@cosyte/script-utils 0.0.2 → 0.1.0

package/CHANGELOG.md

@@ -2,12 +2,92 @@
 
 All notable changes to `@cosyte/script-utils` are documented here, following
 [Keep a Changelog](https://keepachangelog.com/en/1.1.0/). Versions are managed with Changesets;
-this file is hand-maintained (Changesets' own changelog generation is disabled). The package stays on
-the **`0.0.x`-until-first-alpha** ladder.
+this file is hand-maintained (Changesets' own changelog generation is disabled). The package is on the
+**`0.1.x`** line: its surface is settled, and bump types follow ordinary semver rather than a
+pre-alpha rule. See
+[ADR 0002](../../documentation/decisions/0002-the-0-1-0-version-line.md).
 
 > Because the generator is disabled, **`[Unreleased]` is promoted to a version heading BY HAND**, in
 > the pull request that adds the changeset. Nothing does it automatically.
 
+## [Unreleased]
+
+## [0.1.0] - Unreleased
+
+### Changed
+
+- **The package leaves the pre-alpha version ladder for the `0.1.x` line.** `isCliEntrypoint`
+  exports exactly what `0.0.2` exports. The phi-scan engine does NOT: see the entries below, which
+  are what this release actually carries on that subpath. The version policy itself is unchanged in
+  substance and the reasoning is in
+  [ADR 0002](../../documentation/decisions/0002-the-0-1-0-version-line.md). A consumer pinned at
+  `^0.0.2` does not resolve this release and has to widen its range once, which is recorded as break
+  candidate BC-2 in `documentation/release-0.1.0-audit.md`.
+- **`phi-scan`: `all` mode refuses unless EVERY scan root yielded a file that was read**, naming the
+  starved roots. The completeness rule asks whether every target was read; nothing asked whether a
+  root produced a target at all, and one productive root made the whole run look productive.
+  Measured before the change: a caller supplying an `isWalkReadable` that admits nothing read no
+  file on either sweeping route and printed `OK: no hits` at the CLEAN code over a tracked file
+  carrying a live dashed identifier.
+- **`phi-scan`: an UNTRACKED file removed mid-run is reported SKIPPED rather than refusing.** A
+  target the walk listed and that was gone by read time refused unconditionally, which made an
+  ordinary mid-run deletion look like an unaccounted-for file. Git carries no bytes at such a path,
+  so nothing the repository holds went unread. The exception is bounded: a tracked file, a
+  non-`ENOENT` failure, a path named on argv and a path that came BACK before the run ended all
+  still refuse.
+- **`phi-scan`: a finding names a position and stops there.** A hit report prints the locus, the
+  locator inside it and the rule that fired, and no longer the token that matched:
+  `segment=(ssn) (dashed SSN pattern)` where it used to carry the identifier as well. stderr is a CI
+  log, and a diagnostic ABOUT a PHI leak that quotes the leak is a second copy of it somewhere with
+  no retention policy. `Hit.value` is now optional, a hit the engine reports never carries one, and
+  **a gate test asserting that the matched identifier reaches stderr asserts on the locator and the
+  rule instead.**
+- **`phi-scan`: `all` mode reads the bytes git carries at EVERY tracked path.** `scanRoots` bounds
+  the WALK, which answers what is on disk under the roots you declared; the index answers what your
+  repository CARRIES, and a root list was narrowing that too. Measured on the first consumer to
+  adopt this engine: three real messages under an undeclared top-level directory were read by
+  neither route, and a tracked symbolic link outside every root was reached by neither. **A
+  repository whose roots are narrower than itself has more of it read after this release.** The two
+  READ filters are unchanged and still apply on both sweeping routes, so a tracked `.md` and an
+  `excludedPaths` entry mean what they meant. `--staged` is untouched.
+- **`phi-scan`: the `--staged` route refuses what `isStagedReadable` admits, and nothing else.** Its
+  non-regular and unmerged refusals used to fire for any path under a scan root, so a repository
+  whose staged scope is narrower than its roots had commits blocked that its own gate had always let
+  through: what a commit is blocked on is a hook decision each repository takes for itself. **This
+  refuses LESS at the pre-commit hook.** A staged entry your staged scope declines is still refused
+  by `all` mode on both of its routes, so your own sweep catches it; widen `isStagedReadable` if you
+  want the hook to refuse it too. Recorded with its compensating control as N1 in
+  [ADR 0003](../../documentation/decisions/0003-the-phi-scan-engine-gap-settlements.md).
+- **`phi-scan`: a hit in the bytes git carries says WHICH kind it is.** The single
+  `(as git carries it)` label becomes `(git index)` for a path whose working-tree copy the run never
+  read and `(git index; the working tree differs)` for one whose disk copy carries other bytes, with
+  a footer counting how many reported hits are in those bytes. The second kind reads clean in the
+  file a developer opens, so re-staging is part of its remedy and one label hid that. **A gate test
+  asserting the old label asserts one of the two new ones.**
+- **`phi-scan`: an index-route refusal no longer discards the hits already in hand.** An unmerged
+  index entry or a tracked link refused the whole sweep before anything was read, so a consumer saw
+  a refusal with no indication that PHI had already been found. The walk sweeps first, prints what
+  it found, and the refusal follows at the same code.
+- **`phi-scan`: a clean run that skipped a file says so on stdout**, as
+  `OK: no hits (N untracked file(s) skipped, see stderr)`. With nothing skipped the line is
+  byte-identical to what it was.
+- **`phi-scan`: a scan root has one settled outcome per KIND.** A regular file is scanned as one
+  target, a symbolic link is refused rather than followed, and a directory that cannot be listed is
+  refused at your `refuse` code naming the path: that one used to escape `readdirSync` uncaught and
+  take node's own exit 1, the code this contract reserves for HITS FOUND. The kind stays DERIVED
+  from the filesystem rather than declared, and what that gives up is recorded as N2 in ADR 0003.
+- **`phi-scan`: two refusals reworded because their remedies differ.** "git could not read this
+  repository's git index" and "the git index holds no entries" were one sentence. The starved-root
+  refusal says how many of how many roots went unobserved and names them.
+- **`phi-scan`: which tier refuses `--allow-fixture` follows the MODE.** A bypass beside a positional
+  path names something the run does not enumerate; a lone bypass declares a path an `all`-mode run
+  would have read and is refused by the completeness rule. Both name the path, and neither reaches a
+  clean run, which is unchanged.
+- The `README.md` in the tarball now opens its `## Status` section on the settled-line sentence
+  instead of the pre-alpha ladder one, so the policy text a consumer reads agrees with the version
+  printed beside it. `scripts/readme-check.mjs` grades that sentence against the release line the
+  pending changesets resolve to.
+
 ## [0.0.2] - 2026-08-11
 
 ### Added

package/README.md

@@ -1,10 +1,41 @@
+<a href="https://cosyte.com">
+  <picture>
+    <source media="(prefers-color-scheme: dark)" srcset="https://cosyte.com/tile/cosyte-lockup-tile-on-dark-1200x300.png">
+    <img alt="The Cosyte logo on its own white ground: the icon beside the word Cosyte." src="https://cosyte.com/tile/cosyte-lockup-tile-on-light-1200x300.png">
+  </picture>
+</a>
+
 # @cosyte/script-utils
 
-Zero-dependency helpers for the repo-local gate scripts every cosyte repo keeps in `scripts/`.
+> The two things every repo-local gate script gets wrong, fixed once and shared.
+
+[![npm version](https://img.shields.io/npm/v/@cosyte/script-utils.svg)](https://www.npmjs.com/package/@cosyte/script-utils)
+[![CI](https://img.shields.io/github/actions/workflow/status/cosyte/config/ci.yml?branch=main&label=CI)](https://github.com/cosyte/config/actions/workflows/ci.yml)
+[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://github.com/cosyte/config/blob/main/LICENSE)
+[![Node](https://img.shields.io/badge/node-%3E%3D22.14-brightgreen.svg)](https://nodejs.org)
+
+Zero-dependency helpers for the repo-local gate scripts in @cosyte/\* repos.
+
+## Why this exists
+
+A gate script that exits 0 without having checked anything is worse than no gate, because the run
+conclusion is the only thing anyone reads. Two ways of producing one turned out to be universal
+across the cosyte repositories: an entrypoint guard written by hand that answers `false` for ordinary
+invocations, and thirteen byte-distinct copies of one PHI scanner, each of which had to be fixed
+separately when an escape was found.
+
+The nearest alternative is `scripts/parser-template/`, and it is deliberately not this. A scaffold is
+COPIED, so fixing the template fixes no repository that already exists. Here a fix is one pull
+request and a version bump.
+
+## Status
 
-No runtime dependencies and no build step. Both are load-bearing for the gates in `config` itself,
-which run **before `pnpm install`** on purpose, so that a broken or hostile install cannot decide
-whether a release gate runs.
+`@cosyte/script-utils` is on the cosyte 0.1.x line: the public API is settled and bump types follow ordinary semver.
+
+Still moving: the `runPhiScan` option surface, which is where the per-repo axes below are still being
+argued about, and the cross-cutting detection floor, which gains patterns as escapes are found. A new
+pattern is a new red in a consumer that was passing, so pin an exact version if a green commit gate
+matters more to you than a new detection.
 
 ## Install
 
@@ -12,13 +43,17 @@ whether a release gate runs.
 pnpm add -D @cosyte/script-utils
 ```
 
+Node `>=22.14`. ESM only, no runtime dependencies, and no build step. Both of those are load-bearing
+rather than minimalism: the gates in `config` itself run **before `pnpm install`** on purpose, so
+that a broken or hostile install cannot decide whether a release gate runs.
+
 ### If your gate runs before `pnpm install`, do not use the bare specifier
 
 Read this before adopting the package, because it is the one thing that does not generalise.
 
 A bare `import ... from "@cosyte/script-utils"` resolves through `node_modules`, so it only works
-once the install has happened. `config`'s own two gates run before their install and therefore
-import this file by **relative path** instead, which needs nothing on disk but the checkout.
+once the install has happened. `config`'s own gates run before their install and therefore import
+this file by **relative path** instead, which needs nothing on disk but the checkout.
 
 So check when your gate runs, and pick accordingly:
 
@@ -29,26 +64,187 @@ So check when your gate runs, and pick accordingly:
 
 Installing the package does not, on its own, give a pre-install gate the property described above.
 
-## `isCliEntrypoint(import.meta.url)`
+Every entry point is published as source with no build step, so the relative-path route works for
+all three: the files are `index.js`, `phi-scan.js` and `internal-refs.js`, each beside its own
+hand-written `.d.ts`. A vendored copy is one of those files and nothing else.
 
-Is this module the file Node was pointed at, rather than one imported by something else?
+## Usage
 
-```js
+Guard a script's CLI side effect so a test can import it for its exports. That guard wraps the exit,
+so this is the whole shape of a real gate:
+
+```ts runnable
 import { isCliEntrypoint } from "@cosyte/script-utils";
 
-export function main(argv) {
-  /* ... */
+/** Your gate's body, exported so a test can import it without the CLI running. */
+export function main(argv: string[]): number {
+  return argv.length;
 }
 
-if (isCliEntrypoint(import.meta.url)) {
-  process.exit(main(process.argv.slice(2)));
-}
+// This module was imported, not pointed at, so the guard is closed: `main` does not run and nothing
+// exits. The assertion is deliberately ahead of the branch, so the example cannot exit a test
+// process even if that answer ever changed.
+const runAsCli = isCliEntrypoint(import.meta.url);
+runAsCli; // => false
+if (runAsCli) process.exit(main(process.argv.slice(2)));
 ```
 
 That guard is what lets a test import the module for its exports without the CLI executing as a side
 effect, while the script still runs normally when invoked.
 
-### Why not compare the strings
+The PHI scanner is the other half, on its own subpath. Its shared read filter is exported so a
+caller can compose with it rather than restate it:
+
+```ts runnable
+import { exemptsMarkdown } from "@cosyte/script-utils/phi-scan";
+
+exemptsMarkdown("docs/adopting.md"); // => false
+exemptsMarkdown("src/patient.ts"); // => true
+```
+
+The internal-reference gate is the third, and it is configured entirely through one object. The
+axis names below are the whole interface a consumer needs, so they are checked here rather than
+described:
+
+```ts runnable
+import { canonicalRuleNames, resolveConfig } from "@cosyte/script-utils/internal-refs";
+
+const config = {
+  projectPrefixes: ["HL7", "CCDA"],
+  standardsDesignations: ["HL7-(?:V2|V3|CDA)"],
+  surfacePaths: ["README.md", "docs-content"],
+  accountedTarballFiles: ["CHANGELOG.md", "dist"],
+};
+
+// Hand that to `runInternalRefsScan(config)` and it returns an exit code. Checked here without
+// touching a repository, so this example reds if an axis is ever renamed under a consumer.
+resolveConfig(config).problems; // => undefined
+canonicalRuleNames().length; // => 6
+```
+
+The `attw` publish gate is the fourth. It exists because `attw` prints "This package does not
+contain types." and exits **0**: for a package that ships types, that sentence means the
+declarations were not in the tarball, which is a broken publish reported as a pass. Your repo keeps
+`scripts/attw.mjs` and an `attw` script whose body is exactly `node scripts/attw.mjs`; that file is
+a caller, and this is the whole of it:
+
+```ts runnable
+import { runAttwGate } from "@cosyte/script-utils/attw";
+
+// The one line a consuming repo's `scripts/attw.mjs` carries:
+//
+//     process.exitCode = runAttwGate({ callerUrl: import.meta.url });
+//
+// `callerUrl` is required and has no default. `attw` is resolved as `../node_modules/.bin/attw`
+// from it, so the binary that runs is YOUR package's own; defaulted to this module's location it
+// would resolve inside `node_modules/@cosyte/`, where your package has no attw at all. The gate
+// RETURNS the code to exit with and never calls `process.exit`, so it is testable in-process.
+typeof runAttwGate; // => "function"
+```
+
+## Entry points
+
+| entry point                          | what it is                                                               |
+| ------------------------------------ | ------------------------------------------------------------------------ |
+| `@cosyte/script-utils`               | `isCliEntrypoint(moduleUrl)`, the entry-point guard                      |
+| `@cosyte/script-utils/phi-scan`      | `runPhiScan(config)` and `exemptsMarkdown(relPath)`, the shared PHI gate |
+| `@cosyte/script-utils/internal-refs` | `runInternalRefsScan(config)`, the shared internal-reference gate        |
+| `@cosyte/script-utils/attw`          | `runAttwGate(options)`, the shared `attw` publish gate                   |
+
+They are separate subpaths because they are separately adoptable: a repo can take the entry-point
+guard without taking a position on PHI scanning, a repo can take the internal-reference gate without
+taking either, and importing one never loads another.
+
+### The em-dash gate, which is a file rather than a subpath
+
+This package also ships `check-no-emdash.sh`, the one implementation of the em-dash gate for every
+`@cosyte/*` repository. It is a shell script and not a module, so it is not in the `exports` map:
+nothing imports it, a repository EXECUTES it.
+
+```sh
+# The package script every consuming repo keeps, which forwards its arguments:
+#   "check:no-emdash": "bash node_modules/@cosyte/script-utils/check-no-emdash.sh"
+bash node_modules/@cosyte/script-utils/check-no-emdash.sh              # scan every tracked file
+bash node_modules/@cosyte/script-utils/check-no-emdash.sh --stdin PR   # scan text on stdin
+bash node_modules/@cosyte/script-utils/check-no-emdash.sh --list-scanned
+bash node_modules/@cosyte/script-utils/check-no-emdash.sh --self-id
+```
+
+Exit 0 means the mode completed and found nothing banned. Exit 1 means anything else: a banned form
+was found, an input could not be read, an input was not scanned, a declaration was unusable, or an
+argument was not recognised. There is no third code. Hits and diagnostics go to stderr in every mode.
+
+`--self-id` prints the sha256 of the copy that is executing, so a repository can prove it is running
+these bytes rather than a fork of them. `--list-scanned` prints the NUL-separated, repo-root-relative
+path of every tracked file the default scan reads, so a repository adopting the gate can compare its
+coverage against whatever it ran before rather than compare two filter expressions.
+
+A repository narrows WHAT IS SCANNED, and only that, through a tracked file at its own top level,
+`scripts/check-no-emdash.exclude`: one entry per line, `#` comments and blank lines ignored, an entry
+ending in `/` covering every tracked path beneath it, and every entry anchored at the repository
+root. An entry that matches no tracked path is refused rather than ignored, because an exclusion that
+has outlived its subject is a hole nobody is looking at. Nothing narrows WHAT IS MATCHED: the six
+banned forms are fixed in the gate.
+
+## Overrides
+
+`isCliEntrypoint` has no options and cannot be overridden. It answers one question and its
+tie-breaking direction is the whole design, so a knob to invert it would be a knob to turn the gate
+off.
+
+`runPhiScan` is configured entirely through its `config` argument, along the five axes tabulated
+under [the five per-repo axes](#the-five-per-repo-axes) below: three are required because they are
+the ones a port gets wrong, and the defaulted ones move for every repo at once through a version
+bump.
+
+The engine's own cross-cutting detection floor is not on that list, and it is not overridable.
+Neither is the completeness rule that refuses a run which enumerated a target and never read it. A
+caller can widen what is scanned and can add detection, and cannot subtract either of those two.
+
+`runInternalRefsScan` follows the same bargain along [its own axes](#the-internal-reference-axes):
+four required, six defaulted, and every per-repository difference supplied by the caller. What it
+will not accept is a configuration that SUBTRACTS. The canonical rule set, the self-test floor and
+every completeness refusal are not caller inputs, and an option that reaches for one of them is
+refused by name rather than ignored. So is an option the gate has never heard of: an ignored setting
+reads, from the caller's side, exactly like an honoured one.
+
+`runAttwGate` takes the narrowest bargain of the four, and deliberately. A caller supplies where it
+lives (`callerUrl`, required, no default) and may supply the arguments to forward; everything else
+is the gate's. The arguments it will forward are an ALLOW-LIST of two (`--profile` with its value,
+and `--no-definitely-typed`), because a deny-list of blinding spellings bought exactly one more
+evasion per round: each of `--quiet`, `-q`, `--format json`, `-fjson`, `-qP`, `--config-path`,
+`--help` and `--version` was measured making attw exit 0 with nothing for the gate to read.
+Widening that set is a deliberate one-line edit in this package, reviewed here, and not something a
+caller can do. No net can be switched off.
+
+## PHI and safety
+
+This package ships the machinery of the PHI commit-gate, so it is the one package here that reads
+files which may contain patient data. What it does with them, stated narrowly:
+
+- It reads your repository's own files, in your own process, to look for PHI-shaped content. It sends
+  nothing anywhere and opens no network connection.
+- It **does not log, echo or persist a matched value**. A finding names a path, a locator inside it
+  (`(ssn)`, `(email)`, or the field id your own detector raised it against) and the rule that fired;
+  the matched bytes are not written into the report, because a gate that prints the secret it found
+  has published it into a CI log. A `value` your detector passes to `ctx.hit` is dropped at the
+  boundary rather than stored, so nothing downstream can print what no record carries.
+- The allow-list and the override log record DECLARATIONS about paths, never content.
+- Detection is a floor, not a proof: this package owns a dashed SSN shape and an email at an
+  undeclared domain, and everything field-level is yours to supply through `detect`. A clean run
+  means nothing this configuration looked for was found, which is not the same as no PHI.
+
+The consumer still owns the rest: deciding what a PHI-bearing field is for its standard, keeping real
+patient data out of the repository in the first place, and never illustrating a rule, a fixture or an
+issue report with a real value.
+
+## API
+
+### `isCliEntrypoint(import.meta.url)`
+
+Is this module the file Node was pointed at, rather than one imported by something else?
+
+#### Why not compare the strings
 
 The obvious spelling is a one-liner, and several cosyte repos wrote it by hand:
 
@@ -72,7 +268,7 @@ the defect the gate was written to catch, because the run conclusion is the only
 `isCliEntrypoint` compares canonical paths, resolves symlinks, and treats an `argv[1]` that names no
 file on disk as a specifier Node had to resolve.
 
-### Which way it errs
+#### Which way it errs
 
 When the answer is genuinely ambiguous it returns `true` and the CLI runs. A false positive runs a
 gate during an import, which is loud and immediately visible; a false negative skips a gate and
@@ -81,7 +277,7 @@ exits 0, which is silent. Those are not symmetric, so the tie goes to running.
 It throws a `TypeError` rather than returning `false` when handed something that is not a non-empty
 string, for the same reason.
 
-## `runPhiScan(config)`
+### `runPhiScan(config)`
 
 `@cosyte/script-utils/phi-scan` is the shared machinery of the `@cosyte/*` PHI commit-gate.
 
@@ -103,7 +299,7 @@ process.exit(
 
 It returns an exit code rather than calling `process.exit`, so a test can drive it in process.
 
-### Why it is a dependency and not a template file
+#### Why it is a dependency and not a template file
 
 `scripts/parser-template/` is a **scaffold**, not a dependency: the scaffolder copies it, so fixing
 the template fixes no existing repo. That produced thirteen byte-distinct copies of one scanner, and
@@ -111,19 +307,29 @@ a newly-found escape therefore cost one pull request and one adversarial review
 escape classes were paid for that way before this package existed. Here it is one pull request and a
 version bump.
 
-### What it owns
+#### The boundary: what the engine owns, and what stays in your repo
+
+**The ENGINE, shared and shipped here.** Argument parsing and the three modes (`--staged`, explicit
+paths, and the `all`-mode sweep); reading the allow-list and the override log; target enumeration;
+the union of the working-tree walk with the bytes git carries at every index path, deduplicated **by
+content** under git's own `blob <len>\0` framing; the completeness rule (a target the run enumerated
+and never read refuses, naming the paths); the per-root observation rule (`all` mode refuses unless
+every `scanRoots` entry yielded a file that was read, naming the starved roots); every refusal; and a
+cross-cutting detection floor that finds a dashed SSN shape and an email at an undeclared domain over
+every file, always.
 
-Argument parsing and the three modes (`--staged`, explicit paths, and the `all`-mode sweep); the
-allow-list and the override log; target enumeration; the union of the working-tree walk with the
-bytes git carries, deduplicated **by content** under git's own `blob <len>\0` framing; the
-completeness rule (a target the run enumerated and never read refuses, naming the paths); every
-refusal; and a cross-cutting floor that detects a dashed SSN shape and an email at an undeclared
-domain.
+**The RULES, local to your repo, never moved and never shipped in this package.**
+`scripts/phi-allow-list.txt` (the positive declaration that a token is synthetic, tagged `NAME`,
+`DOB`, `ADDR`, `ID`, `EMAILDOMAIN`); `phi-scan-overrides.md` (the `--allow-fixture` audit log, and
+whatever category-to-field map your detector reads); and the per-standard field detector you supply
+through `detect` (names, DOB, MRN / member id, address, phone, parsed out of your own wire format).
 
-It does **not** own per-standard field detection: names, DOB, MRN / member id, address, phone.
-Those differ per healthcare standard and are supplied through `detect`.
+The split is not a convenience. **This package's `files` list ships no repo's rules**, so a
+declaration one consumer makes can never travel to another consumer through a version bump: with no
+file at `allowListPath` the engine treats every PHI-shaped token as undeclared, and refuses rather
+than reporting clean. A rules file is a reviewed, committed act in the repository it describes.
 
-### The five per-repo axes
+#### The five per-repo axes
 
 Which ones are required is the design, not an oversight.
 
@@ -141,7 +347,7 @@ across a repo boundary is how a caller ends up branching on a meaning that repo
 A defaulted axis is the opposite case: every repo wants the same answer, so the answer lives here
 and reaches all of them through a version bump.
 
-### Two things worth knowing before you adopt
+#### Two things worth knowing before you adopt
 
 **A detector that consults nothing has no remedy.** The whole-file `--allow-fixture` bypass is
 recorded and then refused, so it cannot reach a clean run. Check every PHI-bearing field against
@@ -152,6 +358,135 @@ this on both branches.
 because without it the sweep is the working-tree walk's word alone. A freshly scaffolded repo has to
 `git init` and commit before an `all`-mode run means anything.
 
+**Every scan root has to produce something.** `all` mode refuses when a `scanRoots` entry yielded no
+file that was read, and names it. A root that is missing, unreadable, or whose every file your read
+filter drops used to leave the sweep quietly narrower than its own configuration said, and one
+productive root made the whole run look productive. If you narrow `scanRoots`, this is the tier that
+tells you what the narrowing stopped reading. A root naming a regular file is scanned as one target;
+one naming a symbolic link is refused rather than followed; one naming a directory that cannot be
+listed is refused, naming the path.
+
+**`scanRoots` bounds the WALK, not the index.** `all` mode reads the bytes git carries at every
+tracked path, whatever your roots say, because a root list answers what is on disk under it and the
+index answers what your repository carries. A hit found there is labelled `(git index)` or
+`(git index; the working tree differs)`, with a footer counting them: the second means the file on
+disk reads clean, so re-staging is part of the remedy.
+
+**`isStagedReadable` decides what `--staged` REFUSES, not only what it reads.** A staged entry that
+is not a regular blob, or that has no stage-0 blob, is refused when this predicate admits it and left
+alone when it does not, because what a commit is blocked on is your repository's decision. `all` mode
+still refuses such an entry on both of its routes.
+
+### `runInternalRefsScan(config)`
+
+`@cosyte/script-utils/internal-refs` keeps our own bookkeeping off every surface a consumer reads:
+item identifiers, phase and wave language, ADR numbers, internal repository paths and traceability
+markers, on the pages, the npm metadata and, optionally, the doc comments that compile into shipped
+type declarations.
+
+```ts
+import { runInternalRefsScan } from "@cosyte/script-utils/internal-refs";
+
+process.exit(
+  runInternalRefsScan({
+    projectPrefixes: ["HL7", "CCDA", "MLLP"],
+    standardsDesignations: ["HL7-(?:V2|V3|CDA)", "FHIR-R\\d[A-Z]?"],
+    surfacePaths: ["README.md", "TRADEMARKS.md", "LICENSE", "docs-content"],
+    accountedTarballFiles: ["CHANGELOG.md", "dist"],
+    sourceDocComments: { enabled: true, paths: ["src/*.ts", "src/**/*.ts"] },
+  }),
+);
+```
+
+It returns an exit code rather than calling `process.exit`, so a test can drive it in process.
+
+#### What exit 0 means, and what it does not
+
+Exit 0 means the run completed, enumerated its configured surface, read every target it enumerated,
+passed its own self-tests and found nothing. A hit, an enumerated target that was never read, an
+unreadable input, an input a text matcher classifies as binary, a configured surface path the
+repository does not track, a `files` entry the configuration does not account for, and a failed
+self-test are each a non-zero exit with the cause on stderr. A hit report names the file, the line
+and the rule.
+
+#### The internal-reference axes
+
+Four are required, and which four is the design rather than an oversight: each is the axis a port
+gets wrong, and a default would be one repository's answer imposed on every other.
+
+| Axis                       | Option                  | Required?                                                             |
+| -------------------------- | ----------------------- | --------------------------------------------------------------------- |
+| 1 Project prefixes         | `projectPrefixes`       | **Required**, empty refused. Keying on these is why `MSH-2` survives. |
+| 2 Standards designations   | `standardsDesignations` | **Required.** Never flagged. An empty list declares no collisions.    |
+| 3 Public surface           | `surfacePaths`          | **Required**, empty refused, every entry must be tracked.             |
+| 4 Tarball accounting       | `accountedTarballFiles` | **Required.** The `files` entries already accounted for.              |
+| 5 Source doc comments      | `sourceDocComments`     | Defaulted OFF. Enable where the build copies doc text verbatim.       |
+| 6 Exit codes               | `exitCodes`             | Defaulted `{ clean: 0, hits: 1, refuse: 1 }`. `clean` must stay 0.    |
+| 7 Added detection          | `extraRules`            | Defaulted `[]`. Each added rule brings its own samples.               |
+| 8 Added self-test material | `extraSamples`          | Defaulted `{}`. Additive only.                                        |
+| 9 Repository under test    | `repoRoot`              | Defaulted to the working directory, anchored at its git top level.    |
+| 10 Report destination      | `write`                 | Defaulted to the process streams.                                     |
+
+`CONFIG_AXES` is the same table as data, so a consumer can enumerate it rather than transcribe it.
+
+#### Two things worth knowing before you adopt this one
+
+**The prefix set has to be extended by hand, and that is the cheaper mistake.** A new programme
+means adding its prefix, and nothing catches it until someone does. The alternative is a `WORD-N`
+shape rule, which flags the segment-field references a parser's documentation exists to provide.
+
+**Every configured prefix has to be reachable.** The self-test floor proves each one still matches,
+so a prefix shadowed by a standards designation refuses the run instead of silently contributing
+nothing. That is the axis a caller edits most, and a dead entry there is a rule that stopped seeing.
+
+### `runAttwGate(options)`
+
+The `attw` publish gate, run in the working directory of the package being checked. It returns the
+exit code a caller should exit with: 0 when every net passed, attw's own status when attw itself
+judged the package, and 1 for every refusal.
+
+`attw --pack .` prints "This package does not contain types." and exits **0**, because
+`getExitCode()` returns before it reads the problem list whenever the analysis found no types at
+all. For a package that ships types, that is a broken publish reported as a pass, and the window it
+arrives through is ordinary: `tsup` emits JS in one pass and declarations in a later one, so every
+build has a moment where `dist/` holds `.mjs`/`.cjs` and no `.d.ts`.
+
+Four nets, each catching something the others cannot:
+
+1. **Preflight**, over every relative artifact path the manifest promises. A path that is missing or
+   empty reds and is named. A manifest that declares NOTHING is refused rather than reported as
+   checked: three of the four nets grade that one set, so an empty set makes them vacuous at once.
+2. **The document attw prints**, never its prose. The gate forces `--format json` and asserts
+   `analysis.types.kind === "included"`, so a route that hides or reformats the output leaves stdout
+   unparseable, and unparseable fails closed.
+3. **npm's own pack listing.** A declared path can be on disk and out of the tarball, which net 1
+   cannot see and which a committed `.attw.json` can hide from attw's exit code. This net asks npm.
+4. **The manifest pnpm WOULD PUBLISH.** pnpm applies `publishConfig` as publish-time overrides and
+   rewrites the manifest inside the tarball; `npm pack` does not. This org publishes with pnpm, so
+   the document net 3 grades is not the one that ships.
+
+What each net does and does not claim, and every measurement behind them, is in `attw.js`'s own
+docblock. It is not restated here: a claim written down twice is a claim that drifts.
+
+## Compatibility
+
+Node `>=22.14`, ESM only, published as source (`index.js`, `phi-scan.js`, `internal-refs.js` and
+`attw.js` with hand-written `.d.ts` files) with no build step, so a consumer can import it by
+relative path from a checkout as well as by specifier. `runPhiScan` shells out to `git` for the
+index-backed half of its sweep, so `all` mode needs git on the path, `runInternalRefsScan` shells
+out to `git` for its whole enumeration, and `runAttwGate` spawns the consuming package's own `attw`
+binary, `npm pack` and, where a `publishConfig` object is present, `pnpm pack`.
+
+## Contributing
+
+Questions, bug reports and proposals go to
+[the issue tracker](https://github.com/cosyte/config/issues). Pull requests are welcome, in
+[cosyte/config](https://github.com/cosyte/config), where this package lives.
+
+A change has to clear the required `verify` job, and a change to the scan engine needs a changeset:
+a new detection pattern reds a consumer that was passing, and a removed one silently stops catching
+something. Never open an issue containing a real PHI value; describe the shape instead.
+
 ## License
 
-MIT
+MIT, copyright Cosyte. See [LICENSE](https://github.com/cosyte/config/blob/main/LICENSE).

package/attw.d.ts

@@ -0,0 +1,36 @@
+/**
+ * Type declarations for `@cosyte/script-utils/attw`, the shared `attw` publish gate.
+ *
+ * The behaviour, every net, every refusal and every measurement behind them are documented in
+ * `attw.js`'s own docblock, which is the single authoritative description. Nothing is restated
+ * here: a claim written down twice is a claim that drifts.
+ */
+
+/** What a caller must tell the gate, and the one thing it may. */
+export interface AttwGateOptions {
+  /**
+   * The CALLER's `import.meta.url`. REQUIRED, and deliberately without a default.
+   *
+   * `attw` is resolved as `../node_modules/.bin/attw` from this URL, so the binary the gate spawns
+   * is the CONSUMING package's own. Defaulted to this module's URL it would resolve inside
+   * `node_modules/@cosyte/`, where a consumer has no attw at all. A call that omits it is refused.
+   */
+  callerUrl: string;
+  /**
+   * The arguments to grade against the allow-list and forward to attw. Defaults to this process's
+   * own (`process.argv.slice(2)`). Only `--profile` (with its value) and `--no-definitely-typed`
+   * are accepted; everything else is refused by the allow-list rather than forwarded.
+   */
+  argv?: string[];
+}
+
+/**
+ * Run the gate in the current working directory, which must be the package being checked.
+ *
+ * Nothing here calls `process.exit`: the code is RETURNED, and a caller is expected to set
+ * `process.exitCode` from it.
+ *
+ * @returns 0 when every net passed, attw's own status when attw itself judged the package, and 1
+ *   for every refusal the gate raises.
+ */
+export declare function runAttwGate(options: AttwGateOptions): number;