@corva/convert-units 3.1.0

package/definitions/unitBucketMapping.json

@@ -0,0 +1,404 @@
+{
+  "Angle": [
+    "rad",
+    "deg",
+    "dega",
+    "degrees",
+    "grad",
+    "arcmin",
+    "arcsec"
+  ],
+  "Angle Per Length": [
+    "dpm",
+    "dp30m",
+    "dpf",
+    "dp100f",
+    "deg/100ft"
+  ],
+  "Angular Velocity": [
+    "1/s",
+    "Hz",
+    "rev/s",
+    "rps",
+    "rpm",
+    "RPM",
+    "rev/m",
+    "c/min",
+    "rph",
+    "rev/h",
+    "radsec",
+    "rad/s",
+    "rad/sec",
+    "dega/s",
+    "dega/m",
+    "dega/h"
+  ],
+  "Area": [
+    "mm2",
+    "cm2",
+    "m2",
+    "ha",
+    "km2",
+    "in2",
+    "yd2",
+    "ft2",
+    "ac",
+    "mi2"
+  ],
+  "Current": [
+    "A",
+    "mA"
+  ],
+  "Force": [
+    "N",
+    "kN",
+    "daN",
+    "kdaN",
+    "g",
+    "g-force",
+    "TONNEf",
+    "lbf",
+    "klbf",
+    "TONf US",
+    "TONf(long)"
+  ],
+  "Length Per Angle": [
+    "mm/rev",
+    "m/rev",
+    "in/rev"
+  ],
+  "Mass": [
+    "mcg",
+    "mg",
+    "g",
+    "kg",
+    "ton",
+    "oz",
+    "sack",
+    "sck",
+    "100lb",
+    "lb",
+    "lbs",
+    "lbm",
+    "klbs",
+    "kLBS"
+  ],
+  "Mass Flow Rate": [
+    "mcg/s",
+    "mcg/min",
+    "mcg/h",
+    "mg/s",
+    "mg/min",
+    "mg/h",
+    "g/s",
+    "g/min",
+    "g/h",
+    "kg/s",
+    "kg/min",
+    "kg/h",
+    "ton/s",
+    "ton/min",
+    "ton/h",
+    "oz/s",
+    "oz/min",
+    "oz/h",
+    "lb/s",
+    "lb/min",
+    "lb/h"
+  ],
+  "Mass per length": [
+    "kg-m",
+    "lb-ft",
+    "klb-ft"
+  ],
+  "Volume Flow Rate": [
+    "mm3/s",
+    "cm3/s",
+    "ml/s",
+    "cl/s",
+    "dl/s",
+    "l/s",
+    "l/min",
+    "L/min",
+    "l/h",
+    "kl/s",
+    "kl/min",
+    "kl/h",
+    "m3/s",
+    "m3/min",
+    "m3/h",
+    "km3/s",
+    "ml/30min",
+    "mL/30 min",
+    "tsp/s",
+    "Tbs/s",
+    "in3/s",
+    "in3/min",
+    "in3/h",
+    "fl-oz/s",
+    "fl-oz/min",
+    "fl-oz/h",
+    "cup/s",
+    "pnt/s",
+    "pnt/min",
+    "pnt/h",
+    "qt/s",
+    "gal/s",
+    "gal/min",
+    "gal_per_min",
+    "gal/h",
+    "bbl/s",
+    "bbl/min",
+    "bbl/h",
+    "ft3/s",
+    "ft3/min",
+    "ft3/h",
+    "yd3/s",
+    "yd3/min",
+    "yd3/h"
+  ],
+  "Power": [
+    "mhp",
+    "watt",
+    "hp"
+  ],
+  "Inverse Pressure": [
+    "i-pa",
+    "i-kPa",
+    "i-bar",
+    "i-psi",
+    "i-ksi"
+  ],
+  "Pressure Gradient": [
+    "kPa/m",
+    "Pa/m",
+    "psi/ft"
+  ],
+  "Proportion": [
+    "%",
+    "percent",
+    "flow_percent",
+    "Fraction",
+    "0-1"
+  ],
+  "Revolution Per Volume": [
+    "rpl",
+    "rpg"
+  ],
+  "Time": [
+    "ns",
+    "mu",
+    "ms",
+    "s",
+    "sec",
+    "min",
+    "h",
+    "d",
+    "day",
+    "week",
+    "month",
+    "year"
+  ],
+  "Torque": [
+    "Nm",
+    "kNm",
+    "kN.m",
+    "J",
+    "ft-lbf",
+    "ft.lbf",
+    "ft-klbf",
+    "kft-lbf",
+    "ft.klbf"
+  ],
+  "Voltage": [
+    "V",
+    "mV",
+    "nV"
+  ],
+  "Volume Concentration": [
+    "l/m3",
+    "gal/Mgal"
+  ],
+  "Length": [
+    "m",
+    "m.",
+    "meter",
+    "meters",
+    "km",
+    "yd",
+    "ft",
+    "f",
+    "'",
+    "feet",
+    "ftUS",
+    "mi",
+    "32nd",
+    "32nd in",
+    "in/32"
+  ],
+  "Resistivity": [
+    "ohmm",
+    "ohm.m",
+    "ohm-"
+  ],
+  "Formation Density": [
+    "g/cm3",
+    "g/c3",
+    "g/cc"
+  ],
+  "Density": [
+    "Sg",
+    "kg/m3",
+    "kg/cm3",
+    "g/l",
+    "g/m3",
+    "gm/3",
+    "gm/c",
+    "kPa/m",
+    "mg/l",
+    "mg/L",
+    "lb/gal",
+    "lbm/gal",
+    "lbm/galUS",
+    "lbs/galUS",
+    "lbs_per_gal",
+    "ppg",
+    "lbm/galUS",
+    "lb/bbl",
+    "lbm/bbl",
+    "lb/Mgal",
+    "lbm/Mgal",
+    "lb/ft3",
+    "lb/in3",
+    "psi/ft",
+    "psi/1000ft"
+  ],
+  "Porosity": [
+    "v/v",
+    "pu"
+  ],
+  "Permiability": [
+    "md"
+  ],
+  "Acoustic Slowness": [
+    "us/m",
+    "us/f",
+    "us/ft"
+  ],
+  "Temperature": [
+    "C",
+    "degc",
+    "degC",
+    "°C",
+    "K",
+    "degk",
+    "degK",
+    "F",
+    "degf",
+    "degF",
+    "°F",
+    "deg/F"
+  ],
+  "Short Length": [
+    "in",
+    "inch",
+    "inches",
+    "\"",
+    "ins",
+    "inus",
+    "mm",
+    "cm"
+  ],
+  "Strokes Rate": [
+    "strokes/min",
+    "spm",
+    "1/m",
+    "1/min",
+    "strokes/sec",
+    "sps",
+    "1/s",
+    "strokes/h",
+    "sph",
+    "1/h"
+  ],
+  "Concentration": [
+    "ppm"
+  ],
+  "Velocity": [
+    "m/s",
+    "m/min",
+    "m/h",
+    "kph",
+    "mph",
+    "knot",
+    "ft/s",
+    "ft/min",
+    "ft/h",
+    "ft_per_hr"
+  ],
+  "Volume": [
+    "mm3",
+    "cm3",
+    "ml",
+    "mL",
+    "ml of",
+    "mL of",
+    "cl",
+    "dl",
+    "l",
+    "m3",
+    "km3",
+    "krm",
+    "tsk",
+    "msk",
+    "kkp",
+    "glas",
+    "kanna",
+    "tsp",
+    "Tbs",
+    "in3",
+    "fl-oz",
+    "cup",
+    "pnt",
+    "qt",
+    "gal",
+    "gals",
+    "ft3",
+    "yd3",
+    "bbl",
+    "bbls",
+    "barrels"
+  ],
+  "Mse Pressure": [
+    "kPa",
+    "ksi"
+  ],
+  "Pressure": [
+    "Pa",
+    "kPaAdjusted",
+    "kPaadjusted",
+    "MPa",
+    "hPa",
+    "bar",
+    "torr",
+    "psi",
+    "PSI",
+    "psiAdjusted",
+    "ksiAdjusted",
+    "psf",
+    "dsf",
+    "hsf",
+    "lbf/100 ft2",
+    "lbf/100ft2",
+    "lbf/(100·ft²)",
+    "lb/100ft2"
+  ],
+  "Gamma Radiation": [
+    "API",
+    "api",
+    "api units"
+  ],
+  "Other": [
+    "*"
+  ]
+}

package/definitions/unitless.json

@@ -0,0 +1,34 @@
+{
+  "metric": {
+    "unitless": {
+      "name": {
+        "singular": "unitless",
+        "plural": "unitless",
+        "display": "unitless"
+      },
+      "to_anchor": 1,
+      "aliases": ["unitless", "On/Off", "None", "EUC", "Euc", "UNITLESS", "Unitless"]
+    }
+  },
+  "imperial": {
+    "unitless": {
+      "name": {
+        "singular": "unitless",
+        "plural": "unitless",
+        "display": "unitless"
+      },
+      "to_anchor": 1,
+      "aliases": ["unitless", "On/Off", "None", "EUC", "Euc", "UNITLESS", "Unitless"]
+    }
+  },
+  "_anchors": {
+    "metric": {
+      "unit": "unitless",
+      "ratio": 1
+    },
+    "imperial": {
+      "unit": "unitless",
+      "ratio": 1
+    }
+  }
+}

package/definitions/viscosity.json

@@ -0,0 +1,28 @@
+{
+  "metric": {
+    "mpas": {
+      "name": {
+        "singular": "Millipascal-second",
+        "plural": "Millipascal-seconds",
+        "display": "mPa\u00b7s"
+      },
+      "to_anchor": 1,
+      "aliases": ["mpas", "cP", "mPa\u00b7s", "mPa.s", "mPa*s"]
+    },
+    "pas": {
+      "name": {
+        "singular": "Pascal-second",
+        "plural": "Pascal-seconds",
+        "display": "Pa\u00b7s"
+      },
+      "to_anchor": 1000,
+      "aliases": ["pas", "Pa\u00b7s", "Pa.s", "Pa*s"]
+    }
+  },
+  "_anchors": {
+    "metric": {
+      "unit": "s",
+      "ratio": 1
+    }
+  }
+}

package/definitions/voltage.json

@@ -0,0 +1,70 @@
+{
+  "metric": {
+    "V": {
+      "name": {
+        "singular": "Volt",
+        "plural": "Volts",
+        "display": "V"
+      },
+      "to_anchor": 1000,
+      "aliases": ["V"]
+    },
+    "mV": {
+      "name": {
+        "singular": "Millivolt",
+        "plural": "Millivolts",
+        "display": "mV"
+      },
+      "to_anchor": 1,
+      "aliases": ["mV"]
+    },
+    "nV": {
+      "name": {
+        "singular": "Nanovolt",
+        "plural": "Nanovolts",
+        "display": "nV"
+      },
+      "to_anchor": 0.000001,
+      "aliases": ["nV"]
+    }
+  },
+  "imperial": {
+    "V": {
+      "name": {
+        "singular": "Volt",
+        "plural": "Volts",
+        "display": "V"
+      },
+      "to_anchor": 1000,
+      "aliases": ["V"]
+    },
+    "mV": {
+      "name": {
+        "singular": "Millivolt",
+        "plural": "Millivolts",
+        "display": "mV"
+      },
+      "to_anchor": 1,
+      "aliases": ["mV"]
+    },
+    "nV": {
+      "name": {
+        "singular": "Nanovolt",
+        "plural": "Nanovolts",
+        "display": "nV"
+      },
+      "to_anchor": 0.000001,
+      "aliases": ["nV"]
+    }
+  },
+  "_anchors": {
+    "metric": {
+      "unit": "mV",
+      "ratio": 1
+    },
+    "imperial": {
+      "unit": "mV",
+      "ratio": 1
+    }
+  }
+}