@corva/ui 0.38.0-6 → 0.38.0-7

package/src/utils/DrillstringUtils.md

@@ -1,134 +0,0 @@
-# BHA can consist of 11 component types.
-
-**NOTE:** All input values are converted to imperial before validation.
-
-`Drillstring/BHA number` - required.
-
-`Time In`- date, format: `MM/DD/YYYY HH:mm`
-
-`Hole Depth In`- start depth, required. Min depth - 0, max depth - 40000 ft.
-
-## DP
-
-`ID` - inner depth, from 1 to 7 in  
-`OD` - outer depth, from 2 to 8 in  
-`TJ ID` - tooljoint inner depth, from 1 to 7 in  
-`TJ OD` - tooljoint outer depth, from 2 to 10 in  
-`Component length` - from 0 ft
-
-## HWDP
-
-`ID` - inner depth, from 1 to 7 in  
-`OD` - outer depth, from 2 to 8 in  
-`TJ ID` - tooljoint inner depth, from 1 to 7 in  
-`TJ OD` - tooljoint outer depth, from 2 to 10 in  
-`Component length` - from 0 ft
-
-## DC
-
-`ID` - inner depth, from 0.5 to 7 in  
-`OD` - outer depth, from 2 to 13 in  
-`Component length` - from 0 ft
-
-## Stabilizer
-
-`ID` - inner depth, from 0 to 100 in  
-`OD` - outer depth, from 1 to 100 in  
-`Component length` - from 0 ft
-
-## PDM
-
-`ID` - inner depth, from 0 to 12 in  
-`OD` - outer depth, from 2 to 15 in  
-`Component length` - from 4 ft  
-`Off Bottom Pressure Loss`- flow rate and pressure loss fields are required
-
-### PDM Stabilizer
-
-PDM can include stabilizer.  
-`ID` - inner depth, from 0 to 100 in  
-`OD` - outer depth, from 1 to 100 in  
-`Component length` - from 0 ft  
-`OD` > `ID`  
-`OD + 0.1` < `Bit Size`
-
-`PDM Stabilizer linear weight` - required  
-`# of rotor lobes` - from 1 to 10  
-`# of stator lobes` - from 2 to 10  
-`revolution per gallon (volume metric)` - from 0 to 10
-
-#### PDM Standard Flow Range
-
-`Max Weight On Bit` - not required. If set, it should be from 0 to 200 `klbf`.
-
-`MIN standard flow rate` - from 0 to 2500 `gal/min`
-
-`MAX standard flow rate` - from 0 to 2500 `gal/min`
-
-`Max Operating Diff Pressure` - from 0 to 3000 `psi`
-
-`Torque at Max Operating Diff Pressure` - from 0 to 40 `ft-klbf`  
-`% Leakage Flow Loss` - from 0 to 20%
-
-## MWD
-
-`ID` - inner depth, from 0 to 12 in  
-`OD` - outer depth, from 2 to 13 in  
-`Component length` - from 1 ft
-
-### MWD Gamma Sensor
-
-One of MWD components can have gamma sensor.
-
-`Gamma Sensor To Bit Distance` - required
-
-### MWD Survey Sensor
-
-MWD component can have survey sensor
-
-`Survey Sensor To Bit Distance` - from 0 to 150 length units
-
-## Agitator
-
-`ID` - inner depth, from 0 to 12 in  
-`OD` - outer depth, from 2 to 13 in  
-`Component length` - from 1 ft
-
-## RSS
-
-`ID` - inner depth, from 0 to 12 in  
-`OD` - outer depth, from 2 to 13 in  
-`Component length` - from 1 ft  
-`Actuator Flow Loss` - from 0 to 10 percent
-
-## Bit
-
-Bit size > 0 in
-
-BHA must have exactly 1 BIT component and it must be the first or the last BHA component).
-
-`ratio` is 1 length unit converted to inches (1 inch by default)  
-`0` <= `TFA` <= `20 * ratio ^2`
-
-## Other components except BIT
-
-`ID` - inner depth, from 0 to 100 in  
-`OD` - outer depth, from 1 to 100 in  
-`Component length` - from 0 ft
-
-## Common rules
-
-`ID` <= `OD`  
- `ToolJoint OD` >= `OD`
-
-`OD + 0.1` < `Bit Size`
-
-`Tool Joint Length` < `Component Length`
-
-`Pressure Loss`- flow rate and pressure loss are required.
-
-#### `Adjusted Linear Weight` for DP, HWDP, DC components
-
-`estimation` = `2.673 * ((OD * OD) - (ID * ID))`
-
-`estimation x 0.5` <= `adjusted linear weight` <= `estimation x 1.5`

package/src/utils/FluidCheckUtils.js

@@ -1,192 +0,0 @@
-import isNumber from 'lodash/isNumber';
-import get from 'lodash/get';
-import has from 'lodash/has';
-import set from 'lodash/set';
-
-import moment from 'moment';
-
-import { convertValue, getUnitPreference } from './convert';
-
-const DEFAULT_PRECISION = 5;
-
-export const isValueEmpty = val => val !== 0 && !val;
-
-export const isValueValid = (val, min, max, emptyAllowed) => {
-  if (isValueEmpty(val)) {
-    if (emptyAllowed) {
-      return true;
-    }
-    return false;
-  }
-  return isNumber(val) && val > min && val < max;
-};
-
-export const ctop = (val, unitType, fromUnit) => {
-  if (!isNumber(val)) {
-    return null;
-  }
-  return unitType && fromUnit ? convertValue(val, unitType, fromUnit) : parseFloat(val);
-};
-
-export const ctoi = (val, unitType, toUnit, precision = DEFAULT_PRECISION) => {
-  if (!isNumber(val)) {
-    return null;
-  }
-  return unitType && toUnit
-    ? convertValue(val, unitType, getUnitPreference(unitType), toUnit, precision)
-    : parseFloat(val);
-};
-
-export const convertToPrefUnit = (record, mudProperties = []) => {
-  const mudDensity = ctop(get(record, ['data', 'mud_density']), 'density', 'ppg');
-  const depth = ctop(get(record, ['data', 'depth']), 'length', 'ft');
-  const tvd = ctop(get(record, ['data', 'tvd']), 'length', 'ft');
-
-  let convertedRecord = {
-    ...record,
-    data: {
-      ...record.data,
-      mud_density: mudDensity,
-      depth,
-      tvd,
-    },
-  };
-
-  convertedRecord = mudProperties.reduce((result, mudProperty) => {
-    const path = ['data', ...mudProperty.key.split('.')];
-    if (!has(record, path)) return result;
-
-    const convertedProperty = ctop(get(record, path), mudProperty.unitType, mudProperty.unit);
-
-    return set(result, path, convertedProperty);
-  }, convertedRecord);
-
-  return convertedRecord;
-};
-
-export const convertToImperialUnit = (record, mudProperties = []) => {
-  let newRecord = record;
-  const dateStr = get(record, ['data', 'date_str']);
-  if (dateStr) {
-    const objDate = moment(new Date(dateStr));
-    if (objDate.isValid()) {
-      newRecord = set(newRecord, ['data', 'date'], objDate.unix());
-    }
-  }
-
-  const mudDensity = ctoi(get(record, ['data', 'mud_density']), 'density', 'ppg');
-  const depth = ctoi(get(record, ['data', 'depth']), 'length', 'ft');
-  const tvd = ctoi(get(record, ['data', 'tvd']), 'length', 'ft');
-
-  let convertedRecord = {
-    ...newRecord,
-    data: {
-      ...newRecord.data,
-      mud_density: mudDensity,
-      depth,
-      tvd,
-      date_str: null,
-    },
-  };
-
-  convertedRecord = mudProperties.reduce((result, mudProperty) => {
-    const path = ['data', ...mudProperty.key.split('.')];
-    if (!has(record, path)) return result;
-
-    const convertedProperty = ctoi(get(record, path), mudProperty.unitType, mudProperty.unit);
-
-    return set(result, path, convertedProperty);
-  }, convertedRecord);
-
-  return convertedRecord;
-};
-
-export const validate = record => {
-  const {
-    date_str: dateStr,
-    mud_density: mudDensity,
-    viscosity: { pv, yp, rpm_readings: rpmReadings },
-  } = record.data;
-
-  let hasErrors = false;
-  const errors = {
-    viscosity: {
-      rpm_readings: [],
-    },
-  };
-
-  if (dateStr && !moment(new Date(dateStr)).isValid()) {
-    hasErrors = true;
-    errors.date = 'Invalid Date.';
-  }
-
-  const lowerMudDensity = ctop(5, 'density', 'ppg');
-  const upperMudDensity = ctop(20, 'density', 'ppg');
-  if (!isValueValid(mudDensity, lowerMudDensity, upperMudDensity, false)) {
-    hasErrors = true;
-    errors.mud_density = `It should be ${lowerMudDensity} ~ ${upperMudDensity}`;
-  }
-
-  if ((isValueEmpty(pv) || isValueEmpty(yp)) && rpmReadings.length < 2) {
-    hasErrors = true;
-    errors.viscosity.rpm_readings_required = 'At least 2 paris of rpm and dial_reading required.';
-  }
-
-  if (!isValueValid(pv, 0, 200, !errors.viscosity.rpm_readings_required)) {
-    hasErrors = true;
-    errors['viscosity.pv'] = 'It should be 0~200';
-  }
-
-  if (!isValueValid(yp, 0, 200, !errors.viscosity.rpm_readings_required)) {
-    hasErrors = true;
-    errors['viscosity.yp'] = 'It should be 0~200';
-  }
-
-  const existingRPMs = [];
-  for (let i = 0; i < rpmReadings.length; i += 1) {
-    errors.viscosity.rpm_readings[i] = {};
-    const rpmReadingsError = errors.viscosity.rpm_readings[i];
-    if (!isValueValid(rpmReadings[i].rpm, 0, 1000)) {
-      hasErrors = true;
-      rpmReadingsError.rpm = 'It should be 0~1000';
-    }
-    if (!isValueValid(rpmReadings[i].dial_reading, 0, 300)) {
-      hasErrors = true;
-      rpmReadingsError.dial_reading = 'It should be 0~300';
-    }
-
-    // Note: Validation for duplicated RPMs
-    if (existingRPMs.indexOf(rpmReadings[i].rpm) !== -1) {
-      hasErrors = true;
-      rpmReadingsError.rpm = 'Duplicated RPM value';
-    }
-
-    existingRPMs.push(rpmReadings[i].rpm);
-
-    // NOTE: Saving index for next validation for Dial Readings order
-    rpmReadings[i].originalIndex = i;
-  }
-
-  // NOTE: Validation to make sure that Dial Readings validation in order. Steps:
-  // 1) sort the pairs by RPM in ascending order;
-  // 2) check if the Dial Readings are in increasing order as well it is valid;
-  // 3) if previous Dial Reading is equal to the current one, it is still fine
-
-  const sortedReadingsByRpm = rpmReadings.sort((a, b) => a.rpm - b.rpm);
-  sortedReadingsByRpm.forEach((reading, i) => {
-    const rpmReadingsError = errors.viscosity.rpm_readings[reading.originalIndex];
-
-    if (
-      sortedReadingsByRpm[i - 1] &&
-      reading.dial_reading < sortedReadingsByRpm[i - 1].dial_reading
-    ) {
-      hasErrors = true;
-      rpmReadingsError.dial_reading = 'Dial Readings should be in increasing order';
-    }
-  });
-
-  return {
-    hasErrors,
-    errors,
-  };
-};

package/src/utils/HeatmapUtils.js

@@ -1,265 +0,0 @@
-// import { isNumber } from 'lodash';
-// import { Map, List } from 'immutable';
-
-// import { convertValue, getUnitDisplay } from '~/utils/convert';
-// import { getSubData } from '~/selectors/subscriptions';
-
-// const OPT_SUBSCRIPTION = {
-//   provider: 'corva',
-//   collection: 'drilling-efficiency.optimization',
-// };
-
-// const DEFAULT_DRM_VALUE = ['-', '-', '-'];
-// const DEFAULT_HEATMAP_VALUE = ['-', '-', '-'];
-
-// class HeatmapUtils {
-//   constructor({ data }, zParam, yParam) {
-//     this.data = data;
-//     this.zParam = zParam;
-//     this.isYWob = yParam === 'wob';
-//   }
-
-//   toRangeStringWithRounding = (num1, num2, defaultStr = null) => {
-//     const fNum1 = (isNumber(num1)) ? num1.toFixed(0) : defaultStr;
-//     const fNum2 = (isNumber(num2)) ? num2.toFixed(0) : defaultStr;
-//     let rangeString = '';
-//     if (fNum1 && fNum2) {
-//       rangeString = `${fNum1} - ${fNum2}`;
-//     } else if (fNum1) {
-//       rangeString = fNum1;
-//     } else if (fNum2) {
-//       rangeString = fNum2;
-//     }
-//     return rangeString;
-//   }
-
-//   formatNumber(num, format = '0,00', defaultStr = '') {
-//     return isNumber(num) ? num.formatNumeral(format) : defaultStr;
-//   }
-
-//   convertToPref = (formation) => {
-//     const wobFrom = convertValue(formation.getIn(['from', 'wob']), 'force', 'klbf');
-//     const wobTo = convertValue(formation.getIn(['to', 'wob']), 'force', 'klbf');
-//     const wobRange = this.toRangeStringWithRounding(wobFrom, wobTo);
-
-//     const rpmFrom = formation.getIn(['from', 'rpm']);
-//     const rpmTo = formation.getIn(['to', 'rpm']);
-//     const rpmRange = this.toRangeStringWithRounding(rpmFrom, rpmTo);
-
-//     const mse = formation.get('mse')
-//       ? convertValue(formation.get('mse'), 'msePressure', 'psi')
-//       : '';
-
-//     // NOTE: diff press doesn't have min, max range. It's single number
-//     const diffPress = convertValue(formation.get('diff_press'), 'pressure', 'psi');
-//     const dfFrom = diffPress * 0.9;
-//     const dfTo = diffPress * 1.1;
-//     const dfRange = this.toRangeStringWithRounding(dfFrom, dfTo);
-
-//     const oRop = formation.get('rop');
-//     const rop = isNumber(oRop) ? convertValue(oRop, 'velocity', 'ft/h') : oRop;
-
-//     return {
-//       id: formation.get('id'),
-//       assetId: formation.get('asset_id'),
-//       formationName: formation.get('formation_name'),
-//       warning: formation.get('warning'),
-//       wobFrom,
-//       wobTo,
-//       wobRange,
-//       rpmFrom,
-//       rpmTo,
-//       rpmRange,
-//       mse,
-//       diffPress,
-//       dfRange,
-//       rop,
-//     };
-//   }
-
-//   optSubscription = () => getSubData(this.data, OPT_SUBSCRIPTION).get('data', Map())
-
-//   heatmapData = () => {
-//     let sectionData = Map();
-
-//     if (this.isYWob) {
-//       sectionData = this.zParam === 'rop'
-//         ? this.optSubscription().get('recommended_rotary', Map())
-//         : this.optSubscription().get('recommended_mse', Map());
-//     } else {
-//       sectionData = this.zParam === 'rop'
-//         ? this.optSubscription().get('recommended_rop_diff_axis', Map())
-//         : this.optSubscription().get('recommended_mse_diff_axis', Map());
-//     }
-
-//     if (sectionData.isEmpty()) return DEFAULT_HEATMAP_VALUE;
-
-//     const minWobOrDiffPress = this.isYWob
-//       ? convertValue(sectionData.get('min_weight_on_bit'), 'force', 'klbf')
-//       : convertValue(sectionData.get('min_diff_press', 'pressure', 'psi'));
-//     const maxWobOrDiffPress = this.isYWob
-//       ? convertValue(sectionData.get('max_weight_on_bit'), 'force', 'klbf')
-//       : convertValue(sectionData.get('max_diff_press', 'pressure', 'psi'));
-
-//     const minRpm = sectionData.get('min_rpm');
-//     const maxRpm = sectionData.get('max_rpm');
-
-//     const optRop = this.zParam === 'rop'
-//       ? convertValue(sectionData.get('expected_rop'), 'velocity', 'ft/h')
-//       : convertValue(sectionData.get('optimized_mse'), 'msePressure', 'psi');
-
-//     return [
-//       this.toRangeStringWithRounding(minWobOrDiffPress, maxWobOrDiffPress),
-//       this.toRangeStringWithRounding(minRpm, maxRpm),
-//       this.formatNumber(optRop),
-//     ];
-//   }
-
-//   drmRecommendation = (formations, formationName) => {
-//     if (formations.isEmpty()) return DEFAULT_DRM_VALUE;
-
-//     const formationData = formations.find(item => item.get('formation_name') === formationName) || Map();
-
-//     if (formationData.isEmpty()) return DEFAULT_DRM_VALUE;
-
-//     const convertedFormationData = this.convertToPref(formationData);
-
-//     return [
-//       this.isYWob ? convertedFormationData.wobRange : convertedFormationData.dfRange,
-//       convertedFormationData.rpmRange,
-//       this.formatNumber(convertedFormationData[this.zParam]),
-//     ];
-//   }
-
-//   static getMinMaxFromRangeString(value) {
-//     const splitedValue = String(value).split('-');
-//     return splitedValue.length < 2
-//       ? [0, 0]
-//       : splitedValue;
-//   }
-
-//   getTableHeight = (heatmapSetting, drmSetting) => {
-//     const isToShowHeatmap = heatmapSetting.get('showHeatmap');
-//     const isToShowDRM = drmSetting.get('showDRM');
-
-//     let tableHeight = 0;
-//     if (isToShowHeatmap || isToShowDRM) {
-//       tableHeight = 105;
-//       if (isToShowHeatmap && isToShowDRM) {
-//         tableHeight = 140;
-//       }
-//     }
-
-//     return tableHeight;
-//   }
-
-//   getChartStyles = (props, xAxis, yAxis, drmData) => {
-//     const {
-//       heatmapRecommendationSetting: heatmapSetting,
-//       drmRecommendationSetting: drmSetting,
-//     } = props;
-
-//     const heatmapData = this.heatmapData();
-//     const [minWobOfHeatmap, maxWobOfHeatmap] = HeatmapUtils.getMinMaxFromRangeString(heatmapData[0]);
-//     const [minRpmOfHeatmap, maxRpmOfHeatmap] = HeatmapUtils.getMinMaxFromRangeString(heatmapData[1]);
-//     const [minWobOfDRM, maxWobOfDRM] = HeatmapUtils.getMinMaxFromRangeString(drmData[0]);
-//     const [minRpmOfDRM, maxRpmOfDRM] = HeatmapUtils.getMinMaxFromRangeString(drmData[1]);
-
-//     const unitX = 100 / List(xAxis.categories).maxBy();
-//     const unitY = 100 / List(yAxis.categories).maxBy();
-
-//     const left = [
-//       minRpmOfHeatmap * unitX,
-//       minRpmOfDRM * unitX,
-//     ];
-//     const bottom = [
-//       minWobOfHeatmap * unitY,
-//       minWobOfDRM * unitY,
-//     ];
-//     const width = [
-//       (maxRpmOfHeatmap - minRpmOfHeatmap) * unitX,
-//       (maxRpmOfDRM - minRpmOfDRM) * unitX,
-//     ];
-//     const height = [
-//       (maxWobOfHeatmap - minWobOfHeatmap) * unitY,
-//       (maxWobOfDRM - minWobOfDRM) * unitY,
-//     ];
-//     const borderColor = [
-//       heatmapSetting.get('color', '#FF6ECE'),
-//       drmSetting.get('color', '#38BBE9'),
-//     ];
-
-//     const showSetting = [
-//       heatmapSetting.get('showHeatmap'),
-//       drmSetting.get('showDRM'),
-//     ];
-//     const displaySetting = showSetting.map((showOrHide, i) =>
-//       showOrHide && (
-//         (left[i] > 0 && bottom[i] > 0 && width[i] > 0 && height[i] > 0) &&
-//         left[i] + width[i] < 100 &&
-//         bottom[i] + height[i] < 100
-//       ));
-
-//     return displaySetting.map((isToShow, i) => ({
-//       position: 'absolute',
-//       left: `${left[i]}%`,
-//       bottom: `${bottom[i]}%`,
-//       width: `${width[i]}%`,
-//       height: `${height[i]}%`,
-//       border: `2px dashed ${borderColor[i]}`,
-//       pointerEvents: 'none',
-//       display: isToShow ? 'block' : 'none',
-//     }));
-//   }
-
-//   getTableData = (actualData, formations, formationName, miniTableView, props) => {
-//     const {
-//       heatmapRecommendationSetting: heatmapSetting,
-//       drmRecommendationSetting: drmSetting,
-//     } = props;
-
-//     const drmData = this.drmRecommendation(formations, formationName);
-
-//     const tableTitles = [
-//       'Mode',
-//       this.isYWob ? `WOB, ${getUnitDisplay('force')}` : `Diff Press, ${getUnitDisplay('pressure')}`,
-//       'RPM',
-//       this.zParam === 'rop'
-//         ? `ROP, ${getUnitDisplay('velocity')}`
-//         : `MSE, ${getUnitDisplay('msePressure')}`,
-//     ];
-
-//     const heatmapCells = [miniTableView ? 'Heatmap' : 'Heatmap Recommendation', ...this.heatmapData()];
-//     const drmCells = [miniTableView ? 'Roadmap' : 'Roadmap Recommendation', ...drmData];
-
-//     const tableBody = [
-//       [heatmapSetting.get('showHeatmap'), heatmapCells],
-//       [drmSetting.get('showDRM'), drmCells],
-//     ].reduce((result, [isToShow, mapData]) => result.concat(isToShow ? [mapData] : []), [actualData]);
-
-//     return { tableTitles, tableBody };
-//   }
-
-//   getColorOfCircleIcon = (row, column, valueRange, actualData) => {
-//     if (row === 0) return 'transparent';
-
-//     const [min, max] = String(valueRange).split('-').map(str => Number(str));
-
-//     if (!min && !max) return 'transparent';
-
-//     const actualValue = Number(actualData[column]);
-//     const closedValue = Math.abs(min - actualValue) > Math.abs(max - actualValue)
-//       ? max
-//       : min;
-//     const deltaPercent = Math.abs((actualValue - closedValue) / actualValue) * 100;
-
-//     if (deltaPercent < 30 && deltaPercent >= 10) {
-//       return '#ffff00';
-//     } else if (deltaPercent < 10) {
-//       return '#00ff00';
-//     }
-//     return '#ff0000';
-//   };
-// }
-
-// export default HeatmapUtils;

package/src/utils/StageDesignVActualUtils.js

@@ -1,110 +0,0 @@
-import { convertValue } from '~/utils/convert';
-import {
-  FLUIDS_TYPES,
-  CHEMICALS_TYPES,
-  PROPPANTS_TYPES,
-  STAGE_ACTUAL_PARAM_COLORS,
-} from '~/constants/completion';
-
-const TEN_PERCENT = 10; // NOTE: 10 percent
-
-export const getAggreElems = (stageElems, summaryElems) =>
-  stageElems.reduce((agg, elem) => {
-    const { type } = elem;
-    const amount = elem.amount ? parseFloat(elem.amount) : 0;
-    const aggAmount = agg[type] ? agg[type].amount + amount : amount;
-    return {
-      ...agg,
-      [type]: {
-        amount: aggAmount,
-        unit_type: elem.unit_type,
-        unit: elem.unit,
-      },
-    };
-  }, summaryElems);
-
-export const getDifference = (designValue, actualValue) => {
-  if (!Number.isFinite(designValue) || !designValue) {
-    return '-';
-  }
-
-  if (!Number.isFinite(actualValue)) {
-    return 0;
-  }
-
-  return Math.round((actualValue / designValue) * 1000) / 10;
-};
-
-export const getElemActualColor = (category, elemKey) => {
-  let categoryTypes;
-  if (category === 'proppants') {
-    categoryTypes = PROPPANTS_TYPES;
-  } else if (category === 'fluids') {
-    categoryTypes = FLUIDS_TYPES;
-  } else if (category === 'volumeChemicals' || category === 'massChemicals') {
-    categoryTypes = CHEMICALS_TYPES;
-  }
-
-  if (categoryTypes) {
-    const targetElem = categoryTypes.find(elem => elem.name === elemKey);
-    return targetElem && targetElem.color;
-  }
-
-  return STAGE_ACTUAL_PARAM_COLORS[category];
-};
-
-export const getStageSummary = (summary, stage) => {
-  const stageData = stage.data || {};
-  const fluids = stageData.fluids || [];
-  const chemicals = stageData.chemicals || [];
-  const proppants = stageData.proppants || [];
-
-  const topPerforation = convertValue(
-    Math.min(stageData.top_perforation, summary.top_perforation),
-    'length',
-    'ft'
-  );
-  const bottomPerforation = convertValue(
-    Math.max(stageData.bottom_perforation, summary.bottom_perforation),
-    'length',
-    'ft'
-  );
-  const perforatedLength = convertValue(
-    summary.perforated_length + stageData.perforated_length,
-    'length',
-    'ft'
-  );
-  const flushVolume = convertValue(summary.flush_volume + stageData.flush_volume, 'oil', 'bbl');
-  const totalShots = summary.total_shots + stageData.total_shots;
-
-  return {
-    top_perforation: topPerforation,
-    bottom_perforation: bottomPerforation,
-    perforated_length: perforatedLength,
-    total_shots: totalShots,
-    flush_volume: flushVolume,
-    chemicals: getAggreElems(chemicals, summary.chemicals),
-    proppants: getAggreElems(proppants, summary.proppants),
-    fluids: getAggreElems(fluids, summary.fluids),
-  };
-};
-
-export const getFormattedValue = value => {
-  let formattedValue;
-  if (Number.isFinite(value)) {
-    formattedValue =
-      Math.floor(value) === value ? value.formatNumeral('0,0') : value.formatNumeral('0,0.0');
-  } else {
-    formattedValue = '';
-  }
-
-  return formattedValue;
-};
-
-export const getIsGreaterThanTenPercent = difference => {
-  if (!Number.isFinite(difference)) {
-    return true;
-  }
-
-  return Math.abs(difference - 100) >= TEN_PERCENT;
-};