@camstack/system 1.2.389 → 1.2.391

package/dist/builtins/sqlite-storage/sqlite-pragmas.d.ts

@@ -1,139 +1,139 @@
 /**
- * Connection tuning for the hub's SQLite database.
- *
- * Every number here is sized against a MEASURED database, not a blog post.
- * On the live hub (2026-08-06), 20 Hz syscall sampling of hub-main put **210
- * of 2,561 samples inside `pread64`** — 161 on `camstack.db` and 49 on
- * `camstack.db-wal`, all 4 KiB page reads, i.e. page-cache misses. That is
- * 8.2% of wall-clock and ~20% during bursts, on the single thread that also
- * serves every tRPC request. fds 79/81 of hub-main were the two files, so the
- * cost is proven in-process rather than inferred.
- *
- * The database was **130 MB** with a **249 MB** WAL high-water mark. Its
- * tenants are not settings: the analytics event/track/media stores and the
- * sqlite-vec index all live in this one file.
- */
+* Connection tuning for the hub's SQLite database.
+*
+* Every number here is sized against a MEASURED database, not a blog post.
+* On the live hub (2026-08-06), 20 Hz syscall sampling of hub-main put **210
+* of 2,561 samples inside `pread64`** — 161 on `camstack.db` and 49 on
+* `camstack.db-wal`, all 4 KiB page reads, i.e. page-cache misses. That is
+* 8.2% of wall-clock and ~20% during bursts, on the single thread that also
+* serves every tRPC request. fds 79/81 of hub-main were the two files, so the
+* cost is proven in-process rather than inferred.
+*
+* The database was **130 MB** with a **249 MB** WAL high-water mark. Its
+* tenants are not settings: the analytics event/track/media stores and the
+* sqlite-vec index all live in this one file.
+*/
 /**
- * Page cache, in KiB (SQLite reads a NEGATIVE `cache_size` as KiB rather than
- * as a page count, which is what makes it independent of `page_size`).
- *
- * -65536 = **64 MiB**. Sized from the 130 MB file: the hot working set is the
- * B-tree interior pages plus the indexes the analytics queries walk, which is
- * a fraction of the total — 64 MiB covers roughly half the file outright, so a
- * repeated query stops re-reading the same 4 KiB pages from disk. Going to the
- * full 130 MB would buy the tail of a cold table scan for twice the resident
- * cost; going smaller leaves the measured miss rate roughly where it is.
- *
- * Why the build default is not enough: better-sqlite3 compiles with
- * `SQLITE_DEFAULT_CACHE_SIZE=-16000`, so the starting point is ~16 MiB — 8x
- * short of the file, not the ~2 MiB stock SQLite default. This is a 4x
- * increase, not a 32x one.
- *
- * Cost: 64 MiB of malloc'd C memory, ONE connection's worth (better-sqlite3
- * holds a single handle and the vector index shares it). It is off-heap, so it
- * does not move V8's heap ceiling — the thing that produced the hub's previous
- * OOM.
- */
+* Page cache, in KiB (SQLite reads a NEGATIVE `cache_size` as KiB rather than
+* as a page count, which is what makes it independent of `page_size`).
+*
+* -65536 = **64 MiB**. Sized from the 130 MB file: the hot working set is the
+* B-tree interior pages plus the indexes the analytics queries walk, which is
+* a fraction of the total — 64 MiB covers roughly half the file outright, so a
+* repeated query stops re-reading the same 4 KiB pages from disk. Going to the
+* full 130 MB would buy the tail of a cold table scan for twice the resident
+* cost; going smaller leaves the measured miss rate roughly where it is.
+*
+* Why the build default is not enough: better-sqlite3 compiles with
+* `SQLITE_DEFAULT_CACHE_SIZE=-16000`, so the starting point is ~16 MiB — 8x
+* short of the file, not the ~2 MiB stock SQLite default. This is a 4x
+* increase, not a 32x one.
+*
+* Cost: 64 MiB of malloc'd C memory, ONE connection's worth (better-sqlite3
+* holds a single handle and the vector index shares it). It is off-heap, so it
+* does not move V8's heap ceiling — the thing that produced the hub's previous
+* OOM.
+*/
 export declare const SQLITE_PAGE_CACHE_FLOOR_KIB = -65536;
 /**
- * Memory-mapped I/O window, in bytes. 268435456 = **256 MiB**.
- *
- * Chosen to exceed the 130 MB database with room for it to roughly double, so
- * the whole main file can be mapped. Pages then arrive as minor faults against
- * the OS page cache instead of `pread64` syscalls — which is precisely the
- * 161-sample half of the measurement. It also means a page evicted from
- * SQLite's own cache is usually still resident in the OS cache, so the two
- * knobs compound rather than duplicate.
- *
- * Two honest caveats:
- *  - SQLite **never mmaps the WAL**. The 49 WAL samples are not addressed
- *    here; they are addressed by keeping the WAL small (see
- *    {@link SQLITE_JOURNAL_SIZE_LIMIT_BYTES} and `wal-maintenance.ts`).
- *  - With mmap, an I/O error on a mapped page surfaces as SIGBUS rather than a
- *    catchable SQLite error. The pragma is asserted in
- *    `__tests__/sqlite-pragmas.spec.ts` by reading it back, so a build that
- *    ignores it (`SQLITE_MAX_MMAP_SIZE=0`) fails loudly instead of quietly
- *    doing nothing.
- */
+* Memory-mapped I/O window, in bytes. 268435456 = **256 MiB**.
+*
+* Chosen to exceed the 130 MB database with room for it to roughly double, so
+* the whole main file can be mapped. Pages then arrive as minor faults against
+* the OS page cache instead of `pread64` syscalls — which is precisely the
+* 161-sample half of the measurement. It also means a page evicted from
+* SQLite's own cache is usually still resident in the OS cache, so the two
+* knobs compound rather than duplicate.
+*
+* Two honest caveats:
+*  - SQLite **never mmaps the WAL**. The 49 WAL samples are not addressed
+*    here; they are addressed by keeping the WAL small (see
+*    {@link SQLITE_JOURNAL_SIZE_LIMIT_BYTES} and `wal-maintenance.ts`).
+*  - With mmap, an I/O error on a mapped page surfaces as SIGBUS rather than a
+*    catchable SQLite error. The pragma is asserted in
+*    `__tests__/sqlite-pragmas.spec.ts` by reading it back, so a build that
+*    ignores it (`SQLITE_MAX_MMAP_SIZE=0`) fails loudly instead of quietly
+*    doing nothing.
+*/
 export declare const SQLITE_MMAP_FLOOR_BYTES = 268435456;
 /**
- * Upper bound on the WAL file left on disk after a checkpoint resets it, in
- * bytes. 67108864 = **64 MiB**.
- *
- * This is the passive half of the WAL fix and it carries no stall risk at all:
- * it takes no lock and blocks nothing. It only says "when a checkpoint has
- * already succeeded, truncate the file rather than leaving the space
- * allocated". Without it, a WAL that spiked once stays spiked — which is how
- * a 130 MB database ends up with a 249 MB sidecar.
- *
- * 64 MiB is deliberately well above the ~4 MiB `wal_autocheckpoint` threshold
- * (1000 pages), so ordinary operation never touches this ceiling and the file
- * is not being repeatedly truncated and re-grown.
- */
+* Upper bound on the WAL file left on disk after a checkpoint resets it, in
+* bytes. 67108864 = **64 MiB**.
+*
+* This is the passive half of the WAL fix and it carries no stall risk at all:
+* it takes no lock and blocks nothing. It only says "when a checkpoint has
+* already succeeded, truncate the file rather than leaving the space
+* allocated". Without it, a WAL that spiked once stays spiked — which is how
+* a 130 MB database ends up with a 249 MB sidecar.
+*
+* 64 MiB is deliberately well above the ~4 MiB `wal_autocheckpoint` threshold
+* (1000 pages), so ordinary operation never touches this ceiling and the file
+* is not being repeatedly truncated and re-grown.
+*/
 export declare const SQLITE_JOURNAL_SIZE_LIMIT_BYTES = 67108864;
 /**
- * `synchronous` is deliberately NOT set here.
- *
- * better-sqlite3 compiles with `SQLITE_DEFAULT_WAL_SYNCHRONOUS=1`, so a WAL
- * database is **already** at `NORMAL`. Writing `PRAGMA synchronous = NORMAL`
- * would be a no-op that reads, forever after, like a durability decision
- * somebody made — the kind of leftover that is worse than nothing because it
- * looks like verification. `__tests__/sqlite-pragmas.spec.ts` asserts the
- * effective value instead, so a dependency bump that changes the default is
- * caught rather than assumed.
- *
- * **When it takes effect, measured (2026-08-08).** The WAL default is applied
- * when the WAL is actually opened — the first read/write transaction — NOT when
- * `PRAGMA journal_mode = WAL` runs. On a brand-new file the sequence reads:
- *
- *     after `journal_mode = WAL`, before any write   → 2 (FULL)
- *     after the first write                          → 1 (NORMAL)
- *
- * `initialize()` writes (`ensureTable`, `seedDefaults`) before anything can
- * observe the value, so production is at NORMAL on first boot and every boot
- * after. Recorded because reading the pragma immediately after setting the
- * journal mode reports FULL and looks exactly like a regression in this file.
- */
-export declare const SQLITE_SYNCHRONOUS_IS_BUILD_DEFAULT = true;
+* `synchronous` is deliberately NOT set here.
+*
+* better-sqlite3 compiles with `SQLITE_DEFAULT_WAL_SYNCHRONOUS=1`, so a WAL
+* database is **already** at `NORMAL`. Writing `PRAGMA synchronous = NORMAL`
+* would be a no-op that reads, forever after, like a durability decision
+* somebody made — the kind of leftover that is worse than nothing because it
+* looks like verification. `__tests__/sqlite-pragmas.spec.ts` asserts the
+* effective value instead, so a dependency bump that changes the default is
+* caught rather than assumed.
+*
+* **When it takes effect, measured (2026-08-08).** The WAL default is applied
+* when the WAL is actually opened — the first read/write transaction — NOT when
+* `PRAGMA journal_mode = WAL` runs. On a brand-new file the sequence reads:
+*
+*     after `journal_mode = WAL`, before any write   → 2 (FULL)
+*     after the first write                          → 1 (NORMAL)
+*
+* `initialize()` writes (`ensureTable`, `seedDefaults`) before anything can
+* observe the value, so production is at NORMAL on first boot and every boot
+* after. Recorded because reading the pragma immediately after setting the
+* journal mode reports FULL and looks exactly like a regression in this file.
+*/
+export declare const SQLITE_SYNCHRONOUS_IS_BUILD_DEFAULT: boolean;
 /**
- * This connection's `wal_autocheckpoint`, in pages. 10 000 = **ten times the
- * engine default**, ~40 MiB of WAL.
- *
- * The checkpoint is no longer this connection's job. Under `synchronous =
- * NORMAL` the fsyncs of a WAL database happen at the checkpoint and nowhere
- * else, and the engine's auto-checkpoint runs INSIDE the commit of whichever
- * writer crosses its threshold — so on the hub every 1000 frames (12–25 s) a
- * one-row `set` paid two fsyncs and a ~1000-page copy on the thread every
- * configuration read in the cluster queues behind, and paid 1–10 s for it
- * whenever the shared QLC drive was saturated (D449, measured in D452). The
- * checkpoint now runs on a worker thread over its own connection at the SAME
- * 1000-frame rule (`wal-checkpoint-policy.ts`), so the disk is asked for
- * the same number of syncs by a thread nobody waits on.
- *
- * Why not `0` (auto-checkpoint off): a worker that dies would leave the WAL
- * unbounded, and reads of a WAL page are `pread64`s the map never covers.
- * Ten times the default is a bound the worker never lets it reach — it is
- * the fallback, and `WalCheckpointer` logs an ERROR naming it the moment it
- * becomes the only checkpoint. `__tests__/sqlite-pragmas.spec.ts` reads the
- * value back.
- */
-export declare const SQLITE_WAL_AUTOCHECKPOINT_BOUND_PAGES = 10000;
+* This connection's `wal_autocheckpoint`, in pages. 10 000 = **ten times the
+* engine default**, ~40 MiB of WAL.
+*
+* The checkpoint is no longer this connection's job. Under `synchronous =
+* NORMAL` the fsyncs of a WAL database happen at the checkpoint and nowhere
+* else, and the engine's auto-checkpoint runs INSIDE the commit of whichever
+* writer crosses its threshold — so on the hub every 1000 frames (12–25 s) a
+* one-row `set` paid two fsyncs and a ~1000-page copy on the thread every
+* configuration read in the cluster queues behind, and paid 1–10 s for it
+* whenever the shared QLC drive was saturated (D449, measured in D452). The
+* checkpoint now runs on a worker thread over its own connection at the SAME
+* 1000-frame rule (`wal-checkpoint-policy.ts`), so the disk is asked for
+* the same number of syncs by a thread nobody waits on.
+*
+* Why not `0` (auto-checkpoint off): a worker that dies would leave the WAL
+* unbounded, and reads of a WAL page are `pread64`s the map never covers.
+* Ten times the default is a bound the worker never lets it reach — it is
+* the fallback, and `WalCheckpointer` logs an ERROR naming it the moment it
+* becomes the only checkpoint. `__tests__/sqlite-pragmas.spec.ts` reads the
+* value back.
+*/
+export declare const SQLITE_WAL_AUTOCHECKPOINT_BOUND_PAGES = 1e4;
 /**
- * Hard ceiling on the map, in bytes. 2 GiB.
- *
- * Not a memory budget — mapped pages are reclaimable — but a bound on how far
- * an unattended database may drift before somebody has to look at it. A file
- * past this is a retention problem and should be reported as one, not absorbed
- * silently by a wider window.
- */
+* Hard ceiling on the map, in bytes. 2 GiB.
+*
+* Not a memory budget — mapped pages are reclaimable — but a bound on how far
+* an unattended database may drift before somebody has to look at it. A file
+* past this is a retention problem and should be reported as one, not absorbed
+* silently by a wider window.
+*/
 export declare const SQLITE_MMAP_CEILING_BYTES: number;
 /**
- * Ceiling on SQLite's page cache, in KiB (negative — see
- * {@link SQLITE_PAGE_CACHE_FLOOR_KIB} for why the sign matters). 256 MiB.
- *
- * This is the number bounding unreclaimable growth, so it is the one that must
- * not be generous. Past it the answer is retention, not RAM.
- */
+* Ceiling on SQLite's page cache, in KiB (negative — see
+* {@link SQLITE_PAGE_CACHE_FLOOR_KIB} for why the sign matters). 256 MiB.
+*
+* This is the number bounding unreclaimable growth, so it is the one that must
+* not be generous. Past it the answer is retention, not RAM.
+*/
 export declare const SQLITE_PAGE_CACHE_CEILING_KIB = -262144;
 /** The `mmap_size` to apply for a database of this size, in bytes. */
 export declare function sqliteMmapSizeFor(fileSizeBytes: number): number;
@@ -141,51 +141,51 @@ export declare function sqliteMmapSizeFor(fileSizeBytes: number): number;
 export declare function sqlitePageCacheKibFor(fileSizeBytes: number): number;
 /** Page counters read straight off the connection, in the units SQLite reports. */
 export interface SqlitePageCounters {
-    readonly pageCount: number;
-    readonly freelistCount: number;
-    readonly pageSizeBytes: number;
+	readonly pageCount: number;
+	readonly freelistCount: number;
+	readonly pageSizeBytes: number;
 }
 /** How much of the file holds rows, and how much is free pages awaiting reuse. */
 export interface SqliteOccupancy {
-    readonly liveMb: number;
-    readonly freeMb: number;
-    readonly freePct: number;
+	readonly liveMb: number;
+	readonly freeMb: number;
+	readonly freePct: number;
 }
 /**
- * Split a database file into live bytes and free bytes.
- *
- * A file that stopped growing is not the same as a file that is full. SQLite
- * reuses freed pages but never returns them to the filesystem without a
- * `VACUUM`, so a database sitting at its high-water mark looks — from `stat`,
- * from `df`, from any measurement outside the connection — exactly like one
- * genuinely packed with rows. The two call for opposite actions: the first is
- * reclaimed by a VACUUM, the second means retention is not keeping up.
- *
- * `dbSizeMb` on the boot line could not tell them apart. This can, and it costs
- * three header reads on a connection that is already open.
- */
+* Split a database file into live bytes and free bytes.
+*
+* A file that stopped growing is not the same as a file that is full. SQLite
+* reuses freed pages but never returns them to the filesystem without a
+* `VACUUM`, so a database sitting at its high-water mark looks — from `stat`,
+* from `df`, from any measurement outside the connection — exactly like one
+* genuinely packed with rows. The two call for opposite actions: the first is
+* reclaimed by a VACUUM, the second means retention is not keeping up.
+*
+* `dbSizeMb` on the boot line could not tell them apart. This can, and it costs
+* three header reads on a connection that is already open.
+*/
 export declare function sqliteOccupancy(counters: SqlitePageCounters): SqliteOccupancy;
 /**
- * How often the connection re-checks whether the file has outgrown its map.
- *
- * The database grows by roughly 40 MB a day on this cluster, so five minutes is
- * far finer than it needs to be — but the check is three arithmetic operations
- * on a `stat`, and the failure it prevents is a node silently returning to
- * 418 synchronous page-ins per second. Cheap insurance against a slow leak.
- */
+* How often the connection re-checks whether the file has outgrown its map.
+*
+* The database grows by roughly 40 MB a day on this cluster, so five minutes is
+* far finer than it needs to be — but the check is three arithmetic operations
+* on a `stat`, and the failure it prevents is a node silently returning to
+* 418 synchronous page-ins per second. Cheap insurance against a slow leak.
+*/
 export declare const MAP_GROWTH_CHECK_INTERVAL_MS: number;
 /**
- * The new `mmap_size` when the file has outgrown the current one, or `null`.
- *
- * `sqliteMmapSizeFor` already autoscales to any user's database — but it is
- * applied when the connection OPENS and never again, which is the same bug one
- * level up: a file that grows during uptime keeps the map it had at boot. This
- * node escaped it only because 130 MB → 858 MB spanned seventeen days of
- * restarts; a node up for two months walks straight back into 70% of the file
- * outside the map.
- *
- * GROWTH only. Shrinking after a delete buys nothing and costs a remap, and the
- * file does not shrink without a `VACUUM` regardless — measured 2026-08-25,
- * `freePct=1` on an 858 MB file that had been deleting rows for days.
- */
+* The new `mmap_size` when the file has outgrown the current one, or `null`.
+*
+* `sqliteMmapSizeFor` already autoscales to any user's database — but it is
+* applied when the connection OPENS and never again, which is the same bug one
+* level up: a file that grows during uptime keeps the map it had at boot. This
+* node escaped it only because 130 MB → 858 MB spanned seventeen days of
+* restarts; a node up for two months walks straight back into 70% of the file
+* outside the map.
+*
+* GROWTH only. Shrinking after a delete buys nothing and costs a remap, and the
+* file does not shrink without a `VACUUM` regardless — measured 2026-08-25,
+* `freePct=1` on an 858 MB file that had been deleting rows for days.
+*/
 export declare function resolveMapGrowth(currentMmapBytes: number, fileSizeBytes: number): number | null;