@codingame/monaco-editor-wrapper 3.10.0-monaco-update.1 → 4.0.0-monaco-update.1

package/dist/assets/{ms-vscode.cpptools-1.18.0.vsix/package.nls.pl-fac1f880.json → ms-vscode.cpptools-1.19.2.vsix/package.nls.pl.json}

@@ -12,7 +12,7 @@
 	"c_cpp.command.configurationEditJSON.title": "Edytowanie konfiguracji (JSON)",
 	"c_cpp.command.configurationEditUI.title": "Edytowanie konfiguracji (interfejs użytkownika)",
 	"c_cpp.command.selectIntelliSenseConfiguration.title": "Wybierz konfigurację funkcji IntelliSense...",
-	"c_cpp.command.installCompiler.title": "Install a C++ Compiler",
+	"c_cpp.command.installCompiler.title": "Zainstaluj kompilator języka C++",
 	"c_cpp.command.rescanCompilers.title": "Ponownie zeskanuj w poszukiwaniu kompilatorów",
 	"c_cpp.command.switchHeaderSource.title": "Przełączanie nagłówka/źródła",
 	"c_cpp.command.enableErrorSquiggles.title": "Włączanie zygzaków sygnalizujących błędy",
@@ -411,9 +411,9 @@
 	"c_cpp.walkthrough.description": "Poznaj zaawansowane środowisko deweloperskie języka C++ w edytorze VS Code.",
 	"c_cpp.walkthrough.set.up.title": "Konfigurowanie środowiska C++",
 	"c_cpp.walkthrough.activating.description": "Aktywowanie rozszerzenia języka C++ w celu określenia, czy środowisko C++ zostało skonfigurowane.\nTrwa aktywowanie rozszerzenia...",
-	"c_cpp.walkthrough.no.compilers.windows.description": "We could not find a C++ compiler on your machine, which is required to use the C++ extension. Follow the instructions on the right to install one, then click “Find my new Compiler” below.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
-	"c_cpp.walkthrough.no.compilers.description": "Nie można odnaleźć na maszynie kompilatora języka C++, który jest wymagany, aby korzystać z rozszerzenia języka C++. Postępuj zgodnie z instrukcjami po prawej stronie, aby zainstalować, a następnie kliknij poniżej pozycję „Znajdź mój nowy kompilator”.\n[Znajdź mój nowy kompilator](command:C_Cpp.RescanCompilers?%7B%22sender%22%3A%22walkthrough%22%7D",
-	"c_cpp.walkthrough.compilers.found.description": "Rozszerzenie języka C++ działa z kompilatorem języka C++. Wybierz jeden z tych, które są już na Twojej maszynie, klikając poniższy przycisk.\n[Wybierz domyślny kompilator](command:C_Cpp.SelectDefaultCompiler?%7B%22sender%22%3A%22walkthrough%22%7D)",
+	"c_cpp.walkthrough.no.compilers.windows.description": "Nie można odnaleźć kompilatora języka C++ na Twojej maszynie, który jest wymagany do korzystania z rozszerzenia języka C++. Postępuj zgodnie z instrukcjami po prawej stronie, aby go zainstalować, a następnie kliknij poniżej pozycję „Znajdź mój nowy kompilator”.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.no.compilers.description": "Nie można odnaleźć kompilatora języka C++ na Twojej maszynie, który jest wymagany do korzystania z rozszerzenia języka C++. Wybierz „Zainstaluj kompilator języka C++”, aby zainstalować kompilator lub postępuj zgodnie z instrukcjami po prawej stronie, aby go zainstalować, a następnie kliknij „Znajdź mój nowy kompilator” poniżej.\n[Install a C++ Compiler](command:C_Cpp.InstallCompiler?%22walkthrough%22)\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.compilers.found.description": "Rozszerzenie języka C++ działa z kompilatorem języka C++. Wybierz jedną z tych, które są już na Twojej maszynie, klikając poniższy przycisk.\n[Select my Default Compiler](command:C_Cpp.SelectIntelliSenseConfiguration?%22walkthrough%22)",
 	"c_cpp.walkthrough.compilers.found.altText": "Obraz przedstawiający wybieranie domyślnego kompilatora za pomocą narzędzia QuickPick oraz listę kompilatorów znalezionych na maszynach użytkowników, z których jeden jest zaznaczony.",
 	"c_cpp.walkthrough.create.cpp.file.title": "Tworzenie pliku C++",
 	"c_cpp.walkthrough.create.cpp.file.description": "[Otwórz](command:toSide:workbench.action.files.openFile) lub [utwórz](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D) plik C++. Pamiętaj, aby zapisać go z rozszerzeniem „.cpp” (na przykład „helloworld.cpp”). \n[Utwórz plik C++](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D)",
@@ -426,16 +426,16 @@
 	"c_cpp.walkthrough.run.debug.windows.description": "Otwórz plik C++ i kliknij przycisk odtwarzania w prawym górnym rogu edytora lub naciśnij klawisz F5, gdy korzystasz z pliku. Wybierz pozycję „cl.exe — kompiluj i debuguj aktywny plik\", aby uruchomić go za pomocą debugera.",
 	"c_cpp.walkthrough.run.debug.windows.altText": "Obraz przedstawiający punkt przerwania w pliku C++, przycisk F5 i symbol uruchomienia w prawym górnym rogu",
 	"c_cpp.walkthrough.customize.debugging.title": "Dostosowywanie debugowania",
-	"c_cpp.walkthrough.customize.debugging.mac.description": "Możesz dostosować konfigurację debugowania (np. aby przekazywać argumenty do programu w czasie uruchamiania), wybierając pozycję „Dodaj konfigurację debugowania” po prawej stronie przycisku odtwarzania. Niestandardowa konfiguracja debugowania jest zapisywana w pliku projektu launch.json. \n[Dowiedz się więcej](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.linux.description": "Możesz dostosować konfigurację debugowania (np. aby przekazywać argumenty do programu w czasie uruchamiania), wybierając pozycję „Dodaj konfigurację debugowania” po prawej stronie przycisku odtwarzania. Niestandardowa konfiguracja debugowania jest zapisywana w pliku projektu launch.json. \n[Dowiedz się więcej](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.windows.description": "Możesz dostosować konfigurację debugowania (np. aby przekazywać argumenty do programu w czasie uruchamiania), wybierając pozycję „Dodaj konfigurację debugowania” po prawej stronie przycisku odtwarzania. Niestandardowa konfiguracja debugowania jest zapisywana w pliku projektu launch.json. \n[Dowiedz się więcej](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.mac.description": "Aby dostosować konfigurację debugowania, wybierz Eksploratora na pasku działań i otwórz folder zawierający plik C++. Otwórz plik C++ i wybierz pozycję „Dodaj konfigurację debugowania” po prawej stronie przycisku Odtwórz. Nowa konfiguracja debugowania jest zapisywana w pliku launch.json projektu. \n[Dowiedz się więcej](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.linux.description": "Aby dostosować konfigurację debugowania, wybierz Eksploratora na pasku działań i otwórz folder zawierający plik C++. Otwórz plik C++ i wybierz pozycję „Dodaj konfigurację debugowania” po prawej stronie przycisku Odtwórz. Nowa konfiguracja debugowania jest zapisywana w pliku launch.json projektu. \n[Dowiedz się więcej](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.windows.description": "Aby dostosować konfigurację debugowania, wybierz Eksploratora na pasku działań i otwórz folder zawierający plik C++. Otwórz plik C++ i wybierz pozycję „Dodaj konfigurację debugowania” po prawej stronie przycisku Odtwórz. Nowa konfiguracja debugowania jest zapisywana w pliku launch.json projektu. \n[Dowiedz się więcej](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
 	"c_cpp.walkthrough.customize.debugging.altText": "Obraz przedstawiający pozycję „Dodaj konfigurację debugowania” na liście rozwijanej",
-	"c_cpp.codeActions.refactor.inline.macro.title": "Inline macro",
-	"c_cpp.codeActions.refactor.inline.macro.description": "Replace the macro invocation with the expanded code.",
-	"c_cpp.codeActions.refactor.extract.function.title": "Extract to function",
-	"c_cpp.codeActions.refactor.extract.function.description": "Extract the selected code to a free or member function.",
-	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Controls whether to include the header file of a refactored function/symbol to its corresponding source file when doing a refactoring action, such as create declaration/definition.",
-	"c_cpp.configuration.refactoring.includeHeader.always.description": "Always include the header file if it is not included explicitly in its source file.",
-	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Only include the header file if it is not included explicitly in its source file or through implicit inclusion.",
-	"c_cpp.configuration.refactoring.includeHeader.never.description": "Never include the header file."
+	"c_cpp.codeActions.refactor.inline.macro.title": "Osadź makro w tekście",
+	"c_cpp.codeActions.refactor.inline.macro.description": "Zamień wywołanie makra na rozwinięty kod.",
+	"c_cpp.codeActions.refactor.extract.function.title": "Wyodrębnij do funkcji",
+	"c_cpp.codeActions.refactor.extract.function.description": "Wyodrębnij wybrany kod do funkcji swobodnej lub składowej.",
+	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Kontroluje, czy dołączyć plik nagłówkowy refaktoryzowanej funkcji/symbolu do odpowiadającego mu pliku źródłowego podczas wykonywania akcji refaktoryzacji, takiej jak tworzenie deklaracji/definicji.",
+	"c_cpp.configuration.refactoring.includeHeader.always.description": "Zawsze dołączaj plik nagłówka, jeśli nie jest jawnie uwzględniony do swojego pliku źródłowego.",
+	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Dołącz plik nagłówkowy tylko wtedy, gdy nie został on uwzględniony jawnie do pliku źródłowego lub przez niejawne uwzględnienie.",
+	"c_cpp.configuration.refactoring.includeHeader.never.description": "Nigdy nie uwzględniaj pliku nagłówkowego."
 }

package/dist/assets/{ms-vscode.cpptools-1.18.0.vsix/package.nls.pt-br-618e6fff.json → ms-vscode.cpptools-1.19.2.vsix/package.nls.pt-br.json}

@@ -12,7 +12,7 @@
 	"c_cpp.command.configurationEditJSON.title": "Editar Configurações (JSON)",
 	"c_cpp.command.configurationEditUI.title": "Editar Configurações (IU)",
 	"c_cpp.command.selectIntelliSenseConfiguration.title": "Selecione Configuração do IntelliSense...",
-	"c_cpp.command.installCompiler.title": "Install a C++ Compiler",
+	"c_cpp.command.installCompiler.title": "Instalar um compilador C++",
 	"c_cpp.command.rescanCompilers.title": "Examinar novamente os Compiladores",
 	"c_cpp.command.switchHeaderSource.title": "Alternar Cabeçalho/Origem",
 	"c_cpp.command.enableErrorSquiggles.title": "Habilitar Rabiscos de Erro",
@@ -411,9 +411,9 @@
 	"c_cpp.walkthrough.description": "Mergulhe na rica experiência de desenvolvimento C++ do VS Code.",
 	"c_cpp.walkthrough.set.up.title": "Configure seu ambiente C++",
 	"c_cpp.walkthrough.activating.description": "Ativando a extensão C++ para determinar se seu ambiente C++ foi configurado.\nAtivando extensão...",
-	"c_cpp.walkthrough.no.compilers.windows.description": "We could not find a C++ compiler on your machine, which is required to use the C++ extension. Follow the instructions on the right to install one, then click “Find my new Compiler” below.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
-	"c_cpp.walkthrough.no.compilers.description": "Não foi possível localizar um compilador C++ em sua máquina, necessário para usar a extensão C++. Siga as instruções à direita para instalar um e clique em “Localizar meu novo compilador” abaixo.\n[Localizar meu novo Compilador](command:C_Cpp.RescanCompilers?%7B%22sender%22%3A%22walkthrough%22%7D)",
-	"c_cpp.walkthrough.compilers.found.description": "A extensão C++ funciona com um compilador C++. Selecione um daqueles que já estão em sua máquina clicando no botão abaixo.\n[Selecione meu Compilador Padrão](command:C_Cpp.SelectDefaultCompiler?%7B%22sender%22%3A%22walkthrough%22%7D)",
+	"c_cpp.walkthrough.no.compilers.windows.description": "Não foi possível encontrar um compilador C++ em sua máquina, que é necessário para usar a extensão C++. Siga as instruções à direita para instalar um e clique em “Encontrar meu novo compilador” abaixo.\n[Encontre meu novo Compilador](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.no.compilers.description": "Não foi possível encontrar um compilador C++ em sua máquina, que é necessário para usar a extensão C++. Selecione “Instalar um compilador C++” para ter um compilador instalado para você ou siga as instruções à direita para instalar um e clique em “Encontrar meu novo compilador” abaixo.\n[Instalar um Compilador C++](command:C_Cpp.InstallCompiler?%22walkthrough%22)\n[Encontre meu novo Compilador](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.compilers.found.description": "A extensão C++ funciona com um compilador C++. Selecione um daqueles que já estão em sua máquina clicando no botão abaixo.\n[Selecione meu Compilador Padrão](command:C_Cpp.SelectIntelliSenseConfiguration?%22walkthrough%22)",
 	"c_cpp.walkthrough.compilers.found.altText": "Imagem mostrando a seleção rápida de um compilador padrão e a lista de compiladores encontrados na máquina do usuário, um dos quais está selecionado.",
 	"c_cpp.walkthrough.create.cpp.file.title": "Criar um arquivo C++",
 	"c_cpp.walkthrough.create.cpp.file.description": "[Abrir](command:toSide:workbench.action.files.openFile) ou [criar](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D) em C++ arquivo. Certifique-se de salvá-lo com a extensão \".cpp\", como \"helloworld.cpp\".\n[Criar um arquivo C++](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D)",
@@ -426,16 +426,16 @@
 	"c_cpp.walkthrough.run.debug.windows.description": "Abra seu arquivo C++ e clique no botão play no canto superior direito do editor ou pressione F5 quando estiver no arquivo. Selecione \"cl.exe - Construir e depurar arquivo ativo\" para executar com o depurador.",
 	"c_cpp.walkthrough.run.debug.windows.altText": "Imagem mostrando um ponto de interrupção em um arquivo C++, o botão f5 e o símbolo de execução no canto superior direito",
 	"c_cpp.walkthrough.customize.debugging.title": "Personalizar a depuração",
-	"c_cpp.walkthrough.customize.debugging.mac.description": "Você pode personalizar sua configuração de depuração (por exemplo, para passar argumentos para seu programa em tempo de execução) selecionando \"Adicionar Configuração de Depuração\" à direita do botão de reprodução. A configuração de depuração personalizada é salva no arquivo launch.json do seu projeto. \n[Saiba Mais](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.linux.description": "Você pode personalizar sua configuração de depuração (por exemplo, para passar argumentos para seu programa em tempo de execução) selecionando \"Adicionar Configuração de Depuração\" à direita do botão de reprodução. A configuração de depuração personalizada é salva no arquivo launch.json do seu projeto.\n[Saiba mais](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.windows.description": "Você pode personalizar sua configuração de depuração (por exemplo, para passar argumentos para seu programa em tempo de execução) selecionando \"Adicionar Configuração de Depuração\" à direita do botão de reprodução. A configuração de depuração personalizada é salva no arquivo launch.json do seu projeto.\n[Saiba mais](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.mac.description": "Para personalizar a configuração de depuração, selecione o Explorer na barra de atividades e abra uma pasta que inclua o arquivo C++. Abra o arquivo C++ e selecione \"Adicionar Configuração de Depuração\" à direita do botão reproduzir. A nova configuração de depuração é salva no arquivo launch.json do projeto. \n[Saiba mais](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.linux.description": "Para personalizar a configuração de depuração, selecione o Explorer na barra de atividades e abra uma pasta que inclua o arquivo C++. Abra o arquivo C++ e selecione \"Adicionar Configuração de Depuração\" à direita do botão reproduzir. A nova configuração de depuração é salva no arquivo launch.json do projeto. \n[Saiba mais](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.windows.description": "Para personalizar a configuração de depuração, selecione o Explorer na barra de atividades e abra uma pasta que inclua o arquivo C++. Abra o arquivo C++ e selecione \"Adicionar Configuração de Depuração\" à direita do botão reproduzir. A nova configuração de depuração é salva no arquivo launch.json do projeto. \n[Saiba mais](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
 	"c_cpp.walkthrough.customize.debugging.altText": "Imagem que mostra Adicionar configuração de depuração no menu suspenso",
-	"c_cpp.codeActions.refactor.inline.macro.title": "Inline macro",
-	"c_cpp.codeActions.refactor.inline.macro.description": "Replace the macro invocation with the expanded code.",
-	"c_cpp.codeActions.refactor.extract.function.title": "Extract to function",
-	"c_cpp.codeActions.refactor.extract.function.description": "Extract the selected code to a free or member function.",
-	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Controls whether to include the header file of a refactored function/symbol to its corresponding source file when doing a refactoring action, such as create declaration/definition.",
-	"c_cpp.configuration.refactoring.includeHeader.always.description": "Always include the header file if it is not included explicitly in its source file.",
-	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Only include the header file if it is not included explicitly in its source file or through implicit inclusion.",
-	"c_cpp.configuration.refactoring.includeHeader.never.description": "Never include the header file."
+	"c_cpp.codeActions.refactor.inline.macro.title": "Macro embutida",
+	"c_cpp.codeActions.refactor.inline.macro.description": "Substitua a invocação da macro pelo código expandido.",
+	"c_cpp.codeActions.refactor.extract.function.title": "Extrair para função",
+	"c_cpp.codeActions.refactor.extract.function.description": "Extraia o código selecionado para uma função free ou membro.",
+	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Controla se o arquivo de cabeçalho de uma função/símbolo refatorado deve ser incluído em seu arquivo de origem correspondente ao executar uma ação de refatoração, como criar declaração/definição.",
+	"c_cpp.configuration.refactoring.includeHeader.always.description": "Sempre inclua o arquivo de cabeçalho se ele não estiver incluído explicitamente em seu arquivo de origem.",
+	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Inclua o arquivo de cabeçalho apenas se ele não estiver incluído explicitamente em seu arquivo de origem ou por meio de inclusão implícita.",
+	"c_cpp.configuration.refactoring.includeHeader.never.description": "Nunca inclua o arquivo de cabeçalho."
 }

package/dist/assets/{ms-vscode.cpptools-1.18.0.vsix/package.nls.ru-b8aa8e97.json → ms-vscode.cpptools-1.19.2.vsix/package.nls.ru.json}

@@ -12,7 +12,7 @@
 	"c_cpp.command.configurationEditJSON.title": "Изменить конфигурации (JSON)",
 	"c_cpp.command.configurationEditUI.title": "Изменить конфигурации (пользовательский интерфейс)",
 	"c_cpp.command.selectIntelliSenseConfiguration.title": "Выбрать конфигурацию IntelliSense…",
-	"c_cpp.command.installCompiler.title": "Install a C++ Compiler",
+	"c_cpp.command.installCompiler.title": "Установка компилятора C++",
 	"c_cpp.command.rescanCompilers.title": "Повторный поиск компиляторов",
 	"c_cpp.command.switchHeaderSource.title": "Переключить заголовок/источник",
 	"c_cpp.command.enableErrorSquiggles.title": "Включить волнистые линии для ошибок",
@@ -411,9 +411,9 @@
 	"c_cpp.walkthrough.description": "Изучите подробнее взаимодействие разработки C++ в VS Code.",
 	"c_cpp.walkthrough.set.up.title": "Настройка среды C++",
 	"c_cpp.walkthrough.activating.description": "Активируйте расширение C++, чтобы определить, настроена ли среда C++.\nАктивация расширения...",
-	"c_cpp.walkthrough.no.compilers.windows.description": "We could not find a C++ compiler on your machine, which is required to use the C++ extension. Follow the instructions on the right to install one, then click “Find my new Compiler” below.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
-	"c_cpp.walkthrough.no.compilers.description": "Не удалось найти на этом компьютере компилятор C++, необходимый для использования расширения C++. Следуйте инструкциям справа, чтобы установить его, затем нажмите \"Найти мой новый компилятор\" ниже.\n[Найти мой новый компилятор](command:C_Cpp.RescanCompilers?%7B%22sender%22%3A%22walkthrough%22%7D)",
-	"c_cpp.walkthrough.compilers.found.description": "Расширение C++ работает с компилятором C++. Выберите один из тех, которые уже установлены на вашем компьютере, нажав кнопку ниже.\n[Выбрать мой компилятор по умолчанию](command:C_Cpp.SelectDefaultCompiler?%7B%22sender%22%3A%22walkthrough%22%7D)",
+	"c_cpp.walkthrough.no.compilers.windows.description": "Не удалось найти на компьютере компилятор C++, необходимый для использования расширения C++. Следуйте инструкциям справа, чтобы установить его, затем щелкните \"Найти новый компилятор\" ниже.\n[Найти мой новый компилятор](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.no.compilers.description": "Не удалось найти на компьютере компилятор C++, необходимый для использования расширения C++. Выберите \"Установить компилятор C++\", и компилятор будет установлен для вас. Либо следуйте инструкциям справа, чтобы установить компилятор, а затем нажмите кнопку \"Найти новый компилятор\" ниже.\n[Установка компилятора C++](command:C_Cpp.InstallCompiler?%22walkthrough%22)\n[Найти мой новый компилятор](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.compilers.found.description": "Расширение C++ работает с компилятором C++. Выберите один из тех, которые уже установлены на этом компьютере, щелкнув кнопку ниже.\n[Выберите компилятор по умолчанию](command:C_Cpp.SelectIntelliSenseConfiguration?%22walkthrough%22)",
 	"c_cpp.walkthrough.compilers.found.altText": "Изображение, показывающее быстрый выбор компилятора по умолчанию и список компиляторов, найденных на компьютере пользователя, один из которых выбран.",
 	"c_cpp.walkthrough.create.cpp.file.title": "Создание файла C++",
 	"c_cpp.walkthrough.create.cpp.file.description": "[Открыть](command:toSide:workbench.action.files.openFile) или [создать](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D) файл C++. Обязательно сохраните его с расширением \".cpp\", например \"helloworld.cpp\".\n[Создать файл C++](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D)",
@@ -426,16 +426,16 @@
 	"c_cpp.walkthrough.run.debug.windows.description": "Откройте файл C++ и нажмите кнопку воспроизведения в правом верхнем углу редактора или нажмите F5 при открытии файла. Выберите \"cl.exe — сборка и отладка активного файла\" для запуска с отладчиком.",
 	"c_cpp.walkthrough.run.debug.windows.altText": "Изображение, показывающее точку останова в файле C++, кнопку F5 и символ запуска в правом верхнем углу",
 	"c_cpp.walkthrough.customize.debugging.title": "Настройка отладки",
-	"c_cpp.walkthrough.customize.debugging.mac.description": "Вы можете настроить конфигурацию отладки (например, передать аргументы программе во время выполнения), выбрав \"Добавить конфигурацию отладки\" справа от кнопки воспроизведения. Пользовательская конфигурация отладки сохраняется в файле launch.json вашего проекта.\n[Подробнее](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.linux.description": "Вы можете настроить конфигурацию отладки (например, передать аргументы программе во время выполнения), выбрав \"Добавить конфигурацию отладки\" справа от кнопки воспроизведения. Пользовательская конфигурация отладки сохраняется в файле launch.json проекта.\n[Подробнее](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.windows.description": "Вы можете настроить конфигурацию отладки (например, передать аргументы программе во время выполнения), выбрав \"Добавить конфигурацию отладки\" справа от кнопки воспроизведения. Пользовательская конфигурация отладки сохраняется в файле launch.json вашего проекта.\n[Подробнее](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.mac.description": "Чтобы настроить конфигурацию отладки, выберите обозреватель на панели действий и откройте папку, содержащую файл C++. Откройте файл C++ и выберите \"Добавить конфигурацию отладки\" справа от кнопки воспроизведения. Новая конфигурация отладки сохранена в файле launch.json проекта. \n[Дополнительные сведения](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.linux.description": "Чтобы настроить конфигурацию отладки, выберите обозреватель на панели действий и откройте папку, содержащую файл C++. Откройте файл C++ и выберите \"Добавить конфигурацию отладки\" справа от кнопки воспроизведения. Новая конфигурация отладки сохранена в файле launch.json проекта. \n[Дополнительные сведения](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.windows.description": "Чтобы настроить конфигурацию отладки, выберите обозреватель на панели действий и откройте папку, содержащую файл C++. Откройте файл C++ и выберите \"Добавить конфигурацию отладки\" справа от кнопки воспроизведения. Новая конфигурация отладки сохранена в файле launch.json проекта. \n[Дополнительные сведения](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
 	"c_cpp.walkthrough.customize.debugging.altText": "Изображение, показывающее пункт \"Добавить конфигурацию отладки\" в раскрывающемся списке.",
-	"c_cpp.codeActions.refactor.inline.macro.title": "Inline macro",
-	"c_cpp.codeActions.refactor.inline.macro.description": "Replace the macro invocation with the expanded code.",
-	"c_cpp.codeActions.refactor.extract.function.title": "Extract to function",
-	"c_cpp.codeActions.refactor.extract.function.description": "Extract the selected code to a free or member function.",
-	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Controls whether to include the header file of a refactored function/symbol to its corresponding source file when doing a refactoring action, such as create declaration/definition.",
-	"c_cpp.configuration.refactoring.includeHeader.always.description": "Always include the header file if it is not included explicitly in its source file.",
-	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Only include the header file if it is not included explicitly in its source file or through implicit inclusion.",
-	"c_cpp.configuration.refactoring.includeHeader.never.description": "Never include the header file."
+	"c_cpp.codeActions.refactor.inline.macro.title": "Встроенный макрос",
+	"c_cpp.codeActions.refactor.inline.macro.description": "Заменить вызов макроса расширенным кодом.",
+	"c_cpp.codeActions.refactor.extract.function.title": "Извлечение в функцию",
+	"c_cpp.codeActions.refactor.extract.function.description": "Извлечение выбранного кода в свободную функцию или функцию-член.",
+	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Определяет, следует ли включать файл заголовка переработанной функции/символа в соответствующий исходный файл при выполнении действия рефакторинга, например при создании объявления/определения.",
+	"c_cpp.configuration.refactoring.includeHeader.always.description": "Всегда включать файл заголовка, если он не включен явным образом в исходный файл.",
+	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Включать файл заголовка, только если он не включен явным образом в исходный файл или путем неявного включения.",
+	"c_cpp.configuration.refactoring.includeHeader.never.description": "Никогда не включать файл заголовка."
 }

package/dist/assets/{ms-vscode.cpptools-1.18.0.vsix/package.nls.tr-61b293ea.json → ms-vscode.cpptools-1.19.2.vsix/package.nls.tr.json}

@@ -12,7 +12,7 @@
 	"c_cpp.command.configurationEditJSON.title": "Yapılandırmaları Düzenle (JSON)",
 	"c_cpp.command.configurationEditUI.title": "Yapılandırmaları Düzenle (UI)",
 	"c_cpp.command.selectIntelliSenseConfiguration.title": "IntelliSense Yapılandırmasını Seç...",
-	"c_cpp.command.installCompiler.title": "Install a C++ Compiler",
+	"c_cpp.command.installCompiler.title": "C++ Derleyicisi Yükle",
 	"c_cpp.command.rescanCompilers.title": "Derleyicileri Yeniden Tara",
 	"c_cpp.command.switchHeaderSource.title": "Üst Bilgiyi/Kaynağı Değiştir",
 	"c_cpp.command.enableErrorSquiggles.title": "Hata İlişkilendirmelerini Etkinleştir",
@@ -411,9 +411,9 @@
 	"c_cpp.walkthrough.description": "VS Code'un zengin C++ geliştirme deneyimine dalın.",
 	"c_cpp.walkthrough.set.up.title": "C++ Ortamınızı kurun",
 	"c_cpp.walkthrough.activating.description": "C++ Ortamınızın kurulup kurulmadığını belirlemek için C++ uzantısını etkinleştirme.\nUzantı Etkinleştiriliyor...",
-	"c_cpp.walkthrough.no.compilers.windows.description": "We could not find a C++ compiler on your machine, which is required to use the C++ extension. Follow the instructions on the right to install one, then click “Find my new Compiler” below.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
-	"c_cpp.walkthrough.no.compilers.description": "Makinenizde C++ uzantısını kullanmak için gerekli olan bir C++ derleyicisi bulamadık. Bir tane yüklemek için sağdaki talimatları izleyin, ardından aşağıdaki “Yeni Derleyicimi bul” seçeneğine tıklayın.\n[Yeni Derleyicimi bul](command:C_Cpp.RescanCompilers?%7B%22sender%22%3A%22walkthrough%22%7D)",
-	"c_cpp.walkthrough.compilers.found.description": "C++ uzantısı, bir C++ derleyicisiyle çalışır. Aşağıdaki düğmeyi tıklayarak makinenizde zaten bulunanlardan birini seçin.\n[Varsayılan Derleyicimi Seç](command:C_Cpp.SelectDefaultCompiler?%7B%22sender%22%3A%22walkthrough%22%7D)",
+	"c_cpp.walkthrough.no.compilers.windows.description": "Makinenizde C++ uzantısını kullanmak için gerekli olan bir C++ derleyicisi bulamadık. Bir tane yüklemek için sağdaki talimatları izleyin, ardından aşağıdaki “Yeni Derleyicimi bul” seçeneğine tıklayın.\n[Yeni Derleyicimi bul](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.no.compilers.description": "Makinenizde C++ uzantısını kullanmak için gerekli olan bir C++ derleyicisi bulamadık. Sizin için bir derleyicinin kurulmasını sağlamak için “C++ Derleyicisi Kur”u seçin veya bir derleyiciyi kurmak için sağdaki yönergeleri izleyin ve ardından aşağıdaki “Yeni Derleyicimi Bul”a tıklayın.\n[Bir C++ Derleyicisi yükle](command:C_Cpp.RescanCompilers?%22walkthrough%22)\n[Yeni Derleyicimi bul](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.compilers.found.description": "C++ uzantısı, bir C++ derleyicisiyle çalışır. Aşağıdaki düğmeyi tıklayarak makinenizde zaten bulunanlardan birini seçin.\n[Varsayılan Derleyicimi seç](command:C_Cpp.SelectIntelliSenseConfiguration?%22walkthrough%22)",
 	"c_cpp.walkthrough.compilers.found.altText": "Varsayılan bir derleyici seçme hızlı seçimini ve kullanıcının makinesinde bulunan ve biri seçili olan derleyicilerin listesini gösteren resim.",
 	"c_cpp.walkthrough.create.cpp.file.title": "C++ dosyası oluşturun",
 	"c_cpp.walkthrough.create.cpp.file.description": "[Aç](command:toSide:workbench.action.files.openFile) veya [create](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D) bir C++ dosya. \"helloworld.cpp\" gibi \".cpp\" uzantısıyla kaydettiğinizden emin olun.\n[Bir C++ Dosyası Oluşturun](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D)",
@@ -426,16 +426,16 @@
 	"c_cpp.walkthrough.run.debug.windows.description": "C++ dosyanızı açın ve düzenleyicinin sağ üst köşesindeki oynat düğmesine tıklayın veya dosyadayken F5'e basın. Hata ayıklayıcı ile çalıştırmak için \"cl.exe - Etkin dosya oluştur ve hata ayıkla\" seçeneğini seçin.",
 	"c_cpp.walkthrough.run.debug.windows.altText": "C++ dosyasında bir kesme noktası, f5 düğmesi ve sağ üstte çalıştır simgesini gösteren resim",
 	"c_cpp.walkthrough.customize.debugging.title": "Hata ayıklamayı özelleştir",
-	"c_cpp.walkthrough.customize.debugging.mac.description": "Yürüt düğmesinin sağındaki \"Hata Ayıklama Yapılandırması Ekle\"yi seçerek hata ayıklama yapılandırmanızı özelleştirebilirsiniz (ör. çalışma zamanında programınıza bağımsız değişkenler geçirmek için). Özel hata ayıklama yapılandırması, projenizin launch.json dosyasına kaydedilir.\n[Daha Fazla Bilgi Edinin](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.linux.description": "Yürüt düğmesinin sağındaki \"Hata Ayıklama Yapılandırması Ekle\"yi seçerek hata ayıklama yapılandırmanızı özelleştirebilirsiniz (ör. çalışma zamanında programınıza bağımsız değişkenler geçirmek için). Özel hata ayıklama yapılandırması, projenizin launch.json dosyasına kaydedilir.\n[Daha Fazla Bilgi Edinin](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.windows.description": "Yürüt düğmesinin sağındaki \"Hata Ayıklama Yapılandırması Ekle\"yi seçerek hata ayıklama yapılandırmanızı özelleştirebilirsiniz (ör. çalışma zamanında programınıza bağımsız değişkenler geçirmek için). Özel hata ayıklama yapılandırması, projenizin launch.json dosyasına kaydedilir. \n[Daha Fazla Bilgi Edinin](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.mac.description": "Hata ayıklama yapılandırmanızı özelleştirmek için etkinlik çubuğunda Gezgin'i seçin ve C++ dosyanızı içeren bir klasörü açın. C++ dosyasını açın ve oynat düğmesinin sağındaki \"Hata Ayıklama Yapılandırması Ekle\" seçeneğini seçin. Yeni hata ayıklama yapılandırması projenizin launch.json dosyasına kaydedilir. \n[Learn More](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.linux.description": "Hata ayıklama yapılandırmanızı özelleştirmek için etkinlik çubuğunda Gezgin'i seçin ve C++ dosyanızı içeren bir klasörü açın. C++ dosyasını açın ve oynat düğmesinin sağındaki \"Hata Ayıklama Yapılandırması Ekle\" seçeneğini seçin. Yeni hata ayıklama yapılandırması projenizin launch.json dosyasına kaydedilir. \n[Learn More](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.windows.description": "Hata ayıklama yapılandırmanızı özelleştirmek için etkinlik çubuğunda Gezgin'i seçin ve C++ dosyanızı içeren bir klasörü açın. C++ dosyasını açın ve oynat düğmesinin sağındaki \"Hata Ayıklama Yapılandırması Ekle\" seçeneğini seçin. Yeni hata ayıklama yapılandırması projenizin launch.json dosyasına kaydedilir. \n[Learn More](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
 	"c_cpp.walkthrough.customize.debugging.altText": "Açılır menüde Hata Ayıklama Yapılandırması Ekle'yi gösteren resim",
-	"c_cpp.codeActions.refactor.inline.macro.title": "Inline macro",
-	"c_cpp.codeActions.refactor.inline.macro.description": "Replace the macro invocation with the expanded code.",
-	"c_cpp.codeActions.refactor.extract.function.title": "Extract to function",
-	"c_cpp.codeActions.refactor.extract.function.description": "Extract the selected code to a free or member function.",
-	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Controls whether to include the header file of a refactored function/symbol to its corresponding source file when doing a refactoring action, such as create declaration/definition.",
-	"c_cpp.configuration.refactoring.includeHeader.always.description": "Always include the header file if it is not included explicitly in its source file.",
-	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Only include the header file if it is not included explicitly in its source file or through implicit inclusion.",
-	"c_cpp.configuration.refactoring.includeHeader.never.description": "Never include the header file."
+	"c_cpp.codeActions.refactor.inline.macro.title": "Satır içi makro",
+	"c_cpp.codeActions.refactor.inline.macro.description": "Makro çağrısını genişletilmiş kodla değiştirin.",
+	"c_cpp.codeActions.refactor.extract.function.title": "İşleve ayıkla",
+	"c_cpp.codeActions.refactor.extract.function.description": "Seçilen kodu ücretsiz veya üye bir işleve çıkarın.",
+	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Bildirim/tanım oluşturma gibi bir yeniden düzenleme eylemi gerçekleştirildiğinde, yeniden düzenlenen bir işlevin/sembolün üst bilgi dosyasının karşılık gelen kaynak dosyasına eklenmiş olup olmadığını kontrol eder.",
+	"c_cpp.configuration.refactoring.includeHeader.always.description": "Kaynak dosyasına açıkça eklenmediyse, üst bilgi dosyasını her zaman dahil et.",
+	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Üst bilgi dosyasını yalnızca kaynak dosyasına açıkça eklenmediyse veya örtük ekleme yoluyla dahil et.",
+	"c_cpp.configuration.refactoring.includeHeader.never.description": "Üst bilgi dosyasını hiçbir zaman ekleme."
 }

package/dist/assets/{ms-vscode.cpptools-1.18.0.vsix/package.nls.zh-cn-2fb473f1.json → ms-vscode.cpptools-1.19.2.vsix/package.nls.zh-cn.json}

@@ -12,7 +12,7 @@
 	"c_cpp.command.configurationEditJSON.title": "编辑配置(JSON)",
 	"c_cpp.command.configurationEditUI.title": "编辑配置(UI)",
 	"c_cpp.command.selectIntelliSenseConfiguration.title": "选择 IntelliSense 配置...",
-	"c_cpp.command.installCompiler.title": "Install a C++ Compiler",
+	"c_cpp.command.installCompiler.title": "安装 C++ 编译器",
 	"c_cpp.command.rescanCompilers.title": "重新扫描编译器",
 	"c_cpp.command.switchHeaderSource.title": "切换标头/源",
 	"c_cpp.command.enableErrorSquiggles.title": "启用错误波形曲线",
@@ -411,9 +411,9 @@
 	"c_cpp.walkthrough.description": "深入了解 VS Code 丰富的 C++ 开发体验。",
 	"c_cpp.walkthrough.set.up.title": "设置 C++ 环境",
 	"c_cpp.walkthrough.activating.description": "激活 C++ 扩展以确定是否已设置 C++ 环境。\n正在激活扩展...",
-	"c_cpp.walkthrough.no.compilers.windows.description": "We could not find a C++ compiler on your machine, which is required to use the C++ extension. Follow the instructions on the right to install one, then click “Find my new Compiler” below.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
-	"c_cpp.walkthrough.no.compilers.description": "无法在计算机上找到 C++ 编译器，这是使用 C++ 扩展所必需的。请按照右侧的说明安装一个编译器，然后单击下面的“查找我的新编译器”。\n[查找我的新编译器](command:C_Cpp.RescanCompilers?%7B%22sender%22%3A%22walkthrough%22%7D)",
-	"c_cpp.walkthrough.compilers.found.description": "C++ 扩展需要与 C++ 编译器一起使用。通过单击下面的按钮从计算机上已有的编译器中选择一个。\n[选择我的默认编译器](command:C_Cpp.SelectDefaultCompiler?%7B%22sender%22%3A%22walkthrough%22%7D)",
+	"c_cpp.walkthrough.no.compilers.windows.description": "无法在计算机上找到 C++ 编译器，这是使用 C++ 扩展所必需的。请按照右侧的说明安装一个编译器，然后单击下面的“查找我的新编译器”。\n[查找我的新编译器](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.no.compilers.description": "在你的计算机上找不到 C++ 编译器，而使用 C++ 扩展需要该编译器。请选择“安装 C++ 编译器”，为你安装编译器，或者按照右侧的说明安装编译器，然后单击下面的“查找我的新编译器”。\n[安装 C++ 编译器](command:C_Cpp.InstallCompiler?%22walkthrough%22)\n[查找我的新编译器](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.compilers.found.description": "C++ 扩展需要与 C++ 编译器一起使用。通过点击下面的按钮从机器上已有的编译器中选择一个。\n[选择我的默认编译器](command:C_Cpp.SelectIntelliSenseConfiguration?%22walkthrough%22)",
 	"c_cpp.walkthrough.compilers.found.altText": "显示在用户计算机上找到的选定默认编译器快捷检查和编译器列表的图像，其中一个已选定。",
 	"c_cpp.walkthrough.create.cpp.file.title": "创建 C++ 文件",
 	"c_cpp.walkthrough.create.cpp.file.description": "[打开](command:toSide:workbench.action.files.openFile)或[创建](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D)一个 C++ 文件。请确保将其保存为 \".cpp\" 扩展名，例如 \"helloworld.cpp\"。\n[创建 C++ 文件](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D)",
@@ -426,16 +426,16 @@
 	"c_cpp.walkthrough.run.debug.windows.description": "打开你的 C++ 文件，然后在编辑器右上角点击播放按钮，或者当你在该文件上时按下 F5。选择“cl.exe - 构建和调试活动文件”以使用调试器运行。",
 	"c_cpp.walkthrough.run.debug.windows.altText": "显示 C++ 文件中的断点、f5 按钮和右上角的运行符号的图像",
 	"c_cpp.walkthrough.customize.debugging.title": "自定义调试",
-	"c_cpp.walkthrough.customize.debugging.mac.description": "可以通过在播放按钮右侧选择“添加调试配置”来自定义调试配置(例如，在运行时传递参数给程序)。自定义调试配置将保存在项目的 launch.json 文件中。\n[了解更多](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.linux.description": "可以通过在播放按钮右侧选择“添加调试配置”来自定义调试配置(例如，在运行时传递参数给程序)。自定义调试配置将保存在项目的 launch.json 文件中。\n[了解更多](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.windows.description": "可以通过在播放按钮右侧选择“添加调试配置”来自定义调试配置(例如，在运行时传递参数给程序)。自定义的调试配置将保存在项目的 launch.json 文件中。\n[了解更多](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.mac.description": "若要自定义调试配置，请在活动栏中选择“资源管理器”，然后打开包含 C++ 文件的文件夹。打开 C++ 文件，然后选择播放按钮右侧的“添加调试配置”。新的调试配置将保存到项目的 launch.json 文件中。\n[了解详细信息](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.linux.description": "若要自定义调试配置，请在活动栏中选择“资源管理器”，然后打开包含 C++ 文件的文件夹。打开 C++ 文件，然后选择播放按钮右侧的“添加调试配置”。新的调试配置将保存到项目的 launch.json 文件中。\n[了解详细信息](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.windows.description": "若要自定义调试配置，请在活动栏中选择“资源管理器”，然后打开包含 C++ 文件的文件夹。打开 C++ 文件，然后选择播放按钮右侧的“添加调试配置”。新的调试配置将保存到项目的 launch.json 文件中。\n[了解详细信息](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
 	"c_cpp.walkthrough.customize.debugging.altText": "显示下拉列表中“添加调试配置”的图像",
-	"c_cpp.codeActions.refactor.inline.macro.title": "Inline macro",
-	"c_cpp.codeActions.refactor.inline.macro.description": "Replace the macro invocation with the expanded code.",
-	"c_cpp.codeActions.refactor.extract.function.title": "Extract to function",
-	"c_cpp.codeActions.refactor.extract.function.description": "Extract the selected code to a free or member function.",
-	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Controls whether to include the header file of a refactored function/symbol to its corresponding source file when doing a refactoring action, such as create declaration/definition.",
-	"c_cpp.configuration.refactoring.includeHeader.always.description": "Always include the header file if it is not included explicitly in its source file.",
-	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Only include the header file if it is not included explicitly in its source file or through implicit inclusion.",
-	"c_cpp.configuration.refactoring.includeHeader.never.description": "Never include the header file."
+	"c_cpp.codeActions.refactor.inline.macro.title": "内联宏",
+	"c_cpp.codeActions.refactor.inline.macro.description": "将宏调用替换为展开的代码。",
+	"c_cpp.codeActions.refactor.extract.function.title": "提取到函数",
+	"c_cpp.codeActions.refactor.extract.function.description": "将所选代码提取到自由函数或成员函数。",
+	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "控制在执行重构操作(例如创建声明/定义)时是否将已重构的函数/符号的头文件包含在其相应的源文件。",
+	"c_cpp.configuration.refactoring.includeHeader.always.description": "如果头文件未显式包含在源文件中，则始终包含该头文件。",
+	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "仅当头文件未显式包含在源文件中或通过隐式包含来包含在内时，才包含该头文件。",
+	"c_cpp.configuration.refactoring.includeHeader.never.description": "从不包含头文件。"
 }

package/dist/assets/{ms-vscode.cpptools-1.18.0.vsix/package.nls.zh-tw-bd960e98.json → ms-vscode.cpptools-1.19.2.vsix/package.nls.zh-tw.json}

@@ -12,7 +12,7 @@
 	"c_cpp.command.configurationEditJSON.title": "編輯組態 (JSON)",
 	"c_cpp.command.configurationEditUI.title": "編輯組態 (UI)",
 	"c_cpp.command.selectIntelliSenseConfiguration.title": "選取 IntelliSense 設定...",
-	"c_cpp.command.installCompiler.title": "Install a C++ Compiler",
+	"c_cpp.command.installCompiler.title": "安裝 C++ 編譯器",
 	"c_cpp.command.rescanCompilers.title": "掃描編譯器",
 	"c_cpp.command.switchHeaderSource.title": "切換標頭/來源",
 	"c_cpp.command.enableErrorSquiggles.title": "啟用錯誤波浪線",
@@ -411,9 +411,9 @@
 	"c_cpp.walkthrough.description": "深入了解 VS Code 豐富的 C++ 開發體驗。",
 	"c_cpp.walkthrough.set.up.title": "設定您的 C++ 環境",
 	"c_cpp.walkthrough.activating.description": "啟用 C++ 延伸模組，以判斷是否已設定您的 C++ 環境。\n正在啟用延伸模組...",
-	"c_cpp.walkthrough.no.compilers.windows.description": "We could not find a C++ compiler on your machine, which is required to use the C++ extension. Follow the instructions on the right to install one, then click “Find my new Compiler” below.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
-	"c_cpp.walkthrough.no.compilers.description": "我們在您的電腦上找不到 C++ 編譯器，這是使用 C++ 延伸模組所需項目。請遵循右側的指示來安裝，然後按一下下方的 [尋找我的新編譯器]。\n[尋找我的新編譯器](command:C_Cpp.RescanCompilers?%7B%22sender%22%3A%22walkthrough%22%7D)",
-	"c_cpp.walkthrough.compilers.found.description": "C++ 延伸模組可與 C++ 編譯器搭配運作。按一下下方的按鈕，從電腦上已存在的編譯器選取一個。\n[選取我的預設編譯器](command:C_Cpp.SelectDefaultCompiler?%7B%22sender%22%3A%22walkthrough%22%7D)",
+	"c_cpp.walkthrough.no.compilers.windows.description": "我們在您的電腦上找不到 C++ 編譯器，需要此編譯器才能使用 C++ 延伸模組。請遵循右側的指示安裝編譯器，然後按一下下方的 [尋找我的新編譯器]。\n[尋找我的新編譯器](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.no.compilers.description": "我們在您的電腦上找不到 C++ 編譯器，需要此編譯器才能使用 C++ 延伸模組。請選取 [安裝 C++ 編譯器] 為您安裝編譯器，或遵循右側的指示安裝編譯器，然後按一下下方的 [尋找我的新編譯器]。\n[安裝 C++ 編譯器](command:C_Cpp.InstallCompiler?%22walkthrough%22)\n[尋找我的新編譯器](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
+	"c_cpp.walkthrough.compilers.found.description": "C++ 延伸模組可與 C++ 編譯器搭配運作。按一下下方的按鈕，從電腦上已存在的編譯器選取一個。\n[選取我的預設編譯器](command:C_Cpp.SelectIntelliSenseConfiguration?%22walkthrough%22)",
 	"c_cpp.walkthrough.compilers.found.altText": "影像顯示選取預設編譯器快速選取，以及在使用者電腦上找到的編譯器清單 (已選取其中一個)。",
 	"c_cpp.walkthrough.create.cpp.file.title": "建立 C++ 檔案",
 	"c_cpp.walkthrough.create.cpp.file.description": "[開啟](command:toSide:workbench.action.files.openFile) 或 [建立](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D) C++ 檔案。務必使用 \".cpp\" 副檔名來儲存它，例如 \"helloworld.cpp\"。\n[建立 C++ 檔案](command:toSide:workbench.action.files.newUntitledFile?%7B%22languageId%22%3A%22cpp%22%7D)",
@@ -426,16 +426,16 @@
 	"c_cpp.walkthrough.run.debug.windows.description": "開啟您的 C++ 檔案，然後按一下編輯器右上角的播放按鈕，或在開啟檔案上時按 F5。選取 [cl.exe - 建置及偵錯使用中的檔案] 以使用偵錯工具執行。",
 	"c_cpp.walkthrough.run.debug.windows.altText": "影像顯示 C++ 檔案中的中斷點、F5 按鈕，以及右上方的執行符號",
 	"c_cpp.walkthrough.customize.debugging.title": "自訂偵錯",
-	"c_cpp.walkthrough.customize.debugging.mac.description": "您可以選取播放按鈕右側的 [新增偵錯設定]，以自訂您的偵錯設定 (例如，在執行階段將引數傳遞至程式)。自訂偵錯設定會儲存於專案的 launch.json 檔案中。\n[深入了解](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.linux.description": "您可以選取播放按鈕右側的 [新增偵錯設定]，以自訂您的偵錯設定 (例如，在執行階段將引數傳遞至程式)。自訂偵錯設定會儲存於專案的 launch.json 檔案中。\n[深入了解](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
-	"c_cpp.walkthrough.customize.debugging.windows.description": "您可以選取播放按鈕右邊的 [新增偵錯設定]，以自訂您的偵錯設定 (例如，在執行階段將引數傳遞至程式)。自訂偵錯設定會儲存於專案的 launch.json 檔案中。\n[深入了解](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.mac.description": "若要自訂您的偵錯設定，請在活動列中選取 [檔案總管]，然後開啟包含 C++ 檔案的資料夾。開啟 C++ 檔案，然後選取 [播放] 按鈕右邊的 [新增偵錯設定]。新的偵錯組態已儲存至專案的 launch.json 檔案。\n[深入了解](https://code.visualstudio.com/docs/cpp/config-linux#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.linux.description": "若要自訂您的偵錯設定，請在活動列中選取 [檔案總管]，然後開啟包含 C++ 檔案的資料夾。開啟 C++ 檔案，然後選取 [播放] 按鈕右邊的 [新增偵錯設定]。新的偵錯組態已儲存至專案的 launch.json 檔案。\n[深入了解](https://code.visualstudio.com/docs/cpp/config-msvc#_debug-helloworldcpp)",
+	"c_cpp.walkthrough.customize.debugging.windows.description": "若要自訂您的偵錯設定，請在活動列中選取 [檔案總管]，然後開啟包含 C++ 檔案的資料夾。開啟 C++ 檔案，然後選取 [播放] 按鈕右邊的 [新增偵錯設定]。新的偵錯組態已儲存至專案的 launch.json 檔案。\n[深入了解](https://code.visualstudio.com/docs/cpp/config-clang-mac#_debug-helloworldcpp)",
 	"c_cpp.walkthrough.customize.debugging.altText": "影像顯示下拉式清單中 [新增偵錯設定]",
-	"c_cpp.codeActions.refactor.inline.macro.title": "Inline macro",
-	"c_cpp.codeActions.refactor.inline.macro.description": "Replace the macro invocation with the expanded code.",
-	"c_cpp.codeActions.refactor.extract.function.title": "Extract to function",
-	"c_cpp.codeActions.refactor.extract.function.description": "Extract the selected code to a free or member function.",
-	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "Controls whether to include the header file of a refactored function/symbol to its corresponding source file when doing a refactoring action, such as create declaration/definition.",
-	"c_cpp.configuration.refactoring.includeHeader.always.description": "Always include the header file if it is not included explicitly in its source file.",
-	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "Only include the header file if it is not included explicitly in its source file or through implicit inclusion.",
-	"c_cpp.configuration.refactoring.includeHeader.never.description": "Never include the header file."
+	"c_cpp.codeActions.refactor.inline.macro.title": "內嵌巨集",
+	"c_cpp.codeActions.refactor.inline.macro.description": "以展開程式碼取代巨集調用。",
+	"c_cpp.codeActions.refactor.extract.function.title": "擷取至函式",
+	"c_cpp.codeActions.refactor.extract.function.description": "將選取的程式碼擷取至自由或成員函式。",
+	"c_cpp.configuration.refactoring.includeHeader.markdownDescription": "控制在執行重構動作時，是否要將重構函式/符號的標頭檔案包含到其對應的來源檔案，例如建立宣告/定義。",
+	"c_cpp.configuration.refactoring.includeHeader.always.description": "如果標頭檔案未明確包含在其來源檔案中，則一律包含該標頭檔案。",
+	"c_cpp.configuration.refactoring.includeHeader.ifNeeded.description": "只有當標頭檔案未明確包含在其來源檔案或隱含包含時，才包含該標頭檔案。",
+	"c_cpp.configuration.refactoring.includeHeader.never.description": "永不包含標頭檔案。"
 }

package/dist/assets/{ocamllabs.ocaml-platform-1.13.1.vsix/dune-ac59c79b.json → ocamllabs.ocaml-platform-1.16.1.vsix/dune.json}

@@ -801,7 +801,7 @@
           "patterns": [
             {
               "comment": "profile name",
-              "begin": "\\([[:space:]]*([a-zA-Z0-9]+)\\b",
+              "begin": "\\([[:space:]]*([[:word:]]+)\\b",
               "end": "\\)",
               "beginCaptures": {
                 "1": {

package/dist/assets/{ocamllabs.ocaml-platform-1.13.1.vsix/dune-3f9df928.json → ocamllabs.ocaml-platform-1.16.1.vsix/dune2.json}

@@ -2,11 +2,7 @@
   "comments": {
     "lineComment": ";"
   },
-  "brackets": [
-    ["{", "}"],
-    ["[", "]"],
-    ["(", ")"]
-  ],
+  "brackets": [["{", "}"], ["[", "]"], ["(", ")"]],
   "autoClosingPairs": [
     { "open": "{", "close": "}" },
     { "open": "[", "close": "]" },

package/dist/assets/{ocamllabs.ocaml-platform-1.13.1.vsix/dune-b84b8558.json → ocamllabs.ocaml-platform-1.16.1.vsix/dune3.json}

@@ -1,4 +1,8 @@
 {
+  "alias": {
+    "prefix": "alias",
+    "body": ["(alias\n (name $1)\n (deps $2))"]
+  },
   "env": {
     "prefix": "env",
     "body": ["(env\n ($1 $2))"]

package/dist/assets/{ocamllabs.ocaml-platform-1.13.1.vsix/menhir-ba3ffd84.json → ocamllabs.ocaml-platform-1.16.1.vsix/menhir2.json}

@@ -3,13 +3,7 @@
     "lineComment": "//",
     "blockComment": ["/*", "*/"]
   },
-  "brackets": [
-    ["{", "}"],
-    ["[", "]"],
-    ["(", ")"],
-    ["<", ">"],
-    ["%{", "%}"]
-  ],
+  "brackets": [["{", "}"], ["[", "]"], ["(", ")"], ["<", ">"], ["%{", "%}"]],
   "autoClosingPairs": [
     ["{", "}"],
     ["[", "]"],
@@ -19,9 +13,5 @@
     ["'", "'"],
     ["%{", "%}"]
   ],
-  "surroundingPairs": [
-    ["(", ")"],
-    ["<", ">"],
-    ["\"", "\""]
-  ]
+  "surroundingPairs": [["(", ")"], ["<", ">"], ["\"", "\""]]
 }

package/dist/assets/{ocamllabs.ocaml-platform-1.13.1.vsix/ocaml-721ae493.json → ocamllabs.ocaml-platform-1.16.1.vsix/ocaml.json}

@@ -128,7 +128,7 @@
         {
           "comment": "ocamldoc comment",
           "name": "comment.doc.ocaml",
-          "begin": "\\(\\*\\*",
+          "begin": "\\(\\*\\*(?!\\*)",
           "end": "\\*\\)",
           "patterns": [
             { "include": "source.ocaml.ocamldoc#markup" },

package/dist/assets/{ocamllabs.ocaml-platform-1.13.1.vsix/ocaml-8263d04c.json → ocamllabs.ocaml-platform-1.16.1.vsix/ocaml2.json}

@@ -7,12 +7,7 @@
     { "open": "(*", "close": "*", "notIn": ["string"] },
     { "open": "[|", "close": "|", "notIn": ["string"] }
   ],
-  "brackets": [
-    ["{", "}"],
-    ["[", "]"],
-    ["(", ")"],
-    ["[|", "|]"]
-  ],
+  "brackets": [["{", "}"], ["[", "]"], ["(", ")"], ["[|", "|]"]],
   "comments": {
     "blockComment": ["(*", "*)"]
   },
@@ -25,7 +20,7 @@
   ],
   "indentationRules": {
     "decreaseIndentPattern": "^\\s*(end|done|with|in|else)\\b|^\\s*;;",
-    "increaseIndentPattern": "\\b(begin|object)\\s*$|\\blet [a-zA-Z0-9_-]+( [^ ]+)* =\\s*$|method!?[ \\t]+.*=[ \\t]*$|->[ \\t]*$|\\b(for|while)(_lwt)?[ \\t]+.*[ \\t]+do[ \\t]*$|(\\btry(_lwt)?$|\\bif\\s+.*\\sthen$|\\belse|[:=]\\s*sig|=\\s*struct)\\s*$",
+    "increaseIndentPattern": "\\b(begin|object)\\s*$|\\b(let|and)([$&*+\\-/=>@^|<][!?$&*+\\-/=>@^|%:]*)? [a-zA-Z0-9'_-]+( [^ ]+)* =\\s*$|method!?[ \\t]+.*=[ \\t]*$|->[ \\t]*$|\\b(for|while)(_lwt)?[ \\t]+.*[ \\t]+do[ \\t]*$|(\\btry(_lwt)?$|\\bif\\s+.*\\sthen$|\\belse|[:=]\\s*sig|=\\s*struct)\\s*$",
     "indentNextLinePattern": "(?!\\bif.*then.*(else.*|(;|[ \\t]in)[ \\t]*$))\\bif|\\bthen[ \\t]*$|\\belse[ \\t]*$$"
   },
   "onEnterRules": [

package/dist/assets/{ocamllabs.ocaml-platform-1.13.1.vsix/ocamlbuild-68c3ee9d.json → ocamllabs.ocaml-platform-1.16.1.vsix/ocamlbuild2.json}

@@ -2,11 +2,7 @@
   "comments": {
     "lineComment": "#"
   },
-  "brackets": [
-    ["(", ")"],
-    ["{", "}"],
-    ["<", ">"]
-  ],
+  "brackets": [["(", ")"], ["{", "}"], ["<", ">"]],
   "autoClosingPairs": [
     { "open": "(", "close": ")" },
     { "open": "{", "close": "}" },