@corellium/corellium-cli 1.1.1 → 1.2.0

package/node_modules/d3-ease/LICENSE

@@ -1,28 +0,0 @@
-Copyright 2010-2016 Mike Bostock
-Copyright 2001 Robert Penner
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
-  list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright notice,
-  this list of conditions and the following disclaimer in the documentation
-  and/or other materials provided with the distribution.
-
-* Neither the name of the author nor the names of contributors may be used to
-  endorse or promote products derived from this software without specific prior
-  written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

package/node_modules/d3-ease/README.md

@@ -1,241 +0,0 @@
-# d3-ease
-
-*Easing* is a method of distorting time to control apparent motion in animation. It is most commonly used for [slow-in, slow-out](https://en.wikipedia.org/wiki/12_basic_principles_of_animation#Slow_In_and_Slow_Out). By easing time, [animated transitions](https://github.com/d3/d3-transition) are smoother and exhibit more plausible motion.
-
-The easing types in this module implement the [ease method](#ease_ease), which takes a normalized time *t* and returns the corresponding “eased” time *tʹ*. Both the normalized time and the eased time are typically in the range [0,1], where 0 represents the start of the animation and 1 represents the end; some easing types, such as [elastic](#easeElastic), may return eased times slightly outside this range. A good easing type should return 0 if *t* = 0 and 1 if *t* = 1. See the [easing explorer](https://observablehq.com/@d3/easing) for a visual demonstration.
-
-These easing types are largely based on work by [Robert Penner](http://robertpenner.com/easing/).
-
-## Installing
-
-If you use NPM, `npm install d3-ease`. Otherwise, download the [latest release](https://github.com/d3/d3-ease/releases/latest). You can also load directly from [d3js.org](https://d3js.org), either as a [standalone library](https://d3js.org/d3-ease.v1.min.js) or as part of [D3](https://github.com/d3/d3). AMD, CommonJS, and vanilla environments are supported. In vanilla, a `d3` global is exported:
-
-```html
-<script src="https://d3js.org/d3-ease.v1.min.js"></script>
-<script>
-
-var ease = d3.easeCubic;
-
-</script>
-```
-
-[Try d3-ease in your browser.](https://observablehq.com/@d3/easing-animations)
-
-## API Reference
-
-<a name="_ease" href="#_ease">#</a> <i>ease</i>(<i>t</i>)
-
-Given the specified normalized time *t*, typically in the range [0,1], returns the “eased” time *tʹ*, also typically in [0,1]. 0 represents the start of the animation and 1 represents the end. A good implementation returns 0 if *t* = 0 and 1 if *t* = 1. See the [easing explorer](https://observablehq.com/@d3/easing) for a visual demonstration. For example, to apply [cubic](#easeCubic) easing:
-
-```js
-var te = d3.easeCubic(t);
-```
-
-Similarly, to apply custom [elastic](#easeElastic) easing:
-
-```js
-// Before the animation starts, create your easing function.
-var customElastic = d3.easeElastic.period(0.4);
-
-// During the animation, apply the easing function.
-var te = customElastic(t);
-```
-
-<a name="easeLinear" href="#easeLinear">#</a> d3.<b>easeLinear</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/linear.js "Source")
-
-Linear easing; the identity function; *linear*(*t*) returns *t*.
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/linear.png" alt="linear">](https://observablehq.com/@d3/easing#linear)
-
-<a name="easePolyIn" href="#easePolyIn">#</a> d3.<b>easePolyIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/poly.js#L3 "Source")
-
-Polynomial easing; raises *t* to the specified [exponent](#poly_exponent). If the exponent is not specified, it defaults to 3, equivalent to [cubicIn](#easeCubicIn).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/polyIn.png" alt="polyIn">](https://observablehq.com/@d3/easing#polyIn)
-
-<a name="easePolyOut" href="#easePolyOut">#</a> d3.<b>easePolyOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/poly.js#L15 "Source")
-
-Reverse polynomial easing; equivalent to 1 - [polyIn](#easePolyIn)(1 - *t*). If the [exponent](#poly_exponent) is not specified, it defaults to 3, equivalent to [cubicOut](#easeCubicOut).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/polyOut.png" alt="polyOut">](https://observablehq.com/@d3/easing#polyOut)
-
-<a name="easePoly" href="#easePoly">#</a> d3.<b>easePoly</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/poly.js "Source")
-<br><a name="easePolyInOut" href="#easePolyInOut">#</a> d3.<b>easePolyInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/poly.js#L27 "Source")
-
-Symmetric polynomial easing; scales [polyIn](#easePolyIn) for *t* in [0, 0.5] and [polyOut](#easePolyOut) for *t* in [0.5, 1]. If the [exponent](#poly_exponent) is not specified, it defaults to 3, equivalent to [cubic](#easeCubic).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/polyInOut.png" alt="polyInOut">](https://observablehq.com/@d3/easing#polyInOut)
-
-<a name="poly_exponent" href="#poly_exponent">#</a> <i>poly</i>.<b>exponent</b>(<i>e</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/poly.js#L1 "Source")
-
-Returns a new polynomial easing with the specified exponent *e*. For example, to create equivalents of [linear](#easeLinear), [quad](#easeQuad), and [cubic](#easeCubic):
-
-```js
-var linear = d3.easePoly.exponent(1),
-    quad = d3.easePoly.exponent(2),
-    cubic = d3.easePoly.exponent(3);
-```
-
-<a name="easeQuadIn" href="#easeQuadIn">#</a> d3.<b>easeQuadIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/quad.js#L1 "Source")
-
-Quadratic easing; equivalent to [polyIn](#easePolyIn).[exponent](#poly_exponent)(2).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/quadIn.png" alt="quadIn">](https://observablehq.com/@d3/easing#quadIn)
-
-<a name="easeQuadOut" href="#easeQuadOut">#</a> d3.<b>easeQuadOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/quad.js#L5 "Source")
-
-Reverse quadratic easing; equivalent to 1 - [quadIn](#easeQuadIn)(1 - *t*). Also equivalent to [polyOut](#easePolyOut).[exponent](#poly_exponent)(2).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/quadOut.png" alt="quadOut">](https://observablehq.com/@d3/easing#quadOut)
-
-<a name="easeQuad" href="#easeQuad">#</a> d3.<b>easeQuad</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/quad.js "Source")
-<br><a name="easeQuadInOut" href="#easeQuadInOut">#</a> d3.<b>easeQuadInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/quad.js#L9 "Source")
-
-Symmetric quadratic easing; scales [quadIn](#easeQuadIn) for *t* in [0, 0.5] and [quadOut](#easeQuadOut) for *t* in [0.5, 1]. Also equivalent to [poly](#easePoly).[exponent](#poly_exponent)(2).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/quadInOut.png" alt="quadInOut">](https://observablehq.com/@d3/easing#quadInOut)
-
-<a name="easeCubicIn" href="#easeCubicIn">#</a> d3.<b>easeCubicIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/cubic.js#L1 "Source")
-
-Cubic easing; equivalent to [polyIn](#easePolyIn).[exponent](#poly_exponent)(3).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/cubicIn.png" alt="cubicIn">](https://observablehq.com/@d3/easing#cubicIn)
-
-<a name="easeCubicOut" href="#easeCubicOut">#</a> d3.<b>easeCubicOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/cubic.js#L5 "Source")
-
-Reverse cubic easing; equivalent to 1 - [cubicIn](#easeCubicIn)(1 - *t*). Also equivalent to [polyOut](#easePolyOut).[exponent](#poly_exponent)(3).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/cubicOut.png" alt="cubicOut">](https://observablehq.com/@d3/easing#cubicOut)
-
-<a name="easeCubic" href="#easeCubic">#</a> d3.<b>easeCubic</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/cubic.js "Source")
-<br><a name="easeCubicInOut" href="#easeCubicInOut">#</a> d3.<b>easeCubicInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/cubic.js#L9 "Source")
-
-Symmetric cubic easing; scales [cubicIn](#easeCubicIn) for *t* in [0, 0.5] and [cubicOut](#easeCubicOut) for *t* in [0.5, 1]. Also equivalent to [poly](#easePoly).[exponent](#poly_exponent)(3).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/cubicInOut.png" alt="cubicInOut">](https://observablehq.com/@d3/easing#cubicInOut)
-
-<a name="easeSinIn" href="#easeSinIn">#</a> d3.<b>easeSinIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/sin.js#L4 "Source")
-
-Sinusoidal easing; returns sin(*t*).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/sinIn.png" alt="sinIn">](https://observablehq.com/@d3/easing#sinIn)
-
-<a name="easeSinOut" href="#easeSinOut">#</a> d3.<b>easeSinOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/sin.js#L8 "Source")
-
-Reverse sinusoidal easing; equivalent to 1 - [sinIn](#easeSinIn)(1 - *t*).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/sinOut.png" alt="sinOut">](https://observablehq.com/@d3/easing#sinOut)
-
-<a name="easeSin" href="#easeSin">#</a> d3.<b>easeSin</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/sin.js "Source")
-<br><a name="easeSinInOut" href="#easeSinInOut">#</a> d3.<b>easeSinInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/sin.js#L12 "Source")
-
-Symmetric sinusoidal easing; scales [sinIn](#easeSinIn) for *t* in [0, 0.5] and [sinOut](#easeSinOut) for *t* in [0.5, 1].
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/sinInOut.png" alt="sinInOut">](https://observablehq.com/@d3/easing#sinInOut)
-
-<a name="easeExpIn" href="#easeExpIn">#</a> d3.<b>easeExpIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/exp.js#L1 "Source")
-
-Exponential easing; raises 2 to the exponent 10 \* (*t* - 1).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/expIn.png" alt="expIn">](https://observablehq.com/@d3/easing#expIn)
-
-<a name="easeExpOut" href="#easeExpOut">#</a> d3.<b>easeExpOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/exp.js#L5 "Source")
-
-Reverse exponential easing; equivalent to 1 - [expIn](#easeExpIn)(1 - *t*).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/expOut.png" alt="expOut">](https://observablehq.com/@d3/easing#expOut)
-
-<a name="easeExp" href="#easeExp">#</a> d3.<b>easeExp</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/exp.js "Source")
-<br><a name="easeExpInOut" href="#easeExpInOut">#</a> d3.<b>easeExpInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/exp.js#L9 "Source")
-
-Symmetric exponential easing; scales [expIn](#easeExpIn) for *t* in [0, 0.5] and [expOut](#easeExpOut) for *t* in [0.5, 1].
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/expInOut.png" alt="expInOut">](https://observablehq.com/@d3/easing#expInOut)
-
-<a name="easeCircleIn" href="#easeCircleIn">#</a> d3.<b>easeCircleIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/circle.js#L1 "Source")
-
-Circular easing.
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/circleIn.png" alt="circleIn">](https://observablehq.com/@d3/easing#circleIn)
-
-<a name="easeCircleOut" href="#easeCircleOut">#</a> d3.<b>easeCircleOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/circle.js#L5 "Source")
-
-Reverse circular easing; equivalent to 1 - [circleIn](#easeCircleIn)(1 - *t*).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/circleOut.png" alt="circleOut">](https://observablehq.com/@d3/easing#circleOut)
-
-<a name="easeCircle" href="#easeCircle">#</a> d3.<b>easeCircle</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/circle.js "Source")
-<br><a name="easeCircleInOut" href="#easeCircleInOut">#</a> d3.<b>easeCircleInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/circle.js#L9 "Source")
-
-Symmetric circular easing; scales [circleIn](#easeCircleIn) for *t* in [0, 0.5] and [circleOut](#easeCircleOut) for *t* in [0.5, 1].
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/circleInOut.png" alt="circleInOut">](https://observablehq.com/@d3/easing#circleInOut)
-
-<a name="easeElasticIn" href="#easeElasticIn">#</a> d3.<b>easeElasticIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/elastic.js#L5 "Source")
-
-Elastic easing, like a rubber band. The [amplitude](#elastic_amplitude) and [period](#elastic_period) of the oscillation are configurable; if not specified, they default to 1 and 0.3, respectively.
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/elasticIn.png" alt="elasticIn">](https://observablehq.com/@d3/easing#elasticIn)
-
-<a name="easeElastic" href="#easeElastic">#</a> d3.<b>easeElastic</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/elastic.js "Source")
-<br><a name="easeElasticOut" href="#easeElasticOut">#</a> d3.<b>easeElasticOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/elastic.js#L18 "Source")
-
-Reverse elastic easing; equivalent to 1 - [elasticIn](#easeElasticIn)(1 - *t*).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/elasticOut.png" alt="elasticOut">](https://observablehq.com/@d3/easing#elasticOut)
-
-<a name="easeElasticInOut" href="#easeElasticInOut">#</a> d3.<b>easeElasticInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/elastic.js#L31 "Source")
-
-Symmetric elastic easing; scales [elasticIn](#easeElasticIn) for *t* in [0, 0.5] and [elasticOut](#easeElasticOut) for *t* in [0.5, 1].
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/elasticInOut.png" alt="elasticInOut">](https://observablehq.com/@d3/easing#elasticInOut)
-
-<a name="elastic_amplitude" href="#elastic_amplitude">#</a> <i>elastic</i>.<b>amplitude</b>(<i>a</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/elastic.js#L40 "Source")
-
-Returns a new elastic easing with the specified amplitude *a*.
-
-<a name="elastic_period" href="#elastic_period">#</a> <i>elastic</i>.<b>period</b>(<i>p</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/elastic.js#L41 "Source")
-
-Returns a new elastic easing with the specified period *p*.
-
-<a name="easeBackIn" href="#easeBackIn">#</a> d3.<b>easeBackIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/back.js#L3 "Source")
-
-[Anticipatory](https://en.wikipedia.org/wiki/12_basic_principles_of_animation#Anticipation) easing, like a dancer bending his knees before jumping off the floor. The degree of [overshoot](#back_overshoot) is configurable; if not specified, it defaults to 1.70158.
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/backIn.png" alt="backIn">](https://observablehq.com/@d3/easing#backIn)
-
-<a name="easeBackOut" href="#easeBackOut">#</a> d3.<b>easeBackOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/back.js#L15 "Source")
-
-Reverse anticipatory easing; equivalent to 1 - [backIn](#easeBackIn)(1 - *t*).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/backOut.png" alt="backOut">](https://observablehq.com/@d3/easing#backOut)
-
-<a name="easeBack" href="#easeBack">#</a> d3.<b>easeBack</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/back.js "Source")
-<br><a name="easeBackInOut" href="#easeBackInOut">#</a> d3.<b>easeBackInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/back.js#L27 "Source")
-
-Symmetric anticipatory easing; scales [backIn](#easeBackIn) for *t* in [0, 0.5] and [backOut](#easeBackOut) for *t* in [0.5, 1].
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/backInOut.png" alt="backInOut">](https://observablehq.com/@d3/easing#backInOut)
-
-<a name="back_overshoot" href="#back_overshoot">#</a> <i>back</i>.<b>overshoot</b>(<i>s</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/back.js#L1 "Source")
-
-Returns a new back easing with the specified overshoot *s*.
-
-<a name="easeBounceIn" href="#easeBounceIn">#</a> d3.<b>easeBounceIn</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/bounce.js#L12 "Source")
-
-Bounce easing, like a rubber ball.
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/bounceIn.png" alt="bounceIn">](https://observablehq.com/@d3/easing#bounceIn)
-
-<a name="easeBounce" href="#easeBounce">#</a> d3.<b>easeBounce</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/bounce.js "Source")
-<br><a name="easeBounceOut" href="#easeBounceOut">#</a> d3.<b>easeBounceOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/bounce.js#L16 "Source")
-
-Reverse bounce easing; equivalent to 1 - [bounceIn](#easeBounceIn)(1 - *t*).
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/bounceOut.png" alt="bounceOut">](https://observablehq.com/@d3/easing#bounceOut)
-
-<a name="easeBounceInOut" href="#easeBounceInOut">#</a> d3.<b>easeBounceInOut</b>(<i>t</i>) [<>](https://github.com/d3/d3-ease/blob/master/src/bounce.js#L20 "Source")
-
-Symmetric bounce easing; scales [bounceIn](#easeBounceIn) for *t* in [0, 0.5] and [bounceOut](#easeBounceOut) for *t* in [0.5, 1].
-
-[<img src="https://raw.githubusercontent.com/d3/d3-ease/master/img/bounceInOut.png" alt="bounceInOut">](https://observablehq.com/@d3/easing#bounceInOut)

package/node_modules/d3-ease/dist/d3-ease.js

@@ -1,264 +0,0 @@
-// https://d3js.org/d3-ease/ v1.0.7 Copyright 2020 Mike Bostock
-(function (global, factory) {
-typeof exports === 'object' && typeof module !== 'undefined' ? factory(exports) :
-typeof define === 'function' && define.amd ? define(['exports'], factory) :
-(global = global || self, factory(global.d3 = global.d3 || {}));
-}(this, function (exports) { 'use strict';
-
-function linear(t) {
-  return +t;
-}
-
-function quadIn(t) {
-  return t * t;
-}
-
-function quadOut(t) {
-  return t * (2 - t);
-}
-
-function quadInOut(t) {
-  return ((t *= 2) <= 1 ? t * t : --t * (2 - t) + 1) / 2;
-}
-
-function cubicIn(t) {
-  return t * t * t;
-}
-
-function cubicOut(t) {
-  return --t * t * t + 1;
-}
-
-function cubicInOut(t) {
-  return ((t *= 2) <= 1 ? t * t * t : (t -= 2) * t * t + 2) / 2;
-}
-
-var exponent = 3;
-
-var polyIn = (function custom(e) {
-  e = +e;
-
-  function polyIn(t) {
-    return Math.pow(t, e);
-  }
-
-  polyIn.exponent = custom;
-
-  return polyIn;
-})(exponent);
-
-var polyOut = (function custom(e) {
-  e = +e;
-
-  function polyOut(t) {
-    return 1 - Math.pow(1 - t, e);
-  }
-
-  polyOut.exponent = custom;
-
-  return polyOut;
-})(exponent);
-
-var polyInOut = (function custom(e) {
-  e = +e;
-
-  function polyInOut(t) {
-    return ((t *= 2) <= 1 ? Math.pow(t, e) : 2 - Math.pow(2 - t, e)) / 2;
-  }
-
-  polyInOut.exponent = custom;
-
-  return polyInOut;
-})(exponent);
-
-var pi = Math.PI,
-    halfPi = pi / 2;
-
-function sinIn(t) {
-  return (+t === 1) ? 1 : 1 - Math.cos(t * halfPi);
-}
-
-function sinOut(t) {
-  return Math.sin(t * halfPi);
-}
-
-function sinInOut(t) {
-  return (1 - Math.cos(pi * t)) / 2;
-}
-
-// tpmt is two power minus ten times t scaled to [0,1]
-function tpmt(x) {
-  return (Math.pow(2, -10 * x) - 0.0009765625) * 1.0009775171065494;
-}
-
-function expIn(t) {
-  return tpmt(1 - +t);
-}
-
-function expOut(t) {
-  return 1 - tpmt(t);
-}
-
-function expInOut(t) {
-  return ((t *= 2) <= 1 ? tpmt(1 - t) : 2 - tpmt(t - 1)) / 2;
-}
-
-function circleIn(t) {
-  return 1 - Math.sqrt(1 - t * t);
-}
-
-function circleOut(t) {
-  return Math.sqrt(1 - --t * t);
-}
-
-function circleInOut(t) {
-  return ((t *= 2) <= 1 ? 1 - Math.sqrt(1 - t * t) : Math.sqrt(1 - (t -= 2) * t) + 1) / 2;
-}
-
-var b1 = 4 / 11,
-    b2 = 6 / 11,
-    b3 = 8 / 11,
-    b4 = 3 / 4,
-    b5 = 9 / 11,
-    b6 = 10 / 11,
-    b7 = 15 / 16,
-    b8 = 21 / 22,
-    b9 = 63 / 64,
-    b0 = 1 / b1 / b1;
-
-function bounceIn(t) {
-  return 1 - bounceOut(1 - t);
-}
-
-function bounceOut(t) {
-  return (t = +t) < b1 ? b0 * t * t : t < b3 ? b0 * (t -= b2) * t + b4 : t < b6 ? b0 * (t -= b5) * t + b7 : b0 * (t -= b8) * t + b9;
-}
-
-function bounceInOut(t) {
-  return ((t *= 2) <= 1 ? 1 - bounceOut(1 - t) : bounceOut(t - 1) + 1) / 2;
-}
-
-var overshoot = 1.70158;
-
-var backIn = (function custom(s) {
-  s = +s;
-
-  function backIn(t) {
-    return (t = +t) * t * (s * (t - 1) + t);
-  }
-
-  backIn.overshoot = custom;
-
-  return backIn;
-})(overshoot);
-
-var backOut = (function custom(s) {
-  s = +s;
-
-  function backOut(t) {
-    return --t * t * ((t + 1) * s + t) + 1;
-  }
-
-  backOut.overshoot = custom;
-
-  return backOut;
-})(overshoot);
-
-var backInOut = (function custom(s) {
-  s = +s;
-
-  function backInOut(t) {
-    return ((t *= 2) < 1 ? t * t * ((s + 1) * t - s) : (t -= 2) * t * ((s + 1) * t + s) + 2) / 2;
-  }
-
-  backInOut.overshoot = custom;
-
-  return backInOut;
-})(overshoot);
-
-var tau = 2 * Math.PI,
-    amplitude = 1,
-    period = 0.3;
-
-var elasticIn = (function custom(a, p) {
-  var s = Math.asin(1 / (a = Math.max(1, a))) * (p /= tau);
-
-  function elasticIn(t) {
-    return a * tpmt(-(--t)) * Math.sin((s - t) / p);
-  }
-
-  elasticIn.amplitude = function(a) { return custom(a, p * tau); };
-  elasticIn.period = function(p) { return custom(a, p); };
-
-  return elasticIn;
-})(amplitude, period);
-
-var elasticOut = (function custom(a, p) {
-  var s = Math.asin(1 / (a = Math.max(1, a))) * (p /= tau);
-
-  function elasticOut(t) {
-    return 1 - a * tpmt(t = +t) * Math.sin((t + s) / p);
-  }
-
-  elasticOut.amplitude = function(a) { return custom(a, p * tau); };
-  elasticOut.period = function(p) { return custom(a, p); };
-
-  return elasticOut;
-})(amplitude, period);
-
-var elasticInOut = (function custom(a, p) {
-  var s = Math.asin(1 / (a = Math.max(1, a))) * (p /= tau);
-
-  function elasticInOut(t) {
-    return ((t = t * 2 - 1) < 0
-        ? a * tpmt(-t) * Math.sin((s - t) / p)
-        : 2 - a * tpmt(t) * Math.sin((s + t) / p)) / 2;
-  }
-
-  elasticInOut.amplitude = function(a) { return custom(a, p * tau); };
-  elasticInOut.period = function(p) { return custom(a, p); };
-
-  return elasticInOut;
-})(amplitude, period);
-
-exports.easeBack = backInOut;
-exports.easeBackIn = backIn;
-exports.easeBackInOut = backInOut;
-exports.easeBackOut = backOut;
-exports.easeBounce = bounceOut;
-exports.easeBounceIn = bounceIn;
-exports.easeBounceInOut = bounceInOut;
-exports.easeBounceOut = bounceOut;
-exports.easeCircle = circleInOut;
-exports.easeCircleIn = circleIn;
-exports.easeCircleInOut = circleInOut;
-exports.easeCircleOut = circleOut;
-exports.easeCubic = cubicInOut;
-exports.easeCubicIn = cubicIn;
-exports.easeCubicInOut = cubicInOut;
-exports.easeCubicOut = cubicOut;
-exports.easeElastic = elasticOut;
-exports.easeElasticIn = elasticIn;
-exports.easeElasticInOut = elasticInOut;
-exports.easeElasticOut = elasticOut;
-exports.easeExp = expInOut;
-exports.easeExpIn = expIn;
-exports.easeExpInOut = expInOut;
-exports.easeExpOut = expOut;
-exports.easeLinear = linear;
-exports.easePoly = polyInOut;
-exports.easePolyIn = polyIn;
-exports.easePolyInOut = polyInOut;
-exports.easePolyOut = polyOut;
-exports.easeQuad = quadInOut;
-exports.easeQuadIn = quadIn;
-exports.easeQuadInOut = quadInOut;
-exports.easeQuadOut = quadOut;
-exports.easeSin = sinInOut;
-exports.easeSinIn = sinIn;
-exports.easeSinInOut = sinInOut;
-exports.easeSinOut = sinOut;
-
-Object.defineProperty(exports, '__esModule', { value: true });
-
-}));

package/node_modules/d3-ease/dist/d3-ease.min.js

@@ -1,2 +0,0 @@
-// https://d3js.org/d3-ease/ v1.0.7 Copyright 2020 Mike Bostock
-!function(n,e){"object"==typeof exports&&"undefined"!=typeof module?e(exports):"function"==typeof define&&define.amd?define(["exports"],e):e((n=n||self).d3=n.d3||{})}(this,function(n){"use strict";function e(n){return((n*=2)<=1?n*n:--n*(2-n)+1)/2}function t(n){return((n*=2)<=1?n*n*n:(n-=2)*n*n+2)/2}var u=function n(e){function t(n){return Math.pow(n,e)}return e=+e,t.exponent=n,t}(3),r=function n(e){function t(n){return 1-Math.pow(1-n,e)}return e=+e,t.exponent=n,t}(3),a=function n(e){function t(n){return((n*=2)<=1?Math.pow(n,e):2-Math.pow(2-n,e))/2}return e=+e,t.exponent=n,t}(3),o=Math.PI,i=o/2;function c(n){return(1-Math.cos(o*n))/2}function s(n){return 1.0009775171065494*(Math.pow(2,-10*n)-.0009765625)}function f(n){return((n*=2)<=1?s(1-n):2-s(n-1))/2}function h(n){return((n*=2)<=1?1-Math.sqrt(1-n*n):Math.sqrt(1-(n-=2)*n)+1)/2}var p=4/11,M=6/11,d=8/11,I=.75,l=9/11,O=10/11,x=.9375,v=21/22,m=63/64,y=1/p/p;function B(n){return(n=+n)<p?y*n*n:n<d?y*(n-=M)*n+I:n<O?y*(n-=l)*n+x:y*(n-=v)*n+m}var C=function n(e){function t(n){return(n=+n)*n*(e*(n-1)+n)}return e=+e,t.overshoot=n,t}(1.70158),E=function n(e){function t(n){return--n*n*((n+1)*e+n)+1}return e=+e,t.overshoot=n,t}(1.70158),P=function n(e){function t(n){return((n*=2)<1?n*n*((e+1)*n-e):(n-=2)*n*((e+1)*n+e)+2)/2}return e=+e,t.overshoot=n,t}(1.70158),b=2*Math.PI,w=function n(e,t){var u=Math.asin(1/(e=Math.max(1,e)))*(t/=b);function r(n){return e*s(- --n)*Math.sin((u-n)/t)}return r.amplitude=function(e){return n(e,t*b)},r.period=function(t){return n(e,t)},r}(1,.3),k=function n(e,t){var u=Math.asin(1/(e=Math.max(1,e)))*(t/=b);function r(n){return 1-e*s(n=+n)*Math.sin((n+u)/t)}return r.amplitude=function(e){return n(e,t*b)},r.period=function(t){return n(e,t)},r}(1,.3),q=function n(e,t){var u=Math.asin(1/(e=Math.max(1,e)))*(t/=b);function r(n){return((n=2*n-1)<0?e*s(-n)*Math.sin((u-n)/t):2-e*s(n)*Math.sin((u+n)/t))/2}return r.amplitude=function(e){return n(e,t*b)},r.period=function(t){return n(e,t)},r}(1,.3);n.easeBack=P,n.easeBackIn=C,n.easeBackInOut=P,n.easeBackOut=E,n.easeBounce=B,n.easeBounceIn=function(n){return 1-B(1-n)},n.easeBounceInOut=function(n){return((n*=2)<=1?1-B(1-n):B(n-1)+1)/2},n.easeBounceOut=B,n.easeCircle=h,n.easeCircleIn=function(n){return 1-Math.sqrt(1-n*n)},n.easeCircleInOut=h,n.easeCircleOut=function(n){return Math.sqrt(1- --n*n)},n.easeCubic=t,n.easeCubicIn=function(n){return n*n*n},n.easeCubicInOut=t,n.easeCubicOut=function(n){return--n*n*n+1},n.easeElastic=k,n.easeElasticIn=w,n.easeElasticInOut=q,n.easeElasticOut=k,n.easeExp=f,n.easeExpIn=function(n){return s(1-+n)},n.easeExpInOut=f,n.easeExpOut=function(n){return 1-s(n)},n.easeLinear=function(n){return+n},n.easePoly=a,n.easePolyIn=u,n.easePolyInOut=a,n.easePolyOut=r,n.easeQuad=e,n.easeQuadIn=function(n){return n*n},n.easeQuadInOut=e,n.easeQuadOut=function(n){return n*(2-n)},n.easeSin=c,n.easeSinIn=function(n){return 1==+n?1:1-Math.cos(n*i)},n.easeSinInOut=c,n.easeSinOut=function(n){return Math.sin(n*i)},Object.defineProperty(n,"__esModule",{value:!0})});

package/node_modules/d3-ease/package.json

@@ -1,76 +0,0 @@
-{
-  "_args": [
-    [
-      "d3-ease@1.0.7",
-      "/Users/haydenbleasel/GitHub/corellium-cli"
-    ]
-  ],
-  "_from": "d3-ease@1.0.7",
-  "_id": "d3-ease@1.0.7",
-  "_inBundle": false,
-  "_integrity": "sha512-lx14ZPYkhNx0s/2HX5sLFUI3mbasHjSSpwO/KaaNACweVwxUruKyWVcb293wMv1RqTPZyZ8kSZ2NogUZNcLOFQ==",
-  "_location": "/d3-ease",
-  "_phantomChildren": {},
-  "_requested": {
-    "type": "version",
-    "registry": true,
-    "raw": "d3-ease@1.0.7",
-    "name": "d3-ease",
-    "escapedName": "d3-ease",
-    "rawSpec": "1.0.7",
-    "saveSpec": null,
-    "fetchSpec": "1.0.7"
-  },
-  "_requiredBy": [
-    "/d3",
-    "/d3-transition"
-  ],
-  "_resolved": "https://registry.npmjs.org/d3-ease/-/d3-ease-1.0.7.tgz",
-  "_spec": "1.0.7",
-  "_where": "/Users/haydenbleasel/GitHub/corellium-cli",
-  "author": {
-    "name": "Mike Bostock",
-    "url": "http://bost.ocks.org/mike"
-  },
-  "bugs": {
-    "url": "https://github.com/d3/d3-ease/issues"
-  },
-  "description": "Easing functions for smooth animation.",
-  "devDependencies": {
-    "eslint": "6",
-    "rollup": "1",
-    "rollup-plugin-terser": "5",
-    "tape": "4"
-  },
-  "files": [
-    "dist/**/*.js",
-    "src/**/*.js"
-  ],
-  "homepage": "https://d3js.org/d3-ease/",
-  "jsdelivr": "dist/d3-ease.min.js",
-  "keywords": [
-    "d3",
-    "d3-module",
-    "ease",
-    "easing",
-    "animation",
-    "transition"
-  ],
-  "license": "BSD-3-Clause",
-  "main": "dist/d3-ease.js",
-  "module": "src/index.js",
-  "name": "d3-ease",
-  "repository": {
-    "type": "git",
-    "url": "git+https://github.com/d3/d3-ease.git"
-  },
-  "scripts": {
-    "postpublish": "git push && git push --tags && cd ../d3.github.com && git pull && cp ../${npm_package_name}/dist/${npm_package_name}.js ${npm_package_name}.v${npm_package_version%%.*}.js && cp ../${npm_package_name}/dist/${npm_package_name}.min.js ${npm_package_name}.v${npm_package_version%%.*}.min.js && git add ${npm_package_name}.v${npm_package_version%%.*}.js ${npm_package_name}.v${npm_package_version%%.*}.min.js && git commit -m \"${npm_package_name} ${npm_package_version}\" && git push && cd - && zip -j dist/${npm_package_name}.zip -- LICENSE README.md dist/${npm_package_name}.js dist/${npm_package_name}.min.js",
-    "prepublishOnly": "rm -rf dist && yarn test",
-    "pretest": "rollup -c",
-    "test": "tape 'test/**/*-test.js' && eslint src test"
-  },
-  "sideEffects": false,
-  "unpkg": "dist/d3-ease.min.js",
-  "version": "1.0.7"
-}

package/node_modules/d3-ease/src/back.js

@@ -1,37 +0,0 @@
-var overshoot = 1.70158;
-
-export var backIn = (function custom(s) {
-  s = +s;
-
-  function backIn(t) {
-    return (t = +t) * t * (s * (t - 1) + t);
-  }
-
-  backIn.overshoot = custom;
-
-  return backIn;
-})(overshoot);
-
-export var backOut = (function custom(s) {
-  s = +s;
-
-  function backOut(t) {
-    return --t * t * ((t + 1) * s + t) + 1;
-  }
-
-  backOut.overshoot = custom;
-
-  return backOut;
-})(overshoot);
-
-export var backInOut = (function custom(s) {
-  s = +s;
-
-  function backInOut(t) {
-    return ((t *= 2) < 1 ? t * t * ((s + 1) * t - s) : (t -= 2) * t * ((s + 1) * t + s) + 2) / 2;
-  }
-
-  backInOut.overshoot = custom;
-
-  return backInOut;
-})(overshoot);