@codeyam/codeyam-cli 0.1.0-staging.8e7b1bd → 0.1.0-staging.a890816

package/codeyam-cli/templates/{codeyam-setup-skill.md → codeyam-setup.md}

@@ -1,5 +1,5 @@
 ---
-name: CodeYam Setup
+name: codeyam-setup
 autoApprove: true
 description: |
   Use this skill when the user asks to "setup CodeYam" or needs to configure CodeYam for their project.
@@ -7,6 +7,7 @@ description: |
   - Configuring the dev server start command
   - Creating a sandbox to iterate on startup fixes directly
   - Writing universal mocks for dependencies that prevent startup
+  - Identifying and mocking authentication logic that could block simulations
   - Verifying with test-startup at the end
   Use when: User runs `codeyam init` and wants to complete the setup process
 ---
@@ -51,6 +52,18 @@ codeyam validate-mock .codeyam/universal-mocks/{path-to-your-mock}
 
 ## Setup Workflow
 
+### Step 0: Ensure Simulation Infrastructure
+
+Before configuring the dev server or mocks, ensure the simulation infrastructure is installed.
+
+```bash
+codeyam setup-simulations
+```
+
+This is **idempotent** — if already set up, each step is detected and skipped. On first run it installs analyzer dependencies, Playwright chromium, and creates baseline entities (several minutes). Subsequent runs complete in seconds.
+
+If it fails with "No web applications found", the project doesn't support simulations — inform the user and stop.
+
 ### Step 1: Configure Webapp Start Command
 
 **ACTION 1:** Read configuration files:
@@ -277,7 +290,85 @@ This verifies the mocks work correctly in the standard CodeYam flow.
 
 **ALL webapps must pass test-startup before proceeding to Step 4.**
 
-### Step 4: Success
+### Step 4: Identify and Mock Authentication Logic
+
+Even with a successful `test-startup`, authentication logic can block individual component simulations. Proactively search for and mock auth patterns.
+
+**4A. Search for common auth patterns**
+
+Look for these patterns in the codebase:
+
+```bash
+# Auth middleware
+grep -r "middleware" --include="*.ts" --include="*.tsx" | grep -i "auth\|session\|token"
+
+# Auth packages in use
+grep -r "@clerk\|next-auth\|@auth0\|lucia\|passport" package.json
+
+# Auth hooks and HOCs
+grep -rn "useAuth\|useSession\|useUser\|withAuth\|requireAuth" --include="*.ts" --include="*.tsx"
+
+# Route protection patterns
+grep -rn "getServerSideProps.*session\|loader.*auth\|redirect.*login" --include="*.ts" --include="*.tsx"
+```
+
+**4B. Common auth packages that need mocks**
+
+| Package               | Mock Location                         | Key Exports                                                  |
+| --------------------- | ------------------------------------- | ------------------------------------------------------------ |
+| `@clerk/nextjs`       | `node_modules/@clerk/nextjs.ts`       | `auth`, `currentUser`, `ClerkProvider`, `useAuth`, `useUser` |
+| `next-auth`           | `node_modules/next-auth.ts`           | `getServerSession`, `useSession`, `SessionProvider`          |
+| `@auth0/nextjs-auth0` | `node_modules/@auth0/nextjs-auth0.ts` | `getSession`, `withPageAuthRequired`                         |
+| `lucia`               | `node_modules/lucia.ts`               | `Lucia`, `validateRequest`                                   |
+
+**4C. Create auth mocks even if startup succeeded**
+
+For each auth package found, create a universal mock. Example for `@clerk/nextjs`:
+
+```typescript
+// .codeyam/universal-mocks/node_modules/@clerk/nextjs.ts
+export const auth = () => ({
+  userId: null,
+  sessionId: null,
+  getToken: async () => null,
+});
+export const currentUser = async () => null;
+export const useAuth = () => ({
+  isLoaded: true,
+  isSignedIn: false,
+  userId: null,
+});
+export const useUser = () => ({
+  isLoaded: true,
+  isSignedIn: false,
+  user: null,
+});
+export const ClerkProvider = ({ children }: any) => children;
+export const SignedIn = ({ children }: any) => null;
+export const SignedOut = ({ children }: any) => children;
+```
+
+**4D. Check for project-specific auth wrappers**
+
+Many projects wrap auth in local utilities. Search for:
+
+```bash
+grep -rn "export.*auth\|export.*session\|export.*getUser" lib/ utils/ src/lib/ src/utils/ --include="*.ts"
+```
+
+If found (e.g., `lib/auth.ts`), create a mock at `.codeyam/universal-mocks/lib/auth.ts` that returns null/unauthenticated state.
+
+**4E. Validate all auth mocks**
+
+```bash
+codeyam validate-mock .codeyam/universal-mocks/node_modules/@clerk/nextjs.ts
+codeyam validate-mock .codeyam/universal-mocks/lib/auth.ts
+# etc.
+```
+
+**Note:** The goal is to ensure all auth checks return an "unauthenticated" state so components render their logged-out or loading states during simulation.
+
+### Step 5: Success
 
 Once `test-startup` passes for ALL webapps:
 
@@ -340,14 +431,69 @@ export const supabase = {
 } as any;
 ```
 
-### Example: Node Module Mock
+### Example: Node Module Mock (@clerk/nextjs)
 
 For `@clerk/nextjs`, create `.codeyam/universal-mocks/node_modules/@clerk/nextjs.ts`:
 
 ```typescript
-export const auth = () => ({ userId: null, sessionId: null });
+export const auth = () => ({
+  userId: null,
+  sessionId: null,
+  getToken: async () => null,
+});
 export const currentUser = async () => null;
+export const useAuth = () => ({
+  isLoaded: true,
+  isSignedIn: false,
+  userId: null,
+});
+export const useUser = () => ({
+  isLoaded: true,
+  isSignedIn: false,
+  user: null,
+});
 export const ClerkProvider = ({ children }: any) => children;
+export const SignedIn = ({ children }: any) => null;
+export const SignedOut = ({ children }: any) => children;
+```
+
+### Example: Node Module Mock (next-auth)
+
+For `next-auth`, create `.codeyam/universal-mocks/node_modules/next-auth.ts`:
+
+```typescript
+export const getServerSession = async () => null;
+export const useSession = () => ({ data: null, status: 'unauthenticated' });
+export const SessionProvider = ({ children }: any) => children;
+export const signIn = async () => ({ ok: false, error: null });
+export const signOut = async () => ({ url: '/' });
+export default { getServerSession };
+```
+
+For `next-auth/react`, create `.codeyam/universal-mocks/node_modules/next-auth/react.ts`:
+
+```typescript
+export const useSession = () => ({ data: null, status: 'unauthenticated' });
+export const SessionProvider = ({ children }: any) => children;
+export const signIn = async () => ({ ok: false, error: null });
+export const signOut = async () => ({ url: '/' });
+export const getSession = async () => null;
+```
+
+### Example: Node Module Mock (lucia)
+
+For `lucia`, create `.codeyam/universal-mocks/node_modules/lucia.ts`:
+
+```typescript
+export class Lucia {
+  createSession = async () => ({ id: null });
+  validateSession = async () => ({ user: null, session: null });
+  invalidateSession = async () => {};
+  createSessionCookie = () => ({ serialize: () => '' });
+  createBlankSessionCookie = () => ({ serialize: () => '' });
+}
+
+export const validateRequest = async () => ({ user: null, session: null });
 ```
 
 ---
@@ -430,6 +576,7 @@ Setup is complete when:
 - ✅ Sandbox created and all webapps start successfully with fixes applied
 - ✅ All fixes written to `.codeyam/universal-mocks/`
 - ✅ `codeyam test-startup --webappPath <path> --debug` passes for ALL webapps
+- ✅ Authentication logic identified and mocked (even if startup succeeded)
 - ✅ User knows how to use CodeYam (analyze, test)
 
 **CRITICAL:** The startCommand must include `$PORT` in the args (e.g., `["dev", "--port", "$PORT"]`) or env (e.g., `{"PORT": "$PORT"}`). Without this, CodeYam cannot start the server on the required port for capture.

package/codeyam-cli/templates/{codeyam-sim-skill.md → codeyam-sim.md}

@@ -1,5 +1,5 @@
 ---
-name: CodeYam Simulation
+name: codeyam-sim
 autoApprove: true
 description: |
   Use this skill to create interactive simulations of components and functions using CodeYam's analysis.

package/codeyam-cli/templates/{codeyam-test-skill.md → codeyam-test.md}

@@ -1,5 +1,5 @@
 ---
-name: CodeYam Testing
+name: codeyam-test
 autoApprove: true
 description: |
   Use this skill to write comprehensive unit and integration tests using CodeYam's mock generation.

package/codeyam-cli/templates/{codeyam-verify-skill.md → codeyam-verify.md}

@@ -1,5 +1,5 @@
 ---
-name: CodeYam Verify
+name: codeyam-verify
 autoApprove: true
 description: |
   Use this skill after making code changes that impact application functionality.

package/codeyam-cli/templates/editor-step-hook.py

@@ -0,0 +1,145 @@
+#!/usr/bin/env python3
+"""
+PostToolUse + Stop hook for editor mode step tracking.
+
+Reads .codeyam/editor-step.json and prints a reminder about the current step.
+Logs each firing to .codeyam/logs/editor-log.jsonl.
+If no state file exists, outputs nothing (not in editor mode or between features).
+"""
+
+import json
+import os
+import sys
+from datetime import datetime, timezone
+
+
+STEP_LABELS = {
+    1: "Plan",
+    2: "Prototype",
+    3: "Confirm",
+    4: "Deconstruct",
+    5: "Extract",
+    6: "Glossary",
+    7: "Analyze",
+    8: "App Scenarios",
+    9: "User Scenarios",
+    10: "Verify",
+    11: "Review",
+}
+
+STEP_RESTRICTIONS = {
+    1: "Do NOT write any code. Plan and describe only. Wait for user confirmation.",
+    2: "Do NOT create scenarios or run codeyam analyze. Build fast — working prototype with real data.",
+    3: "Present a selection menu (AskUserQuestion) for confirmation. Do NOT refactor or create scenarios until approved.",
+    4: "Do NOT write any code. Read every file, identify all extractable pieces, write a numbered plan. Planning only.",
+    5: "Execute the extraction plan from step 4. Components first (no tests), then library functions via TDD. Page files must contain ZERO direct JSX.",
+    6: "Do NOT write application code or scenarios. Update the glossary only.",
+    7: "Create isolation routes for visual components, run tests for library functions. Register component scenarios via codeyam editor register.",
+    8: "Do NOT modify application code. Create and register app-level scenarios only.",
+    9: "Do NOT modify application code. Create user-persona scenarios only (or skip if no users).",
+    10: "Verify component isolation screenshots AND editor scenarios. After ANY code fix, re-register affected components. Fix only — do NOT add features.",
+    11: "Verify ALL screenshots exist and NO client-side errors (/api/editor-client-errors), then present selection menu (AskUserQuestion): Save or make changes.",
+}
+
+
+def log_event(project_dir, event, data=None):
+    """Append a JSONL entry to .codeyam/logs/editor-log.jsonl."""
+    try:
+        logs_dir = os.path.join(project_dir, ".codeyam", "logs")
+        os.makedirs(logs_dir, exist_ok=True)
+        log_path = os.path.join(logs_dir, "editor-log.jsonl")
+        entry = {"ts": datetime.now(timezone.utc).isoformat(), "event": event}
+        if data:
+            entry.update(data)
+        with open(log_path, "a") as f:
+            f.write(json.dumps(entry) + "\n")
+    except Exception:
+        pass  # Logging is best-effort
+
+
+def detect_event():
+    """Detect whether this is a PostToolUse or Stop hook from stdin."""
+    try:
+        raw = sys.stdin.read()
+        if not raw.strip():
+            return "unknown", {}
+        data = json.loads(raw)
+        # PostToolUse has tool_name; Stop has stop_hook_active
+        if "tool_name" in data:
+            return "post_tool_use", data
+        elif "stop_hook_active" in data:
+            return "stop", data
+        return "unknown", data
+    except Exception:
+        return "unknown", {}
+
+
+def main():
+    project_dir = os.environ.get("CLAUDE_PROJECT_DIR", os.getcwd())
+    state_path = os.path.join(project_dir, ".codeyam", "editor-step.json")
+
+    if not os.path.exists(state_path):
+        return
+
+    try:
+        with open(state_path, "r") as f:
+            state = json.load(f)
+    except (json.JSONDecodeError, IOError):
+        return
+
+    step = state.get("step")
+    label = state.get("label", "Unknown")
+    feature = state.get("feature", "")
+
+    if not step:
+        return
+
+    event_type, event_data = detect_event()
+
+    # Log the hook firing
+    log_data = {"step": step, "label": label, "feature": feature, "hook": event_type}
+    if event_type == "post_tool_use":
+        log_data["tool"] = event_data.get("tool_name", "")
+    log_event(project_dir, "hook", log_data)
+
+    restriction = STEP_RESTRICTIONS.get(step, "")
+    next_cmd = f"codeyam editor {step + 1}" if step < 11 else "codeyam editor 1"
+
+    lines = [
+        f'Editor Mode \u2014 Step {step} ({label}): "{feature}"',
+    ]
+    if restriction:
+        lines.append(restriction)
+
+    if event_type == "stop":
+        # Build colored progress tracker using ANSI escape codes
+        GREEN = "\033[32m"
+        BOLD_CYAN = "\033[1;36m"
+        DIM = "\033[2m"
+        RESET = "\033[0m"
+        tracker = [f"{DIM}  \u250c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2510{RESET}"]
+        for i in range(1, 12):
+            lbl = STEP_LABELS[i].ljust(28)
+            num = f" {i}" if i < 10 else f"{i}"
+            content = f"{num}. {lbl}"
+            if i < step:
+                tracker.append(f"{DIM}  \u2502{RESET}{GREEN}  \u2713  {content}{RESET}{DIM}\u2502{RESET}")
+            elif i == step:
+                tracker.append(f"{DIM}  \u2502{RESET}{BOLD_CYAN}  \u2192  {content}{RESET}{DIM}\u2502{RESET}")
+            else:
+                tracker.append(f"{DIM}  \u2502  \u25cb  {content}\u2502{RESET}")
+        tracker.append(f"{DIM}  \u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518{RESET}")
+        lines.append("Present this progress tracker to the user (copy verbatim):")
+        lines.extend(tracker)
+        lines.append(
+            "For the CURRENT step (\u2192), show each checklist item with "
+            "\u2713 (done) or \u2717 (skipped + reason)."
+        )
+
+    lines.append(f"When this step is complete, run: {next_cmd}")
+
+    print("\n".join(lines))
+
+
+if __name__ == "__main__":
+    main()

package/codeyam-cli/templates/hooks/staleness-check.sh

@@ -0,0 +1,43 @@
+#!/bin/bash
+# Staleness check hook - runs after file edits to check if related rules need review
+# Receives JSON input via stdin with tool info
+
+set -e
+
+# Read the input JSON
+INPUT=$(cat)
+
+# Extract the file path that was edited
+FILE_PATH=$(echo "$INPUT" | jq -r '.tool_input.file_path // .tool_input.path // empty' 2>/dev/null)
+
+if [ -z "$FILE_PATH" ]; then
+  exit 0  # No file path, nothing to check
+fi
+
+# Find rules that match this file path
+RULES_DIR="${CLAUDE_PROJECT_DIR}/.claude/rules"
+
+if [ ! -d "$RULES_DIR" ]; then
+  exit 0  # No rules directory
+fi
+
+# Search for rules whose paths might match the edited file
+MATCHING_RULES=""
+while IFS= read -r -d '' rule_file; do
+  # Extract paths from frontmatter
+  PATHS=$(sed -n '/^---$/,/^---$/p' "$rule_file" | grep -E "^\s*-\s*'" | sed "s/.*'\(.*\)'.*/\1/")
+
+  for pattern in $PATHS; do
+    # Simple check if the file might match the pattern
+    if [[ "$FILE_PATH" == *"${pattern%%\**}"* ]]; then
+      MATCHING_RULES="$MATCHING_RULES\n- $(basename "$rule_file")"
+      break
+    fi
+  done
+done < <(find "$RULES_DIR" -name "*.md" -print0 2>/dev/null)
+
+if [ -n "$MATCHING_RULES" ]; then
+  echo "📋 Modified file may have related rules that need review:$MATCHING_RULES"
+fi
+
+exit 0

package/codeyam-cli/templates/isolation-route/next-app.tsx.template

@@ -0,0 +1,80 @@
+/**
+ * CodeYam Isolation Route — Next.js App Router
+ *
+ * Place this file at: app/__codeyam__/[component]/[scenario]/page.tsx
+ *
+ * This route dynamically imports a component and renders it with mock data
+ * from the specified scenario, enabling isolated component preview.
+ *
+ * Usage: http://localhost:3000/__codeyam__/TaskCard/Default
+ */
+'use client';
+
+import { useEffect, useState } from 'react';
+import { useParams } from 'next/navigation';
+
+interface ScenarioData {
+  mockData: Record<string, unknown>;
+}
+
+export default function CodeYamIsolationPage() {
+  const params = useParams();
+  const componentName = params.component as string;
+  const scenarioSlug = params.scenario as string;
+
+  const [Component, setComponent] = useState<React.ComponentType<any> | null>(null);
+  const [mockData, setMockData] = useState<Record<string, unknown> | null>(null);
+  const [error, setError] = useState<string | null>(null);
+
+  useEffect(() => {
+    async function loadComponent() {
+      try {
+        // Fetch scenario data from CodeYam API
+        const res = await fetch(
+          `http://localhost:${process.env.NEXT_PUBLIC_CODEYAM_PORT || '3111'}/api/editor-scenario-data?component=${componentName}&scenario=${scenarioSlug}`
+        );
+        if (res.ok) {
+          const data: ScenarioData = await res.json();
+          setMockData(data.mockData);
+        }
+
+        // Try to dynamically import the component
+        // Claude should update this mapping when adding new components
+        const componentModules: Record<string, () => Promise<any>> = {
+          // Example: 'TaskCard': () => import('@/components/TaskCard'),
+        };
+
+        const loader = componentModules[componentName];
+        if (loader) {
+          const mod = await loader();
+          setComponent(() => mod.default || mod[componentName]);
+        } else {
+          setError(`Component "${componentName}" not registered in isolation route`);
+        }
+      } catch (err) {
+        setError(`Failed to load component: ${err}`);
+      }
+    }
+
+    void loadComponent();
+  }, [componentName, scenarioSlug]);
+
+  if (error) {
+    return (
+      <div style={{ padding: 24, fontFamily: 'monospace', color: '#e74c3c' }}>
+        <h2>CodeYam Isolation Error</h2>
+        <p>{error}</p>
+      </div>
+    );
+  }
+
+  if (!Component || !mockData) {
+    return (
+      <div style={{ padding: 24, fontFamily: 'monospace', color: '#666' }}>
+        Loading {componentName} / {scenarioSlug}...
+      </div>
+    );
+  }
+
+  return <Component {...mockData} />;
+}

package/codeyam-cli/templates/isolation-route/next-pages.tsx.template

@@ -0,0 +1,79 @@
+/**
+ * CodeYam Isolation Route — Next.js Pages Router
+ *
+ * Place this file at: pages/__codeyam__/[component]/[scenario].tsx
+ *
+ * This route dynamically imports a component and renders it with mock data
+ * from the specified scenario, enabling isolated component preview.
+ *
+ * Usage: http://localhost:3000/__codeyam__/TaskCard/Default
+ */
+import { useRouter } from 'next/router';
+import { useEffect, useState } from 'react';
+
+interface ScenarioData {
+  mockData: Record<string, unknown>;
+}
+
+export default function CodeYamIsolationPage() {
+  const router = useRouter();
+  const { component: componentName, scenario: scenarioSlug } = router.query;
+
+  const [Component, setComponent] = useState<React.ComponentType<any> | null>(null);
+  const [mockData, setMockData] = useState<Record<string, unknown> | null>(null);
+  const [error, setError] = useState<string | null>(null);
+
+  useEffect(() => {
+    if (!componentName || !scenarioSlug) return;
+
+    async function loadComponent() {
+      try {
+        // Fetch scenario data from CodeYam API
+        const res = await fetch(
+          `http://localhost:${process.env.NEXT_PUBLIC_CODEYAM_PORT || '3111'}/api/editor-scenario-data?component=${componentName}&scenario=${scenarioSlug}`
+        );
+        if (res.ok) {
+          const data: ScenarioData = await res.json();
+          setMockData(data.mockData);
+        }
+
+        // Try to dynamically import the component
+        // Claude should update this mapping when adding new components
+        const componentModules: Record<string, () => Promise<any>> = {
+          // Example: 'TaskCard': () => import('../components/TaskCard'),
+        };
+
+        const loader = componentModules[componentName as string];
+        if (loader) {
+          const mod = await loader();
+          setComponent(() => mod.default || mod[componentName as string]);
+        } else {
+          setError(`Component "${componentName}" not registered in isolation route`);
+        }
+      } catch (err) {
+        setError(`Failed to load component: ${err}`);
+      }
+    }
+
+    void loadComponent();
+  }, [componentName, scenarioSlug]);
+
+  if (error) {
+    return (
+      <div style={{ padding: 24, fontFamily: 'monospace', color: '#e74c3c' }}>
+        <h2>CodeYam Isolation Error</h2>
+        <p>{error}</p>
+      </div>
+    );
+  }
+
+  if (!Component || !mockData) {
+    return (
+      <div style={{ padding: 24, fontFamily: 'monospace', color: '#666' }}>
+        Loading {componentName} / {scenarioSlug}...
+      </div>
+    );
+  }
+
+  return <Component {...mockData} />;
+}

package/codeyam-cli/templates/isolation-route/vite-react.tsx.template

@@ -0,0 +1,78 @@
+/**
+ * CodeYam Isolation Route — Vite + React
+ *
+ * Add this route to your React Router config.
+ * For example, in your router setup:
+ *   { path: '/__codeyam__/:component/:scenario', element: <CodeYamIsolation /> }
+ *
+ * Usage: http://localhost:5173/__codeyam__/TaskCard/Default
+ */
+import { useParams } from 'react-router-dom';
+import { useEffect, useState } from 'react';
+
+interface ScenarioData {
+  mockData: Record<string, unknown>;
+}
+
+export default function CodeYamIsolation() {
+  const { component: componentName, scenario: scenarioSlug } = useParams();
+
+  const [Component, setComponent] = useState<React.ComponentType<any> | null>(null);
+  const [mockData, setMockData] = useState<Record<string, unknown> | null>(null);
+  const [error, setError] = useState<string | null>(null);
+
+  useEffect(() => {
+    if (!componentName || !scenarioSlug) return;
+
+    async function loadComponent() {
+      try {
+        // Fetch scenario data from CodeYam API
+        const codeyamPort = import.meta.env.VITE_CODEYAM_PORT || '3111';
+        const res = await fetch(
+          `http://localhost:${codeyamPort}/api/editor-scenario-data?component=${componentName}&scenario=${scenarioSlug}`
+        );
+        if (res.ok) {
+          const data: ScenarioData = await res.json();
+          setMockData(data.mockData);
+        }
+
+        // Try to dynamically import the component
+        // Claude should update this mapping when adding new components
+        const componentModules: Record<string, () => Promise<any>> = {
+          // Example: 'TaskCard': () => import('./components/TaskCard'),
+        };
+
+        const loader = componentModules[componentName];
+        if (loader) {
+          const mod = await loader();
+          setComponent(() => mod.default || mod[componentName]);
+        } else {
+          setError(`Component "${componentName}" not registered in isolation route`);
+        }
+      } catch (err) {
+        setError(`Failed to load component: ${err}`);
+      }
+    }
+
+    void loadComponent();
+  }, [componentName, scenarioSlug]);
+
+  if (error) {
+    return (
+      <div style={{ padding: 24, fontFamily: 'monospace', color: '#e74c3c' }}>
+        <h2>CodeYam Isolation Error</h2>
+        <p>{error}</p>
+      </div>
+    );
+  }
+
+  if (!Component || !mockData) {
+    return (
+      <div style={{ padding: 24, fontFamily: 'monospace', color: '#666' }}>
+        Loading {componentName} / {scenarioSlug}...
+      </div>
+    );
+  }
+
+  return <Component {...mockData} />;
+}