@candledottv/cli 0.11.16 → 0.11.18

package/README.md

@@ -1,6 +1,6 @@
 # @candledottv/cli
 
-The Candle CLI (current version 0.11.15): authorize a device from your browser, keep your own keys
+The Candle CLI (current version 0.11.18): authorize a device from your browser, keep your own keys
 in an encrypted vault on this machine, hand an agent a TEE wallet it can trade, and manage API
 keys, wallets, and setup health from the terminal. Zero runtime dependencies; the whole thing is
 one self-contained `dist/index.js` that runs under plain Node.
@@ -70,16 +70,17 @@ emergency procedure, rebinding, trusted wallets and API key access levels are al
 | `candle auth login [--profile <name>] [--scopes <a,b,c>] [--label <name>] [--no-browser]` | Authorizes this device: prints a code, opens (or prints) an approval URL, polls until approved, then stores the resulting device token and API key. `--label` names both the device and the key. |
 | `candle auth status` | Shows which storage backend is in use, both credential prefixes, the config file path, and a live validity check for each credential. |
 | `candle auth logout [--keep-key]` | Revokes the stored API key (skipped with `--keep-key`), clears local credentials and config, and prints the portal URL for revoking the device itself. |
-| `candle keys list [--scopes]` | Lists this account's API keys: prefix, name, Read, Read:Write or Read:Write:Transfer access, environment, timestamps, and which device minted each one. `--scopes` adds the raw scopes, sorted. |
-| `candle keys create [--access read\|read-write\|read-write-transfer \| --scopes <a,b,c>] [--label <name>] [--expires-in <days>] [--tx-limit <usd> [--reset daily\|weekly\|monthly\|never]] [--embedded-wallet deny\|allow]` | Creates a new API key and prints the plaintext exactly once, with the same optional name, expiration, and USD transaction limit the portal's create form takes. `--access` mints one of the portal's three levels (`read-write-transfer` is Read:Write plus `transfer:bound`: the key can move funds out of the wallet it runs, to wallets you linked while signed in or marked trusted and to that wallet's vault); `--scopes` names raw scopes instead, never both. `--embedded-wallet` defaults to `deny`; `allow` lets the key spend the account's embedded wallet and is confirmed at a terminal. Stored locally only if the CLI does not already hold a working key. An account holds at most 12 active keys. |
-| `candle keys access <prefix\|label\|self> (--access read\|read-write\|read-write-transfer [--yes] \| --history)` | Changes an existing key's level in place (same key, wallets and caps). Widening needs the device token and the prefix typed back at a terminal; `--yes` skips the prompt when narrowing; `self` narrows the profile's own key and can never widen it. `--history` lists the key's changes and who made them. |
+| `candle keys list [--scopes]` | Lists this account's API keys: prefix, name, Read, Write or Withdraw access, environment, timestamps, and which device minted each one. `--scopes` adds the raw scopes, sorted. |
+| `candle keys create [--access read\|write\|withdraw \| --scopes <a,b,c>] [--label <name>] [--expires-in <days>] [--tx-limit <usd> [--reset daily\|weekly\|monthly\|never]] [--embedded-wallet deny\|allow]` | Creates a new API key and prints the plaintext exactly once, with the same optional name, expiration, and USD transaction limit the portal's create form takes. `--access` mints one of the portal's three levels (`withdraw` is Write plus `transfer:bound`: the key can move funds out of the wallet it runs, to wallets you linked while signed in or marked trusted and to that wallet's vault); `--scopes` names raw scopes instead, never both. `--embedded-wallet` defaults to `deny`; `allow` lets the key spend the account's embedded wallet and is confirmed at a terminal. Stored locally only if the CLI does not already hold a working key. An account holds at most 12 active keys. |
+| `candle keys access <prefix\|label\|self> (--access read\|write\|withdraw [--yes] \| --history)` | Changes an existing key's level in place (same key, wallets and caps). Widening needs the device token and the prefix typed back at a terminal; `--yes` skips the prompt when narrowing; `self` narrows the profile's own key and can never widen it. `--history` lists the key's changes and who made them. |
 | `candle keys update <prefix\|label> --embedded-wallet allow\|deny [--yes]`, `candle keys self embedded-wallet deny` | Allow or deny a key the account's embedded wallet, with the device token (allowing needs the prefix typed back at a terminal). `self embedded-wallet deny` lets the profile's own key give it up with no prompt; a key can never allow itself. |
 | `candle keys signer approve <code> --key <prefix\|label> [--reject]`, `candle keys signer move <prefix\|label> [--to-key <prefix\|label>]` | Key signers for bots on a different machine from the vault. `approve` accepts (or rejects) a key's signer request with the device token, after you type the full fingerprint the trading machine printed. `move`, on the machine holding a wallet's current signer, moves every wallet on the key onto its active signer; `--to-key` moves a revoked key's wallets to a live key. |
 | `candle keys revoke <prefix>` | Revokes an API key by prefix. Revoking the CLI's own stored key also clears it locally. |
 | `candle keys wallets <prefix>`, `keys wallets set <prefix> --wallets <id,id>`, `keys wallets scope <prefix> --scope all\|selected` | Each key is an agent profile with its own wallet set: list it, replace it, or limit the profile to its assigned wallets. |
 | `candle wallets` (alias `candle wallet`) | Shows the account's embedded (launch) wallets and any linked wallets, using the API key, with a `Signer` column saying whether this machine holds each linked wallet's signing key and a `Trusted` column saying whether it is yours (linked while signed in, or marked with `trust`). It links and revokes; it never generates or prints a key, which the vault now derives. |
 | `candle wallets import --chain solana\|evm`, `wallets revoke <wallet-id>` | Link a wallet you own (key from `--key-file` or a hidden prompt, sealed to Privy before it leaves the machine), or unlink one. |
-| `candle wallets trust\|untrust <label\|address\|id\|prefix*>...` | Mark linked wallets as yours so an agent's Read:Write:Transfer key can move funds into them, or clear the mark. Owner only, over the device token, with a typed confirm; a trailing `*`, as in `'tr-*'`, selects by prefix. |
+| `candle wallets trust\|untrust <label\|address\|id\|prefix*>...` | Mark linked wallets as yours so an agent's Withdraw key can move funds into them, or clear the mark. Owner only, over the device token, with a typed confirm; a trailing `*`, as in `'tr-*'`, selects by prefix. |
+| `candle wallets allow-launch\|disallow-launch <label\|address\|id\|prefix*>...` | Let TEE wallets pay for a launch (`candle launch`), or stop them. Owner only, over the device token; the screen shows each wallet's label, address and bound key before a typed confirm. `disallow-launch --yes` skips the confirm. |
 | `candle wallets close-empty [--wallet embedded] [--keep <mint>]... [--yes]` | Closes the embedded wallet's empty token accounts and returns their rent to it, after a preview (`transfer:write`). |
 | `candle vault init\|status\|list\|new-key\|rename\|phrase show\|restore\|reconcile-exposure` | The encrypted local vault, `vault.enc` (Tier 1). `init` creates it with a passphrase factor and a 24-word recovery phrase (and no key), `new-key` derives a key inside it (`--count`, `--labels-from <file>` for many under one unlock), `list [filter] [--balances]` shows one line per key, `rename` changes a label only, `phrase show` displays the phrase on a terminal (never in `--json`, a log or a pipe), and `restore --phrase` rebuilds the derived keys on another machine with a new passphrase (`--count`, `--tee-count`, `--external-count`, `--evm-count` and `--evm-tee-count` for EVM keys and Hood TEE wallets, or a Solana gap scan with `--rpc-url`); a restored vault never allocates new keys. `reconcile-exposure` re-reads the account and adds exposure records, clearing nothing. No key ever leaves the vault to reach Candle. See [CLI custody](https://docs.candle.tv/developers/cli-custody). |
 | `candle vault factor list\|add passphrase\|add security-key\|add touch-id\|add passkey\|remove` (or `vault enroll <kind>`), `vault backup --to <path>\|icloud`, `vault verify-backup <path>` | What can open the vault, and proving a copy of it works: `backup` verifies the copy in full before reporting (a copy is sealed, keeping only the passphrase and security-key envelopes, unless it goes to a recognised local disk or removable drive, so a cloud folder and any path the CLI cannot place are both sealed unless `--accept-shared-domain` is passed), and `verify-backup` re-checks an existing one against this vault's key and address set. `add security-key` enrolls a FIDO2 security key (CTAP2 `hmac-secret`, user-verified with the key's PIN or biometric) through the bundled `candle-fido2` helper (`--install-helper` fetches and verifies this release's helper first); one key is not a recoverable factor, two keys are a pair, an enrolled key can authorize adding another, and the passphrase stays the recovery floor. `add touch-id` and `add passkey` are refused with `VAULT_FACTOR_UNSUPPORTED_ON_PLATFORM` until the Apple-signed helper ships. Every vault command then takes `--factor <id\|passphrase\|security-key>` to say which envelope opens it and `--device <id>` to name the key when several are attached. |
@@ -93,10 +94,10 @@ emergency procedure, rebinding, trusted wallets and API key access levels are al
 | `candle tee signer new --key <prefix\|label> [--out <pem>] [--force]` | On the trading machine, with that key's API key: generates the key's signer here and waits for the owner to approve it with `keys signer approve`. The key's wallets then trade from this machine. `--out` also writes a plaintext PEM for an SDK process. |
 | `candle tee rebind <wallet...> --to-key <prefix\|label>`, `candle tee rebinds [wallet]` | Move TEE wallets to another key on the same account (owner only, preview then `confirm`; funds and the relay signer do not move), and list the rebind history. |
 | `candle tee new\|enable` | The legacy path: `new` seals a fresh key in its own `tee-wallets.enc` and `enable <address> --vault <address>` delegates it with a pinned sweep vault. New setups use `vault promote`; `vault import-legacy --tee` migrates an existing store. |
-| `candle swap <from> <to> --amount <n>\|--percent <n> --wallet <tee> [--to <tee>] [--wait]` | Quote, confirm and swap through the TEE wallet's bound key; first buy after a launch is this command. The assets decide the chain (ETH, USDG or a 0x token is Hood; SOL, USDC, CNDL or a mint is Solana). SOL or USDC to ETH or USDG, or back, is a bridge through Relay into this key's own TEE wallet on the other chain (`--to` names it when there are several); `--wait` follows it for up to ten minutes. |
+| `candle swap <from> <to> --amount <n>\|--percent <n> --wallet <tee> [--to <tee>] [--wait]` | Quote, confirm and swap through the TEE wallet's bound key; the first buy after a launch is this command, unless `candle launch --buy` made it. The assets decide the chain (ETH, USDG or a 0x token is Hood; SOL, USDC, CNDL or a mint is Solana). SOL or USDC to ETH or USDG, or back, is a bridge through Relay into this key's own TEE wallet on the other chain (`--to` names it when there are several); `--wait` follows it for up to ten minutes. |
 | `candle swap status <id> [--kind trade\|swap\|launch] [--wait]` | Read an operation without resending it; `--wait` follows a bridge until it ends. |
-| `candle transfer --to <address\|wallet name\|vault> --asset <SOL\|USDC\|CNDL\|ETH\|USDG>\|--mint <mint>\|--token <0x...> --amount <decimal\|max> [--wallet <tee>] [--rpc-url <url>] [--yes]` | Move funds out of a TEE wallet through its bound Read:Write:Transfer key, to the wallet's own pinned vault (`--to vault`, any token, `max` allowed, one SOL transfer at most the server's backstop ceiling, 50 SOL by default) or to another of the account's wallets you linked while signed in or marked trusted (a base asset, counted against the key's caps, which must include a per-asset cap and a USD `--tx-limit`). The asset decides the chain: ETH, USDG or `--token` moves from a Hood TEE wallet. The destination and its kind are shown before you confirm; Candle builds, the relay signs, Candle broadcasts. |
-| `candle launch --name <name> --symbol <symbol> --image-url <url> --wallet <tee> [--quote-asset <asset>] [--dex-version v3\|v4]` | Create a token with no first buy; needs `launch:write`, operator-enabled `allowLaunch`, and the Pro or Max plan. The wallet decides the chain: a Hood TEE wallet launches on Hood and needs `--dex-version`. `--quote-asset` is sol, usdc or cndl on Solana, eth or usdg on Hood. |
+| `candle transfer --to <address\|wallet name\|vault> --asset <SOL\|USDC\|CNDL\|ETH\|USDG>\|--mint <mint>\|--token <0x...> --amount <decimal\|max> [--wallet <tee>] [--rpc-url <url>] [--yes]` | Move funds out of a TEE wallet through its bound Withdraw key, to the wallet's own pinned vault (`--to vault`, any token, `max` allowed, one SOL transfer at most the server's backstop ceiling, 50 SOL by default) or to another of the account's wallets you linked while signed in or marked trusted (a base asset, counted against the key's caps, which must include a per-asset cap and a USD `--tx-limit`). The asset decides the chain: ETH, USDG or `--token` moves from a Hood TEE wallet. The destination and its kind are shown before you confirm; Candle builds, the relay signs, Candle broadcasts. |
+| `candle launch --name <name> --symbol <symbol> --image-url <url> --wallet <tee> [--buy <amount>] [--quote-asset <asset>] [--dex-version v3\|v4]` | Create a token from a TEE wallet. Without `--buy` it makes no first buy. `--buy <amount>` adds one from the same wallet, in whole units of the quote asset, reserved against the key's spend window before signing: in the launch transaction on Solana, as a last leg on Hood. It needs the server's `TEE_LAUNCH_BUYS_ENABLED`, which is off by default; while it is off Candle refuses the buy and nothing is built. Needs `launch:write`, `allowLaunch` turned on for the wallet by the account owner, and the Pro or Max plan. On Free, launch from the embedded wallet instead, with an optional dev buy (same transaction on Solana; best-effort follow-up on Hood): the MCP tool `candle_launch_and_seed` or the SDK's `launch()`. The wallet decides the chain: a Hood TEE wallet launches on Hood and needs `--dex-version`. `--quote-asset` is sol, usdc or cndl on Solana, eth or usdg on Hood. |
 | `candle pnl [--profile <name>]` | P&L: realized net, fees, unrealized and total, then open positions, the same figures the console shows. Without `--profile`, the account's books (every profile, the web app and the CLI, one ledger; needs the Read scope), with a By agent table (each key, then Manual, then the account total). With `--profile <name>`, that profile's key's share of the same P&L: realized on its sales and the open positions that belong to it, with a row per wallet that sums to the total. Each wallet is its own average-cost pool, and a recorded move between the account's wallets carries its cost. Both show a Solana block, a Hood block, then the combined figure, the closed positions as money made, minus money lost, plus partial sells, and a `CHAIN` column (and `WALLET`, where the API names it) on positions. Unpriced positions are never valued at zero; dust (worth under one cent) is marked and still counted. A bridge between Solana and Hood is not a trade, and bridge and Relay costs are not netted. DAMM v2 LP positions are included: realized (withdrawals against the cost basis at the add, plus claimed fees), unrealized (open positions at their share of the pool plus unclaimed fees, against that basis) and vs holding (what the deposited tokens would be worth held); `Total` stays the console's token figure and `Total with LP` covers tokens and LP. |
 | `candle portfolio [<filter>] [--chain solana\|hood] [--rpc-url <url>] [--evm-rpc-url <url>]` | Vault, TEE and embedded wallets on Solana and Hood in one table with chain, amount, price and value, subtotals per group and per chain, and a total. Solana vault and external balances are read over your own Solana RPC; Candle is sent only the mints, for prices. EVM vault keys are read over your own Hood RPC (`--evm-rpc-url`, else `CANDLE_EVM_RPC_URL`, else the built-in Hood RPC) for ETH and USDG only, priced by asset, never by address; an RPC on another chain is refused. An unpriced Hood token shows why (`no-market-row`, `stale-mark`, ...). `--chain` shows one chain. Each TEE wallet's DAMM v2 LP positions follow the tokens, valued by Candle at the same marks, and count in the total; one whose pool could not be read is shown as not read and the total says it is partial. |
 | `candle plans` | The plans the API serves (`GET /api/v1/agent/plans`): each plan's monthly price, agent trade fee, Hyperliquid perps builder fee, the limits a new key gets, and one row per capability (buying and selling tokens not launched on Candle, self-launch, atomic launch, linked wallets, perps, limit orders). Every number is the server's; the CLI bundles none. Needs no key and sends none. `--json` is the server's body. Your own plan is `candle doctor`'s Plan row. |
@@ -115,6 +116,8 @@ emergency procedure, rebinding, trusted wallets and API key access levels are al
 | `candle completion <zsh\|bash\|fish>` | Prints a shell completion script to stdout, generated from the same data `candle help` prints, so it offers exactly the commands, subcommands and flags the help documents. Install it by redirecting: `candle completion zsh > "${fpath[1]}/_candle"`, `candle completion bash > ~/.local/share/bash-completion/completions/candle`, `candle completion fish > ~/.config/fish/completions/candle.fish`. Static: profile names, key labels and factor ids are not completed, because that would mean reading config or opening the vault at tab time. Regenerate after every `candle update`. |
 | `candle help [<command>]` | The top-level screen (six groups of command words, the global flags, and every environment variable the CLI reads), or one command's own: its subcommands, the flags they share, examples, and the environment it reads. `candle <command> --help` is the same screen. Reads no config and makes no request, so it answers before any profile is selected. |
 
+The documented `--access` values are `read`, `write` and `withdraw`. The older `read-write`, `transfer` and `read-write-transfer` values remain accepted as silent, permanent aliases.
+
 Every command accepts these global options:
 
 | Flag | Effect |
@@ -408,13 +411,19 @@ Before signing, the command displays venue, price impact, tier fee, minimum rece
 all returned token warnings. Missing price impact is explicitly **unavailable**, never zero.
 `--yes` skips the ordinary prompt but still prints warnings. With `--json`, stdout is one
 JSON result containing the quote; the preview and operation id go to stderr. Launch creation
-has no price impact or token receipt, shows its maximum SOL debit, and makes no first buy.
-Use a separate swap for that buy.
-
-Swaps require `swap:write`. Launch requires `launch:write` **and** operator-enabled
-`allowLaunch` on the wallet. The operator sets or clears it through the shipped
-`PUT /api/v1/agent/wallets/<id>/capabilities` endpoint with device/session authentication and
-`{"capability":"allowLaunch","enabled":true}`. An agent key cannot grant itself this permission.
+has no price impact or token receipt and shows its maximum SOL debit. Without `--buy` it makes
+no first buy; use a separate swap for that buy. With `--buy <amount>` (whole units of the quote
+asset, as `--amount` is for a swap) the same wallet buys at launch: in the launch transaction on
+Solana, as a last leg after the curve and the fee on Hood. Candle reserves the buy against the
+key's spend window before anything is signed. `--buy` needs the server's
+`TEE_LAUNCH_BUYS_ENABLED=1`, which is off by default; while it is off Candle refuses the buy
+(`VALIDATION_FAILED` on `buyAmount`) and nothing is built or signed.
+
+Swaps require `swap:write`. Launch requires `launch:write` **and** `allowLaunch` on the
+wallet, which is off by default. The account owner (not Candle, and not the agent) sets it with
+`candle wallets allow-launch <wallet>` and clears it with `candle wallets disallow-launch <wallet>`,
+over the device token from `candle auth login` (the same endpoint, `PUT /api/v1/agent/wallets/<id>/capabilities`,
+takes a device token or a web session). An agent key cannot grant itself this permission.
 
 For scripts, always supply a stable `--client-trade-id` for each intention. Otherwise the CLI
 generates and prints one. Reusing an existing id reads its status instead of rebuilding.