
+  CURLINFO_SCHEME           = CURLINFO_STRING + 49,
+  CURLINFO_TOTAL_TIME_T     = CURLINFO_OFF_T + 50,
+  CURLINFO_NAMELOOKUP_TIME_T = CURLINFO_OFF_T + 51,
+  CURLINFO_CONNECT_TIME_T   = CURLINFO_OFF_T + 52,
+  CURLINFO_PRETRANSFER_TIME_T = CURLINFO_OFF_T + 53,
+  CURLINFO_STARTTRANSFER_TIME_T = CURLINFO_OFF_T + 54,
+  CURLINFO_REDIRECT_TIME_T  = CURLINFO_OFF_T + 55,
+  CURLINFO_APPCONNECT_TIME_T = CURLINFO_OFF_T + 56,
+  CURLINFO_RETRY_AFTER      = CURLINFO_OFF_T + 57,
+  CURLINFO_EFFECTIVE_METHOD = CURLINFO_STRING + 58,
+  CURLINFO_PROXY_ERROR      = CURLINFO_LONG + 59,
+  CURLINFO_REFERER          = CURLINFO_STRING + 60,
+  CURLINFO_CAINFO           = CURLINFO_STRING + 61,
+  CURLINFO_CAPATH           = CURLINFO_STRING + 62,
+  CURLINFO_XFER_ID          = CURLINFO_OFF_T + 63,
+  CURLINFO_CONN_ID          = CURLINFO_OFF_T + 64,
+  CURLINFO_QUEUE_TIME_T     = CURLINFO_OFF_T + 65,
+  CURLINFO_USED_PROXY       = CURLINFO_LONG + 66,
+  CURLINFO_POSTTRANSFER_TIME_T = CURLINFO_OFF_T + 67,
+  CURLINFO_EARLYDATA_SENT_T = CURLINFO_OFF_T + 68,
+  CURLINFO_HTTPAUTH_USED    = CURLINFO_LONG + 69,
+  CURLINFO_PROXYAUTH_USED   = CURLINFO_LONG + 70,
+  CURLINFO_SIZE_DELIVERED   = CURLINFO_OFF_T + 71,
+  CURLINFO_LASTONE          = 71
+} CURLINFO;
+
+/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as
+   CURLINFO_HTTP_CODE */
+#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE
+
+typedef enum {
+  CURLCLOSEPOLICY_NONE, /* first, never use this */
+
+  CURLCLOSEPOLICY_OLDEST,
+  CURLCLOSEPOLICY_LEAST_RECENTLY_USED,
+  CURLCLOSEPOLICY_LEAST_TRAFFIC,
+  CURLCLOSEPOLICY_SLOWEST,
+  CURLCLOSEPOLICY_CALLBACK,
+
+  CURLCLOSEPOLICY_LAST /* last, never use this */
+} curl_closepolicy;
+
+#define CURL_GLOBAL_SSL (1 << 0) /* no purpose since 7.57.0 */
+#define CURL_GLOBAL_WIN32 (1 << 1)
+#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL | CURL_GLOBAL_WIN32)
+#define CURL_GLOBAL_NOTHING 0
+#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
+#define CURL_GLOBAL_ACK_EINTR (1 << 2)
+
+/*****************************************************************************
+ * Setup defines, protos etc for the sharing stuff.
+ */
+
+/* Different data locks for a single share */
+typedef enum {
+  CURL_LOCK_DATA_NONE = 0,
+  /*  CURL_LOCK_DATA_SHARE is used internally to say that the locking is made
+   *  to change the internal state of the share itself.
+   */
+  CURL_LOCK_DATA_SHARE,
+  CURL_LOCK_DATA_COOKIE,
+  CURL_LOCK_DATA_DNS,
+  CURL_LOCK_DATA_SSL_SESSION,
+  CURL_LOCK_DATA_CONNECT,
+  CURL_LOCK_DATA_PSL,
+  CURL_LOCK_DATA_HSTS,
+  CURL_LOCK_DATA_LAST
+} curl_lock_data;
+
+/* Different lock access types */
+typedef enum {
+  CURL_LOCK_ACCESS_NONE = 0,   /* unspecified action */
+  CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */
+  CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */
+  CURL_LOCK_ACCESS_LAST        /* never use */
+} curl_lock_access;
+
+typedef void (*curl_lock_function)(CURL *handle,
+                                   curl_lock_data data,
+                                   curl_lock_access locktype,
+                                   void *userptr);
+typedef void (*curl_unlock_function)(CURL *handle,
+                                     curl_lock_data data,
+                                     void *userptr);
+
+typedef enum {
+  CURLSHE_OK,  /* all is fine */
+  CURLSHE_BAD_OPTION, /* 1 */
+  CURLSHE_IN_USE,     /* 2 */
+  CURLSHE_INVALID,    /* 3 */
+  CURLSHE_NOMEM,      /* 4 out of memory */
+  CURLSHE_NOT_BUILT_IN, /* 5 feature not present in lib */
+  CURLSHE_LAST        /* never use */
+} CURLSHcode;
+
+typedef enum {
+  CURLSHOPT_NONE,  /* do not use */
+  CURLSHOPT_SHARE,   /* specify a data type to share */
+  CURLSHOPT_UNSHARE, /* specify which data type to stop sharing */
+  CURLSHOPT_LOCKFUNC,   /* pass in a 'curl_lock_function' pointer */
+  CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */
+  CURLSHOPT_USERDATA,   /* pass in a user data pointer used in the lock/unlock
+                           callback functions */
+  CURLSHOPT_LAST  /* never use */
+} CURLSHoption;
+
+CURL_EXTERN CURLSH *curl_share_init(void);
+CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH *sh, CURLSHoption option, ...);
+CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH *sh);
+
+/****************************************************************************
+ * Structures for querying information about the curl library at runtime.
+ */
+
+typedef enum {
+  CURLVERSION_FIRST,    /* 7.10 */
+  CURLVERSION_SECOND,   /* 7.11.1 */
+  CURLVERSION_THIRD,    /* 7.12.0 */
+  CURLVERSION_FOURTH,   /* 7.16.1 */
+  CURLVERSION_FIFTH,    /* 7.57.0 */
+  CURLVERSION_SIXTH,    /* 7.66.0 */
+  CURLVERSION_SEVENTH,  /* 7.70.0 */
+  CURLVERSION_EIGHTH,   /* 7.72.0 */
+  CURLVERSION_NINTH,    /* 7.75.0 */
+  CURLVERSION_TENTH,    /* 7.77.0 */
+  CURLVERSION_ELEVENTH, /* 7.87.0 */
+  CURLVERSION_TWELFTH,  /* 8.8.0 */
+  CURLVERSION_LAST /* never actually use this */
+} CURLversion;
+
+/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by programs
+   that want to get version information. It is meant to be a built-in
+   version number for what kind of struct the caller expects. If the struct
+   ever changes, we redefine the NOW to another enum from above. */
+#define CURLVERSION_NOW CURLVERSION_TWELFTH
+
+struct curl_version_info_data {
+  CURLversion age;          /* age of the returned struct */
+  const char *version;      /* LIBCURL_VERSION */
+  unsigned int version_num; /* LIBCURL_VERSION_NUM */
+  const char *host;         /* OS/host/cpu/machine when configured */
+  int features;             /* bitmask, see defines below */
+  const char *ssl_version;  /* human readable string */
+  long ssl_version_num;     /* not used anymore, always 0 */
+  const char *libz_version; /* human readable string */
+  /* protocols is terminated by an entry with a NULL protoname */
+  const char * const *protocols;
+
+  /* The fields below this were added in CURLVERSION_SECOND */
+  const char *ares;
+  int ares_num;
+
+  /* This field was added in CURLVERSION_THIRD */
+  const char *libidn;
+
+  /* These field were added in CURLVERSION_FOURTH */
+
+  /* Same as '_libiconv_version' if built with HAVE_ICONV */
+  int iconv_ver_num;
+
+  const char *libssh_version; /* human readable string */
+
+  /* These fields were added in CURLVERSION_FIFTH */
+  unsigned int brotli_ver_num; /* Numeric Brotli version
+                                  (MAJOR << 24) | (MINOR << 12) | PATCH */
+  const char *brotli_version; /* human readable string. */
+
+  /* These fields were added in CURLVERSION_SIXTH */
+  unsigned int nghttp2_ver_num; /* Numeric nghttp2 version
+                                   (MAJOR << 16) | (MINOR << 8) | PATCH */
+  const char *nghttp2_version; /* human readable string. */
+  const char *quic_version;    /* human readable quic (+ HTTP/3) library +
+                                  version or NULL */
+
+  /* These fields were added in CURLVERSION_SEVENTH */
+  const char *cainfo;          /* the built-in default CURLOPT_CAINFO, might
+                                  be NULL */
+  const char *capath;          /* the built-in default CURLOPT_CAPATH, might
+                                  be NULL */
+
+  /* These fields were added in CURLVERSION_EIGHTH */
+  unsigned int zstd_ver_num; /* Numeric Zstd version
+                                  (MAJOR << 24) | (MINOR << 12) | PATCH */
+  const char *zstd_version; /* human readable string. */
+
+  /* These fields were added in CURLVERSION_NINTH */
+  const char *hyper_version; /* human readable string. */
+
+  /* These fields were added in CURLVERSION_TENTH */
+  const char *gsasl_version; /* human readable string. */
+
+  /* These fields were added in CURLVERSION_ELEVENTH */
+  /* feature_names is terminated by an entry with a NULL feature name */
+  const char * const *feature_names;
+
+  /* These fields were added in CURLVERSION_TWELFTH */
+  const char *rtmp_version; /* human readable string. */
+};
+typedef struct curl_version_info_data curl_version_info_data;
+
+#define CURL_VERSION_IPV6         (1<<0)  /* IPv6-enabled */
+#define CURL_VERSION_KERBEROS4    (1<<1)  /* Kerberos V4 auth is supported
+                                             (deprecated) */
+#define CURL_VERSION_SSL          (1<<2)  /* SSL options are present */
+#define CURL_VERSION_LIBZ         (1<<3)  /* libz features are present */
+#define CURL_VERSION_NTLM         (1<<4)  /* NTLM auth is supported */
+#define CURL_VERSION_GSSNEGOTIATE (1<<5)  /* Negotiate auth is supported
+                                             (deprecated) */
+#define CURL_VERSION_DEBUG        (1<<6)  /* Built with debug capabilities */
+#define CURL_VERSION_ASYNCHDNS    (1<<7)  /* Asynchronous DNS resolves */
+#define CURL_VERSION_SPNEGO       (1<<8)  /* SPNEGO auth is supported */
+#define CURL_VERSION_LARGEFILE    (1<<9)  /* Supports files larger than 2GB */
+#define CURL_VERSION_IDN          (1<<10) /* Internationized Domain Names are
+                                             supported */
+#define CURL_VERSION_SSPI         (1<<11) /* Built against Windows SSPI */
+#define CURL_VERSION_CONV         (1<<12) /* Character conversions supported */
+#define CURL_VERSION_CURLDEBUG    (1<<13) /* Debug memory tracking supported
+                                             (deprecated) */
+#define CURL_VERSION_TLSAUTH_SRP  (1<<14) /* TLS-SRP auth is supported */
+#define CURL_VERSION_NTLM_WB      (1<<15) /* NTLM delegation to winbind helper
+                                             is supported */
+#define CURL_VERSION_HTTP2        (1<<16) /* HTTP2 support built-in */
+#define CURL_VERSION_GSSAPI       (1<<17) /* Built against a GSS-API library */
+#define CURL_VERSION_KERBEROS5    (1<<18) /* Kerberos V5 auth is supported */
+#define CURL_VERSION_UNIX_SOCKETS (1<<19) /* Unix domain sockets support */
+#define CURL_VERSION_PSL          (1<<20) /* Mozilla's Public Suffix List, used
+                                             for cookie domain verification */
+#define CURL_VERSION_HTTPS_PROXY  (1<<21) /* HTTPS-proxy support built-in */
+#define CURL_VERSION_MULTI_SSL    (1<<22) /* Multiple SSL backends available */
+#define CURL_VERSION_BROTLI       (1<<23) /* Brotli features are present. */
+#define CURL_VERSION_ALTSVC       (1<<24) /* Alt-Svc handling built-in */
+#define CURL_VERSION_HTTP3        (1<<25) /* HTTP3 support built-in */
+#define CURL_VERSION_ZSTD         (1<<26) /* zstd features are present */
+#define CURL_VERSION_UNICODE      (1<<27) /* Unicode support on Windows */
+#define CURL_VERSION_HSTS         (1<<28) /* HSTS is supported */
+#define CURL_VERSION_GSASL        (1<<29) /* libgsasl is supported */
+#define CURL_VERSION_THREADSAFE   (1<<30) /* libcurl API is thread-safe */
+
+/*
+ * NAME curl_version_info()
+ *
+ * DESCRIPTION
+ *
+ * This function returns a pointer to a static copy of the version info
+ * struct. See above.
+ */
+CURL_EXTERN curl_version_info_data *curl_version_info(CURLversion stamp);
+
+/*
+ * NAME curl_easy_strerror()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_strerror function may be used to turn a CURLcode value
+ * into the equivalent human readable error string. This is useful
+ * for printing meaningful error messages.
+ */
+CURL_EXTERN const char *curl_easy_strerror(CURLcode error);
+
+/*
+ * NAME curl_share_strerror()
+ *
+ * DESCRIPTION
+ *
+ * The curl_share_strerror function may be used to turn a CURLSHcode value
+ * into the equivalent human readable error string. This is useful
+ * for printing meaningful error messages.
+ */
+CURL_EXTERN const char *curl_share_strerror(CURLSHcode error);
+
+/*
+ * NAME curl_easy_pause()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_pause function pauses or unpauses transfers. Select the new
+ * state by setting the action bitmask, use the convenience defines below.
+ *
+ */
+CURL_EXTERN CURLcode curl_easy_pause(CURL *curl, int action);
+
+#define CURLPAUSE_RECV      (1 << 0)
+#define CURLPAUSE_RECV_CONT 0
+
+#define CURLPAUSE_SEND      (1 << 2)
+#define CURLPAUSE_SEND_CONT 0
+
+#define CURLPAUSE_ALL       (CURLPAUSE_RECV | CURLPAUSE_SEND)
+#define CURLPAUSE_CONT      (CURLPAUSE_RECV_CONT | CURLPAUSE_SEND_CONT)
+
+/*
+ * NAME curl_easy_ssls_import()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_ssls_import function adds a previously exported SSL session
+ * to the SSL session cache of the easy handle (or the underlying share).
+ */
+CURL_EXTERN CURLcode curl_easy_ssls_import(CURL *curl,
+                                           const char *session_key,
+                                           const unsigned char *shmac,
+                                           size_t shmac_len,
+                                           const unsigned char *sdata,
+                                           size_t sdata_len);
+
+/* This is the curl_ssls_export_cb callback prototype. It
+ * is passed to curl_easy_ssls_export() to extract SSL sessions/tickets. */
+typedef CURLcode curl_ssls_export_cb(CURL *curl,
+                                     void *userptr,
+                                     const char *session_key,
+                                     const unsigned char *shmac,
+                                     size_t shmac_len,
+                                     const unsigned char *sdata,
+                                     size_t sdata_len,
+                                     curl_off_t valid_until,
+                                     int ietf_tls_id,
+                                     const char *alpn,
+                                     size_t earlydata_max);
+
+/*
+ * NAME curl_easy_ssls_export()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_ssls_export function iterates over all SSL sessions stored
+ * in the easy handle (or underlying share) and invokes the passed
+ * callback.
+ *
+ */
+CURL_EXTERN CURLcode curl_easy_ssls_export(CURL *curl,
+                                           curl_ssls_export_cb *export_fn,
+                                           void *userptr);
+
+#ifdef __cplusplus
+} /* end of extern "C" */
+#endif
+
+/* unfortunately, the easy.h and multi.h include files need options and info
+   stuff before they can be included! */
+#include "easy.h" /* nothing in curl is fun without the easy stuff */
+#include "multi.h"
+#include "urlapi.h"
+#include "options.h"
+#include "header.h"
+#include "websockets.h"
+#include "mprintf.h"
+
+/* the typechecker does not work in C++ (yet) */
+#if ((defined(__GNUC__) && defined(__GNUC_MINOR__) && \
+      ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))) || \
+    (defined(__clang__) && __clang_major__ >= 14)) && \
+    !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK)
+#include "typecheck-gcc.h"
+#else
+#if defined(__STDC__) && (__STDC__ >= 1)
+/* This preprocessor magic ensures that application authors pass exactly three
+   arguments to these functions. For compatibility with C++ global namespace
+   '::' and reusing these symbols as method names, while also avoiding
+   recursive macros, use a two-stage solution. */
+#define curl_exactly_three_arguments(a, b, c) (a, b, c)
+#define curl_easy_setopt(handle, opt, param) \
+  curl_easy_setopt curl_exactly_three_arguments(handle, opt, param)
+#define curl_easy_getinfo(handle, info, arg) \
+  curl_easy_getinfo curl_exactly_three_arguments(handle, info, arg)
+#define curl_share_setopt(share, opt, param) \
+  curl_share_setopt curl_exactly_three_arguments(share, opt, param)
+#define curl_multi_setopt(handle, opt, param) \
+  curl_multi_setopt curl_exactly_three_arguments(handle, opt, param)
+#endif /* __STDC__ >= 1 */
+#endif /* gcc >= 4.3 && !__cplusplus && !CURL_DISABLE_TYPECHECK */
+
+#endif /* CURLINC_CURL_H */