@camstack/addon-provider-reolink 1.2.202 → 1.2.204

package/i18n/en.json

@@ -1,45 +1,42 @@
 {
   "discoveryParams.s_credentials.title": "Credentials",
-  "discoveryParams.s_credentials.description": "Used to probe the cameras and pre-filled into each result so you can add it in one click. Assumes all cameras share these credentials.",
+  "discoveryParams.s_credentials.description": "Assumes all cameras share these credentials.",
   "discoveryParams.s_credentials.username.label": "Username",
   "discoveryParams.s_credentials.password.label": "Password",
   "discoveryParams.s_scan.title": "Scan options",
-  "discoveryParams.s_scan.description": "Leave the network blank to scan the local subnet. To find cameras on a different subnet, enter its CIDR (e.g. 192.168.20.0/24).",
+  "discoveryParams.s_scan.description": "Leave blank to scan the local subnet; for another subnet enter its CIDR (e.g. 192.168.20.0/24).",
   "discoveryParams.s_scan.networkCidr.label": "Network (CIDR)",
   "discoveryParams.s_scan.enableOnvif.label": "Include ONVIF discovery",
   "discoveryParams.s_scan.timeoutMs.label": "Scan timeout (ms)",
   "creation.s_identity.title": "Camera",
   "creation.s_identity.name.label": "Name",
   "creation.s_credentials.title": "Credentials",
-  "creation.s_credentials.description": "Required for the autodetect probe — entered before the host so Test can run immediately.",
   "creation.s_credentials.username.label": "Username",
   "creation.s_credentials.password.label": "Password",
   "creation.s_connection.title": "Connection",
-  "creation.s_connection.description": "Click Test to auto-detect the device type (regular camera / NVR / battery / UDP-only). The detected type is then used at save time.",
   "creation.s_connection.transport.label": "Connection mode",
-  "creation.s_connection.transport.description": "Auto: try TCP first, fall back to UDP — best for unknown devices. UDP is required for battery cameras behind NAT.",
+  "creation.s_connection.transport.description": "Auto tries TCP, then UDP. Battery cameras behind NAT need UDP.",
   "creation.s_connection.transport.o_auto.label": "Auto (recommended)",
   "creation.s_connection.transport.o_tcp.label": "TCP only",
   "creation.s_connection.transport.o_udp.label": "UDP only (battery / cloud)",
   "creation.s_connection.host.label": "Host (IP / hostname / UID)",
-  "creation.s_connection.host.description": "For UDP-only mode you can leave the host blank and supply the camera UID below — the library will discover it on the network.",
+  "creation.s_connection.host.description": "In UDP-only mode leave blank and use the UID below.",
   "creation.s_connection.port.label": "Port",
-  "creation.s_connection.port.description": "Baichuan port. Default 9000 — applies to TCP. Ignored for UDP transport.",
   "creation.s_connection.uid.label": "Device UID",
-  "creation.s_connection.uid.description": "Required for battery / UDP cameras when not on the same LAN. Optional for local-direct UDP discovery and ignored for pure TCP.",
+  "creation.s_connection.uid.description": "Needed for battery / UDP cameras that are not on the same LAN.",
   "emailPushSettings.s_email-push.title": "Battery-cam Motion (Email/SMTP Push)",
-  "emailPushSettings.s_email-push.description": "Emulate an SMTP server that battery Reolink cameras push to on motion. Lets you capture motion from sleeping battery cams without polling them awake. Enable, then use \"Auto-configure email push\" on each battery camera.",
+  "emailPushSettings.s_email-push.description": "Lets battery cameras report motion by email without being woken.",
   "emailPushSettings.s_email-push.emailPushEnabled.label": "Enable Email Push Server",
   "emailPushSettings.s_email-push.emailPushRecommendedHost.label": "Camera-facing host",
   "emailPushSettings.s_email-push.emailPushPort.label": "SMTP Port",
   "emailPushSettings.s_email-push.emailPushDomain.label": "Virtual Domain",
   "emailPushSettings.s_email-push-auth.title": "Email Push Authentication",
-  "emailPushSettings.s_email-push-auth.description": "AUTH credentials the camera must present. Reolink firmwares are more reliable with AUTH on. Random values are generated on first boot — re-run Auto-configure on cameras after changing them.",
+  "emailPushSettings.s_email-push-auth.description": "Random values are generated on first boot; re-run Auto-configure on cameras after changing them.",
   "emailPushSettings.s_email-push-auth.emailPushRequireAuth.label": "Require AUTH",
   "emailPushSettings.s_email-push-auth.emailPushAuthUsername.label": "Auth Username",
   "emailPushSettings.s_email-push-auth.emailPushAuthPassword.label": "Auth Password",
   "baichuanWebhookSettings.s_baichuan-webhook.title": "Battery-cam Motion (HaCfg Webhook)",
-  "baichuanWebhookSettings.s_baichuan-webhook.description": "HTTP intake for Baichuan HaCfg wake/sleep push (cmd 806/807). Prefer this over SMTP when the camera firmware supports it — lower latency, no AUTH dance. Enable, then use \"Auto-configure HaCfg webhook\" on each battery camera (or set preference to Auto).",
+  "baichuanWebhookSettings.s_baichuan-webhook.description": "Preferred over email push when the camera firmware supports it.",
   "baichuanWebhookSettings.s_baichuan-webhook.baichuanWebhookEnabled.label": "Enable HaCfg Webhook Server",
   "baichuanWebhookSettings.s_baichuan-webhook.baichuanWebhookRecommendedHost.label": "Camera-facing host",
   "baichuanWebhookSettings.s_baichuan-webhook.baichuanWebhookPort.label": "HTTP Port",
@@ -47,32 +44,29 @@
   "baichuanWebhookSettings.s_baichuan-webhook.baichuanWebhookBindHost.description": "0.0.0.0 accepts on every interface (cameras on LAN).",
   "osdStateBanner.osdSnapshotState.label": "OSD state",
   "fields.osdChannelName.label": "Channel name",
-  "fields.osdChannelName.description": "Text shown in the channel-name overlay.",
   "osdSection.s_osd.title": "OSD overlay",
-  "osdSection.s_osd.description": "On-screen overlays burned into the video by the camera. Read with `GetOsdDatetime` (cmd_id 44) and pushed with `SetOsdDatetime` (cmd_id 45). Positions are the four frame corners; an overlay the camera holds somewhere else keeps that placement unless a corner is chosen.",
+  "osdSection.s_osd.description": "An overlay the camera holds somewhere else keeps that placement unless a corner is chosen.",
   "hub.s_connection.title": "Connection",
-  "hub.s_connection.description": "Baichuan protocol connection settings for the hub. The same socket fronts every adopted channel — child cameras inherit these credentials, no per-channel login needed.",
+  "hub.s_connection.description": "Child cameras inherit these credentials.",
   "hub.s_connection.host.label": "Hub IP",
   "hub.s_connection.port.label": "Port",
   "hub.s_connection.username.label": "Username",
   "hub.s_connection.password.label": "Password",
   "hub.s_identity.title": "Hub identity",
-  "hub.s_identity.description": "Read-only summary from the autodetect probe. Channel count and model are persisted at first contact so the panel renders without re-probing.",
   "hub.s_identity._model.label": "Model",
   "hub.s_identity._channelCount.label": "Total channels",
   "hub.s_debug.title": "Debug",
-  "hub.s_debug.description": "Lib-side Baichuan tracing. Changing these resets the control-channel client (active streams keep running) so new debug options take effect on the next dial.",
+  "hub.s_debug.description": "Debug logging adds log volume; use it temporarily.",
   "hub.s_debug.debugGeneral.label": "General debug logs",
-  "hub.s_debug.debugGeneral.description": "Forwards `DebugOptions.general=true` — verbose lib protocol logs.",
   "hub.s_debug.debugSocketLogs.label": "Socket trace categories",
-  "hub.s_debug.debugSocketLogs.description": "Per-area lib tracing. Pick only what you need; each adds log volume.",
+  "hub.s_debug.debugSocketLogs.description": "Each area adds log volume.",
   "hub.s_debug.debugSocketLogs.o_debugRtsp.label": "RTSP (proxy/server traffic)",
   "hub.s_debug.debugSocketLogs.o_traceNativeStream.label": "Native stream (cmd 3/4 + H.264/H.265 + param sets)",
   "hub.s_debug.debugSocketLogs.o_traceRecordings.label": "Recordings (FileInfoList, findAlarmVideo, download)",
   "hub.s_debug.debugSocketLogs.o_traceTalk.label": "Talkback (cmd 10/11/201/202)",
   "hub.s_debug.debugSocketLogs.o_traceEvents.label": "Events (cmd 33 — AlarmEventList push)",
   "emailPushSection.s_sleep-push.title": "Battery motion (sleep push)",
-  "emailPushSection.s_sleep-push.description": "Battery cameras sleep and can't be polled for motion. Prefer HaCfg webhook when the firmware supports it (cmd 806); otherwise use Email/SMTP. Enable the matching server under Integrations → Reolink, then Auto-configure. Only one path should be armed — the preference below gates which inbound source is accepted.",
+  "emailPushSection.s_sleep-push.description": "Prefer the HaCfg webhook when the firmware supports it; arm only one path.",
   "emailPushSection.s_sleep-push.batterySleepPushMethod.label": "Preferred sleep-push path",
   "emailPushSection.s_sleep-push.batterySleepPushMethod.o_auto.label": "Auto (webhook if supported, else email)",
   "emailPushSection.s_sleep-push.batterySleepPushMethod.o_webhook.label": "HaCfg webhook only",
@@ -80,7 +74,7 @@
   "emailPushSection.s_sleep-push._autoConfigureBaichuanWebhook.label": "HaCfg webhook",
   "emailPushSection.s_sleep-push._autoConfigureEmailPush.label": "Email push",
   "emailTabSections.s_email-smtp.title": "SMTP server",
-  "emailTabSections.s_email-smtp.description": "The camera's own outgoing-mail (SMTP) settings. Edit and save to write them to the camera, or use \"Auto-configure email push\" under Motion to point it at the built-in server. Leave the password blank to keep the current one.",
+  "emailTabSections.s_email-smtp.description": "Leave the password blank to keep the current one.",
   "emailTabSections.s_email-smtp.emailSmtpServer.label": "SMTP server",
   "emailTabSections.s_email-smtp.emailSmtpPort.label": "SMTP port",
   "emailTabSections.s_email-smtp.emailUserName.label": "Username / sender",
@@ -88,24 +82,21 @@
   "emailTabSections.s_email-smtp.emailSsl.label": "SSL/TLS",
   "emailTabSections.s_email-smtp.emailSendNickname.label": "Sender name",
   "emailTabSections.s_email-recipients.title": "Recipients",
-  "emailTabSections.s_email-recipients.description": "Up to three recipient addresses the camera sends motion mail to.",
   "emailTabSections.s_email-recipients.emailRecipient1.label": "Recipient 1",
   "emailTabSections.s_email-recipients.emailRecipient2.label": "Recipient 2",
   "emailTabSections.s_email-recipients.emailRecipient3.label": "Recipient 3",
   "emailTabSections.s_email-schedule.title": "Alarm schedule",
-  "emailTabSections.s_email-schedule.description": "Master enable for the camera's email alarm schedule (EmailTask).",
   "emailTabSections.s_email-schedule.emailScheduleEnabled.label": "Email alarm schedule enabled",
   "schema.s_driver-refresh.title": "Camera data",
-  "schema.s_driver-refresh.description": "Go and ask the camera now. Every other read here is deliberately cheap about a battery camera — it serves what it already knows and refreshes quietly behind you, and never wakes a sleeping camera just because you opened this tab. This button is the exception: it wakes the camera, re-reads everything, and tells you what it got. Use it after changing settings from the Reolink app, or whenever you want to be sure the form is showing the camera and not a memory of it.",
+  "schema.s_driver-refresh.description": "Wakes a sleeping camera and re-reads everything; no other read here wakes it.",
   "schema.s_driver-refresh._refreshSettings.label": "Refresh from camera",
   "schema.s_connection.title": "Connection",
-  "schema.s_connection.description": "Baichuan protocol connection settings.",
   "schema.s_connection.host.label": "Camera IP",
   "schema.s_connection.port.label": "Port",
   "schema.s_connection.username.label": "Username",
   "schema.s_connection.password.label": "Password",
   "schema.s_network-ports.title": "Service ports",
-  "schema.s_network-ports.description": "Per-protocol enable toggle + port number, pushed via Baichuan `SetNetPort` (cmd_id 36). The Baichuan control port is the Connection → Port field. Changing a port number breaks existing URLs for that protocol until consumers are reconfigured.",
+  "schema.s_network-ports.description": "Changing a port breaks existing URLs for that protocol.",
   "schema.s_network-ports.netHttpEnable.label": "HTTP enabled",
   "schema.s_network-ports.netHttpPort.label": "HTTP port",
   "schema.s_network-ports.netHttpsEnable.label": "HTTPS enabled",
@@ -117,76 +108,59 @@
   "schema.s_network-ports.netOnvifEnable.label": "ONVIF enabled",
   "schema.s_network-ports.netOnvifPort.label": "ONVIF port",
   "schema.s_time-ntp.title": "Time / NTP",
-  "schema.s_time-ntp.description": "Network time synchronisation. The camera-side push goes through the native Baichuan NTP commands; until those land in the driver lib the values persist to the driver config and apply on the next lib update.",
   "schema.s_time-ntp.timeZoneId.label": "Timezone",
-  "schema.s_time-ntp.timeZoneId.description": "Camera timezone. Selecting a zone pushes its standard UTC offset (Baichuan `SetSystemGeneral`, cmd 105) and DST rule (`SetDst`, cmd 107) to the camera — DST is handled automatically by the chosen zone, so summer/winter clocks track correctly without a separate toggle.",
   "schema.s_time-ntp.ntpEnabled.label": "NTP sync",
   "schema.s_time-ntp.ntpServer.label": "NTP server",
   "schema.s_time-ntp.ntpPort.label": "NTP port",
   "schema.s_time-ntp.ntpInterval.label": "Sync interval (min)",
   "schema.s_motion.title": "On-camera motion (MdAlarm)",
-  "schema.s_motion.description": "Camera-side motion detection master switch + sensitivity. Pushed via Baichuan `SetMdAlarm` (cmd_id 47). Range 1..50 matches the Reolink mobile app + web UI; the driver inverts to the camera-side raw value (`51 - value`) before push.",
   "schema.s_motion.motionEnabled.label": "Motion detection",
-  "schema.s_motion.motionEnabled.description": "Master switch for the camera's on-board motion detector. Disabling stops the camera from emitting motion events on the alarm channel.",
   "schema.s_motion.motionSensitivity.label": "Sensitivity",
-  "schema.s_motion.motionSensitivity.description": "Higher = triggers on smaller motion. Reolink user-facing range 1..50.",
   "schema.s_ai-sensitivity.title": "AI detection sensitivity",
-  "schema.s_ai-sensitivity.description": "Per-class on-camera AI sensitivity, stay time (dwell) + min/max target-size gates. Pushed via `SetAiAlarm` (cmd_id 343) in one consolidated write. Sensitivity range 0..100; stay time is the seconds the camera keeps the alarm asserted after the object leaves; target-size gates are the fraction of the frame (0..1) an object must occupy to be considered. Each group appears only when the camera advertises the corresponding detector.",
   "schema.s_image.title": "Image",
-  "schema.s_image.description": "Core image settings pushed via Baichuan `SetImage` (cmd_id 25). Each slider rearms the camera on save; defaults seed from a `GetVideoInput` probe at boot (refreshed on every `applySettingsPatch`). Range 0..255 — most Reolink models clamp to 0..100 internally.",
   "schema.s_image.imgBright.label": "Brightness",
   "schema.s_image.imgContrast.label": "Contrast",
   "schema.s_image.imgSaturation.label": "Saturation",
   "schema.s_image.imgHue.label": "Hue",
   "schema.s_image.imgSharpen.label": "Sharpness",
   "schema.s_isp.title": "Advanced (ISP)",
-  "schema.s_isp.description": "Day/Night + exposure + HDR. Pushed via `SetIsp` (cmd_id 25). The day/night threshold uses cmd_id 297 (DayNightThreshold).",
   "schema.s_isp.ispDayNight.label": "Day/Night mode",
-  "schema.s_isp.ispDayNight.description": "Camera-specific values — common: `auto`, `color`, `blackAndWhite`. The driver normalizes case before push.",
   "schema.s_isp.ispExposure.label": "Exposure",
-  "schema.s_isp.ispExposure.description": "Common values: `auto`, `manual`. Lowercased before push.",
   "schema.s_ir-lights.title": "IR + status LED",
-  "schema.s_ir-lights.description": "IR LED control + per-camera IR brightness. Pushed via `SetIrLights` (cmd_id 209). State `Auto` lets the camera switch IR on automatically at low light; `Off` forces colour-only mode.",
   "schema.s_ir-lights.irLightsState.label": "IR LED",
   "schema.s_ir-lights.irLightsState.o_Auto.label": "Auto (camera decides)",
   "schema.s_ir-lights.irLightsState.o_On.label": "Always on",
   "schema.s_ir-lights.irLightsState.o_Off.label": "Always off",
   "schema.s_ir-lights.irLightsBrightness.label": "IR brightness",
-  "schema.s_ir-lights.irLightsBrightness.description": "Only applied when the camera advertises programmable IR brightness. 0..255 raw range; many models clamp to 0..100.",
+  "schema.s_ir-lights.irLightsBrightness.description": "Only applied when the camera supports adjustable IR brightness.",
   "schema.s_ir-lights.statusLedEnabled.label": "Status LED",
-  "schema.s_ir-lights.statusLedEnabled.description": "The visible status/power LED on the camera body. Pushed via `SetIrLights` (cmd_id 209) as `lightState`.",
   "schema.s_ir-lights.doorbellLedEnabled.label": "Doorbell LED",
-  "schema.s_ir-lights.doorbellLedEnabled.description": "The doorbell button ring LED. Pushed via `SetIrLights` (cmd_id 209) as `doorbellLightState`.",
   "schema.s_auto-focus.title": "Auto focus",
-  "schema.s_auto-focus.description": "Toggles the lens auto-focus subsystem. Pushed via `SetAutoFocus` (cmd_id 225). Disabling locks the lens at its current focal position — useful for fixed-distance scenes where AF would hunt.",
+  "schema.s_auto-focus.description": "Disabling locks the lens at its current focus.",
   "schema.s_auto-focus.autoFocusEnabled.label": "Auto focus",
   "schema.s_audio.title": "Audio output",
-  "schema.s_audio.description": "Speaker volumes pushed via `SetAudioCfg` (cmd_id 265). All ranges 0..100. Doorbell models expose the visitor / talkAndReply channels — non-doorbell cameras ignore those without erroring.",
   "schema.s_audio.audioVolume.label": "Speaker volume",
   "schema.s_audio.audioTalkAndReplyVolume.label": "Talk + reply volume",
-  "schema.s_audio.audioTalkAndReplyVolume.description": "Two-way audio + canned reply playback. Doorbell-only on most firmwares.",
+  "schema.s_audio.audioTalkAndReplyVolume.description": "Doorbell models only.",
   "schema.s_audio.audioVisitorVolume.label": "Visitor volume",
-  "schema.s_audio.audioVisitorVolume.description": "Visitor / chime playback channel. Doorbell-only on most firmwares.",
+  "schema.s_audio.audioVisitorVolume.description": "Doorbell models only.",
   "schema.s_audio-noise.title": "Audio noise reduction",
-  "schema.s_audio-noise.description": "On-camera AI denoise applied to the encoded audio track. Pushed via `SetAudioNoise` (cmd_id 440). 0 disables; 1..3 maps to the Reolink mobile app levels (low / mid / high).",
   "schema.s_audio-noise.audioNoiseLevel.label": "Noise reduction level",
   "schema.s_audio-noise.audioNoiseLevel.description": "0 = off · 1 = low · 2 = medium · 3 = high.",
   "schema.s_intercom.title": "Intercom",
-  "schema.s_intercom.description": "Push-to-talk pipeline tuning. Settings take effect on the next talk session — restart any active session for changes to apply.",
+  "schema.s_intercom.description": "Changes apply to the next talk session.",
   "schema.s_intercom.intercomBlocksPerPayload.label": "Blocks per payload",
-  "schema.s_intercom.intercomBlocksPerPayload.description": "Lower = lower latency (more sendAudio calls/sec). Higher = fewer calls, less per-call socket overhead. Range 1..8. Default 1 (lowest latency).",
+  "schema.s_intercom.intercomBlocksPerPayload.description": "Lower is lower latency, higher is fewer calls. Range 1..8.",
   "schema.s_intercom.intercomMaxBacklogMs.label": "Max backlog (ms)",
-  "schema.s_intercom.intercomMaxBacklogMs.description": "Maximum PCM backlog before dropping oldest samples to cap latency. Higher = more stable on slow systems but more latency. Range 20..5000. Default 120.",
+  "schema.s_intercom.intercomMaxBacklogMs.description": "Higher is more stable on slow systems but adds latency. Range 20..5000.",
   "schema.s_intercom.intercomGain.label": "Output gain",
-  "schema.s_intercom.intercomGain.description": "Multiplier applied to PCM samples before IMA-ADPCM encode. 1.0 = neutral, 2.0 ≈ +6dB, 0.5 ≈ -6dB. Hard-clipped at int16 bounds.",
+  "schema.s_intercom.intercomGain.description": "1.0 = neutral, 2.0 ≈ +6 dB, 0.5 ≈ -6 dB.",
   "schema.s_keyframe-gop.title": "Keyframe interval (GOP)",
-  "schema.s_keyframe-gop.description": "Main-stream keyframe interval in seconds. Pushed via `SetEnc` (cmd_id 57) as `<gop><cur>`. Lower = more keyframes (faster seek/recovery, higher bitrate); higher = fewer keyframes (lower bitrate). The camera clamps to its supported range.",
+  "schema.s_keyframe-gop.description": "Lower = more keyframes (faster recovery, higher bitrate).",
   "schema.s_keyframe-gop.gop.label": "Keyframe interval (s)",
   "schema.s_pir-reduce-alarm.title": "PIR detection",
-  "schema.s_pir-reduce-alarm.description": "Passive-infrared false-alarm filter. Pushed via `SetPirInfo` (cmd_id 213) as `reduceAlarm`. Enabling makes the camera require a stronger/longer PIR signal before triggering, cutting false motion alerts from heat/light flicker.",
   "schema.s_pir-reduce-alarm.pirReduceFalseAlarm.label": "Reduce false alarms",
   "schema.s_auto-reboot.title": "Auto reboot",
-  "schema.s_auto-reboot.description": "Scheduled automatic reboot. Pushed via `SetAutoReboot` (cmd_id 100). Useful for long-uptime stability. Choose a day (or every day) + time; the camera reboots once per matching window.",
   "schema.s_auto-reboot.autoRebootEnabled.label": "Auto reboot",
   "schema.s_auto-reboot.autoRebootWeekDay.label": "Day",
   "schema.s_auto-reboot.autoRebootWeekDay.o_everyday.label": "Every day",
@@ -200,32 +174,27 @@
   "schema.s_auto-reboot.autoRebootHour.label": "Hour (0-23)",
   "schema.s_auto-reboot.autoRebootMinute.label": "Minute (0-59)",
   "schema.s_debug.title": "Debug",
-  "schema.s_debug.description": "Lib-side Baichuan tracing. Changing these resets the control-channel client (active streams keep running) so new debug options take effect on the next dial.",
+  "schema.s_debug.description": "Debug logging adds log volume; use it temporarily.",
   "schema.s_debug.debugGeneral.label": "General debug logs",
-  "schema.s_debug.debugGeneral.description": "Forwards `DebugOptions.general=true` — verbose lib protocol logs.",
   "schema.s_debug.debugSocketLogs.label": "Socket trace categories",
-  "schema.s_debug.debugSocketLogs.description": "Per-area lib tracing. Pick only what you need; each adds log volume.",
+  "schema.s_debug.debugSocketLogs.description": "Each area adds log volume.",
   "schema.s_debug.debugSocketLogs.o_debugRtsp.label": "RTSP (proxy/server traffic)",
   "schema.s_debug.debugSocketLogs.o_traceNativeStream.label": "Native stream (cmd 3/4 + H.264/H.265 + param sets)",
   "schema.s_debug.debugSocketLogs.o_traceRecordings.label": "Recordings (FileInfoList, findAlarmVideo, download)",
   "schema.s_debug.debugSocketLogs.o_traceTalk.label": "Talkback (cmd 10/11/201/202)",
   "schema.s_debug.debugSocketLogs.o_traceEvents.label": "Events (cmd 33 — AlarmEventList push)",
   "errorBanner.sessionsError.label": "Refresh error",
-  "sessionsTabSections.s_sessions-status.description": "Diagnostics for the Baichuan control channel. Auto-refreshes when older than 1 minute; click Refresh to force.",
   "sessionsTabSections.s_sessions-status.sessionsLastRefreshed.label": "Last refreshed",
   "sessionsTabSections.s_sessions-status.sessionsOnlineUsers.label": "Online users (firmware)",
-  "sessionsTabSections.s_sessions-status.sessionsOnlineUsers.description": "Active user sessions reported by the device (cmd_id 145). Includes other admins, mobile app, NVR linkups.",
   "sessionsTabSections.s_sessions-status.sessionsOnlineUsers.userName.label": "User",
   "sessionsTabSections.s_sessions-status.sessionsOnlineUsers.ip.label": "IP",
   "sessionsTabSections.s_sessions-status.sessionsOnlineUsers.sessionId.label": "Session",
   "sessionsTabSections.s_sessions-status.sessionsOnlineUsers.level.label": "Level",
   "sessionsTabSections.s_sessions-status.sessionsOnlineUsers.status.label": "State",
   "sessionsTabSections.s_sessions-status.sessionsSocketPool.label": "Our socket pool",
-  "sessionsTabSections.s_sessions-status.sessionsSocketPool.description": "Open Baichuan TCP/UDP sockets this process holds for the device. One row per pool tag.",
   "sessionsTabSections.s_sessions-status.sessionsSocketPool.tag.label": "Tag",
   "sessionsTabSections.s_sessions-status.sessionsSocketPool.state.label": "State",
   "sessionsTabSections.s_sessions-status.sessionsDedicated.label": "Dedicated lib sessions",
-  "sessionsTabSections.s_sessions-status.sessionsDedicated.description": "Internal lib-side dedicated sessions (streaming/talk channels). Older lib versions leave this list empty.",
   "sessionsTabSections.s_sessions-status.sessionsDedicated.key.label": "Session key",
   "sessionsTabSections.s_sessions-status.sessionsCooldown.label": "Reconnect cooldown",
   "sessionsTabSections.s_sessions-status._refreshSessions.label": "Refresh sessions",
@@ -248,26 +217,17 @@
   "snapshot_groups.capOptionsSnapshot.label": "Cap option probes (getOptions)",
   "field.snapshotFreshness.label": "Per-snapshot read times",
   "snapshotFreshnessSection.s_snapshotFreshness.title": "Snapshot freshness",
-  "snapshotFreshnessSection.s_snapshotFreshness.description": "When each cached camera reading was last fetched. Groups without a stamp were persisted before per-snapshot tracking — their age is unknown, not fresh. Use \"Refresh from camera\" (General) to re-read an awake camera.",
+  "snapshotFreshnessSection.s_snapshotFreshness.description": "Groups without a stamp are of unknown age, not fresh.",
   "schema.s_pir.title": "PIR sensor",
-  "schema.s_pir.description": "Hardware passive-infrared trigger configuration. Pushed via cmd_id 153 (SetPirInfo).",
   "schema.s_pir.pirSensitive.label": "Sensitivity",
-  "schema.s_pir.pirSensitive.description": "Higher value → triggers on smaller motion. Most cameras max at 100.",
   "schema.s_pir.pirIntervalS.label": "Cooldown (seconds)",
   "schema.s_pir.pirReduceAlarm.label": "Reduce false alarms",
-  "schema.s_pir.pirReduceAlarm.description": "Trades detection range for fewer false positives. Maps to firmware `reduceAlarm` flag.",
   "schema.s_motion-floodlight.title": "Motion-triggered floodlight",
-  "schema.s_motion-floodlight.description": "Pushed to the camera (`FloodlightTask`) when the \"Trigger on motion\" toggle is armed. Saved values also re-apply on every motion-trigger flip so the firmware always honours your preference.",
   "schema.s_motion-floodlight.motionLightDurationS.label": "Light duration (s)",
-  "schema.s_motion-floodlight.motionLightDurationS.description": "Seconds the floodlight stays lit after a motion event. Reolink range 1..600s.",
   "schema.s_motion-floodlight.motionLightDetectType.label": "Detection classes",
-  "schema.s_motion-floodlight.motionLightDetectType.description": "Object classes that turn the floodlight on. Composed values (e.g. \"people,vehicle\") fire when ANY listed class detects.",
   "schema.s_siren.title": "Siren",
-  "schema.s_siren.description": "Tone duration when triggered. Set to 0 for \"play until turned off\"; positive values pulse for that many seconds.",
+  "schema.s_siren.description": "0 = play until turned off.",
   "schema.s_siren.sirenDurationS.label": "Default duration (seconds)",
-  "schema.s_siren.sirenDurationS.description": "Forwarded to `setSiren(on=true, duration)` (cmd_id 30) when the operator flips the switch.",
   "schema.s_motion-siren.title": "Motion-triggered siren",
-  "schema.s_motion-siren.description": "Detection classes that fire the siren when \"Trigger on motion\" is armed. Forwarded as a `typeScheduleList` to `setSirenOnMotion` (cmd_id 231). Saved values re-apply on every motion-trigger flip.",
-  "schema.s_motion-siren.motionSirenDetectType.label": "Detection classes",
-  "schema.s_motion-siren.motionSirenDetectType.description": "Object/motion classes that arm the siren. `MD` = generic motion detection."
+  "schema.s_motion-siren.motionSirenDetectType.label": "Detection classes"
 }