@ckanner/flywheel 0.28.4 → 0.28.5

package/CHANGELOG.md

@@ -1,5 +1,9 @@
 # Changelog
 
+## 0.28.5
+
+- 将 Flywheel 自定义会话视图排到内置“对话／轨迹／统计”之后，保持内置视图顺序；不修改宿主 DOM，不改变任务、模型和权限行为。六包统一 0.28.5。
+
 ## 0.28.4
 
 - DSH 兼容声明覆盖已核对的 0.2.1-rc.5 与 0.2.2-rc.1，并同步 Cordis 4.0／4.1 和 host peer 范围；未知版本继续由宿主拒绝，不需要版本豁免。

package/README.en.md

@@ -4,7 +4,7 @@ English | [简体中文](README.md)
 
 Flywheel turns reviewed software requirements into bounded coding tasks with explicit acceptance criteria. A deterministic Go engine runs Plan, Execute, Review, and verification loops. Models propose plans, implement changes, and review candidates; the engine owns state, retries, budgets, workspaces, verification, local Git delivery, and stopping.
 
-This source targets **0.28.4**, including account defaults, account-error handling, and the current session directory. Check the npm registry before installing; merging source does not update an installed package. The desktop integration covers the checked **DSH Mac 0.2.1-rc.5 and 0.2.2-rc.1** interfaces. Version 0.28.4 declares only these two runtime versions. Check the registry before installing a version. Offline tests do not establish a live user Mac, account, or model pass.
+This source targets **0.28.5**, including account defaults, account-error handling, and the current session directory. Check the npm registry before installing; merging source does not update an installed package. The desktop integration covers the checked **DSH Mac 0.2.1-rc.5 and 0.2.2-rc.1** interfaces. Version 0.28.4 declares only these two runtime versions. Check the registry before installing a version. Offline tests do not establish a live user Mac, account, or model pass.
 
 ## Install
 
@@ -86,7 +86,7 @@ Packet delivery is a **local Git operation**. After evidence matches the current
 
 ### Desktop task controls
 
-From `0.28.1`, the native **Flywheel** conversation view appears alongside Chat and Trajectory, preserving DSH's composer, model selector, and right sidebar. Version `0.28.0` uses the old composer popup; upgrade the CLI and desktop plugin together. **Task files directory** selects the prepared `docs/<slug>/`; **Project directory** is its project/integration worktree and may stay blank. From 0.28.3, Flywheel reads DSH's `workingDirectory.get(session)`, following session directory changes. Version 0.28.2 still uses the original header directory: explicitly fill the project path after switching worktrees. Configuration and diagnostics can omit the task; start, refresh, and stop require an existing task directory.
+From `0.28.1`, the native **Flywheel** conversation view appears alongside the built-in views (after Statistics from 0.28.5), preserving DSH's composer, model selector, and right sidebar. Version `0.28.0` uses the old composer popup; upgrade the CLI and desktop plugin together. **Task files directory** selects the prepared `docs/<slug>/`; **Project directory** is its project/integration worktree and may stay blank. From 0.28.3, Flywheel reads DSH's `workingDirectory.get(session)`, following session directory changes. Version 0.28.2 still uses the original header directory: explicitly fill the project path after switching worktrees. Configuration and diagnostics can omit the task; start, refresh, and stop require an existing task directory.
 
 The view retains session-scoped drafts while the host retains the session binding and shows snapshots with their refresh time. It does not discover tasks or poll automatically. An unconfirmed start/stop outcome requires a successful refresh of the same task before further mutations; closing or switching the view does not stop the independent engine. DSH's trajectory keeps its parent-session records, without automatically merging independent worker history. Desktop capabilities and SDK worker policy have separate scopes; see the [plugin guide](https://github.com/ckanner/flywheel/blob/main/plugins/dsh/README.en.md#use-the-desktop-controls).
 

package/README.md

@@ -4,7 +4,7 @@
 
 Flywheel 用确定性 Go 引擎驱动 Plan、Execute、Review 和分层验收，把已经明确的需求变成有边界、可验证、可持久化的软件交付。模型负责规划、实现和评审；引擎负责状态、重试、预算、工作区、验收、提交与停止。
 
-当前源码的统一发行目标为 **v0.28.4**，使用 DSH Mac 桌面为入口：Kimi CLI 规划，DSH 原生 DeepSeek Flash 执行，DSH 原生 GPT 评审，较难的执行任务默认走 Codex Pro 插件的公开 machine API。0.28.3 包含 DeepSeek 账号默认、账号错误分类与会话当前目录修复；安装前核对 npm registry，源码合并不会更新已安装的包。DSH 插件提供控制面板、配置查看和安装预检；具名 model profiles 可复用于不同阶段，Go 仍是唯一状态所有者。设计依据见 [docs/design.md](docs/design.md)，仓库约束见 [AGENTS.md](AGENTS.md)。
+当前源码的统一发行目标为 **v0.28.5**，使用 DSH Mac 桌面为入口：Kimi CLI 规划，DSH 原生 DeepSeek Flash 执行，DSH 原生 GPT 评审，较难的执行任务默认走 Codex Pro 插件的公开 machine API。0.28.3 包含 DeepSeek 账号默认、账号错误分类与会话当前目录修复；安装前核对 npm registry，源码合并不会更新已安装的包。DSH 插件提供控制面板、配置查看和安装预检；具名 model profiles 可复用于不同阶段，Go 仍是唯一状态所有者。设计依据见 [docs/design.md](docs/design.md)，仓库约束见 [AGENTS.md](AGENTS.md)。
 
 **本教程适用于 0.28.0 及以后的完整 npm 发行版。** 安装前用 `npm view @ckanner/flywheel version` 确认 registry 的 latest 已更新到所需版本；源码合并或 GitHub Release 不代表 npm 已发行。旧 0.22.1 没有本教程使用的安装与 DSH 接口，当前发行状态见[发行记录](docs/releasing.md#3-失败恢复)。
 
@@ -130,7 +130,7 @@ flywheel config inspect --cwd /repo --task-dir /repo/docs/my-task --json
 
 先在目标 Git 仓库准备并审阅 `docs/<slug>/` 中的 Spec、packet 与配置：需求编号、L1/L2/L3 命令、禁止修改的验收路径和失败出口都应明确。DSH 输入框用 `/flywheel-new` 调用准备 Skill，审阅后用 `/flywheel-run`；Kimi CLI 的对应语法是 `/skill:flywheel-new`、`/skill:flywheel-run`。两者都是宿主加载 Skill 后让助手按流程调用 CLI，不是另一个引擎。完整步骤见[工作流](docs/workflow.md)，无需先填面板。
 
-从 `0.28.1` 开始，桌面控制面接入顶部“对话／轨迹”旁的原生 **Flywheel** 会话视图，保留 DSH 输入区、模型选择器和右侧栏。`0.28.0` 仍是旧底部弹层，需把 CLI 与桌面插件同版升级。“任务资料目录”选择已准备的 `docs/<slug>/`；“项目目录”是任务所在项目／集成 worktree，可留空。从 0.28.3 开始通过 DSH `workingDirectory.get(session)` 读取会话实际目录，跟随目录切换；0.28.2 仍取最初的 header 目录，切换 worktree 后需显式填写项目路径。查看配置或检查接入可不填任务目录；启动、刷新和停止必须选择已有任务。视图展示最近刷新的结果、完整 packet 列表与未知用量，模型配置和诊断按需查看，原始 JSON 默认折叠。也可使用人工命令：
+从 `0.28.1` 开始，桌面控制面接入顶部原生 **Flywheel** 会话视图（从 0.28.5 起排在内置“统计”之后），保留 DSH 输入区、模型选择器和右侧栏。`0.28.0` 仍是旧底部弹层，需把 CLI 与桌面插件同版升级。“任务资料目录”选择已准备的 `docs/<slug>/`；“项目目录”是任务所在项目／集成 worktree，可留空。从 0.28.3 开始通过 DSH `workingDirectory.get(session)` 读取会话实际目录，跟随目录切换；0.28.2 仍取最初的 header 目录，切换 worktree 后需显式填写项目路径。查看配置或检查接入可不填任务目录；启动、刷新和停止必须选择已有任务。视图展示最近刷新的结果、完整 packet 列表与未知用量，模型配置和诊断按需查看，原始 JSON 默认折叠。也可使用人工命令：
 
 ```text
 /flywheel {"action":"status","taskDir":"/repo/docs/my-task","cwd":"/repo"}

package/docs/en/getting-started.md

@@ -2,7 +2,7 @@
 
 [English README](../../README.en.md) · [中文](../getting-started.md) · [Workflow](workflow.md) · [Configuration](configuration.md)
 
-This guide covers **Flywheel 0.28.4**: npm installation, the DSH desktop and workers, configuration, preflight, a small task, and recovery. The checked desktop interfaces are **DSH Mac 0.2.1-rc.5 and 0.2.2-rc.1**, both declared from Flywheel 0.28.4. DSH 0.2.2 itself requires Node 24.9 or later; use its official desktop-supplied CLI. Real desktop UI, macOS permissions, authentication, and model inference still need testing on the intended machine.
+This guide covers **Flywheel 0.28.5**: npm installation, the DSH desktop and workers, configuration, preflight, a small task, and recovery. The checked desktop interfaces are **DSH Mac 0.2.1-rc.5 and 0.2.2-rc.1**, both declared from Flywheel 0.28.4. DSH 0.2.2 itself requires Node 24.9 or later; use its official desktop-supplied CLI. Real desktop UI, macOS permissions, authentication, and model inference still need testing on the intended machine.
 
 Before installing, check `npm view @ckanner/flywheel version`. Continue with these instructions once the registry has the version you intend to use. A merged source change or GitHub Release does not establish npm publication, and an older installed release may not include these interfaces.
 
@@ -10,6 +10,8 @@ The top-level **Flywheel conversation view** below is available from `0.28.1`. V
 
 Subscription preset migration and `permissions.mode` are available from **0.28.2**. Upgrades preserve existing configuration; preview `flywheel config migrate --preset subscriptions`, review the model bindings and full-access policy, then explicitly apply it with `--apply` and a backup.
 
+**Ordering from 0.28.5:** the external Flywheel conversation view follows the built-in Statistics view. DSH still owns view selection and overflow navigation.
+
 **Fixes in 0.28.3:** the `deepseek-account` default and the current session directory when the project path is omitted. Version 0.28.2 still uses `deepseek-official` and the original directory. Check the registry version before installing. Upgrades preserve configuration; adopting the account preset requires explicit migration.
 
 ## 1. Prepare the environment

package/docs/getting-started.md

@@ -10,6 +10,8 @@
 
 订阅预设迁移命令与 `permissions.mode` 从 **0.28.2** 开始提供。升级不会自动替换已有配置；先预览 `flywheel config migrate --preset subscriptions`，确认模型和完全权限后再以 `--apply` 应用并备份。
 
+**0.28.5 排序**：Flywheel 自定义会话视图排在内置“统计”之后，视图的打开与溢出菜单仍由 DSH 管理。
+
 **0.28.3 修复**：下文的 `deepseek-account` 默认和留空目录读取会话当前工作目录从 0.28.3 开始提供。0.28.2 仍使用 `deepseek-official` 与最初目录。安装前核对 registry 版本；升级保留已有配置，采用账号预设需要显式迁移。
 
 ## 目录

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@ckanner/flywheel",
-  "version": "0.28.4",
+  "version": "0.28.5",
   "description": "A deterministic Go orchestrator for coding-agent loops, with task contracts, verification gates, Git worktrees, and DSH desktop integration.",
   "bin": {
     "flywheel": "bin/flywheel.js",
@@ -40,10 +40,10 @@
     "docs/examples/create-first-task.sh"
   ],
   "optionalDependencies": {
-    "@ckanner/flywheel-darwin-arm64": "0.28.4",
-    "@ckanner/flywheel-darwin-amd64": "0.28.4",
-    "@ckanner/flywheel-linux-arm64": "0.28.4",
-    "@ckanner/flywheel-linux-amd64": "0.28.4"
+    "@ckanner/flywheel-darwin-arm64": "0.28.5",
+    "@ckanner/flywheel-darwin-amd64": "0.28.5",
+    "@ckanner/flywheel-linux-arm64": "0.28.5",
+    "@ckanner/flywheel-linux-amd64": "0.28.5"
   },
   "scripts": {
     "release:check": "node scripts/release-preflight.js",
@@ -51,9 +51,9 @@
     "test": "node --test npm/test/*.test.js",
     "test:install": "node --test npm/test/install.integration.js",
     "test:registry": "node npm/test/registry-smoke.js",
-    "build:npm": "bash scripts/build-npm.sh 0.28.4 dist-npm"
+    "build:npm": "bash scripts/build-npm.sh 0.28.5 dist-npm"
   },
   "dependencies": {
-    "@ckanner/dsh-plugin-flywheel": "0.28.4"
+    "@ckanner/dsh-plugin-flywheel": "0.28.5"
   }
 }