@cobo/cobo-waas2 1.17.0 → 1.18.0

package/docs/ChainsEventData.md

@@ -4,7 +4,7 @@
 
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**data_type** | **String** |  The data type of the event. - `Transaction`: The transaction event data. - `TSSRequest`: The TSS request event data. - `Addresses`: The addresses event data. - `WalletInfo`: The wallet information event data. - `MPCVault`: The MPC vault event data. - `Chains`: The enabled chain event data. - `Tokens`: The enabled token event data. - `TokenListing`: The token listing event data.        - `PaymentOrder`: The payment order event data. - `PaymentRefund`: The payment refund event data. - `PaymentSettlement`: The payment settlement event data. | 
+**data_type** | **String** |  The data type of the event. - `Transaction`: The transaction event data. - `TSSRequest`: The TSS request event data. - `Addresses`: The addresses event data. - `WalletInfo`: The wallet information event data. - `MPCVault`: The MPC vault event data. - `Chains`: The enabled chain event data. - `Tokens`: The enabled token event data. - `TokenListing`: The token listing event data.        - `PaymentOrder`: The payment order event data. - `BalanceUpdateInfo`: The balance update event data. - `PaymentRefund`: The payment refund event data. - `PaymentSettlement`: The payment settlement event data. | 
 **chains** | [**[ChainInfo]**](ChainInfo.md) | The enabled chains. | 
 **wallet_type** | [**WalletType**](WalletType.md) |  | [optional] 
 **wallet_subtypes** | [**[WalletSubtype]**](WalletSubtype.md) |  | [optional] 
@@ -30,6 +30,8 @@ Name | Type | Description | Notes
 
 * `TokenListing` (value: `"TokenListing"`)
 
+* `BalanceUpdateInfo` (value: `"BalanceUpdateInfo"`)
+
 * `PaymentOrder` (value: `"PaymentOrder"`)
 
 * `PaymentRefund` (value: `"PaymentRefund"`)

package/docs/CreateMerchantRequest.md

@@ -6,5 +6,6 @@ Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **name** | **String** | The merchant name. | 
 **wallet_id** | **String** | The ID of the wallet linked to the merchant. | 
+**developer_fee_rate** | **String** | The developer fee rate applied to this merchant. Expressed as a string in decimal format where \"0.1\" represents 10%. This fee is deducted from the payment amount and only applies to top-up transactions. | [optional] 
 
 

package/docs/CreatePaymentOrderRequest.md

@@ -11,6 +11,7 @@ Name | Type | Description | Notes
 **fee_amount** | **String** | The developer fee for the order in fiat currency. It is added to the base amount (`order_amount`) to determine the final charge. For example, if order_amount is \"100.00\" and fee_amount is \"2.00\", the customer will be charged \"102.00\" in total, with \"100.00\" being settled to the merchant and \"2.00\" settled to the developer. Values must be greater than 0 and contain two decimal places. | 
 **merchant_order_code** | **String** | A unique reference code assigned by the merchant to identify this order in their system. | [optional] 
 **psp_order_code** | **String** | A unique reference code assigned by the developer to identify this order in their system. | 
-**expired_in** | **Number** | The pay-in order will expire after approximately a certain number of seconds: - The order status becomes final and cannot be changed - The `received_token_amount` field will no longer be updated - Funds received after expiration will be categorized as late payments and can only be settled from the developer balance. - A late payment will trigger a `transactionLate` webhook event.  | [optional] 
+**expired_in** | **Number** | The number of seconds after which the pay-in order will expire. After expiration: - The order status becomes final and cannot be changed - The `received_token_amount` field will no longer be updated - Funds received after expiration will be categorized as late payments and can only be settled from the developer balance. - A late payment will trigger a `transactionLate` webhook event.  | [optional] 
+**use_dedicated_address** | **Boolean** | Whether to allocate a dedicated address for this order.  - `true`: A dedicated address will be allocated for this order. - `false`: A shared address from the address pool will be used.  | [optional] 
 
 

package/docs/CreateRefundRequest.md

@@ -6,13 +6,13 @@ Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **request_id** | **String** | The request ID that is used to track a refund request. The request ID is provided by you and must be unique. | 
 **merchant_id** | **String** | The merchant ID. | [optional] 
-**payable_amount** | **String** | The amount to refund in cryptocurrency. | 
-**to_address** | **String** | The address where the refunded cryptocurrency will be sent. | 
+**payable_amount** | **String** | The amount to refund in cryptocurrency. The amount must be a positive integer with up to two decimal places. | 
+**to_address** | **String** | The address where the refunded cryptocurrency will be sent. | [optional] 
 **token_id** | **String** | The ID of the cryptocurrency used for refund. Supported values:    - USDC: `ETH_USDC`, `ARBITRUM_USDC`, `SOL_USDC`, `BASE_USDC`, `MATIC_USDC`, `BSC_USDC`   - USDT: `TRON_USDT`, `ETH_USDT`, `ARBITRUM_USDT`, `SOL_USDT`, `BASE_USDT`, `MATIC_USDT`, `BSC_USDT`  | 
 **refund_type** | [**RefundType**](RefundType.md) |  | 
 **order_id** | **String** | The ID of the original pay-in order associated with this refund. Use this to track refunds against specific payments. | [optional] 
-**charge_merchant_fee** | **Boolean** | Indicates whether the merchant should bear the transaction fee for the refund.  If true, the fee will be deducted from merchant's account balance.  | [optional] 
-**merchant_fee_amount** | **String** | The amount of the transaction fee that the merchant will bear for the refund.  This is only applicable if `charge_merchant_fee` is set to true.  | [optional] 
-**merchant_fee_token_id** | **String** | The ID of the cryptocurrency used for the transaction fee.  This is only applicable if `charge_merchant_fee` is set to true.  | [optional] 
+**charge_merchant_fee** | **Boolean** | Whether to charge developer fee to the merchant.     - `true`: The fee amount (specified in `merchant_fee_amount`) will be deducted from the merchant's balance and added to the developer's balance    - `false`: The merchant is not charged any developer fee  When enabled, ensure both `merchant_fee_amount` and `merchant_fee_token_id` are properly specified.  | [optional] 
+**merchant_fee_amount** | **String** | The developer fee amount to charge the merchant, denominated in the cryptocurrency specified by `merchant_fee_token_id`. Required when `charge_merchant_fee` is `true`. Must be:   - A positive integer with up to two decimal places.   - Less than the refund amount  | [optional] 
+**merchant_fee_token_id** | **String** | The ID of the cryptocurrency used for the developer fee. It must be the same as `token_id`. Supported values:   - USDC: `ETH_USDC`, `ARBITRUM_USDC`, `SOL_USDC`, `BASE_USDC`, `MATIC_USDC`, `BSC_USDC`   - USDT: `TRON_USDT`, `ETH_USDT`, `ARBITRUM_USDT`, `SOL_USDT`, `BASE_USDT`, `MATIC_USDT`, `BSC_USDT`  | [optional] 
 
 

package/docs/CreateSettlement.md

@@ -4,14 +4,12 @@
 
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**merchant_id** | **String** | The merchant ID. | [optional] 
-**token_id** | **String** | The ID of the cryptocurrency you want to settle. Supported values:  - USDC: `ETH_USDC`, `ARBITRUM_USDC`, `SOL_USDC`, `BASE_USDC`, `MATIC_USDC`, `BSC_USDC` - USDT: `TRON_USDT`, `ETH_USDT`, `ARBITRUM_USDT`, `SOL_USDT`, `BASE_USDT`, `MATIC_USDT`, `BSC_USDT`  | [optional] 
-**currency** | **String** | The fiat currency for settling the cryptocurrency. Currently, only `USD` is supported. | [optional] [default to 'USD']
-**amount** | **String** | The settlement amount. - If `token_id` is specified, this represents the settlement amount in the specified cryptocurrency. - If `token_id` is not specified, this represents the settlement amount in the specified fiat currency. | [optional] 
-**bank_account_id** | **String** | The ID of the bank account where the settled funds will be deposited. | [optional] 
-**settlement_type** | [**SettlementType**](SettlementType.md) |  | [optional] 
-**crypto_address_id** | **String** | The ID of the pre-approved crypto address used for Crypto settlements.  - This field is only applicable when `payout_channel` is set to `Crypto`. - If `payout_channel` is `OffRamp`, this field will be ignored. - The value must refer to a valid address that has been pre-configured and approved for the given token.  | [optional] 
-**payout_channel** | [**PayoutChannel**](PayoutChannel.md) |  | [optional] 
-**order_ids** | **[String]** | A list of unique order IDs to be included in this settlement.  - This field is only applicable when `settlement_type` is set to `Merchant`. - If provided, the settlement will only apply to the specified orders. - The settlement `amount` must exactly match the total eligible amount from these orders. - This ensures consistency between the declared amount and the actual order-level data being settled.  | [optional] 
+**merchant_id** | **String** | The merchant ID. Specify this field when `settlement_type` is set to `Merchant`. | [optional] 
+**token_id** | **String** | The ID of the cryptocurrency you want to settle. Specify this field when `payout_channel` is set to `Crypto`. Supported values:  - USDC: `ETH_USDC`, `ARBITRUM_USDC`, `SOL_USDC`, `BASE_USDC`, `MATIC_USDC`, `BSC_USDC` - USDT: `TRON_USDT`, `ETH_USDT`, `ARBITRUM_USDT`, `SOL_USDT`, `BASE_USDT`, `MATIC_USDT`, `BSC_USDT`  | [optional] 
+**currency** | **String** | The fiat currency for settling the cryptocurrency. Currently, only `USD` is supported. Specify this field when `payout_channel` is set to `OffRamp`. | [optional] 
+**amount** | **String** | The settlement amount. - If `payout_channel` is set to `Crypto`, this represents the settlement amount in the specified cryptocurrency. - If `payout_channel` is set to `OffRamp`, this represents the settlement amount in the specified fiat currency.  | [optional] 
+**bank_account_id** | **String** | The ID of the bank account where the settled funds will be deposited. This field is only applicable when `payout_channel` is set to `OffRamp`. Call [List all bank accounts](/v2/api-references/payment/list-all-bank-accounts) to retrieve the IDs of registered bank accounts.  | [optional] 
+**crypto_address_id** | **String** | The ID of the crypto address used for crypto withdrawal. Specify this field when `payout_channel` is set to `Crypto`.  Call [List all crypto addresses](/v2/api-references/payments/list-all-crypto-addresses) to retrieve registered crypto addresses.  | [optional] 
+**order_ids** | **[String]** | A list of order IDs to be included in this settlement. If provided, the settlement request will settle the merchant funds received from the specified orders, and the `amount` field will be ignored.   This field is only applicable when `settlement_type` is set to `Merchant`.   | [optional] 
 
 

package/docs/CreateSettlementRequestRequest.md

@@ -5,6 +5,9 @@
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **request_id** | **String** | The request ID that is used to track a settlement request. The request ID is provided by you and must be unique. | 
+**acquiring_type** | [**AcquiringType**](AcquiringType.md) |  | [optional] 
+**payout_channel** | [**PayoutChannel**](PayoutChannel.md) |  | [optional] 
+**settlement_type** | [**SettlementType**](SettlementType.md) |  | [optional] 
 **settlements** | [**[CreateSettlement]**](CreateSettlement.md) |  | 
 
 

package/docs/CryptoAddress.md

@@ -5,10 +5,10 @@
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **token_id** | **String** | The token identifier (e.g., ETH_USDT, TRON_USDT) that this address is associated with. | 
-**address_id** | **String** | Unique identifier for the pre-approved crypto address, used to reference the address securely in requests. This ID is returned by the system and should be used instead of the raw blockchain address in API calls. | 
-**address** | **String** | The actual blockchain address to which funds will be transferred. This is for display purposes only; external clients should always use address_id to refer to the address in secure operations. | 
-**label** | **String** | A human-readable label or alias for the crypto address, set by the merchant or platform operator. This field is optional and intended to help distinguish addresses by usage or purpose (e.g., \"Main Payout Wallet\", \"Cold Wallet\"). | [optional] 
-**created_timestamp** | **Number** | The created time of the crypto address, represented as a UNIX timestamp in seconds. | [optional] 
-**updated_timestamp** | **Number** | The updated time of the crypto address, represented as a UNIX timestamp in seconds. | [optional] 
+**address_id** | **String** | A unique identifier for this crypto address, automatically generated by Cobo. Use this ID (not the raw blockchain address) when submitting a settlement request.  | 
+**address** | **String** | The blockchain address in its native format. This is the actual destination address where funds will be sent. Note: When submitting a settlement request, use the address ID rather than this raw address.  | 
+**label** | **String** | A label to help identify the address's purpose. | [optional] 
+**created_timestamp** | **Number** | The creation time of the crypto address, represented as a UNIX timestamp in seconds. | [optional] 
+**updated_timestamp** | **Number** | The last update time of the crypto address, represented as a UNIX timestamp in seconds. | [optional] 
 
 

package/docs/EstimateContractCallFeeParams.md

@@ -6,7 +6,7 @@ Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **request_id** | **String** | The request ID that is used to track a transaction request. The request ID is provided by you and must be unique within your organization. It is recommended to use the same request ID as the transaction for which you want to estimate the transaction fee. | [optional] 
 **request_type** | [**EstimateFeeRequestType**](EstimateFeeRequestType.md) |  | 
-**chain_id** | **String** | The chain ID of the chain on which the smart contract is deployed. You can retrieve the IDs of all the chains you can use by calling [List enabled chains](https://www.cobo.com/developers/v2/api-references/wallets/list-enabled-chains). | 
+**chain_id** | **String** | The chain ID of the chain on which the smart contract is issued. You can retrieve the IDs of all the chains you can use by calling [List enabled chains](https://www.cobo.com/developers/v2/api-references/wallets/list-enabled-chains). | 
 **source** | [**ContractCallSource**](ContractCallSource.md) |  | 
 **destination** | [**ContractCallDestination**](ContractCallDestination.md) |  | 
 **fee_type** | [**FeeType**](FeeType.md) |  | [optional] 

package/docs/EstimateFeeParams.md

@@ -11,6 +11,6 @@ Name | Type | Description | Notes
 **destination** | [**ContractCallDestination**](ContractCallDestination.md) |  | 
 **fee_type** | [**FeeType**](FeeType.md) |  | [optional] 
 **replaced_transaction_id** | **String** | The ID of the transaction that this transaction replaced. | [optional] 
-**chain_id** | **String** | The chain ID of the chain on which the smart contract is deployed. You can retrieve the IDs of all the chains you can use by calling [List enabled chains](https://www.cobo.com/developers/v2/api-references/wallets/list-enabled-chains). | 
+**chain_id** | **String** | The chain ID of the chain on which the smart contract is issued. You can retrieve the IDs of all the chains you can use by calling [List enabled chains](https://www.cobo.com/developers/v2/api-references/wallets/list-enabled-chains). | 
 
 

package/docs/EstimatedFILFee.md

@@ -0,0 +1,13 @@
+# CoboWaas2.EstimatedFILFee
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**fee_type** | [**FeeType**](FeeType.md) |  | 
+**token_id** | **String** | The token ID of the transaction fee. | 
+**slow** | [**EstimatedFILFeeSlow**](EstimatedFILFeeSlow.md) |  | [optional] 
+**recommended** | [**EstimatedFILFeeSlow**](EstimatedFILFeeSlow.md) |  | 
+**fast** | [**EstimatedFILFeeSlow**](EstimatedFILFeeSlow.md) |  | [optional] 
+
+

package/docs/EstimatedFILFeeSlow.md

@@ -0,0 +1,12 @@
+# CoboWaas2.EstimatedFILFeeSlow
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**gas_premium** | **String** | An optional additional fee that users can include to prioritize their transactions over others. It acts like a tip to incentivize miners to select and include your transaction over transactions with only the base fee. | 
+**gas_fee_cap** | **String** | The gas_fee_cap is a user-defined limit on how much they are willing to pay per unit of gas. | 
+**gas_limit** | **String** | This defines the maximum amount of computational effort that a transaction is allowed to consume. It's a way to cap the resources that a transaction can use, ensuring it doesn't consume excessive network resources. | 
+**gas_base** | **String** | This is the minimum fee required to include a transaction in a block. It is determined by the network's congestion level, which adjusts to maintain a target block utilization rate. The base fee is burned, reducing the total supply of Filecoin over time. | 
+
+

package/docs/EstimatedFee.md

@@ -8,8 +8,8 @@ Name | Type | Description | Notes
 **token_id** | **String** | The token ID of the transaction fee. | 
 **is_loop** | **Boolean** | Whether the transaction was executed as a [Cobo Loop](https://manuals.cobo.com/en/portal/custodial-wallets/cobo-loop) transfer. - `true`: The transaction was executed as a Cobo Loop transfer. - `false`: The transaction was not executed as a Cobo Loop transfer.  | [optional] 
 **fee_amount** | **String** | The transaction fee that you need to pay for the transaction. | 
-**slow** | [**EstimatedUtxoFeeSlow**](EstimatedUtxoFeeSlow.md) |  | [optional] 
-**recommended** | [**EstimatedUtxoFeeSlow**](EstimatedUtxoFeeSlow.md) |  | 
-**fast** | [**EstimatedUtxoFeeSlow**](EstimatedUtxoFeeSlow.md) |  | [optional] 
+**slow** | [**EstimatedFILFeeSlow**](EstimatedFILFeeSlow.md) |  | [optional] 
+**recommended** | [**EstimatedFILFeeSlow**](EstimatedFILFeeSlow.md) |  | 
+**fast** | [**EstimatedFILFeeSlow**](EstimatedFILFeeSlow.md) |  | [optional] 
 
 

package/docs/EstimatedSOLFee.md

@@ -0,0 +1,13 @@
+# CoboWaas2.EstimatedSOLFee
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**fee_type** | [**FeeType**](FeeType.md) |  | 
+**token_id** | **String** | The token ID of the transaction fee. | 
+**slow** | [**EstimatedSOLFeeSlow**](EstimatedSOLFeeSlow.md) |  | [optional] 
+**recommended** | [**EstimatedSOLFeeSlow**](EstimatedSOLFeeSlow.md) |  | 
+**fast** | [**EstimatedSOLFeeSlow**](EstimatedSOLFeeSlow.md) |  | [optional] 
+
+

package/docs/EstimatedSOLFeeSlow.md

@@ -0,0 +1,12 @@
+# CoboWaas2.EstimatedSOLFeeSlow
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**compute_unit_price** | **String** | The cost per compute unit. Transactions consume computational resources measured in compute units, and this price helps determine the cost of executing transactions, especially complex ones involving smart contracts. | 
+**compute_unit_limit** | **String** | The maximum number of compute units allowed for a transaction. This limits the resources any single transaction can consume, preventing excessive resource usage that could impact network performance negatively. | 
+**base_fee** | **String** | The fundamental fee required for each transaction. It is charged to prevent spam transactions and network congestion, ensuring that only meaningful transactions consume network resources. | 
+**rent_amount** | **String** | The fee charged as rent for maintaining the state of accounts on the blockchain. This rent ensures accounts are stored on-chain over the long term and that there's sufficient balance to sustain the account state. | [optional] 
+
+

package/docs/ExchangePermissionToken201Response.md

@@ -4,9 +4,9 @@
 
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**access_token** | **String** | The new Permission Access Token. | [optional] 
-**token_type** | **String** | The type of the tokens, which is Bearer. | [optional] 
-**expires_in** | **Number** | The time in seconds in which the new Permission Access Token expires. | [optional] 
-**refresh_token** | **String** | The Refresh Token, used to obtain another Org Access Token when the new Permission Access Token expires. The expiration time for Refresh Tokens is currently set to 7 days and is subject to change. | [optional] 
+**access_token** | **String** | The Access Token. | [optional] 
+**token_type** | **String** | The token type. This is always `Bearer`. | [optional] 
+**expires_in** | **Number** | The time in seconds until the Access Token expires. This is always `3600`, indicating the token expires 1 hour after issuance. | [optional] 
+**refresh_token** | **String** | The Refresh Token. Use it to obtain a new Access Token when the current one expires. The Refresh Token is valid for 7 days. | [optional] 
 
 

package/docs/ExchangePermissionTokenRequest.md

@@ -4,6 +4,6 @@
 
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**permission_type** | **String** | The OAuth permission type. Set the value as `payment_orders_payin`. | 
+**permission_type** | **String** | Set the value to `payment_orders_payin`. | 
 
 

package/docs/FILBase.md

@@ -0,0 +1,9 @@
+# CoboWaas2.FILBase
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**gas_base** | **String** | This is the minimum fee required to include a transaction in a block. It is determined by the network's congestion level, which adjusts to maintain a target block utilization rate. The base fee is burned, reducing the total supply of Filecoin over time. | [optional] 
+
+

package/docs/FILPrice.md

@@ -0,0 +1,11 @@
+# CoboWaas2.FILPrice
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**gas_premium** | **String** | An optional additional fee that users can include to prioritize their transactions over others. It acts like a tip to incentivize miners to select and include your transaction over transactions with only the base fee. | [optional] 
+**gas_fee_cap** | **String** | The gas_fee_cap is a user-defined limit on how much they are willing to pay per unit of gas. | [optional] 
+**gas_limit** | **String** | This defines the maximum amount of computational effort that a transaction is allowed to consume. It's a way to cap the resources that a transaction can use, ensuring it doesn't consume excessive network resources. | [optional] 
+
+

package/docs/FeeStationApi.md

@@ -238,7 +238,7 @@ Name | Type | Description  | Notes
  **limit** | **Number**| The maximum number of objects to return. For most operations, the value range is [1, 50]. | [optional] [default to 10]
  **before** | **String**| A cursor indicating the position before the current page. This value is generated by Cobo and returned in the response. If you are paginating forward from the beginning, you do not need to provide it on the first request. When paginating backward (to the previous page), you should pass the before value returned from the last response.  | [optional] 
  **after** | **String**| A cursor indicating the position after the current page. This value is generated by Cobo and returned in the response. You do not need to provide it on the first request. When paginating forward (to the next page), you should pass the after value returned from the last response.  | [optional] 
- **direction** | **String**| The sort direction. Possible values include:   - `ASC`: Sort the results in ascending order.   - `DESC`: Sort the results in descending order.  | [optional] [default to '']
+ **direction** | **String**| The sort direction. Possible values include:   - `ASC`: Sort the results in ascending order.   - `DESC`: Sort the results in descending order.  | [optional] [default to 'ASC']
 
 ### Return type
 

package/docs/FeeType.md

@@ -11,6 +11,10 @@
 
 * `UTXO` (value: `"UTXO"`)
 
+* `SOL` (value: `"SOL"`)
+
+* `FIL` (value: `"FIL"`)
+
 * `unknown_default_open_api` (value: `"unknown_default_open_api"`)
 
 

package/docs/GetExchangeRate200Response.md

@@ -4,7 +4,7 @@
 
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**token_id** | **String** | The token ID, which identifies the cryptocurrency. | 
+**token_id** | **String** | The token ID, which is a unique identifier that specifies both the blockchain network and cryptocurrency token in the format `{CHAIN}_{TOKEN}`. | 
 **currency** | **String** | The fiat currency. | 
 **rate** | **String** | The current exchange rate between the specified currency pair. Expressed as the amount of fiat currency per one unit of cryptocurrency. For example, if the cryptocurrency is USDT and the fiat currency is USD, a rate of \"0.99\" means 1 USDT = 0.99 USD. | 
 

package/docs/GraphQLError.md

@@ -0,0 +1,11 @@
+# CoboWaas2.GraphQLError
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**message** | **String** | The error message. | [optional] 
+**locations** | [**[GraphQLErrorLocationsInner]**](GraphQLErrorLocationsInner.md) | The locations in the query where the error occurred. | [optional] 
+**path** | **[String]** | The path in the response where the error occurred. | [optional] 
+
+

package/docs/GraphQLErrorLocationsInner.md

@@ -0,0 +1,10 @@
+# CoboWaas2.GraphQLErrorLocationsInner
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**line** | **Number** | The line number in the query where the error occurred. | [optional] 
+**column** | **Number** | The column number in the query where the error occurred. | [optional] 
+
+

package/docs/GraphQLRequest.md

@@ -0,0 +1,11 @@
+# CoboWaas2.GraphQLRequest
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**query** | **String** | The GraphQL query or mutation as a string. | 
+**variables** | **{String: Object}** | Variables to use in the GraphQL operation. Can include dynamic values required for the query or mutation. | [optional] 
+**operationName** | **String** | The operation name in case of multiple operations in the same query or mutation. | [optional] 
+
+

package/docs/GraphQLResponse.md

@@ -0,0 +1,10 @@
+# CoboWaas2.GraphQLResponse
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**data** | **{String: Object}** | The response data for the GraphQL operation. | [optional] 
+**errors** | [**[GraphQLError]**](GraphQLError.md) | Any errors that occurred during the GraphQL operation. | [optional] 
+
+

package/docs/ListTopUpPayers200Response.md

@@ -0,0 +1,10 @@
+# CoboWaas2.ListTopUpPayers200Response
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**data** | [**[ListTopUpPayers200ResponseDataInner]**](ListTopUpPayers200ResponseDataInner.md) |  | [optional] 
+**pagination** | [**Pagination**](Pagination.md) |  | [optional] 
+
+

package/docs/ListTopUpPayers200ResponseDataInner.md

@@ -0,0 +1,14 @@
+# CoboWaas2.ListTopUpPayers200ResponseDataInner
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**merchant_id** | **String** | The merchant ID. | 
+**payer_id** | **String** | A unique identifier assigned by Cobo to track and identify individual payers. | 
+**developer_fee_rate** | **String** | The developer fee rate applied to top-up transactions made by this payer. Expressed as a decimal string where \"0.1\" represents 10%. | 
+**created_timestamp** | **Number** | The creation time of the payer, represented as a UNIX timestamp in seconds. | [optional] 
+**updated_timestamp** | **Number** | The last update time of the payer, represented as a UNIX timestamp in seconds. | [optional] 
+**transactions** | [**[PaymentTransaction]**](PaymentTransaction.md) | An array of top-up transactions associated with this payer. | [optional] 
+
+

package/docs/MPCVaultEventData.md

@@ -4,7 +4,7 @@
 
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**data_type** | **String** |  The data type of the event. - `Transaction`: The transaction event data. - `TSSRequest`: The TSS request event data. - `Addresses`: The addresses event data. - `WalletInfo`: The wallet information event data. - `MPCVault`: The MPC vault event data. - `Chains`: The enabled chain event data. - `Tokens`: The enabled token event data. - `TokenListing`: The token listing event data.        - `PaymentOrder`: The payment order event data. - `PaymentRefund`: The payment refund event data. - `PaymentSettlement`: The payment settlement event data. | 
+**data_type** | **String** |  The data type of the event. - `Transaction`: The transaction event data. - `TSSRequest`: The TSS request event data. - `Addresses`: The addresses event data. - `WalletInfo`: The wallet information event data. - `MPCVault`: The MPC vault event data. - `Chains`: The enabled chain event data. - `Tokens`: The enabled token event data. - `TokenListing`: The token listing event data.        - `PaymentOrder`: The payment order event data. - `BalanceUpdateInfo`: The balance update event data. - `PaymentRefund`: The payment refund event data. - `PaymentSettlement`: The payment settlement event data. | 
 **vault_id** | **String** | The vault ID. | [optional] 
 **project_id** | **String** | The project ID. | [optional] 
 **name** | **String** | The vault name. | [optional] 
@@ -33,6 +33,8 @@ Name | Type | Description | Notes
 
 * `TokenListing` (value: `"TokenListing"`)
 
+* `BalanceUpdateInfo` (value: `"BalanceUpdateInfo"`)
+
 * `PaymentOrder` (value: `"PaymentOrder"`)
 
 * `PaymentRefund` (value: `"PaymentRefund"`)

package/docs/Merchant.md

@@ -7,7 +7,8 @@ Name | Type | Description | Notes
 **merchant_id** | **String** | The merchant ID. | 
 **name** | **String** | The merchant name. | 
 **wallet_id** | **String** | The ID of the linked wallet. | 
-**created_timestamp** | **Number** | The created time of the merchant, represented as a UNIX timestamp in seconds. | [optional] 
-**updated_timestamp** | **Number** | The updated time of the merchant, represented as a UNIX timestamp in seconds. | [optional] 
+**developer_fee_rate** | **String** | The developer fee rate applied to this merchant. Expressed as a string in decimal format where \"0.1\" represents 10%. This fee is deducted from the payment amount and only applies to top-up transactions. | [optional] 
+**created_timestamp** | **Number** | The creation time of the merchant, represented as a UNIX timestamp in seconds. | [optional] 
+**updated_timestamp** | **Number** | The last update time of the merchant, represented as a UNIX timestamp in seconds. | [optional] 
 
 

package/docs/OAuthApi.md

@@ -4,9 +4,9 @@ All URIs are relative to *https://api.dev.cobo.com/v2*
 
 Method | HTTP request | Description
 ------------- | ------------- | -------------
-[**exchangePermissionToken**](OAuthApi.md#exchangePermissionToken) | **POST** /oauth/permission_token/exchange | Exchange Permission Access Token by API Key
+[**exchangePermissionToken**](OAuthApi.md#exchangePermissionToken) | **POST** /oauth/permission_token/exchange | Get Access Token
 [**getToken**](OAuthApi.md#getToken) | **GET** /oauth/token | Get Org Access Token
-[**refreshPermissionToken**](OAuthApi.md#refreshPermissionToken) | **POST** /oauth/permission_token/refresh | Refresh Permission Access Token by Permission Refresh Token
+[**refreshPermissionToken**](OAuthApi.md#refreshPermissionToken) | **POST** /oauth/permission_token/refresh | Refresh Access Token
 [**refreshToken**](OAuthApi.md#refreshToken) | **POST** /oauth/token | Refresh Org Access Token
 
 
@@ -15,9 +15,9 @@ Method | HTTP request | Description
 
 > ExchangePermissionToken201Response exchangePermissionToken(ExchangePermissionTokenRequest)
 
-Exchange Permission Access Token by API Key
+Get Access Token
 
-<Note>This operation is only applicable to Cobo Portal Checkout SDK developers. To call this operation, you need to use the Cobo OAuth authentication method that requires an api key.</Note> This operation allows Portal Checkout SDK to obtain a new Permission Access Token with a specified client ID, grant type and a Permission Refresh Token.   For security purposes, Permission Access Tokens expire after a certain period. Once they expire, the app needs to call this operation to get a new Permission Access Token and a new Permission Refresh Token. 
+This operation acquires an Access Token and a Refresh Token for the Checkout SDK.  For security purposes, an Access Token expires after a certain period. Once it expires, you need to call the [Refresh Access Token](/v2/api-references/oauth/refresh-access-token) operation to get a new Access Token and a new Refresh Token. 
 
 ### Example
 
@@ -45,7 +45,7 @@ apiInstance.exchangePermissionToken(ExchangePermissionTokenRequest).then((data)
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **ExchangePermissionTokenRequest** | [**ExchangePermissionTokenRequest**](ExchangePermissionTokenRequest.md)| The request body for exchanging an Permission Access Token. | 
+ **ExchangePermissionTokenRequest** | [**ExchangePermissionTokenRequest**](ExchangePermissionTokenRequest.md)| The request body to acquire an Access Token. | 
 
 ### Return type
 
@@ -119,9 +119,9 @@ Name | Type | Description  | Notes
 
 > ExchangePermissionToken201Response refreshPermissionToken(RefreshPermissionTokenRequest)
 
-Refresh Permission Access Token by Permission Refresh Token
+Refresh Access Token
 
-<Note>This operation is only applicable to Cobo Portal Checkout SDK developers. To call this operation, you need to use the Cobo OAuth authentication method that requires an api key.</Note> This operation allows Portal Checkout SDK to refresh a new Permission Access Token with a specified client ID, grant type and a Permission Refresh Token.   For security purposes, Permission Access Tokens expire after a certain period. Once they expire, the app needs to call this operation to get a new Permission Access Token and a new Permission Refresh Token. 
+This operation refreshes the Access Token and Refresh Token for the Checkout SDK.  For security purposes, an Access Token expires after a certain period. Once it expires, you need to call this operation to get a new Access Token and Refresh Token. 
 
 ### Example
 
@@ -149,7 +149,7 @@ apiInstance.refreshPermissionToken(RefreshPermissionTokenRequest).then((data) =>
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **RefreshPermissionTokenRequest** | [**RefreshPermissionTokenRequest**](RefreshPermissionTokenRequest.md)| The request body for refreshing an Permission Access Token. | 
+ **RefreshPermissionTokenRequest** | [**RefreshPermissionTokenRequest**](RefreshPermissionTokenRequest.md)| The request body to refresh the Access Token and the Refresh Token. | 
 
 ### Return type
 

package/docs/Order.md

@@ -19,8 +19,9 @@ Name | Type | Description | Notes
 **psp_order_code** | **String** | A unique reference code assigned by the developer to identify this order in their system. | 
 **status** | [**OrderStatus**](OrderStatus.md) |  | 
 **received_token_amount** | **String** | The total cryptocurrency amount received for this order. Updates until the expiration time. Precision matches the token standard (e.g., 6 decimals for USDT). | 
-**created_timestamp** | **Number** | The created time of the order, represented as a UNIX timestamp in seconds. | [optional] 
-**updated_timestamp** | **Number** | The updated time of the order, represented as a UNIX timestamp in seconds. | [optional] 
-**transactions** | [**[PaymentTransaction]**](PaymentTransaction.md) | An array of transactions associated with this pay-in order. Each transaction represents a separate blockchain operation related to the settlement process. | [optional] 
+**created_timestamp** | **Number** | The creation time of the order, represented as a UNIX timestamp in seconds. | [optional] 
+**updated_timestamp** | **Number** | The last update time of the order, represented as a UNIX timestamp in seconds. | [optional] 
+**transactions** | [**[PaymentTransaction]**](PaymentTransaction.md) | An array of transactions associated with this pay-in order. Each transaction represents a separate blockchain operation related to the pay-in process. | [optional] 
+**settlement_status** | [**SettleStatus**](SettleStatus.md) |  | [optional] 
 
 

package/docs/OrganizationsApi.md

@@ -0,0 +1,55 @@
+# CoboWaas2.OrganizationsApi
+
+All URIs are relative to *https://api.dev.cobo.com/v2*
+
+Method | HTTP request | Description
+------------- | ------------- | -------------
+[**getOrgInfo**](OrganizationsApi.md#getOrgInfo) | **GET** /organizations/info | Get organization information
+
+
+
+## getOrgInfo
+
+> OrgInfo getOrgInfo()
+
+Get organization information
+
+This operation retrieves the detailed information about the organization associated with the current API key. 
+
+### Example
+
+```javascript
+const CoboWaas2 = require('@cobo/cobo-waas2');
+// Initialize the API client
+const apiClient = CoboWaas2.ApiClient.instance
+// Select the development environment. To use the production environment, replace `Env.DEV` with `Env.PROD`
+apiClient.setEnv(CoboWaas2.Env.DEV);
+// Replace `<YOUR_PRIVATE_KEY>` with your private key
+apiClient.setPrivateKey("<YOUR_PRIVATE_KEY>");
+// Call the API
+const apiInstance = new CoboWaas2.OrganizationsApi();
+apiInstance.getOrgInfo().then((data) => {
+  console.log('API called successfully. Returned data: ' + data);
+}, (error) => {
+  console.error(error);
+});
+
+```
+
+### Parameters
+
+This endpoint does not need any parameter.
+
+### Return type
+
+[**OrgInfo**](OrgInfo.md)
+
+### Authorization
+
+[CoboAuth](../README.md#CoboAuth)
+
+### HTTP request headers
+
+- **Content-Type**: Not defined
+- **Accept**: application/json
+

package/docs/PayerAccount.md

@@ -0,0 +1,14 @@
+# CoboWaas2.PayerAccount
+
+## Properties
+
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**merchant_id** | **String** | The merchant ID. | 
+**payer_id** | **String** | A unique identifier assigned by Cobo to track and identify individual payers. | 
+**developer_fee_rate** | **String** | The developer fee rate applied to the top-up transactions made by the payer. Expressed as a decimal string where \"0.1\" represents 10%. | 
+**created_timestamp** | **Number** | The creation time of the payer, represented as a UNIX timestamp in seconds. | [optional] 
+**updated_timestamp** | **Number** | The last update time of the payer, represented as a UNIX timestamp in seconds. | [optional] 
+**accounts** | [**[Account]**](Account.md) | An array of accounts associated with this payer. | [optional] 
+
+