@camstack/addon-provider-wyze 0.2.105 → 0.2.107

package/dist/addon.js

@@ -31,7 +31,7 @@ let net = require("net");
 net = __toESM(net, 1);
 let node_child_process = require("node:child_process");
 let node_tls = require("node:tls");
-//#region ../types/dist/event-category-ZyX6jcse.mjs
+//#region ../types/dist/event-category-BVDXG4tB.mjs
 var EventCategory = /* @__PURE__ */ function(EventCategory) {
 	EventCategory["SystemBoot"] = "system.boot";
 	EventCategory["SystemAddonsReady"] = "system.addons-ready";
@@ -648,6 +648,20 @@ var EventCategory = /* @__PURE__ */ function(EventCategory) {
 	* pull-reconcile from the provider's `getStatus` on reconnect. */
 	EventCategory["MeshNetworkChanged"] = "network.mesh.changed";
 	EventCategory["BackupCompleted"] = "backup.completed";
+	/**
+	* A whole backup RUN finished — every destination attempted, win or lose.
+	*
+	* `backup.completed` fires once per DESTINATION, which is the right grain for
+	* a progress UI and the wrong one for a notification: an operator with three
+	* destinations would be told three times. And a run where two of three
+	* destinations succeeded is not a clean success — a single "backup
+	* completed" that hid the failed one would be a lie, so the count of each is
+	* carried here and the message says both.
+	*
+	* Emitted by the backup orchestrator only after the destination loop, so a
+	* run that dies during the BUILD phase produces no completion at all.
+	*/
+	EventCategory["BackupRunCompleted"] = "backup.run-completed";
 	EventCategory["BackupRestored"] = "backup.restored";
 	EventCategory["NotificationDispatched"] = "notification.dispatched";
 	EventCategory["NotificationFailed"] = "notification.failed";
@@ -5378,7 +5392,7 @@ var ZodIssueCode = {
 var ZodFirstPartyTypeKind;
 ZodFirstPartyTypeKind || (ZodFirstPartyTypeKind = {});
 //#endregion
-//#region ../types/dist/sleep-DBKu2-U5.mjs
+//#region ../types/dist/sleep-BDR76Ykr.mjs
 /**
 * The audio chunk plane's byte format, and the ONE expansion from a coded
 * window to float samples (D455).
@@ -11522,6 +11536,87 @@ method(ListInputSchema, array(BrokerInfoSchema$1)), method(GetInputSchema, Broke
 	auth: "admin"
 }), method(GetStateInputSchema, unknown().nullable()), method(_void(), RegistryStatusSchema);
 DeviceType.Camera;
+/**
+* The signals a device can emit to WAKE its own stream.
+*
+* A camera whose stream is built on demand sleeps until something asks for it,
+* and "something" cannot be a consumer that is merely attached — a Frigate-style
+* puller holds a session open for ever, and treating that as demand would keep
+* a battery camera awake for ever, which is the whole thing the battery is for
+* (D173). So the wake has to come from the CAMERA: an event it noticed by
+* itself, with no stream running.
+*
+* ## The vocabulary is the PROVIDER'S, not ours
+*
+* Like `consumables`, this cap declares no vocabulary of its own. A provider
+* names each signal with a `code` it chooses and a `label` an operator reads.
+* Reolink offers motion and camera-native detection; another provider may offer
+* a tamper, a doorbell press, a PIR, or something no camera in this fleet has
+* yet. A fixed enum here would mean every new signal is a framework release.
+*
+* It is deliberately NOT derived from the caps a device already binds. Whether
+* a camera CAN push firmware motion is expressed by `motionSources` containing
+* `'onboard'`, and whether it does AI on-camera by the `native-object-detection`
+* binding — but both answer "what drives the detection pipeline", which is a
+* different question from "what may wake a sleeping stream". A camera can do
+* the first and not be trusted with the second, and the operator picks per
+* camera. Two questions, two authorities.
+*
+* ## Availability is not permission
+*
+* `listSignals` says what the device CAN emit. Whether a given signal actually
+* wakes the stream is the operator's per-camera choice, held by the broker
+* alongside the cooldown — see the stream-broker cap's wake settings. A
+* provider declaring a signal is not a provider enabling it.
+*/
+/** One signal a device can emit. */
+var StreamSignalSchema = object({
+	/** Stable id chosen by the provider, e.g. `'motion'`, `'person'`, `'tamper'`. */
+	code: string().min(1),
+	/** What an operator reads in the picker. The provider's own wording. */
+	label: string().min(1),
+	/**
+	* Whether the provider recommends this signal ON when a camera is first set
+	* up. A provider knows which of its signals are cheap and reliable; an
+	* operator should not have to discover that by trial. Reolink recommends
+	* both of its own.
+	*/
+	recommended: boolean()
+});
+var StreamSignalsStatusSchema = object({
+	signals: array(StreamSignalSchema),
+	lastFetchedAt: number()
+});
+var streamSignalsCapability = {
+	name: "stream-signals",
+	scope: "device",
+	deviceNative: true,
+	mode: "singleton",
+	deviceTypes: Object.values(DeviceType),
+	runtimeState: StreamSignalsStatusSchema,
+	/**
+	* Runtime-state durability: **session** — mirrored in RAM, never written.
+	*
+	* The slice holds what the DEVICE says it can emit. That is a probed fact,
+	* not an operator choice: the provider re-declares it on every registration,
+	* so losing it loses nothing and persisting it would freeze an answer the
+	* camera is entitled to change. Measured the same day on the sibling case —
+	* `native-object-detection.supportedClasses` was persisted, and a firmware
+	* class the camera really detected stayed missing for the life of the row
+	* because the fix could not reach it.
+	*
+	* See `RuntimeStateDurability`. Enforced by
+	* `scripts/check-runtime-state-durability.ts`.
+	*/
+	durability: "session",
+	methods: { 
+	/**
+	* What this device can emit. Empty is a valid and common answer — most
+	* cameras have nothing to offer here, and an empty list is what makes the
+	* broker's picker show nothing rather than a false choice.
+	*/
+listSignals: method(_void(), array(StreamSignalSchema).readonly()) }
+};
 /** Stream delivery format. (Relocated from the retired `streaming-engine` cap.) */
 var StreamFormatSchema = _enum([
 	"webrtc",
@@ -11918,6 +12013,22 @@ var EgressTranscodeSchema = object({
 	camStreamId: string().nullable()
 });
 method(object({
+	deviceId: number().int().nonnegative(),
+	/** The provider's signal code. */
+	code: string().min(1),
+	/** Ms epoch. Absent ⇒ now. */
+	at: number().optional()
+}), object({
+	/** Whether the broker acted on it, and if not, why. */
+	accepted: boolean(),
+	reason: _enum([
+		"woke",
+		"hold-extended",
+		"not-enabled",
+		"no-consumer",
+		"unknown-code"
+	])
+}), { kind: "mutation" }), method(object({
 	deviceId: number().int().nonnegative(),
 	camStreamId: string().min(1),
 	kind: CamStreamKindSchema,
@@ -12172,6 +12283,16 @@ var PickStreamRequirementsSchema = object({
 	acceptCodecs: array(StreamCodecSchema).readonly().optional(),
 	/** Minimum vertical resolution. Streams shorter than this are dropped. */
 	minHeight: number().int().positive().optional(),
+	/**
+	* Maximum vertical resolution. Streams TALLER than this are dropped.
+	*
+	* A consumer can have a ceiling as real as its floor: Alexa documents
+	* 480p to 1080p, and a 4K stream is as unusable to an Echo as a 360p one.
+	* Without this the ceiling had to be re-implemented by every caller — and
+	* one caller implementing it privately is how a second scoring authority
+	* gets born.
+	*/
+	maxHeight: number().int().positive().optional(),
 	/** Minimum horizontal resolution. */
 	minWidth: number().int().positive().optional(),
 	/**
@@ -12188,7 +12309,22 @@ var PickStreamRequirementsSchema = object({
 	* transcoded" guard: if the device is already serving the consumer's
 	* codec end-to-end, there's nothing to optimise.
 	*/
-	requireSiblingCodec: array(StreamCodecSchema).readonly().optional()
+	requireSiblingCodec: array(StreamCodecSchema).readonly().optional(),
+	/**
+	* Whether a stream the consumer CANNOT decode may still be picked, on the
+	* understanding that it will be transcoded.
+	*
+	* Default `false` — today's behaviour, and the right one for a bypass
+	* question ("is there a stream I can forward untouched?"). Set `true` to
+	* ask the larger question: "what is the best stream for me, transcoding if
+	* I must?" A stream that satisfies `acceptCodecs` always outranks one that
+	* does not, so a passthrough is never lost to a transcode; the answer says
+	* which it is in {@link PickedCamStreamSchema.transcodes}.
+	*
+	* This is what lets one picker serve both the bypass and the full source
+	* choice, instead of a consumer scoring privately when the bypass misses.
+	*/
+	allowTranscode: boolean().optional()
 }).readonly();
 var PickStreamPreferencesSchema = object({
 	/**
@@ -12202,12 +12338,32 @@ var PickStreamPreferencesSchema = object({
 	* picks the tallest stream; `'lowest'` picks the shortest (used by
 	* memory-constrained consumers / Apple Home guest sessions).
 	*/
-	resolutionPreference: _enum(["highest", "lowest"]).optional()
+	resolutionPreference: _enum(["highest", "lowest"]).optional(),
+	/**
+	* The height the consumer actually wants to DELIVER.
+	*
+	* Not a constraint — an ordering. With it set, the SMALLEST stream at or
+	* above the target wins, and only if nothing reaches it does the tallest
+	* take over. Pulling 1296 lines to draw 720 on a 1280x800 Echo panel costs
+	* a decode and buys nothing, and `resolutionPreference: 'highest'` cannot
+	* express that: it says "as big as possible", which is a different wish.
+	*
+	* Ignored when absent, so every existing caller keeps its ordering.
+	*/
+	targetHeight: number().int().positive().optional()
 }).readonly();
 var PickedCamStreamSchema = object({
 	camStreamId: string(),
 	codec: string().optional(),
 	resolution: CamStreamResolutionSchema.optional(),
+	/**
+	* Whether serving this stream requires a decode + re-encode.
+	*
+	* `false` is a stream the consumer can take as it stands. Only ever `true`
+	* when the caller asked for it with `allowTranscode`, so a caller that did
+	* not ask cannot be handed a cost it never agreed to pay.
+	*/
+	transcodes: boolean(),
 	/** One-line explanation of why this stream won — for logs / debug UI. */
 	reason: string()
 });
@@ -16741,6 +16897,8 @@ var NcSystemEventKindSchema = _enum([
 	"device-enabled",
 	"device-battery-low",
 	"device-battery-normal",
+	"device-consumable-low",
+	"device-consumable-normal",
 	"stream-online",
 	"stream-offline",
 	"node-online",
@@ -16759,6 +16917,7 @@ var NcSystemEventKindSchema = _enum([
 	"addon-updated",
 	"server-updated",
 	"export-completed",
+	"backup-completed",
 	"camera-online",
 	"camera-offline",
 	"camera-disabled",
@@ -18081,6 +18240,48 @@ var NcAlarmConfigSchema = object({
 	settings: NcAlarmSettingsSchema,
 	coverage: array(NcAlarmModeCoverageSchema)
 });
+/**
+* ONE rule's demand on ONE camera's clip ring.
+*
+* A rule, not a camera: the broker takes the MAX over the asks that reach a
+* camera, so the answer stays a faithful description of the rules and the
+* bounding (the byte budget, the broker's own ceiling) stays where the cost
+* lives. A camera that appears in no ask is being told **nothing** — which is
+* a different thing from never having been told, and only the envelope
+* (`rulesLoaded`) can tell those apart.
+*/
+var NcClipRetentionAskSchema = object({
+	/**
+	* The camera this ask is about. **Absent = every camera**, which is what a
+	* rule with no `conditions.devices` means: it can fire anywhere, so it is
+	* asking everywhere.
+	*/
+	deviceId: number().int().nonnegative().optional(),
+	/** Seconds of history the rule needs held for it. Never zero — a rule that
+	*  needs nothing produces no ask at all. */
+	seconds: number().min(0).max(60),
+	/** The profile the rule cuts from, when it named one. Absent = the cheapest
+	*  assigned, which is what the cut defaults to. */
+	profile: CamProfileSchema.optional(),
+	/** Who is asking — so a retention the operator did not expect names a rule. */
+	ruleId: string(),
+	ruleName: string(),
+	/** Why this many seconds: the rule's own window, or the occupancy ceiling. */
+	reason: _enum(["window", "occupancy"])
+});
+/**
+* The whole answer, with the one bit that keeps absence from reading as zero.
+*
+* `rulesLoaded` is false until the rule ledger has completed a load at least
+* once. A centre that is up but has not read its rules yet answers with an
+* empty ask list that means nothing at all — applying it would drop every
+* camera's ring to zero for the first events after a restart, which is the
+* footage this mechanism exists to keep.
+*/
+var NcClipRetentionPlanSchema = object({
+	rulesLoaded: boolean(),
+	asks: array(NcClipRetentionAskSchema).readonly()
+});
 method(object({}), object({ rules: array(NcRuleSchema) }), { auth: "admin" }), method(object({ ruleId: string() }), object({ rule: NcRuleSchema.nullable() }), { auth: "admin" }), method(object({ rule: NcRuleInputSchema }), object({ rule: NcRuleSchema }), {
 	kind: "mutation",
 	auth: "admin",
@@ -18101,7 +18302,7 @@ method(object({}), object({ rules: array(NcRuleSchema) }), { auth: "admin" }), m
 }), object({ success: literal(true) }), {
 	kind: "mutation",
 	auth: "admin"
-}), method(object({}), object({ mutedDeviceIds: array(number().int()).readonly() }), { auth: "admin" }), method(object({
+}), method(object({}), NcClipRetentionPlanSchema, { auth: "admin" }), method(object({}), object({ mutedDeviceIds: array(number().int()).readonly() }), { auth: "admin" }), method(object({
 	deviceId: number().int(),
 	muted: boolean()
 }), object({ success: literal(true) }), {
@@ -20675,6 +20876,33 @@ var RunReplayFrameProcessorResultSchema = object({ tracks: array(object({
 	*  solid is this track", cheaper than re-deriving it from a trajectory. */
 	framesMatched: number().int()
 })).readonly() });
+/**
+* The long-term series a camera produces. A closed union so a typo cannot
+* invent one, and the ONE declaration of it — the addon's `AnalyticsLtsSeries`
+* is an alias of this, not a second list.
+*/
+var AnalyticsLtsSeriesSchema = _enum([
+	"motion",
+	"audio-dbfs",
+	"battery",
+	"occupancy"
+]);
+/**
+* One closed 5-minute bucket of a long-term series.
+*
+* `samples` is how many readings the bucket folded — it is the ACTIVITY for a
+* series like `motion`, and the confidence for one like `occupancy`. A bucket
+* that exists at all was measured; a bucket that is absent was not, which is a
+* different claim from zero and the reason this is a sparse series.
+*/
+var LtsBucketSchema = object({
+	scope: string(),
+	bucketStart: number().int(),
+	samples: number().int().nonnegative(),
+	sum: number(),
+	min: number(),
+	max: number()
+});
 DeviceType.Camera, method(object({ deviceId: number() }), array(TrackSchema).readonly()), method(object({
 	deviceId: number(),
 	trackId: string()
@@ -20721,6 +20949,14 @@ DeviceType.Camera, method(object({ deviceId: number() }), array(TrackSchema).rea
 	kinds: array(string()).optional(),
 	limit: number().int().min(1).max(MAX_EVENT_QUERY_LIMIT).default(DEFAULT_EVENT_QUERY_LIMIT)
 }), array(SensorEventSchema).readonly()), method(KeyEventQueryInput, array(KeyEventSchema).readonly()), method(KeyEventBatchQueryInput, array(KeyEventsForDeviceSchema).readonly()), method(object({
+	deviceId: number(),
+	series: AnalyticsLtsSeriesSchema,
+	/** Omit for EVERY scope of this series in the range. */
+	scope: string().optional(),
+	from: number(),
+	to: number(),
+	limit: number().int().positive().optional()
+}), array(LtsBucketSchema).readonly()), method(object({
 	deviceId: number(),
 	since: number(),
 	until: number(),
@@ -21339,6 +21575,14 @@ var MotionSourceEnum = _enum([
 */
 var MotionSourcesSchema = array(MotionSourceEnum);
 /**
+* Which root detectors a camera runs. Deliberately the SAME vocabulary
+* post-analysis already tags every detection with (`DetectionSource`) rather
+* than a second spelling of the same two ideas — the value an operator picks
+* here is the value that comes back on the track, the overlay and the debug
+* row.
+*/
+var DetectionSourcesSchema = array(DetectionSourceSchema);
+/**
 * Input shape for `pipeline-runner.reportMotion` cap method. Exported
 * so cap-side consumers (the orchestrator forward, the runner addon's
 * cap implementation, tests) can reuse the type instead of redeclaring
@@ -21489,6 +21733,35 @@ var RunnerCameraConfigSchema = object({
 	*   events; the orchestrator forwards to `reportMotion`.
 	*/
 	motionSources: MotionSourcesSchema.default(["analyzer"]),
+	/**
+	* WHICH root detector runs for this camera. The detection counterpart of
+	* {@link motionSources}, same shape and same discipline: a per-camera list
+	* of sources the system understands, vendor-agnostic, owned here.
+	*
+	* - `pipeline` — this runner's own root step on decoded pixels (`steps`).
+	* - `onboard` — the CAMERA's own detector, admitted only when it is named
+	*   here. Its boxes reach post-analysis on the same
+	*   `PipelineInferenceResult` payload as the pipeline's, so an onboard-born
+	*   track gets the same tracker, the same overlay and the same detail
+	*   subtree (face / plate / embedding).
+	*
+	* `['onboard']` alone is the REPLACEMENT: this runner's root step does not
+	* run, and that is where a camera with a usable onboard detector buys back
+	* its share of the accelerator. It saves the root inference, not the decode
+	* — the detail subtree still needs pixels to cut crops from.
+	*
+	* A camera whose onboard detections carry no geometry cannot serve as a root
+	* step at all (there is nothing to track), and the cap that knows this says
+	* so on `native-object-detection.getOptions().geometry`. On Reolink that is
+	* every battery camera: the boxes ride a sub-stream a battery camera never
+	* attaches, so such a camera stays on `['pipeline']` and its onboard AI is
+	* worth exactly what it already is — a wake signal with a class.
+	*
+	* Defaults to `['pipeline']`, which is byte-for-byte today's behaviour: a
+	* vendor never turns a detector on for the operator, and neither does a
+	* default.
+	*/
+	detectionSources: DetectionSourcesSchema.default(["pipeline"]),
 	pipelineEnabled: boolean().default(true),
 	/** Ordered tree of video steps. Absent → runner skips video detection. */
 	steps: array(PipelineStepInputSchema).readonly().optional(),
@@ -21670,7 +21943,47 @@ var RunnerLocalMetricsSchema = object({
 	queueDepth: number(),
 	frameLazy: FrameLazyMetricsSchema.optional()
 });
+/**
+* Pipeline Runner capability — runtime detection workhorse.
+*
+* One instance per node. Receives camera assignments from
+* `addon-pipeline-orchestrator`, subscribes to the local stream-broker for
+* decoded frames, drains motion + detection queues, calls the local
+* `motion-detection` and `pipeline-executor` capabilities, and emits typed
+* `pipeline.inference-result` and `detection.motion-analysis` events on
+* the bus.
+*
+* Distinct from `pipeline-orchestrator` (the hub-side load balancer) — the
+* runner has zero knowledge of other agents, no global state, and never
+* makes assignment decisions itself.
+*/
+/**
+* Why a runner declined to look at a camera out of band. Named rather than a
+* bare `false`: a camera asleep on battery (D173), one attached elsewhere, one
+* already mid-session and one already bursting are four different facts, and a
+* caller told only "no" cannot tell a protection from a bug.
+*/
+var OccupancyBurstRefusalSchema = _enum([
+	"not-attached",
+	"battery-asleep",
+	"not-watching",
+	"already-bursting"
+]);
 method(RunnerCameraConfigSchema, object({ success: literal(true) }), { kind: "mutation" }), method(object({ deviceId: number() }), object({ success: literal(true) }), { kind: "mutation" }), method(ReportMotionInputSchema, object({ success: literal(true) }), { kind: "mutation" }), method(_void(), RunnerLocalLoadSchema), method(_void(), RunnerLocalMetricsSchema), method(object({ deviceId: number() }), CameraMetricsSchema.nullable()), method(_void(), array(CameraMetricsWithDeviceIdSchema).readonly()), method(_void(), array(number()).readonly()), method(object({
+	deviceId: number(),
+	/** How many frames to collect. The caller sizes this against what its
+	*  own confirmation needs; the runner clamps it to the field's range. */
+	frames: number().int().positive().optional(),
+	/** Why, for the log. A burst nobody can attribute is a cost nobody can
+	*  defend — the periodic one at least has a timer to point at. */
+	reason: string()
+}), object({
+	started: boolean(),
+	refusedBecause: OccupancyBurstRefusalSchema.optional()
+}), {
+	auth: "admin",
+	kind: "mutation"
+}), method(object({
 	handle: FrameHandleSchema,
 	bbox: NativeCropBboxSchema,
 	maxWidth: number().int().positive().optional(),
@@ -24144,10 +24457,28 @@ DeviceType.Camera, method(object({ deviceId: number().int().nonnegative() }), ar
 }), boolean()), method(object({
 	deviceId: number().int().nonnegative(),
 	sessionId: string()
-}), object({ pendingRenegotiation: object({
-	target: WebrtcStreamTargetSchema,
-	epoch: number()
-}).nullable() }));
+}), object({
+	pendingRenegotiation: object({
+		target: WebrtcStreamTargetSchema,
+		epoch: number()
+	}).nullable(),
+	/**
+	* Whether the session still EXISTS.
+	*
+	* A consumer that holds a resource for the life of a session needs to
+	* be able to ask, because a session does not always end the way it
+	* began. Measured on this hub 2026-09-13: an Echo that got stuck never
+	* sent `SessionDisconnected`, so the Alexa exporter's
+	* `releaseEgressTranscode` never ran, and a 2304x1296 HEVC to 720p
+	* H.264 transcode kept running for NOBODY for more than twenty
+	* minutes. The WebRTC session had logged `WebRTC session closed`
+	* minutes earlier — the broker knew; the holder had no way to ask.
+	*
+	* `false` for a session id the provider has never heard of, which is
+	* the same answer as "it ended": either way nothing is holding it up.
+	*/
+	alive: boolean()
+}));
 object({
 	/** All accessory children of the parent. */
 	childDeviceIds: array(number()).readonly(),
@@ -28594,11 +28925,46 @@ var NativeObjectDetectionStatusSchema = object({
 	supportedClasses: array(NativeObjectClassEnum).readonly(),
 	/**
 	* Whether forwarding of onboard AI detections is enabled for this device.
-	* Default FALSE (opt-in, cold-start) — onboard AI pushes are noisy/sparse and
-	* churn the tracker, so forwarding stays off until the operator enables it.
+	*
+	* Cold-start OFF on every camera. A vendor does not decide which detector a
+	* camera runs — that is the operator's choice, and it is made where every
+	* other detection choice is made. `geometry` on
+	* {@link NativeObjectDetectionOptionsSchema} is how the form says what the
+	* choice would buy this particular camera.
 	*/
 	enabled: boolean()
 });
+/**
+* WHEN a camera's onboard detections carry geometry.
+*
+* - `boxed` — always. The provider holds a standing channel for the boxes, so
+*   a detection is a trackable subject whenever the camera sees one.
+* - `while-streaming` — only while some stream of this camera is already open.
+*   The boxes ride the video's own side-channel rather than a feed of their
+*   own, so they cost nothing and they exist only when something is pulling.
+*   On Reolink this is every BATTERY camera: a persistent second feed is real
+*   radio drain, but a camera that is awake is awake precisely because
+*   something is in front of it, and its stream is already being pulled.
+* - `flag-only` — never. The firmware ships the class and nothing else; the
+*   pipeline needs geometry to make a subject, so such a push reaches the
+*   tracker as motion and no further.
+*
+* Reported and not inferred, because the operator's question in front of the
+* picker is "what do I get", and these are three different answers (D14: the
+* derived form is only as honest as `getOptions`).
+*/
+var NativeObjectGeometryEnum = _enum([
+	"boxed",
+	"while-streaming",
+	"flag-only"
+]);
+var NativeObjectDetectionOptionsSchema = object({
+	/** Classes this firmware can detect — the same list the status reports. */
+	supportedClasses: array(NativeObjectClassEnum).readonly(),
+	/** What a detection from this camera carries. */
+	geometry: NativeObjectGeometryEnum
+});
+var NativeObjectDetectionSettingsPatchSchema = object({ enabled: boolean().optional() });
 var NativeObjectDetectionRuntimeStateSchema = NativeObjectDetectionStatusSchema.extend({ 
 /** Required by createRuntimeStateBridge — epoch ms of last refresh. */
 lastFetchedAt: number() });
@@ -28608,13 +28974,23 @@ var nativeObjectDetectionCapability = {
 	deviceNative: true,
 	mode: "singleton",
 	deviceTypes: [DeviceType.Camera],
-	methods: { setEnabled: method(object({
-		deviceId: number(),
-		enabled: boolean()
-	}), _void(), {
-		kind: "mutation",
-		auth: "admin"
-	}) },
+	methods: {
+		getOptions: method(object({ deviceId: number() }), NativeObjectDetectionOptionsSchema),
+		setSettings: method(object({
+			deviceId: number(),
+			settings: NativeObjectDetectionSettingsPatchSchema
+		}), _void(), {
+			kind: "mutation",
+			auth: "admin"
+		}),
+		setEnabled: method(object({
+			deviceId: number(),
+			enabled: boolean()
+		}), _void(), {
+			kind: "mutation",
+			auth: "admin"
+		})
+	},
 	events: { onDetected: { data: object({
 		deviceId: number(),
 		detection: NativeDetectionSchema
@@ -33462,7 +33838,28 @@ var PerScopeBreakdownSchema = object({
 	/** Total tracked objects in this scope (frame / zone / unzoned). */
 	totalObjects: number().int().nonnegative(),
 	/** Per-class count. Keys are macro class names (e.g. `person`, `car`). */
-	byClass: record(string(), number().int().nonnegative())
+	byClass: record(string(), number().int().nonnegative()),
+	/**
+	* Of `totalObjects`, how many are STANDING — objects the census holds,
+	* present but not going anywhere (a parked car, a bin, a statue).
+	*
+	* The operator's question about a scene has two halves and they answer
+	* different things: "what is parked here" is stable for hours and must not
+	* flap, while "who is walking through" is the thing an alert is about. One
+	* number could only serve one of them, and `totalObjects` served the first
+	* badly — a passer-by moved it and every occupancy rule saw a change.
+	*
+	* `standing + transient === totalObjects`, always. The total keeps its old
+	* meaning exactly, so no rule written against it changes behaviour.
+	*
+	* ABSENT means UNKNOWN, never zero (D393): a snapshot from a node older than
+	* this field cannot say, and a reader that folds absence in as 0 reports "no
+	* parked objects here" about a camera whose lot is full.
+	*/
+	standingObjects: number().int().nonnegative().optional(),
+	/** Of `totalObjects`, how many are passing through. See `standingObjects` —
+	*  same absence rule. */
+	transientObjects: number().int().nonnegative().optional()
 });
 var ZoneScopeBreakdownSchema = PerScopeBreakdownSchema.extend({
 	zoneId: string(),
@@ -33585,6 +33982,23 @@ var HistoryPointSchema = object({
 * triple covers the three spatial scopes (per-zone, frame-wide,
 * outside-any-zone). Crossing them with `className?` gives the full
 * combinatorial coverage the operator UI requested.
+*
+* ## ⚠️ The three history methods are DEPRECATED
+*
+* They are served from a 60-MINUTE in-memory ring. It dies with the process,
+* so after a restart they report nothing about a night that did happen, and any
+* window past an hour is silently clamped — a caller cannot tell a clamp from
+* an empty scene. The presets in the occupancy chart existed to hide that
+* horizon rather than to answer a question.
+*
+* Use `pipelineAnalytics.readLongTermSeries({ series: 'occupancy', scope })`
+* instead. Those rows are already written for every camera, ~60 bytes per
+* (camera, scope, 5-minute bucket), kept for a year, and survive a restart.
+* Spell the scope with `occupancyScope(zoneId?, className?)` — the same
+* function the writer uses, so the two cannot drift.
+*
+* The ring stays until these three go, and it is the only thing left reading
+* it. Do not add a fourth caller.
 */
 var zoneAnalyticsCapability = {
 	name: "zone-analytics",
@@ -34074,6 +34488,7 @@ var DEVICE_LOCAL_STATE_CAPS = {
 	smoke: smokeCapability,
 	streamCatalog: streamCatalogCapability,
 	streamParams: streamParamsCapability,
+	streamSignals: streamSignalsCapability,
 	switch: switchCapability,
 	tamper: tamperCapability,
 	temperatureSensor: temperatureSensorCapability,
@@ -37983,12 +38398,24 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"nativeObjectDetection.getOptions": {
+		capName: "native-object-detection",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"nativeObjectDetection.setEnabled": {
 		capName: "native-object-detection",
 		capScope: "device",
 		addonId: null,
 		access: "create"
 	},
+	"nativeObjectDetection.setSettings": {
+		capName: "native-object-detection",
+		capScope: "device",
+		addonId: null,
+		access: "create"
+	},
 	"navigation.getFeatures": {
 		capName: "navigation",
 		capScope: "device",
@@ -38253,6 +38680,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"notificationRules.getClipRetentionAsks": {
+		capName: "notification-rules",
+		capScope: "system",
+		addonId: null,
+		access: "view"
+	},
 	"notificationRules.getConditionCatalog": {
 		capName: "notification-rules",
 		capScope: "system",
@@ -38763,6 +39196,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"pipelineAnalytics.readLongTermSeries": {
+		capName: "pipeline-analytics",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"pipelineAnalytics.rebuildObjectEmbeddings": {
 		capName: "pipeline-analytics",
 		capScope: "device",
@@ -39435,6 +39874,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"pipelineRunner.requestOccupancyBurst": {
+		capName: "pipeline-runner",
+		capScope: "system",
+		addonId: null,
+		access: "create"
+	},
 	"pipelineRunner.runDetailSubtree": {
 		capName: "pipeline-runner",
 		capScope: "system",
@@ -40647,6 +41092,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"streamBroker.reportStreamSignal": {
+		capName: "stream-broker",
+		capScope: "system",
+		addonId: null,
+		access: "create"
+	},
 	"streamBroker.restartProfile": {
 		capName: "stream-broker",
 		capScope: "system",
@@ -40731,6 +41182,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"streamSignals.listSignals": {
+		capName: "stream-signals",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"switch.setState": {
 		capName: "switch",
 		capScope: "device",
@@ -42203,11 +42660,21 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"nativeObjectDetection.getOptions": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"nativeObjectDetection.setEnabled": [{
 		name: "deviceId",
 		form: "single",
 		optional: false
 	}],
+	"nativeObjectDetection.setSettings": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"navigation.getFeatures": [{
 		name: "deviceId",
 		form: "single",
@@ -42557,6 +43024,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"pipelineAnalytics.readLongTermSeries": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"pipelineAnalytics.rebuildObjectEmbeddings": [{
 		name: "deviceId",
 		form: "single",
@@ -42747,6 +43219,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"pipelineRunner.requestOccupancyBurst": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"pipelineRunner.runDetailSubtree": [{
 		name: "deviceId",
 		form: "single",
@@ -43103,6 +43580,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"streamBroker.reportStreamSignal": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"streamBroker.restartProfile": [{
 		name: "deviceId",
 		form: "single",