@clemrig/factory 0.11.0 → 0.12.0

package/README.md

@@ -312,7 +312,7 @@ The run executes in the foreground. The terminal shows each stage's start and en
 
 **Resume.** `factory resume RUN_ID` runs a failed run again in the foreground, under the same ID, at the stage where it stopped (with `--accept-review`, an `implement` or `tidy` run its review stopped by asking for changes is delivered as the review left it: see The pull request): its input, data, corrections, cost and agents' conversations are kept, the stage's journal starts with why the run had stopped (`Resumed after: …`), and its agent is told so and asked to continue rather than start over. The workflow is the one `factory.ts` defines now, its prompts are read again, and its runtimes are checked as for `factory run`. The budget is the one given with `--max-cost-usd`, else the run's own, else the workflow's; a run that already spent it does not resume without a higher one. The run's budget still counts its whole cost, but calls that announced no cost before the resumption, such as a call stopped by its timeout, no longer fail it; their cost counts only if the runtime includes it in the total it later announces for the resumed session, and the run's cost stays marked partial. The run's duration leaves out the time it spent stopped. Only a failed run resumes, and by one command at a time: a run left `running` after a second Ctrl-C does not, and a workflow may refuse to resume from the state of the repository, as `implement` does. A resumed stage starts over: what it did before it failed must be safe to do again. A run stopped by a correction maximum resumes at the stage that asked for it, which may then take one more correction: the checks may pass after a fix by hand, and a gate judging the same answer sends it back once more.
 
-`factory status` lists the repository's runs or shows one; while `factory.ts` cannot load, `status` and `ui` say so and still show the runs with the default rendering. `factory ui` serves on `127.0.0.1` (port chosen by the system unless `--port` sets it, URL printed; Ctrl-C stops it) the Kanban on `/` and, under `/runs/`, a read-only dashboard of the repository's runs: the runs with workflow, status, current stage, duration, estimated cost and last update, and for a run its runtimes, its launches (the first one, then each resumption), each with a strip of its stages sized by duration, then its stages beside the selected one's detail (start, duration, outcome, the agent call's model, settings, tools and tokens as they come, a folded Output section with the agent's answer and the correction sent back or not, the journal and the tool calls), the correction counters and the result. It follows a running run as it goes. To watch on another machine, forward the same port through SSH: `ssh -L 4321:127.0.0.1:4321 machine`, run `factory ui --port 4321` there, and open `http://localhost:4321/`. `factory doctor` checks Node, loads the workflows, reads their prompts, lists each workflow's options and checks each runtime's executable, version and connection, without any provider request.
+`factory status` lists the repository's runs or shows one; while `factory.ts` cannot load, `status` and `ui` say so and still show the runs with the default rendering. `factory ui` serves on `127.0.0.1` (port chosen by the system unless `--port` sets it, URL printed; Ctrl-C stops it) the Kanban on `/` and, under `/runs/`, a read-only dashboard of the repository's runs, with a Board link back to the Kanban: the runs in a rail grouped by day, named by their issue, filtered and searched; for a run its figures and links, its launches on one bar with the pauses between them and why each stopped, its stage executions in lanes over its active time with its rounds and corrections, then the selected execution's panel (Overview, Input with the correction it received, Output with the agent's answer and the correction sent back or not, Activity with its calls, tool calls, journal and warnings in one timeline), beside its cost by session and over time, its result with its links and its data as a tree. The address keeps the run, the execution and the tab. It follows a running run as it goes. To watch on another machine, forward the same port through SSH: `ssh -L 4321:127.0.0.1:4321 machine`, run `factory ui --port 4321` there, and open `http://localhost:4321/`. `factory doctor` checks Node, loads the workflows, reads their prompts, lists each workflow's options and checks each runtime's executable, version and connection, without any provider request.
 
 ## Data
 

package/dist/cli/ui.js

@@ -14,6 +14,8 @@ export async function ui(factory, port, loadError) {
         title: "factory",
         label,
         presentResult: (state) => presentResult(factory, state),
+        // Mounted under `/runs/`: the Kanban is one level up.
+        home: { label: "Board", href: "../" },
     });
     const page = await startFactoryUi({
         title: "factory",

package/dist/cli/ui.js.map

@@ -1 +1 @@
-{"version":3,"file":"ui.js","sourceRoot":"","sources":["../../src/cli/ui.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,QAAQ,EAAE,MAAM,WAAW,CAAC;AACrC,OAAO,EAAc,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACjE,OAAO,EAAE,gBAAgB,EAAE,MAAM,kBAAkB,CAAC;AACpD,OAAO,EAAE,SAAS,EAAE,MAAM,iBAAiB,CAAC;AAE5C,OAAO,EAAE,aAAa,EAAE,MAAM,gBAAgB,CAAC;AAE/C;;;GAGG;AACH,MAAM,CAAC,KAAK,UAAU,EAAE,CACtB,OAAgB,EAChB,IAAa,EACb,SAAkB;IAElB,MAAM,KAAK,GAAG,QAAQ,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC;IACpC,MAAM,IAAI,GAAG,MAAM,gBAAgB,CAAC;QAClC,OAAO,EAAE,OAAO,CAAC,OAAO;QACxB,KAAK,EAAE,SAAS;QAChB,KAAK;QACL,aAAa,EAAE,CAAC,KAAK,EAAE,EAAE,CAAC,aAAa,CAAC,OAAO,EAAE,KAAK,CAAC;KACxD,CAAC,CAAC;IACH,MAAM,IAAI,GAAG,MAAM,cAAc,CAC/B;QACE,KAAK,EAAE,SAAS;QAChB,KAAK;QACL,wFAAwF;QACxF,KAAK,EAAE,GAAmB,EAAE,CAAC,SAAS,CAAC,OAAO,EAAE,SAAS,CAAC;QAC1D,IAAI;KACL,EACD,IAAI,CACL,CAAC;IACF,OAAO,CAAC,MAAM,CAAC,KAAK,CAClB,eAAe,IAAI,CAAC,GAAG,WAAW,IAAI,CAAC,GAAG,qCAAqC,CAChF,CAAC;IACF,MAAM,IAAI,OAAO,CAAO,CAAC,OAAO,EAAE,EAAE;QAClC,MAAM,IAAI,GAAG,GAAG,EAAE;YAChB,OAAO,CAAC,GAAG,CAAC,QAAQ,EAAE,IAAI,CAAC,CAAC;YAC5B,OAAO,CAAC,GAAG,CAAC,SAAS,EAAE,IAAI,CAAC,CAAC;YAC7B,OAAO,EAAE,CAAC;QACZ,CAAC,CAAC;QACF,OAAO,CAAC,EAAE,CAAC,QAAQ,EAAE,IAAI,CAAC,CAAC;QAC3B,OAAO,CAAC,EAAE,CAAC,SAAS,EAAE,IAAI,CAAC,CAAC;IAC9B,CAAC,CAAC,CAAC;IACH,MAAM,IAAI,CAAC,KAAK,EAAE,CAAC;IACnB,OAAO,CAAC,CAAC;AACX,CAAC"}
+{"version":3,"file":"ui.js","sourceRoot":"","sources":["../../src/cli/ui.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,QAAQ,EAAE,MAAM,WAAW,CAAC;AACrC,OAAO,EAAc,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACjE,OAAO,EAAE,gBAAgB,EAAE,MAAM,kBAAkB,CAAC;AACpD,OAAO,EAAE,SAAS,EAAE,MAAM,iBAAiB,CAAC;AAE5C,OAAO,EAAE,aAAa,EAAE,MAAM,gBAAgB,CAAC;AAE/C;;;GAGG;AACH,MAAM,CAAC,KAAK,UAAU,EAAE,CACtB,OAAgB,EAChB,IAAa,EACb,SAAkB;IAElB,MAAM,KAAK,GAAG,QAAQ,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC;IACpC,MAAM,IAAI,GAAG,MAAM,gBAAgB,CAAC;QAClC,OAAO,EAAE,OAAO,CAAC,OAAO;QACxB,KAAK,EAAE,SAAS;QAChB,KAAK;QACL,aAAa,EAAE,CAAC,KAAK,EAAE,EAAE,CAAC,aAAa,CAAC,OAAO,EAAE,KAAK,CAAC;QACvD,sDAAsD;QACtD,IAAI,EAAE,EAAE,KAAK,EAAE,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE;KACtC,CAAC,CAAC;IACH,MAAM,IAAI,GAAG,MAAM,cAAc,CAC/B;QACE,KAAK,EAAE,SAAS;QAChB,KAAK;QACL,wFAAwF;QACxF,KAAK,EAAE,GAAmB,EAAE,CAAC,SAAS,CAAC,OAAO,EAAE,SAAS,CAAC;QAC1D,IAAI;KACL,EACD,IAAI,CACL,CAAC;IACF,OAAO,CAAC,MAAM,CAAC,KAAK,CAClB,eAAe,IAAI,CAAC,GAAG,WAAW,IAAI,CAAC,GAAG,qCAAqC,CAChF,CAAC;IACF,MAAM,IAAI,OAAO,CAAO,CAAC,OAAO,EAAE,EAAE;QAClC,MAAM,IAAI,GAAG,GAAG,EAAE;YAChB,OAAO,CAAC,GAAG,CAAC,QAAQ,EAAE,IAAI,CAAC,CAAC;YAC5B,OAAO,CAAC,GAAG,CAAC,SAAS,EAAE,IAAI,CAAC,CAAC;YAC7B,OAAO,EAAE,CAAC;QACZ,CAAC,CAAC;QACF,OAAO,CAAC,EAAE,CAAC,QAAQ,EAAE,IAAI,CAAC,CAAC;QAC3B,OAAO,CAAC,EAAE,CAAC,SAAS,EAAE,IAAI,CAAC,CAAC;IAC9B,CAAC,CAAC,CAAC;IACH,MAAM,IAAI,CAAC,KAAK,EAAE,CAAC;IACnB,OAAO,CAAC,CAAC;AACX,CAAC"}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@clemrig/factory",
-  "version": "0.11.0",
+  "version": "0.12.0",
   "description": "Take a repository's issues from spec to pull request with agents, watch them on a local Kanban, and run the repository's own workflows",
   "license": "MIT",
   "repository": {
@@ -41,6 +41,6 @@
   "dependencies": {
     "@clemrig/factory-ui": "0.2.0",
     "@clemrig/flow": "0.7.1",
-    "@clemrig/flow-ui": "0.5.1"
+    "@clemrig/flow-ui": "0.6.0"
   }
 }