@candledottv/cli 0.13.18 → 0.13.19

package/README.md

@@ -19,7 +19,7 @@ Single and batch rename require new labels of at most 64 characters, without edg
 control characters or a leading `-`; names are never trimmed. Existing longer labels still
 resolve as targets. A terminal is required. TEE wallets are refused by `vault rename`; use
 `candle tee rename`. A retired TEE wallet (demoted and swept) is the exception: it renames here,
-since Candle no longer holds it. `candle vault list` hides retired TEE wallets unless `--all`.
+since Candle no longer holds it. `candle vault list` hides retired TEE wallets unless `--all`; `vault fund` and `vault transfer` refuse one as a destination (`TEE_WALLET_STOPPED`).
 
 `candle tee rename <label|address|id> <new-label>` renames a TEE wallet on both sides: the label
 Candle holds and, when the wallet's key is in this vault, the vault entry.
@@ -138,7 +138,8 @@ chosen words from your saved copy. Clear your terminal's scrollback too: the CLI
 | `candle tee new\|enable` | `new` adds a key to an existing `tee-wallets.enc` and refuses when that store is absent (`vault new-key --chain solana`, then `vault promote --from <label> --to-key <prefix>`). `--factor` does not apply. `enable <address> --vault <address>` delegates an existing key with a pinned sweep vault. `vault import-legacy --tee` migrates an existing store. |
 | `candle swap <from> <to> --amount <n>\|--percent <n> --wallet <tee> [--to <tee>] [--wait]` | Quote, confirm and swap through the TEE wallet's bound key; the first buy after a launch is this command, unless `candle launch --buy` made it. The assets decide the chain (ETH, USDG or a 0x token is Hood; SOL, USDC, CNDL or a mint is Solana). SOL or USDC to ETH or USDG, or back, is a bridge through Relay into this key's own TEE wallet on the other chain (`--to` names it when there are several); `--wait` follows it for up to ten minutes. With `--json`, stdout is exactly one JSON value for swaps, token trades, replays and `swap status`: `kind`, `status`, `clientTradeId`, `signature` (the primary transaction, or `null`), `signatures` (a list) and `raw` (the original response). Every human line is on stderr. The keys older versions printed stay beside them. |
 | `candle swap status <id> [--kind trade\|swap\|launch] [--wait]` | Read an operation without resending it; `--wait` follows a bridge until it ends. |
-| `candle transfer --to <address\|wallet name\|allowlist label\|vault> --asset <SOL\|USDC\|CNDL\|ETH\|USDG>\|--mint <mint>\|--token <0x...> --amount <decimal\|max> [--wallet <tee>] [--rpc-url <url>] [--yes]` | Move funds out of a TEE wallet through its bound Withdraw key, to the wallet's own pinned vault (`--to vault`, any token, `max` allowed, one SOL transfer at most the server's backstop ceiling, 50 SOL by default) or to another of the account's wallets you linked while signed in or marked trusted (a base asset, counted against the key's caps, which must include a per-asset cap and a USD `--tx-limit`). Where the server has `TEE_WITHDRAWALS_ENABLED` on (it ships off), also to an address on the account's withdrawal allowlist, named by its label, id or address, with the same base-asset rule. The asset decides the chain: ETH, USDG or `--token` moves from a Hood TEE wallet. The destination and its kind are shown before you confirm; Candle builds, the relay signs, Candle broadcasts. |
+| `candle transfer --to <address\|wallet name\|allowlist label\|vault> --asset <SOL\|USDC\|CNDL\|ETH\|USDG>\|--mint <mint>\|--token <0x...> --amount <decimal\|max> [--wallet <tee>] [--client-id <id>] [--rpc-url <url>] [--yes]` | Move funds out of a TEE wallet through its bound Withdraw key, to the wallet's own pinned vault (`--to vault`, any token, `max` allowed, one SOL transfer at most the server's backstop ceiling, 50 SOL by default) or to another of the account's wallets you linked while signed in or marked trusted (a base asset, counted against the key's caps, which must include a per-asset cap and a USD `--tx-limit`). Where the server has `TEE_WITHDRAWALS_ENABLED` on (it ships off), also to an address on the account's withdrawal allowlist, named by its label, id or address, with the same base-asset rule. The asset decides the chain: ETH, USDG or `--token` moves from a Hood TEE wallet. The destination and its kind are shown before you confirm; Candle builds, the relay signs, Candle broadcasts. `--client-id <id>` (1 to 128 of letters, digits, `.` `_` `:` `-`) names the transfer yourself: reusing an id for a transfer already built or sent is `IDEMPOTENCY_CONFLICT` naming that transfer, so a retry never sends twice. |
+| `candle transfer status <transfer id\|client id> [--json]` | Where a transfer stands, by the id the build returned or the `--client-id` it was sent under: `built` (signable until `expiresAt`), `expired`, `submitted` with its `signature`, `unconfirmed` (may still land; check the chain or `candle activity` before using a new client id), or `failed`. Candle keeps the answer for 24 hours; an older transfer is in `candle activity`. An unknown id is `JOB_NOT_FOUND`. |
 | `candle launch --name <name> --symbol <symbol> --image <path>\|--image-url <url> --wallet <tee>\|embedded [--banner <file\|URL>] [--description <text>] [--website <url>] [--x <url>] [--telegram <url>] [--discord <url>] [--buy <amount>] [--quote-asset <asset>] [--dex-version v3\|v4] [--mode <mode>] [--curve-v <V> --curve-g <G>] [--creator-fee-bps 0\|100\|200] [--staker-allocation-bps <bps>] [--visibility production\|test\|local\|hidden] [--pool-fee 25\|50\|100] [--pool-fee-from <bps> --pool-fee-minutes <min>] [--pool-open legacy\|curve_price] [--exp-pool-shape floor\|full_range] [--fee-wallet <address>\|--fee-wallet-multisig <address> [--fee-wallet-multisig-vault-index <n>]] [--require-fee-wallet] [--open-in <duration>] [--max-buy-per-wallet <amount> --cap-window <duration>] [--allowlist <path> --allowlist-window <duration>] [--dev-buy-max <amount>] [--dry-run] [--check] [--client-trade-id <id>] [--yes]` | Create a token from the named wallet, with an optional first buy. `--wallet embedded` (or `main`) uses `/launch/headless` on Solana or Hood, with or without `--buy`; every plan can use it with `launch:write` and the key's embedded-wallet allowance, without `swap:write`. It previews through `/launch/headless/dry-run`, shows the quote for confirmation, then sends one headless request. A Solana buy is a creator bundle signed by Candle, preserving `bundleId` in the result; a Hood buy is best effort after creation. The server's slippage floor applies; there is no separate CLI build-floor comparison. TEE wallets use `/launch/self` and need Pro or Max, `launch:write`, the bound key and verified signing authority; a server with `TEE_LAUNCH_BY_SCOPE_ENABLED` off also asks for the owner's `allowLaunch` (deprecated). A TEE first buy needs `TEE_LAUNCH_BUYS_ENABLED` (off by default), and with `TEE_LAUNCH_BY_SCOPE_ENABLED` on it also needs `swap:write` (a key without it gets `SCOPE_MISSING`); Solana creator buys also need `AGENT_TRADING_ENABLED` and a configured Jito engine. No gate or plan default changes. `--buy` is a decimal in whole quote units (SOL/USDC/CNDL on Solana, ETH on Hood; USDG has no first buy); zero or empty means no buy. A Hood launch needs `--dex-version v3\|v4`. `--description` and the four absolute http(s) socials flags travel with every preview/build: `--x` maps to `socials.twitter`. `--staker-allocation-bps` accepts 50–1000; `--visibility` is production, test, local or hidden (test keys need test or hidden). `--mode exp-custom` needs `--curve-v` and `--curve-g` in whole quote units; ranges and common help come from the shared launch definition and appear in `candle launch --help`. `--pool-fee` sets the Solana graduated pool fee (default 50 bps); `--pool-fee-from` and `--pool-fee-minutes` add a fall to that rate. Preset `--pool-open curve_price` opens at the curve's last price and burns the rest; omitted it applies when allocations fit `graduation.maxStakerCarveBps`, otherwise falls back to legacy. Exp `--exp-pool-shape` is floor or full_range. `--image-url` is https; `--image` uploads a local PNG/JPEG/GIF/WebP up to 10MB. `--banner` takes a wide local file or https URL. Uploads are public and permanent before confirmation, even on a dry run or decline. `--dry-run` stops at the preview without claiming the launch id. Reuse `--client-trade-id` for recovery, and always pass `--json` in scripts. `--check` answers which launch path works before any of it, in one call (`GET /api/v1/launch/preflight`): the key's tier and embedded-wallet allowance, each bound TEE wallet's allowLaunch (served `true` where the server has `TEE_LAUNCH_BY_SCOPE_ENABLED` on) and verified-active state, and the server's `TEE_LAUNCH_BY_SCOPE_ENABLED`, `TEE_LAUNCH_BUYS_ENABLED` and `AGENT_TRADING_ENABLED` switches. No name, symbol or image is needed, nothing is uploaded or sent, `--wallet <name>` narrows the answer to one wallet, and it exits 1 when no launch path works. On Solana, where the server has `CURVE_LAUNCH_RULES_ENABLED` on, launch rules are fixed at launch and enforced by the curve program: `--open-in` delays the open (until then only the launching wallet may buy, up to `--dev-buy-max`, which defaults to `--buy`), `--max-buy-per-wallet` with `--cap-window` caps what each wallet spends on the curve after the open, and `--allowlist <path>` (one address per line, or comma separated, at most 4,096) with `--allowlist-window` lets only the listed wallets buy. Durations are seconds or `90m`, `6h`, `2d` (the open at most 7 days away, each window at most 24 hours); amounts are whole quote units. The CLI checks each value before any request with the API's bounds, sends the request's nested `launchRules` in raw units, and the preview prints a Launch rules block from the API's answer. Nobody can change the rules after the launch. |
 | `candle launch status <mint-or-client-launch-id> [--wait]` | One launch state, `build`, `signed`, `confirmed`, `trading`, `bonded` or `migrated`, for a mint or a `clientLaunchId`. Reads `GET /api/v1/launch/status/{id}` (`launch:read`) and reports the market's own `lifecycle` and `migration` fields. `--wait` follows it until the token is trading, the launch has failed, or ten minutes pass. Nothing is sent. |
 | `candle image upload <path>` | Uploads a PNG, JPEG, GIF or WebP file, at most 10MB, and prints the `https://` URL Candle hosts it at, ready to be a launch's `imageUrl`. The type is read from the file's first bytes. The file becomes public and permanent. Needs `launch:write`; spends nothing and does not count against the launch cap. `--json` adds the content type and the size. |
@@ -168,6 +169,10 @@ chosen words from your saved copy. Clear your terminal's scrollback too: the CLI
 
 `candle vault transfer <to> --amount max --asset SOL --from <label>` sends the source wallet’s SOL balance minus the exact quoted transaction fee. The plain system wallet is emptied, so its source rent reserve is zero. The balance and fee are refreshed after confirmation; a changed amount or fee is displayed and must be confirmed again (at most three confirmations). An unavailable or unstable fee quote, or a balance that cannot cover the fee and a positive send, refuses before signing. Nonce and program accounts cannot use this plain transfer shape. SPL and Token-2022 `max` send the source associated token account’s full raw balance (mint fees may reduce what arrives); SOL must still cover fees and any destination token account rent. Hood native `max` deducts the fee cap; ERC-20 `max` sends the whole token balance.
 
+### Retrying a transfer safely
+
+Pass `--client-id <id>` and a retry cannot send twice. The id rides the build as `clientTransferId`, and the receipt carries it back. If the first attempt died before you saw the result, run `candle transfer status <id>` (the transfer id or your client id): `submitted` shows the `signature`, `built` means nothing was sent yet, and `expired` means the build lapsed unsent. `unconfirmed` keeps the signature and the client id bound even after the build expires: it may still land, so check the chain or `candle activity` before doing anything else or using a new client id. `failed` means a definite revert or a refusal before broadcast. Running the same `candle transfer --client-id <id>` again while the earlier one is pending, built, sent or unconfirmed is refused with `IDEMPOTENCY_CONFLICT`, naming the transfer. Status is kept for 24 hours; older transfers are in `candle activity`.
+
 `candle transfer --asset SOL --amount max` (including `--to vault` from a TEE wallet) sends the balance minus 10,000 lamports of fee headroom and the RPC-reported rent-exempt minimum for a zero-byte system account. It keeps the payer rent-exempt. If no positive amount remains, Candle refuses before signing with `TRANSFER_AMOUNT_UNAVAILABLE`; the message reports the spendable lamports, fee headroom and rent minimum. The returned `amountRaw` is the amount the transaction moves.
 
 The documented `--access` values are `read`, `write` and `withdraw`. The older `read-write`, `transfer` and `read-write-transfer` values remain accepted as silent, permanent aliases.
@@ -261,7 +266,10 @@ A generated vault passphrase is shown once on the terminal and never inside a JS
 `vault init` and `vault factor add passphrase` under `--json` take `--own-passphrase` (typed at a
 hidden prompt, nothing shown) and refuse the generated form with exit `2`. Prompts themselves are
 rendered on stderr, so a command that unlocks a vault on a terminal still leaves stdout as one
-JSON value. A security key's PIN is read the same way, by the CLI on its own hidden prompt, and
+JSON value. A vault command run without a terminal to prompt at — stdin and stdout for the
+ceremony commands, stdin and stderr for the prompt itself — refuses with `VAULT_TERMINAL_REQUIRED`
+before anything is asked; it is not an unlock failure, and no flag or environment variable
+supplies a passphrase or PIN. A security key's PIN is read the same way, by the CLI on its own hidden prompt, and
 reaches the `candle-fido2` helper only inside a request piped to it; the helper never reads the
 terminal and the PIN never appears in any output.