@cratis/pi 7.100.0 → 7.102.0

package/package/corpus/skills/cratis-engineering-local-cross-repo-verification/scripts/cratis-local-packages.sh

@@ -0,0 +1,778 @@
+#!/usr/bin/env bash
+# Copyright (c) Cratis. All rights reserved.
+# Licensed under the MIT license. See LICENSE file in the project root for full license information.
+set -euo pipefail
+
+usage() {
+    cat <<'HELP'
+Usage: cratis-local-packages.sh [--dry-run] COMMAND [ARGS]
+Portable local package verification for macOS/Linux (Bash 3.2+). Windows: use WSL.
+Exit codes: 0 success, 1 findings/failed operation, 2 cannot run/invalid input.
+
+Commands (COMMAND --help shows these instructions too):
+  stamp PRODUCER
+    Next patch of the highest reachable vX.Y.Z tag, UTC minute and HEAD sha7.
+  pack-nuget PRODUCER STAMP PROJECT-OR-SLN...
+    Release-pack each target into the NuGet feed; requires dotnet.
+  pack-npm PRODUCER STAMP
+    Requires node and Yarn 4, and a completed repository build. Temporarily
+    version non-private workspaces, pack with %s-%v.tgz (Yarn slugifies scoped
+    names), and restore tracked manifests even on failure. Pack lifecycle hooks
+    are Yarn's own behavior; this helper does not run a separate build.
+  use-nuget CONSUMER STAMP [PACKAGE-ID...]
+    Create a CPM overlay importing the repository's own Directory.Packages.props.
+    Defaults to every stamped package ID in the feed. Prints properties and sourceable
+    env. With source mapping, also prints the required restore --configfile.
+    Non-CPM: manually use an untracked project copy with explicit PackageReference
+    versions and dotnet restore --source FEED/nuget; do not edit shipped versions.
+  use-npm CONSUMER STAMP
+    Requires node and tar. Back up package.json, yarn.lock (including existing edits),
+    and git diff; add file-tarball resolutions for every stamped feed package.
+    Run yarn install afterward. Only one active npm overlay per session.
+  restore CONSUMER
+    Restore npm backups when only overlay resolutions and their local lockfile
+    entries changed (including yarn install). Refuse unrelated changes and retain
+    backups for review. Remove CPM/env overlays
+    and run check. No git checkout is used on consumer files.
+  check REPO [--staged]
+    Scan added/changed tracked lines (staged-only if requested), plus all contents
+    of untracked, non-ignored files. Reports path:line:pattern and file counts.
+  clean [CONSUMER] [--stamp STAMP | --all] [--apply]
+    Default: list all local feed/cache/image/session subjects, without deleting.
+    --apply deletes listed subjects (docker rmi, never force). Refuses more than
+    CRATIS_LOCAL_CLEAN_MAX subjects (default 500), or unresolved npm backups.
+    Known sessions are registered in FEED/sessions; an optional consumer also
+    discovers its per-worktree session. Docker probes have a 10-second deadline.
+  --self-test
+    Isolated scratch HOME tests; npm uses inherited PATH to discover node.
+    Other tests use system PATH. Reports passed and skipped counts.
+
+Configuration: source ${XDG_CONFIG_HOME:-$HOME/.config}/cratis/local-packages.env
+if present (trusted shell code), then use these defaults for unset variables:
+  CRATIS_LOCAL_FEED=${XDG_CACHE_HOME:-$HOME/.cache}/cratis/local-feed
+  CRATIS_LOCAL_SESSION_DIR=<absolute-git-dir>/cratis-local (per checkout)
+  NUGET_PACKAGES=$HOME/.nuget/packages
+  CRATIS_LOCAL_CLEAN_MAX=500
+  CRATIS_LOCAL_RUN=optional executable wrapper, invoked for each heavy step as:
+    "$CRATIS_LOCAL_RUN" build LABEL -- COMMAND ARGUMENTS...
+Global --dry-run prints mutations instead of executing them; read-only discovery
+still runs. Use a unique stamp once per producer build. Never publish local builds.
+HELP
+}
+
+die() { printf 'ERROR: %s\n' "$*" >&2; exit 2; }
+failed() { printf 'ERROR: %s\n' "$*" >&2; exit 1; }
+need() { command -v "$1" >/dev/null 2>&1 || die "required executable not found: $1"; }
+quote_command() { printf ' +'; printf ' %q' "$@"; printf '\n'; }
+DRY=0
+ARGS=()
+for argument in "$@"; do
+    case "$argument" in --dry-run) DRY=1 ;; *) ARGS+=("$argument") ;; esac
+done
+set -- ${ARGS[@]+"${ARGS[@]}"}
+case " ${*:-} " in *' --help '*|*' -h '*) usage; exit 0 ;; esac
+[ $# -gt 0 ] || { usage; exit 2; }
+SELF=$(cd "$(dirname "$0")" && pwd)/$(basename "$0")
+# Self-test dispatch precedes configuration so the real HOME/config cannot affect it.
+MODE=$1
+shift
+if [ "$MODE" != --self-test ]; then
+    CONFIG=${XDG_CONFIG_HOME:-$HOME/.config}/cratis/local-packages.env
+    if [ -f "$CONFIG" ]; then
+        # shellcheck source=/dev/null
+        source "$CONFIG"
+    fi
+fi
+FEED=${CRATIS_LOCAL_FEED:-${XDG_CACHE_HOME:-$HOME/.cache}/cratis/local-feed}
+NUGET_CACHE=${NUGET_PACKAGES:-$HOME/.nuget/packages}
+case "$FEED" in /*) ;; *) FEED=$PWD/$FEED ;; esac
+case "$NUGET_CACHE" in /*) ;; *) NUGET_CACHE=$PWD/$NUGET_CACHE ;; esac
+TMP=''
+PACK_REPO=''
+PACK_MANIFESTS=()
+cleanup() {
+    local status=$?
+    trap - EXIT
+    if [ ${#PACK_MANIFESTS[@]} -gt 0 ]; then
+        if ! git -C "$PACK_REPO" checkout -- "${PACK_MANIFESTS[@]}"; then
+            printf 'ERROR: producer manifest restoration failed: %s\n' "$PACK_REPO" >&2
+            status=1
+        fi
+    fi
+    if [ -n "$TMP" ]; then rm -rf -- "$TMP"; fi
+    exit "$status"
+}
+trap cleanup EXIT
+trap 'exit 1' HUP INT TERM
+scratch() { if [ -z "$TMP" ]; then TMP=$(mktemp -d "${TMPDIR:-/tmp}/cratis-local.XXXXXXXX"); fi; }
+mutate() { if [ "$DRY" -eq 1 ]; then quote_command "$@"; else "$@"; fi; }
+heavy() {
+    local kind=$1 label=$2
+    shift 2
+    if [ -n "${CRATIS_LOCAL_RUN:-}" ]; then
+        mutate "$CRATIS_LOCAL_RUN" "$kind" "$label" -- "$@"
+    else
+        mutate "$@"
+    fi
+}
+repo_root() { git -C "$1" rev-parse --show-toplevel 2>/dev/null || die "not a Git repository: $1"; }
+valid_stamp() {
+    [[ "$1" =~ ^[0-9]+\.[0-9]+\.[0-9]+-local\.[0-9]{12}\.g[0-9a-f]{7}$ ]] || die "invalid local stamp: $1"
+}
+session_path() {
+    local path git_dir
+    git_dir=$(git -C "$1" rev-parse --absolute-git-dir)
+    path=${CRATIS_LOCAL_SESSION_DIR:-$git_dir/cratis-local}
+    case "$path" in /*) ;; *) path=$PWD/$path ;; esac
+    [ "$path" != / ] && [ "$path" != "$1" ] && [ ! -L "$path" ] || die "unsafe session directory: $path"
+    # Git's own directory is never tracked, but check-ignore does not classify it
+    # as ignored. Other in-checkout overrides must still be explicitly ignored.
+    case "$path/" in
+        "$git_dir/"*) ;;
+        "$1/"*) git -C "$1" check-ignore -q "$path/" || die "session override must be outside tracked files or ignored" ;;
+    esac
+    printf '%s\n' "$path"
+}
+validate_session() {
+    local session=$1 entry
+    [ ! -L "$session" ] || die "symlink session directory: $session"
+    [ -d "$session" ] || return 0
+    for entry in "$session"/* "$session"/.[!.]* "$session"/..?*; do
+        [ -e "$entry" ] || [ -L "$entry" ] || continue
+        [ ! -L "$entry" ] || die "symlink in session: $entry"
+        case "${entry##*/}" in
+            repo|stamp|env|Directory.Packages.props|nuget.config) [ -f "$entry" ] || die "unexpected session entry: $entry" ;;
+            npm-backup) [ -d "$entry" ] || die "unexpected session entry: $entry" ;;
+            *) die "unrecognized file in session (preserved): $entry" ;;
+        esac
+    done
+}
+register_session() {
+    local repo=$1 session=$2 stamp=$3
+    validate_session "$session"
+    if [ -f "$session/repo" ] && [ "$(cat "$session/repo")" != "$repo" ]; then die 'session belongs to another checkout'; fi
+    mkdir -p "$session" "$FEED"
+    printf '%s\n' "$repo" > "$session/repo"
+    printf '%s\n' "$stamp" > "$session/stamp"
+    if [ ! -f "$FEED/sessions" ] || ! grep -Fxq -- "$session" "$FEED/sessions"; then
+        printf '%s\n' "$session" >> "$FEED/sessions"
+    fi
+}
+xml_escape() { printf '%s' "$1" | sed -e 's/\&/\&amp;/g' -e 's/</\&lt;/g' -e 's/>/\&gt;/g' -e 's/"/\&quot;/g' -e "s/'/\&apos;/g"; }
+
+stamp() {
+    [ $# -eq 1 ] || die 'stamp requires a producer repository'
+    local repo tag major minor patch sha
+    repo=$(repo_root "$1")
+    tag=$(git -C "$repo" tag --merged HEAD | awk '/^v[0-9]+\.[0-9]+\.[0-9]+$/' | sort -t. -k1.2,1n -k2,2n -k3,3n | tail -n 1)
+    if [ -n "$tag" ]; then
+        IFS=. read -r major minor patch <<< "${tag#v}"
+        tag="$major.$minor.$((10#$patch + 1))"
+    else
+        printf 'WARNING: no reachable vX.Y.Z tag; using 0.1.0\n' >&2
+        tag=0.1.0
+    fi
+    sha=$(git -C "$repo" rev-parse HEAD) || die 'producer has no HEAD commit'
+    printf '%s-local.%s.g%.7s\n' "$tag" "$(date -u +%Y%m%d%H%M)" "$sha"
+}
+
+pack_nuget() {
+    [ $# -ge 3 ] || die 'pack-nuget requires producer, stamp and targets'
+    local repo version target path count=0
+    repo=$(repo_root "$1"); version=$2; shift 2
+    valid_stamp "$version"; need dotnet
+    mutate mkdir -p "$FEED/nuget"
+    for target in "$@"; do
+        (cd "$repo" && heavy build "pack NuGet $target" dotnet pack "$target" -c Release "-p:PackageVersion=$version" "-p:Version=$version" -o "$FEED/nuget")
+    done
+    [ "$DRY" -eq 0 ] || return 0
+    while IFS= read -r -d '' path; do
+        printf '%s\n' "$path"; count=$((count + 1))
+    done < <(find "$FEED/nuget" -type f -name "*.$version.nupkg" -print0)
+    [ "$count" -gt 0 ] || failed 'pack produced no matching nupkgs'
+    printf 'produced %s nupkgs\n' "$count"
+}
+
+pack_npm() {
+    [ $# -eq 2 ] || die 'pack-npm requires producer and stamp'
+    local repo version path count=0
+    repo=$(repo_root "$1"); version=$2
+    valid_stamp "$version"; need node; need yarn; scratch
+    git -C "$repo" diff --name-only HEAD -- 'package.json' '*/package.json' > "$TMP/modified"
+    git -C "$repo" diff --cached --name-only -- 'package.json' '*/package.json' >> "$TMP/modified"
+    git -C "$repo" diff --name-only -- 'package.json' '*/package.json' >> "$TMP/modified"
+    [ ! -s "$TMP/modified" ] || die 'tracked package.json is already modified; preserve it before packing'
+    (cd "$repo" && yarn workspaces list --json) > "$TMP/workspaces"
+    node - "$repo" "$TMP/workspaces" > "$TMP/manifests" <<'NODE'
+const fs = require('fs'), path = require('path');
+const [repo, list] = process.argv.slice(2);
+for (const line of fs.readFileSync(list, 'utf8').trim().split('\n')) {
+    const workspace = JSON.parse(line);
+    const file = path.join(workspace.location, 'package.json');
+    if (!JSON.parse(fs.readFileSync(path.join(repo, file), 'utf8')).private)
+        process.stdout.write(file + '\0');
+}
+NODE
+    PACK_REPO=$repo
+    while IFS= read -r -d '' path; do
+        git -C "$repo" ls-files --error-unmatch -- "$path" >/dev/null || die "untracked workspace manifest: $path"
+        PACK_MANIFESTS+=("$path")
+    done < "$TMP/manifests"
+    [ ${#PACK_MANIFESTS[@]} -gt 0 ] || die 'no non-private workspaces found'
+    if [ "$DRY" -eq 1 ]; then
+        quote_command node '<set non-private workspace versions>' "$version" "${PACK_MANIFESTS[@]}"
+        PACK_MANIFESTS=()
+    else
+        node - "$repo" "$version" "${PACK_MANIFESTS[@]}" <<'NODE'
+const fs = require('fs'), path = require('path');
+const [repo, version, ...files] = process.argv.slice(2);
+for (const file of files) {
+    const target = path.join(repo, file), json = JSON.parse(fs.readFileSync(target, 'utf8'));
+    json.version = version;
+    fs.writeFileSync(target, JSON.stringify(json, null, 2) + '\n');
+}
+NODE
+    fi
+    mutate mkdir -p "$FEED/npm"
+    (cd "$repo" && heavy build 'pack npm workspaces' yarn workspaces foreach -A --no-private pack --out "$FEED/npm/%s-%v.tgz")
+    if [ "$DRY" -eq 1 ]; then quote_command git -C "$repo" checkout -- '<versioned manifests>'; return 0; fi
+    git -C "$repo" checkout -- "${PACK_MANIFESTS[@]}"
+    PACK_MANIFESTS=()
+    while IFS= read -r -d '' path; do
+        printf '%s\n' "$path"; count=$((count + 1))
+    done < <(find "$FEED/npm" -type f -name "*-$version.tgz" -print0)
+    [ "$count" -gt 0 ] || failed 'pack produced no matching npm tarballs'
+    printf 'produced %s npm tarballs\n' "$count"
+}
+
+# Read Include/Update attributes without assuming one element per line.
+package_ids() {
+    awk 'BEGIN { RS="<" } /^PackageVersion[[:space:]]/ {
+        gsub(sprintf("%c",39),"\"")
+        if (match($0, /(Include|Update)[[:space:]]*=[[:space:]]*"[^"]+"/)) {
+            value=substr($0,RSTART,RLENGTH); sub(/^[^"]*"/,"",value); sub(/"$/,"",value); print value
+        }
+    }' "$1"
+}
+source_mapping() {
+    local config=$1 output=$2 id
+    shift 2
+    scratch
+    printf '%s\n' "$@" > "$TMP/ids"
+    # Preserve all existing configuration, but remove exact mappings for overridden
+    # IDs: NuGet must not select both the remote source and our local exact match.
+    awk -v ids="$TMP/ids" -v feed="$(xml_escape "$FEED/nuget")" -v base="$(xml_escape "$(dirname "$config")")" '
+        BEGIN { while ((getline id < ids)>0) { selected[tolower(id)]=1; ordered[++count]=id }; RS="<"; ORS="" }
+        NR==1 { print; next }
+        /^package[[:space:]]/ {
+            value=$0; gsub(sprintf("%c",39),"\"",value)
+            sub(/^.*pattern[[:space:]]*=[[:space:]]*"/,"",value); sub(/".*$/,"",value)
+            if (tolower(value) in selected) next
+        }
+        /^packageSources[[:space:]]*>/ { sources=1 }
+        /^\/packageSources[[:space:]]*>/ { sources=0 }
+        sources && /^add[[:space:]]/ {
+            # Relative source paths must retain their meaning after relocation.
+            value=$0; gsub(sprintf("%c",39),"\"",value)
+            if (match(value,/value[[:space:]]*=[[:space:]]*"[^"]*"/)) {
+                attribute=substr(value,RSTART,RLENGTH); sub(/^[^"]*"/,"",attribute); sub(/"$/,"",attribute)
+                if (attribute !~ /^([A-Za-z][A-Za-z0-9+.-]*:|\/|\\\\|%)/) {
+                    sub(/value[[:space:]]*=[[:space:]]*"[^"]*"/,"value=\"" base "/" attribute "\"",value)
+                    $0=value
+                }
+            }
+        }
+        /^\/packageSources[[:space:]]*>/ { print "<add key=\"cratis-local\" value=\"" feed "\" />\n" }
+        /^\/packageSourceMapping[[:space:]]*>/ {
+            print "<packageSource key=\"cratis-local\">\n"
+            for (i=1;i<=count;i++) print "<package pattern=\"" ordered[i] "\" />\n"
+            print "</packageSource>\n"
+        }
+        { print "<" $0 }
+    ' "$config" > "$output"
+}
+
+use_nuget() {
+    [ $# -ge 2 ] || die 'use-nuget requires consumer and stamp'
+    local repo version session props id file config='' props_key sources_key action
+    local ids=()
+    repo=$(repo_root "$1"); version=$2; shift 2
+    valid_stamp "$version"; props=$repo/Directory.Packages.props
+    [ -f "$props" ] || die 'no Directory.Packages.props (non-CPM). Manual alternative: untracked project copy, explicit PackageReference versions, dotnet restore --source FEED/nuget'
+    session=$(session_path "$repo"); scratch
+    package_ids "$props" > "$TMP/consumer-ids"
+    if [ $# -gt 0 ]; then
+        ids=("$@")
+    elif [ -d "$FEED/nuget" ]; then
+        while IFS= read -r -d '' file; do
+            id=${file##*/}; id=${id%."$version".nupkg}
+            ids+=("$id")
+        done < <(find "$FEED/nuget" -type f -name "*.$version.nupkg" -print0)
+    fi
+    [ ${#ids[@]} -gt 0 ] || die 'no matching NuGet package IDs found'
+    for id in "${ids[@]}"; do
+        [[ "$id" =~ ^[A-Za-z0-9_.-]+$ ]] || die "invalid package ID: $id"
+        [ -f "$FEED/nuget/$id.$version.nupkg" ] || die "package missing from feed: $id $version"
+    done
+    while IFS= read -r -d '' file; do
+        case "$file" in
+            nuget.config|NuGet.Config|NuGet.config)
+                if grep -q '<packageSourceMapping' "$repo/$file"; then config=$repo/$file; fi ;;
+        esac
+    done < <(git -C "$repo" ls-files -z)
+    if [ -n "$config" ]; then
+        if ! grep -q '</packageSources>' "$config" || ! grep -q '</packageSourceMapping>' "$config"; then
+            die 'cannot overlay incomplete source mapping configuration'
+        fi
+        if grep -q 'key="cratis-local"' "$config"; then die 'source key cratis-local already exists'; fi
+    fi
+    if [ "$DRY" -eq 1 ]; then
+        quote_command mkdir -p "$session"
+        printf 'write %s importing %s; override %s IDs to %s\n' "$session/Directory.Packages.props" "$props" "${#ids[@]}" "$version"
+        printf 'write %s/env%s\n' "$session" "${config:+ and nuget.config}"
+        return 0
+    fi
+    register_session "$repo" "$session" "$version"
+    {
+        printf '<Project>\n  <Import Project="%s" />\n' "$(xml_escape "$props")"
+        printf '  <PropertyGroup><CentralPackageTransitivePinningEnabled>true</CentralPackageTransitivePinningEnabled></PropertyGroup>\n  <ItemGroup>\n'
+        for id in "${ids[@]}"; do
+            action=Include
+            if grep -Fxiq -- "$id" "$TMP/consumer-ids"; then action=Update; fi
+            printf '    <PackageVersion %s="%s" Version="%s" />\n' "$action" "$id" "$version"
+        done
+        printf '  </ItemGroup>\n</Project>\n'
+    } > "$session/Directory.Packages.props"
+    props_key=DirectoryPackages"PropsPath"; sources_key=RestoreAdditional"ProjectSources"
+    {
+        printf 'export %s=%q\n' "$props_key" "$session/Directory.Packages.props"
+        printf 'export %s=%q\n' "$sources_key" "$FEED/nuget"
+    } > "$session/env"
+    printf ' %q' "-p:$props_key=$session/Directory.Packages.props" "-p:$sources_key=$FEED/nuget"; printf '\n'
+    printf 'source %q\n' "$session/env"
+    if [ -n "$config" ]; then
+        source_mapping "$config" "$session/nuget.config" "${ids[@]}"
+        printf 'For restore, also pass: --configfile %q\n' "$session/nuget.config"
+    elif [ -f "$session/nuget.config" ]; then
+        rm -- "$session/nuget.config"
+    fi
+    printf 'overrode %s NuGet package IDs\n' "${#ids[@]}"
+}
+
+use_npm() {
+    [ $# -eq 2 ] || die 'use-npm requires consumer and stamp'
+    local repo version session backup
+    repo=$(repo_root "$1"); version=$2
+    valid_stamp "$version"; need node; need tar; scratch
+    session=$(session_path "$repo"); backup=$session/npm-backup
+    [ -f "$repo/package.json" ] || die 'consumer has no root package.json'
+    [ ! -e "$backup" ] || die "active npm backup exists: $backup; restore first"
+    node - "$repo" "$FEED/npm" "$version" "$TMP/package.json" <<'NODE'
+const fs = require('fs'), path = require('path'), {execFileSync} = require('child_process');
+const [repo, feed, stamp, output] = process.argv.slice(2);
+const root = JSON.parse(fs.readFileSync(path.join(repo, 'package.json'), 'utf8'));
+let count = 0;
+for (const file of fs.existsSync(feed) ? fs.readdirSync(feed) : []) {
+    if (!file.endsWith('-' + stamp + '.tgz')) continue;
+    const tarball = path.join(feed, file);
+    // Read the packed name: slugified scoped names are not reversibly encoded.
+    const {name} = JSON.parse(execFileSync('tar', ['-xOf', tarball, 'package/package.json'], {encoding: 'utf8'}));
+    if (typeof name !== 'string' || !/^(@[^/\s]+\/)?[^/\s]+$/.test(name))
+        throw new Error('Invalid packed package name: ' + tarball);
+    root.resolutions = root.resolutions || {};
+    root.resolutions[name] = 'file:' + tarball;
+    count++;
+}
+if (!count) { console.error('ERROR: no matching npm tarballs'); process.exit(2); }
+fs.writeFileSync(output, JSON.stringify(root, null, 2) + '\n');
+console.log(`overrode ${count} npm packages`);
+NODE
+    if [ "$DRY" -eq 1 ]; then
+        quote_command mkdir -p "$backup"
+        quote_command cp "$TMP/package.json" "$repo/package.json"
+        return 0
+    fi
+    register_session "$repo" "$session" "$version"
+    mkdir "$backup"
+    cp -p "$repo/package.json" "$backup/package.json"
+    if [ -f "$repo/yarn.lock" ]; then cp -p "$repo/yarn.lock" "$backup/yarn.lock"; fi
+    git -C "$repo" diff HEAD -- package.json yarn.lock > "$backup/before.diff"
+    cp "$TMP/package.json" "$backup/expected-package.json"
+    cp "$TMP/package.json" "$repo/package.json"
+    printf 'Next: cd %q && yarn install\n' "$repo"
+    printf 'Vite: clear stale prebundles with rm -rf node_modules/.vite\n'
+}
+
+restore() {
+    [ $# -eq 1 ] || die 'restore requires a consumer'
+    local repo session backup
+    repo=$(repo_root "$1"); session=$(session_path "$repo"); backup=$session/npm-backup
+    validate_session "$session"
+    if [ -f "$session/repo" ] && [ "$(cat "$session/repo")" != "$repo" ]; then die 'session belongs to another checkout'; fi
+    if [ -d "$backup" ]; then
+        if ! cmp -s "$repo/package.json" "$backup/expected-package.json" ||
+            { [ -f "$backup/yarn.lock" ] && ! cmp -s "$repo/yarn.lock" "$backup/yarn.lock"; } ||
+            { [ ! -f "$backup/yarn.lock" ] && [ -e "$repo/yarn.lock" ]; }; then
+            need node
+            node "$(dirname "$SELF")/npm-restore-check.cjs" "$repo" "$backup" ||
+                die "npm files changed beyond the overlay; review $backup (nothing restored)"
+        fi
+        mutate cp -p "$backup/package.json" "$repo/package.json"
+        if [ -f "$backup/yarn.lock" ]; then mutate cp -p "$backup/yarn.lock" "$repo/yarn.lock"; else mutate rm -f -- "$repo/yarn.lock"; fi
+        mutate rm -rf -- "$backup"
+    fi
+    mutate rm -f -- "$session/Directory.Packages.props" "$session/nuget.config" "$session/env" "$session/stamp"
+    if [ "$DRY" -eq 0 ]; then check "$repo"; fi
+}
+
+# Check only changed lines, not unchanged context or removed local overrides.
+# NUL-delimited Git paths preserve spaces; diagnostics are relative to the root.
+check() {
+    [ $# -ge 1 ] && [ $# -le 2 ] || die 'check requires repo and optional --staged'
+    local repo path count=0 hits=0 staged=0
+    repo=$(repo_root "$1"); shift
+    if [ $# -gt 0 ]; then [ "$1" = --staged ] || die "unknown check option: $1"; staged=1; fi
+    scratch
+    if [ "$staged" -eq 1 ]; then
+        git -C "$repo" diff --cached --name-only -z --diff-filter=ACMRT > "$TMP/tracked"
+    else
+        git -C "$repo" diff HEAD --name-only -z --diff-filter=ACMRT > "$TMP/tracked"
+    fi
+    git -C "$repo" ls-files --others --exclude-standard -z > "$TMP/untracked"
+    while IFS= read -r -d '' path; do
+        count=$((count + 1))
+        if [ "$staged" -eq 1 ]; then
+            git -C "$repo" diff --cached --no-ext-diff --no-textconv --unified=0 -- "$path" > "$TMP/diff"
+        else
+            git -C "$repo" diff HEAD --no-ext-diff --no-textconv --unified=0 -- "$path" > "$TMP/diff"
+        fi
+        awk '/^@@ / { split($3,a,","); n=substr(a[1],2); next } /^\+\+\+/ { next } /^\+/ { print n ":" substr($0,2); n++; next } /^ / { n++ }' "$TMP/diff" > "$TMP/lines"
+        scan_lines "$path" "$TMP/lines" > "$TMP/hits"
+        if [ -s "$TMP/hits" ]; then cat "$TMP/hits"; hits=$((hits + 1)); fi
+    done < "$TMP/tracked"
+    while IFS= read -r -d '' path; do
+        [ ! -L "$repo/$path" ] || die "cannot scan untracked symlink without following outside repo: $path"
+        [ -f "$repo/$path" ] || continue
+        count=$((count + 1))
+        awk '{print NR ":" $0}' "$repo/$path" > "$TMP/lines"
+        scan_lines "$path" "$TMP/lines" > "$TMP/hits"
+        if [ -s "$TMP/hits" ]; then cat "$TMP/hits"; hits=$((hits + 1)); fi
+    done < "$TMP/untracked"
+    printf 'checked %s files, %s leaks\n' "$count" "$hits"
+    [ "$hits" -eq 0 ]
+}
+scan_lines() {
+    local path=$1 input=$2
+    awk -v path="$path" -v feed="$FEED" '
+        function hit(pattern) { print path ":" number ":" pattern }
+        {
+            number=$0; sub(/:.*/,"",number); line=$0; sub(/^[^:]*:/,"",line)
+            if (line ~ /-local\.[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]\.g[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]/) hit("local stamp")
+            if (index(line,feed)) hit("local feed path")
+            if (index(line,"DirectoryPackages" "PropsPath")) hit("CPM overlay property")
+            if (index(line,"RestoreAdditional" "ProjectSources")) hit("additional restore sources")
+            if (line ~ /<PackageVersion[[:space:]]+Update[[:space:]]*=/) hit("package version override")
+            if (path ~ /(^|\/)(package.json|yarn.lock)$/ && line ~ /(file|portal|link):/ &&
+                (line ~ /\.tgz/ || line ~ /(file|portal|link):(\/|\.\.?\/|~\/|[A-Za-z]:)/)) hit("local npm reference")
+        }
+    ' "$input"
+}
+
+# Portable deadline for a read-only Docker probe; no dependency on GNU timeout.
+bounded_docker() {
+    local pid second status=0
+    docker "$@" > "$TMP/docker-output" 2> "$TMP/docker-error" & pid=$!
+    for ((second=0; second<10; second++)); do
+        if ! kill -0 "$pid" 2>/dev/null; then break; fi
+        sleep 1
+    done
+    if kill -0 "$pid" 2>/dev/null; then
+        kill -TERM "$pid" 2>/dev/null || :
+        kill -KILL "$pid" 2>/dev/null || :
+        wait "$pid" 2>/dev/null || :
+        return 1
+    fi
+    wait "$pid" || status=$?
+    return "$status"
+}
+local_artifact() {
+    [[ "$1" =~ -local\.[0-9]{12}\.g[0-9a-f]{7}($|[^0-9A-Za-z]) ]]
+}
+clean() {
+    local version='' apply=0 consumer='' arg path cache image session maximum count=0
+    local subjects=() kinds=()
+    while [ $# -gt 0 ]; do
+        arg=$1; shift
+        case "$arg" in
+            --stamp) [ $# -gt 0 ] || die '--stamp requires a stamp'; [ -z "$version" ] || die 'choose --stamp or --all'; version=$1; shift; valid_stamp "$version" ;;
+            --all) [ -z "$version" ] || die 'choose --stamp or --all'; version=all ;;
+            --apply) apply=1 ;;
+            -*) die "unknown clean option: $arg" ;;
+            *) [ -z "$consumer" ] || die 'clean takes at most one consumer'; consumer=$(repo_root "$arg") ;;
+        esac
+    done
+    maximum=${CRATIS_LOCAL_CLEAN_MAX:-500}
+    [[ "$maximum" =~ ^[0-9]+$ ]] || die 'CRATIS_LOCAL_CLEAN_MAX must be a whole number'
+    [ ${#maximum} -le 6 ] || die 'CRATIS_LOCAL_CLEAN_MAX is too large'
+    maximum=$((10#$maximum))
+    scratch
+    for cache in "$FEED/nuget" "$FEED/npm"; do
+        [ -d "$cache" ] || continue
+        while IFS= read -r -d '' path; do
+            local_artifact "${path##*/}" || continue
+            if [ -n "$version" ] && [ "$version" != all ]; then case "$path" in *"$version"*) ;; *) continue ;; esac; fi
+            subjects+=("$path"); kinds+=(file)
+        done < <(find "$cache" -type f \( -name '*.nupkg' -o -name '*.tgz' \) -print0)
+    done
+    if [ -d "$NUGET_CACHE" ]; then
+        for cache in "$NUGET_CACHE"/*; do
+            [ -d "$cache" ] && [ ! -L "$cache" ] || continue
+            for path in "$cache"/*-local.*; do
+                [ -d "$path" ] && [ ! -L "$path" ] || continue
+                local_artifact "${path##*/}" || continue
+                if [ -n "$version" ] && [ "$version" != all ] && [ "${path##*/}" != "$version" ]; then continue; fi
+                subjects+=("$path"); kinds+=(directory)
+            done
+        done
+    fi
+    if command -v yarn >/dev/null 2>&1 && [ -n "$consumer" ]; then
+        cache=$(cd "$consumer" && yarn config get cacheFolder) || die 'cannot discover Yarn cache'
+        if [ -d "$cache" ]; then
+            while IFS= read -r -d '' path; do
+                local_artifact "${path##*/}" || continue
+                if [ -n "$version" ] && [ "$version" != all ]; then case "$path" in *"$version"*) ;; *) continue ;; esac; fi
+                subjects+=("$path"); kinds+=(file)
+            done < <(find "$cache" -type f -name '*-local.*' -print0)
+        fi
+    else
+        printf 'SKIP: Yarn cache discovery needs yarn and an explicit consumer\n' >&2
+    fi
+    if command -v docker >/dev/null 2>&1; then
+        if bounded_docker image ls --format '{{.Repository}}:{{.Tag}}'; then
+            while IFS= read -r image; do
+                local_artifact "${image##*:}" || continue
+                if [ -n "$version" ] && [ "$version" != all ]; then case "${image##*:}" in *"$version"*) ;; *) continue ;; esac; fi
+                subjects+=("$image"); kinds+=(image)
+            done < "$TMP/docker-output"
+        else
+            printf 'SKIP: Docker unavailable or did not respond within 10 seconds\n' >&2
+        fi
+    else printf 'SKIP: docker is not on PATH\n' >&2; fi
+    if [ -f "$FEED/sessions" ]; then cat "$FEED/sessions" > "$TMP/sessions"; else : > "$TMP/sessions"; fi
+    if [ -n "$consumer" ]; then session_path "$consumer" >> "$TMP/sessions"; fi
+    sort -u "$TMP/sessions" > "$TMP/unique-sessions"
+    while IFS= read -r session; do
+        [ -d "$session" ] && [ -f "$session/repo" ] && [ -f "$session/stamp" ] || continue
+        local_artifact "$(cat "$session/stamp")" || continue
+        if [ -n "$version" ] && [ "$version" != all ] && [ "$(cat "$session/stamp")" != "$version" ]; then continue; fi
+        [ ! -L "$session" ] && [ "$session" != / ] || die "unsafe session: $session"
+        validate_session "$session"
+        path=$(cat "$session/repo")
+        [ "$(session_path "$path")" = "$session" ] || die "session directory no longer matches repository: $session"
+        [ ! -d "$session/npm-backup" ] || die "unresolved npm backup: $session; restore before cleaning"
+        subjects+=("$session"); kinds+=(session)
+    done < "$TMP/unique-sessions"
+    count=${#subjects[@]}
+    [ "$count" -le "$maximum" ] || die "clean fuse: $count subjects exceeds $maximum"
+    for ((arg=0; arg<count; arg++)); do printf '%s: %s\n' "${kinds[$arg]}" "${subjects[$arg]}"; done
+    if [ "$apply" -eq 1 ] && [ "$DRY" -eq 0 ]; then
+        for ((arg=0; arg<count; arg++)); do
+            path=${subjects[$arg]}
+            case "${kinds[$arg]}" in
+                image) docker rmi "$path" ;;
+                file) [ -f "$path" ] && [ ! -L "$path" ] || die "clean subject changed: $path"; rm -- "$path" ;;
+                directory) [ -d "$path" ] && [ ! -L "$path" ] || die "clean subject changed: $path"; rm -rf -- "$path" ;;
+                session)
+                    [ -f "$path/stamp" ] && [ ! -L "$path" ] && [ ! -e "$path/npm-backup" ] || die "session changed: $path"
+                    validate_session "$path"
+                    rm -f -- "$path/repo" "$path/stamp" "$path/env" "$path/Directory.Packages.props" "$path/nuget.config"
+                    rmdir -- "$path" ;;
+            esac
+        done
+        printf 'removed %s subjects\n' "$count"
+    else printf 'dry-run: %s subjects (use --apply to remove)\n' "$count"; fi
+}
+
+self_test() {
+    [ $# -eq 0 ] || die '--self-test takes no arguments'
+    local root home repo feed version output status passed=0 skipped=0 test_key arg
+    scratch; root=$TMP/self-test; mkdir -p "$root/home" "$root/repo"
+    home=$root/home; repo=$root/repo; feed=$home/.cache/cratis/local-feed
+    # System-only tests stay hermetic; npm tests inherit PATH to discover node.
+    # Both isolate HOME/config and omit the host adapter.
+    st() { env -i HOME="$home" PATH=/usr/bin:/bin:/usr/sbin:/sbin TMPDIR="$TMP" /bin/bash "$SELF" "$@"; }
+    st_npm() { env -i HOME="$home" PATH="$PATH" TMPDIR="$TMP" /bin/bash "$SELF" "$@"; }
+    git -C "$repo" init -q
+    repo=$(repo_root "$repo")
+    git -C "$repo" config user.email test@example.invalid
+    git -C "$repo" config user.name 'Local package self-test'
+    printf '<Project><ItemGroup><PackageVersion Include="Cratis.Test" Version="1.2.3" /></ItemGroup></Project>\n' > "$repo/Directory.Packages.props"
+    printf '{"private":true,"dependencies":{"@cratis/test":"1.2.3"}}\n' > "$repo/package.json"
+    cat > "$repo/yarn.lock" <<'LOCK'
+# This file is generated by running "yarn install" inside your project.
+
+__metadata:
+  version: 8
+  cacheKey: 10c0
+
+"@cratis/test@npm:1.2.3":
+  version: 1.2.3
+  resolution: "@cratis/test@npm:1.2.3"
+  checksum: original
+  languageName: node
+  linkType: hard
+
+"unrelated@npm:1.0.0":
+  version: 1.0.0
+  resolution: "unrelated@npm:1.0.0"
+  checksum: keep
+  languageName: node
+  linkType: hard
+LOCK
+    printf 'clean\n' > "$repo/probe"
+    git -C "$repo" add .; git -C "$repo" commit -qm initial; git -C "$repo" tag v1.2.3
+    status=0; st > "$root/output" || status=$?
+    if [ "$status" -ne 2 ] || ! grep -q '^Usage:' "$root/output"; then
+        failed 'self-test: no arguments must show usage and exit 2'
+    fi
+    passed=$((passed + 1))
+    version=$(st stamp "$repo")
+    [[ "$version" =~ ^1\.2\.4-local\.[0-9]{12}\.g[0-9a-f]{7}$ ]] || failed 'self-test: stamp format'
+    passed=$((passed + 1))
+    mkdir -p "$feed/nuget" "$feed/npm"
+    : > "$feed/nuget/Cratis.Test.1.2.4-local.200001010000.g1234567.nupkg"
+    st --dry-run use-nuget "$repo" 1.2.4-local.200001010000.g1234567 Cratis.Test > "$root/output"
+    status=0; st --dry-run use-nuget "$repo" 1.2.4-local.200001010000.1234567 Cratis.Test > "$root/output" 2>&1 || status=$?
+    [ "$status" -eq 2 ] || failed 'self-test: unprefixed numeric SHA accepted'
+    rm "$feed/nuget/Cratis.Test.1.2.4-local.200001010000.g1234567.nupkg"
+    passed=$((passed + 2))
+    : > "$feed/nuget/Cratis.Test.$version.nupkg"
+    : > "$feed/nuget/Cratis.Transitive.$version.nupkg"
+    mkdir -p "$root/tarball/package"
+    for arg in test transitive; do
+        printf '{"name":"@cratis/%s","version":"%s"}\n' "$arg" "$version" > "$root/tarball/package/package.json"
+        tar -czf "$feed/npm/@cratis-$arg-$version.tgz" -C "$root/tarball" package
+    done
+    st use-nuget "$repo" "$version" > "$root/output"
+    output=$(git -C "$repo" rev-parse --absolute-git-dir)/cratis-local
+    grep -Fq "Import Project=\"$repo/Directory.Packages.props\"" "$output/Directory.Packages.props" || failed 'self-test: overlay import'
+    grep -Fq "PackageVersion Update=\"Cratis.Test\" Version=\"$version\"" "$output/Directory.Packages.props" || failed 'self-test: pinned package Update'
+    grep -Fq "PackageVersion Include=\"Cratis.Transitive\" Version=\"$version\"" "$output/Directory.Packages.props" || failed 'self-test: transitive package Include'
+    grep -Fq 'CentralPackageTransitivePinningEnabled>true' "$output/Directory.Packages.props" || failed 'self-test: transitive pinning'
+    test_key=DirectoryPackages"PropsPath"
+    grep -Fq "export $test_key=" "$output/env" || failed 'self-test: env property'
+    passed=$((passed + 5))
+    st check "$repo" > "$root/output" || failed 'self-test: clean repo'
+    passed=$((passed + 1))
+    for test_key in stamp npm props sources override feed; do
+        case "$test_key" in
+            stamp) printf '%s\n' "$version" > "$repo/probe" ;;
+            npm) printf '{"resolutions":{"@cratis/test":"%s%s"}}\n' 'file:/tmp/' 'package.tgz' > "$repo/package.json" ;;
+            props) printf '%s=/tmp/overlay\n' DirectoryPackages"PropsPath" > "$repo/probe" ;;
+            sources) printf '%s=/tmp/feed\n' RestoreAdditional"ProjectSources" > "$repo/probe" ;;
+            override) printf '<PackageVersion %s="Cratis.Test" />\n' Update > "$repo/probe" ;;
+            feed) printf '%s\n' "$feed" > "$repo/probe" ;;
+        esac
+        status=0; st check "$repo" > "$root/output" || status=$?
+        [ "$status" -eq 1 ] || failed "self-test: did not find $test_key leak"
+        passed=$((passed + 1))
+        git -C "$repo" checkout -- probe package.json
+    done
+    printf '%s\n' "$version" > "$repo/untracked"
+    status=0; st check "$repo" > "$root/output" || status=$?
+    [ "$status" -eq 1 ] || failed 'self-test: untracked leak'
+    rm "$repo/untracked"; passed=$((passed + 1))
+    printf '%s\n' "$version" > "$repo/probe"; git -C "$repo" add probe
+    printf 'clean again\n' > "$repo/probe"
+    status=0; st check "$repo" --staged > "$root/output" || status=$?
+    [ "$status" -eq 1 ] || failed 'self-test: staged content'
+    git -C "$repo" restore --staged probe; git -C "$repo" checkout -- probe
+    passed=$((passed + 1))
+    if command -v node >/dev/null 2>&1; then
+        # Preserve pre-existing user edits as well as the committed contents.
+        st_npm use-npm "$repo" "$version"
+        grep -Fq '"@cratis/transitive": "file:' "$repo/package.json" || failed 'self-test: transitive npm resolution'
+        grep -Fq '"@cratis/test": "file:' "$repo/package.json" || failed 'self-test: direct npm resolution'
+        st_npm restore "$repo" > "$root/output"
+        passed=$((passed + 2))
+        printf '{"private":true,"dependencies":{"@cratis/test":"1.2.3"},"userSetting":true}\n' > "$repo/package.json"
+        cp "$repo/package.json" "$root/original-package.json"
+        cp "$repo/yarn.lock" "$root/original-yarn.lock"
+        st_npm use-npm "$repo" "$version"
+        # Model Yarn's replacement of a remote entry with a file-tarball entry.
+        node - "$repo/yarn.lock" "$feed/npm/@cratis-test-$version.tgz" "$version" <<'NODE'
+const fs = require('fs');
+const [file, input, stamp] = process.argv.slice(2);
+const tarball = require('path').normalize(input);
+const lock = fs.readFileSync(file, 'utf8');
+fs.writeFileSync(file, lock.replace(/"@cratis\/test@npm:1\.2\.3":[\s\S]*?(?="unrelated)/,
+    `"@cratis/test@file:${tarball}::locator=consumer%40workspace%3A.":\n` +
+    `  version: ${stamp}\n  resolution: "@cratis/test@file:${tarball}::hash=abc&locator=consumer%40workspace%3A."\n` +
+    '  checksum: local\n  languageName: node\n  linkType: hard\n\n'));
+NODE
+        cp "$repo/yarn.lock" "$root/overlay-yarn.lock"
+        sed 's|^"@cratis/test@file:.*":$|"@cratis/test@npm:1.2.3":|' "$root/overlay-yarn.lock" > "$repo/yarn.lock"
+        node "$(dirname "$SELF")/npm-restore-check.cjs" "$repo" "$output/npm-backup" || failed 'self-test: local resolution with original descriptor'
+        passed=$((passed + 1))
+        cp "$root/overlay-yarn.lock" "$repo/yarn.lock"
+        printf '\n"unrelated-user-addition@npm:2":\n  version: 2\n' >> "$repo/yarn.lock"
+        status=0; st_npm restore "$repo" > "$root/output" 2>&1 || status=$?
+        [ "$status" -eq 2 ] && [ -d "$output/npm-backup" ] || failed 'self-test: unrelated lockfile addition refused'
+        grep -Fq 'file:' "$repo/package.json" || failed 'self-test: partial restore on conflict'
+        passed=$((passed + 2))
+        sed 's/checksum: keep/checksum: user-edit/' "$root/overlay-yarn.lock" > "$repo/yarn.lock"
+        status=0; st_npm restore "$repo" > "$root/output" 2>&1 || status=$?
+        [ "$status" -eq 2 ] || failed 'self-test: unrelated lockfile edit refused'
+        passed=$((passed + 1))
+        cp "$root/overlay-yarn.lock" "$repo/yarn.lock"
+        node - "$repo/package.json" <<'NODE'
+const fs = require('fs'), file = process.argv[2];
+const json = JSON.parse(fs.readFileSync(file)); json.userSetting = false;
+fs.writeFileSync(file, JSON.stringify(json));
+NODE
+        status=0; st_npm restore "$repo" > "$root/output" 2>&1 || status=$?
+        [ "$status" -eq 2 ] || failed 'self-test: unrelated manifest edit refused'
+        passed=$((passed + 1))
+        cp "$output/npm-backup/expected-package.json" "$repo/package.json"
+        st_npm restore "$repo" > "$root/output"
+        cmp -s "$repo/package.json" "$root/original-package.json" || failed 'self-test: npm restore preserves prior manifest edits'
+        cmp -s "$repo/yarn.lock" "$root/original-yarn.lock" || failed 'self-test: npm restore after install'
+        [ ! -d "$output/npm-backup" ] || failed 'self-test: resolved backup removed'
+        passed=$((passed + 3))
+        git -C "$repo" checkout -- package.json
+    else printf 'SKIP: npm mutation/restore needs node on inherited PATH\n'; skipped=$((skipped + 10)); fi
+    mkdir -p "$home/.nuget/packages/cratis.test/$version" "$home/.nuget/packages/cratis.test/1.2.3"
+    mkdir -p "$home/.nuget/packages/cratis.test/1.2.3-local.keep"
+    for arg in nuget npm; do
+        : > "$feed/$arg/keep-local.notes.tgz"
+        : > "$feed/$arg/keep-local.202610221735.g12345678.tgz"
+    done
+    for arg in default --all; do
+        if [ "$arg" = default ]; then st clean > "$root/output"; else st clean "$arg" > "$root/output"; fi
+        grep -Fq "$version" "$root/output" || failed 'self-test: clean finds stamped subjects'
+        if grep -Eq 'keep-local|local.keep' "$root/output"; then failed 'self-test: clean selected non-stamp'; fi
+        passed=$((passed + 2))
+    done
+    st clean --stamp "$version" > "$root/output"
+    grep -Fq "$home/.nuget/packages/cratis.test/$version" "$root/output" || failed 'self-test: clean lists local cache'
+    [ -d "$home/.nuget/packages/cratis.test/$version" ] || failed 'self-test: dry-run mutated cache'
+    st clean --stamp "$version" --apply > "$root/output"
+    [ ! -e "$home/.nuget/packages/cratis.test/$version" ] || failed 'self-test: clean failed to remove cache'
+    [ -d "$home/.nuget/packages/cratis.test/1.2.3" ] || failed 'self-test: clean removed real version'
+    passed=$((passed + 4))
+    printf 'SKIP: real dotnet/Yarn/Docker packing is not a hermetic self-test\n'; skipped=$((skipped + 3))
+    printf 'self-test: %s passed, %s skipped\n' "$passed" "$skipped"
+}
+
+case "$MODE" in
+    stamp) stamp "$@" ;;
+    pack-nuget) pack_nuget "$@" ;;
+    pack-npm) pack_npm "$@" ;;
+    use-nuget) use_nuget "$@" ;;
+    use-npm) use_npm "$@" ;;
+    restore) restore "$@" ;;
+    check) check "$@" ;;
+    clean) clean "$@" ;;
+    --self-test) self_test "$@" ;;
+    *) die "unknown command: $MODE (use --help)" ;;
+esac