@carbon/type 10.40.0 → 10.42.0-rc.0

package/scss/vendor/@carbon/grid/modules/_mixins.scss

@@ -0,0 +1,336 @@
+//
+// Copyright IBM Corp. 2018, 2018
+//
+// This source code is licensed under the Apache-2.0 license found in the
+// LICENSE file in the root directory of this source tree.
+//
+
+@use 'sass:meta';
+@use "sass:math";
+
+@use 'config' as *;
+@use 'breakpoint' as *;
+
+// -----------------------------------------------------------------------------
+// Columns
+// -----------------------------------------------------------------------------
+
+/// Used to initialize the default properties for a column class, most notably
+/// for setting width and default gutters when a column's breakpoint has not been
+/// hit yet.
+/// @param {Number} $gutter [$grid-gutter] - The gutter for the grid system
+/// @param {Number} $collapsed-gutter [$grid-gutter--condensed] - The condensed mode gutter
+/// @access private
+/// @group @carbon/grid
+@mixin -make-col-ready(
+  $gutter: $grid-gutter,
+  $condensed-gutter: $grid-gutter--condensed
+) {
+  // Prevent columns from becoming too narrow when at smaller grid tiers by
+  // always setting `width: 100%;`. This works because we use `flex` values
+  // later on to override this initial width.
+  width: 100%;
+  padding-right: ($gutter * 0.5);
+  padding-left: ($gutter * 0.5);
+
+  // For our condensed use-case, our gutters collapse to 2px solid, 1px on each
+  // side.
+  .#{$prefix}--row--condensed &,
+  .#{$prefix}--grid--condensed & {
+    padding-right: ($condensed-gutter * 0.5);
+    padding-left: ($condensed-gutter * 0.5);
+  }
+
+  // For our narrow use-case, our container hangs 16px into the gutter
+  .#{$prefix}--row--narrow &,
+  .#{$prefix}--grid--narrow & {
+    padding-right: ($gutter * 0.5);
+    padding-left: 0;
+  }
+}
+
+/// Define the width of the column for a given span and column count.
+/// A width of 0 will hide the column entirely.
+/// @param {Number} $span - The number of columns covered
+/// @param {Number} $columns - The total number of columns available
+/// @access private
+/// @group @carbon/grid
+@mixin -make-col($span, $columns) {
+  @if $span == 0 {
+    display: none;
+  } @else {
+    // Explicitly include `display: block` to override
+    display: block;
+    // Add a `max-width` to ensure content within each column does not blow out
+    // the width of the column. Applies to IE10+ and Firefox. Chrome and Safari
+    // do not appear to require this.
+    @if meta.function-exists('div', 'math') {
+      max-width: math.percentage(math.div($span, $columns));
+      flex: 0 0 math.percentage(math.div($span, $columns));
+    } @else {
+      max-width: math.percentage(($span / $columns));
+      flex: 0 0 math.percentage(($span / $columns));
+    }
+  }
+}
+
+/// Create a column offset for a given span and column count.
+/// @param {Number} $span - The number of columns the offset should cover
+/// @param {Number} $columns - The total number of columns available
+/// @access private
+/// @group @carbon/grid
+@mixin -make-col-offset($span, $columns) {
+  $offset: 0;
+  @if meta.function-exists('div', 'math') {
+    $offset: math.div($span, $columns);
+  } @else {
+    $offset: ($span / $columns);
+  }
+  @if $offset == 0 {
+    margin-left: 0;
+  } @else {
+    margin-left: math.percentage($offset);
+  }
+}
+
+/// Output the CSS required for all the columns in a given grid system.
+/// @param {Map} $breakpoints [$grid-breakpoints] - The breakpoints in the grid system
+/// @param {Number} $gutter [$grid-gutter] - The gutter for the grid system
+/// @access private
+/// @group @carbon/grid
+@mixin -make-grid-columns(
+  $breakpoints: $grid-breakpoints,
+  $gutter: $grid-gutter
+) {
+  .#{$prefix}--col {
+    @include -make-col-ready($gutter);
+  }
+
+  @each $breakpoint in map-keys($breakpoints) {
+    $infix: breakpoint-infix($breakpoint);
+    $columns: map.get(map.get($breakpoints, $breakpoint), columns);
+
+    // Allow columns to stretch full width below their breakpoints
+    @for $i from 0 through $columns {
+      .#{$prefix}--col#{$infix}-#{$i} {
+        @include -make-col-ready($gutter);
+      }
+    }
+
+    .#{$prefix}--col#{$infix},
+    .#{$prefix}--col#{$infix}--auto {
+      @include -make-col-ready($gutter);
+    }
+
+    @include breakpoint($breakpoint, $breakpoints) {
+      // Provide basic `.col-{bp}` classes for equal-width flexbox columns
+      .#{$prefix}--col,
+      .#{$prefix}--col#{$infix} {
+        max-width: 100%;
+        flex-basis: 0;
+        flex-grow: 1;
+      }
+
+      .#{$prefix}--col--auto,
+      .#{$prefix}--col#{$infix}--auto {
+        width: auto;
+        // Reset earlier grid tiers
+        max-width: 100%;
+        flex: 1 0 0%;
+      }
+
+      @for $i from 0 through $columns {
+        .#{$prefix}--col#{$infix}-#{$i} {
+          @include -make-col($i, $columns);
+        }
+      }
+
+      @for $i from 0 through ($columns - 1) {
+        @if not($infix == '') {
+          .#{$prefix}--offset#{$infix}-#{$i} {
+            @include -make-col-offset($i, $columns);
+          }
+        }
+      }
+    }
+  }
+}
+
+// -----------------------------------------------------------------------------
+// Rows
+// -----------------------------------------------------------------------------
+
+/// Define the properties for a selector assigned to a row in the grid system.
+/// @param {Number} $gutter [$grid-gutter] - The gutter in the grid system
+/// @access private
+/// @group @carbon/grid
+@mixin make-row($gutter: $grid-gutter) {
+  display: flex;
+  flex-wrap: wrap;
+  margin-right: -1 * $gutter * 0.5;
+  margin-left: -1 * $gutter * 0.5;
+}
+
+// -----------------------------------------------------------------------------
+// No gutter
+// -----------------------------------------------------------------------------
+
+/// Add `no-gutter` and `no-gutter--{start,end}` classes to the output CSS. These
+/// classes are useful for dropping the gutter in fluid situations.
+/// @access private
+/// @group @carbon/grid
+@mixin -no-gutter {
+  .#{$prefix}--no-gutter,
+  .#{$prefix}--row.#{$prefix}--no-gutter [class*='#{$prefix}--col'] {
+    padding-right: 0;
+    padding-left: 0;
+  }
+
+  .#{$prefix}--no-gutter--start,
+  .#{$prefix}--row.#{$prefix}--no-gutter--start [class*='#{$prefix}--col'] {
+    padding-left: 0;
+  }
+
+  .#{$prefix}--no-gutter--end,
+  .#{$prefix}--row.#{$prefix}--no-gutter--end [class*='#{$prefix}--col'] {
+    padding-right: 0;
+  }
+
+  // Deprecated ☠️
+  .#{$prefix}--no-gutter--left,
+  .#{$prefix}--row.#{$prefix}--no-gutter--left [class*='#{$prefix}--col'] {
+    padding-left: 0;
+  }
+
+  .#{$prefix}--no-gutter--right,
+  .#{$prefix}--row.#{$prefix}--no-gutter--right [class*='#{$prefix}--col'] {
+    padding-right: 0;
+  }
+}
+
+// -----------------------------------------------------------------------------
+// Hang
+// -----------------------------------------------------------------------------
+
+/// Add `hang--start` and `hang--end` classes for a given gutter. These classes are
+/// used alongside `no-gutter--start` and `no-gutter--end` to "hang" type.
+/// @param {Number} $gutter [$grid-gutter] - The gutter in the grid system
+/// @access private
+/// @group @carbon/grid
+@mixin -hang($gutter: $grid-gutter) {
+  .#{$prefix}--hang--start {
+    padding-left: ($gutter * 0.5);
+  }
+
+  .#{$prefix}--hang--end {
+    padding-right: ($gutter * 0.5);
+  }
+
+  // Deprecated ☠️
+  .#{$prefix}--hang--left {
+    padding-left: ($gutter * 0.5);
+  }
+
+  .#{$prefix}--hang--right {
+    padding-right: ($gutter * 0.5);
+  }
+}
+
+// -----------------------------------------------------------------------------
+// Grid
+// -----------------------------------------------------------------------------
+
+/// Create the container for a grid. Will cause full-bleed for the grid unless
+/// max-width properties are added with `-make-container-max-widths`
+/// @param {Map} $breakpoints [$grid-breakpoints] - A map of breakpoints where the key is the name
+/// @access private
+/// @group @carbon/grid
+@mixin -make-container($breakpoints: $grid-breakpoints) {
+  margin-right: auto;
+  margin-left: auto;
+
+  @include -set-largest-breakpoint();
+
+  @each $name, $value in $breakpoints {
+    $prev-breakpoint: map.get($breakpoints, breakpoint-prev($name));
+    $margin: map.get($value, margin);
+
+    @if $prev-breakpoint {
+      $prev-margin: map.get($prev-breakpoint, margin);
+      @if $prev-margin != $margin {
+        @include breakpoint($name) {
+          padding-right: #{($grid-gutter * 0.5) + $margin};
+          padding-left: #{($grid-gutter * 0.5) + $margin};
+        }
+      }
+    } @else {
+      @include breakpoint($name) {
+        padding-right: #{($grid-gutter * 0.5) + $margin};
+        padding-left: #{($grid-gutter * 0.5) + $margin};
+      }
+    }
+  }
+}
+
+/// Get the last breakpoint width and set max-width to its value
+/// @param {Map} $breakpoints [$grid-breakpoints] - A map of breakpoints where the key is the name
+/// @access private
+/// @group @carbon/grid
+@mixin -set-largest-breakpoint($breakpoints: $grid-breakpoints) {
+  $largest-breakpoint: last-map-item($breakpoints);
+
+  max-width: map.get($largest-breakpoint, 'width');
+}
+
+/// Add in the max-widths for each breakpoint to the container
+/// @param {Map} $breakpoints [$grid-breakpoints] - A map of breakpoints where the key is the name
+/// @access private
+/// @group @carbon/grid
+@mixin -make-container-max-widths($breakpoints: $grid-breakpoints) {
+  @each $name, $value in $breakpoints {
+    @include breakpoint($name) {
+      max-width: map.get($value, width);
+    }
+  }
+}
+
+/// Generate the CSS for a grid for the given breakpoints and gutters
+/// @param {Map} $breakpoints [$grid-breakpoints] - The default breakpoints
+/// @param {Number} $grid-gutter [$grid-gutter] - The default gutters
+/// @param {Number} $condensed-gutter [$grid-gutter--condensed] - The condensed mode gutter
+/// @access public
+/// @group @carbon/grid
+@mixin grid(
+  $breakpoints: $grid-breakpoints,
+  $grid-gutter: $grid-gutter,
+  $condensed-gutter: $grid-gutter--condensed
+) {
+  .#{$prefix}--grid {
+    @include -make-container($breakpoints);
+  }
+
+  @include largest-breakpoint($breakpoints) {
+    .#{$prefix}--grid--full-width {
+      max-width: 100%;
+    }
+  }
+
+  .#{$prefix}--row {
+    @include make-row();
+  }
+
+  .#{$prefix}--row-padding [class*='#{$prefix}--col'],
+  .#{$prefix}--col-padding {
+    padding-top: $grid-gutter * 0.5;
+    padding-bottom: $grid-gutter * 0.5;
+  }
+
+  .#{$prefix}--grid--condensed [class*='#{$prefix}--col'] {
+    padding-top: $condensed-gutter * 0.5;
+    padding-bottom: $condensed-gutter * 0.5;
+  }
+
+  @include -make-grid-columns($breakpoints, $grid-gutter);
+  @include -no-gutter();
+  @include -hang($grid-gutter);
+}

package/scss/vendor/@carbon/grid/vendor/@carbon/import-once/import-once.scss

@@ -0,0 +1,27 @@
+//
+// Copyright IBM Corp. 2018, 2018
+//
+// This source code is licensed under the Apache-2.0 license found in the
+// LICENSE file in the root directory of this source tree.
+//
+
+/// Used by `exports` mixin to track which modules have been imported
+/// @type Map
+/// @access public
+/// @group @carbon/import-once
+$imported-modules: () !default;
+
+/// Module export mixin that helps making sure a module is imported once and only once
+/// @access public
+/// @param {String} $name - Name of exported module
+/// @param {Bool} $warn [false] - Warn when a module has been already imported
+/// @content Declaration blocks to be imported
+/// @group @carbon/import-once
+@mixin exports($name, $warn: false) {
+  @if not(index($imported-modules, $name)) {
+    $imported-modules: append($imported-modules, $name) !global;
+    @content;
+  } @else if $warn == true {
+    @warn 'Module `#{$name}` has already been imported.';
+  }
+}

package/scss/vendor/@carbon/grid/vendor/@carbon/import-once/index.scss

@@ -0,0 +1,8 @@
+//
+// Copyright IBM Corp. 2018, 2018
+//
+// This source code is licensed under the Apache-2.0 license found in the
+// LICENSE file in the root directory of this source tree.
+//
+
+@import 'import-once';

package/scss/vendor/@carbon/{layout → grid/vendor/@carbon/layout}/_key-height.import.scss

@@ -21,8 +21,8 @@
 
 @use 'sass:meta';
 @use "sass:math";
-@import 'breakpoint'; /* stylelint-disable-line no-invalid-position-at-import-rule */
-@import 'utilities'; /* stylelint-disable-line no-invalid-position-at-import-rule */
+@import 'breakpoint';
+@import 'utilities';
 
 /// Get the column width for a given breakpoint
 /// @param {String} $breakpoint

package/scss/vendor/@carbon/{layout → grid/vendor/@carbon/layout}/modules/_utilities.scss

@@ -14,7 +14,7 @@
 /// @group @carbon/layout
 @function map-deep-get($map, $keys...) {
   @each $key in $keys {
-    $map: map-get($map, $key);
+    $map: map.get($map, $key);
   }
   @return $map;
 }
@@ -26,7 +26,7 @@
 /// @return {String} Desired value
 /// @group @carbon/layout
 @function key-by-index($map, $index) {
-  $keys: map-keys($map);
+  $keys: map.keys($map);
   @return nth($keys, $index);
 }
 
@@ -36,6 +36,6 @@
 /// @return {*} Desired value
 /// @group @carbon/layout
 @function last-map-item($map) {
-  $total-length: length($map);
+  $total-length: list.length($map);
   @return map-get($map, carbon--key-by-index($map, $total-length));
 }

package/scss/vendor/@carbon/import-once/import-once.scss

@@ -18,7 +18,7 @@ $imported-modules: () !default;
 /// @content Declaration blocks to be imported
 /// @group @carbon/import-once
 @mixin exports($name, $warn: false) {
-  @if (index($imported-modules, $name) == null) {
+  @if not(index($imported-modules, $name)) {
     $imported-modules: append($imported-modules, $name) !global;
     @content;
   } @else if $warn == true {