@cpp.js/package-zlib 1.0.0-beta.20 → 1.0.0-beta.21

package/.cppjs/build/source/examples/zran.c

@@ -1,533 +0,0 @@
-/* zran.c -- example of deflate stream indexing and random access
- * Copyright (C) 2005, 2012, 2018, 2023 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- * Version 1.4  13 Apr 2023  Mark Adler */
-
-/* Version History:
- 1.0  29 May 2005  First version
- 1.1  29 Sep 2012  Fix memory reallocation error
- 1.2  14 Oct 2018  Handle gzip streams with multiple members
-                   Add a header file to facilitate usage in applications
- 1.3  18 Feb 2023  Permit raw deflate streams as well as zlib and gzip
-                   Permit crossing gzip member boundaries when extracting
-                   Support a size_t size when extracting (was an int)
-                   Do a binary search over the index for an access point
-                   Expose the access point type to enable save and load
- 1.4  13 Apr 2023  Add a NOPRIME define to not use inflatePrime()
- */
-
-// Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
-// for random access of a compressed file. A file containing a raw deflate
-// stream is provided on the command line. The compressed stream is decoded in
-// its entirety, and an index built with access points about every SPAN bytes
-// in the uncompressed output. The compressed file is left open, and can then
-// be read randomly, having to decompress on the average SPAN/2 uncompressed
-// bytes before getting to the desired block of data.
-//
-// An access point can be created at the start of any deflate block, by saving
-// the starting file offset and bit of that block, and the 32K bytes of
-// uncompressed data that precede that block. Also the uncompressed offset of
-// that block is saved to provide a reference for locating a desired starting
-// point in the uncompressed stream. deflate_index_build() decompresses the
-// input raw deflate stream a block at a time, and at the end of each block
-// decides if enough uncompressed data has gone by to justify the creation of a
-// new access point. If so, that point is saved in a data structure that grows
-// as needed to accommodate the points.
-//
-// To use the index, an offset in the uncompressed data is provided, for which
-// the latest access point at or preceding that offset is located in the index.
-// The input file is positioned to the specified location in the index, and if
-// necessary the first few bits of the compressed data is read from the file.
-// inflate is initialized with those bits and the 32K of uncompressed data, and
-// decompression then proceeds until the desired offset in the file is reached.
-// Then decompression continues to read the requested uncompressed data from
-// the file.
-//
-// There is some fair bit of overhead to starting inflation for the random
-// access, mainly copying the 32K byte dictionary. If small pieces of the file
-// are being accessed, it would make sense to implement a cache to hold some
-// lookahead to avoid many calls to deflate_index_extract() for small lengths.
-//
-// Another way to build an index would be to use inflateCopy(). That would not
-// be constrained to have access points at block boundaries, but would require
-// more memory per access point, and could not be saved to a file due to the
-// use of pointers in the state. The approach here allows for storage of the
-// index in a file.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <limits.h>
-#include "zlib.h"
-#include "zran.h"
-
-#define WINSIZE 32768U      // sliding window size
-#define CHUNK 16384         // file input buffer size
-
-// See comments in zran.h.
-void deflate_index_free(struct deflate_index *index) {
-    if (index != NULL) {
-        free(index->list);
-        free(index);
-    }
-}
-
-// Add an access point to the list. If out of memory, deallocate the existing
-// list and return NULL. index->mode is temporarily the allocated number of
-// access points, until it is time for deflate_index_build() to return. Then
-// index->mode is set to the mode of inflation.
-static struct deflate_index *add_point(struct deflate_index *index, int bits,
-                                       off_t in, off_t out, unsigned left,
-                                       unsigned char *window) {
-    if (index == NULL) {
-        // The list is empty. Create it, starting with eight access points.
-        index = malloc(sizeof(struct deflate_index));
-        if (index == NULL)
-            return NULL;
-        index->have = 0;
-        index->mode = 8;
-        index->list = malloc(sizeof(point_t) * index->mode);
-        if (index->list == NULL) {
-            free(index);
-            return NULL;
-        }
-    }
-
-    else if (index->have == index->mode) {
-        // The list is full. Make it bigger.
-        index->mode <<= 1;
-        point_t *next = realloc(index->list, sizeof(point_t) * index->mode);
-        if (next == NULL) {
-            deflate_index_free(index);
-            return NULL;
-        }
-        index->list = next;
-    }
-
-    // Fill in the access point and increment how many we have.
-    point_t *next = (point_t *)(index->list) + index->have++;
-    if (index->have < 0) {
-        // Overflowed the int!
-        deflate_index_free(index);
-        return NULL;
-    }
-    next->out = out;
-    next->in = in;
-    next->bits = bits;
-    if (left)
-        memcpy(next->window, window + WINSIZE - left, left);
-    if (left < WINSIZE)
-        memcpy(next->window + left, window, WINSIZE - left);
-
-    // Return the index, which may have been newly allocated or destroyed.
-    return index;
-}
-
-// Decompression modes. These are the inflateInit2() windowBits parameter.
-#define RAW -15
-#define ZLIB 15
-#define GZIP 31
-
-// See comments in zran.h.
-int deflate_index_build(FILE *in, off_t span, struct deflate_index **built) {
-    // Set up inflation state.
-    z_stream strm = {0};        // inflate engine (gets fired up later)
-    unsigned char buf[CHUNK];   // input buffer
-    unsigned char win[WINSIZE] = {0};   // output sliding window
-    off_t totin = 0;            // total bytes read from input
-    off_t totout = 0;           // total bytes uncompressed
-    int mode = 0;               // mode: RAW, ZLIB, or GZIP (0 => not set yet)
-
-    // Decompress from in, generating access points along the way.
-    int ret;                    // the return value from zlib, or Z_ERRNO
-    off_t last;                 // last access point uncompressed offset
-    struct deflate_index *index = NULL;     // list of access points
-    do {
-        // Assure available input, at least until reaching EOF.
-        if (strm.avail_in == 0) {
-            strm.avail_in = fread(buf, 1, sizeof(buf), in);
-            totin += strm.avail_in;
-            strm.next_in = buf;
-            if (strm.avail_in < sizeof(buf) && ferror(in)) {
-                ret = Z_ERRNO;
-                break;
-            }
-
-            if (mode == 0) {
-                // At the start of the input -- determine the type. Assume raw
-                // if it is neither zlib nor gzip. This could in theory result
-                // in a false positive for zlib, but in practice the fill bits
-                // after a stored block are always zeros, so a raw stream won't
-                // start with an 8 in the low nybble.
-                mode = strm.avail_in == 0 ? RAW :       // empty -- will fail
-                       (strm.next_in[0] & 0xf) == 8 ? ZLIB :
-                       strm.next_in[0] == 0x1f ? GZIP :
-                       /* else */ RAW;
-                ret = inflateInit2(&strm, mode);
-                if (ret != Z_OK)
-                    break;
-            }
-        }
-
-        // Assure available output. This rotates the output through, for use as
-        // a sliding window on the uncompressed data.
-        if (strm.avail_out == 0) {
-            strm.avail_out = sizeof(win);
-            strm.next_out = win;
-        }
-
-        if (mode == RAW && index == NULL)
-            // We skip the inflate() call at the start of raw deflate data in
-            // order generate an access point there. Set data_type to imitate
-            // the end of a header.
-            strm.data_type = 0x80;
-        else {
-            // Inflate and update the number of uncompressed bytes.
-            unsigned before = strm.avail_out;
-            ret = inflate(&strm, Z_BLOCK);
-            totout += before - strm.avail_out;
-        }
-
-        if ((strm.data_type & 0xc0) == 0x80 &&
-            (index == NULL || totout - last >= span)) {
-            // We are at the end of a header or a non-last deflate block, so we
-            // can add an access point here. Furthermore, we are either at the
-            // very start for the first access point, or there has been span or
-            // more uncompressed bytes since the last access point, so we want
-            // to add an access point here.
-            index = add_point(index, strm.data_type & 7, totin - strm.avail_in,
-                              totout, strm.avail_out, win);
-            if (index == NULL) {
-                ret = Z_MEM_ERROR;
-                break;
-            }
-            last = totout;
-        }
-
-        if (ret == Z_STREAM_END && mode == GZIP &&
-            (strm.avail_in || ungetc(getc(in), in) != EOF))
-            // There is more input after the end of a gzip member. Reset the
-            // inflate state to read another gzip member. On success, this will
-            // set ret to Z_OK to continue decompressing.
-            ret = inflateReset2(&strm, GZIP);
-
-        // Keep going until Z_STREAM_END or error. If the compressed data ends
-        // prematurely without a file read error, Z_BUF_ERROR is returned.
-    } while (ret == Z_OK);
-    inflateEnd(&strm);
-
-    if (ret != Z_STREAM_END) {
-        // An error was encountered. Discard the index and return a negative
-        // error code.
-        deflate_index_free(index);
-        return ret == Z_NEED_DICT ? Z_DATA_ERROR : ret;
-    }
-
-    // Shrink the index to only the occupied access points and return it.
-    index->mode = mode;
-    index->length = totout;
-    point_t *list = realloc(index->list, sizeof(point_t) * index->have);
-    if (list == NULL) {
-        // Seems like a realloc() to make something smaller should always work,
-        // but just in case.
-        deflate_index_free(index);
-        return Z_MEM_ERROR;
-    }
-    index->list = list;
-    *built = index;
-    return index->have;
-}
-
-#ifdef NOPRIME
-// Support zlib versions before 1.2.3 (July 2005), or incomplete zlib clones
-// that do not have inflatePrime().
-
-#  define INFLATEPRIME inflatePreface
-
-// Append the low bits bits of value to in[] at bit position *have, updating
-// *have. value must be zero above its low bits bits. bits must be positive.
-// This assumes that any bits above the *have bits in the last byte are zeros.
-// That assumption is preserved on return, as any bits above *have + bits in
-// the last byte written will be set to zeros.
-static inline void append_bits(unsigned value, int bits,
-                               unsigned char *in, int *have) {
-    in += *have >> 3;           // where the first bits from value will go
-    int k = *have & 7;          // the number of bits already there
-    *have += bits;
-    if (k)
-        *in |= value << k;      // write value above the low k bits
-    else
-        *in = value;
-    k = 8 - k;                  // the number of bits just appended
-    while (bits > k) {
-        value >>= k;            // drop the bits appended
-        bits -= k;
-        k = 8;                  // now at a byte boundary
-        *++in = value;
-    }
-}
-
-// Insert enough bits in the form of empty deflate blocks in front of the
-// low bits bits of value, in order to bring the sequence to a byte boundary.
-// Then feed that to inflate(). This does what inflatePrime() does, except that
-// a negative value of bits is not supported. bits must be in 0..16. If the
-// arguments are invalid, Z_STREAM_ERROR is returned. Otherwise the return
-// value from inflate() is returned.
-static int inflatePreface(z_stream *strm, int bits, int value) {
-    // Check input.
-    if (strm == Z_NULL || bits < 0 || bits > 16)
-        return Z_STREAM_ERROR;
-    if (bits == 0)
-        return Z_OK;
-    value &= (2 << (bits - 1)) - 1;
-
-    // An empty dynamic block with an odd number of bits (95). The high bit of
-    // the last byte is unused.
-    static const unsigned char dyn[] = {
-        4, 0xe0, 0x81, 8, 0, 0, 0, 0, 0x20, 0xa8, 0xab, 0x1f
-    };
-    const int dynlen = 95;          // number of bits in the block
-
-    // Build an input buffer for inflate that is a multiple of eight bits in
-    // length, and that ends with the low bits bits of value.
-    unsigned char in[(dynlen + 3 * 10 + 16 + 7) / 8];
-    int have = 0;
-    if (bits & 1) {
-        // Insert an empty dynamic block to get to an odd number of bits, so
-        // when bits bits from value are appended, we are at an even number of
-        // bits.
-        memcpy(in, dyn, sizeof(dyn));
-        have = dynlen;
-    }
-    while ((have + bits) & 7)
-        // Insert empty fixed blocks until appending bits bits would put us on
-        // a byte boundary. This will insert at most three fixed blocks.
-        append_bits(2, 10, in, &have);
-
-    // Append the bits bits from value, which takes us to a byte boundary.
-    append_bits(value, bits, in, &have);
-
-    // Deliver the input to inflate(). There is no output space provided, but
-    // inflate() can't get stuck waiting on output not ingesting all of the
-    // provided input. The reason is that there will be at most 16 bits of
-    // input from value after the empty deflate blocks (which themselves
-    // generate no output). At least ten bits are needed to generate the first
-    // output byte from a fixed block. The last two bytes of the buffer have to
-    // be ingested in order to get ten bits, which is the most that value can
-    // occupy.
-    strm->avail_in = have >> 3;
-    strm->next_in = in;
-    strm->avail_out = 0;
-    strm->next_out = in;                // not used, but can't be NULL
-    return inflate(strm, Z_NO_FLUSH);
-}
-
-#else
-#  define INFLATEPRIME inflatePrime
-#endif
-
-// See comments in zran.h.
-ptrdiff_t deflate_index_extract(FILE *in, struct deflate_index *index,
-                                off_t offset, unsigned char *buf, size_t len) {
-    // Do a quick sanity check on the index.
-    if (index == NULL || index->have < 1 || index->list[0].out != 0)
-        return Z_STREAM_ERROR;
-
-    // If nothing to extract, return zero bytes extracted.
-    if (len == 0 || offset < 0 || offset >= index->length)
-        return 0;
-
-    // Find the access point closest to but not after offset.
-    int lo = -1, hi = index->have;
-    point_t *point = index->list;
-    while (hi - lo > 1) {
-        int mid = (lo + hi) >> 1;
-        if (offset < point[mid].out)
-            hi = mid;
-        else
-            lo = mid;
-    }
-    point += lo;
-
-    // Initialize the input file and prime the inflate engine to start there.
-    int ret = fseeko(in, point->in - (point->bits ? 1 : 0), SEEK_SET);
-    if (ret == -1)
-        return Z_ERRNO;
-    int ch = 0;
-    if (point->bits && (ch = getc(in)) == EOF)
-        return ferror(in) ? Z_ERRNO : Z_BUF_ERROR;
-    z_stream strm = {0};
-    ret = inflateInit2(&strm, RAW);
-    if (ret != Z_OK)
-        return ret;
-    if (point->bits)
-        INFLATEPRIME(&strm, point->bits, ch >> (8 - point->bits));
-    inflateSetDictionary(&strm, point->window, WINSIZE);
-
-    // Skip uncompressed bytes until offset reached, then satisfy request.
-    unsigned char input[CHUNK];
-    unsigned char discard[WINSIZE];
-    offset -= point->out;       // number of bytes to skip to get to offset
-    size_t left = len;          // number of bytes left to read after offset
-    do {
-        if (offset) {
-            // Discard up to offset uncompressed bytes.
-            strm.avail_out = offset < WINSIZE ? (unsigned)offset : WINSIZE;
-            strm.next_out = discard;
-        }
-        else {
-            // Uncompress up to left bytes into buf.
-            strm.avail_out = left < UINT_MAX ? (unsigned)left : UINT_MAX;
-            strm.next_out = buf + len - left;
-        }
-
-        // Uncompress, setting got to the number of bytes uncompressed.
-        if (strm.avail_in == 0) {
-            // Assure available input.
-            strm.avail_in = fread(input, 1, CHUNK, in);
-            if (strm.avail_in < CHUNK && ferror(in)) {
-                ret = Z_ERRNO;
-                break;
-            }
-            strm.next_in = input;
-        }
-        unsigned got = strm.avail_out;
-        ret = inflate(&strm, Z_NO_FLUSH);
-        got -= strm.avail_out;
-
-        // Update the appropriate count.
-        if (offset)
-            offset -= got;
-        else
-            left -= got;
-
-        // If we're at the end of a gzip member and there's more to read,
-        // continue to the next gzip member.
-        if (ret == Z_STREAM_END && index->mode == GZIP) {
-            // Discard the gzip trailer.
-            unsigned drop = 8;              // length of gzip trailer
-            if (strm.avail_in >= drop) {
-                strm.avail_in -= drop;
-                strm.next_in += drop;
-            }
-            else {
-                // Read and discard the remainder of the gzip trailer.
-                drop -= strm.avail_in;
-                strm.avail_in = 0;
-                do {
-                    if (getc(in) == EOF)
-                        // The input does not have a complete trailer.
-                        return ferror(in) ? Z_ERRNO : Z_BUF_ERROR;
-                } while (--drop);
-            }
-
-            if (strm.avail_in || ungetc(getc(in), in) != EOF) {
-                // There's more after the gzip trailer. Use inflate to skip the
-                // gzip header and resume the raw inflate there.
-                inflateReset2(&strm, GZIP);
-                do {
-                    if (strm.avail_in == 0) {
-                        strm.avail_in = fread(input, 1, CHUNK, in);
-                        if (strm.avail_in < CHUNK && ferror(in)) {
-                            ret = Z_ERRNO;
-                            break;
-                        }
-                        strm.next_in = input;
-                    }
-                    strm.avail_out = WINSIZE;
-                    strm.next_out = discard;
-                    ret = inflate(&strm, Z_BLOCK);  // stop at end of header
-                } while (ret == Z_OK && (strm.data_type & 0x80) == 0);
-                if (ret != Z_OK)
-                    break;
-                inflateReset2(&strm, RAW);
-            }
-        }
-
-        // Continue until we have the requested data, the deflate data has
-        // ended, or an error is encountered.
-    } while (ret == Z_OK && left);
-    inflateEnd(&strm);
-
-    // Return the number of uncompressed bytes read into buf, or the error.
-    return ret == Z_OK || ret == Z_STREAM_END ? len - left : ret;
-}
-
-#ifdef TEST
-
-#define SPAN 1048576L       // desired distance between access points
-#define LEN 16384           // number of bytes to extract
-
-// Demonstrate the use of deflate_index_build() and deflate_index_extract() by
-// processing the file provided on the command line, and extracting LEN bytes
-// from 2/3rds of the way through the uncompressed output, writing that to
-// stdout. An offset can be provided as the second argument, in which case the
-// data is extracted from there instead.
-int main(int argc, char **argv) {
-    // Open the input file.
-    if (argc < 2 || argc > 3) {
-        fprintf(stderr, "usage: zran file.raw [offset]\n");
-        return 1;
-    }
-    FILE *in = fopen(argv[1], "rb");
-    if (in == NULL) {
-        fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
-        return 1;
-    }
-
-    // Get optional offset.
-    off_t offset = -1;
-    if (argc == 3) {
-        char *end;
-        offset = strtoll(argv[2], &end, 10);
-        if (*end || offset < 0) {
-            fprintf(stderr, "zran: %s is not a valid offset\n", argv[2]);
-            return 1;
-        }
-    }
-
-    // Build index.
-    struct deflate_index *index = NULL;
-    int len = deflate_index_build(in, SPAN, &index);
-    if (len < 0) {
-        fclose(in);
-        switch (len) {
-        case Z_MEM_ERROR:
-            fprintf(stderr, "zran: out of memory\n");
-            break;
-        case Z_BUF_ERROR:
-            fprintf(stderr, "zran: %s ended prematurely\n", argv[1]);
-            break;
-        case Z_DATA_ERROR:
-            fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
-            break;
-        case Z_ERRNO:
-            fprintf(stderr, "zran: read error on %s\n", argv[1]);
-            break;
-        default:
-            fprintf(stderr, "zran: error %d while building index\n", len);
-        }
-        return 1;
-    }
-    fprintf(stderr, "zran: built index with %d access points\n", len);
-
-    // Use index by reading some bytes from an arbitrary offset.
-    unsigned char buf[LEN];
-    if (offset == -1)
-        offset = ((index->length + 1) << 1) / 3;
-    ptrdiff_t got = deflate_index_extract(in, index, offset, buf, LEN);
-    if (got < 0)
-        fprintf(stderr, "zran: extraction failed: %s error\n",
-                got == Z_MEM_ERROR ? "out of memory" : "input corrupted");
-    else {
-        fwrite(buf, 1, got, stdout);
-        fprintf(stderr, "zran: extracted %ld bytes at %lld\n", got, offset);
-    }
-
-    // Clean up and exit.
-    deflate_index_free(index);
-    fclose(in);
-    return 0;
-}
-
-#endif

package/.cppjs/build/source/examples/zran.h

@@ -1,51 +0,0 @@
-/* zran.h -- example of deflated stream indexing and random access
- * Copyright (C) 2005, 2012, 2018, 2023 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- * Version 1.3  18 Feb 2023  Mark Adler */
-
-#include <stdio.h>
-#include "zlib.h"
-
-// Access point.
-typedef struct point {
-    off_t out;          // offset in uncompressed data
-    off_t in;           // offset in compressed file of first full byte
-    int bits;           // 0, or number of bits (1-7) from byte at in-1
-    unsigned char window[32768];    // preceding 32K of uncompressed data
-} point_t;
-
-// Access point list.
-struct deflate_index {
-    int have;           // number of access points in list
-    int mode;           // -15 for raw, 15 for zlib, or 31 for gzip
-    off_t length;       // total length of uncompressed data
-    point_t *list;      // allocated list of access points
-};
-
-// Make one pass through a zlib, gzip, or raw deflate compressed stream and
-// build an index, with access points about every span bytes of uncompressed
-// output. gzip files with multiple members are fully indexed. span should be
-// chosen to balance the speed of random access against the memory requirements
-// of the list, which is about 32K bytes per access point. The return value is
-// the number of access points on success (>= 1), Z_MEM_ERROR for out of
-// memory, Z_BUF_ERROR for a premature end of input, Z_DATA_ERROR for a format
-// or verification error in the input file, or Z_ERRNO for a file read error.
-// On success, *built points to the resulting index.
-int deflate_index_build(FILE *in, off_t span, struct deflate_index **built);
-
-// Use the index to read len bytes from offset into buf. Return the number of
-// bytes read or a negative error code. If data is requested past the end of
-// the uncompressed data, then deflate_index_extract() will return a value less
-// than len, indicating how much was actually read into buf. If given a valid
-// index, this function should not return an error unless the file was modified
-// somehow since the index was generated, given that deflate_index_build() had
-// validated all of the input. If nevertheless there is a failure, Z_BUF_ERROR
-// is returned if the compressed data ends prematurely, Z_DATA_ERROR if the
-// deflate compressed data is not valid, Z_MEM_ERROR if out of memory,
-// Z_STREAM_ERROR if the index is not valid, or Z_ERRNO if there is an error
-// reading or seeking on the input file.
-ptrdiff_t deflate_index_extract(FILE *in, struct deflate_index *index,
-                                off_t offset, unsigned char *buf, size_t len);
-
-// Deallocate an index built by deflate_index_build().
-void deflate_index_free(struct deflate_index *index);

package/.cppjs/build/source/gzclose.c

@@ -1,23 +0,0 @@
-/* gzclose.c -- zlib gzclose() function
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* gzclose() is in a separate file so that it is linked in only if it is used.
-   That way the other gzclose functions can be used instead to avoid linking in
-   unneeded compression or decompression routines. */
-int ZEXPORT gzclose(gzFile file) {
-#ifndef NO_GZCOMPRESS
-    gz_statep state;
-
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
-#else
-    return gzclose_r(file);
-#endif
-}