@cdklabs/cdk-ssm-documents 0.0.62 → 0.0.64

package/node_modules/@aws-sdk/client-ec2/dist-types/models/models_4.d.ts

@@ -1,8 +1,278 @@
 import type { _InstanceType, ActivityStatus, AllocationStrategy, AmdSevSnpSpecification, AnalysisStatus, ArchitectureType, ArchitectureValues, AttachmentLimitType, AttachmentStatus, BandwidthWeightingType, BatchState, BootModeType, BootModeValues, CapacityReservationPreference, CurrencyCodeValues, DeviceType, DiskType, EbsEncryptionSupport, EbsNvmeSupport, EbsOptimizedSupport, EnaSupport, EphemeralNvmeSupport, EventCode, EventType, ExcessCapacityTerminationPolicy, FindingsFound, FleetType, FlexibleEnaQueuesSupport, HaStatus, HostnameType, HttpTokensState, HypervisorType, ImageState, InstanceAutoRecoveryState, InstanceBandwidthWeighting, InstanceBootModeValues, InstanceInterruptionBehavior, InstanceLifecycleType, InstanceMetadataEndpointState, InstanceMetadataOptionsState, InstanceMetadataProtocolState, InstanceMetadataTagsState, InstanceRebootMigrationState, InstanceStateName, InstanceStorageEncryptionSupport, InstanceTypeHypervisor, KeyType, LocationType, LockState, MonitoringState, MoveStatus, NestedVirtualizationSpecification, NetworkInterfaceAttribute, NetworkInterfaceStatus, NitroEnclavesSupport, NitroTpmSupport, OfferingClassType, OfferingTypeValues, OnDemandAllocationStrategy, PermissionGroup, PhcSupport, PlacementGroupStrategy, PlatformValues, RebootMigrationSupport, RecurringChargeFrequency, ReplacementStrategy, ReservedInstanceState, ResourceType, RIProductDescription, RootDeviceType, Scope, SecondaryInterfaceStatus, SecondaryInterfaceType, SecondaryNetworkType, SecurityGroupVpcAssociationState, ServiceLinkVirtualInterfaceConfigurationState, SnapshotAttributeName, SnapshotState, SpotInstanceState, SpotInstanceType, SqlServerLicenseUsage, StatusName, StatusType, StorageTier, SummaryStatus, SupportedAdditionalProcessorFeature, TargetCapacityUnitType, Tenancy, TieringOperationStatus, UsageClassType, VirtualizationType } from "./enums";
-import type { ActiveInstance, AlternatePathHint, Explanation, IamInstanceProfile, IamInstanceProfileSpecification, InstanceEventWindow, IpamPoolAllocation, IpamResourceDiscoveryAssociation, IpPermission, OperatorResponse, PathComponent, ReservedInstancesListing, SecurityGroupRule, Tag, TagSpecification, UserIdGroupPair } from "./models_0";
-import type { AttributeValue, BlockDeviceMapping, CapacityReservationTargetResponse, ConnectionTrackingSpecificationRequest, EnaSrdSpecificationRequest, FleetLaunchTemplateSpecification, GroupIdentifier, InstanceIpv6Address, InstanceRequirements, InternetGateway, Ipam, IpamExternalResourceVerificationToken, IpamPolicy, IpamPool, IpamPrefixListResolver, IpamPrefixListResolverTarget, IpamResourceDiscovery, IpamScope, Ipv4PrefixSpecificationRequest, Ipv6PrefixSpecificationRequest, LaunchTemplate, LaunchTemplateVersion, LocalGatewayRouteTable, LocalGatewayRouteTableVirtualInterfaceGroupAssociation, LocalGatewayRouteTableVpcAssociation, LocalGatewayVirtualInterface, LocalGatewayVirtualInterfaceGroup, MacModificationTask, ManagedPrefixList, NatGateway, NetworkAcl, NetworkInsightsAccessScope, NetworkInsightsPath, NetworkInterface, NetworkInterfaceAttachment, NetworkInterfacePermission, Placement, PlacementGroup, PrivateIpAddressSpecification, ReplaceRootVolumeTask, RouteServer, RouteServerEndpoint, RouteServerPeer, RouteTable, StateReason } from "./models_1";
-import type { SecondaryNetwork, SecondarySubnet, Snapshot, SpotDatafeedSubscription, SpotInstanceStateFault } from "./models_2";
-import type { AttributeBooleanValue, Byoasn, EnclaveOptions, EventInformation, Filter, IdFormat, InstanceBlockDeviceMapping, InstanceTagNotificationAttribute, ProductCode } from "./models_3";
+import type { ActiveInstance, AlternatePathHint, Explanation, IamInstanceProfile, IamInstanceProfileSpecification, InstanceEventWindow, IpamPoolAllocation, IpamResourceDiscoveryAssociation, IpPermission, OperatorResponse, PathComponent, ReservedInstancesListing, SecurityGroupRule, Tag, TagSpecification } from "./models_0";
+import type { AttributeValue, BlockDeviceMapping, CapacityReservationTargetResponse, ConnectionTrackingSpecificationRequest, Ec2InstanceConnectEndpoint, EnaSrdSpecificationRequest, FleetLaunchTemplateSpecification, GroupIdentifier, InstanceIpv6Address, InstanceRequirements, InternetGateway, Ipam, IpamExternalResourceVerificationToken, IpamPolicy, IpamPool, IpamPrefixListResolver, IpamPrefixListResolverTarget, IpamResourceDiscovery, IpamScope, Ipv4PrefixSpecificationRequest, Ipv6PrefixSpecificationRequest, LaunchTemplate, LaunchTemplateVersion, LocalGatewayRouteTable, LocalGatewayRouteTableVirtualInterfaceGroupAssociation, LocalGatewayRouteTableVpcAssociation, LocalGatewayVirtualInterface, LocalGatewayVirtualInterfaceGroup, MacModificationTask, ManagedPrefixList, NatGateway, NetworkAcl, NetworkInsightsAccessScope, NetworkInsightsPath, NetworkInterface, NetworkInterfaceAttachment, NetworkInterfacePermission, Placement, PlacementGroup, PrivateIpAddressSpecification, ReplaceRootVolumeTask, RouteServer, RouteServerEndpoint, RouteServerPeer, StateReason } from "./models_1";
+import type { RouteTable, SecondaryNetwork, SecondarySubnet, Snapshot, SpotDatafeedSubscription, SpotInstanceStateFault } from "./models_2";
+import type { Byoasn, EventInformation, Filter, IdFormat, InstanceTagNotificationAttribute, ProductCode } from "./models_3";
+/**
+ * <p>Describes a parameter used to set up an EBS volume in a block device mapping.</p>
+ * @public
+ */
+export interface EbsInstanceBlockDevice {
+    /**
+     * <p>The time stamp when the attachment initiated.</p>
+     * @public
+     */
+    AttachTime?: Date | undefined;
+    /**
+     * <p>Indicates whether the volume is deleted on instance termination.</p>
+     * @public
+     */
+    DeleteOnTermination?: boolean | undefined;
+    /**
+     * <p>The attachment state.</p>
+     * @public
+     */
+    Status?: AttachmentStatus | undefined;
+    /**
+     * <p>The ID of the EBS volume.</p>
+     * @public
+     */
+    VolumeId?: string | undefined;
+    /**
+     * <p>The ARN of the Amazon Web Services-managed resource
+     *             to which the volume is attached.</p>
+     * @public
+     */
+    AssociatedResource?: string | undefined;
+    /**
+     * <p>The ID of the Amazon Web Services account that owns the volume.</p>
+     *          <p>This parameter is returned only for volumes that are attached to
+     *             Amazon Web Services-managed resources.</p>
+     * @public
+     */
+    VolumeOwnerId?: string | undefined;
+    /**
+     * <p>The service provider that manages the EBS volume.</p>
+     * @public
+     */
+    Operator?: OperatorResponse | undefined;
+    /**
+     * <p>The index of the EBS card. Some instance types support multiple EBS cards. The default EBS card index is 0.</p>
+     * @public
+     */
+    EbsCardIndex?: number | undefined;
+}
+/**
+ * <p>Describes a block device mapping.</p>
+ * @public
+ */
+export interface InstanceBlockDeviceMapping {
+    /**
+     * <p>The device name.</p>
+     * @public
+     */
+    DeviceName?: string | undefined;
+    /**
+     * <p>Parameters used to automatically set up EBS volumes when the instance is
+     *             launched.</p>
+     * @public
+     */
+    Ebs?: EbsInstanceBlockDevice | undefined;
+}
+/**
+ * <p>Describes a value for a resource attribute that is a Boolean value.</p>
+ * @public
+ */
+export interface AttributeBooleanValue {
+    /**
+     * <p>The attribute value. The valid values are <code>true</code> or <code>false</code>.</p>
+     * @public
+     */
+    Value?: boolean | undefined;
+}
+/**
+ * <p>Indicates whether the instance is enabled for Amazon Web Services Nitro
+ *             Enclaves.</p>
+ * @public
+ */
+export interface EnclaveOptions {
+    /**
+     * <p>If this parameter is set to <code>true</code>, the instance is enabled for Amazon Web Services Nitro Enclaves; otherwise, it is not enabled for Amazon Web Services Nitro
+     *             Enclaves.</p>
+     * @public
+     */
+    Enabled?: boolean | undefined;
+}
+/**
+ * <p>Describes an instance attribute.</p>
+ * @public
+ */
+export interface InstanceAttribute {
+    /**
+     * <p>The block device mapping of the instance.</p>
+     * @public
+     */
+    BlockDeviceMappings?: InstanceBlockDeviceMapping[] | undefined;
+    /**
+     * <p>Indicates whether termination protection is enabled. If the value is <code>true</code>,
+     *             you can't terminate the instance using the Amazon EC2 console, command line tools, or API.</p>
+     * @public
+     */
+    DisableApiTermination?: AttributeBooleanValue | undefined;
+    /**
+     * <p>Indicates whether enhanced networking with ENA is enabled.</p>
+     * @public
+     */
+    EnaSupport?: AttributeBooleanValue | undefined;
+    /**
+     * <p>Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.</p>
+     * @public
+     */
+    EnclaveOptions?: EnclaveOptions | undefined;
+    /**
+     * <p>Indicates whether the instance is optimized for Amazon EBS I/O.</p>
+     * @public
+     */
+    EbsOptimized?: AttributeBooleanValue | undefined;
+    /**
+     * <p>The ID of the instance.</p>
+     * @public
+     */
+    InstanceId?: string | undefined;
+    /**
+     * <p>Indicates whether an instance stops or terminates when you initiate shutdown from the
+     *             instance (using the operating system command for system shutdown).</p>
+     * @public
+     */
+    InstanceInitiatedShutdownBehavior?: AttributeValue | undefined;
+    /**
+     * <p>The instance type.</p>
+     * @public
+     */
+    InstanceType?: AttributeValue | undefined;
+    /**
+     * <p>The kernel ID.</p>
+     * @public
+     */
+    KernelId?: AttributeValue | undefined;
+    /**
+     * <p>The product codes.</p>
+     * @public
+     */
+    ProductCodes?: ProductCode[] | undefined;
+    /**
+     * <p>The RAM disk ID.</p>
+     * @public
+     */
+    RamdiskId?: AttributeValue | undefined;
+    /**
+     * <p>The device name of the root device volume (for example,
+     *             <code>/dev/sda1</code>).</p>
+     * @public
+     */
+    RootDeviceName?: AttributeValue | undefined;
+    /**
+     * <p>Indicates whether source/destination checks are enabled.</p>
+     * @public
+     */
+    SourceDestCheck?: AttributeBooleanValue | undefined;
+    /**
+     * <p>Indicates whether enhanced networking with the Intel 82599 Virtual Function interface
+     *             is enabled.</p>
+     * @public
+     */
+    SriovNetSupport?: AttributeValue | undefined;
+    /**
+     * <p>The user data.</p>
+     * @public
+     */
+    UserData?: AttributeValue | undefined;
+    /**
+     * <p>Indicates whether stop protection is enabled for the instance.</p>
+     * @public
+     */
+    DisableApiStop?: AttributeBooleanValue | undefined;
+    /**
+     * <p>The security groups associated with the instance.</p>
+     * @public
+     */
+    Groups?: GroupIdentifier[] | undefined;
+}
+/**
+ * @public
+ */
+export interface DescribeInstanceConnectEndpointsRequest {
+    /**
+     * <p>Checks whether you have the required permissions for the action, without actually making the request,
+     *             and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *             Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     * @public
+     */
+    DryRun?: boolean | undefined;
+    /**
+     * <p>The maximum number of items to return for this request.
+     *          To get the next page of items, make another request with the token returned in the output.
+     * 	        For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Query-Requests.html#api-pagination">Pagination</a>.</p>
+     * @public
+     */
+    MaxResults?: number | undefined;
+    /**
+     * <p>The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+    /**
+     * <p>One or more filters.</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>instance-connect-endpoint-id</code> - The ID of the EC2 Instance Connect Endpoint.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>state</code> - The state of the EC2 Instance Connect Endpoint (<code>create-in-progress</code> | <code>create-complete</code> | <code>create-failed</code> |
+     *                     <code>delete-in-progress</code> | <code>delete-complete</code> | <code>delete-failed</code>).</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>subnet-id</code> - The ID of the subnet in which the EC2 Instance
+     *                     Connect Endpoint was created.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>tag</code>:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value.
+     *     For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>tag-key</code> - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>tag-value</code> - The value of a tag assigned to the resource. Use this filter to find all resources
+     *                     that have a tag with a specific value, regardless of tag key.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>vpc-id</code> - The ID of the VPC in which the EC2 Instance Connect
+     *                     Endpoint was created.</p>
+     *             </li>
+     *          </ul>
+     * @public
+     */
+    Filters?: Filter[] | undefined;
+    /**
+     * <p>One or more EC2 Instance Connect Endpoint IDs.</p>
+     * @public
+     */
+    InstanceConnectEndpointIds?: string[] | undefined;
+}
+/**
+ * @public
+ */
+export interface DescribeInstanceConnectEndpointsResult {
+    /**
+     * <p>Information about the EC2 Instance Connect Endpoints.</p>
+     * @public
+     */
+    InstanceConnectEndpoints?: Ec2InstanceConnectEndpoint[] | undefined;
+    /**
+     * <p>The token to include in another request to get the next page of items. This value is <code>null</code> when there
+     *          are no more items to return.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+}
 /**
  * @public
  */
@@ -1652,7 +1922,9 @@ export interface ConnectionTrackingSpecificationResponse {
     /**
      * <p>Timeout (in seconds) for idle TCP
      * 						connections in an established state. Min: 60 seconds. Max: 432000 seconds (5
-     * 						days). Default: 432000 seconds. Recommended: Less than 432000 seconds.</p>
+     * 						days). Default: 350 seconds for Nitro v6 instance types (excluding
+     * 						P6e-GB200); 432000 seconds for all other instance types (including
+     * 						P6e-GB200). Recommended: Less than 432000 seconds.</p>
      * @public
      */
     TcpEstablishedTimeout?: number | undefined;
@@ -12931,373 +13203,3 @@ export interface DescribeStaleSecurityGroupsRequest {
      */
     VpcId: string | undefined;
 }
-/**
- * <p>Describes a stale rule in a security group.</p>
- * @public
- */
-export interface StaleIpPermission {
-    /**
-     * <p>If the protocol is TCP or UDP, this is the start of the port range.
-     *           If the protocol is ICMP or ICMPv6, this is the ICMP type or -1 (all ICMP types).</p>
-     * @public
-     */
-    FromPort?: number | undefined;
-    /**
-     * <p>The IP protocol name (<code>tcp</code>, <code>udp</code>, <code>icmp</code>, <code>icmpv6</code>) or number
-     *           (see <a href="http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml">Protocol Numbers)</a>.</p>
-     * @public
-     */
-    IpProtocol?: string | undefined;
-    /**
-     * <p>The IP ranges. Not applicable for stale security group rules.</p>
-     * @public
-     */
-    IpRanges?: string[] | undefined;
-    /**
-     * <p>The prefix list IDs. Not applicable for stale security group rules.</p>
-     * @public
-     */
-    PrefixListIds?: string[] | undefined;
-    /**
-     * <p>If the protocol is TCP or UDP, this is the end of the port range.
-     *           If the protocol is ICMP or ICMPv6, this is the ICMP code or -1 (all ICMP codes).</p>
-     * @public
-     */
-    ToPort?: number | undefined;
-    /**
-     * <p>The security group pairs. Returns the ID of the referenced security group and VPC, and the ID and status of the VPC peering connection.</p>
-     * @public
-     */
-    UserIdGroupPairs?: UserIdGroupPair[] | undefined;
-}
-/**
- * <p>Describes a stale security group (a security group that contains stale rules).</p>
- * @public
- */
-export interface StaleSecurityGroup {
-    /**
-     * <p>The description of the security group.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>The ID of the security group.</p>
-     * @public
-     */
-    GroupId?: string | undefined;
-    /**
-     * <p>The name of the security group.</p>
-     * @public
-     */
-    GroupName?: string | undefined;
-    /**
-     * <p>Information about the stale inbound rules in the security group.</p>
-     * @public
-     */
-    StaleIpPermissions?: StaleIpPermission[] | undefined;
-    /**
-     * <p>Information about the stale outbound rules in the security group.</p>
-     * @public
-     */
-    StaleIpPermissionsEgress?: StaleIpPermission[] | undefined;
-    /**
-     * <p>The ID of the VPC for the security group.</p>
-     * @public
-     */
-    VpcId?: string | undefined;
-}
-/**
- * @public
- */
-export interface DescribeStaleSecurityGroupsResult {
-    /**
-     * <p>The token to include in another request to get the next page of items. This value is <code>null</code> when there are no more items to return.</p>
-     * @public
-     */
-    NextToken?: string | undefined;
-    /**
-     * <p>Information about the stale security groups.</p>
-     * @public
-     */
-    StaleSecurityGroupSet?: StaleSecurityGroup[] | undefined;
-}
-/**
- * @public
- */
-export interface DescribeStoreImageTasksRequest {
-    /**
-     * <p>The AMI IDs for which to show progress. Up to 20 AMI IDs can be included in a
-     *       request.</p>
-     * @public
-     */
-    ImageIds?: string[] | undefined;
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     * 			and provides an error response. If you have the required permissions, the error response is
-     * 			<code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     * @public
-     */
-    DryRun?: boolean | undefined;
-    /**
-     * <p>The filters.</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>task-state</code> - Returns tasks in a certain state (<code>InProgress</code> |
-     *           <code>Completed</code> | <code>Failed</code>)</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>bucket</code> - Returns task information for tasks that targeted a specific
-     *           bucket. For the filter value, specify the bucket name.</p>
-     *             </li>
-     *          </ul>
-     *          <note>
-     *             <p>When you specify the <code>ImageIds</code> parameter, any filters that you specify are
-     *         ignored. To use the filters, you must remove the <code>ImageIds</code> parameter.</p>
-     *          </note>
-     * @public
-     */
-    Filters?: Filter[] | undefined;
-    /**
-     * <p>The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.</p>
-     * @public
-     */
-    NextToken?: string | undefined;
-    /**
-     * <p>The maximum number of items to return for this request.
-     *          To get the next page of items, make another request with the token returned in the output.
-     * 	        For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Query-Requests.html#api-pagination">Pagination</a>.</p>
-     *          <p>You cannot specify this parameter and the <code>ImageIds</code> parameter in the same
-     *       call.</p>
-     * @public
-     */
-    MaxResults?: number | undefined;
-}
-/**
- * <p>The information about the AMI store task, including the progress of the task.</p>
- * @public
- */
-export interface StoreImageTaskResult {
-    /**
-     * <p>The ID of the AMI that is being stored.</p>
-     * @public
-     */
-    AmiId?: string | undefined;
-    /**
-     * <p>The time the task started.</p>
-     * @public
-     */
-    TaskStartTime?: Date | undefined;
-    /**
-     * <p>The name of the Amazon S3 bucket that contains the stored AMI object.</p>
-     * @public
-     */
-    Bucket?: string | undefined;
-    /**
-     * <p>The name of the stored AMI object in the bucket.</p>
-     * @public
-     */
-    S3objectKey?: string | undefined;
-    /**
-     * <p>The progress of the task as a percentage.</p>
-     * @public
-     */
-    ProgressPercentage?: number | undefined;
-    /**
-     * <p>The state of the store task (<code>InProgress</code>, <code>Completed</code>, or
-     *       <code>Failed</code>).</p>
-     * @public
-     */
-    StoreTaskState?: string | undefined;
-    /**
-     * <p>If the tasks fails, the reason for the failure is returned. If the task succeeds,
-     *       <code>null</code> is returned.</p>
-     * @public
-     */
-    StoreTaskFailureReason?: string | undefined;
-}
-/**
- * @public
- */
-export interface DescribeStoreImageTasksResult {
-    /**
-     * <p>The information about the AMI store tasks.</p>
-     * @public
-     */
-    StoreImageTaskResults?: StoreImageTaskResult[] | undefined;
-    /**
-     * <p>The token to include in another request to get the next page of items. This value is <code>null</code> when there
-     *          are no more items to return.</p>
-     * @public
-     */
-    NextToken?: string | undefined;
-}
-/**
- * @public
- */
-export interface DescribeSubnetsRequest {
-    /**
-     * <p>The filters.</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>availability-zone</code> - The Availability Zone for the subnet. You can also use
-     *                     <code>availabilityZone</code> as the filter name.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>availability-zone-id</code> - The ID of the Availability Zone for the subnet.
-     *                     You can also use <code>availabilityZoneId</code> as the filter name.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>available-ip-address-count</code> - The number of IPv4 addresses in the
-     *                     subnet that are available.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>cidr-block</code> - The IPv4 CIDR block of the subnet. The CIDR block
-     *                     you specify must exactly match the subnet's CIDR block for information to be
-     *                     returned for the subnet. You can also use <code>cidr</code> or
-     *                         <code>cidrBlock</code> as the filter names.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>customer-owned-ipv4-pool</code> - The customer-owned IPv4 address pool
-     *                     associated with the subnet.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>default-for-az</code> - Indicates whether this is the default subnet for
-     *                     the Availability Zone (<code>true</code> | <code>false</code>). You can also use
-     *                         <code>defaultForAz</code> as the filter name.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>enable-dns64</code> - Indicates whether DNS queries made to the
-     *                     Amazon-provided DNS Resolver in this subnet should return synthetic IPv6
-     *                     addresses for IPv4-only destinations.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>enable-lni-at-device-index</code> - Indicates the device position for
-     *                     local network interfaces in this subnet. For example, <code>1</code> indicates
-     *                     local network interfaces in this subnet are the secondary network interface
-     *                     (eth1). </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>ipv6-cidr-block-association.ipv6-cidr-block</code> - An IPv6 CIDR
-     *                     block associated with the subnet.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>ipv6-cidr-block-association.association-id</code> - An association ID
-     *                     for an IPv6 CIDR block associated with the subnet.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>ipv6-cidr-block-association.state</code> - The state of an IPv6 CIDR
-     *                     block associated with the subnet.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>ipv6-native</code> - Indicates whether this is an IPv6 only subnet
-     *                         (<code>true</code> | <code>false</code>).</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>map-customer-owned-ip-on-launch</code> - Indicates whether a network
-     *                     interface created in this subnet (including a network interface created by <a>RunInstances</a>) receives a customer-owned IPv4 address.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>map-public-ip-on-launch</code> - Indicates whether instances launched in
-     *                     this subnet receive a public IPv4 address.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>outpost-arn</code> - The Amazon Resource Name (ARN) of the Outpost.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>owner-id</code> - The ID of the Amazon Web Services account that owns the
-     *                     subnet.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>private-dns-name-options-on-launch.hostname-type</code> - The type of
-     *                     hostname to assign to instances in the subnet at launch. For IPv4-only and
-     *                     dual-stack (IPv4 and IPv6) subnets, an instance DNS name can be based on the
-     *                     instance IPv4 address (ip-name) or the instance ID (resource-name). For IPv6
-     *                     only subnets, an instance DNS name must be based on the instance ID
-     *                     (resource-name).</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>private-dns-name-options-on-launch.enable-resource-name-dns-a-record</code>
-     *                     - Indicates whether to respond to DNS queries for instance hostnames with DNS A
-     *                     records.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>private-dns-name-options-on-launch.enable-resource-name-dns-aaaa-record</code>
-     *                     - Indicates whether to respond to DNS queries for instance hostnames with DNS
-     *                     AAAA records.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>state</code> - The state of the subnet (<code>pending</code> | <code>available</code>).</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>subnet-arn</code> - The Amazon Resource Name (ARN) of the subnet.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>subnet-id</code> - The ID of the subnet.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>tag</code> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value.
-     *     For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>tag-key</code> - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>vpc-id</code> - The ID of the VPC for the subnet.</p>
-     *             </li>
-     *          </ul>
-     * @public
-     */
-    Filters?: Filter[] | undefined;
-    /**
-     * <p>The IDs of the subnets.</p>
-     *          <p>Default: Describes all your subnets.</p>
-     * @public
-     */
-    SubnetIds?: string[] | undefined;
-    /**
-     * <p>The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.</p>
-     * @public
-     */
-    NextToken?: string | undefined;
-    /**
-     * <p>The maximum number of items to return for this request.
-     * 	To get the next page of items, make another request with the token returned in the output.
-     * 	For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Query-Requests.html#api-pagination">Pagination</a>.</p>
-     * @public
-     */
-    MaxResults?: number | undefined;
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     * @public
-     */
-    DryRun?: boolean | undefined;
-}