@camstack/ui-library 1.2.323 → 1.2.324

package/dist/composites/clips/ClipsSection.d.ts

@@ -31,8 +31,8 @@
 *  - **Four states are tellable apart**: loading, empty-with-a-cause,
 *    degraded-per-source, and each silent source in its own words. Every one
 *    of them used to render as "no clips", which is the defect this whole line
-*    of work is about — a camera with no SD card (640) is not quiet, and a
-*    camera whose own index disagrees with its own calendar (618, 6–20
+*    of work is about — a camera with no SD card (106) is not quiet, and a
+*    camera whose own index disagrees with its own calendar (108, 6–20
 *    September) is not quiet either.
 *
 * ## The period comes from the recording section's timebar, not a day picker
@@ -85,7 +85,7 @@
 * There is no "default" option and no empty value. This section used to send
 * no `provider` at all until the operator chose, because the cap documented
 * absence as "the device's bound provider, which is CamStack on every camera".
-* No code implemented that: measured on device 592 (2026-09-20, bound to
+* No code implemented that: measured on device 107 (2026-09-20, bound to
 * `recorder` AND `provider-reolink`) a bare `listClips` with `limit: 3`
 * answered SIX rows — three per source, merged — while the default option read
 * "CamStack recordings". The label named one thing and the query asked two.

package/dist/composites/device-item/header.d.ts

@@ -9,7 +9,7 @@
 *     narrow. Used by table view + minimal in-panel lists.
 *   - `stacked=true`: name is the visual anchor of a vertical card. No
 *     truncation, two-line clamp so longer names wrap instead of
-*     collapsing into "Videocamera vera…". Typography is larger /
+*     collapsing into "Camera vera…". Typography is larger /
 *     heavier so the name dominates the secondary metadata that sits
 *     below it.
 *

package/dist/composites/device-list/columns.d.ts

@@ -89,7 +89,7 @@ export declare const NAME_COLUMN_PIN_CLASS: "md:sticky md:left-0 md:z-[1]";
 * ── The NAME never truncates below the pin breakpoint ─────────────────────
 *
 * Fitting NAME + Preview inside a phone viewport was the wrong trade: every
-* camera collapsed to "Videocamera ve…" / "Videocamera co…", which is not a
+* camera collapsed to "Camera ve…" / "Camera co…", which is not a
 * shortened name, it is NO name — the rows became indistinguishable and the
 * one thing the operator opened the page to read was the part that got cut.
 *

package/dist/composites/device-list/fuzzy-match.d.ts

@@ -2,17 +2,17 @@
 * fuzzy-match — case and separator-insensitive text search helper.
 *
 * Normalization rule: lowercase + strip all runs of hyphens, underscores and
-* whitespace entirely.  This makes `Tapparella cucina` and `tapparella-cucina`
-* both normalize to `tapparellacucina`, so a substring match succeeds in
+* whitespace entirely.  This makes `Tapparella kitchen` and `tapparella-kitchen`
+* both normalize to `tapparellakitchen`, so a substring match succeeds in
 * either direction.
 */
 /**
 * Strips hyphens, underscores and whitespace runs from `s` and lowercases it.
 *
 * @example
-* normalizeForSearch('Tapparella cucina') // 'tapparellacucina'
-* normalizeForSearch('tapparella-cucina') // 'tapparellacucina'
-* normalizeForSearch('tapparella_cucina') // 'tapparellacucina'
+* normalizeForSearch('Tapparella kitchen') // 'tapparellakitchen'
+* normalizeForSearch('tapparella-kitchen') // 'tapparellakitchen'
+* normalizeForSearch('tapparella_kitchen') // 'tapparellakitchen'
 */
 export declare function normalizeForSearch(s: string): string;
 /**
@@ -20,8 +20,8 @@ export declare function normalizeForSearch(s: string): string;
 * form of `query`.  An empty query always matches.
 *
 * @example
-* fuzzyMatch('Tapparella cucina', 'tapparella-cucina') // true
-* fuzzyMatch('tapparella cucina', 'Tapparella-Cucina') // true
-* fuzzyMatch('xyz', 'tapparella-cucina')               // false
+* fuzzyMatch('Tapparella kitchen', 'tapparella-kitchen') // true
+* fuzzyMatch('tapparella kitchen', 'Tapparella-Kitchen') // true
+* fuzzyMatch('xyz', 'tapparella-kitchen')               // false
 */
 export declare function fuzzyMatch(query: string, target: string): boolean;

package/dist/composites/model-picker.d.ts

@@ -4,7 +4,7 @@ export type ModelOption = PipelineAddonSchema["models"][number];
 /**
 * Shared model picker — the ONE model-selection control across the app.
 *
-* Provider first (CamStack / Frigate / Scrypted / Custom), then inside that
+* Provider first (CamStack / plus catalog / plugin catalog / Custom), then inside that
 * catalog the grouped Family→Tier→Variant selector when entries declare
 * `group`, else a flat `<select>`. The persisted value stays the flat model
 * id. `value === ''` renders nothing selected (callers that support an

package/dist/hooks/use-stationary-overlay.d.ts

@@ -3,7 +3,7 @@ import type { StationaryOverlayBox } from "@camstack/types";
 * The ONE route this hook needs.
 *
 * Deliberately NOT the device proxy. The proxy exposes only the caps BOUND to
-* a device, and `zone-analytics` is not one of them — on device 617 the
+* a device, and `zone-analytics` is not one of them — on device 102 the
 * bindings are `pipeline-analytics` and `motion-zones`. Reading the census
 * through `dev?.zoneAnalytics?.…` therefore resolved to `undefined`, the hook
 * returned an empty census, and the overlay drew nothing while reporting

package/dist/index.cjs

@@ -13076,7 +13076,7 @@ var FACET_TRIGGER = "inline-flex max-w-full items-center gap-1 rounded-md border
 var FACET_ITEM = "flex h-7 w-full items-center gap-2 px-2 text-left text-xs text-foreground hover:bg-surface-hover";
 /**
 * One facet as a compact MULTI-select dropdown: closed it is one line
-* ("Location · Cucina, Salone"), open it lists every value with a check.
+* ("Location · Kitchen, Hall"), open it lists every value with a check.
 * The operator asked for dropdowns over rows of chips (2026-09-05): with
 * sixteen rooms and a dozen types the chips ate the panel.
 */
@@ -20436,7 +20436,7 @@ function CameraGridLayoutEditor({ deviceId }) {
 * The honest report. A grid's `high` composes its sources' `high` and its `low`
 * their `low`, so a profile is on offer only when EVERY source can serve it —
 * and the refusal names the source, because "this grid has no low" is not
-* something an operator can act on and "615 has no low" is.
+* something an operator can act on and "101 has no low" is.
 *
 * Read-only on purpose: what is on offer is decided by the source cameras'
 * assignments, and a control here would be a switch that writes nothing (D62).
@@ -23914,8 +23914,8 @@ function resolveClipsView(input, t = defaultUiText) {
 *  - **Four states are tellable apart**: loading, empty-with-a-cause,
 *    degraded-per-source, and each silent source in its own words. Every one
 *    of them used to render as "no clips", which is the defect this whole line
-*    of work is about — a camera with no SD card (640) is not quiet, and a
-*    camera whose own index disagrees with its own calendar (618, 6–20
+*    of work is about — a camera with no SD card (106) is not quiet, and a
+*    camera whose own index disagrees with its own calendar (108, 6–20
 *    September) is not quiet either.
 *
 * ## The period comes from the recording section's timebar, not a day picker
@@ -23968,7 +23968,7 @@ function resolveClipsView(input, t = defaultUiText) {
 * There is no "default" option and no empty value. This section used to send
 * no `provider` at all until the operator chose, because the cap documented
 * absence as "the device's bound provider, which is CamStack on every camera".
-* No code implemented that: measured on device 592 (2026-09-20, bound to
+* No code implemented that: measured on device 107 (2026-09-20, bound to
 * `recorder` AND `provider-reolink`) a bare `listClips` with `limit: 3`
 * answered SIX rows — three per source, merged — while the default option read
 * "CamStack recordings". The label named one thing and the query asked two.
@@ -31960,8 +31960,8 @@ function GroupedModelSelector({ catalog, value, onChange, disabled }) {
 //#region src/composites/model-picker.tsx
 var PROVIDER_LABEL = {
 	camstack: "CamStack",
-	frigate: "Frigate",
-	scrypted: "Scrypted",
+	frigate: "plus catalog",
+	scrypted: "plugin catalog",
 	custom: "Custom"
 };
 function providerOf(model) {
@@ -31970,7 +31970,7 @@ function providerOf(model) {
 /**
 * Shared model picker — the ONE model-selection control across the app.
 *
-* Provider first (CamStack / Frigate / Scrypted / Custom), then inside that
+* Provider first (CamStack / plus catalog / plugin catalog / Custom), then inside that
 * catalog the grouped Family→Tier→Variant selector when entries declare
 * `group`, else a flat `<select>`. The persisted value stays the flat model
 * id. `value === ''` renders nothing selected (callers that support an
@@ -39749,17 +39749,17 @@ function CopyButton({ value, label, srLabel, className, disabled }) {
 * fuzzy-match — case and separator-insensitive text search helper.
 *
 * Normalization rule: lowercase + strip all runs of hyphens, underscores and
-* whitespace entirely.  This makes `Tapparella cucina` and `tapparella-cucina`
-* both normalize to `tapparellacucina`, so a substring match succeeds in
+* whitespace entirely.  This makes `Tapparella kitchen` and `tapparella-kitchen`
+* both normalize to `tapparellakitchen`, so a substring match succeeds in
 * either direction.
 */
 /**
 * Strips hyphens, underscores and whitespace runs from `s` and lowercases it.
 *
 * @example
-* normalizeForSearch('Tapparella cucina') // 'tapparellacucina'
-* normalizeForSearch('tapparella-cucina') // 'tapparellacucina'
-* normalizeForSearch('tapparella_cucina') // 'tapparellacucina'
+* normalizeForSearch('Tapparella kitchen') // 'tapparellakitchen'
+* normalizeForSearch('tapparella-kitchen') // 'tapparellakitchen'
+* normalizeForSearch('tapparella_kitchen') // 'tapparellakitchen'
 */
 function normalizeForSearch(s) {
 	return s.toLowerCase().replace(/[-_\s]+/g, "");
@@ -39769,9 +39769,9 @@ function normalizeForSearch(s) {
 * form of `query`.  An empty query always matches.
 *
 * @example
-* fuzzyMatch('Tapparella cucina', 'tapparella-cucina') // true
-* fuzzyMatch('tapparella cucina', 'Tapparella-Cucina') // true
-* fuzzyMatch('xyz', 'tapparella-cucina')               // false
+* fuzzyMatch('Tapparella kitchen', 'tapparella-kitchen') // true
+* fuzzyMatch('tapparella kitchen', 'Tapparella-Kitchen') // true
+* fuzzyMatch('xyz', 'tapparella-kitchen')               // false
 */
 function fuzzyMatch(query, target) {
 	const nq = normalizeForSearch(query);

package/dist/index.js

@@ -13052,7 +13052,7 @@ var FACET_TRIGGER = "inline-flex max-w-full items-center gap-1 rounded-md border
 var FACET_ITEM = "flex h-7 w-full items-center gap-2 px-2 text-left text-xs text-foreground hover:bg-surface-hover";
 /**
 * One facet as a compact MULTI-select dropdown: closed it is one line
-* ("Location · Cucina, Salone"), open it lists every value with a check.
+* ("Location · Kitchen, Hall"), open it lists every value with a check.
 * The operator asked for dropdowns over rows of chips (2026-09-05): with
 * sixteen rooms and a dozen types the chips ate the panel.
 */
@@ -20412,7 +20412,7 @@ function CameraGridLayoutEditor({ deviceId }) {
 * The honest report. A grid's `high` composes its sources' `high` and its `low`
 * their `low`, so a profile is on offer only when EVERY source can serve it —
 * and the refusal names the source, because "this grid has no low" is not
-* something an operator can act on and "615 has no low" is.
+* something an operator can act on and "101 has no low" is.
 *
 * Read-only on purpose: what is on offer is decided by the source cameras'
 * assignments, and a control here would be a switch that writes nothing (D62).
@@ -23890,8 +23890,8 @@ function resolveClipsView(input, t = defaultUiText) {
 *  - **Four states are tellable apart**: loading, empty-with-a-cause,
 *    degraded-per-source, and each silent source in its own words. Every one
 *    of them used to render as "no clips", which is the defect this whole line
-*    of work is about — a camera with no SD card (640) is not quiet, and a
-*    camera whose own index disagrees with its own calendar (618, 6–20
+*    of work is about — a camera with no SD card (106) is not quiet, and a
+*    camera whose own index disagrees with its own calendar (108, 6–20
 *    September) is not quiet either.
 *
 * ## The period comes from the recording section's timebar, not a day picker
@@ -23944,7 +23944,7 @@ function resolveClipsView(input, t = defaultUiText) {
 * There is no "default" option and no empty value. This section used to send
 * no `provider` at all until the operator chose, because the cap documented
 * absence as "the device's bound provider, which is CamStack on every camera".
-* No code implemented that: measured on device 592 (2026-09-20, bound to
+* No code implemented that: measured on device 107 (2026-09-20, bound to
 * `recorder` AND `provider-reolink`) a bare `listClips` with `limit: 3`
 * answered SIX rows — three per source, merged — while the default option read
 * "CamStack recordings". The label named one thing and the query asked two.
@@ -31936,8 +31936,8 @@ function GroupedModelSelector({ catalog, value, onChange, disabled }) {
 //#region src/composites/model-picker.tsx
 var PROVIDER_LABEL = {
 	camstack: "CamStack",
-	frigate: "Frigate",
-	scrypted: "Scrypted",
+	frigate: "plus catalog",
+	scrypted: "plugin catalog",
 	custom: "Custom"
 };
 function providerOf(model) {
@@ -31946,7 +31946,7 @@ function providerOf(model) {
 /**
 * Shared model picker — the ONE model-selection control across the app.
 *
-* Provider first (CamStack / Frigate / Scrypted / Custom), then inside that
+* Provider first (CamStack / plus catalog / plugin catalog / Custom), then inside that
 * catalog the grouped Family→Tier→Variant selector when entries declare
 * `group`, else a flat `<select>`. The persisted value stays the flat model
 * id. `value === ''` renders nothing selected (callers that support an
@@ -39725,17 +39725,17 @@ function CopyButton({ value, label, srLabel, className, disabled }) {
 * fuzzy-match — case and separator-insensitive text search helper.
 *
 * Normalization rule: lowercase + strip all runs of hyphens, underscores and
-* whitespace entirely.  This makes `Tapparella cucina` and `tapparella-cucina`
-* both normalize to `tapparellacucina`, so a substring match succeeds in
+* whitespace entirely.  This makes `Tapparella kitchen` and `tapparella-kitchen`
+* both normalize to `tapparellakitchen`, so a substring match succeeds in
 * either direction.
 */
 /**
 * Strips hyphens, underscores and whitespace runs from `s` and lowercases it.
 *
 * @example
-* normalizeForSearch('Tapparella cucina') // 'tapparellacucina'
-* normalizeForSearch('tapparella-cucina') // 'tapparellacucina'
-* normalizeForSearch('tapparella_cucina') // 'tapparellacucina'
+* normalizeForSearch('Tapparella kitchen') // 'tapparellakitchen'
+* normalizeForSearch('tapparella-kitchen') // 'tapparellakitchen'
+* normalizeForSearch('tapparella_kitchen') // 'tapparellakitchen'
 */
 function normalizeForSearch(s) {
 	return s.toLowerCase().replace(/[-_\s]+/g, "");
@@ -39745,9 +39745,9 @@ function normalizeForSearch(s) {
 * form of `query`.  An empty query always matches.
 *
 * @example
-* fuzzyMatch('Tapparella cucina', 'tapparella-cucina') // true
-* fuzzyMatch('tapparella cucina', 'Tapparella-Cucina') // true
-* fuzzyMatch('xyz', 'tapparella-cucina')               // false
+* fuzzyMatch('Tapparella kitchen', 'tapparella-kitchen') // true
+* fuzzyMatch('tapparella kitchen', 'Tapparella-Kitchen') // true
+* fuzzyMatch('xyz', 'tapparella-kitchen')               // false
 */
 function fuzzyMatch(query, target) {
 	const nq = normalizeForSearch(query);

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/ui-library",
-  "version": "1.2.323",
+  "version": "1.2.324",
   "type": "module",
   "main": "dist/index.cjs",
   "module": "dist/index.js",