@cloudtower/parrot 0.6.0 → 0.7.0

package/src/locales/zh-CN/host.json

@@ -0,0 +1,407 @@
+{
+  "access_ip": "接入 IP",
+  "already_copy": "IP 地址已复制",
+  "average_usage_over_last_15_min": "最近 2 小时平均使用率",
+  "current_usage_percent": "当前使用率",
+  "binding": "绑定",
+  "block": "块",
+  "capacity_and_zone": "容量与分区",
+  "cluster": "所属集群",
+  "connected_error": "出错",
+  "compatibility_model": "CPU 兼容性模型",
+  "connected_healthy": "健康",
+  "connected_warning": "不健康",
+  "connecting": "连接中",
+  "session_expired": "连接断开",
+  "initializing": "初始化中",
+  "copy": "复制",
+  "count_cores": "{count} 核",
+  "cpu": "CPU",
+  "cpu_model": "CPU 型号",
+  "cpu_brand": "CPU 型号",
+  "data_ip": "存储 IP",
+  "datacenters": "所属数据中心",
+  "zone": "所属可用域",
+  "edit_host_name": "编辑主机名",
+  "edit_host_scvm_name": "编辑 SCVM 主机名",
+  "edit_ipmi": "编辑 IPMI 信息",
+  "edit_nic_mtu": "编辑网口 MTU",
+  "edit_nic_mtu_warning": "修改 MTU 后，由于网络资源的重新分配，可能导致该网卡断开几秒。",
+  "filter_host": "筛选主机",
+  "hdd_data_capacity": "HDD 总容量",
+  "hdd_disk_count": "HDD 盘数",
+  "host_no_exists": "该主机已经不存在。",
+  "idle_capacity": "空闲容量",
+  "internet_access": "网口",
+  "count_internet_access": "{count} 网口",
+  "invalid_capacity": "失效容量",
+  "ip_address": "IP 地址",
+  "ipmi_ip": "IPMI IP",
+  "main_frequency": "CPU 频率",
+  "management_ip": "管理 IP",
+  "memory": "内存",
+  "migrate_ip": "迁移 IP",
+  "monitor": "监控",
+  "mtu_out_of_range": "MTU 必须在 1500 - 9000 之间",
+  "nic": "网卡",
+  "nic_mtu_confirm": "已确认物理交换机开启了巨帧功能",
+  "nic_mtu_confirm_desc": "当 MTU 不等于 1500 时，需要同时在交换机上开启巨帧功能。否则，会导致网络传输速度降低。",
+  "nics": "网口",
+  "no_nic": "无网卡",
+  "physical_disk": "物理盘",
+  "provisioned_cpu_cores": "已分配 vCPU",
+  "provisioned_memory_bytes": "已分配内存",
+  "sort_by_disk_character": "图示按盘符排序",
+  "sort_by_nic_character": "图示按网卡名排序",
+  "ssd_data_capacity": "SSD 总容量",
+  "ssd_disk_count": "SSD 盘数",
+  "pmem_disk_count": "PMem 交错集数",
+  "pmem_dimm_count": "PMem 数",
+  "pmem_dimm_capacity": "PMem 容量",
+  "storage": "存储",
+  "store_ip": "存储 IP",
+  "total_cache_capacity": "缓存空间",
+  "total_capacity": "总容量",
+  "total_cpu_cores": "CPU 核数",
+  "total_cpu_hz": "CPU 频率",
+  "total_cpu_sockets": "CPU 插槽",
+  "total_data_capacity": "总存储容量",
+  "total_memory_bytes": "总内存",
+  "total_with_num": "共 {num}",
+  "unhealthy": "不健康",
+  "unmounted": "未挂载",
+  "update_host": "更新主机 { host_name }",
+  "mount_disk": "{host_name} 挂载磁盘 {disk_name}",
+  "unmount_disk": "{host_name} 卸载磁盘 {disk_name} ",
+  "used_capacity": "已使用容量",
+  "used_cpu_hz": "已使用 CPU (Hz)",
+  "used_data_space": "已使用存储容量",
+  "used_memory_bytes": "已使用内存",
+  "used": "已使用",
+  "invalid": "失效",
+  "idle": "空闲",
+  "serial": "序列号",
+  "serial2": "序列号：{serial}",
+  "scvm_name": "SCVM 主机名",
+  "can_not_edit_host_name": "无法编辑主机名",
+  "can_not_edit_scvm_name": "无法编辑 SCVM 主机名",
+  "selectd_host_belongs_cluster_not_support_edit_host_name_yet": "选中的主机 {host_name} 所属集群 {cluster_name} 的版本低于 4.0.5，不支持编辑主机名的功能。",
+  "not_support_edit_scvm_name": "选中的主机 {host_name} 所属集群 {cluster_name} 的版本低于 4.0.5，不支持编辑 SCVM 主机名的功能。",
+  "host_name_duplicated": "集群内已存在同名主机。",
+  "scvm_name_duplicated": "集群内已存在同名 SCVM 主机。",
+  "scan_too_long": "扫描可添加的主机花费了较长时间。您也可以<0>跳过此步骤</0>，尝试手动发现主机。",
+  "please_wait": "请稍候...",
+  "discovering": "正在寻找可添加的主机",
+  "not_found": "没有发现可部署的主机。",
+  "not_found_tip": "请尝试<0>重新扫描</0>或<1>手动添加</1>",
+  "has_discovered": "已发现 {count} 台可添加的主机。请选择需要添加的主机。",
+  "no_discovered": "尚未发现可添加的主机。请手动发现主机。",
+  "cancel_discover": "取消手动发现",
+  "select_host_tip": "没找到想添加的主机？",
+  "manual_discover": "手动发现",
+  "discover_host": "发现主机",
+  "select_host": "选择主机",
+  "set_host_config": "配置主机",
+  "deploy_host": "执行部署",
+  "license_checking_title": "正在检查软件许可",
+  "add_host_title": "添加主机",
+  "adding_host_title": "正在添加主机...",
+  "cannot_add_host_title": "无法添加主机",
+  "system_not_match": "主机系统与当前集群不兼容，无法加入集群。",
+  "rdma_not_match": "该主机不包含支持 RDMA 的网口，无法加入集群。",
+  "all_flash_not_match": "该主机为全 SSD 配置，当前集群软件许可不支持全闪存功能。",
+  "size_not_match": "该主机容量超过集群许可允许的单节点最大容量。",
+  "cpu_vendor_not_match": "该主机的 CPU 供应商与集群不一致，无法加入集群。",
+  "discovered_hosts_title": "已发现的主机",
+  "count": "台",
+  "input_error": "请填写合法的 IPv4、IPv6 或 MAC 地址。",
+  "empty_input_error": "请填写主机地址。",
+  "input_placeholder": "IPv4, IPv6 地址或 MAC 地址",
+  "manual_desc": "通过主机的 IP 地址或 MAC 地址，手动发现需要部署的主机。",
+  "host_address": "主机地址",
+  "rescan": "重新扫描",
+  "selected_hosts": "已选中 {count} 台",
+  "success_msg": "{ inputs } 对应的主机已被成功发现并选中。",
+  "please_select": "请选择至少一台主机",
+  "set_host_config_desc": "配置选中的 {count} 台主机",
+  "management_port": "管理网口",
+  "storage_port": "存储网口",
+  "vmware_access_port": "VMware 接入网口",
+  "vmware_access_ip": "VMware 接入 IP",
+  "access_port": "接入网口",
+  "labels": "标签",
+  "go_to_host_detail": "跳转到该主机详情",
+  "power_name": "电源名称",
+  "click_host_or_power_for_more_info": "点击主机或电源查看更多信息",
+  "disk_layout_not_provided": "当前机型未提供物理盘布局",
+  "disk_layout_not_provided_physical_slot": "暂不支持从当前型号的存储控制器获取物理盘槽位信息",
+  "slot_number": "槽位号",
+  "slot_number2": "槽位号：{slot_number}",
+  "goto_disk_detail": "查看该物理盘详情",
+  "slot_empty": "未插盘",
+  "click_disk_for_more_info": "点击物理盘查看更多信息",
+  "forward_view": "正视图",
+  "backward_view": "后视图",
+  "power": "电源",
+  "unexpand_brick_info": "收起机箱信息",
+  "expand_brick_info": "展开机箱信息",
+  "server_serial": "服务器型号",
+  "memory_capacity": "内存容量",
+  "host_info": "主机信息",
+  "tower_and_cluster_full_desc": "当前 CloudTower 已管理 {totalCount} 台主机，该集群已包含 {clusterCount} 台主机。已分别达到 CloudTower 软件和集群软件许可允许的最大主机数。",
+  "tower_and_cluster_full_light_desc": "请更新 CloudTower 和集群软件许可后，再尝试添加主机。",
+  "tower_full_desc": "当前 CloudTower 已管理 {count} 台主机，已达到 CloudTower 软件许可允许的最大主机数。",
+  "tower_full_light_desc": " 请更新 CloudTower 软件许可后，再尝试添加主机。",
+  "cluster_full_desc": " 当前集群包含 {count} 台主机，已达到集群软件许可允许的最大主机数。",
+  "cluster_full_light_desc": "请更新集群软件许可后，再尝试添加主机。",
+  "cannot_add_zero_hosts": "请选择至少一台主机。",
+  "add_too_many_hosts_to_tower": "当前 CloudTower 许可允许的主机上限数为 {totalCount} 台，不足以添加 {count} 台新主机。",
+  "add_too_many_hosts_to_cluster": "当前集群许可允许的主机上限数为 {clusterCount} 台，不足以添加 {count} 台新主机。",
+  "add_too_many_hosts_to_everoute": "当前 Everoute 许可的空闲授权数为 {licenseCount} 个，不足以添加选中的主机（需要 {count} 个）。",
+  "no_host_management_ports": "请填写管理网口。",
+  "no_host_management_ip": "请填写管理 IP。",
+  "ip_address_not_in_management_network": "不属于管理网络网段。",
+  "do_not_know_management_network": "集群管理网络网段未知，无法校验。",
+  "no_host_storage_ports": "请填写存储网口。",
+  "no_host_storage_ip": "请填写存储 IP。",
+  "ip_address_not_in_storage_network": "不属于存储网络网段。",
+  "do_not_know_storage_network": "集群存储网络网段未知，无法校验。",
+  "no_host_access_ports": "请填写接入网口。",
+  "no_host_access_ip": "请填写接入 IP。",
+  "no_host_migration_ip": "请填写迁移 IP。",
+  "ip_address_not_in_access_network": "不属于接入网络网段。",
+  "do_not_know_access_network": "集群接入网络网段未知，无法校验。",
+  "no_esxi_ip": "请填写 ESXi IP。",
+  "no_esxi_username": "请填写 ESXi 用户名。",
+  "no_esxi_password": "请填写 ESXi 密码。",
+  "no_ipmi_ip": "请填写 IPMI IP。",
+  "no_ipmi_username": "请填写 IPMI 用户名。",
+  "no_ipmi_password": "请填写 IPMI 密码。",
+  "invalid_ip_address": "IP 地址格式不合法。",
+  "ip_address_conflict_within_cluster": "与集群已有 IP 地址冲突",
+  "ip_address_conflict_within_form": "与待添加主机的其他 IP 地址冲突",
+  "no_disk_function": "未指定用途",
+  "has_disks_without_function": "主机存在未选择用途的物理盘。",
+  "meta_disks_not_enough": "主机应至少包含 2 个含元数据分区的物理盘。",
+  "data_disks_not_enough": "主机应至少包含 1 个数据盘。",
+  "host_has_been_discovered": "该主机已被发现。",
+  "host_has_been_deployed": "该主机已经被部署。",
+  "host_cannot_be_discovered": "未发现可添加主机。",
+  "disk_function_tooltip1": "为不含元数据分区的物理盘选择用途。选择高速物理盘作为缓存盘，大容量相对低速的物理盘作为数据盘。",
+  "disk_function_tooltip2": "根据物理盘是否包含元数据分区，其用途已经确定。",
+  "disk_function_tooltip3": "为每块物理盘手动选择用途。选择高速物理盘作为缓存盘，大容量相对低速的物理盘作为数据盘。确保至少两块缓存盘包含元数据分区。",
+  "disk_function_tooltip4": "为每块物理盘手动选择用途。确保至少两块数据盘包含元数据分区。",
+  "disk_function_tooltip5": "对于元数据分区已启用 RAID1 的主机，为不含元数据分区的物理盘选择用途。选择高速物理盘作为缓存盘，大容量相对低速的物理盘作为数据盘。对于元数据分区不启用 RAID1 的主机，为每块物理盘手动选择用途。确保至少两块缓存盘包含元数据分区。",
+  "disk_function_tooltip6": "对于元数据分区已启用 RAID1 的主机，根据物理盘是否包含元数据分区，其用途已经确定。对于元数据分区不启用 RAID1 的主机，为每块物理盘手动选择用途。确保至少两块缓存盘包含元数据分区。",
+  "deploy_in_progress": "正在按照配置将主机添加到集群…",
+  "deploy_completed": "部署完成",
+  "deploy_fail_alert": "{count} 台主机部署失败。请清理失败主机的配置信息，并尝试重新部署。",
+  "deploy_success_alert": "已成功添加 {count} 台新主机。请在”机架配置“页面为新加主机设置所属机箱和机架。",
+  "deploy_success_with_vhost_alert": "已成功添加 {count} 台新主机。请重启主机，以保证 Boost 模式生效。请在”机架配置“页面为新加主机设置所属机箱和机架。",
+  "empty_as_not_set": "留空则不设置",
+  "host_log_title": "主机 {name} 的部署日志",
+  "check_log": "查看日志",
+  "select_nic": "选择网口",
+  "cluster_disconnect_no_data": "所属集群连接异常，无法获取数据",
+  "cluster_cannot_support_pmem": "当前集群不支持 PMem 模式。",
+  "host_dose_not_support_pmem": "该主机不包含 PMem，无法加入该集群。",
+  "pmem_version_inconsistent": "主机内的 PMem 的固件版本不一致。",
+  "pmem_not_healthy": "包含不健康的 PMem。",
+  "pmem_has_wrong_region": "包含模式为非交错的 Region。",
+  "pmem_region_is_not_one": "交错集数量不为 1。",
+  "pmem_not_in_numa_node": "包含不位于 NUMA Node0 的 PMem。",
+  "pmem_not_in_region": "存在未加入交错集的 PMem。",
+  "lack_of_rdma_iface": "主机上不包含支持 RDMA 的网口。",
+  "do_not_match_pmem_cluster_requirements": "该主机不满足 PMem 模式部署要求：{ reasons }",
+  "host_name_empty_validation": "请填写主机名。",
+  "host_name_length_validation": "主机名支持的字符长度范围为 2~64。",
+  "host_name_content_validation": "仅支持大小写英文字母、数字和连字符 (-)。",
+  "host_name_beginning_validation": "主机名开头不允许是连字符 (-) 或数字 。",
+  "view_all": "查看所有",
+  "unit_rpm": "单位：RPM",
+  "cluster__architecture": "CPU 架构",
+  "cpu_arch": "CPU 架构",
+  "select_all": "全部选择",
+  "cancel_selected_items": "取消选择",
+  "not_in_same_physical_nic": "不属于同一个物理网卡",
+  "host_zone_validation": "主机 {name} 的可用域不能为空。",
+  "host_zone_placeholder": "选择主机所属可用域",
+  "topo_invalid_desc": "当前集群为双活集群，请确保为集群内优先和次级可用域的主机配置机架，再尝试添加主机。",
+  "topo_invalid_light_desc": "请访问集群的“机架配置”页面，并将集群内所有主机加入机架。",
+  "logical_cpu": "逻辑 CPU",
+  "total_cpu": "共 {num} CPU",
+  "reserved": "预留",
+  "exclusive": "已独占",
+  "canBeExclusive": "可独占",
+  "host_reserved_cpu_tip": "预留给系统服务和虚拟机共享的 CPU",
+  "allocable_cpu_cores_for_vm_exclusive": "可独占 CPU",
+  "provisioned_cpu_cores_for_vm_exclusive": "已独占 CPU",
+  "enter_maintenance_mode": "进入维护模式",
+  "enter_maintenance_mode_pre_check_host": "正在检查主机 <1>{name}</1> 是否可进入维护模式......",
+  "enter_maintenance_mode_pre_check_scvm": "正在检查 SCVM <1>{name}</1> 是否可进入维护模式......",
+
+  "error_enter_maintenance_mode_pre_check_host": "无法将主机 <1>{name}</1> 置于维护模式。请解决如下问题后，重新尝试进入维护模式。",
+  "error_enter_maintenance_mode_pre_check_scvm": "无法将 SCVM <1>{name}</1> 置于维护模式。请解决如下问题后，重新尝试进入维护模式。",
+
+  "success_enter_maintenance_mode_pre_check": "主机 <1>{name}</1> 可以进入维护模式。确认将该主机上虚拟机迁出，并使主机进入维护模式？",
+  "notice_enter_maintenance_mode_pre_check1": "主机 <1>{name}</1> 可以进入维护模式，但请注意以下问题。确认将该主机上虚拟机迁出，并使主机进入维护模式？",
+  "notice_enter_maintenance_mode_pre_check2": "主机 <1>{name}</1> 可以进入维护模式，但请注意以下问题。确认将该主机上虚拟机迁出或关机，并使主机进入维护模式？",
+  "vmware_success_enter_maintenance_mode_pre_check": "{clusterTypeName} <1>{name}</1> 可以进入维护模式。确认使该主机进入维护模式？",
+  "vmware_notice_enter_maintenance_mode_pre_check": "{clusterTypeName} <1>{name}</1> 可以进入维护模式，但请注意以下问题。确认使该主机进入维护模式？",
+  "check_host_exists_maintenance_mode_host": "集群中是否存在主机处于“维护模式”或“进入维护模式中”状态",
+  "check_host_exists_maintenance_mode_scvm": "集群中是否存在 SCVM 处于“维护模式”或“进入维护模式中”状态",
+  "check_storage_need_recover": "集群数据恢复情况",
+  "check_cluster_capacity": "集群空闲存储空间",
+  "check_cluster_quorum_services": "服务运行状态",
+  "check_exists_one_replica_pextent": "当前主机中是否存在 1 副本数据块",
+  "vmware_check_exists_one_replica_pextent": "当前主机中是否存在 1 副本数据块",
+  "check_target_host_storage_network": "当前主机的存储网络连接状态",
+  "check_exists_suspend_or_unknown_vms": "当前主机上是否存在暂停或未知状态的虚拟机",
+  "check_ha_enabled_vms_can_offline_migrate": "当前主机上开启了 HA 的虚拟机是否可全部迁出",
+  "check_vms_can_live_migrate": "当前主机上运行中的虚拟机是否可全部迁出",
+  "error_check_host_exists_maintenance_mode": "集群中存在主机处于“维护模式”状态",
+  "error_check_storage_need_recover": "集群存在数据恢复",
+  "error_check_cluster_capacity": "集群中其他主机的空闲存储空间不足以恢复当前主机的所有数据",
+  "error_check_cluster_quorum_services": "服务运行状态不满足条件",
+  "error_check_exists_one_replica_pextent": "当前主机中存在 1 副本数据块",
+  "vmware_error_check_exists_one_replica_pextent": "当前主机中存在 1 副本数据块",
+  "error_check_target_host_storage_network": "当前主机的存储网络连接状态异常",
+  "error_check_exists_suspend_or_unknown_vms": "当前主机上存在暂停或未知状态的虚拟机",
+  "error_check_ha_enabled_vms_can_offline_migrate": "当前主机上存在开启了 HA 的虚拟机无法迁出",
+  "error_check_vms_can_live_migrate": "当前主机上的系统虚拟机处于运行中且无法迁出",
+  "success_check_host_exists_maintenance_mode": "集群中没有主机处于维护模式",
+  "success_check_storage_need_recover": "集群无数据恢复",
+  "success_check_cluster_capacity": "集群中其他主机的空闲存储空间充足",
+  "success_check_cluster_quorum_services": "服务运行状态正常",
+  "success_check_exists_one_replica_pextent": "当前主机中不存在 1 副本数据块",
+  "vmware_success_check_exists_one_replica_pextent": "当前主机中不存在 1 副本数据块",
+  "success_check_target_host_storage_network": "当前主机的存储网络连接状态正常",
+  "success_check_exists_suspend_or_unknown_vms": "当前主机上不存在暂停或未知状态的虚拟机",
+  "success_check_ha_enabled_vms_can_offline_migrate": "当前主机上开启了 HA 的虚拟机可全部迁出（或不存在开启 HA 的虚拟机）",
+  "success_check_vms_can_live_migrate": "当前主机上运行中的虚拟机可全部迁出（或不存在运行中的虚拟机）",
+  "warning_check_vms_can_live_migrate": "需将无法迁出的虚拟机关机，以使主机进入维护模式。",
+  "warning_check_vms_can_live_migrate2": "主机进入维护模式的过程中，会将如下无法迁出的虚拟机关机。",
+  "entering_maintenance_mode": "正在进入维护模式...",
+  "in_maintenance_mode": "已处于维护模式",
+  "in_maintenance_mode_for_time": "已处于维护模式 {time}。",
+  "host_health": "主机状态健康。",
+  "host_initializing": "主机初始化中...",
+  "host_error": "主机状态出错。",
+  "host_session_expired": "主机连接断开。",
+  "in_use": "使用中",
+  "maintenance_mode": "维护模式",
+  "healthy_in_use": "健康使用中",
+  "in_maintenance": "维护中",
+  "count_in_use": "{count} 个使用中",
+  "count_in_maintenance": "{count} 个维护中",
+  "connected_healthy_count": "健康",
+  "connected_error_count": "出错",
+  "session_expired_count": "连接断开",
+  "initializing_count": "初始化",
+  "count_connected_error": "出错 {count}",
+  "count_session_expired": "连接断开 {count}",
+  "count_initializing": "初始化 {count}",
+  "maintenance_mode_entering": "进入维护模式中",
+  "reserved_cpu_cores_for_system_service": "系统预留 CPU",
+  "vcpu_count_of_all_vms_nonexclusive": "虚拟机 vCPU 总分配",
+  "cpu_over_allocation_ratio_for_all_vms": "虚拟机 vCPU 总分配比",
+  "vcpu_count_of_active_vms_nonexclusive": "虚拟机 vCPU 活跃分配",
+  "cpu_over_allocation_ratio_for_active_vms": "虚拟机 vCPU 活跃分配比",
+  "reserved_cpu_cores_for_vm_shared": "为虚拟机共享保留的 CPU 内核数",
+  "available_cpus_count_for_vms": "虚拟机可用的 CPU 数",
+  "error_check_host_exists_maintenance_mode_info1": "主机 {host_name} 正在进入维护模式，需在其维护任务完成、并退出维护模式后，再尝试将当前主机置于维护模式。",
+  "error_check_host_exists_maintenance_mode_info2": "主机 {host_name} 处于存储维护模式状态，需在其维护任务完成、并退出维护模式后，再尝试将当前主机置于维护模式。",
+  "error_check_host_exists_maintenance_mode_info3": "{clusterTypeName} {host_name} 处于维护模式状态，需在其维护任务完成、并退出维护模式后，再尝试将当前主机置于维护模式。",
+  "error_check_storage_need_recover_info": "请等待数据恢复完成后，再尝试进入维护模式。",
+  "error_check_cluster_quorum_services_info1": "除当前节点外，集群 zookeeper 服务存在异常。",
+  "error_check_cluster_quorum_services_info2": "除当前节点外，集群 mongodb 服务存在异常。",
+  "error_check_cluster_quorum_services_info3": "集群的其他节点中，不存在 meta 服务运行正常的节点。",
+  "error_check_cluster_quorum_services_info4": "当前节点的 job-center-worker 服务运行状态异常",
+  "error_check_cluster_quorum_services_info5": "当前节点的 libvirt 服务运行状态异常",
+  "enter_maintenance_mode_alert_info1": "1. 进入维护模式的过程中，此主机将不可作为虚拟机调度的对象，直至退出维护模式。",
+  "enter_maintenance_mode_alert_info2": "2. 开始进入维护模式后，如集群发生数据恢复，将等待数据恢复完成后继续进入维护模式。",
+  "enter_maintenance_mode_alert_info3": "3. 处于维护模式 12 小时后，开始对主机上的冷数据进行恢复。",
+  "vmware_enter_maintenance_mode_alert_info1": "1. 请将 SMTX OS 置于维护模式后，再将 SCVM 关机、并使该 ESXi 主机进入 vSphere 维护模式。",
+  "cannot_enter_maintenance_mode": "无法进入维护模式",
+  "confirm_check_vms_can_live_migrate": "将无法迁出的 {count} 个虚拟机关机",
+  "warning_check_vms_can_live_migrate_info": "由于集群中的计算资源不充足、或虚拟机挂载了直通设备、或迁移后无法满足放置组策略中规定为“必须”的放置规则，以下运行中的虚拟机无法迁出：",
+  "enter_maintenance_mode_pre_check_error_host": "将主机 {name} 置于维护模式失败。请解决如下问题后，重新尝试进入维护模式。",
+  "enter_maintenance_mode_pre_check_error_scvm": "将 SCVM {name} 置于维护模式失败。请解决如下问题后，重新尝试进入维护模式。",
+
+  "check_host_state_and_exist": "检查服务运行状态并退出",
+  "exit_maintenance_mode": "退出维护模式",
+  "cannot_exit_maintenance_mode": "无法退出维护模式",
+  "exit_maintenance_mode_pre_check_host": "正在检查主机 <1>{name}</1> 是否可退出维护模式......",
+  "exit_maintenance_mode_pre_check_scvm": "正在检查 SCVM <1>{name}</1> 是否可退出维护模式......",
+
+  "error_exit_maintenance_mode_pre_check_host": "无法将主机 <1>{name}</1> 退出维护模式。请解决如下问题后，再尝试退出维护模式。",
+  "error_exit_maintenance_mode_pre_check_scvm": "无法将 SCVM <1>{name}</1> 退出维护模式。请解决如下问题后，再尝试退出维护模式。",
+
+  "exit_maintenance_mode_pre_check_error_host": "将主机 <1>{name}</1> 退出维护模式失败。请解决如下问题后，重新尝试退出维护模式。",
+  "exit_maintenance_mode_pre_check_error_scvm": "将 SCVM <1>{name}</1> 退出维护模式失败。请解决如下问题后，重新尝试退出维护模式。",
+
+  "success_exit_maintenance_mode_pre_check": "{clusterTypeName} <0>{name}</0> 的<1>关键服务</1>已<2>正常运行</2>，确认退出维护模式？",
+  "check_storage_network_item": "当前主机的存储网络连接状态",
+  "check_services_item": "当前主机的服务运行状态",
+  "check_storage_network_item_error": "当前主机的存储网络连接异常",
+  "check_services_item_error": "当前主机的以下服务运行状态异常",
+  "check_storage_network_item_success": "当前主机的存储网络连接正常",
+  "check_services_item_success": "当前主机的服务运行状态正常",
+  "start_auto_shutdown_vm": "同时将自动关机的虚拟机开机",
+  "start_auto_shutdown_vm_desc": "将进入维护模式过程中自动关机的虚拟机开机。仅支持对关机的虚拟机操作。",
+  "can_start_vm_count": "{count} 个虚拟机可开机",
+  "cannot_start_vm_count": "{count} 个虚拟机无法开机",
+  "move_back_hot_migration_vm": "同时迁回已热迁移的虚拟机",
+  "move_back_hot_migration_vm_desc": "将进入维护模式过程中自动热迁移的虚拟机迁回该主机。仅支持对运行中的虚拟机操作。",
+  "can_move_back_vm_count": "{count} 个虚拟机可迁回",
+  "cannot_move_back_vm_count": "{count} 个虚拟机无法迁回",
+  "move_back_cold_migration_vm": "同时迁回已冷迁移的虚拟机",
+  "move_back_cold_migration_vm_desc": "将进入维护模式过程中自动冷迁移的虚拟机迁回该主机。仅支持对关机的虚拟机操作。",
+  "no_auto_shutdown_vm": "无自动关机的虚拟机",
+  "all_vms_cannot_start": "所有自动关机的虚拟机（{count} 个）均无法开机",
+  "no_auto_hot_migration_vm": "无自动热迁移的虚拟机",
+  "all_hot_vms_cannot_move_back": "所有自动热迁移的虚拟机（{count} 个）均无法迁回",
+  "no_auto_cold_migration_vm": "无自动冷迁移的虚拟机",
+  "all_cold_vms_cannot_move_back": "所有自动冷迁移的虚拟机（{count} 个）均无法迁回",
+  "inoperable_vm_reason": "{vm_name}：{reason}",
+  "vm_has_been_deleted": "已删除虚拟机。",
+  "vm_status_changed_hot_migration": "当前状态不是“运行中”或所属主机变更。",
+  "vm_status_changed": "当前状态不是“关机”或所属主机变更。",
+  "vm_has_host_devices": "带有直通设备。",
+  "vm_in_recycle_bin": "已将虚拟机移至回收站",
+  "vm_usage_error_info": "{vm_usage}：{vms}。",
+  "esxi_host_cpu": "ESXi 主机 CPU",
+  "scvm_host_cpu": "SCVM 主机 CPU",
+  "esxi_host_memory": "ESXi 主机内存",
+  "scvm_host_memory": "SCVM 主机内存",
+  "cpu_usage": "CPU 使用率",
+  "memory_usage": "内存使用率",
+  "data_space_usage": "存储使用率",
+  "exist_host_in_maintenance_mode": "当前集群存在主机 {name} 处于维护模式。",
+  "exist_host_entering_maintenance_mode": "当前集群存在主机 {name} 正在进入维护模式。",
+  "exist_host_in_maintenance_mode_desc": "请将主机退出维护模式后，再尝试添加主机。",
+  "add_host_vdses_desc": "请为以下虚拟分布式交换机至少关联一个连接正常的物理网口。",
+  "add_host_vdses_light_desc": "关联同一虚拟分布式交换机的网口需互相物理连通。每个网口仅可被分配给一个虚拟分布式交换机。",
+  "add_host_vds_desc1": "已关联{vlans}网络。",
+  "add_host_vds_desc2": "需选择速率在 10GbE 以上的网口。",
+  "add_host_vds_desc3": "选择速率在 10GbE 以上、且属于同一物理网卡的 RDMA 网口。",
+  "mgt_type": "管理",
+  "storage_type": "存储",
+  "access_type": "接入",
+  "migration_type": "迁移",
+  "rdma_storage_type": "开启 RDMA 的存储",
+  "rdma_access_type": "启用 NVMe over  RDMA 的接入网络",
+  "iommu": "IOMMU 状态",
+  "enable_iommu": "启用 IOMMU",
+  "reboot_host_tooltip": "请重启主机，IOMMU 才会生效。",
+  "enable_iommu_title": "启用 IOMMU",
+  "confirm_enable_host_iommu": "确认启用主机 <1>{name}</1> 的 IOMMU 吗？",
+  "reboot_host_alert": "启用后，请重启主机，IOMMU 才会生效。",
+  "enable": "启用",
+  "not_support": "不支持",
+  "usb_devices_num": "USB 设备数",
+  "exiting_maintenance_mode": "正在退出...",
+  "information": "信息",
+  "scan_addable_host": "您也可以通过<0>自动扫描</0>发现主机。",
+  "scan_tip": "若物理交换机连接了较多设备，扫描可能花费较长时间。"
+}

package/src/locales/zh-CN/httpCode.json

@@ -0,0 +1,16 @@
+{
+  "Bad Request": "客户端请求的语法错误，服务器无法理解",
+  "Unauthorized": "请求要求用户的身份认证",
+  "Forbidden": "服务器理解请求客户端的请求，但是拒绝执行此请求",
+  "Not Found": "服务器无法根据客户端的请求找到资源",
+  "Method Not Allowed": "客户端请求中的方法被禁止",
+  "Not Acceptable": "服务器无法根据客户端请求的内容特性完成请求",
+  "Proxy Authentication Required": "请求要求代理的身份认证",
+  "Request Time-out": "服务器等待客户端发送的请求时间过长",
+  "Internal Server Error": "服务器内部错误，无法完成请求",
+  "Not Implemented": "服务器不支持请求的功能，无法完成请求",
+  "Bad Gateway": "作为网关或者代理工作的服务器尝试执行请求时，从远程服务器接收到了一个无效的响应",
+  "Service Unavailable": "由于超载或系统维护，服务器暂时的无法处理客户端的请求",
+  "Gateway Time-out": "充当网关或代理的服务器，未及时从远端服务器获取请求",
+  "HTTP Version not supported": "服务器不支持请求的HTTP协议的版本，无法完成处理"
+}

package/src/locales/zh-CN/index.ts

@@ -1 +1,217 @@
-export { default as basic } from "./basic.json";
+import alert from "./alert.json";
+import auditlog from "./auditLog.json";
+import backup from "./backup.json";
+import backupplan from "./backupPlan.json";
+import backuprestorepoint from "./backupRestorePoint.json";
+import backupstorerepository from "./backupStoreRepository.json";
+import basic from "./basic.json";
+import cloudtowerapplicationpackage from "./cloudTowerApplicationPackage.json";
+import cluster from "./cluster.json";
+import clusterupgrade from "./clusterUpgrade.json";
+import common from "./common.json";
+import components from "./components.json";
+import connection from "./connection.json";
+import consistencygroup from "./consistencyGroup.json";
+import consistencygroupsnapshot from "./consistencyGroupSnapshot.json";
+import contentlibraryimage from "./contentLibraryImage.json";
+import contentlibraryvmtemplate from "./contentLibraryVmTemplate.json";
+import datacenter from "./datacenter.json";
+import disk from "./disk.json";
+import elfdatastore from "./elfDataStore.json";
+import elfimage from "./elfImage.json";
+import entityfilter from "./entityFilter.json";
+import enumObj from "./enum.json";
+import error from "./error.json";
+import eventaudit from "./eventAudit.json";
+import everoute from "./everoute.json";
+import everoutecluster from "./everouteCluster.json";
+import everoutepackage from "./everoutePackage.json";
+import executePlan from "./execute_plan.json";
+import globalalertrule from "./globalAlertRule.json";
+import gpudevice from "./gpuDevice.json";
+import graph from "./graph.json";
+import hardwareTopo from "./hardware-topo.json";
+import host from "./host.json";
+import httpcode from "./httpCode.json";
+import installer from "./installer.json";
+import iscsiconnection from "./iscsiConnection.json";
+import iscsilun from "./iscsiLun.json";
+import iscsilunsnapshot from "./iscsiLunSnapshot.json";
+import iscsitarget from "./iscsiTarget.json";
+import isolationpolicy from "./isolationPolicy.json";
+import label from "./label.json";
+import logcollection from "./logCollection.json";
+import login from "./login.json";
+import maintenanceMode from "./maintenance-mode.json";
+import metric from "./metric.json";
+import migratetransmitter from "./migrateTransmitter.json";
+import monitor from "./monitor.json";
+import namespacegroup from "./namespaceGroup.json";
+import nfsexport from "./nfsExport.json";
+import nfsinode from "./nfsInode.json";
+import nic from "./nic.json";
+import nvmfconnection from "./nvmfConnection.json";
+import nvmfnamespace from "./nvmfNamespace.json";
+import nvmfnamespacesnapshot from "./nvmfNamespaceSnapshot.json";
+import nvmfsubsystem from "./nvmfSubsystem.json";
+import nvmfsubsystemsnapshot from "./nvmfSubsystemSnapshot.json";
+import overview from "./overview.json";
+import plugins from "./plugins.json";
+import pmemdimm from "./pmemDimm.json";
+import portal from "./portal.json";
+import recyclebin from "./recycleBin.json";
+import recyclevm from "./recycleVm.json";
+import reportTask from "./report-task.json";
+import reportTemplate from "./report-template.json";
+import reporttask from "./reportTask.json";
+import reporttemplate from "./reportTemplate.json";
+import requestcode from "./requestCode.json";
+import role from "./role.json";
+import securitygroup from "./securityGroup.json";
+import securitypolicy from "./securityPolicy.json";
+import setting from "./setting.json";
+import setup from "./setup.json";
+import snapshot from "./snapshot.json";
+import snapshotgroup from "./snapshotGroup.json";
+import snapshotplan from "./snapshotPlan.json";
+import snapshotplantask from "./snapshotPlanTask.json";
+import snmpTransport from "./snmp-transport.json";
+import snmpTrapReceiver from "./snmp-trap-receiver.json";
+import snmptransport from "./snmpTransport.json";
+import snmptrapreceiver from "./snmpTrapReceiver.json";
+import storage from "./storage.json";
+import svtimage from "./svtImage.json";
+import systemauditlog from "./systemAuditLog.json";
+import task from "./task.json";
+import title from "./title.json";
+import ui from "./ui.json";
+import usbdevice from "./usbDevice.json";
+import user from "./user.json";
+import userauditlog from "./userAuditLog.json";
+import userrolenext from "./userRoleNext.json";
+import validation from "./validation.json";
+import vds from "./vds.json";
+import view from "./view.json";
+import vlan from "./vlan.json";
+import vm from "./vm.json";
+import vmdisk from "./vmDisk.json";
+import vmentityfilterresult from "./vmEntityFilterResult.json";
+import vmfolder from "./vmFolder.json";
+import vmplacementgroup from "./vmPlacementGroup.json";
+import vmsnapshot from "./vmSnapshot.json";
+import vmtemplate from "./vmTemplate.json";
+import vmvolume from "./vmVolume.json";
+import vsphereesxiaccount from "./vsphereEsxiAccount.json";
+import witness from "./witness.json";
+import zone from "./zone.json";
+
+const locale = {
+  alert: alert,
+  auditLog: auditlog,
+  backup: backup,
+  backupPlan: backupplan,
+  backupRestorePoint: backuprestorepoint,
+  backupStoreRepository: backupstorerepository,
+  basic: basic,
+  cloudTowerApplicationPackage: cloudtowerapplicationpackage,
+  cluster: cluster,
+  clusterUpgrade: clusterupgrade,
+  common: common,
+  components: components,
+  connection: connection,
+  consistencyGroup: consistencygroup,
+  consistencyGroupSnapshot: consistencygroupsnapshot,
+  contentLibraryImage: contentlibraryimage,
+  contentLibraryVmTemplate: contentlibraryvmtemplate,
+  datacenter: datacenter,
+  disk: disk,
+  elfDataStore: elfdatastore,
+  elfImage: elfimage,
+  entityFilter: entityfilter,
+  enum: enumObj,
+  error: error,
+  eventAudit: eventaudit,
+  everoute: everoute,
+  everouteCluster: everoutecluster,
+  everoutePackage: everoutepackage,
+  execute_plan: executePlan,
+  globalAlertRule: globalalertrule,
+  gpuDevice: gpudevice,
+  graph: graph,
+  "hardware-topo": hardwareTopo,
+  host: host,
+  httpCode: httpcode,
+  installer: installer,
+  iscsiConnection: iscsiconnection,
+  iscsiLun: iscsilun,
+  iscsiLunSnapshot: iscsilunsnapshot,
+  iscsiTarget: iscsitarget,
+  isolationPolicy: isolationpolicy,
+  label: label,
+  logCollection: logcollection,
+  login: login,
+  "maintenance-mode": maintenanceMode,
+  metric: metric,
+  migrateTransmitter: migratetransmitter,
+  monitor: monitor,
+  namespaceGroup: namespacegroup,
+  nfsExport: nfsexport,
+  nfsInode: nfsinode,
+  nic: nic,
+  nvmfConnection: nvmfconnection,
+  nvmfNamespace: nvmfnamespace,
+  nvmfNamespaceSnapshot: nvmfnamespacesnapshot,
+  nvmfSubsystem: nvmfsubsystem,
+  nvmfSubsystemSnapshot: nvmfsubsystemsnapshot,
+  overview: overview,
+  plugins: plugins,
+  pmemDimm: pmemdimm,
+  portal: portal,
+  recycleBin: recyclebin,
+  recycleVm: recyclevm,
+  "report-task": reportTask,
+  "report-template": reportTemplate,
+  reportTask: reporttask,
+  reportTemplate: reporttemplate,
+  requestCode: requestcode,
+  role: role,
+  securityGroup: securitygroup,
+  securityPolicy: securitypolicy,
+  setting: setting,
+  setup: setup,
+  snapshot: snapshot,
+  snapshotGroup: snapshotgroup,
+  snapshotPlan: snapshotplan,
+  snapshotPlanTask: snapshotplantask,
+  "snmp-transport": snmpTransport,
+  "snmp-trap-receiver": snmpTrapReceiver,
+  snmpTransport: snmptransport,
+  snmpTrapReceiver: snmptrapreceiver,
+  storage: storage,
+  svtImage: svtimage,
+  systemAuditLog: systemauditlog,
+  task: task,
+  title: title,
+  ui: ui,
+  usbDevice: usbdevice,
+  user: user,
+  userAuditLog: userauditlog,
+  userRoleNext: userrolenext,
+  validation: validation,
+  vds: vds,
+  view: view,
+  vlan: vlan,
+  vm: vm,
+  vmDisk: vmdisk,
+  vmEntityFilterResult: vmentityfilterresult,
+  vmFolder: vmfolder,
+  vmPlacementGroup: vmplacementgroup,
+  vmSnapshot: vmsnapshot,
+  vmTemplate: vmtemplate,
+  vmVolume: vmvolume,
+  vsphereEsxiAccount: vsphereesxiaccount,
+  witness: witness,
+  zone: zone,
+};
+
+export default locale;