@capgo/capacitor-social-login 8.3.37 → 8.3.38

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/README.md CHANGED
@@ -466,6 +466,23 @@ This almost always means Google rejected the combination of **installed APK sign
466
466
 
467
467
  `USER_CANCELLED` after picking an account on a misconfigured debug build can still be a SHA-1 / client-ID mismatch — fix the console setup above first.
468
468
 
469
+ ##### Error `[16] Account reauth failed`
470
+
471
+ This error comes from Google Credential Manager when re-authenticating a cached Google account fails. It often affects **only some users** on the same build while others sign in normally.
472
+
473
+ **Automatic recovery:** On the first `[16]` failure, the plugin clears Credential Manager credential-selection state and retries once with the standard sign-in UI (`filterByAuthorizedAccounts: false`). No app code change is required for this retry.
474
+
475
+ If the retry still fails for specific users, check:
476
+
477
+ 1. **OAuth consent screen** — must be **External** (Internal / Workspace-only blocks consumer `@gmail.com` accounts).
478
+ 2. **Testing mode** — every failing Google account must be listed under **Audience → Test users**.
479
+ 3. **Sign in with Google setting** — the user may have disabled your app under Google Account → **Sign in with Google**.
480
+ 4. **Family Link / supervised accounts** — ensure `filterByAuthorizedAccounts` is not explicitly set to `true` (the default is `false`; see [Family Link section](#google-sign-in-with-family-link-supervised-accounts) below).
481
+ 5. **Play App Signing SHA-1** — still required for Play Store builds even when most users succeed (some device/account paths are stricter).
482
+ 6. **Explicit override** — if your app sets `filterByAuthorizedAccounts: true`, set it back to `false` for affected users; the default already skips authorized-account filtering.
483
+
484
+ After a failure, filter Logcat for `GoogleProvider` — the plugin logs `package`, `signingSha1`, and `webClientId`.
485
+
469
486
  ##### Extract SHA-1 from the build you install
470
487
 
471
488
  Debug / local builds:
@@ -755,13 +772,26 @@ On Android, this error comes from **Google Credential Manager** when the install
755
772
 
756
773
  See [Android troubleshooting (Credential Manager, SHA-1, and Firebase)](#android-troubleshooting-credential-manager-sha-1-and-firebase) for the full checklist. After a failed login, filter Logcat for `GoogleProvider` — the plugin prints `package`, `signingSha1`, and `webClientId` to compare with your OAuth clients.
757
774
 
775
+ ### Google Sign-In `[16] Account reauth failed` (Android)
776
+
777
+ Credential Manager returns this when re-authenticating a previously used Google account fails. It can affect a **subset of users** on the same app version.
778
+
779
+ The plugin automatically clears Credential Manager credential-selection state and retries once with the standard account picker. If login still fails for specific accounts, see the `[16] Account reauth failed` subsection under [Android troubleshooting](#android-troubleshooting-credential-manager-sha-1-and-firebase) (OAuth consent External vs Internal, test users, Family Link, Sign in with Google account setting).
780
+
758
781
  ### Google Sign-In with Family Link Supervised Accounts
759
782
 
760
783
  **Problem**: When users try to sign in with Google accounts supervised by Family Link, login fails with:
761
- ```
784
+
785
+ ```text
762
786
  NoCredentialException: No credentials available
763
787
  ```
764
788
 
789
+ or, in some cases:
790
+
791
+ ```text
792
+ [16] Account reauth failed
793
+ ```
794
+
765
795
  **Root Cause**: Family Link supervised accounts have different authentication requirements and may not work properly with certain Google Sign-In configurations.
766
796
 
767
797
  **Solution**:
@@ -775,14 +805,14 @@ await SocialLogin.login({
775
805
  provider: 'google',
776
806
  options: {
777
807
  style: 'bottom', // or 'standard'
778
- filterByAuthorizedAccounts: false, // Important for Family Link (default is true)
808
+ filterByAuthorizedAccounts: false, // Important for Family Link (default is false; set explicitly when using bottom UI)
779
809
  scopes: ['profile', 'email']
780
810
  }
781
811
  });
782
812
  ```
783
813
 
784
814
  **Key Points**:
785
- - Set `filterByAuthorizedAccounts` to `false` to ensure Family Link accounts are visible (default is `true`)
815
+ - Do not set `filterByAuthorizedAccounts` to `true` when supporting Family Link accounts (default is `false`)
786
816
  - The plugin will automatically retry with 'standard' style if 'bottom' style fails with NoCredentialException
787
817
  - These options only affect Android; iOS handles Family Link accounts normally
788
818
  - The error message will suggest disabling `filterByAuthorizedAccounts` if login fails
@@ -1317,7 +1347,7 @@ Configuration for a single OAuth2 provider instance
1317
1347
  | **`forceRefreshToken`** | <code>boolean</code> | Force refresh token (only for Android) | <code>false</code> | |
1318
1348
  | **`forcePrompt`** | <code>boolean</code> | Force account selection prompt (iOS) | <code>false</code> | |
1319
1349
  | **`style`** | <code>'bottom' \| 'standard'</code> | Style | <code>'standard'</code> | |
1320
- | **`filterByAuthorizedAccounts`** | <code>boolean</code> | Filter by authorized accounts (Android only) | <code>true</code> | |
1350
+ | **`filterByAuthorizedAccounts`** | <code>boolean</code> | Filter by authorized accounts (Android only) | <code>false</code> | |
1321
1351
  | **`autoSelectEnabled`** | <code>boolean</code> | Auto select enabled (Android only) | <code>false</code> | |
1322
1352
  | **`prompt`** | <code>'none' \| 'consent' \| 'select_account' \| 'consent select_account' \| 'select_account consent'</code> | Prompt parameter for Google OAuth (Web only) | | 7.12.0 |
1323
1353
 
@@ -62,6 +62,7 @@ public class GoogleProvider implements SocialProvider {
62
62
 
63
63
  private static final String LOG_TAG = "GoogleProvider";
64
64
  private static final String USER_CANCELLED_CODE = "USER_CANCELLED";
65
+ private static final String REAUTH_RETRY_FLAG = "_googleReauthRetry";
65
66
  private static final String SHARED_PREFERENCE_NAME = "GOOGLE_LOGIN_F13oz0I_SHARED_PERF";
66
67
  private static final String GOOGLE_DATA_PREFERENCE = "GOOGLE_LOGIN_GOOGLE_DATA_9158025e-947d-4211-ba51-40451630cc47";
67
68
  private static final Integer FUTURE_LIST_LENGTH = 128;
@@ -735,6 +736,86 @@ public class GoogleProvider implements SocialProvider {
735
736
  return message.contains("Developer console") || message.contains("28444") || message.contains("10:");
736
737
  }
737
738
 
739
+ private boolean isAccountReauthFailed(String message) {
740
+ return message != null && message.contains("Account reauth failed");
741
+ }
742
+
743
+ private boolean isReauthRetry(PluginCall call) {
744
+ return call.getData().optBoolean(REAUTH_RETRY_FLAG, false);
745
+ }
746
+
747
+ private void markReauthRetry(PluginCall call) {
748
+ call.getData().put(REAUTH_RETRY_FLAG, true);
749
+ }
750
+
751
+ private void logAccountReauthFailedHelp(String errorMessage) {
752
+ String sha1 = getSigningCertificateSha1(context);
753
+ Log.e(
754
+ LOG_TAG,
755
+ String.format(
756
+ "Google account reauth failed (%s). package=%s signingSha1=%s webClientId=%s. " +
757
+ "If only some users fail consistently: (1) OAuth consent screen must be External (not Internal/Workspace-only); " +
758
+ "(2) in Testing mode, each failing account must be a test user; " +
759
+ "(3) user may have disabled Sign in with Google for this app in Google Account settings; " +
760
+ "(4) Family Link / supervised accounts need filterByAuthorizedAccounts: false; " +
761
+ "(5) stale Credential Manager state — plugin already retried after clearing credentials; " +
762
+ "(6) verify Play App Signing SHA-1 for Play Store builds.",
763
+ errorMessage,
764
+ context.getPackageName(),
765
+ sha1 != null ? sha1 : "unknown",
766
+ maskClientId(clientId)
767
+ )
768
+ );
769
+ }
770
+
771
+ private void retryLoginAfterReauthFailure(PluginCall call, JSONObject config, JSONObject options) {
772
+ try {
773
+ options.put("style", "standard");
774
+ options.put("filterByAuthorizedAccounts", false);
775
+ call.getData().put("options", options);
776
+ } catch (JSONException ex) {
777
+ call.reject("Google Sign-In failed: " + ex.getMessage());
778
+ return;
779
+ }
780
+ login(call, config);
781
+ }
782
+
783
+ private void handleAccountReauthFailed(GetCredentialException e, PluginCall call, JSONObject config, JSONObject options) {
784
+ String errorMessage = e.getMessage() != null ? e.getMessage() : e.getClass().getSimpleName();
785
+
786
+ if (isReauthRetry(call)) {
787
+ logAccountReauthFailedHelp(errorMessage);
788
+ call.reject(
789
+ "Google Sign-In failed: [16] Account reauth failed. The plugin cleared Credential Manager credential-selection state and retried once. " +
790
+ "If this affects only some users, check OAuth consent screen (External vs Internal, test users in Testing mode), " +
791
+ "Family Link accounts (ensure filterByAuthorizedAccounts is not set to true), and whether the user disabled Sign in with Google for your app. " +
792
+ "See Logcat tag GoogleProvider for package, signingSha1, and webClientId."
793
+ );
794
+ return;
795
+ }
796
+
797
+ Log.w(
798
+ LOG_TAG,
799
+ "Account reauth failed; clearing Credential Manager credential-selection state and retrying with standard sign-in flow."
800
+ );
801
+ markReauthRetry(call);
802
+
803
+ clearCredentialManagerState(
804
+ new CredentialManagerCallback<Void, Exception>() {
805
+ @Override
806
+ public void onResult(Void unused) {
807
+ retryLoginAfterReauthFailure(call, config, options);
808
+ }
809
+
810
+ @Override
811
+ public void onError(@NonNull Exception clearError) {
812
+ Log.w(LOG_TAG, "Failed to clear Credential Manager state before reauth retry; retrying sign-in anyway.", clearError);
813
+ retryLoginAfterReauthFailure(call, config, options);
814
+ }
815
+ }
816
+ );
817
+ }
818
+
738
819
  private void logDeveloperConsoleMisconfigurationHelp(String errorMessage) {
739
820
  String sha1 = getSigningCertificateSha1(context);
740
821
  Log.e(
@@ -777,6 +858,10 @@ public class GoogleProvider implements SocialProvider {
777
858
  // do nothing
778
859
  }
779
860
  }
861
+ if (isAccountReauthFailed(errorMessage)) {
862
+ handleAccountReauthFailed(e, call, config, options);
863
+ return;
864
+ }
780
865
  if (e instanceof GetCredentialCancellationException) {
781
866
  call.reject("Google Sign-In cancelled by user", USER_CANCELLED_CODE, e);
782
867
  return;
@@ -868,8 +953,7 @@ public class GoogleProvider implements SocialProvider {
868
953
  return user;
869
954
  }
870
955
 
871
- private void rawLogout(CredentialManagerCallback<Void, Exception> handler) {
872
- Log.i(LOG_TAG, "Logout requested");
956
+ private void clearCredentialManagerState(CredentialManagerCallback<Void, Exception> handler) {
873
957
  ClearCredentialStateRequest request = new ClearCredentialStateRequest();
874
958
 
875
959
  Executor executor = Executors.newSingleThreadExecutor();
@@ -880,6 +964,23 @@ public class GoogleProvider implements SocialProvider {
880
964
  new CredentialManagerCallback<Void, ClearCredentialException>() {
881
965
  @Override
882
966
  public void onResult(Void result) {
967
+ handler.onResult(null);
968
+ }
969
+
970
+ @Override
971
+ public void onError(@NonNull ClearCredentialException e) {
972
+ handler.onError(e);
973
+ }
974
+ }
975
+ );
976
+ }
977
+
978
+ private void rawLogout(CredentialManagerCallback<Void, Exception> handler) {
979
+ Log.i(LOG_TAG, "Logout requested");
980
+ clearCredentialManagerState(
981
+ new CredentialManagerCallback<Void, Exception>() {
982
+ @Override
983
+ public void onResult(Void unused) {
883
984
  context.getSharedPreferences(SHARED_PREFERENCE_NAME, Context.MODE_PRIVATE).edit().clear().apply();
884
985
  GoogleProvider.this.accessToken = null;
885
986
  GoogleProvider.this.idToken = null;
@@ -887,7 +988,7 @@ public class GoogleProvider implements SocialProvider {
887
988
  }
888
989
 
889
990
  @Override
890
- public void onError(@NonNull ClearCredentialException e) {
991
+ public void onError(@NonNull Exception e) {
891
992
  Log.e(LOG_TAG, "Failed to clear credential state", e);
892
993
  handler.onError(e);
893
994
  }
@@ -24,7 +24,7 @@ import org.json.JSONObject;
24
24
  @CapacitorPlugin(name = "SocialLogin")
25
25
  public class SocialLoginPlugin extends Plugin {
26
26
 
27
- private final String pluginVersion = "8.3.37";
27
+ private final String pluginVersion = "8.3.38";
28
28
 
29
29
  public static String LOG_TAG = "CapgoSocialLogin";
30
30
  public HashMap<String, SocialProvider> socialProviderHashMap = new HashMap<>();
package/dist/docs.json CHANGED
@@ -1285,7 +1285,7 @@
1285
1285
  "name": "description"
1286
1286
  },
1287
1287
  {
1288
- "text": "true",
1288
+ "text": "false",
1289
1289
  "name": "default"
1290
1290
  }
1291
1291
  ],
@@ -536,7 +536,7 @@ export interface GoogleLoginOptions {
536
536
  * @description Only show accounts that have previously been used to sign in to the app.
537
537
  * This option is only available for the 'bottom' style.
538
538
  * Note: For Family Link supervised accounts, this should be set to false.
539
- * @default true
539
+ * @default false
540
540
  */
541
541
  filterByAuthorizedAccounts?: boolean;
542
542
  /**
@@ -1 +1 @@
1
- {"version":3,"file":"definitions.js","sourceRoot":"","sources":["../../src/definitions.ts"],"names":[],"mappings":"","sourcesContent":["/**\n * Configuration for a single OAuth2 provider instance\n */\nexport interface OAuth2ProviderConfig {\n /**\n * The OAuth 2.0 client identifier (App ID / Client ID).\n *\n * Note: this configuration object is only used by the plugin's built-in `oauth2` provider\n * (i.e. `SocialLogin.initialize({ oauth2: { ... } })`). It does not affect Google/Apple/Facebook/Twitter.\n * @example 'your-client-id'\n */\n appId?: string;\n /**\n * Alias for `appId` to match common OAuth/OIDC naming (`clientId`).\n * If both are provided, `appId` takes precedence.\n * @example 'your-client-id'\n */\n clientId?: string;\n /**\n * OpenID Connect issuer URL (enables discovery via `/.well-known/openid-configuration`).\n * When set, you may omit explicit endpoints like `authorizationBaseUrl` and `accessTokenEndpoint`.\n *\n * Notes:\n * - Explicit endpoints (authorization/token/logout) take precedence over discovered values.\n * - Discovery is supported for `oauth2` on Web, iOS, and Android.\n *\n * @example 'https://accounts.example.com'\n */\n issuerUrl?: string;\n /**\n * The base URL of the authorization endpoint\n * @example 'https://accounts.example.com/oauth2/authorize'\n */\n authorizationBaseUrl?: string;\n /**\n * Alias for `authorizationBaseUrl` (to match common OAuth/OIDC naming).\n * @example 'https://accounts.example.com/oauth2/authorize'\n */\n authorizationEndpoint?: string;\n /**\n * OAuth 2.0 client secret for token requests (e.g., when exchanging the code).\n * This value is sent as `client_secret` in token/refresh requests when provided.\n */\n clientSecret?: string;\n /**\n * The URL to exchange the authorization code for tokens\n * Required for authorization code flow\n * @example 'https://accounts.example.com/oauth2/token'\n */\n accessTokenEndpoint?: string;\n /**\n * Alias for `accessTokenEndpoint` (to match common OAuth/OIDC naming).\n * @example 'https://accounts.example.com/oauth2/token'\n */\n tokenEndpoint?: string;\n /**\n * Redirect URL that receives the OAuth callback\n * @example 'myapp://oauth/callback'\n */\n redirectUrl: string;\n /**\n * Optional URL to fetch user profile/resource data after authentication\n * The access token will be sent as Bearer token in the Authorization header\n * @example 'https://api.example.com/userinfo'\n */\n resourceUrl?: string;\n /**\n * The OAuth response type\n * - 'code': Authorization Code flow (recommended, requires accessTokenEndpoint)\n * - 'token': Implicit flow (less secure, tokens returned directly)\n * @default 'code'\n */\n responseType?: 'code' | 'token';\n /**\n * Enable PKCE (Proof Key for Code Exchange)\n * Strongly recommended for public clients (mobile/web apps)\n * @default true\n */\n pkceEnabled?: boolean;\n /**\n * Default scopes to request during authorization\n * @example 'openid profile email'\n * @example ['openid','profile','email']\n */\n scope?: string | string[];\n /**\n * Alias for `scope` using common naming (`scopes`).\n * If both are provided, `scope` takes precedence.\n */\n scopes?: string[];\n /**\n * Additional parameters to include in the authorization request\n * @example { prompt: 'consent', login_hint: 'user@example.com' }\n */\n additionalParameters?: Record<string, string>;\n /**\n * Convenience option for OIDC `login_hint`.\n * Equivalent to passing `additionalParameters.login_hint`.\n */\n loginHint?: string;\n /**\n * Convenience option for OAuth/OIDC `prompt`.\n * Equivalent to passing `additionalParameters.prompt`.\n */\n prompt?: string;\n /**\n * Additional parameters to include in token requests (code exchange / refresh).\n * Useful for providers that require non-standard parameters.\n */\n additionalTokenParameters?: Record<string, string>;\n /**\n * Additional headers to include when fetching the resource URL\n * @example { 'X-Custom-Header': 'value' }\n */\n additionalResourceHeaders?: Record<string, string>;\n /**\n * Custom logout URL for ending the session\n * @example 'https://accounts.example.com/logout'\n */\n logoutUrl?: string;\n /**\n * Alias for `logoutUrl` to match OIDC naming (`endSessionEndpoint`).\n * @example 'https://accounts.example.com/logout'\n */\n endSessionEndpoint?: string;\n /**\n * OIDC post logout redirect URL (sent as `post_logout_redirect_uri` when building the end-session URL).\n * @example 'myapp://logout/callback'\n */\n postLogoutRedirectUrl?: string;\n /**\n * Additional parameters to include in logout / end-session URL.\n */\n additionalLogoutParameters?: Record<string, string>;\n /**\n * iOS-only: Whether to prefer an ephemeral browser session for ASWebAuthenticationSession.\n * Defaults to true to match existing behavior in this plugin.\n */\n iosPrefersEphemeralWebBrowserSession?: boolean;\n /**\n * Alias for `iosPrefersEphemeralWebBrowserSession` (to match Capawesome OAuth naming).\n */\n iosPrefersEphemeralSession?: boolean;\n /**\n * Enable debug logging\n * @default false\n */\n logsEnabled?: boolean;\n}\n\nexport interface InitializeOptions {\n /**\n * OAuth2 provider configurations.\n * Supports multiple providers by using a Record with provider IDs as keys.\n * @example\n * {\n * github: { appId: '...', authorizationBaseUrl: 'https://github.com/login/oauth/authorize', ... },\n * azure: { appId: '...', authorizationBaseUrl: 'https://login.microsoftonline.com/.../oauth2/v2.0/authorize', ... }\n * }\n */\n oauth2?: Record<string, OAuth2ProviderConfig>;\n twitter?: {\n /**\n * The OAuth 2.0 client identifier issued by X (Twitter) Developer Portal\n * @example 'Y2xpZW50SWQ'\n */\n clientId: string;\n /**\n * Redirect URL that is registered inside the X Developer Portal.\n * The plugin uses this URL on every platform to receive the authorization code.\n * @example 'myapp://auth/x'\n */\n redirectUrl: string;\n /**\n * Default scopes appended to every login request when no custom scopes are provided.\n * @description Defaults to the minimum required scopes for Log in with X.\n * @default ['tweet.read','users.read']\n */\n defaultScopes?: string[];\n /**\n * Force the consent screen to show on every login attempt.\n * Mirrors X's `force_login=true` flag.\n * @default false\n */\n forceLogin?: boolean;\n /**\n * Optional audience value when your application has been approved for multi-tenant access.\n */\n audience?: string;\n };\n facebook?: {\n /**\n * Facebook App ID, provided by Facebook for web, in mobile it's set in the native files\n * @description For business integrations, use your Business App ID from Facebook Developer Console.\n * Business apps can access additional permissions like Instagram API, Pages API, and business management features.\n * @see docs/facebook_business_login.md for business app setup guide\n */\n appId: string;\n /**\n * Facebook Client Token, provided by Facebook for web, in mobile it's set in the native files\n */\n clientToken?: string;\n /**\n * Locale\n * @description The locale to use for the Facebook SDK (e.g., 'en_US', 'fr_FR', 'es_ES')\n * @default 'en_US'\n * @example 'fr_FR'\n */\n locale?: string;\n };\n\n google?: {\n /**\n * The app's client ID, found and created in the Google Developers Console.\n * Required for iOS platform.\n * @example xxxxxx-xxxxxxxxxxxxxxxxxx.apps.googleusercontent.com\n * @since 3.1.0\n */\n iOSClientId?: string;\n /**\n * The app's server client ID, required for offline mode on iOS.\n * Should be the same value as webClientId.\n * Found and created in the Google Developers Console.\n * @example xxxxxx-xxxxxxxxxxxxxxxxxx.apps.googleusercontent.com\n * @since 3.1.0\n */\n iOSServerClientId?: string;\n /**\n * The app's web client ID, found and created in the Google Developers Console.\n * Required for Android and Web platforms.\n * @example xxxxxx-xxxxxxxxxxxxxxxxxx.apps.googleusercontent.com\n * @since 3.1.0\n */\n webClientId?: string;\n /**\n * The login mode, can be online or offline.\n *\n * **Online mode (default):**\n * - Returns user profile data and access tokens\n * - Supports all methods: login, logout, isLoggedIn, getAuthorizationCode\n *\n * **Offline mode:**\n * - Returns only serverAuthCode for backend authentication\n * - No user profile data available\n * - **Limitations:** The following methods are NOT supported in offline mode:\n * - `logout()` - Will reject with \"not implemented when using offline mode\"\n * - `isLoggedIn()` - Will reject with \"not implemented when using offline mode\"\n * - `getAuthorizationCode()` - Will reject with \"not implemented when using offline mode\"\n * - `refresh()` - Will reject because offline mode only returns `serverAuthCode`; token refresh must happen on your backend\n * - Only `login()` method works in offline mode, returning serverAuthCode only\n * - `serverAuthCode` must be exchanged on your backend for access/refresh tokens\n * - Requires `iOSServerClientId` to be set on iOS\n *\n * @example 'offline'\n * @default 'online'\n * @since 3.1.0\n */\n mode?: 'online' | 'offline';\n /**\n * Filter visible accounts by hosted domain\n * @description filter visible accounts by hosted domain\n */\n hostedDomain?: string;\n /**\n * Google Redirect URL, should be your backend url that is configured in your google app\n */\n redirectUrl?: string;\n };\n apple?: {\n /**\n * Apple Client ID, provided by Apple for web and Android\n */\n clientId?: string;\n /**\n * Apple Redirect URL, should be your backend url that is configured in your apple app\n *\n * **Note**: Use empty string `''` for iOS to prevent redirect.\n * **Note**: Not required when using Broadcast Channel mode on Android.\n */\n redirectUrl?: string;\n /**\n * Use proper token exchange for Apple Sign-In\n * @description Controls how Apple Sign-In tokens are handled and what gets returned:\n *\n * **When `true` (Recommended for new implementations):**\n * - Exchanges authorization code for proper access tokens via Apple's token endpoint\n * - `idToken`: JWT containing user identity information (email, name, user ID)\n * - `accessToken.token`: Proper access token from Apple (short-lived, ~1 hour)\n * - `authorizationCode`: Raw authorization code for backend token exchange\n *\n * **When `false` (Default - Legacy mode):**\n * - Uses authorization code directly as access token for backward compatibility\n * - `idToken`: JWT containing user identity information (email, name, user ID)\n * - `accessToken.token`: The authorization code itself (not a real access token)\n * - `authorizationCode`: undefined\n *\n * @default false\n * @example\n * // Enable proper token exchange (recommended)\n * useProperTokenExchange: true\n * // Result: idToken=JWT, accessToken=real_token, authorizationCode=present\n *\n * // Legacy mode (backward compatibility)\n * useProperTokenExchange: false\n * // Result: idToken=JWT, accessToken=auth_code, authorizationCode=undefined\n */\n useProperTokenExchange?: boolean;\n /**\n * Use Broadcast Channel for Android Apple Sign-In (Recommended)\n * @description When enabled, Android uses Broadcast Channel API instead of URL redirects.\n * This eliminates the need for redirect URL configuration and server-side setup.\n *\n * **Benefits:**\n * - No redirect URL configuration required\n * - No backend server needed for Android\n * - Simpler setup and more reliable communication\n * - Direct client-server communication via Broadcast Channel\n *\n * **When `true`:**\n * - Uses Broadcast Channel for authentication flow\n * - `redirectUrl` is ignored\n * - Requires Broadcast Channel compatible backend or direct token handling\n *\n * **When `false` (Default - Legacy mode):**\n * - Uses traditional URL redirect flow\n * - Requires `redirectUrl` configuration\n * - Requires backend server for token exchange\n *\n * @default false\n * @since 7.10.0\n * @example\n * // Enable Broadcast Channel mode (recommended for new Android implementations)\n * useBroadcastChannel: true\n * // Result: Simplified setup, no redirect URL needed\n *\n * // Legacy mode (backward compatibility)\n * useBroadcastChannel: false\n * // Result: Traditional URL redirect flow with server-side setup\n */\n useBroadcastChannel?: boolean;\n };\n}\n\nexport interface FacebookLoginOptions {\n /**\n * Permissions\n * @description Select permissions to login with. Supports both consumer and business permissions.\n *\n * **Consumer Permissions:**\n * - `email` - User's email address\n * - `public_profile` - User's public profile info\n * - `user_friends` - List of friends who also use your app\n *\n * **Business Permissions** (require business app configuration and may need App Review):\n * - `instagram_basic` - Instagram Basic Display API access\n * - `instagram_manage_insights` - Instagram Insights data\n * - `instagram_manage_comments` - Manage Instagram comments\n * - `instagram_content_publish` - Publish to Instagram\n * - `pages_show_list` - List of Pages managed by user\n * - `pages_read_engagement` - Read Page engagement metrics\n * - `pages_manage_posts` - Manage Page posts\n * - `pages_messaging` - Page messaging features\n * - `business_management` - Manage business assets\n * - `catalog_management` - Manage product catalogs\n * - `ads_management` - Manage advertising accounts\n *\n * @example ['email', 'public_profile'] // Consumer permissions\n * @example ['email', 'instagram_basic', 'pages_show_list'] // Business permissions\n * @see https://developers.facebook.com/docs/permissions/reference\n * @see docs/facebook_business_login.md for complete business integration guide\n */\n permissions: string[];\n /**\n * Is Limited Login\n * @description use limited login for Facebook iOS only. Important: This is iOS-only and doesn't affect Android.\n * Even if set to false, Facebook will automatically force it to true if App Tracking Transparency (ATT) permission is not granted.\n * Developers should always be prepared to handle both limited and full login scenarios.\n * @default false\n */\n limitedLogin?: boolean;\n /**\n * Nonce\n * @description A custom nonce to use for the login request\n */\n nonce?: string;\n}\n\nexport interface TwitterLoginOptions {\n /**\n * Additional scopes to request during login.\n * If omitted the plugin falls back to the default scopes configured during initialization.\n * @example ['tweet.read','users.read','offline.access']\n */\n scopes?: string[];\n /**\n * Provide a custom OAuth state value.\n * When not provided the plugin generates a cryptographically random value.\n */\n state?: string;\n /**\n * Provide a pre-computed PKCE code verifier (mostly used for testing).\n * When omitted the plugin generates a secure verifier automatically.\n */\n codeVerifier?: string;\n /**\n * Override the redirect URI for a single login call.\n * Useful when the same app supports multiple callback URLs per platform.\n */\n redirectUrl?: string;\n /**\n * Force the consent screen on every attempt, maps to `force_login=true`.\n */\n forceLogin?: boolean;\n}\n\nexport interface OAuth2LoginOptions {\n /**\n * The provider ID as configured in initialize()\n * This is required to identify which OAuth2 provider to use\n * @example 'github', 'azure', 'keycloak'\n */\n providerId: string;\n /**\n * Override the scopes for this login request\n * If not provided, uses the scopes from initialization\n */\n scope?: string | string[];\n /**\n * Alias for `scope` using common naming (`scopes`).\n * If both are provided, `scope` takes precedence.\n */\n scopes?: string[];\n /**\n * Custom state parameter for CSRF protection\n * If not provided, a random value is generated\n */\n state?: string;\n /**\n * Override PKCE code verifier (for testing purposes)\n * If not provided, a secure random verifier is generated\n */\n codeVerifier?: string;\n /**\n * Override redirect URL for this login request\n */\n redirectUrl?: string;\n /**\n * Additional parameters to add to the authorization URL\n */\n additionalParameters?: Record<string, string>;\n /**\n * Convenience option for OIDC `login_hint`.\n * Equivalent to passing `additionalParameters.login_hint`.\n */\n loginHint?: string;\n /**\n * Convenience option for OAuth/OIDC `prompt`.\n * Equivalent to passing `additionalParameters.prompt`.\n */\n prompt?: string;\n /**\n * Web-only (`oauth2` provider only): Use a full-page redirect instead of a popup window.\n *\n * When using `redirect`, the promise returned by `login()` will not resolve because the page navigates away.\n * After the redirect lands back in your app, call `SocialLogin.handleRedirectCallback()` on that page to\n * parse the result.\n *\n * @default 'popup'\n */\n flow?: 'popup' | 'redirect';\n}\n\nexport interface OAuth2LoginResponse {\n /**\n * The provider ID that was used for this login\n */\n providerId: string;\n /**\n * The access token received from the OAuth provider\n */\n accessToken: AccessToken | null;\n /**\n * The ID token (JWT) if provided by the OAuth server (e.g., OpenID Connect)\n */\n idToken: string | null;\n /**\n * The refresh token if provided (requires appropriate scope like offline_access)\n */\n refreshToken: string | null;\n /**\n * Resource data fetched from resourceUrl if configured\n * Contains the raw JSON response from the resource endpoint\n */\n resourceData: Record<string, unknown> | null;\n /**\n * The scopes that were granted\n */\n scope: string[];\n /**\n * Token type (usually 'bearer')\n */\n tokenType: string;\n /**\n * Token expiration time in seconds\n */\n expiresIn: number | null;\n}\n\nexport interface GoogleLoginOptions {\n /**\n * Specifies the scopes required for accessing Google APIs\n * The default is defined in the configuration.\n * @example [\"profile\", \"email\"]\n * @see [Google OAuth2 Scopes](https://developers.google.com/identity/protocols/oauth2/scopes)\n */\n scopes?: string[];\n /**\n * Nonce\n * @description nonce\n */\n nonce?: string;\n /**\n * Force refresh token (only for Android)\n * @description force refresh token\n * @default false\n * @note On Android, the OS caches access tokens, and if a token is invalid (e.g., user revoked app access), the plugin might return an invalid accessToken. Using getAuthorizationCode() is recommended to ensure the token is valid.\n */\n forceRefreshToken?: boolean;\n /**\n * Force account selection prompt (iOS)\n * @description forces the account selection prompt to appear on iOS\n * @default false\n */\n forcePrompt?: boolean;\n /**\n * Style\n * @description style\n * @default 'standard'\n */\n style?: 'bottom' | 'standard';\n /**\n * Filter by authorized accounts (Android only)\n * @description Only show accounts that have previously been used to sign in to the app.\n * This option is only available for the 'bottom' style.\n * Note: For Family Link supervised accounts, this should be set to false.\n * @default true\n */\n filterByAuthorizedAccounts?: boolean;\n /**\n * Auto select enabled (Android only)\n * @description Automatically select the account if only one Google account is available.\n * This option is only available for the 'bottom' style.\n * @default false\n */\n autoSelectEnabled?: boolean;\n /**\n * Prompt parameter for Google OAuth (Web only)\n * @description A space-delimited, case-sensitive list of prompts to present the user.\n * If you don't specify this parameter, the user will be prompted only the first time your project requests access.\n *\n * **Possible values:**\n * - `none`: Don't display any authentication or consent screens. Must not be specified with other values.\n * - `consent`: Prompt the user for consent.\n * - `select_account`: Prompt the user to select an account.\n *\n * **Examples:**\n * - `prompt: 'consent'` - Always show consent screen\n * - `prompt: 'select_account'` - Always show account selection\n * - `prompt: 'consent select_account'` - Show both consent and account selection\n *\n * **Note:** This parameter only affects web platform behavior. Mobile platforms use their own native prompts.\n *\n * @example 'consent'\n * @example 'select_account'\n * @example 'consent select_account'\n * @see [Google OAuth2 Prompt Parameter](https://developers.google.com/identity/protocols/oauth2/openid-connect#prompt)\n * @since 7.12.0\n */\n prompt?: 'none' | 'consent' | 'select_account' | 'consent select_account' | 'select_account consent';\n}\n\nexport interface GoogleLoginResponseOnline {\n accessToken: AccessToken | null;\n /**\n * OpenID Connect ID token (JWT).\n *\n * Includes an `email_verified` claim when the `email` scope is granted. Use\n * `SocialLogin.decodeIdToken({ idToken })` to read claims on the client, but\n * always verify the token signature, `iss`, `aud`, and `exp` on your backend\n * before trusting `email_verified` for account linking.\n *\n * @see https://developers.google.com/identity/gsi/web/guides/verify-google-id-token\n */\n idToken: string | null;\n profile: {\n /**\n * Email from the ID token payload. Does not include a separate verification flag;\n * check `idToken` claims (`email_verified`) for whether Google attests the address.\n */\n email: string | null;\n familyName: string | null;\n givenName: string | null;\n id: string | null;\n name: string | null;\n imageUrl: string | null;\n };\n responseType: 'online';\n}\n\nexport interface GoogleLoginResponseOffline {\n serverAuthCode: string;\n responseType: 'offline';\n}\n\nexport type GoogleLoginResponse = GoogleLoginResponseOnline | GoogleLoginResponseOffline;\n\nexport interface AppleProviderOptions {\n /**\n * Scopes\n * @description An array of scopes to request during login\n * @example [\"name\", \"email\"]\n * default: [\"name\", \"email\"]\n */\n scopes?: string[];\n /**\n * Nonce\n * @description nonce\n */\n nonce?: string;\n /**\n * State\n * @description state\n */\n state?: string;\n /**\n * Use Broadcast Channel for authentication flow\n * @description When enabled, uses Broadcast Channel API for communication instead of URL redirects.\n * Only applicable on platforms that support Broadcast Channel (Android).\n * @default false\n */\n useBroadcastChannel?: boolean;\n}\n\nexport interface AppleProviderResponse {\n /**\n * Access token from Apple\n * @description Content depends on `useProperTokenExchange` setting:\n * - When `useProperTokenExchange: true`: Real access token from Apple (~1 hour validity)\n * - When `useProperTokenExchange: false`: Contains authorization code as token (legacy mode)\n * Use `idToken` for user authentication, `accessToken` for API calls when properly exchanged.\n */\n accessToken: AccessToken | null;\n\n /**\n * Identity token (JWT) from Apple.\n *\n * Includes standard OIDC claims such as `sub`, `email` (when granted), and\n * `email_verified` (boolean). Apple sets `email_verified` to `true` when it\n * attests the user controls the email (including Hide My Email relay addresses).\n *\n * Use `SocialLogin.decodeIdToken({ idToken })` to read claims on the client, but\n * verify the token signature, `iss`, `aud`, and `exp` on your backend before\n * trusting `email_verified` for account linking.\n *\n * @see https://developer.apple.com/documentation/signinwithapple/authenticating-users-with-sign-in-with-apple\n */\n idToken: string | null;\n\n /**\n * User profile information\n * @description Basic user profile data extracted from the identity token and Apple response:\n * - `user`: Apple's user identifier (sub claim from idToken)\n * - `email`: User's email address (if permission granted)\n * - `givenName`: User's first name (if permission granted)\n * - `familyName`: User's last name (if permission granted)\n */\n profile: {\n user: string;\n email: string | null;\n givenName: string | null;\n familyName: string | null;\n };\n\n /**\n * Authorization code for proper token exchange (when useProperTokenExchange is enabled)\n * @description Only present when `useProperTokenExchange` is `true`. This code should be exchanged\n * for proper access tokens on your backend using Apple's token endpoint. Use this for secure\n * server-side token validation and to obtain refresh tokens.\n * @see https://developer.apple.com/documentation/sign_in_with_apple/tokenresponse\n */\n authorizationCode?: string;\n}\n\nexport type LoginOptions =\n | {\n provider: 'facebook';\n options: FacebookLoginOptions;\n }\n | {\n provider: 'google';\n options: GoogleLoginOptions;\n }\n | {\n provider: 'apple';\n options: AppleProviderOptions;\n }\n | {\n provider: 'twitter';\n options: TwitterLoginOptions;\n }\n | {\n provider: 'oauth2';\n options: OAuth2LoginOptions;\n };\n\nexport type LoginResult =\n | {\n provider: 'facebook';\n result: FacebookLoginResponse;\n }\n | {\n provider: 'google';\n result: GoogleLoginResponse;\n }\n | {\n provider: 'apple';\n result: AppleProviderResponse;\n }\n | {\n provider: 'twitter';\n result: TwitterLoginResponse;\n }\n | {\n provider: 'oauth2';\n result: OAuth2LoginResponse;\n };\n\nexport interface AccessToken {\n applicationId?: string;\n declinedPermissions?: string[];\n expires?: string;\n isExpired?: boolean;\n lastRefresh?: string;\n permissions?: string[];\n token: string;\n tokenType?: string;\n refreshToken?: string;\n userId?: string;\n}\n\nexport interface FacebookLoginResponse {\n accessToken: AccessToken | null;\n /**\n * Whether Facebook Limited Login was used for this session.\n * When `true`, `accessToken` is not valid for Graph API calls (Facebook error 190).\n * Validate `idToken` on your backend instead, or call `facebook#requestTracking` and log in again after ATT is granted.\n * @since 8.4.0\n */\n isLimitedLogin?: boolean;\n /**\n * OpenID Connect ID token (JWT) from Meta Limited Login (iOS native, when available).\n *\n * **Not equivalent to Google/Apple `email_verified`:** Meta's OIDC token may include\n * an `email` claim (when the `email` permission is granted) but does **not** publish an\n * `email_verified` claim like Google or Apple. Meta documents the value as the user's\n * primary account email, not as an OIDC-verified email assertion.\n *\n * On Android and Web this is usually `null` (Graph API access token flow instead).\n * Validate signature, `iss` (`https://www.facebook.com` or `https://limited.facebook.com`),\n * `aud`, `exp`, and nonce on your backend. Do not infer `email_verified: true` from the\n * presence of `email` alone when linking accounts across providers.\n *\n * @see https://developers.facebook.com/docs/facebook-login/limited-login/token/validating/\n */\n idToken: string | null;\n profile: {\n userID: string;\n /**\n * Primary email from the Meta profile / Graph API (`/me?fields=email`).\n *\n * **Not equivalent to Google/Apple `email_verified`:** this field has no verification\n * flag. Meta returns the account's primary email when the `email` permission is\n * granted; it does not expose an `email_verified` boolean comparable to Google or\n * Apple ID tokens. Treat this as an identifier hint only—verify ownership yourself\n * (e.g. magic link) before linking Meta sign-in to Google/Apple accounts by email.\n */\n email: string | null;\n friendIDs: string[];\n birthday: string | null;\n ageRange: { min?: number; max?: number } | null;\n gender: string | null;\n location: { id: string; name: string } | null;\n hometown: { id: string; name: string } | null;\n profileURL: string | null;\n name: string | null;\n imageURL: string | null;\n };\n}\n\nexport interface TwitterProfile {\n id: string;\n username: string;\n name: string | null;\n profileImageUrl: string | null;\n verified: boolean;\n email?: string | null;\n}\n\nexport interface TwitterLoginResponse {\n accessToken: AccessToken | null;\n refreshToken?: string | null;\n scope: string[];\n tokenType: 'bearer';\n expiresIn?: number | null;\n profile: TwitterProfile;\n}\n\nexport interface AuthorizationCode {\n /**\n * Jwt\n * @description A JSON web token\n */\n jwt?: string;\n /**\n * Access Token\n * @description An access token\n */\n accessToken?: string;\n}\n\nexport interface AuthorizationCodeOptions {\n /**\n * Provider\n * @description Provider for the authorization code\n */\n provider: 'apple' | 'google' | 'facebook' | 'twitter' | 'oauth2';\n /**\n * Provider ID for OAuth2 providers (required when provider is 'oauth2')\n * @description The ID used when configuring the OAuth2 provider in initialize()\n */\n providerId?: string;\n}\n\nexport interface isLoggedInOptions {\n /**\n * Provider\n * @description Provider for the isLoggedIn\n */\n provider: 'apple' | 'google' | 'facebook' | 'twitter' | 'oauth2';\n /**\n * Provider ID for OAuth2 providers (required when provider is 'oauth2')\n * @description The ID used when configuring the OAuth2 provider in initialize()\n */\n providerId?: string;\n}\n\n// Define the provider-specific call types\nexport type ProviderSpecificCall = 'facebook#getProfile' | 'facebook#requestTracking';\n\n// Define the options and response types for each specific call\nexport interface FacebookGetProfileOptions {\n /**\n * Fields to retrieve from Facebook profile\n * @example [\"id\", \"name\", \"email\", \"picture\"]\n */\n fields?: string[];\n}\n\nexport interface FacebookGetProfileResponse {\n /**\n * Facebook profile data\n */\n profile: {\n id: string | null;\n name: string | null;\n email: string | null;\n first_name: string | null;\n last_name: string | null;\n picture?: {\n data: {\n height: number | null;\n is_silhouette: boolean | null;\n url: string | null;\n width: number | null;\n };\n } | null;\n [key: string]: any; // For additional fields that might be requested\n };\n}\n\nexport interface OpenSecureWindowOptions {\n /**\n * The endpoint to open\n */\n authEndpoint: string;\n /**\n * The redirect URI to use for the openSecureWindow call.\n * This will be checked to make sure it matches the redirect URI after the window finishes the redirection.\n */\n redirectUri: string;\n /**\n * The name of the broadcast channel to listen to, relevant only for web\n */\n broadcastChannelName?: string;\n}\n\nexport interface OpenSecureWindowResponse {\n /**\n * The result of the openSecureWindow call\n */\n redirectedUri: string;\n}\n\nexport type FacebookRequestTrackingOptions = Record<string, never>;\n\nexport interface FacebookRequestTrackingResponse {\n /**\n * App tracking authorization status\n */\n status: 'authorized' | 'denied' | 'notDetermined' | 'restricted';\n}\n\n// Map call strings to their options and response types\nexport type ProviderSpecificCallOptionsMap = {\n 'facebook#getProfile': FacebookGetProfileOptions;\n 'facebook#requestTracking': FacebookRequestTrackingOptions;\n};\n\nexport type ProviderSpecificCallResponseMap = {\n 'facebook#getProfile': FacebookGetProfileResponse;\n 'facebook#requestTracking': FacebookRequestTrackingResponse;\n};\n\n// Add a helper type to map providers to their response types\nexport type ProviderResponseMap = {\n facebook: FacebookLoginResponse;\n google: GoogleLoginResponse;\n apple: AppleProviderResponse;\n twitter: TwitterLoginResponse;\n oauth2: OAuth2LoginResponse;\n};\n\n/**\n * Error codes returned by the plugin.\n * @since 8.3.x\n */\nexport type SocialLoginErrorCode = 'USER_CANCELLED';\n\n/**\n * Errors thrown by SocialLogin methods.\n *\n * When a user dismisses or cancels the provider UI (popup closed, system dialog cancelled, access denied, etc.),\n * the plugin rejects with `code === 'USER_CANCELLED'` so the caller can distinguish user intent from real failures.\n * Other errors may omit the code or use provider-specific values.\n */\nexport interface SocialLoginError extends Error {\n code?: SocialLoginErrorCode | string;\n}\n\nexport interface SocialLoginPlugin {\n /**\n * Initialize the plugin\n * @description initialize the plugin with the required options\n */\n initialize(options: InitializeOptions): Promise<void>;\n /**\n * Login with the selected provider\n * @description login with the selected provider\n *\n * On user dismissal/cancellation, the Promise is rejected with `code === 'USER_CANCELLED'` (see `SocialLoginError`).\n */\n login<T extends LoginOptions['provider']>(\n options: Extract<LoginOptions, { provider: T }>,\n ): Promise<{ provider: T; result: ProviderResponseMap[T] }>;\n /**\n * Logout\n * @description Logout the user from the specified provider\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * It will reject with error: \"logout is not implemented when using offline mode\"\n *\n * @throws Error if Google provider is in offline mode\n */\n logout(options: {\n provider: 'apple' | 'google' | 'facebook' | 'twitter' | 'oauth2';\n providerId?: string;\n }): Promise<void>;\n /**\n * IsLoggedIn\n * @description Check if the user is currently logged in with the specified provider\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * It will reject with error: \"isLoggedIn is not implemented when using offline mode\"\n *\n * @throws Error if Google provider is in offline mode\n */\n isLoggedIn(options: isLoggedInOptions): Promise<{ isLoggedIn: boolean }>;\n\n /**\n * Get the current authorization code\n * @description Get the authorization code for server-side authentication\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * It will reject with error: \"getAuthorizationCode is not implemented when using offline mode\"\n *\n * In offline mode, the authorization code (serverAuthCode) is already returned by the `login()` method.\n *\n * @throws Error if Google provider is in offline mode\n */\n getAuthorizationCode(options: AuthorizationCodeOptions): Promise<AuthorizationCode>;\n /**\n * Refresh the access token\n * @description refresh the access token\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * Offline mode only returns `serverAuthCode` for backend token exchange, so token refresh must happen on your backend.\n * The plugin logs and rejects with a message explaining that you should send `serverAuthCode` to your backend,\n * refresh the Google tokens there, or switch to `mode: 'online'` for client-side refresh.\n *\n * **Google Web Limitation:**\n * On Web, Google `refresh()` is not implemented, even when using `mode: 'online'`.\n * Call `login()` again on Web to obtain a fresh token instead.\n *\n * @throws Error if Google provider is in offline mode, or on Web where Google `refresh()` is not implemented\n */\n refresh(options: LoginOptions): Promise<void>;\n\n /**\n * OAuth2 refresh-token helper (feature parity with Capawesome OAuth).\n *\n * Scope:\n * - Only applies to the built-in `oauth2` provider (not Google/Apple/Facebook/Twitter).\n * - Requires a token endpoint (either `accessTokenEndpoint`/`tokenEndpoint` or `issuerUrl` discovery).\n *\n * Security note:\n * - This does not validate JWT signatures. It only exchanges/refreshes tokens.\n *\n * If `refreshToken` is omitted, the plugin will attempt to use the stored refresh token (if available).\n */\n refreshToken(options: {\n provider: 'oauth2';\n providerId: string;\n refreshToken?: string;\n additionalParameters?: Record<string, string>;\n }): Promise<OAuth2LoginResponse>;\n\n /**\n * Web-only: handle the OAuth redirect callback and return the parsed result.\n *\n * Notes:\n * - This is only meaningful on Web. iOS/Android implementations will reject.\n * - Intended for redirect-based flows (e.g. `oauth2` with `flow: 'redirect'`) where the page navigates away.\n */\n handleRedirectCallback(): Promise<LoginResult | null>;\n\n /**\n * Decode a JWT (typically an OIDC ID token) into its claims.\n *\n * Notes:\n * - Accepts both `idToken` and `token` to match common naming (Capawesome uses `token`).\n * - This does not validate the signature or issuer/audience. It only base64url-decodes the payload.\n *\n * **`email_verified` semantics by provider (for account linking):**\n * - **Google** — ID token includes `email_verified` (boolean). When `true`, Google attests\n * the user controls that email. Verify the JWT on your backend before trusting it.\n * - **Apple** — ID token includes `email_verified` (boolean). When `true`, Apple attests\n * the user controls that email (including private relay). Verify the JWT on your backend.\n * - **Meta (Facebook)** — Limited Login OIDC tokens may include `email` but **do not**\n * include `email_verified`. The presence of `email` is not the same guarantee as\n * `email_verified: true` from Google or Apple. Do not link accounts by email across\n * providers using Meta claims alone; perform your own email verification if needed.\n */\n decodeIdToken(options: { idToken?: string; token?: string }): Promise<{ claims: Record<string, any> }>;\n\n /**\n * Convert an access token expiration timestamp (milliseconds since epoch) to an ISO date string.\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n getAccessTokenExpirationDate(options: {\n /**\n * Access token expiration date in milliseconds since epoch.\n * Typically: `Date.now() + expiresInSeconds * 1000`.\n */\n accessTokenExpirationDate: number;\n }): Promise<{ date: string }>;\n\n /**\n * Check if an access token is available (non-empty).\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n isAccessTokenAvailable(options: { accessToken: string | null }): Promise<{ isAvailable: boolean }>;\n\n /**\n * Check if an access token is expired.\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n isAccessTokenExpired(options: { accessTokenExpirationDate: number }): Promise<{ isExpired: boolean }>;\n\n /**\n * Check if a refresh token is available (non-empty).\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n isRefreshTokenAvailable(options: { refreshToken: string | null }): Promise<{ isAvailable: boolean }>;\n\n /**\n * Execute provider-specific calls\n * @description Execute a provider-specific functionality\n */\n providerSpecificCall<T extends ProviderSpecificCall>(options: {\n call: T;\n options: ProviderSpecificCallOptionsMap[T];\n }): Promise<ProviderSpecificCallResponseMap[T]>;\n\n /**\n * Get the native Capacitor plugin version\n *\n * @returns {Promise<{ id: string }>} an Promise with version for this device\n * @throws An error if the something went wrong\n */\n getPluginVersion(): Promise<{ version: string }>;\n\n /**\n * Opens a secured window for OAuth2 authentication.\n * For web, you should have the code in the redirected page to use a broadcast channel to send the redirected url to the app\n * Something like:\n * ```html\n * <html>\n * <head></head>\n * <body>\n * <script>\n * const searchParams = new URLSearchParams(location.search)\n * if (searchParams.has(\"code\")) {\n * new BroadcastChannel(\"my-channel-name\").postMessage(location.href);\n * window.close();\n * }\n * </script>\n * </body>\n * </html>\n * ```\n * For mobile, you should have a redirect uri that opens the app, something like: `myapp://oauth_callback/`\n * And make sure to register it in the app's info.plist:\n * ```xml\n * <key>CFBundleURLTypes</key>\n * <array>\n * <dict>\n * <key>CFBundleURLSchemes</key>\n * <array>\n * <string>myapp</string>\n * </array>\n * </dict>\n * </array>\n * ```\n * And in the AndroidManifest.xml file:\n * ```xml\n * <activity>\n * <intent-filter>\n * <action android:name=\"android.intent.action.VIEW\" />\n * <category android:name=\"android.intent.category.DEFAULT\" />\n * <category android:name=\"android.intent.category.BROWSABLE\" />\n * <data android:host=\"oauth_callback\" android:scheme=\"myapp\" />\n * </intent-filter>\n * </activity>\n * ```\n * @param options - the options for the openSecureWindow call\n */\n openSecureWindow(options: OpenSecureWindowOptions): Promise<OpenSecureWindowResponse>;\n}\n"]}
1
+ {"version":3,"file":"definitions.js","sourceRoot":"","sources":["../../src/definitions.ts"],"names":[],"mappings":"","sourcesContent":["/**\n * Configuration for a single OAuth2 provider instance\n */\nexport interface OAuth2ProviderConfig {\n /**\n * The OAuth 2.0 client identifier (App ID / Client ID).\n *\n * Note: this configuration object is only used by the plugin's built-in `oauth2` provider\n * (i.e. `SocialLogin.initialize({ oauth2: { ... } })`). It does not affect Google/Apple/Facebook/Twitter.\n * @example 'your-client-id'\n */\n appId?: string;\n /**\n * Alias for `appId` to match common OAuth/OIDC naming (`clientId`).\n * If both are provided, `appId` takes precedence.\n * @example 'your-client-id'\n */\n clientId?: string;\n /**\n * OpenID Connect issuer URL (enables discovery via `/.well-known/openid-configuration`).\n * When set, you may omit explicit endpoints like `authorizationBaseUrl` and `accessTokenEndpoint`.\n *\n * Notes:\n * - Explicit endpoints (authorization/token/logout) take precedence over discovered values.\n * - Discovery is supported for `oauth2` on Web, iOS, and Android.\n *\n * @example 'https://accounts.example.com'\n */\n issuerUrl?: string;\n /**\n * The base URL of the authorization endpoint\n * @example 'https://accounts.example.com/oauth2/authorize'\n */\n authorizationBaseUrl?: string;\n /**\n * Alias for `authorizationBaseUrl` (to match common OAuth/OIDC naming).\n * @example 'https://accounts.example.com/oauth2/authorize'\n */\n authorizationEndpoint?: string;\n /**\n * OAuth 2.0 client secret for token requests (e.g., when exchanging the code).\n * This value is sent as `client_secret` in token/refresh requests when provided.\n */\n clientSecret?: string;\n /**\n * The URL to exchange the authorization code for tokens\n * Required for authorization code flow\n * @example 'https://accounts.example.com/oauth2/token'\n */\n accessTokenEndpoint?: string;\n /**\n * Alias for `accessTokenEndpoint` (to match common OAuth/OIDC naming).\n * @example 'https://accounts.example.com/oauth2/token'\n */\n tokenEndpoint?: string;\n /**\n * Redirect URL that receives the OAuth callback\n * @example 'myapp://oauth/callback'\n */\n redirectUrl: string;\n /**\n * Optional URL to fetch user profile/resource data after authentication\n * The access token will be sent as Bearer token in the Authorization header\n * @example 'https://api.example.com/userinfo'\n */\n resourceUrl?: string;\n /**\n * The OAuth response type\n * - 'code': Authorization Code flow (recommended, requires accessTokenEndpoint)\n * - 'token': Implicit flow (less secure, tokens returned directly)\n * @default 'code'\n */\n responseType?: 'code' | 'token';\n /**\n * Enable PKCE (Proof Key for Code Exchange)\n * Strongly recommended for public clients (mobile/web apps)\n * @default true\n */\n pkceEnabled?: boolean;\n /**\n * Default scopes to request during authorization\n * @example 'openid profile email'\n * @example ['openid','profile','email']\n */\n scope?: string | string[];\n /**\n * Alias for `scope` using common naming (`scopes`).\n * If both are provided, `scope` takes precedence.\n */\n scopes?: string[];\n /**\n * Additional parameters to include in the authorization request\n * @example { prompt: 'consent', login_hint: 'user@example.com' }\n */\n additionalParameters?: Record<string, string>;\n /**\n * Convenience option for OIDC `login_hint`.\n * Equivalent to passing `additionalParameters.login_hint`.\n */\n loginHint?: string;\n /**\n * Convenience option for OAuth/OIDC `prompt`.\n * Equivalent to passing `additionalParameters.prompt`.\n */\n prompt?: string;\n /**\n * Additional parameters to include in token requests (code exchange / refresh).\n * Useful for providers that require non-standard parameters.\n */\n additionalTokenParameters?: Record<string, string>;\n /**\n * Additional headers to include when fetching the resource URL\n * @example { 'X-Custom-Header': 'value' }\n */\n additionalResourceHeaders?: Record<string, string>;\n /**\n * Custom logout URL for ending the session\n * @example 'https://accounts.example.com/logout'\n */\n logoutUrl?: string;\n /**\n * Alias for `logoutUrl` to match OIDC naming (`endSessionEndpoint`).\n * @example 'https://accounts.example.com/logout'\n */\n endSessionEndpoint?: string;\n /**\n * OIDC post logout redirect URL (sent as `post_logout_redirect_uri` when building the end-session URL).\n * @example 'myapp://logout/callback'\n */\n postLogoutRedirectUrl?: string;\n /**\n * Additional parameters to include in logout / end-session URL.\n */\n additionalLogoutParameters?: Record<string, string>;\n /**\n * iOS-only: Whether to prefer an ephemeral browser session for ASWebAuthenticationSession.\n * Defaults to true to match existing behavior in this plugin.\n */\n iosPrefersEphemeralWebBrowserSession?: boolean;\n /**\n * Alias for `iosPrefersEphemeralWebBrowserSession` (to match Capawesome OAuth naming).\n */\n iosPrefersEphemeralSession?: boolean;\n /**\n * Enable debug logging\n * @default false\n */\n logsEnabled?: boolean;\n}\n\nexport interface InitializeOptions {\n /**\n * OAuth2 provider configurations.\n * Supports multiple providers by using a Record with provider IDs as keys.\n * @example\n * {\n * github: { appId: '...', authorizationBaseUrl: 'https://github.com/login/oauth/authorize', ... },\n * azure: { appId: '...', authorizationBaseUrl: 'https://login.microsoftonline.com/.../oauth2/v2.0/authorize', ... }\n * }\n */\n oauth2?: Record<string, OAuth2ProviderConfig>;\n twitter?: {\n /**\n * The OAuth 2.0 client identifier issued by X (Twitter) Developer Portal\n * @example 'Y2xpZW50SWQ'\n */\n clientId: string;\n /**\n * Redirect URL that is registered inside the X Developer Portal.\n * The plugin uses this URL on every platform to receive the authorization code.\n * @example 'myapp://auth/x'\n */\n redirectUrl: string;\n /**\n * Default scopes appended to every login request when no custom scopes are provided.\n * @description Defaults to the minimum required scopes for Log in with X.\n * @default ['tweet.read','users.read']\n */\n defaultScopes?: string[];\n /**\n * Force the consent screen to show on every login attempt.\n * Mirrors X's `force_login=true` flag.\n * @default false\n */\n forceLogin?: boolean;\n /**\n * Optional audience value when your application has been approved for multi-tenant access.\n */\n audience?: string;\n };\n facebook?: {\n /**\n * Facebook App ID, provided by Facebook for web, in mobile it's set in the native files\n * @description For business integrations, use your Business App ID from Facebook Developer Console.\n * Business apps can access additional permissions like Instagram API, Pages API, and business management features.\n * @see docs/facebook_business_login.md for business app setup guide\n */\n appId: string;\n /**\n * Facebook Client Token, provided by Facebook for web, in mobile it's set in the native files\n */\n clientToken?: string;\n /**\n * Locale\n * @description The locale to use for the Facebook SDK (e.g., 'en_US', 'fr_FR', 'es_ES')\n * @default 'en_US'\n * @example 'fr_FR'\n */\n locale?: string;\n };\n\n google?: {\n /**\n * The app's client ID, found and created in the Google Developers Console.\n * Required for iOS platform.\n * @example xxxxxx-xxxxxxxxxxxxxxxxxx.apps.googleusercontent.com\n * @since 3.1.0\n */\n iOSClientId?: string;\n /**\n * The app's server client ID, required for offline mode on iOS.\n * Should be the same value as webClientId.\n * Found and created in the Google Developers Console.\n * @example xxxxxx-xxxxxxxxxxxxxxxxxx.apps.googleusercontent.com\n * @since 3.1.0\n */\n iOSServerClientId?: string;\n /**\n * The app's web client ID, found and created in the Google Developers Console.\n * Required for Android and Web platforms.\n * @example xxxxxx-xxxxxxxxxxxxxxxxxx.apps.googleusercontent.com\n * @since 3.1.0\n */\n webClientId?: string;\n /**\n * The login mode, can be online or offline.\n *\n * **Online mode (default):**\n * - Returns user profile data and access tokens\n * - Supports all methods: login, logout, isLoggedIn, getAuthorizationCode\n *\n * **Offline mode:**\n * - Returns only serverAuthCode for backend authentication\n * - No user profile data available\n * - **Limitations:** The following methods are NOT supported in offline mode:\n * - `logout()` - Will reject with \"not implemented when using offline mode\"\n * - `isLoggedIn()` - Will reject with \"not implemented when using offline mode\"\n * - `getAuthorizationCode()` - Will reject with \"not implemented when using offline mode\"\n * - `refresh()` - Will reject because offline mode only returns `serverAuthCode`; token refresh must happen on your backend\n * - Only `login()` method works in offline mode, returning serverAuthCode only\n * - `serverAuthCode` must be exchanged on your backend for access/refresh tokens\n * - Requires `iOSServerClientId` to be set on iOS\n *\n * @example 'offline'\n * @default 'online'\n * @since 3.1.0\n */\n mode?: 'online' | 'offline';\n /**\n * Filter visible accounts by hosted domain\n * @description filter visible accounts by hosted domain\n */\n hostedDomain?: string;\n /**\n * Google Redirect URL, should be your backend url that is configured in your google app\n */\n redirectUrl?: string;\n };\n apple?: {\n /**\n * Apple Client ID, provided by Apple for web and Android\n */\n clientId?: string;\n /**\n * Apple Redirect URL, should be your backend url that is configured in your apple app\n *\n * **Note**: Use empty string `''` for iOS to prevent redirect.\n * **Note**: Not required when using Broadcast Channel mode on Android.\n */\n redirectUrl?: string;\n /**\n * Use proper token exchange for Apple Sign-In\n * @description Controls how Apple Sign-In tokens are handled and what gets returned:\n *\n * **When `true` (Recommended for new implementations):**\n * - Exchanges authorization code for proper access tokens via Apple's token endpoint\n * - `idToken`: JWT containing user identity information (email, name, user ID)\n * - `accessToken.token`: Proper access token from Apple (short-lived, ~1 hour)\n * - `authorizationCode`: Raw authorization code for backend token exchange\n *\n * **When `false` (Default - Legacy mode):**\n * - Uses authorization code directly as access token for backward compatibility\n * - `idToken`: JWT containing user identity information (email, name, user ID)\n * - `accessToken.token`: The authorization code itself (not a real access token)\n * - `authorizationCode`: undefined\n *\n * @default false\n * @example\n * // Enable proper token exchange (recommended)\n * useProperTokenExchange: true\n * // Result: idToken=JWT, accessToken=real_token, authorizationCode=present\n *\n * // Legacy mode (backward compatibility)\n * useProperTokenExchange: false\n * // Result: idToken=JWT, accessToken=auth_code, authorizationCode=undefined\n */\n useProperTokenExchange?: boolean;\n /**\n * Use Broadcast Channel for Android Apple Sign-In (Recommended)\n * @description When enabled, Android uses Broadcast Channel API instead of URL redirects.\n * This eliminates the need for redirect URL configuration and server-side setup.\n *\n * **Benefits:**\n * - No redirect URL configuration required\n * - No backend server needed for Android\n * - Simpler setup and more reliable communication\n * - Direct client-server communication via Broadcast Channel\n *\n * **When `true`:**\n * - Uses Broadcast Channel for authentication flow\n * - `redirectUrl` is ignored\n * - Requires Broadcast Channel compatible backend or direct token handling\n *\n * **When `false` (Default - Legacy mode):**\n * - Uses traditional URL redirect flow\n * - Requires `redirectUrl` configuration\n * - Requires backend server for token exchange\n *\n * @default false\n * @since 7.10.0\n * @example\n * // Enable Broadcast Channel mode (recommended for new Android implementations)\n * useBroadcastChannel: true\n * // Result: Simplified setup, no redirect URL needed\n *\n * // Legacy mode (backward compatibility)\n * useBroadcastChannel: false\n * // Result: Traditional URL redirect flow with server-side setup\n */\n useBroadcastChannel?: boolean;\n };\n}\n\nexport interface FacebookLoginOptions {\n /**\n * Permissions\n * @description Select permissions to login with. Supports both consumer and business permissions.\n *\n * **Consumer Permissions:**\n * - `email` - User's email address\n * - `public_profile` - User's public profile info\n * - `user_friends` - List of friends who also use your app\n *\n * **Business Permissions** (require business app configuration and may need App Review):\n * - `instagram_basic` - Instagram Basic Display API access\n * - `instagram_manage_insights` - Instagram Insights data\n * - `instagram_manage_comments` - Manage Instagram comments\n * - `instagram_content_publish` - Publish to Instagram\n * - `pages_show_list` - List of Pages managed by user\n * - `pages_read_engagement` - Read Page engagement metrics\n * - `pages_manage_posts` - Manage Page posts\n * - `pages_messaging` - Page messaging features\n * - `business_management` - Manage business assets\n * - `catalog_management` - Manage product catalogs\n * - `ads_management` - Manage advertising accounts\n *\n * @example ['email', 'public_profile'] // Consumer permissions\n * @example ['email', 'instagram_basic', 'pages_show_list'] // Business permissions\n * @see https://developers.facebook.com/docs/permissions/reference\n * @see docs/facebook_business_login.md for complete business integration guide\n */\n permissions: string[];\n /**\n * Is Limited Login\n * @description use limited login for Facebook iOS only. Important: This is iOS-only and doesn't affect Android.\n * Even if set to false, Facebook will automatically force it to true if App Tracking Transparency (ATT) permission is not granted.\n * Developers should always be prepared to handle both limited and full login scenarios.\n * @default false\n */\n limitedLogin?: boolean;\n /**\n * Nonce\n * @description A custom nonce to use for the login request\n */\n nonce?: string;\n}\n\nexport interface TwitterLoginOptions {\n /**\n * Additional scopes to request during login.\n * If omitted the plugin falls back to the default scopes configured during initialization.\n * @example ['tweet.read','users.read','offline.access']\n */\n scopes?: string[];\n /**\n * Provide a custom OAuth state value.\n * When not provided the plugin generates a cryptographically random value.\n */\n state?: string;\n /**\n * Provide a pre-computed PKCE code verifier (mostly used for testing).\n * When omitted the plugin generates a secure verifier automatically.\n */\n codeVerifier?: string;\n /**\n * Override the redirect URI for a single login call.\n * Useful when the same app supports multiple callback URLs per platform.\n */\n redirectUrl?: string;\n /**\n * Force the consent screen on every attempt, maps to `force_login=true`.\n */\n forceLogin?: boolean;\n}\n\nexport interface OAuth2LoginOptions {\n /**\n * The provider ID as configured in initialize()\n * This is required to identify which OAuth2 provider to use\n * @example 'github', 'azure', 'keycloak'\n */\n providerId: string;\n /**\n * Override the scopes for this login request\n * If not provided, uses the scopes from initialization\n */\n scope?: string | string[];\n /**\n * Alias for `scope` using common naming (`scopes`).\n * If both are provided, `scope` takes precedence.\n */\n scopes?: string[];\n /**\n * Custom state parameter for CSRF protection\n * If not provided, a random value is generated\n */\n state?: string;\n /**\n * Override PKCE code verifier (for testing purposes)\n * If not provided, a secure random verifier is generated\n */\n codeVerifier?: string;\n /**\n * Override redirect URL for this login request\n */\n redirectUrl?: string;\n /**\n * Additional parameters to add to the authorization URL\n */\n additionalParameters?: Record<string, string>;\n /**\n * Convenience option for OIDC `login_hint`.\n * Equivalent to passing `additionalParameters.login_hint`.\n */\n loginHint?: string;\n /**\n * Convenience option for OAuth/OIDC `prompt`.\n * Equivalent to passing `additionalParameters.prompt`.\n */\n prompt?: string;\n /**\n * Web-only (`oauth2` provider only): Use a full-page redirect instead of a popup window.\n *\n * When using `redirect`, the promise returned by `login()` will not resolve because the page navigates away.\n * After the redirect lands back in your app, call `SocialLogin.handleRedirectCallback()` on that page to\n * parse the result.\n *\n * @default 'popup'\n */\n flow?: 'popup' | 'redirect';\n}\n\nexport interface OAuth2LoginResponse {\n /**\n * The provider ID that was used for this login\n */\n providerId: string;\n /**\n * The access token received from the OAuth provider\n */\n accessToken: AccessToken | null;\n /**\n * The ID token (JWT) if provided by the OAuth server (e.g., OpenID Connect)\n */\n idToken: string | null;\n /**\n * The refresh token if provided (requires appropriate scope like offline_access)\n */\n refreshToken: string | null;\n /**\n * Resource data fetched from resourceUrl if configured\n * Contains the raw JSON response from the resource endpoint\n */\n resourceData: Record<string, unknown> | null;\n /**\n * The scopes that were granted\n */\n scope: string[];\n /**\n * Token type (usually 'bearer')\n */\n tokenType: string;\n /**\n * Token expiration time in seconds\n */\n expiresIn: number | null;\n}\n\nexport interface GoogleLoginOptions {\n /**\n * Specifies the scopes required for accessing Google APIs\n * The default is defined in the configuration.\n * @example [\"profile\", \"email\"]\n * @see [Google OAuth2 Scopes](https://developers.google.com/identity/protocols/oauth2/scopes)\n */\n scopes?: string[];\n /**\n * Nonce\n * @description nonce\n */\n nonce?: string;\n /**\n * Force refresh token (only for Android)\n * @description force refresh token\n * @default false\n * @note On Android, the OS caches access tokens, and if a token is invalid (e.g., user revoked app access), the plugin might return an invalid accessToken. Using getAuthorizationCode() is recommended to ensure the token is valid.\n */\n forceRefreshToken?: boolean;\n /**\n * Force account selection prompt (iOS)\n * @description forces the account selection prompt to appear on iOS\n * @default false\n */\n forcePrompt?: boolean;\n /**\n * Style\n * @description style\n * @default 'standard'\n */\n style?: 'bottom' | 'standard';\n /**\n * Filter by authorized accounts (Android only)\n * @description Only show accounts that have previously been used to sign in to the app.\n * This option is only available for the 'bottom' style.\n * Note: For Family Link supervised accounts, this should be set to false.\n * @default false\n */\n filterByAuthorizedAccounts?: boolean;\n /**\n * Auto select enabled (Android only)\n * @description Automatically select the account if only one Google account is available.\n * This option is only available for the 'bottom' style.\n * @default false\n */\n autoSelectEnabled?: boolean;\n /**\n * Prompt parameter for Google OAuth (Web only)\n * @description A space-delimited, case-sensitive list of prompts to present the user.\n * If you don't specify this parameter, the user will be prompted only the first time your project requests access.\n *\n * **Possible values:**\n * - `none`: Don't display any authentication or consent screens. Must not be specified with other values.\n * - `consent`: Prompt the user for consent.\n * - `select_account`: Prompt the user to select an account.\n *\n * **Examples:**\n * - `prompt: 'consent'` - Always show consent screen\n * - `prompt: 'select_account'` - Always show account selection\n * - `prompt: 'consent select_account'` - Show both consent and account selection\n *\n * **Note:** This parameter only affects web platform behavior. Mobile platforms use their own native prompts.\n *\n * @example 'consent'\n * @example 'select_account'\n * @example 'consent select_account'\n * @see [Google OAuth2 Prompt Parameter](https://developers.google.com/identity/protocols/oauth2/openid-connect#prompt)\n * @since 7.12.0\n */\n prompt?: 'none' | 'consent' | 'select_account' | 'consent select_account' | 'select_account consent';\n}\n\nexport interface GoogleLoginResponseOnline {\n accessToken: AccessToken | null;\n /**\n * OpenID Connect ID token (JWT).\n *\n * Includes an `email_verified` claim when the `email` scope is granted. Use\n * `SocialLogin.decodeIdToken({ idToken })` to read claims on the client, but\n * always verify the token signature, `iss`, `aud`, and `exp` on your backend\n * before trusting `email_verified` for account linking.\n *\n * @see https://developers.google.com/identity/gsi/web/guides/verify-google-id-token\n */\n idToken: string | null;\n profile: {\n /**\n * Email from the ID token payload. Does not include a separate verification flag;\n * check `idToken` claims (`email_verified`) for whether Google attests the address.\n */\n email: string | null;\n familyName: string | null;\n givenName: string | null;\n id: string | null;\n name: string | null;\n imageUrl: string | null;\n };\n responseType: 'online';\n}\n\nexport interface GoogleLoginResponseOffline {\n serverAuthCode: string;\n responseType: 'offline';\n}\n\nexport type GoogleLoginResponse = GoogleLoginResponseOnline | GoogleLoginResponseOffline;\n\nexport interface AppleProviderOptions {\n /**\n * Scopes\n * @description An array of scopes to request during login\n * @example [\"name\", \"email\"]\n * default: [\"name\", \"email\"]\n */\n scopes?: string[];\n /**\n * Nonce\n * @description nonce\n */\n nonce?: string;\n /**\n * State\n * @description state\n */\n state?: string;\n /**\n * Use Broadcast Channel for authentication flow\n * @description When enabled, uses Broadcast Channel API for communication instead of URL redirects.\n * Only applicable on platforms that support Broadcast Channel (Android).\n * @default false\n */\n useBroadcastChannel?: boolean;\n}\n\nexport interface AppleProviderResponse {\n /**\n * Access token from Apple\n * @description Content depends on `useProperTokenExchange` setting:\n * - When `useProperTokenExchange: true`: Real access token from Apple (~1 hour validity)\n * - When `useProperTokenExchange: false`: Contains authorization code as token (legacy mode)\n * Use `idToken` for user authentication, `accessToken` for API calls when properly exchanged.\n */\n accessToken: AccessToken | null;\n\n /**\n * Identity token (JWT) from Apple.\n *\n * Includes standard OIDC claims such as `sub`, `email` (when granted), and\n * `email_verified` (boolean). Apple sets `email_verified` to `true` when it\n * attests the user controls the email (including Hide My Email relay addresses).\n *\n * Use `SocialLogin.decodeIdToken({ idToken })` to read claims on the client, but\n * verify the token signature, `iss`, `aud`, and `exp` on your backend before\n * trusting `email_verified` for account linking.\n *\n * @see https://developer.apple.com/documentation/signinwithapple/authenticating-users-with-sign-in-with-apple\n */\n idToken: string | null;\n\n /**\n * User profile information\n * @description Basic user profile data extracted from the identity token and Apple response:\n * - `user`: Apple's user identifier (sub claim from idToken)\n * - `email`: User's email address (if permission granted)\n * - `givenName`: User's first name (if permission granted)\n * - `familyName`: User's last name (if permission granted)\n */\n profile: {\n user: string;\n email: string | null;\n givenName: string | null;\n familyName: string | null;\n };\n\n /**\n * Authorization code for proper token exchange (when useProperTokenExchange is enabled)\n * @description Only present when `useProperTokenExchange` is `true`. This code should be exchanged\n * for proper access tokens on your backend using Apple's token endpoint. Use this for secure\n * server-side token validation and to obtain refresh tokens.\n * @see https://developer.apple.com/documentation/sign_in_with_apple/tokenresponse\n */\n authorizationCode?: string;\n}\n\nexport type LoginOptions =\n | {\n provider: 'facebook';\n options: FacebookLoginOptions;\n }\n | {\n provider: 'google';\n options: GoogleLoginOptions;\n }\n | {\n provider: 'apple';\n options: AppleProviderOptions;\n }\n | {\n provider: 'twitter';\n options: TwitterLoginOptions;\n }\n | {\n provider: 'oauth2';\n options: OAuth2LoginOptions;\n };\n\nexport type LoginResult =\n | {\n provider: 'facebook';\n result: FacebookLoginResponse;\n }\n | {\n provider: 'google';\n result: GoogleLoginResponse;\n }\n | {\n provider: 'apple';\n result: AppleProviderResponse;\n }\n | {\n provider: 'twitter';\n result: TwitterLoginResponse;\n }\n | {\n provider: 'oauth2';\n result: OAuth2LoginResponse;\n };\n\nexport interface AccessToken {\n applicationId?: string;\n declinedPermissions?: string[];\n expires?: string;\n isExpired?: boolean;\n lastRefresh?: string;\n permissions?: string[];\n token: string;\n tokenType?: string;\n refreshToken?: string;\n userId?: string;\n}\n\nexport interface FacebookLoginResponse {\n accessToken: AccessToken | null;\n /**\n * Whether Facebook Limited Login was used for this session.\n * When `true`, `accessToken` is not valid for Graph API calls (Facebook error 190).\n * Validate `idToken` on your backend instead, or call `facebook#requestTracking` and log in again after ATT is granted.\n * @since 8.4.0\n */\n isLimitedLogin?: boolean;\n /**\n * OpenID Connect ID token (JWT) from Meta Limited Login (iOS native, when available).\n *\n * **Not equivalent to Google/Apple `email_verified`:** Meta's OIDC token may include\n * an `email` claim (when the `email` permission is granted) but does **not** publish an\n * `email_verified` claim like Google or Apple. Meta documents the value as the user's\n * primary account email, not as an OIDC-verified email assertion.\n *\n * On Android and Web this is usually `null` (Graph API access token flow instead).\n * Validate signature, `iss` (`https://www.facebook.com` or `https://limited.facebook.com`),\n * `aud`, `exp`, and nonce on your backend. Do not infer `email_verified: true` from the\n * presence of `email` alone when linking accounts across providers.\n *\n * @see https://developers.facebook.com/docs/facebook-login/limited-login/token/validating/\n */\n idToken: string | null;\n profile: {\n userID: string;\n /**\n * Primary email from the Meta profile / Graph API (`/me?fields=email`).\n *\n * **Not equivalent to Google/Apple `email_verified`:** this field has no verification\n * flag. Meta returns the account's primary email when the `email` permission is\n * granted; it does not expose an `email_verified` boolean comparable to Google or\n * Apple ID tokens. Treat this as an identifier hint only—verify ownership yourself\n * (e.g. magic link) before linking Meta sign-in to Google/Apple accounts by email.\n */\n email: string | null;\n friendIDs: string[];\n birthday: string | null;\n ageRange: { min?: number; max?: number } | null;\n gender: string | null;\n location: { id: string; name: string } | null;\n hometown: { id: string; name: string } | null;\n profileURL: string | null;\n name: string | null;\n imageURL: string | null;\n };\n}\n\nexport interface TwitterProfile {\n id: string;\n username: string;\n name: string | null;\n profileImageUrl: string | null;\n verified: boolean;\n email?: string | null;\n}\n\nexport interface TwitterLoginResponse {\n accessToken: AccessToken | null;\n refreshToken?: string | null;\n scope: string[];\n tokenType: 'bearer';\n expiresIn?: number | null;\n profile: TwitterProfile;\n}\n\nexport interface AuthorizationCode {\n /**\n * Jwt\n * @description A JSON web token\n */\n jwt?: string;\n /**\n * Access Token\n * @description An access token\n */\n accessToken?: string;\n}\n\nexport interface AuthorizationCodeOptions {\n /**\n * Provider\n * @description Provider for the authorization code\n */\n provider: 'apple' | 'google' | 'facebook' | 'twitter' | 'oauth2';\n /**\n * Provider ID for OAuth2 providers (required when provider is 'oauth2')\n * @description The ID used when configuring the OAuth2 provider in initialize()\n */\n providerId?: string;\n}\n\nexport interface isLoggedInOptions {\n /**\n * Provider\n * @description Provider for the isLoggedIn\n */\n provider: 'apple' | 'google' | 'facebook' | 'twitter' | 'oauth2';\n /**\n * Provider ID for OAuth2 providers (required when provider is 'oauth2')\n * @description The ID used when configuring the OAuth2 provider in initialize()\n */\n providerId?: string;\n}\n\n// Define the provider-specific call types\nexport type ProviderSpecificCall = 'facebook#getProfile' | 'facebook#requestTracking';\n\n// Define the options and response types for each specific call\nexport interface FacebookGetProfileOptions {\n /**\n * Fields to retrieve from Facebook profile\n * @example [\"id\", \"name\", \"email\", \"picture\"]\n */\n fields?: string[];\n}\n\nexport interface FacebookGetProfileResponse {\n /**\n * Facebook profile data\n */\n profile: {\n id: string | null;\n name: string | null;\n email: string | null;\n first_name: string | null;\n last_name: string | null;\n picture?: {\n data: {\n height: number | null;\n is_silhouette: boolean | null;\n url: string | null;\n width: number | null;\n };\n } | null;\n [key: string]: any; // For additional fields that might be requested\n };\n}\n\nexport interface OpenSecureWindowOptions {\n /**\n * The endpoint to open\n */\n authEndpoint: string;\n /**\n * The redirect URI to use for the openSecureWindow call.\n * This will be checked to make sure it matches the redirect URI after the window finishes the redirection.\n */\n redirectUri: string;\n /**\n * The name of the broadcast channel to listen to, relevant only for web\n */\n broadcastChannelName?: string;\n}\n\nexport interface OpenSecureWindowResponse {\n /**\n * The result of the openSecureWindow call\n */\n redirectedUri: string;\n}\n\nexport type FacebookRequestTrackingOptions = Record<string, never>;\n\nexport interface FacebookRequestTrackingResponse {\n /**\n * App tracking authorization status\n */\n status: 'authorized' | 'denied' | 'notDetermined' | 'restricted';\n}\n\n// Map call strings to their options and response types\nexport type ProviderSpecificCallOptionsMap = {\n 'facebook#getProfile': FacebookGetProfileOptions;\n 'facebook#requestTracking': FacebookRequestTrackingOptions;\n};\n\nexport type ProviderSpecificCallResponseMap = {\n 'facebook#getProfile': FacebookGetProfileResponse;\n 'facebook#requestTracking': FacebookRequestTrackingResponse;\n};\n\n// Add a helper type to map providers to their response types\nexport type ProviderResponseMap = {\n facebook: FacebookLoginResponse;\n google: GoogleLoginResponse;\n apple: AppleProviderResponse;\n twitter: TwitterLoginResponse;\n oauth2: OAuth2LoginResponse;\n};\n\n/**\n * Error codes returned by the plugin.\n * @since 8.3.x\n */\nexport type SocialLoginErrorCode = 'USER_CANCELLED';\n\n/**\n * Errors thrown by SocialLogin methods.\n *\n * When a user dismisses or cancels the provider UI (popup closed, system dialog cancelled, access denied, etc.),\n * the plugin rejects with `code === 'USER_CANCELLED'` so the caller can distinguish user intent from real failures.\n * Other errors may omit the code or use provider-specific values.\n */\nexport interface SocialLoginError extends Error {\n code?: SocialLoginErrorCode | string;\n}\n\nexport interface SocialLoginPlugin {\n /**\n * Initialize the plugin\n * @description initialize the plugin with the required options\n */\n initialize(options: InitializeOptions): Promise<void>;\n /**\n * Login with the selected provider\n * @description login with the selected provider\n *\n * On user dismissal/cancellation, the Promise is rejected with `code === 'USER_CANCELLED'` (see `SocialLoginError`).\n */\n login<T extends LoginOptions['provider']>(\n options: Extract<LoginOptions, { provider: T }>,\n ): Promise<{ provider: T; result: ProviderResponseMap[T] }>;\n /**\n * Logout\n * @description Logout the user from the specified provider\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * It will reject with error: \"logout is not implemented when using offline mode\"\n *\n * @throws Error if Google provider is in offline mode\n */\n logout(options: {\n provider: 'apple' | 'google' | 'facebook' | 'twitter' | 'oauth2';\n providerId?: string;\n }): Promise<void>;\n /**\n * IsLoggedIn\n * @description Check if the user is currently logged in with the specified provider\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * It will reject with error: \"isLoggedIn is not implemented when using offline mode\"\n *\n * @throws Error if Google provider is in offline mode\n */\n isLoggedIn(options: isLoggedInOptions): Promise<{ isLoggedIn: boolean }>;\n\n /**\n * Get the current authorization code\n * @description Get the authorization code for server-side authentication\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * It will reject with error: \"getAuthorizationCode is not implemented when using offline mode\"\n *\n * In offline mode, the authorization code (serverAuthCode) is already returned by the `login()` method.\n *\n * @throws Error if Google provider is in offline mode\n */\n getAuthorizationCode(options: AuthorizationCodeOptions): Promise<AuthorizationCode>;\n /**\n * Refresh the access token\n * @description refresh the access token\n *\n * **Google Offline Mode Limitation:**\n * This method is NOT supported when Google is initialized with `mode: 'offline'`.\n * Offline mode only returns `serverAuthCode` for backend token exchange, so token refresh must happen on your backend.\n * The plugin logs and rejects with a message explaining that you should send `serverAuthCode` to your backend,\n * refresh the Google tokens there, or switch to `mode: 'online'` for client-side refresh.\n *\n * **Google Web Limitation:**\n * On Web, Google `refresh()` is not implemented, even when using `mode: 'online'`.\n * Call `login()` again on Web to obtain a fresh token instead.\n *\n * @throws Error if Google provider is in offline mode, or on Web where Google `refresh()` is not implemented\n */\n refresh(options: LoginOptions): Promise<void>;\n\n /**\n * OAuth2 refresh-token helper (feature parity with Capawesome OAuth).\n *\n * Scope:\n * - Only applies to the built-in `oauth2` provider (not Google/Apple/Facebook/Twitter).\n * - Requires a token endpoint (either `accessTokenEndpoint`/`tokenEndpoint` or `issuerUrl` discovery).\n *\n * Security note:\n * - This does not validate JWT signatures. It only exchanges/refreshes tokens.\n *\n * If `refreshToken` is omitted, the plugin will attempt to use the stored refresh token (if available).\n */\n refreshToken(options: {\n provider: 'oauth2';\n providerId: string;\n refreshToken?: string;\n additionalParameters?: Record<string, string>;\n }): Promise<OAuth2LoginResponse>;\n\n /**\n * Web-only: handle the OAuth redirect callback and return the parsed result.\n *\n * Notes:\n * - This is only meaningful on Web. iOS/Android implementations will reject.\n * - Intended for redirect-based flows (e.g. `oauth2` with `flow: 'redirect'`) where the page navigates away.\n */\n handleRedirectCallback(): Promise<LoginResult | null>;\n\n /**\n * Decode a JWT (typically an OIDC ID token) into its claims.\n *\n * Notes:\n * - Accepts both `idToken` and `token` to match common naming (Capawesome uses `token`).\n * - This does not validate the signature or issuer/audience. It only base64url-decodes the payload.\n *\n * **`email_verified` semantics by provider (for account linking):**\n * - **Google** — ID token includes `email_verified` (boolean). When `true`, Google attests\n * the user controls that email. Verify the JWT on your backend before trusting it.\n * - **Apple** — ID token includes `email_verified` (boolean). When `true`, Apple attests\n * the user controls that email (including private relay). Verify the JWT on your backend.\n * - **Meta (Facebook)** — Limited Login OIDC tokens may include `email` but **do not**\n * include `email_verified`. The presence of `email` is not the same guarantee as\n * `email_verified: true` from Google or Apple. Do not link accounts by email across\n * providers using Meta claims alone; perform your own email verification if needed.\n */\n decodeIdToken(options: { idToken?: string; token?: string }): Promise<{ claims: Record<string, any> }>;\n\n /**\n * Convert an access token expiration timestamp (milliseconds since epoch) to an ISO date string.\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n getAccessTokenExpirationDate(options: {\n /**\n * Access token expiration date in milliseconds since epoch.\n * Typically: `Date.now() + expiresInSeconds * 1000`.\n */\n accessTokenExpirationDate: number;\n }): Promise<{ date: string }>;\n\n /**\n * Check if an access token is available (non-empty).\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n isAccessTokenAvailable(options: { accessToken: string | null }): Promise<{ isAvailable: boolean }>;\n\n /**\n * Check if an access token is expired.\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n isAccessTokenExpired(options: { accessTokenExpirationDate: number }): Promise<{ isExpired: boolean }>;\n\n /**\n * Check if a refresh token is available (non-empty).\n *\n * This is a pure helper (feature parity with Capawesome OAuth) and does not depend on provider state.\n */\n isRefreshTokenAvailable(options: { refreshToken: string | null }): Promise<{ isAvailable: boolean }>;\n\n /**\n * Execute provider-specific calls\n * @description Execute a provider-specific functionality\n */\n providerSpecificCall<T extends ProviderSpecificCall>(options: {\n call: T;\n options: ProviderSpecificCallOptionsMap[T];\n }): Promise<ProviderSpecificCallResponseMap[T]>;\n\n /**\n * Get the native Capacitor plugin version\n *\n * @returns {Promise<{ id: string }>} an Promise with version for this device\n * @throws An error if the something went wrong\n */\n getPluginVersion(): Promise<{ version: string }>;\n\n /**\n * Opens a secured window for OAuth2 authentication.\n * For web, you should have the code in the redirected page to use a broadcast channel to send the redirected url to the app\n * Something like:\n * ```html\n * <html>\n * <head></head>\n * <body>\n * <script>\n * const searchParams = new URLSearchParams(location.search)\n * if (searchParams.has(\"code\")) {\n * new BroadcastChannel(\"my-channel-name\").postMessage(location.href);\n * window.close();\n * }\n * </script>\n * </body>\n * </html>\n * ```\n * For mobile, you should have a redirect uri that opens the app, something like: `myapp://oauth_callback/`\n * And make sure to register it in the app's info.plist:\n * ```xml\n * <key>CFBundleURLTypes</key>\n * <array>\n * <dict>\n * <key>CFBundleURLSchemes</key>\n * <array>\n * <string>myapp</string>\n * </array>\n * </dict>\n * </array>\n * ```\n * And in the AndroidManifest.xml file:\n * ```xml\n * <activity>\n * <intent-filter>\n * <action android:name=\"android.intent.action.VIEW\" />\n * <category android:name=\"android.intent.category.DEFAULT\" />\n * <category android:name=\"android.intent.category.BROWSABLE\" />\n * <data android:host=\"oauth_callback\" android:scheme=\"myapp\" />\n * </intent-filter>\n * </activity>\n * ```\n * @param options - the options for the openSecureWindow call\n */\n openSecureWindow(options: OpenSecureWindowOptions): Promise<OpenSecureWindowResponse>;\n}\n"]}
@@ -16,7 +16,7 @@ import GoogleSignIn
16
16
  */
17
17
  @objc(SocialLoginPlugin)
18
18
  public class SocialLoginPlugin: CAPPlugin, CAPBridgedPlugin {
19
- private let pluginVersion: String = "8.3.37"
19
+ private let pluginVersion: String = "8.3.38"
20
20
  public let identifier = "SocialLoginPlugin"
21
21
  public let jsName = "SocialLogin"
22
22
  private static let userCancelledCode = "USER_CANCELLED"
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "@capgo/capacitor-social-login",
3
- "version": "8.3.37",
3
+ "version": "8.3.38",
4
4
  "description": "All social logins in one plugin",
5
5
  "main": "dist/plugin.cjs.js",
6
6
  "module": "dist/esm/index.js",