@ccoalm/ccl-skills 0.3.0 → 0.5.0

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/mutation_probe.sh

@@ -0,0 +1,100 @@
+#!/usr/bin/env bash
+# 差分敏感度实测：逐谓词把其 code 字面量替换掉使其在结果中消失，
+# 确认自测套件转红。绿的谓词 = 该谓词没有覆盖。
+#
+# 为什么必须"施加"而不是"断言"：本目录实测踩过两种无效突变——
+#   ① 改的是 add() 的 severity 参数，而断言比较 code 集合，
+#      改了 oracle 不观测的维度，全绿是假通过；
+#   ② 脚本崩溃时也没有 FAIL 行，只看 FAIL 行会把崩溃读成绿。
+# 所以判据同时看退出码与 FAIL 行。
+set -uo pipefail
+here="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd -P)"
+work="$(mktemp -d)"; trap 'rm -rf "${work}"' EXIT
+cp -R "${here}" "${work}/scripts"
+cd "${work}/scripts" || exit 1
+
+bash test_figure_and_doc_lint.sh >/dev/null 2>&1 || {
+  echo "BASELINE-RED: 未突变时套件就是红的，实验无效"; exit 1; }
+echo "baseline: GREEN"
+
+# 谓词清单从**源码派生**，不手写：手写清单会漏掉新增谓词，
+# 而漏掉的那条就没有任何覆盖。独立评审实测抓到过——手写的 24 条里
+# 漏了 PARSE / C4-VIEWBOX / C4-EDGE-VAGUE 三条。
+extract_codes() {  # <linter-file>
+  # 必须覆盖**所有发射路径与所有档位**。踩过两次分母偏小：
+  #   ① 早先只认 add(...) 与错误元组，漏掉走 findings.append({'code': ...}) 的
+  #      CONTRACT-MISSING / CONTRACT-INVALID；
+  #   ② 档位只写了 ERROR|WARN，于是把一条谓词改成 INFO 就让它**静默退出分母**，
+  #      总数看起来不变、覆盖却少了一条。档位一律用 [A-Z]+ 匹配，不枚举。
+  python3 - "$1" <<'PYEOF'
+import re, sys
+src = open(sys.argv[1], encoding="utf8").read()
+pats = [
+    r"""add\(\s*['"][A-Z]+['"]\s*,\s*['"]([A-Z0-9][A-Z0-9-]*)['"]""",   # add('<档位>', 'CODE'
+    r"""\(\s*['"][A-Z]+['"]\s*,\s*['"]([A-Z0-9][A-Z0-9-]*)['"]""",      # ('<档位>', 'CODE'
+    r"""['"]code['"]\s*:\s*['"]([A-Z0-9][A-Z0-9-]*)['"]""",                    # {'code': 'CODE'
+]
+codes = set()
+for pat in pats:
+    codes |= set(re.findall(pat, src))
+codes.discard("MUTANT-GONE")
+for c in sorted(codes):
+    print(c)
+PYEOF
+}
+codes_fig="$(extract_codes figure-lint.py)"
+codes_doc="$(extract_codes doc-lint.py)"
+echo "codes_from_source: figure=$(echo "${codes_fig}" | wc -w | tr -d ' ') doc=$(echo "${codes_doc}" | wc -w | tr -d ' ')"
+
+pass=0; total=0; missed=""
+probe() {
+  local file="$1" code="$2"
+  total=$((total + 1))
+  cp "${file}" "${file}.bak"
+  MUT_FILE="${file}" MUT_CODE="${code}" python3 -c '
+import os
+p = os.environ["MUT_FILE"]
+s = open(p, encoding="utf8").read()
+open(p, "w").write(s.replace("'"'"'" + os.environ["MUT_CODE"] + "'"'"'", "'"'"'MUTANT-GONE'"'"'"))
+'
+  local out rc
+  out="$(bash test_figure_and_doc_lint.sh 2>&1)"; rc=$?
+  mv "${file}.bak" "${file}"
+  if [ "${rc}" -ne 0 ] && printf '%s' "${out}" | grep -q FAIL; then
+    pass=$((pass + 1)); printf '  %-28s RED  ok\n' "${code}"
+  else
+    missed="${missed} ${code}"; printf '  %-28s GREEN  NO-COVERAGE\n' "${code}"
+  fi
+}
+for c in ${codes_fig}; do probe figure-lint.py "${c}"; done
+for c in ${codes_doc}; do probe doc-lint.py "${c}"; done
+# 派生集合必须覆盖 linter 在自测语料上实际输出过的每一个 code。
+# 不断言的话，一条新增谓词只要用了未被派生正则识别的发射路径，就会静默无覆盖。
+emitted="$(
+  { python3 figure-lint.py tests/svg/*.svg --json 2>/dev/null || true
+    python3 doc-lint.py tests/doc/*.md --json 2>/dev/null || true
+  } | python3 -c '
+import json, sys
+codes = set()
+for chunk in sys.stdin.read().split("\n{"):
+    text = chunk if chunk.startswith("{") else "{" + chunk
+    try:
+        d = json.loads(text)
+    except Exception:
+        continue
+    for v in d.get("files", d).values():   # doc-lint 的 JSON 顶层就是文件映射，没有 files 键
+        codes |= {x["code"] for x in v["findings"]}
+print(" ".join(sorted(codes)))
+')"
+# codes_* 是换行分隔的，必须先规范成单空格分隔再做包含匹配，
+# 否则 case 模式永远匹配不上、把每一条都误报成缺口（本脚本实测踩过）。
+derived=" $(printf '%s %s' "${codes_fig}" "${codes_doc}" | tr '\n' ' ' | tr -s ' ') "
+for c in ${emitted}; do
+  case "${derived}" in
+    *" ${c} "*) ;;
+    *) echo "DERIVATION-GAP: ${c} 实际会被输出，却不在派生清单里——该谓词无突变覆盖"; missed="${missed} ${c}";;
+  esac
+done
+echo "differential_sensitivity=${pass}/${total}"
+[ -n "${missed}" ] && { echo "uncovered:${missed}"; exit 1; }
+echo "mutation_probe_ok"

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/test_figure_and_doc_lint.sh

@@ -0,0 +1,375 @@
+#!/usr/bin/env bash
+# 逐谓词差分自测：每个 fixture 只应触发它自己的那一条，控制组必须干净。
+#
+# 这是 references/figure-and-table-craft.md §8 第 1、2 条的机械化：
+#   1) 先证明检查器能报失败再信它的绿；
+#   2) 改判据必须同步改 fixture——本测试就是"fixture 失效但仍通过"的防线。
+#
+# 已踩过的坑，改本文件前先读：
+#   - CJK 标点紧跟 $var 会被 bash 吞进变量名（踩过两次）——插值一律用 ${var}。
+#   - 改函数签名必须同步改调用点：曾把 ext 参数加进签名却漏改调用点，
+#     第一条期望（控制组）被当成 ext 吃掉，control.svg 变脏仍全绿。
+#     现在参数不足会直接判红，且期望表是**全量对应**：报告里多一个或少一个文件都判红，
+#     所以意外文件（如通配到 figure-contract.json）不会再被无声忽略。
+set -uo pipefail
+
+here="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd -P)"
+fail=0
+
+note() { printf '%s\n' "$*"; }
+bad()  { printf 'FAIL %s\n' "$*"; fail=1; }
+
+# run_expect <linter> <fixture-dir> <ext> <expectation>...
+#   expectation 形如 "file=CODE[,CODE]"；等号后为空表示该 fixture 必须干净。
+run_expect() {
+  if [ "$#" -lt 4 ]; then
+    bad "run_expect 参数不足（需 linter dir ext expectation...），实得 $# 个"; return
+  fi
+  local linter="$1" dir="$2" ext="$3"; shift 3
+  local json
+  # 两个 linter 在有发现时都返回非 0（json 模式亦然），所以不能用退出码判执行失败；
+  # 判据是"输出能否解析成 JSON"。
+  json="$(python3 "${here}/${linter}" "${dir}"/*."${ext}" --json 2>/dev/null)"
+  printf '%s' "${json}" | python3 -c 'import json,sys; json.load(sys.stdin)' 2>/dev/null || {
+    bad "${linter} 未产出可解析 JSON（${dir}）"; return; }
+
+  local result
+  result="$(printf '%s' "${json}" | LINT_EXPECT="$*" python3 -c '
+import json, sys, os
+d = json.load(sys.stdin)
+files = d.get("files", d)
+actual = {os.path.basename(k): sorted({x["code"] for x in v["findings"]}) for k, v in files.items()}
+want = {}
+for spec in os.environ["LINT_EXPECT"].split():
+    name, _, codes = spec.partition("=")
+    want[name] = sorted(c for c in codes.split(",") if c)
+problems = []
+for name in sorted(set(want) - set(actual)):
+    problems.append("期望表列了但报告里没有: " + name)
+for name in sorted(set(actual) - set(want)):
+    problems.append("报告里出现但期望表未列（发现=%s）: %s" % (actual[name] or [], name))
+for name in sorted(set(want) & set(actual)):
+    if want[name] != actual[name]:
+        problems.append("%s 期望 %s 实得 %s" % (name, want[name] or [], actual[name] or []))
+print("\n".join(problems))
+')" || { bad "${linter} 结果比对失败"; return; }
+  if [ -n "${result}" ]; then
+    while IFS= read -r line; do
+      [ -n "${line}" ] && bad "${linter}: ${line}"
+    done <<<"${result}"
+  fi
+}
+
+note "== figure-lint 逐谓词差分 =="
+run_expect figure-lint.py "${here}/tests/svg" svg \
+  'control.svg=' \
+  'no-title.svg=C4-TITLE' \
+  'no-legend.svg=C4-LEGEND' \
+  'low-contrast.svg=WCAG-143' \
+  'overflow.svg=SVG-OVERFLOW' \
+  'no-group.svg=GROUPING' \
+  'ungrouped-card.svg=GROUPING' \
+  'unlabeled-edge.svg=C4-EDGE-LABEL' \
+  'offcontract-shape.svg=CONTRACT-COLOR-TOKEN' \
+  'malformed.svg=PARSE' \
+  'bad-viewbox.svg=GEOMETRY' \
+  'no-viewbox.svg=C4-VIEWBOX' \
+  'edge-no-arrow.svg=C4-EDGE-DIRECTION' \
+  'edge-vague.svg=C4-EDGE-VAGUE' \
+  'transformed.svg=CONTRAST-UNSUPPORTED' \
+  'crossings.svg=GRAPH-CROSSINGS' \
+  'figure-is-a-list.svg=FIGURE-IS-A-LIST,GROUPING' \
+  'flow-mixed.svg=FLOW-DIRECTION-MIXED' \
+  'no-aria.svg=FIGURE-A11Y-STRUCTURE' \
+  'cvd-confusable.svg=' \
+  'decorative-line.svg=' \
+  'blackmarker.svg=CONTRACT-COLOR-TOKEN'
+
+note "== doc-lint 逐谓词差分 =="
+run_expect doc-lint.py "${here}/tests/doc" md \
+  'control.md=' \
+  'tables-only-clean.md=' \
+  'fake-header.md=WCAG-131-FAKE-HEADING' \
+  'no-unit.md=TABLE-NO-UNIT' \
+  'should-be-chart.md=ICD203-9-SHOULD-BE-CHART' \
+  'imbalance.md=CARRIER-IMBALANCE,ICD203-9-SHOULD-BE-CHART' \
+  'fig-dangling.md=FIG-REF-DANGLING' \
+  'fig-orphan.md=FIG-ORPHAN' \
+  'fig-orphan-captioned.md=FIG-ORPHAN' \
+  'empty-header.md=WCAG-131-TABLE' \
+  'wide-table.md=TABLE-WIDE' \
+  'unfilled.md=TABLE-UNFILLED' \
+  'fenced-noise.md='
+
+# 无契约时应提示「重复出现的值该成为 token」——独立目录，避免污染契约测试
+t3="$(mktemp -d)"
+# 需要一张「多种颜色各重复多次」的图才触发；就地合成，不入仓
+python3 - "${t3}/multi.svg" <<'SVGEOF'
+import sys
+cols = ["#0072B2", "#D55E00", "#009E73", "#CC79A7", "#E69F00"]
+parts = ['<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 400 200" role="img" aria-label="many repeated colours"><title>many repeated colours</title><g>']
+y = 5
+for c in cols:
+    for _ in range(3):
+        parts.append(f'<rect x="10" y="{y}" width="12" height="8" fill="{c}"/>')
+        y += 10
+parts.append("</g></svg>")
+open(sys.argv[1], "w").write("".join(parts))
+SVGEOF
+out2="$(python3 "${here}/figure-lint.py" "${t3}"/*.svg 2>/dev/null)"; rc2=$?
+case "${out2}" in *VALUE-SHOULD-BE-TOKEN*) ;; *) bad "无契约且多色重复时未报 VALUE-SHOULD-BE-TOKEN";; esac
+[ "${rc2}" = 1 ] || bad "多色重复用例退出码应为 1(CONTRACT-MISSING 是 ERROR)，实得 ${rc2}"
+# 规则写的是「>2 次即应成 token」——单一颜色重复 3 次同样要报，否则规则与实现不一致
+python3 - "${t3}/one.svg" <<'SVGEOF2'
+import sys
+parts = ['<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 400 200" role="img" aria-label="one repeated colour"><title>one repeated colour</title><g>']
+y = 5
+for _ in range(3):
+    parts.append(f'<rect x="10" y="{y}" width="12" height="8" fill="#0072B2"/>')
+    y += 10
+parts.append("</g></svg>")
+open(sys.argv[1], "w").write("".join(parts))
+SVGEOF2
+out2b="$(python3 "${here}/figure-lint.py" "${t3}/one.svg" 2>/dev/null)"; rc2b=$?
+case "${out2b}" in *VALUE-SHOULD-BE-TOKEN*) ;; *) bad "单色重复 3 次未报 VALUE-SHOULD-BE-TOKEN（规则与实现不一致）";; esac
+[ "${rc2b}" = 1 ] || bad "单色重复用例退出码应为 1(CONTRACT-MISSING 是 ERROR)，实得 ${rc2b}"
+rm -rf "${t3}"
+
+# CVD 距离只在契约**显式声明语义色**时测量，且只报数不下判定
+t3b="$(mktemp -d)"
+cp "${here}/tests/svg/cvd-confusable.svg" "${t3b}/"
+cat >"${t3b}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [14],
+  "color_tokens": {"ink":"#111827","warn":"#B54708","crit":"#B42318","ok":"#009E73","surface":"#FFFFFF"},
+  "semantic_colors": {"warning":"#B54708","critical":"#B42318","ok":"#009E73"} }
+JSON
+out3b="$(python3 "${here}/figure-lint.py" "${t3b}/cvd-confusable.svg" 2>/dev/null)"; rc3b=$?
+case "${out3b}" in *CVD-DISTANCE*) ;; *) bad "契约声明语义色后未测量 CVD-DISTANCE";; esac
+case "${out3b}" in *"测量值不是判定"*) ;; *) bad "CVD-DISTANCE 文案未声明这是测量值";; esac
+# 「只报数不设阈」若让退出码变成非零，这句声明就被退出码当场推翻——必须是 INFO 档、退出码 0
+[ "${rc3b}" = 0 ] || bad "只有 CVD-DISTANCE 测量时退出码应为 0(INFO 不阻断)，实得 ${rc3b}"
+case "${out3b}" in *INFO*) ;; *) bad "CVD-DISTANCE 未标为 INFO 档";; esac
+# semantic_colors 非法必须报 CONTRACT-INVALID，不得崩溃、也不得静默丢成空集
+for bad_sc in '["#B54708","#B42318"]' '"#B54708"' '{"a":"red","b":"#B42318"}' '{"a":"#123456","b":"#B42318"}'; do
+  cat >"${t3b}/figure-contract.json" <<JSON
+{ "canvas_ratios": [2.0], "font_scale": [14],
+  "color_tokens": {"ink":"#111827","warn":"#B54708","crit":"#B42318","ok":"#009E73","surface":"#FFFFFF"},
+  "semantic_colors": ${bad_sc} }
+JSON
+  o="$(python3 "${here}/figure-lint.py" "${t3b}/cvd-confusable.svg" 2>&1)"; r=$?
+  case "${o}" in *CONTRACT-INVALID*) ;; *) bad "非法 semantic_colors ${bad_sc} 未报 CONTRACT-INVALID";; esac
+  case "${o}" in *Traceback*) bad "非法 semantic_colors ${bad_sc} 让检查器崩溃";; esac
+  [ "${r}" = 1 ] || bad "非法 semantic_colors ${bad_sc} 应为 ERROR(退出码 1)，实得 ${r}"
+done
+# 未声明语义色时不得凭渲染色臆断语义
+out3c="$(python3 "${here}/figure-lint.py" "${here}/tests/svg/cvd-confusable.svg" 2>/dev/null || true)"
+case "${out3c}" in *CVD-*) bad "契约未声明语义色却报了 CVD-*（把装饰色当语义色）";; esac
+rm -rf "${t3b}"
+
+# 主题维度：同一套写死的色在另一主题底上会失效；纯黑底另有提示。
+t4="$(mktemp -d)"
+cp "${here}/tests/svg/control.svg" "${t4}/"
+cat >"${t4}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [13,14],
+  "color_tokens": {"ink":"#111827","primary":"#0072B2","critical":"#D55E00","ok":"#009E73","surface":"#FFFFFF"},
+  "themes": { "light": {"surface":"#FFFFFF"}, "dark": {"surface":"#000000"} } }
+JSON
+out4="$(python3 "${here}/figure-lint.py" "${t4}"/control.svg 2>/dev/null)"; rc4=$?
+[ "${rc4}" = 2 ] || bad "主题用例退出码应为 2(仅 WARN)，实得 ${rc4}"
+case "${out4}" in *THEME-CONTRAST*) ;; *) bad "深色主题下未报 THEME-CONTRAST";; esac
+case "${out4}" in *THEME-PURE-BLACK*) ;; *) bad "纯黑主题底未报 THEME-PURE-BLACK";; esac
+# 主题底色不是合法 #RRGGBB 时必须报契约非法——否则该主题被静默跳过 = 假绿
+cat >"${t4}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [13,14],
+  "color_tokens": {"ink":"#111827","primary":"#0072B2","critical":"#D55E00","ok":"#009E73","surface":"#FFFFFF"},
+  "themes": { "light": {"surface":"#FFFFFF"}, "dark": {"surface":"black"} } }
+JSON
+out4b="$(python3 "${here}/figure-lint.py" "${t4}"/control.svg 2>/dev/null)"; rc4b=$?
+case "${out4b}" in *CONTRACT-INVALID*) ;; *) bad "themes.dark.surface 非十六进制未报 CONTRACT-INVALID（静默跳过=假绿）";; esac
+[ "${rc4b}" = 1 ] || bad "契约非法应为 ERROR(退出码 1)，实得 ${rc4b}"
+cat >"${t4}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [13,14],
+  "color_tokens": {"ink":"#111827","primary":"#0072B2","critical":"#D55E00","ok":"#009E73","surface":"#FFFFFF"},
+  "themes": { "light": {"surface":"#FFFFFF"}, "dark": {"surface":[255]} } }
+JSON
+out4c="$(python3 "${here}/figure-lint.py" "${t4}"/control.svg 2>/dev/null || true)"
+case "${out4c}" in *CONTRACT-INVALID*) ;; *) bad "themes.dark.surface 非字符串未报 CONTRACT-INVALID";; esac
+
+# 底色解析不可信时，主题对比度不得凭全局底色判——必须显式报未判定
+t4u="$(mktemp -d)"
+cp "${here}/tests/svg/transformed.svg" "${t4u}/"
+cat >"${t4u}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [13,14],
+  "color_tokens": {"ink":"#111827","primary":"#0072B2","surface":"#FFFFFF"},
+  "themes": { "light": {"surface":"#FFFFFF"}, "dark": {"surface":"#0B0F19"} } }
+JSON
+out4u="$(python3 "${here}/figure-lint.py" "${t4u}/transformed.svg" 2>/dev/null || true)"
+case "${out4u}" in *THEME-UNASSESSED*) ;; *) bad "几何不可信时未报 THEME-UNASSESSED";; esac
+case "${out4u}" in *THEME-CONTRAST*) bad "几何不可信时仍判 THEME-CONTRAST（拿不可信底色判出的假红）";; esac
+rm -rf "${t4u}"
+
+# fill="none" 的描边框不是底板：包住低对比文字的边框不得豁免 THEME-CONTRAST
+t4s="$(mktemp -d)"
+cat >"${t4s}/stroked.svg" <<'SVG'
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 400 200" role="img" aria-label="stroked box"><title>stroked box</title><g>
+<rect x="0" y="0" width="400" height="200" fill="#FFFFFF"/>
+<rect x="20" y="20" width="200" height="60" fill="none" stroke="#0072B2"/>
+<text x="30" y="55" font-size="14" fill="#111827">深色小字</text>
+</g></svg>
+SVG
+cat >"${t4s}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [14],
+  "color_tokens": {"ink":"#111827","primary":"#0072B2","surface":"#FFFFFF"},
+  "themes": { "light": {"surface":"#FFFFFF"}, "dark": {"surface":"#0B0F19"} } }
+JSON
+out4s="$(python3 "${here}/figure-lint.py" "${t4s}/stroked.svg" 2>/dev/null || true)"
+case "${out4s}" in *THEME-CONTRAST*) ;; *) bad "fill=none 的描边框被当成底板，豁免了 THEME-CONTRAST";; esac
+rm -rf "${t4s}"
+
+# 两端都没箭头的无向连接不得按 d 的书写顺序造出方向
+t5="$(mktemp -d)"
+cat >"${t5}/undirected.svg" <<'SVG'
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 400 200" role="img" aria-label="undirected"><title>undirected</title>
+<defs><marker id="a" refX="10" refY="6"><path d="M1 1L11 6L1 11Z" fill="#0072B2"/></marker></defs><g>
+<rect x="0" y="0" width="400" height="200" fill="#FFFFFF"/>
+<path d="M10 20L200 20" fill="none" stroke="#0072B2"/>
+<path d="M200 60L10 60" fill="none" stroke="#0072B2"/>
+<path d="M10 100L200 100" fill="none" stroke="#0072B2"/>
+<path d="M200 140L10 140" fill="none" stroke="#0072B2"/>
+</g></svg>
+SVG
+out5="$(python3 "${here}/figure-lint.py" "${t5}/undirected.svg" 2>/dev/null || true)"
+case "${out5}" in *FLOW-DIRECTION-MIXED*) bad "无箭头的连接被按 d 书写顺序判成混合流向";; esac
+rm -rf "${t5}"
+
+# 主题相符时不得误报
+cat >"${t4}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [13,14],
+  "color_tokens": {"ink":"#111827","primary":"#0072B2","critical":"#D55E00","ok":"#009E73","surface":"#FFFFFF"},
+  "themes": { "light": {"surface":"#FFFFFF"} } }
+JSON
+out5="$(python3 "${here}/figure-lint.py" "${t4}"/control.svg 2>/dev/null || true)"
+case "${out5}" in *THEME-CONTRAST*) bad "单一浅色主题下误报 THEME-CONTRAST";; esac
+rm -rf "${t4}"
+
+# ---- 契约符合性：缺失 / 相符 / 不符 / 损坏 / 多目录 ----
+note "== figure-lint 契约符合性 =="
+tmp="$(mktemp -d)"; t2="$(mktemp -d)"
+trap 'rm -rf "${tmp}" "${t2}"' EXIT
+cp "${here}/tests/svg/control.svg" "${tmp}/"
+
+out="$(python3 "${here}/figure-lint.py" "${tmp}" 2>/dev/null || true)"
+case "${out}" in *CONTRACT-MISSING*) ;; *) bad "契约缺失时未报 CONTRACT-MISSING";; esac
+
+
+# 相符：取 control.svg 的真实取值，必须干净（写负例前先核对 fixture 真值，
+# 否则会写出一份"其实相符"的契约让断言永远绿——本轮实际踩过）。
+cat >"${tmp}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [13, 14],
+  "color_tokens": { "ink": "#111827", "primary": "#0072B2", "critical": "#D55E00",
+                    "ok": "#009E73", "surface": "#FFFFFF" } }
+JSON
+out="$(python3 "${here}/figure-lint.py" "${tmp}" 2>/dev/null || true)"
+case "${out}" in *CONTRACT-MISSING*) bad "契约存在时仍报 CONTRACT-MISSING";; esac
+case "${out}" in
+  *CONTRACT-RATIO*|*CONTRACT-FONT-SCALE*|*CONTRACT-COLOR-TOKEN*)
+    bad "契约与 fixture 相符却报了偏离（假阳性）";;
+esac
+
+# 不符：三维各自断言。写成 OR（三选一命中即过）会让其余两维永久失去覆盖——
+# 突变实测过：删掉 CONTRACT-RATIO 后套件仍绿，因为 FONT-SCALE 顶上了。
+cat >"${tmp}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [1.778], "font_scale": [99], "color_tokens": { "ink": "#000000" } }
+JSON
+out="$(python3 "${here}/figure-lint.py" "${tmp}" 2>/dev/null || true)"
+for want in CONTRACT-RATIO CONTRACT-FONT-SCALE CONTRACT-COLOR-TOKEN; do
+  case "${out}" in
+    *"${want}"*) ;;
+    *) bad "契约不符时未报 ${want}——该维度的契约检查形同虚设";;
+  esac
+done
+
+# 损坏：语法错与类型非法都必须报 CONTRACT-INVALID 且不得崩溃。
+printf '{ "canvas_ratios": [1.778,, }' >"${tmp}/figure-contract.json"
+out="$(python3 "${here}/figure-lint.py" "${tmp}" 2>/dev/null || true)"
+case "${out}" in *CONTRACT-INVALID*) ;; *) bad "契约语法损坏时未报 CONTRACT-INVALID";; esac
+
+cat >"${tmp}/figure-contract.json" <<'JSON'
+{ "canvas_ratios": "not-a-list", "font_scale": [ {"x": 1} ], "color_tokens": 42 }
+JSON
+out="$(python3 "${here}/figure-lint.py" "${tmp}" 2>/dev/null || true)"
+case "${out}" in *CONTRACT-INVALID*) ;; *) bad "契约类型非法时未报 CONTRACT-INVALID（或已崩溃）";; esac
+
+# 多目录：两棵树各有自己的契约，必须各按各的最近契约判，不能用第一棵的套第二棵。
+mkdir -p "${t2}/a" "${t2}/b"
+cp "${here}/tests/svg/control.svg" "${t2}/a/"
+cp "${here}/tests/svg/control.svg" "${t2}/b/"
+cat >"${t2}/a/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [2.0], "font_scale": [13, 14],
+  "color_tokens": { "ink": "#111827", "primary": "#0072B2", "critical": "#D55E00",
+                    "ok": "#009E73", "surface": "#FFFFFF" } }
+JSON
+cat >"${t2}/b/figure-contract.json" <<'JSON'
+{ "canvas_ratios": [1.5], "font_scale": [13, 14],
+  "color_tokens": { "ink": "#111827", "primary": "#0072B2", "critical": "#D55E00",
+                    "ok": "#009E73", "surface": "#FFFFFF" } }
+JSON
+out="$(python3 "${here}/figure-lint.py" "${t2}/a/control.svg" "${t2}/b/control.svg" --json 2>/dev/null || true)"
+printf '%s' "${out}" | python3 -c '
+import json, sys, os
+d = json.load(sys.stdin)
+per = {os.path.basename(os.path.dirname(k)): sorted({x["code"] for x in v["findings"]})
+       for k, v in d["files"].items()}
+sys.exit(0 if per.get("a") == [] and "CONTRACT-RATIO" in per.get("b", []) else 1)
+' 2>/dev/null || bad "多目录时未按各自最近的契约判定（a 应干净、b 应报 CONTRACT-RATIO）"
+
+# ---- 退出码契约回归 ----
+# 两个 CLI 都声明「ERROR=1 / 仅 WARN=2 / 干净=0」，普通与 --json 模式一致。
+# 此前套件全程忽略退出码（|| true），把 1 改成 0 也不会转红——契约无保护。
+note "== 退出码契约（0 干净 / 2 仅 WARN / 1 有 ERROR）=="
+assert_rc() {  # <期望码> <说明> <命令...>
+  "${@:3}" >/dev/null 2>&1
+  local rc=$?
+  [ "${rc}" -eq "$1" ] || bad "退出码契约：$2 期望 $1 实得 ${rc}"
+}
+for mode in "" "--json"; do
+  label="${mode:-plain}"
+  assert_rc 0 "figure-lint 干净(${label})" python3 "${here}/figure-lint.py" "${here}/tests/svg/control.svg" ${mode}
+  assert_rc 1 "figure-lint 有 ERROR(${label})" python3 "${here}/figure-lint.py" "${here}/tests/svg/no-title.svg" ${mode}
+  assert_rc 2 "figure-lint 仅 WARN(${label})" python3 "${here}/figure-lint.py" "${here}/tests/svg/transformed.svg" ${mode}
+  assert_rc 0 "doc-lint 干净(${label})" python3 "${here}/doc-lint.py" "${here}/tests/doc/control.md" ${mode}
+  assert_rc 1 "doc-lint 有 ERROR(${label})" python3 "${here}/doc-lint.py" "${here}/tests/doc/fig-dangling.md" ${mode}
+  assert_rc 2 "doc-lint 仅 WARN(${label})" python3 "${here}/doc-lint.py" "${here}/tests/doc/no-unit.md" ${mode}
+done
+
+# ---- 读取失败不得中断整批 ----
+# 非 UTF-8 fixture **不入仓**：提交进去会打断全仓扫描器（R0 审计实测 sed 报
+# illegal byte sequence）。临时生成即可。
+note "== 读取失败隔离 =="
+python3 -c "open('${tmp}/non-utf8.svg','wb').write(b'<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 10 10\"><title>\xff\xfe</title></svg>')"
+cp "${here}/tests/svg/control.svg" "${tmp}/ok.svg"
+cp "${here}/tests/svg/figure-contract.json" "${tmp}/"
+mixed="$(python3 "${here}/figure-lint.py" "${tmp}/non-utf8.svg" "${tmp}/ok.svg" --json 2>/dev/null)"
+printf '%s' "${mixed}" | python3 -c '
+import json, sys, os
+d = json.load(sys.stdin)
+per = {os.path.basename(k): sorted({x["code"] for x in v["findings"]}) for k, v in d["files"].items()}
+ok = per.get("non-utf8.svg") == ["READ"] and per.get("ok.svg") == []
+sys.exit(0 if ok else 1)
+' 2>/dev/null || bad "坏文件未被隔离：期望 non-utf8.svg=[READ] 且 ok.svg 干净，实得 ${mixed}"
+
+# doc-lint 同样：坏 .md 报 READ 并继续，不得静默判干净。
+python3 -c "open('${tmp}/bad.md','wb').write(b'# t\n\xff\xfe\n')"
+cp "${here}/tests/doc/control.md" "${tmp}/good.md"
+dmixed="$(python3 "${here}/doc-lint.py" "${tmp}/bad.md" "${tmp}/good.md" --json 2>/dev/null)"
+printf '%s' "${dmixed}" | python3 -c '
+import json, sys, os
+d = json.load(sys.stdin)
+per = {os.path.basename(k): sorted({x["code"] for x in v["findings"]}) for k, v in d.get("files", d).items()}
+sys.exit(0 if per.get("bad.md") == ["READ"] and per.get("good.md") == [] else 1)
+' 2>/dev/null || bad "doc-lint 坏文件未被隔离：期望 bad.md=[READ] 且 good.md 干净，实得 ${dmixed}"
+
+if [ "${fail}" -eq 0 ]; then
+  note "OK: figure-lint / doc-lint 逐谓词差分与契约五态全部符合预期"
+fi
+exit "${fail}"

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/control.md

@@ -0,0 +1,10 @@
+# 正常文档
+
+## 一节
+
+| 项 | 值(元) | 说明 |
+|---|---|---|
+| A | 1 | 甲 |
+| B | 2 | 乙 |
+
+![图](fig.png)

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/empty-header.md

@@ -0,0 +1,6 @@
+# 文档
+
+|  |  |
+|---|---|
+| 甲 | 1 |
+| 乙 | 2 |

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/fake-header.md

@@ -0,0 +1,13 @@
+# 文档
+
+**小节0**
+
+**小节1**
+
+**小节2**
+
+**小节3**
+
+**小节4**
+
+**小节5**

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/fenced-noise.md

@@ -0,0 +1,14 @@
+# 围栏代码块不参与结构分析
+
+下面这段全在围栏里，任何谓词都不该被它触发。
+
+```
+── Report ────────────────────────────────────────────────
+# 这是示例里的井号行，不是本文档的标题
+| 键 |  |
+|---|---|
+| a | TBD |
+见图 9 所示。
+```
+
+正文到此。

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/fig-dangling.md

@@ -0,0 +1,5 @@
+# 文档
+
+见图 3 所示。
+
+![只有一张](fig.png)

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/fig-orphan-captioned.md

@@ -0,0 +1,11 @@
+# 文档
+
+正文只提到图 1。
+
+![一](fig.png)
+
+*图 1：第一张*
+
+![二](fig.png)
+
+*图 2：第二张，正文从未引用*

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/fig-orphan.md

@@ -0,0 +1,9 @@
+# 文档
+
+正文完全不提图。
+
+![一](fig.png)
+
+![二](fig.png)
+
+![三](fig.png)

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/imbalance.md

@@ -0,0 +1,41 @@
+# 载体错配
+
+八张表、零图，且其中一张是量级对比表——那张该出图。
+
+| 组 | 人数 |
+|---|---|
+| G1 | 7 |
+| G2 | 14 |
+| G3 | 21 |
+| G4 | 28 |
+| G5 | 35 |
+| G6 | 42 |
+| G7 | 49 |
+
+| 键 | 含义 |
+|---|---|
+| k0 | 值0 |
+
+| 键 | 含义 |
+|---|---|
+| k1 | 值1 |
+
+| 键 | 含义 |
+|---|---|
+| k2 | 值2 |
+
+| 键 | 含义 |
+|---|---|
+| k3 | 值3 |
+
+| 键 | 含义 |
+|---|---|
+| k4 | 值4 |
+
+| 键 | 含义 |
+|---|---|
+| k5 | 值5 |
+
+| 键 | 含义 |
+|---|---|
+| k6 | 值6 |

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/no-unit.md

@@ -0,0 +1,8 @@
+# 文档
+
+| 站点 | 占比 | 说明 |
+|---|---|---|
+| 甲 | 60 | x |
+| 乙 | 58 | y |
+| 丙 | 37 | z |
+| 丁 | 32 | w |

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/should-be-chart.md

@@ -0,0 +1,11 @@
+# 文档
+
+| 组 | 人数 |
+|---|---|
+| G1 | 7 |
+| G2 | 14 |
+| G3 | 21 |
+| G4 | 28 |
+| G5 | 35 |
+| G6 | 42 |
+| G7 | 49 |

package/dist/assets/marketplace/plugins/ccl-skills/skills/tighten-doc/scripts/tests/doc/tables-only-clean.md

@@ -0,0 +1,35 @@
+# 查询表文档
+
+八张纯查询表，不含量级对比，不该被要求出图。
+
+| 键 | 含义 |
+|---|---|
+| a | 甲 |
+
+| 键 | 含义 |
+|---|---|
+| b | 乙 |
+
+| 键 | 含义 |
+|---|---|
+| c | 丙 |
+
+| 键 | 含义 |
+|---|---|
+| d | 丁 |
+
+| 键 | 含义 |
+|---|---|
+| e | 戊 |
+
+| 键 | 含义 |
+|---|---|
+| f | 己 |
+
+| 键 | 含义 |
+|---|---|
+| g | 庚 |
+
+| 键 | 含义 |
+|---|---|
+| h | 辛 |