@cornerstonejs/core 2.0.0-beta.8 → 2.0.1

package/src/RenderingEngine/vtkClasses/vtkSlabCamera.ts

@@ -1,922 +0,0 @@
-import macro from '@kitware/vtk.js/macros';
-import vtkCamera from '@kitware/vtk.js/Rendering/Core/Camera';
-import vtkMath from '@kitware/vtk.js/Common/Core/Math';
-import { vec3, mat4 } from 'gl-matrix';
-import type { vtkObject } from '@kitware/vtk.js/interfaces';
-
-// Copied from VTKCamera
-
-/**
- *
- */
-interface ICameraInitialValues {
-  position?: number[];
-  focalPoint?: number[];
-  viewUp?: number[];
-  directionOfProjection?: number[];
-  parallelProjection?: boolean;
-  useHorizontalViewAngle?: boolean;
-  viewAngle?: number;
-  parallelScale?: number;
-  clippingRange?: number[];
-  windowCenter?: number[];
-  viewPlaneNormal?: number[];
-  useOffAxisProjection?: boolean;
-  screenBottomLeft?: number[];
-  screenBottomRight?: number[];
-  screenTopRight?: number[];
-  freezeFocalPoint?: boolean;
-  physicalTranslation?: number[];
-  physicalScale?: number;
-  physicalViewUp?: number[];
-  physicalViewNorth?: number[];
-}
-
-export interface vtkSlabCamera extends vtkObject {
-  /**
-   * Apply a transform to the camera.
-   * The camera position, focal-point, and view-up are re-calculated
-   * using the transform's matrix to multiply the old points by the new transform.
-   * @param transformMat4 -
-   */
-  applyTransform(transformMat4: mat4): void;
-
-  /**
-   * Rotate the camera about the view up vector centered at the focal point.
-   * @param angle -
-   */
-  azimuth(angle: number): void;
-
-  /**
-   *
-   * @param bounds -
-   */
-  computeClippingRange(bounds: number[]): number[];
-
-  /**
-   * This method must be called when the focal point or camera position changes
-   */
-  computeDistance(): void;
-
-  /**
-   * the provided matrix should include
-   * translation and orientation only
-   * mat is physical to view
-   * @param mat -
-   */
-  computeViewParametersFromPhysicalMatrix(mat: mat4): void;
-
-  /**
-   *
-   * @param vmat -
-   */
-  computeViewParametersFromViewMatrix(vmat: mat4): void;
-
-  /**
-   * Not implemented yet
-   * @param sourceCamera -
-   */
-  deepCopy(sourceCamera: vtkSlabCamera): void;
-
-  /**
-   * Move the position of the camera along the view plane normal. Moving
-   * towards the focal point (e.g., greater than 1) is a dolly-in, moving away
-   * from the focal point (e.g., less than 1) is a dolly-out.
-   * @param amount -
-   */
-  dolly(amount: number): void;
-
-  /**
-   * Rotate the camera about the cross product of the negative of the direction of projection and the view up vector, using the focal point as the center of rotation.
-   * @param angle  -
-   */
-  elevation(angle: number): void;
-
-  /**
-   * Not implemented yet
-   */
-  getCameraLightTransformMatrix(): void;
-
-  /**
-   *
-   * @defaultValue [0.01, 1000.01],
-   */
-  getClippingRange(): number[];
-
-  /**
-   *
-   * @defaultValue [0.01, 1000.01],
-   */
-  getClippingRangeByReference(): number[];
-
-  /**
-   *
-   * @param aspect - Camera frustum aspect ratio.
-   * @param nearz - Camera frustum near plane.
-   * @param farz - Camera frustum far plane.
-   */
-  getCompositeProjectionMatrix(
-    aspect: number,
-    nearz: number,
-    farz: number
-  ): mat4;
-
-  /**
-   * Get the vector in the direction from the camera position to the focal point.
-   * @defaultValue [0, 0, -1],
-   */
-  getDirectionOfProjection(): number[];
-
-  /**
-   *
-   * @defaultValue [0, 0, -1],
-   */
-  getDirectionOfProjectionByReference(): number[];
-
-  /**
-   * Get the distance from the camera position to the focal point.
-   */
-  getDistance(): number;
-
-  /**
-   *
-   * @defaultValue [0, 0, 0]
-   */
-  getFocalPoint(): number[];
-
-  /**
-   *
-   */
-  getFocalPointByReference(): number[];
-
-  /**
-   *
-   * @defaultValue false
-   */
-  getFreezeFocalPoint(): boolean;
-
-  setFreezeFocalPoint(freeze: boolean): void;
-
-  /**
-   * Not implemented yet
-   * @param aspect - Camera frustum aspect ratio.
-   */
-  getFrustumPlanes(aspect: number): void;
-
-  /**
-   * Not implemented yet
-   */
-  getOrientation(): void;
-
-  /**
-   * Not implemented yet
-   */
-  getOrientationWXYZ(): void;
-
-  /**
-   *
-   * @defaultValue false
-   */
-  getParallelProjection(): boolean;
-
-  /**
-   *
-   * @defaultValue 1
-   */
-  getParallelScale(): number;
-
-  /**
-   *
-   * @defaultValue 1.0
-   */
-  getPhysicalScale(): number;
-
-  /**
-   *
-   * @param result -
-   */
-  getPhysicalToWorldMatrix(result: mat4): void;
-
-  /**
-   *
-   */
-  getPhysicalTranslation(): number[];
-
-  /**
-   *
-   */
-  getPhysicalTranslationByReference(): number[];
-
-  /**
-   *
-   * @defaultValue [0, 0, -1],
-   */
-  getPhysicalViewNorth(): number[];
-
-  /**
-   *
-   */
-  getPhysicalViewNorthByReference(): number[];
-
-  /**
-   *
-   * @defaultValue [0, 1, 0]
-   */
-  getPhysicalViewUp(): number[];
-
-  /**
-   *
-   */
-  getPhysicalViewUpByReference(): number[];
-
-  /**
-   * Get the position of the camera in world coordinates.
-   * @defaultValue [0, 0, 1]
-   */
-  getPosition(): number[];
-
-  /**
-   *
-   */
-  getPositionByReference(): number[];
-
-  /**
-   *
-   * @param aspect - Camera frustum aspect ratio.
-   * @param nearz - Camera frustum near plane.
-   * @param farz - Camera frustum far plane.
-   * @defaultValue null
-   */
-  getProjectionMatrix(aspect: number, nearz: number, farz: number): null | mat4;
-
-  /**
-   * Not implemented yet
-   * Get the roll angle of the camera about the direction of projection.
-   */
-  getRoll(): void;
-
-  /**
-   * Get top left corner point of the screen.
-   * @defaultValue [-0.5, -0.5, -0.5]
-   */
-  getScreenBottomLeft(): number[];
-
-  /**
-   *
-   * @defaultValue [-0.5, -0.5, -0.5]
-   */
-  getScreenBottomLeftByReference(): number[];
-
-  /**
-   * Get bottom left corner point of the screen
-   * @defaultValue [0.5, -0.5, -0.5]
-   */
-  getScreenBottomRight(): number[];
-
-  /**
-   *
-   * @defaultValue [0.5, -0.5, -0.5]
-   */
-  getScreenBottomRightByReference(): number[];
-
-  /**
-   *
-   * @defaultValue [0.5, 0.5, -0.5]
-   */
-  getScreenTopRight(): number[];
-
-  /**
-   *
-   * @defaultValue [0.5, 0.5, -0.5]
-   */
-  getScreenTopRightByReference(): number[];
-
-  /**
-   * Get the center of the window in viewport coordinates.
-   */
-  getThickness(): number;
-
-  /**
-   * Get the value of the UseHorizontalViewAngle instance variable.
-   * @defaultValue false
-   */
-  getUseHorizontalViewAngle(): boolean;
-
-  /**
-   * Get use offaxis frustum.
-   * @defaultValue false
-   */
-  getUseOffAxisProjection(): boolean;
-
-  /**
-   * Get the camera view angle.
-   * @defaultValue 30
-   */
-  getViewAngle(): number;
-
-  /**
-   *
-   * @defaultValue null
-   */
-  getViewMatrix(): null | mat4;
-
-  /**
-   * Get the ViewPlaneNormal.
-   * This vector will point opposite to the direction of projection,
-   * unless you have created a sheared output view using SetViewShear/SetObliqueAngles.
-   * @defaultValue [0, 0, 1]
-   */
-  getViewPlaneNormal(): number[];
-
-  /**
-   * Get the ViewPlaneNormal by reference.
-   */
-  getViewPlaneNormalByReference(): number[];
-
-  /**
-   * Get ViewUp vector.
-   * @defaultValue [0, 1, 0]
-   */
-  getViewUp(): number[];
-
-  /**
-   * Get ViewUp vector by reference.
-   * @defaultValue [0, 1, 0]
-   */
-  getViewUpByReference(): number[];
-
-  /**
-   * Get the center of the window in viewport coordinates.
-   * The viewport coordinate range is ([-1,+1],[-1,+1]).
-   * @defaultValue [0, 0]
-   */
-  getWindowCenter(): number[];
-
-  /**
-   *
-   * @defaultValue [0, 0]
-   */
-  getWindowCenterByReference(): number[];
-
-  /**
-   *
-   * @param result -
-   */
-  getWorldToPhysicalMatrix(result: mat4): void;
-
-  /**
-   *
-   * @defaultValue false
-   */
-  getIsPerformingCoordinateTransformation(status: boolean): void;
-
-  /**
-   * Recompute the ViewUp vector to force it to be perpendicular to the camera's focalpoint vector.
-   */
-  orthogonalizeViewUp(): void;
-
-  /**
-   *
-   * @param ori -
-   */
-  physicalOrientationToWorldDirection(ori: number[]): any;
-
-  /**
-   * Rotate the focal point about the cross product of the view up vector and the direction of projection, using the camera's position as the center of rotation.
-   * @param angle -
-   */
-  pitch(angle: number): void;
-
-  /**
-   * Rotate the camera about the direction of projection.
-   * @param angle -
-   */
-  roll(angle: number): void;
-
-  /**
-   * Set the location of the near and far clipping planes along the direction
-   * of projection.
-   * @param near -
-   * @param far -
-   */
-  setClippingRange(near: number, far: number): boolean;
-
-  /**
-   * Set the location of the near and far clipping planes along the direction
-   * of projection.
-   * @param clippingRange -
-   */
-  setClippingRange(clippingRange: number[]): boolean;
-
-  /**
-   *
-   * @param clippingRange -
-   */
-  setClippingRangeFrom(clippingRange: number[]): boolean;
-
-  /**
-   * used to handle convert js device orientation angles
-   * when you use this method the camera will adjust to the
-   * device orientation such that the physicalViewUp you set
-   * in world coordinates looks up, and the physicalViewNorth
-   * you set in world coorindates will (maybe) point north
-   *
-   * NOTE WARNING - much of the documentation out there on how
-   * orientation works is seriously wrong. Even worse the Chrome
-   * device orientation simulator is completely wrong and should
-   * never be used. OMG it is so messed up.
-   *
-   * how it seems to work on iOS is that the device orientation
-   * is specified in extrinsic angles with a alpha, beta, gamma
-   * convention with axes of Z, X, Y (the code below substitutes
-   * the physical coordinate system for these axes to get the right
-   * modified coordinate system.
-   * @param alpha -
-   * @param beta -
-   * @param gamma -
-   * @param screen -
-   */
-  setDeviceAngles(
-    alpha: number,
-    beta: number,
-    gamma: number,
-    screen: number
-  ): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setDirectionOfProjection(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param distance -
-   */
-  setDistance(distance: number): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setFocalPoint(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param focalPoint -
-   */
-  setFocalPointFrom(focalPoint: number[]): boolean;
-
-  /**
-   * Not implement yet
-   * Set the oblique viewing angles.
-   * The first angle, alpha, is the angle (measured from the horizontal) that rays along
-   * the direction of projection will follow once projected onto the 2D screen.
-   * The second angle, beta, is the angle between the view plane and the direction of projection.
-   * This creates a shear transform x' = x + dz*cos(alpha)/tan(beta), y' = dz*sin(alpha)/tan(beta) where dz is the distance of the point from the focal plane.
-   * The angles are (45,90) by default. Oblique projections commonly use (30,63.435).
-   *
-   * @param alpha -
-   * @param beta -
-   */
-  setObliqueAngles(alpha: number, beta: number): boolean;
-
-  /**
-   *
-   * @param degrees -
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setOrientationWXYZ(degrees: number, x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param parallelProjection -
-   */
-  setParallelProjection(parallelProjection: boolean): boolean;
-
-  /**
-   *
-   * @param parallelScale -
-   */
-  setParallelScale(parallelScale: number): boolean;
-
-  /**
-   *
-   * @param physicalScale -
-   */
-  setPhysicalScale(physicalScale: number): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setPhysicalTranslation(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param physicalTranslation -
-   */
-  setPhysicalTranslationFrom(physicalTranslation: number[]): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setPhysicalViewNorth(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param physicalViewNorth -
-   */
-  setPhysicalViewNorthFrom(physicalViewNorth: number[]): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setPhysicalViewUp(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param physicalViewUp -
-   */
-  setPhysicalViewUpFrom(physicalViewUp: number[]): boolean;
-
-  /**
-   * Set the position of the camera in world coordinates.
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setPosition(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param mat -
-   */
-  setProjectionMatrix(mat: mat4): boolean;
-
-  /**
-   * Set the roll angle of the camera about the direction of projection.
-   * todo Not implemented yet
-   * @param angle -
-   */
-  setRoll(angle: number): boolean;
-
-  /**
-   * Set top left corner point of the screen.
-   *
-   * This will be used only for offaxis frustum calculation.
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setScreenBottomLeft(x: number, y: number, z: number): boolean;
-
-  /**
-   * Set top left corner point of the screen.
-   *
-   * This will be used only for offaxis frustum calculation.
-   * @param screenBottomLeft -
-   */
-  setScreenBottomLeft(screenBottomLeft: number[]): boolean;
-
-  /**
-   *
-   * @param screenBottomLeft -
-   */
-  setScreenBottomLeftFrom(screenBottomLeft: number[]): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setScreenBottomRight(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param screenBottomRight -
-   */
-  setScreenBottomRight(screenBottomRight: number[]): boolean;
-
-  /**
-   *
-   * @param screenBottomRight -
-   */
-  setScreenBottomRightFrom(screenBottomRight: number[]): boolean;
-
-  /**
-   * Set top right corner point of the screen.
-   *
-   * This will be used only for offaxis frustum calculation.
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setScreenTopRight(x: number, y: number, z: number): boolean;
-
-  /**
-   * Set top right corner point of the screen.
-   *
-   * This will be used only for offaxis frustum calculation.
-   * @param screenTopRight -
-   */
-  setScreenTopRight(screenTopRight: number[]): boolean;
-
-  /**
-   *
-   * @param screenTopRight -
-   */
-  setScreenTopRightFrom(screenTopRight: number[]): boolean;
-
-  /**
-   * Set the distance between clipping planes.
-   *
-   * This method adjusts the far clipping plane to be set a distance 'thickness' beyond the near clipping plane.
-   * @param thickness -
-   */
-  setThickness(thickness: number): boolean;
-
-  /**
-   *
-   * @param thickness -
-   */
-  setThicknessFromFocalPoint(thickness: number): boolean;
-
-  /**
-   *
-   * @param useHorizontalViewAngle -
-   */
-  setUseHorizontalViewAngle(useHorizontalViewAngle: boolean): boolean;
-
-  /**
-   * Set use offaxis frustum.
-   *
-   * OffAxis frustum is used for off-axis frustum calculations specifically for
-   * stereo rendering. For reference see "High Resolution Virtual Reality", in
-   * Proc. SIGGRAPH '92, Computer Graphics, pages 195-202, 1992.
-   * @param useOffAxisProjection -
-   */
-  setUseOffAxisProjection(useOffAxisProjection: boolean): boolean;
-
-  /**
-   * Set the camera view angle, which is the angular height of the camera view measured in degrees.
-   * @param viewAngle -
-   */
-  setViewAngle(viewAngle: number): boolean;
-
-  /**
-   *
-   * @param mat -
-   */
-  setViewMatrix(mat: mat4): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  setViewUp(x: number, y: number, z: number): boolean;
-
-  /**
-   *
-   * @param viewUp -
-   */
-  setViewUp(viewUp: number[]): boolean;
-
-  /**
-   *
-   * @param viewUp -
-   */
-  setViewUpFrom(viewUp: number[]): boolean;
-
-  /**
-   * Set the center of the window in viewport coordinates.
-   * The viewport coordinate range is ([-1,+1],[-1,+1]).
-   * This method is for if you have one window which consists of several viewports, or if you have several screens which you want to act together as one large screen
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   */
-  setWindowCenter(x: number, y: number): boolean;
-
-  /**
-   * Set the center of the window in viewport coordinates from an array.
-   * @param windowCenter -
-   */
-  setWindowCenterFrom(windowCenter: number[]): boolean;
-
-  /**
-   *
-   * @param x - The x coordinate.
-   * @param y - The y coordinate.
-   * @param z - The z coordinate.
-   */
-  translate(x: number, y: number, z: number): void;
-
-  /**
-   * Rotate the focal point about the view up vector, using the camera's position as the center of rotation.
-   * @param angle -
-   */
-  yaw(angle: number): void;
-
-  /**
-   * In perspective mode, decrease the view angle by the specified factor.
-   * @param factor -
-   */
-  zoom(factor: number): void;
-
-  /**
-   * Activate camera clipping customization necessary when doing coordinate transformations
-   * @param status -
-   */
-  setIsPerformingCoordinateTransformation(status: boolean): void;
-}
-
-const DEFAULT_VALUES = {
-  isPerformingCoordinateTransformation: false,
-};
-
-/**
- * Method use to decorate a given object (publicAPI+model) with vtkRenderer characteristics.
- *
- * @param publicAPI - object on which methods will be bounds (public)
- * @param model - object on which data structure will be bounds (protected)
- * @param initialValues -
- */
-function extend(
-  publicAPI: any,
-  model: any,
-  initialValues: ICameraInitialValues = {}
-): void {
-  Object.assign(model, DEFAULT_VALUES, initialValues);
-
-  vtkCamera.extend(publicAPI, model, initialValues);
-
-  macro.setGet(publicAPI, model, ['isPerformingCoordinateTransformation']);
-
-  // Object methods
-  vtkSlabCamera(publicAPI, model);
-}
-
-/**
- * Method use to create a new instance of vtkCamera with its focal point at the origin,
- * and position=(0,0,1). The view up is along the y-axis, view angle is 30 degrees,
- * and the clipping range is (.1,1000).
- * @param initialValues - for pre-setting some of its content
- */
-const newInstance: (initialValues?: ICameraInitialValues) => vtkSlabCamera =
-  macro.newInstance(extend, 'vtkSlabCamera');
-
-/**
- * vtkCamera is a virtual camera for 3D rendering. It provides methods
- * to position and orient the view point and focal point. Convenience
- * methods for moving about the focal point also are provided. More
- * complex methods allow the manipulation of the computer graphics model
- * including view up vector, clipping planes, and camera perspective.
- */
-
-/**
- * vtkSlabCamera - A derived class of the core vtkCamera class
- *
- * This customization is necesssary because when we do coordinate transformations
- * we need to set the cRange between [d, d + 0.1],
- * where d is distance between the camera position and the focal point.
- * While when we render we set to the clippingRange [0.01, d * 2],
- * where d is the calculated from the bounds of all the actors.
- *
- * @param {*} publicAPI The public API to extend
- * @param {*} model The private model to extend.
- */
-function vtkSlabCamera(publicAPI, model) {
-  model.classHierarchy.push('vtkSlabCamera');
-
-  // Set up private variables and methods
-  const tmpMatrix = mat4.identity(new Float64Array(16) as unknown as mat4);
-  const tmpvec1 = new Float64Array(3) as unknown as vec3;
-
-  /**
-   * getProjectionMatrix - A fork of vtkCamera's getProjectionMatrix method.
-   * This fork performs most of the same actions, but define crange around
-   * model.distance when doing coordinate transformations.
-   */
-  publicAPI.getProjectionMatrix = (aspect, nearz, farz) => {
-    const result = mat4.create();
-
-    if (model.projectionMatrix) {
-      const scale = 1 / model.physicalScale;
-      vec3.set(tmpvec1, scale, scale, scale);
-
-      mat4.copy(result, model.projectionMatrix);
-      mat4.scale(result, result, tmpvec1);
-      mat4.transpose(result, result);
-      return result;
-    }
-
-    mat4.identity(tmpMatrix);
-
-    let cRange0 = model.clippingRange[0];
-    let cRange1 = model.clippingRange[1];
-    if (model.isPerformingCoordinateTransformation) {
-      /**
-       * NOTE: this is necessary because we want the coordinate transformation
-       * respect to the view plane (plane orthogonal to the camera and passing to
-       * the focal point).
-       *
-       * When vtk.js computes the coordinate transformations, it simply uses the
-       * camera matrix (no ray casting).
-       *
-       * However for the volume viewport the clipping range is set to be
-       * (-RENDERING_DEFAULTS.MAXIMUM_RAY_DISTANCE, RENDERING_DEFAULTS.MAXIMUM_RAY_DISTANCE).
-       * The clipping range is used in the camera method getProjectionMatrix().
-       * The projection matrix is used then for viewToWorld/worldToView methods of
-       * the renderer. This means that vkt.js will not return the coordinates of
-       * the point on the view plane (i.e. the depth coordinate will corresponded
-       * to the focal point).
-       *
-       * Therefore the clipping range has to be set to (distance, distance + 0.01),
-       * where now distance is the distance between the camera position and focal
-       * point. This is done internally, in our camera customization when the flag
-       * isPerformingCoordinateTransformation is set to true.
-       */
-      cRange0 = model.distance;
-      cRange1 = model.distance + 0.1;
-    }
-
-    const cWidth = cRange1 - cRange0;
-    const cRange = [
-      cRange0 + ((nearz + 1) * cWidth) / 2.0,
-      cRange0 + ((farz + 1) * cWidth) / 2.0,
-    ];
-
-    if (model.parallelProjection) {
-      // set up a rectangular parallelipiped
-      const width = model.parallelScale * aspect;
-      const height = model.parallelScale;
-
-      const xmin = (model.windowCenter[0] - 1.0) * width;
-      const xmax = (model.windowCenter[0] + 1.0) * width;
-      const ymin = (model.windowCenter[1] - 1.0) * height;
-      const ymax = (model.windowCenter[1] + 1.0) * height;
-
-      mat4.ortho(tmpMatrix, xmin, xmax, ymin, ymax, cRange[0], cRange[1]);
-      mat4.transpose(tmpMatrix, tmpMatrix);
-    } else if (model.useOffAxisProjection) {
-      throw new Error('Off-Axis projection is not supported at this time');
-    } else {
-      const tmp = Math.tan(vtkMath.radiansFromDegrees(model.viewAngle) / 2.0);
-      let width;
-      let height;
-      if (model.useHorizontalViewAngle === true) {
-        width = cRange0 * tmp;
-        height = (cRange0 * tmp) / aspect;
-      } else {
-        width = cRange0 * tmp * aspect;
-        height = cRange0 * tmp;
-      }
-
-      const xmin = (model.windowCenter[0] - 1.0) * width;
-      const xmax = (model.windowCenter[0] + 1.0) * width;
-      const ymin = (model.windowCenter[1] - 1.0) * height;
-      const ymax = (model.windowCenter[1] + 1.0) * height;
-      const znear = cRange[0];
-      const zfar = cRange[1];
-
-      tmpMatrix[0] = (2.0 * znear) / (xmax - xmin);
-      tmpMatrix[5] = (2.0 * znear) / (ymax - ymin);
-      tmpMatrix[2] = (xmin + xmax) / (xmax - xmin);
-      tmpMatrix[6] = (ymin + ymax) / (ymax - ymin);
-      tmpMatrix[10] = -(znear + zfar) / (zfar - znear);
-      tmpMatrix[14] = -1.0;
-      tmpMatrix[11] = (-2.0 * znear * zfar) / (zfar - znear);
-      tmpMatrix[15] = 0.0;
-    }
-
-    mat4.copy(result, tmpMatrix);
-
-    return result;
-  };
-}
-
-// ----------------------------------------------------------------------------
-// Object factory
-// ----------------------------------------------------------------------------
-
-// ----------------------------------------------------------------------------
-
-export default { newInstance, extend };
-export { newInstance, extend };