@cobo/cobo-waas2 1.2.1 → 1.4.0

package/docs/TransactionDepositToAddressDestination.md

@@ -10,6 +10,6 @@ Name | Type | Description | Notes
 **wallet_subtype** | [**WalletSubtype**](WalletSubtype.md) |  | [optional] 
 **address** | **String** | The destination address. | 
 **memo** | **String** | The memo that identifies a transaction in order to credit the correct account. For transfers out of Cobo Portal, it is highly recommended to include a memo for the chains such as XRP, EOS, XLM, IOST, BNB_BNB, ATOM, LUNA, and TON. | [optional] 
-**amount** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | 
+**amount** | **String** | The transfer amount. For example, if you trade 1.5 BTC, then the value is `1.5`.  | 
 
 

package/docs/TransactionDepositToWalletDestination.md

@@ -10,6 +10,6 @@ Name | Type | Description | Notes
 **wallet_subtype** | [**WalletSubtype**](WalletSubtype.md) |  | 
 **trading_account_type** | **String** | The trading account type. | [optional] 
 **exchange_id** | [**ExchangeId**](ExchangeId.md) |  | [optional] 
-**amount** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | 
+**amount** | **String** | The transfer amount. For example, if you trade 1.5 BTC, then the value is `1.5`.  | 
 
 

package/docs/TransactionDestination.md

@@ -13,10 +13,10 @@ Name | Type | Description | Notes
 **wallet_id** | **String** | The wallet ID. | 
 **trading_account_type** | **String** | The trading account type. | [optional] 
 **exchange_id** | [**ExchangeId**](ExchangeId.md) |  | [optional] 
-**amount** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | 
+**amount** | **String** | The transfer amount. For example, if you trade 1.5 BTC, then the value is `1.5`.  | 
 **address** | **String** | The destination address. | 
 **value** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | [optional] 
-**calldata** | **Blob** | The data that is used to invoke a specific function or method within the specified contract at the destination address.  | 
+**calldata** | **String** | The data that is used to invoke a specific function or method within the specified contract at the destination address.  | 
 **message** | **String** | The raw data of the message to be signed, encoded in Base64 format. | 
 **structured_data** | **{String: Object}** | The structured data to be signed, formatted as a JSON object according to the EIP-712 standard. | 
 **wallet_type** | [**WalletType**](WalletType.md) |  | 

package/docs/TransactionEvmContractDestination.md

@@ -7,6 +7,6 @@ Name | Type | Description | Notes
 **destination_type** | [**TransactionDestinationType**](TransactionDestinationType.md) |  | 
 **address** | **String** | The destination address. | 
 **value** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | [optional] 
-**calldata** | **Blob** | The data that is used to invoke a specific function or method within the specified contract at the destination address.  | 
+**calldata** | **String** | The data that is used to invoke a specific function or method within the specified contract at the destination address.  | 
 
 

package/docs/TransactionStatus.md

@@ -9,8 +9,6 @@
 
 * `PendingAuthorization` (value: `"PendingAuthorization"`)
 
-* `Queued` (value: `"Queued"`)
-
 * `PendingSignature` (value: `"PendingSignature"`)
 
 * `Broadcasting` (value: `"Broadcasting"`)

package/docs/TransactionSubStatus.md

@@ -5,8 +5,6 @@
 
 * `RejectedKYT` (value: `"RejectedKYT"`)
 
-* `RejectedTravelRule` (value: `"RejectedTravelRule"`)
-
 * `PendingDoubleCheck` (value: `"PendingDoubleCheck"`)
 
 * `PendingSpenderCheck` (value: `"PendingSpenderCheck"`)
@@ -39,6 +37,8 @@
 
 * `FailedOnChain` (value: `"FailedOnChain"`)
 
+* `Reverting` (value: `"Reverting"`)
+
 * `Queue` (value: `"Queue"`)
 
 * `PendingBlockConfirmations` (value: `"PendingBlockConfirmations"`)
@@ -51,6 +51,20 @@
 
 * `OnchainRejection` (value: `"OnchainRejection"`)
 
+* `RejectedTravelRule` (value: `"RejectedTravelRule"`)
+
+* `RejectedTravelRuleDueToCompliance` (value: `"RejectedTravelRuleDueToCompliance"`)
+
+* `PendingTravelRuleInfo` (value: `"PendingTravelRuleInfo"`)
+
+* `PendingTravelRuleCheck` (value: `"PendingTravelRuleCheck"`)
+
+* `RejectedTravelRuleDueToUnsupportedToken` (value: `"RejectedTravelRuleDueToUnsupportedToken"`)
+
+* `SignatureVerificationSuccess` (value: `"SignatureVerificationSuccess"`)
+
+* `SignatureVerificationFailed` (value: `"SignatureVerificationFailed"`)
+
 * `unknown_default_open_api` (value: `"unknown_default_open_api"`)
 
 

package/docs/TransactionTokeApproval.md

@@ -15,6 +15,8 @@ Name | Type | Description | Notes
 **fee_token_id** | **String** | The fee token ID. A fee token is the token with which you pay transaction fees. | [optional] 
 **can_deposit** | **Boolean** | Whether deposits are enabled for this token. | [optional] 
 **can_withdraw** | **Boolean** | Whether withdrawals are enabled for this token. | [optional] 
+**dust_threshold** | **String** | The minimum withdrawal amount for Custodial Wallets. If your withdrawal amount is smaller than this threshold, the withdrawal request will receive an error.  Note: [Loop transfers](https://loop.top/) do not have this limitation.  | [optional] 
+**custodial_minimum_deposit_threshold** | **String** | The minimum deposit amount for Custodial Wallets. If the amount you deposit to a Custodial Wallet is smaller than this threshold, the deposit will not show up on Cobo Portal or trigger any webhook events.  Note: [Loop transfers](https://loop.top/) do not have this limitation.  | [optional] 
 **amount** | **Number** | Transaction value (Note that this is an absolute value. If you trade 1.5 BTC, then the value is 1.5)  | [optional] 
 **spender** | **String** | Spender address | [optional] 
 

package/docs/TransactionTransferToAddressDestinationAccountOutput.md

@@ -6,6 +6,6 @@ Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **address** | **String** | The destination address. | [optional] 
 **memo** | **String** | The memo that identifies a transaction in order to credit the correct account. For transfers out of Cobo Portal, it is highly recommended to include a memo for the chains such as XRP, EOS, XLM, IOST, BNB_BNB, ATOM, LUNA, and TON. | [optional] 
-**amount** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | [optional] 
+**amount** | **String** | The transfer amount. For example, if you trade 1.5 BTC, then the value is `1.5`.  | [optional] 
 
 

package/docs/TransactionTransferToAddressDestinationUtxoOutputsInner.md

@@ -5,7 +5,7 @@
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **address** | **String** | The destination address. | [optional] 
-**amount** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | [optional] 
+**amount** | **String** | The transfer amount. For example, if you trade 1.5 BTC, then the value is `1.5`.  | [optional] 
 **script** | **String** | The script of the output. It is a programmable code fragment that defines the conditions under which the UTXO can be spent. | [optional] 
 
 

package/docs/TransactionTransferToWalletDestination.md

@@ -8,6 +8,6 @@ Name | Type | Description | Notes
 **wallet_id** | **String** | The wallet ID. | 
 **trading_account_type** | **String** | The trading account type. | [optional] 
 **exchange_id** | [**ExchangeId**](ExchangeId.md) |  | [optional] 
-**amount** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | 
+**amount** | **String** | The transfer amount. For example, if you trade 1.5 BTC, then the value is `1.5`.  | 
 
 

package/docs/TransactionType.md

@@ -13,6 +13,10 @@
 
 * `ExternalSafeTx` (value: `"ExternalSafeTx"`)
 
+* `Stake` (value: `"Stake"`)
+
+* `Unstake` (value: `"Unstake"`)
+
 * `unknown_default_open_api` (value: `"unknown_default_open_api"`)
 
 

package/docs/TransactionsApi.md

@@ -4,7 +4,9 @@ All URIs are relative to *https://api.dev.cobo.com/v2*
 
 Method | HTTP request | Description
 ------------- | ------------- | -------------
+[**broadcastSignedTransactions**](TransactionsApi.md#broadcastSignedTransactions) | **POST** /transactions/broadcast | Broadcast signed transactions
 [**cancelTransactionById**](TransactionsApi.md#cancelTransactionById) | **POST** /transactions/{transaction_id}/cancel | Cancel transaction
+[**checkLoopTransfers**](TransactionsApi.md#checkLoopTransfers) | **GET** /transactions/check_loop_transfers | Check Loop transfers
 [**createContractCallTransaction**](TransactionsApi.md#createContractCallTransaction) | **POST** /transactions/contract_call | Call smart contract
 [**createMessageSignTransaction**](TransactionsApi.md#createMessageSignTransaction) | **POST** /transactions/message_sign | Sign message
 [**createTransferTransaction**](TransactionsApi.md#createTransferTransaction) | **POST** /transactions/transfer | Transfer token
@@ -17,6 +19,58 @@ Method | HTTP request | Description
 
 
 
+## broadcastSignedTransactions
+
+> [BroadcastSignedTransactions201ResponseInner] broadcastSignedTransactions(opts)
+
+Broadcast signed transactions
+
+<Note>This operation is only applicable to the staking scenarios.</Note> This operation broadcasts a list of signed transactions.   If you set `auto_broadcast` to `false` when [creating a staking activity](/v2/api-references/staking/create-stake-activity), the transaction will not be submitted to the blockchain automatically after being signed. In such cases, you can call this operation to broadcast the transaction to the blockchain.  A transaction can only be broadcast if its status is `Broadcasting`. 
+
+### Example
+
+```javascript
+const CoboWaas2 = require('@cobo/cobo-waas2');
+// Initialize the API client
+const apiClient = CoboWaas2.ApiClient.instance
+// Select the development environment. To use the production environment, replace `Env.DEV` with `Env.PROD`
+apiClient.setEnv(CoboWaas2.Env.DEV);
+// Replace `<YOUR_PRIVATE_KEY>` with your private key
+apiClient.setPrivateKey("<YOUR_PRIVATE_KEY>");
+// Call the API
+const apiInstance = new CoboWaas2.TransactionsApi();
+const opts = {
+  'BroadcastSignedTransactionsRequest': new CoboWaas2.BroadcastSignedTransactionsRequest()
+};
+apiInstance.broadcastSignedTransactions(opts).then((data) => {
+  console.log('API called successfully. Returned data: ' + data);
+}, (error) => {
+  console.error(error);
+});
+
+```
+
+### Parameters
+
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **BroadcastSignedTransactionsRequest** | [**BroadcastSignedTransactionsRequest**](BroadcastSignedTransactionsRequest.md)| The request body to broadcast a list of signed transactions. | [optional] 
+
+### Return type
+
+[**[BroadcastSignedTransactions201ResponseInner]**](BroadcastSignedTransactions201ResponseInner.md)
+
+### Authorization
+
+[CoboAuth](../README.md#CoboAuth)
+
+### HTTP request headers
+
+- **Content-Type**: application/json
+- **Accept**: application/json
+
+
 ## cancelTransactionById
 
 > CreateTransferTransaction201Response cancelTransactionById(transaction_id)
@@ -67,6 +121,60 @@ Name | Type | Description  | Notes
 - **Accept**: application/json
 
 
+## checkLoopTransfers
+
+> [CheckLoopTransfers200ResponseInner] checkLoopTransfers(token_id, source_wallet_id, destination_addresses)
+
+Check Loop transfers
+
+This operation verifies if the transactions from a given source wallet to a list of given destinations can be executed as Loop transfers.   For more information about Loop, see [Loop&#39;s website](https://loop.top/). 
+
+### Example
+
+```javascript
+const CoboWaas2 = require('@cobo/cobo-waas2');
+// Initialize the API client
+const apiClient = CoboWaas2.ApiClient.instance
+// Select the development environment. To use the production environment, replace `Env.DEV` with `Env.PROD`
+apiClient.setEnv(CoboWaas2.Env.DEV);
+// Replace `<YOUR_PRIVATE_KEY>` with your private key
+apiClient.setPrivateKey("<YOUR_PRIVATE_KEY>");
+// Call the API
+const apiInstance = new CoboWaas2.TransactionsApi();
+const token_id = "ETH_USDT";
+const source_wallet_id = "f47ac10b-58cc-4372-a567-0e02b2c3d479";
+const destination_addresses = "0xd8dA6BF26964aF9D7eEd9e03E53415D37aA96045,0x4838B106FCe9647Bdf1E7877BF73cE8B0BAD5f97";
+apiInstance.checkLoopTransfers(token_id, source_wallet_id, destination_addresses).then((data) => {
+  console.log('API called successfully. Returned data: ' + data);
+}, (error) => {
+  console.error(error);
+});
+
+```
+
+### Parameters
+
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **token_id** | **String**| The token ID, which is the unique identifier of a token. You can retrieve the IDs of all the tokens you can use by calling [List enabled tokens](/v2/api-references/wallets/list-enabled-tokens). | 
+ **source_wallet_id** | **String**| The wallet ID of the transaction source. | 
+ **destination_addresses** | **String**| A list of destination addresses, separated by comma. | 
+
+### Return type
+
+[**[CheckLoopTransfers200ResponseInner]**](CheckLoopTransfers200ResponseInner.md)
+
+### Authorization
+
+[CoboAuth](../README.md#CoboAuth)
+
+### HTTP request headers
+
+- **Content-Type**: Not defined
+- **Accept**: application/json
+
+
 ## createContractCallTransaction
 
 > CreateTransferTransaction201Response createContractCallTransaction(opts)
@@ -155,7 +263,7 @@ apiInstance.createMessageSignTransaction(opts).then((data) => {
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **MessageSignParams** | [**MessageSignParams**](MessageSignParams.md)| The request body to create a message sign transaction | [optional] 
+ **MessageSignParams** | [**MessageSignParams**](MessageSignParams.md)| The request body to create a message signing transaction | [optional] 
 
 ### Return type
 
@@ -229,7 +337,7 @@ Name | Type | Description  | Notes
 
 Drop transaction
 
-This operation drops a specified transaction.   Dropping a transaction will trigger an Replace-By-Fee (RBF) transaction which is a new version of the original transaction. It has a higher transaction fee to incentivize miners to prioritize its confirmation over the original one. A transaction can be dropped if its status is &#x60;Broadcasting&#x60;.  &lt;ul&gt; &lt;li&gt;For EVM chains, this RBF transaction has a transfer amount of &#x60;0&#x60; and the sending address is the same as the receiving address.&lt;/li&gt; &lt;li&gt;For UTXO chains, this RBF transaction has a transfer amount of &#x60;0&#x60; and the destination address is the same as the change address in the original transaction.&lt;/li&gt; &lt;/ul&gt;  A transaction request for tracking is returned upon successful operation.  &lt;Note&gt;This operation only applies to transactions from MPC Wallets and Smart Contract Wallets. It does not apply to transactions on the following chains: VET, TRON, TVET, SOL, and TON.&lt;/Note&gt;  &lt;Info&gt;If you drop a transaction from a Smart Contract Wallet, two RBF transactions will be triggered, one for the transaction from the Smart Contract Wallet, and the other for the transaction from the Delegate.&lt;/Info&gt; 
+This operation drops a specified transaction.   Dropping a transaction will trigger a Replace-By-Fee (RBF) transaction which is a new version of the original transaction. It has a higher transaction fee to incentivize miners to prioritize its confirmation over the original one. A transaction can be dropped if its status is &#x60;Broadcasting&#x60;.  &lt;ul&gt; &lt;li&gt;For EVM chains, this RBF transaction has a transfer amount of &#x60;0&#x60; and the sending address is the same as the receiving address.&lt;/li&gt; &lt;li&gt;For UTXO chains, this RBF transaction has a transfer amount of &#x60;0&#x60; and the destination address is the same as the change address in the original transaction.&lt;/li&gt; &lt;/ul&gt;  A transaction request for tracking is returned upon successful operation.  &lt;Note&gt;This operation only applies to transactions from MPC Wallets and Smart Contract Wallets. It does not apply to transactions on the following chains: VET, TRON, TVET, SOL, and TON.&lt;/Note&gt;  &lt;Info&gt;If you drop a transaction from a Smart Contract Wallet, two RBF transactions will be triggered, one for the transaction from the Smart Contract Wallet, and the other for the transaction from the Delegate.&lt;/Info&gt; 
 
 ### Example
 
@@ -523,7 +631,7 @@ Name | Type | Description  | Notes
 
 Speed up transaction
 
-This operation accelerates a specified transaction.   Speeding up a transaction will trigger an Replace-By-Fee (RBF) transaction which is a new version of the original transaction. It shares the same inputs but has a higher transaction fee to incentivize miners to prioritize its confirmation over the previous one. A transaction can be accelerated if its status is &#x60;Broadcasting&#x60;.  A transaction request for tracking is returned upon successful operation.  &lt;Note&gt;This operation only applies to transactions from MPC Wallets and Smart Contract Wallets. It does not apply to transactions on the following chains: VET, TRON, TVET, SOL, and TON.&lt;/Note&gt;  &lt;Info&gt;If you speed up a transaction from a Smart Contract Wallet, two RBF transactions will be triggered, one for the transaction from the Smart Contract Wallet, and the other for the transaction from the Delegate.&lt;/Info&gt; 
+This operation accelerates a specified transaction.   Speeding up a transaction will trigger a Replace-By-Fee (RBF) transaction which is a new version of the original transaction. It shares the same inputs but has a higher transaction fee to incentivize miners to prioritize its confirmation over the previous one. A transaction can be accelerated if its status is &#x60;Broadcasting&#x60;.  A transaction request for tracking is returned upon successful operation.  &lt;Note&gt;This operation only applies to transactions from MPC Wallets and Smart Contract Wallets. It does not apply to transactions on the following chains: VET, TRON, TVET, SOL, and TON.&lt;/Note&gt;  &lt;Info&gt;If you speed up a transaction from a Smart Contract Wallet, two RBF transactions will be triggered, one for the transaction from the Smart Contract Wallet, and the other for the transaction from the Delegate.&lt;/Info&gt; 
 
 ### Example
 

package/docs/TransferDestination.md

@@ -8,10 +8,10 @@ Name | Type | Description | Notes
 **account_output** | [**AddressTransferDestinationAccountOutput**](AddressTransferDestinationAccountOutput.md) |  | [optional] 
 **utxo_outputs** | [**[AddressTransferDestinationUtxoOutputsInner]**](AddressTransferDestinationUtxoOutputsInner.md) |  | [optional] 
 **change_address** | **String** | The address used to receive the remaining funds or change from the transaction. | [optional] 
-**force_internal** | **Boolean** | Whether the transaction request must be executed as a Loop transfer. For more information about Loop, see [Loop's website](https://loop.top/).   - `true`: The transaction request must be executed as a Loop transfer.   - `false`: The transaction request may not be executed as a Loop transfer. <Note>Please do not set both `force_internal` and `force_internal` as `true`.</Note>  | [optional] 
-**force_external** | **Boolean** | Whether the transaction request must not be executed as a Loop transfer. For more information about Loop, see [Loop's website](https://loop.top/).   - `true`: The transaction request must not be executed as a Loop transfer.   - `false`: The transaction request can be executed as a Loop transfer. <Note>Please do not set both `force_internal` and `force_internal` as `true`.</Note>  | [optional] 
+**force_internal** | **Boolean** | Whether the transaction request must be executed as a Loop transfer. For more information about Loop, see [Loop's website](https://loop.top/).   - `true`: The transaction request must be executed as a Loop transfer.   - `false`: The transaction request may not be executed as a Loop transfer.    Please do not set both `force_internal` and `force_internal` as `true`.  | [optional] 
+**force_external** | **Boolean** | Whether the transaction request must not be executed as a Loop transfer. For more information about Loop, see [Loop's website](https://loop.top/).   - `true`: The transaction request must not be executed as a Loop transfer.   - `false`: The transaction request can be executed as a Loop transfer.  Please do not set both `force_internal` and `force_internal` as `true`.  | [optional] 
 **wallet_id** | **String** | The wallet ID. | 
 **trading_account_type** | **String** | The trading account type. | 
-**amount** | **String** | The transfer amount. For example, if you trade 1.5 ETH, then the value is `1.5`.  | 
+**amount** | **String** | The transfer amount. For example, if you trade 1.5 BTC, then the value is `1.5`.  | 
 
 

package/docs/WalletBalanceSnapshot.md

@@ -0,0 +1,10 @@
+# CoboWaas2.WalletBalanceSnapshot
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**snapshot_id** | **Number** | The snapshot ID. | 
+**snapshot_name** | **String** | The snapshot name. | [optional] 
+
+

package/docs/WalletBalanceSnapshotRecord.md

@@ -0,0 +1,13 @@
+# CoboWaas2.WalletBalanceSnapshotRecord
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**wallet_id** | **String** | The wallet ID. | 
+**wallet_type** | [**WalletType**](WalletType.md) |  | [optional] 
+**wallet_name** | **String** | The wallet name. | [optional] 
+**token_id** | **String** | The token ID, which is the unique identifier of a token. You can retrieve the IDs of all the tokens you can use by calling [List enabled tokens](/v2/api-references/wallets/list-enabled-tokens). | 
+**balance** | **String** | The balance of the token. | 
+
+

package/docs/WalletsApi.md

@@ -6,7 +6,6 @@ Method | HTTP request | Description
 ------------- | ------------- | -------------
 [**checkAddressValidity**](WalletsApi.md#checkAddressValidity) | **GET** /wallets/check_address_validity | Check address validity
 [**checkAddressesValidity**](WalletsApi.md#checkAddressesValidity) | **GET** /wallets/check_addresses_validity | Check addresses validity
-[**checkLoopTransfers**](WalletsApi.md#checkLoopTransfers) | **GET** /wallets/check_loop_transfers | Check Loop transfers
 [**createAddress**](WalletsApi.md#createAddress) | **POST** /wallets/{wallet_id}/addresses | Create addresses in wallet
 [**createWallet**](WalletsApi.md#createWallet) | **POST** /wallets | Create wallet
 [**deleteWalletById**](WalletsApi.md#deleteWalletById) | **POST** /wallets/{wallet_id}/delete | Delete wallet
@@ -134,60 +133,6 @@ Name | Type | Description  | Notes
 - **Accept**: application/json
 
 
-## checkLoopTransfers
-
-> [CheckLoopTransfers200ResponseInner] checkLoopTransfers(token_id, source_wallet_id, destination_addresses)
-
-Check Loop transfers
-
-This operation verifies if the transactions from a given source wallet to a list of destination addresses can be executed as Loop transfers.   For more information about Loop, see [Loop's website](https://loop.top/). 
-
-### Example
-
-```javascript
-const CoboWaas2 = require('@cobo/cobo-waas2');
-// Initialize the API client
-const apiClient = CoboWaas2.ApiClient.instance
-// Select the development environment. To use the production environment, replace `Env.DEV` with `Env.PROD`
-apiClient.setEnv(CoboWaas2.Env.DEV);
-// Replace `<YOUR_PRIVATE_KEY>` with your private key
-apiClient.setPrivateKey("<YOUR_PRIVATE_KEY>");
-// Call the API
-const apiInstance = new CoboWaas2.WalletsApi();
-const token_id = "ETH_USDT";
-const source_wallet_id = "f47ac10b-58cc-4372-a567-0e02b2c3d479";
-const destination_addresses = "0xd8dA6BF26964aF9D7eEd9e03E53415D37aA96045,0x4838B106FCe9647Bdf1E7877BF73cE8B0BAD5f97";
-apiInstance.checkLoopTransfers(token_id, source_wallet_id, destination_addresses).then((data) => {
-  console.log('API called successfully. Returned data: ' + data);
-}, (error) => {
-  console.error(error);
-});
-
-```
-
-### Parameters
-
-
-Name | Type | Description  | Notes
-------------- | ------------- | ------------- | -------------
- **token_id** | **String**| The token ID, which is the unique identifier of a token. You can retrieve the IDs of all the tokens you can use by calling [List enabled tokens](/v2/api-references/wallets/list-enabled-tokens). | 
- **source_wallet_id** | **String**| The source wallet ID. | 
- **destination_addresses** | **String**| A list of destination wallet addresses, separated by comma. | 
-
-### Return type
-
-[**[CheckLoopTransfers200ResponseInner]**](CheckLoopTransfers200ResponseInner.md)
-
-### Authorization
-
-[CoboAuth](../README.md#CoboAuth)
-
-### HTTP request headers
-
-- **Content-Type**: Not defined
-- **Accept**: application/json
-
-
 ## createAddress
 
 > [AddressInfo] createAddress(wallet_id, opts)
@@ -1106,7 +1051,7 @@ Name | Type | Description  | Notes
 
 List all wallets
 
-This operation retrieves the information of all wallets under your organization. You can filter the result by wallet type and subtype. For MPC Wallets, you can also filter by project ID and vault ID.  &lt;Note&gt;You must specify either the wallet type or subtype, or both.&lt;/Note&gt; 
+This operation retrieves the information of all wallets under your organization. You can filter the result by wallet type and subtype. For MPC Wallets, you can also filter by project ID and vault ID. 
 
 ### Example
 

package/docs/WalletsExchangeWalletApi.md

@@ -158,7 +158,7 @@ apiInstance.listSupportedAssetsForExchange(exchange_id, opts).then((data) => {
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **exchange_id** | [**ExchangeId**](.md)| The ID of the exchange. Possible values include:   - `binance`: Binance.   - `okx`: OKX.   - `deribit`: Deribit.   - `bybit`: Bybit.   - `gate`: Gate.io   - `bitget'`: Bitget  | 
+ **exchange_id** | [**ExchangeId**](.md)| The ID of the exchange. Possible values include:   - `binance`: Binance.   - `okx`: OKX.   - `deribit`: Deribit.   - `bybit`: Bybit.   - `gate`: Gate.io   - `bitget`: Bitget  | 
  **limit** | **Number**| The maximum number of objects to return. For most operations, the value range is [1, 50]. | [optional] [default to 10]
  **before** | **String**| An object ID that serves as a starting point for retrieving data in reverse chronological order. For example, if you specify `before` as `RqeEoTkgKG5rpzqYzg2Hd3szmPoj2cE7w5jWwShz3C1vyGmk1`, the request will retrieve a list of data objects that end before the object with the object ID `RqeEoTkgKG5rpzqYzg2Hd3szmPoj2cE7w5jWwShz3C1vyGmk1`. You can set this parameter to the value of `pagination.before` in the response of the previous request.  - If you set both `after` and `before`, an error will occur.  - If you leave both `before` and `after` empty, the first page of data is returned.  - If you set `before` to `infinity`, the last page of data is returned.  | [optional] 
  **after** | **String**| An object ID that acts as a starting point for retrieving data in chronological order. For example, if you specify `after` as `RqeEoTkgKG5rpzqYzg2Hd3szmPoj2cE7w5jWwShz3C1vyGSAk`, the request will retrieve a list of data objects that start after the object with the object ID `RqeEoTkgKG5rpzqYzg2Hd3szmPoj2cE7w5jWwShz3C1vyGSAk`. You can set this parameter to the value of `pagination.after` in the response of the previous request.  - If you set both `after` and `before`, an error will occur.  - If you leave both `before` and `after` empty, the first page of data is returned.  | [optional] 
@@ -212,7 +212,7 @@ apiInstance.listSupportedChainsForExchange(exchange_id, asset_id).then((data) =>
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **exchange_id** | [**ExchangeId**](.md)| The ID of the exchange. Possible values include:   - `binance`: Binance.   - `okx`: OKX.   - `deribit`: Deribit.   - `bybit`: Bybit.   - `gate`: Gate.io   - `bitget'`: Bitget  | 
+ **exchange_id** | [**ExchangeId**](.md)| The ID of the exchange. Possible values include:   - `binance`: Binance.   - `okx`: OKX.   - `deribit`: Deribit.   - `bybit`: Bybit.   - `gate`: Gate.io   - `bitget`: Bitget  | 
  **asset_id** | **String**| (This concept applies to Exchange Wallets only) The asset ID. An asset ID is the unique identifier of the asset held within your linked exchange account. You can get the ID of the assets supported by an exchanges by calling [List supported assets](/v2/api-references/wallets--exchange-wallet/list-supported-assets). | 
 
 ### Return type

package/docs/WalletsMPCWalletsApi.md

@@ -83,7 +83,7 @@ Name | Type | Description  | Notes
 
 Create key share holder group
 
-This operation creates a key share holder group for a specified vault. 
+This operation creates a key share holder group for a specified vault. <Note>This operation will not return the `tss_key_share_groups` property until key shares have been created using the [Create TSS request](/v2/api-references/wallets--mpc-wallets/create-tss-request) operation. Creating a wallet with the [Create wallet](/v2/api-references/wallets/create-wallet) operation is only possible after you've completed the previous actions.</Note> 
 
 ### Example
 

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@cobo/cobo-waas2",
-  "version": "1.2.1",
-  "description": "The Cobo Wallet-as-a-Service (WaaS) 2.0 API is the latest version of Cobo’s WaaS API offering. It enables you to access Cobo’s full suite of crypto wallet technologies with powerful and flexible access controls. By encapsulating complex security protocols and streamlining blockchain interactions, this API allows you to concentrate on your core business activities without worrying about the safety of your assets. The WaaS 2.0 API presents the following key features:  - A unified API for Cobo’s [all four wallet types](https://manuals.cobo.com/en/portal/introduction#an-all-in-one-wallet-platform) - Support for 80+ chains and 3000+ tokens - A comprehensive selection of webhook events - Flexible usage models for MPC wallets, including [Organization-Controlled Wallets](https://manuals.cobo.com/en/portal/mpc-wallets/ocw/introduction) and [User-Controlled Wallets](https://manuals.cobo.com/en/portal/mpc-wallets/ucw/introduction) - Programmatic control of smart contract wallets such as Safe{Wallet} with fine-grained access controls - Seamlessly transfer funds across multiple exchanges, including Binance, OKX, Bybit, Deribit, and more  For more information about the WaaS 2.0 API, see [Introduction to WaaS 2.0](https://www.cobo.com/developers/v2/guides/overview/introduction). ",
+  "version": "1.4.0",
+  "description": "The Cobo Wallet-as-a-Service (WaaS) 2.0 API is the latest version of Cobo’s WaaS API offering. It enables you to access Cobo’s full suite of crypto wallet technologies with powerful and flexible access controls. By encapsulating complex security protocols and streamlining blockchain interactions, this API allows you to concentrate on your core business activities without worrying about the safety of your assets. The WaaS 2.0 API presents the following key features:  - A unified API for Cobo’s [all four wallet types](https://manuals.cobo.com/en/portal/introduction#an-all-in-one-wallet-platform) - Support for 80+ chains and 3000+ tokens - A comprehensive selection of webhook events - Flexible usage models for MPC Wallets, including [Organization-Controlled Wallets](https://manuals.cobo.com/en/portal/mpc-wallets/ocw/introduction) and [User-Controlled Wallets](https://manuals.cobo.com/en/portal/mpc-wallets/ucw/introduction) - Programmatic control of smart contract wallets such as Safe{Wallet} with fine-grained access controls - Seamlessly transfer funds across multiple exchanges, including Binance, OKX, Bybit, Deribit, and more  For more information about the WaaS 2.0 API, see [Introduction to WaaS 2.0](https://www.cobo.com/developers/v2/guides/overview/introduction). ",
   "license": "GPL 2.0",
   "main": "dist/index.js",
   "scripts": {