@coinbase/cdp-api-client 0.0.110 → 0.0.112

package/dist/types/index.d.ts

@@ -158,6 +158,25 @@ export declare type BadGatewayErrorResponse = Error_2;
  */
 export declare type BlockchainAddress = string;
 
+/**
+ * The name of a capability. Capabilities represent granular functional permissions
+ that determine what actions a customer can perform. Each capability must be
+ explicitly requested before use.
+
+ */
+export declare type CapabilityName = (typeof CapabilityName)[keyof typeof CapabilityName];
+
+export declare const CapabilityName: {
+    readonly custodyCrypto: "custodyCrypto";
+    readonly custodyFiat: "custodyFiat";
+    readonly custodyStablecoin: "custodyStablecoin";
+    readonly tradeCrypto: "tradeCrypto";
+    readonly tradeStablecoin: "tradeStablecoin";
+    readonly transferCrypto: "transferCrypto";
+    readonly transferFiat: "transferFiat";
+    readonly transferStablecoin: "transferStablecoin";
+};
+
 /**
  * Mutates the given Axios request configuration to add the CDP API key signature
  * to the request headers.
@@ -738,6 +757,13 @@ export declare interface EIP712Types {
     [key: string]: unknown;
 }
 
+/**
+ * An email address. Maximum length 254 characters per [RFC 5321](https://www.rfc-editor.org/rfc/rfc5321).
+ * @maxLength 254
+ * @pattern ^[a-zA-Z0-9.!#$%&'*+/=?^_`{|}/-]+@[a-zA-Z0-9-]+(?:\.[a-zA-Z0-9-]+)*$
+ */
+export declare type Email = string;
+
 /**
  * Information about an end user who authenticates using a one-time password sent to their email address.
  */
@@ -745,7 +771,7 @@ export declare interface EmailAuthentication {
     /** The type of authentication information. */
     type: EmailAuthenticationType;
     /** The email address of the end user. */
-    email: string;
+    email: Email;
 }
 
 /**
@@ -1050,6 +1076,16 @@ declare interface Error_2 {
     correlationId?: string;
     /** A link to the corresponding error documentation. */
     errorLink?: Url;
+    /** The capability code(s) that were not authorized for the customer on
+     this request. Present only when `errorType` is
+     `customer_not_authorized`; absent for every other error type.
+
+     Use this list to render onboarding UX for the listed capabilities, or
+     fetch `GET /v2/customers/{customerId}` and inspect each entry's
+     `status` / `requirements` to discover what (if anything) can be
+     submitted to resolve the block.
+     */
+    unauthorizedCapabilities?: CapabilityName[];
 }
 export { Error_2 as Error }
 
@@ -1064,6 +1100,7 @@ export declare const ErrorType: {
     readonly bad_gateway: "bad_gateway";
     readonly capture_expired: "capture_expired";
     readonly client_closed_request: "client_closed_request";
+    readonly customer_not_authorized: "customer_not_authorized";
     readonly endpoint_unavailable: "endpoint_unavailable";
     readonly faucet_limit_exceeded: "faucet_limit_exceeded";
     readonly forbidden: "forbidden";
@@ -1092,6 +1129,12 @@ export declare const ErrorType: {
     readonly guest_transaction_limit: "guest_transaction_limit";
     readonly guest_transaction_count: "guest_transaction_count";
     readonly phone_number_verification_expired: "phone_number_verification_expired";
+    readonly otp_verification_code_invalid: "otp_verification_code_invalid";
+    readonly otp_verification_destination_mismatch: "otp_verification_destination_mismatch";
+    readonly otp_verification_expired: "otp_verification_expired";
+    readonly otp_verification_invalid: "otp_verification_invalid";
+    readonly otp_verification_not_found: "otp_verification_not_found";
+    readonly otp_verification_required: "otp_verification_required";
     readonly document_verification_failed: "document_verification_failed";
     readonly recipient_allowlist_violation: "recipient_allowlist_violation";
     readonly recipient_allowlist_pending: "recipient_allowlist_pending";
@@ -1133,6 +1176,17 @@ export declare const ErrorType: {
     readonly delegation_not_enabled: "delegation_not_enabled";
     readonly network_mismatch: "network_mismatch";
     readonly already_enabled: "already_enabled";
+    readonly payment_session_already_canceled: "payment_session_already_canceled";
+    readonly payment_session_already_authorized: "payment_session_already_authorized";
+    readonly payment_session_action_pending: "payment_session_action_pending";
+    readonly no_capturable_balance: "no_capturable_balance";
+    readonly no_voidable_balance: "no_voidable_balance";
+    readonly no_refundable_balance: "no_refundable_balance";
+    readonly entity_not_configured_for_payment_acceptance: "entity_not_configured_for_payment_acceptance";
+    readonly daily_transaction_limit_exceeded: "daily_transaction_limit_exceeded";
+    readonly daily_amount_limit_exceeded: "daily_amount_limit_exceeded";
+    readonly stale_attestation: "stale_attestation";
+    readonly moderation_rejected: "moderation_rejected";
 };
 
 export declare interface EvmCall {
@@ -1732,11 +1786,8 @@ export declare const InitiateEmailAuthenticationNextStepType: {
 export declare interface InitiateEmailAuthenticationRequest {
     /** The type of authentication information. */
     type: InitiateEmailAuthenticationRequestType;
-    /**
-     * The email address of the end user. Maximum length is 254 characters as defined by [RFC5321](https://www.rfc-editor.org/rfc/rfc5321).
-     * @maxLength 254
-     */
-    email: string;
+    /** The email address of the end user. Maximum length is 254 characters as defined by [RFC5321](https://www.rfc-editor.org/rfc/rfc5321). */
+    email: Email;
 }
 
 /**
@@ -1847,8 +1898,17 @@ export declare interface InitiateOAuthAuthenticationRequest {
     type: OAuth2ProviderType;
     /** The url of the developer's application where the flow should redirect. */
     redirectUrl: Uri;
+    /** Optional key-value pairs to append or override non-critical query parameters on the OAuth authorization URL. For example, use `prompt` to control consent behavior, `login_hint` to pre-fill the user's email on Google, or `email` for Apple. Parameters critical to the OAuth/OIDC protocol (such as `client_id`, `redirect_uri`, `response_type`, `scope`, `state`, `code_challenge`, `code_challenge_method`, and `response_mode`) cannot be overridden and will result in a 400 error. */
+    providerUrlParams?: InitiateOAuthAuthenticationRequestProviderUrlParams;
 }
 
+/**
+ * Optional key-value pairs to append or override non-critical query parameters on the OAuth authorization URL. For example, use `prompt` to control consent behavior, `login_hint` to pre-fill the user's email on Google, or `email` for Apple. Parameters critical to the OAuth/OIDC protocol (such as `client_id`, `redirect_uri`, `response_type`, `scope`, `state`, `code_challenge`, `code_challenge_method`, and `response_mode`) cannot be overridden and will result in a 400 error.
+ */
+export declare type InitiateOAuthAuthenticationRequestProviderUrlParams = {
+    [key: string]: string;
+};
+
 /**
  * The response body for an end user to initiate OAuth authentication using a third-party provider.
  */
@@ -1927,11 +1987,8 @@ export declare const InitiateSmsAuthenticationNextStepType: {
 export declare interface InitiateSmsAuthenticationRequest {
     /** The type of authentication information. */
     type: InitiateSmsAuthenticationRequestType;
-    /**
-     * The phone number of the end user in E.164 format.
-     * @pattern ^\+[1-9]\d{1,14}$
-     */
-    phoneNumber: string;
+    /** Phone number in [E.164](https://en.wikipedia.org/wiki/E.164) format. */
+    phoneNumber: PhoneNumber;
 }
 
 /**
@@ -1960,11 +2017,8 @@ export declare interface InitiateSmsAuthenticationResponse {
 export declare interface InitiateSmsMfaEnrollment {
     /** The type of MFA method. */
     type: InitiateSmsMfaEnrollmentType;
-    /**
-     * Phone number in E.164 format (e.g., +14155552671). You can use any phone number for SMS MFA, even if it differs from your SMS authentication phone number.
-     * @pattern ^\+[1-9]\d{1,14}$
-     */
-    phoneNumber?: string;
+    /** Phone number in E.164 format (e.g., +14155552671). You can use any phone number for SMS MFA, even if it differs from your SMS authentication phone number. */
+    phoneNumber?: PhoneNumber;
 }
 
 /**
@@ -2246,6 +2300,13 @@ export declare interface OAuth2Authentication {
     username?: string;
 }
 
+/**
+ * Generated by orval v7.20.0 🍺
+ * Do not edit manually.
+ * Coinbase Developer Platform APIs
+ * The Coinbase Developer Platform APIs - leading the world's transition onchain.
+ * OpenAPI spec version: 2.0.0
+ */
 /**
  * The type of OAuth2 provider.
  */
@@ -2259,6 +2320,29 @@ export declare const OAuth2ProviderType: {
     readonly github: "github";
 };
 
+/**
+ * The OTP email logo for a project.
+ */
+export declare interface OtpEmailLogo {
+    /** The unique identifier of the logo asset. */
+    logoId: string;
+    /** The public URL for the logo image. */
+    logoUrl?: Url;
+    /** The moderation status of the logo. If pending, poll getProjectConfig until the status resolves to approved or rejected. If rejected, upload a new image. */
+    moderationStatus: OtpEmailLogoModerationStatus;
+}
+
+/**
+ * The moderation status of the logo. If pending, poll getProjectConfig until the status resolves to approved or rejected. If rejected, upload a new image.
+ */
+export declare type OtpEmailLogoModerationStatus = (typeof OtpEmailLogoModerationStatus)[keyof typeof OtpEmailLogoModerationStatus];
+
+export declare const OtpEmailLogoModerationStatus: {
+    readonly approved: "approved";
+    readonly pending: "pending";
+    readonly rejected: "rejected";
+};
+
 /**
  * The number of resources to return per page.
  */
@@ -2269,11 +2353,24 @@ export declare type PageSizeParameter = number;
  */
 export declare type PageTokenParameter = string;
 
+/**
+ * The ERC-7677 `context` object forwarded to the paymaster service as part of the `paymasterService` capability. The fields in this object are defined by the paymaster service provider; CDP forwards them to the paymaster unchanged. This field is only valid when a paymaster is configured for the request. Providing `paymasterContext` without a paymaster configured results in an `invalid_request` error.
+ */
+export declare interface PaymasterContext {
+    [key: string]: unknown;
+}
+
 /**
  * A payment method is required to complete this operation.
  */
 export declare type PaymentMethodRequiredErrorResponse = Error_2;
 
+/**
+ * A phone number in [E.164](https://en.wikipedia.org/wiki/E.164) format.
+ * @pattern ^\+[1-9]\d{1,14}$
+ */
+export declare type PhoneNumber = string;
+
 /**
  * Configuration for a project.
  */
@@ -2292,15 +2389,10 @@ export declare interface ProjectConfig {
     /** Whether delegated signing is enabled for this project. When enabled, end users can delegate transaction signing to the project. */
     delegatedSigningEnabled?: boolean;
     appAttestation?: AppAttestationProjectConfig;
+    /** The project's OTP email logo. */
+    logo?: OtpEmailLogo;
 }
 
-/**
- * Generated by orval v7.20.0 🍺
- * Do not edit manually.
- * Coinbase Developer Platform APIs
- * The Coinbase Developer Platform APIs - leading the world's transition onchain.
- * OpenAPI spec version: 2.0.0
- */
 /**
  * The ID of the Project, a UUID v4.
  * @pattern ^[0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$
@@ -2312,6 +2404,70 @@ export declare type ProjectId = string;
  */
 export declare type ProjectIDOptionalParameter = string;
 
+/**
+ * Receives the OAuth callback from an identity provider. This endpoint is intended only for use as a callback URL during OAuth2 provider flows and should not be called directly by client applications. This is an unauthenticated endpoint.
+ * @summary Receive OAuth callback from identity provider
+ */
+export declare const receiveOAuthCallback: (providerType: OAuth2ProviderType, params?: ReceiveOAuthCallbackParams, options?: SecondParameter<typeof cdpApiClient<unknown>>) => Promise<unknown>;
+
+export declare type ReceiveOAuthCallbackParams = {
+    /**
+     * The authorization code returned by the OAuth provider.
+     */
+    code?: string;
+    /**
+     * The OAuth scopes requested from provider.
+     */
+    scope?: string;
+    /**
+     * The base64 encoded state parameter that was sent in the original authorization request.
+     */
+    state?: string;
+    /**
+     * The "error" query param returned from OAuth2 redirection.
+     */
+    error?: string;
+    /**
+     * Human-readable description of the error.
+     */
+    error_description?: string;
+};
+
+/**
+ * Receives the OAuth callback from an identity provider. This endpoint is intended only for use as a callback URL during OAuth2 provider flows and should not be called directly by client applications. This is an unauthenticated endpoint.
+ * @summary Receive OAuth callback from identity provider
+ */
+export declare const receiveOAuthCallbackPost: (providerType: OAuth2ProviderType, receiveOAuthCallbackPostBody: ReceiveOAuthCallbackPostBody, options?: SecondParameter<typeof cdpApiClient<unknown>>) => Promise<unknown>;
+
+export declare type ReceiveOAuthCallbackPostBody = {
+    /**
+     * The authorization code returned by the OAuth provider.
+     * @nullable
+     */
+    code?: string | null;
+    /**
+     * The OAuth scopes requested from provider.
+     * @nullable
+     */
+    scope?: string | null;
+    /** The base64 encoded state parameter that was sent in the original authorization request. */
+    state?: string;
+    /**
+     * The "error" query param returned from OAuth2 redirection.
+     * @nullable
+     */
+    error?: string | null;
+    /**
+     * Human-readable description of the error.
+     * @nullable
+     */
+    error_description?: string | null;
+};
+
+export declare type ReceiveOAuthCallbackPostResult = NonNullable<Awaited<ReturnType<typeof receiveOAuthCallbackPost>>>;
+
+export declare type ReceiveOAuthCallbackResult = NonNullable<Awaited<ReturnType<typeof receiveOAuthCallback>>>;
+
 /**
  * Records that the end user was prompted for MFA enrollment. This endpoint sets the enrollmentPromptedAt timestamp to the current time, allowing tracking of whether users have been shown the enrollment prompt, regardless of whether they chose to enroll or skip.
  * @summary Record MFA enrollment prompt
@@ -2428,7 +2584,7 @@ export declare const registerAttestation: (projectId: ProjectId, iosAttestationR
 export declare type RegisterAttestationResult = NonNullable<Awaited<ReturnType<typeof registerAttestation>>>;
 
 /**
- * Registers a Temporary Wallet Secret for a given end user. This secret is generated on the client-side by the end user's device/browser, typically with the CDP Embedded Wallet SDK, and is used to authenticate requests related to signing.
+ * Registers a Temporary Wallet Secret for a given end user. This secret is generated on the client-side by the end user's device/browser, typically with the CDP User Wallet SDK, and is used to authenticate requests related to signing.
 
 
  Temporary Wallet Secrets expire according to the provided TTL. A maximum of 5 Temporary Wallet Secrets can be registered at a given time for a specific end user. If the end user has more than 5 Temporary Wallet Secrets, the oldest one will be deleted to make space for the new one.
@@ -2633,6 +2789,7 @@ export declare type SendEvmAssetWithEndUserAccountBody = {
     useCdpPaymaster?: boolean;
     /** Optional custom Paymaster URL to use for gas sponsorship. Only applicable for EVM Smart Accounts. This allows you to use your own Paymaster service instead of CDP's Paymaster. Cannot be used together with `useCdpPaymaster`. */
     paymasterUrl?: Url;
+    paymasterContext?: PaymasterContext;
     /**
      * Required when not using delegated signing. The ID of the Temporary Wallet Secret that was used to sign the X-Wallet-Auth Header.
      * @pattern ^[a-zA-Z0-9-]{1,100}$
@@ -2886,6 +3043,7 @@ export declare type SendUserOperationWithEndUserAccountBody = {
     useCdpPaymaster: boolean;
     /** The URL of the paymaster to use for the user operation. If using the CDP Paymaster, use the `useCdpPaymaster` option. */
     paymasterUrl?: Url;
+    paymasterContext?: PaymasterContext;
     /**
      * Required when not using delegated signing. The ID of the Temporary Wallet Secret that was used to sign the X-Wallet-Auth Header.
      * @pattern ^[a-zA-Z0-9-]{1,100}$
@@ -3286,11 +3444,8 @@ export declare const SiweAuthenticationType: {
 export declare interface SmsAuthentication {
     /** The type of authentication information. */
     type: SmsAuthenticationType;
-    /**
-     * The phone number of the end user in E.164 format.
-     * @pattern ^\+[1-9]\d{1,14}$
-     */
-    phoneNumber: string;
+    /** Phone number in [E.164](https://en.wikipedia.org/wiki/E.164) format. */
+    phoneNumber: PhoneNumber;
 }
 
 /**
@@ -3556,7 +3711,7 @@ export declare interface UserOperationReceiptRevert {
 }
 
 /**
- * Verifies the end user's email address using a one-time password. This is an optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the Embedded Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
+ * Verifies the end user's email address using a one-time password. This is an optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the User Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
  * @summary Verify end user email address
  */
 export declare const verifyEmailAuthentication: (projectId: ProjectId, verifyEmailAuthenticationRequest: VerifyEmailAuthenticationRequest, options?: SecondParameter<typeof cdpApiClient<VerifyEmailAuthentication200>>) => Promise<VerifyEmailAuthentication200>;
@@ -3567,7 +3722,7 @@ export declare type VerifyEmailAuthentication200 = {
     isNewEndUser: boolean;
     /** The message to display to the end user. */
     message: string;
-    /** The access token for the end user. This token should be used in subsequent requests to the Embedded Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
+    /** The access token for the end user. This token should be used in subsequent requests to the User Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
     accessToken: string;
     /** The date and time until which the access token is valid, in ISO 8601 format. */
     validUntil: string;
@@ -3600,7 +3755,7 @@ export declare interface VerifyOAuthAppleNativeRequest {
 }
 
 /**
- * Verifies the end user's OAuth code. This is optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the Embedded Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
+ * Verifies the end user's OAuth code. This is optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the User Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
  * @summary Verify end user OAuth code
  */
 export declare const verifyOAuthCode: (projectId: ProjectId, providerType: OAuth2ProviderType, verifyOAuthCodeRequest: VerifyOAuthCodeRequest, options?: SecondParameter<typeof cdpApiClient<VerifyOAuthCode200>>) => Promise<VerifyOAuthCode200>;
@@ -3611,7 +3766,7 @@ export declare type VerifyOAuthCode200 = {
     isNewEndUser: boolean;
     /** The message to display to the end user. */
     message: string;
-    /** The access token for the end user. This token should be used in subsequent requests to the Embedded Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
+    /** The access token for the end user. This token should be used in subsequent requests to the User Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
     accessToken: string;
     /** The date and time until which the access token is valid, in ISO 8601 format. */
     validUntil: string;
@@ -3637,7 +3792,7 @@ export declare type VerifyOAuthCodeResult = NonNullable<Awaited<ReturnType<typeo
 export declare type VerifyOAuthEndUserIdentity = VerifyOAuthTelegramRequest | VerifyOAuthAppleNativeRequest;
 
 /**
- * Verifies the end user's identity using data from a third-party provider like Telegram or Apple native sign-in that does not support code-based OAuth flows and only provides user data to flows initiated on a bot's domain. This is optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the Embedded Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
+ * Verifies the end user's identity using data from a third-party provider like Telegram or Apple native sign-in that does not support code-based OAuth flows and only provides user data to flows initiated on a bot's domain. This is optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the User Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
  * @summary Verify third-party end user identity
  */
 export declare const verifyOAuthEndUserIdentity: (projectId: ProjectId, providerType: OAuth2ProviderType, verifyOAuthEndUserIdentity: VerifyOAuthEndUserIdentity, options?: SecondParameter<typeof cdpApiClient<VerifyOAuthEndUserIdentity200>>) => Promise<VerifyOAuthEndUserIdentity200>;
@@ -3648,7 +3803,7 @@ export declare type VerifyOAuthEndUserIdentity200 = {
     isNewEndUser: boolean;
     /** The message to display to the end user. */
     message: string;
-    /** The access token for the end user. This token should be used in subsequent requests to the Embedded Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
+    /** The access token for the end user. This token should be used in subsequent requests to the User Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
     accessToken: string;
     /** The date and time until which the access token is valid, in ISO 8601 format. */
     validUntil: string;
@@ -3681,7 +3836,7 @@ export declare interface VerifyOAuthTelegramRequest {
 }
 
 /**
- * Verifies the end user's Sign In With Ethereum (EIP-4361) signature. This is an optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the Embedded Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
+ * Verifies the end user's Sign In With Ethereum (EIP-4361) signature. This is an optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the User Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
  * @summary Verify end user SIWE signature
  */
 export declare const verifySiweAuthentication: (projectId: ProjectId, verifySiweAuthenticationRequest: VerifySiweAuthenticationRequest, options?: SecondParameter<typeof cdpApiClient<VerifySiweAuthentication200>>) => Promise<VerifySiweAuthentication200>;
@@ -3692,7 +3847,7 @@ export declare type VerifySiweAuthentication200 = {
     isNewEndUser: boolean;
     /** The message to display to the end user. */
     message: string;
-    /** The access token for the end user. This token should be used in subsequent requests to the Embedded Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
+    /** The access token for the end user. This token should be used in subsequent requests to the User Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
     accessToken: string;
     /** The date and time until which the access token is valid, in ISO 8601 format. */
     validUntil: string;
@@ -3713,7 +3868,7 @@ export declare interface VerifySiweAuthenticationRequest {
 export declare type VerifySiweAuthenticationResult = NonNullable<Awaited<ReturnType<typeof verifySiweAuthentication>>>;
 
 /**
- * Verifies the end user's phone number using a one-time password sent via SMS. This is an optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the Embedded Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
+ * Verifies the end user's phone number using a one-time password sent via SMS. This is an optionally authenticated endpoint. The API returns an access token that can be used to authenticate subsequent requests to the User Wallet APIs, as well as a refresh token set in the `Set-Cookie` header for non-WebKit user agents, otherwise returned in the response body. If a valid access token is included in the Authorization header, the authentication method is added to the existing user associated with the token. If the authentication method already exists, an error is returned.
  * @summary Verify end user phone number
  */
 export declare const verifySmsAuthentication: (projectId: ProjectId, verifySmsAuthenticationRequest: VerifySmsAuthenticationRequest, options?: SecondParameter<typeof cdpApiClient<VerifySmsAuthentication200>>) => Promise<VerifySmsAuthentication200>;
@@ -3724,7 +3879,7 @@ export declare type VerifySmsAuthentication200 = {
     isNewEndUser: boolean;
     /** The message to display to the end user. */
     message: string;
-    /** The access token for the end user. This token should be used in subsequent requests to the Embedded Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
+    /** The access token for the end user. This token should be used in subsequent requests to the User Wallet APIs by specifing 'Bearer' as the prefix of the `Authorization` header. */
     accessToken: string;
     /** The date and time until which the access token is valid, in ISO 8601 format. */
     validUntil: string;

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@coinbase/cdp-api-client",
-  "version": "0.0.110",
+  "version": "0.0.112",
   "type": "module",
   "files": [
     "dist/**",