@camstack/addon-provider-reolink 1.2.174 → 1.2.175

package/dist/addon.js

@@ -14831,7 +14831,7 @@ DeviceType.Camera;
 * This matters here more than anywhere else in the repo, because every provider
 * that knows a device's host knows its PASSWORD too: `{ host, port, username,
 * password }` sit in one object on Hikvision, Amcrest, Reolink and ONVIF alike,
-* and `http://admin:hunter2@192.168.x.x/` is a URL a browser accepts. The
+* and `http://admin:hunter2@192.168.60.139/` is a URL a browser accepts. The
 * camera's own page will ask for its own login. That is correct, and pre-
 * filling it is the operator's business, not ours.
 *
@@ -20660,8 +20660,9 @@ var NcRuleSchema = NcRuleInputSchema.extend({
 	disabledTargetIds: array(string()).default([])
 });
 /**
-* The state-summary SECTIONS (D647 / D698): the D637 kind groups that report a
-* still-true state. `backups-exports` and `alarm` are not sections — a completed
+* The state-summary SECTIONS (D647 / D698 / D708): the D637 kind groups that
+* report a still-true state. `addons` is the crash-looped addons only and
+* `addon-updates` the addons that are behind (D708 split them). `backups-exports` and `alarm` are not sections — a completed
 * job is not an open state, and the alarm stays instant.
 */
 var NcStateSummarySectionIdSchema = _enum([
@@ -20673,6 +20674,7 @@ var NcStateSummarySectionIdSchema = _enum([
 	"detection-blind",
 	"nodes",
 	"addons",
+	"addon-updates",
 	"updates"
 ]);
 /** One section of a previewed state summary. `unavailable` = its state could not be read. */
@@ -21153,7 +21155,19 @@ var NcAlarmModeDelaysListSchema = array(object({
 	* When this mode may be armed. Absent / null = always allowed (same as a
 	* rule with no `schedule`). Evaluated with {@link isScheduleActive}.
 	*/
-	schedule: NcScheduleSchema.optional()
+	schedule: NcScheduleSchema.optional(),
+	/**
+	* D706: while this mode's ENTRY DELAY runs, do the alarm rules' own pushes go out (as an
+	* intrusion naming the locations)? Absent = false — the entry-delay notification is the
+	* only one, and the matches ride the triggered notification's mosaic (D705).
+	*/
+	notifyDuringEntryDelay: boolean().optional(),
+	/**
+	* D706: notify "watched again" when a sensor this arm bypassed closes and opens again.
+	* Absent = false (logged, not sent). Even when true it is not sent when that same sensor
+	* is the one that starts the entry delay — the entry-delay notification already names it.
+	*/
+	notifySensorRewatched: boolean().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one entry per arm mode" });
 var NcAlarmModeDelaysEditListSchema = array(object({
 	mode: AlarmArmModeSchema,
@@ -21162,7 +21176,11 @@ var NcAlarmModeDelaysEditListSchema = array(object({
 	triggeredDurationSec: NcAlarmTriggeredSecSchema.nullable().optional(),
 	postTriggeredAction: NcAlarmPostTriggeredActionSchema.nullable().optional(),
 	/** Set a schedule, or `null` to clear (mode always allowed again). */
-	schedule: NcScheduleSchema.nullable().optional()
+	schedule: NcScheduleSchema.nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifyDuringEntryDelay: boolean().nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifySensorRewatched: boolean().nullable().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one edit per arm mode" });
 /** One switch of the alarm table: put ONE device on, or take it off, ONE mode's list. */
 var NcAlarmNonBlockingEditSchema = object({
@@ -25023,6 +25041,22 @@ var MotionSourceEnum = _enum([
 	"device-activity"
 ]);
 /**
+* What opened an on-motion detection SESSION: the motion source that passed the
+* camera's `motionSources` gate, and what raised it (the camera itself, or a
+* sensor the operator attached — D672). `sensorName` is the attached sensor's
+* device name as the orchestrator's camera-sensors resolution last read it;
+* absent when unknown or when the camera itself triggered.
+*
+* Carried on the session attach ONLY so the runner's `DetectionPhaseTransition`
+* can say what started the session (D672 rule 11, amended 2026-10-06). The
+* runner never decides anything on it.
+*/
+var SessionTriggerSchema = object({
+	source: MotionSourceEnum,
+	triggeredBy: MotionTriggeredBySchema,
+	sensorName: string().optional()
+});
+/**
 * List of motion sources active on a camera. Empty array is valid:
 * "no source" — happens for battery cams without firmware motion when
 * the operator hasn't opted into the SW analyzer (would hold the
@@ -25274,6 +25308,14 @@ var RunnerCameraConfigSchema = object({
 	*/
 	motionSources: MotionSourcesSchema.default(["analyzer"]),
 	/**
+	* What opened this attach, on a SESSION attach only (see
+	* {@link SessionTriggerSchema}). OPTIONAL with no default: absent on a
+	* standing attach, an occupancy burst, a re-dispatch with no motion event
+	* behind it, and every attach from an orchestrator older than the field — the
+	* runner then names no source on the phase event.
+	*/
+	sessionTrigger: SessionTriggerSchema.optional(),
+	/**
 	* WHICH root detector runs for this camera. The detection counterpart of
 	* {@link motionSources}, same shape and same discipline: a per-camera list
 	* of sources the system understands, vendor-agnostic, owned here.
@@ -33184,7 +33226,7 @@ var LocalInterfaceSchema = object({
 	name: string(),
 	family: _enum(["IPv4", "IPv6"]),
 	address: string(),
-	/** CIDR shorthand (e.g. `192.168.x.x/24`). Empty when OS doesn't expose. */
+	/** CIDR shorthand (e.g. `192.168.10.10/24`). Empty when OS doesn't expose. */
 	cidr: string(),
 	/** OS netmask. Stable across calls so the SDK can hash on it. */
 	netmask: string(),
@@ -33238,7 +33280,8 @@ var ConnectionEndpointSchema = object({
 		"lan-ipv4",
 		"lan-ipv6",
 		"public",
-		"loopback"
+		"loopback",
+		"app-link"
 	]),
 	/**
 	* Originating-interface kind — `lan`/`wifi`/`docker`/`vpn`/`other`/
@@ -33307,15 +33350,27 @@ var GetConnectionEndpointsResultSchema = object({
 	localPort: AdvertisedLocalPortSchema
 });
 /**
-* The chosen outbound endpoint for notification artifacts. `baseUrl: null` =
-* AUTO (resolved from the candidate ranking at send time); `resolved` reports
-* what AUTO currently picks, so the UI can show the effective value either way.
+* The address flagged for notification links. `baseUrl: null` = AUTO, which
+* since D709 is the CamStack app link; `resolved` reports the effective value,
+* so the UI can show it either way.
 */
 var NotificationEndpointSchema = object({
 	/** The operator's explicit choice, or null for AUTO. */
 	baseUrl: string().nullable(),
-	/** What the ranking currently resolves to (null when nothing is reachable). */
-	resolved: string().nullable()
+	/**
+	* The effective flagged address: the explicit choice, else (AUTO) the
+	* CamStack app link `https://camstack.zentik.app` (D709). A pre-D709 hub
+	* answered the public tunnel / mesh here, or null.
+	*/
+	resolved: string().nullable(),
+	/**
+	* The hub origin an app link carries as `hub=` (D709): the hub's best
+	* public HTTPS address — the tunnel, then the mesh (Tailscale MagicDNS) —
+	* picked from this cap's own palette by `pickAppLinkHub`. `null` when the
+	* hub advertises neither; the app link is then minted without `hub=`.
+	* Absent on a pre-D709 hub.
+	*/
+	appLinkHub: string().nullable()
 });
 /**
 * The URLs the SDK / viewer should race for API access. `baseUrls` empty =
@@ -33369,7 +33424,11 @@ method(_void(), ListResultSchema), method(_void(), PreferredSchema), method(obje
 	*  Pass `'https'` when the caller is itself loaded over HTTPS
 	*  to avoid mixed-content blocks in the browser. The public
 	*  tunnel always emits `https://` regardless. */
-	scheme: _enum(["http", "https"]).optional()
+	scheme: _enum(["http", "https"]).optional(),
+	/** Append the CamStack app link entry (`kind: 'app-link'`, D709) —
+	*  an address notification links can be flagged with, not a hub
+	*  route. Default `false`: racers and rankers never see it. */
+	includeAppLink: boolean().optional()
 }), GetConnectionEndpointsResultSchema), method(_void(), NotificationEndpointSchema), method(object({ baseUrl: string().nullable() }), NotificationEndpointSchema, { kind: "mutation" }), method(_void(), ViewerEndpointsSchema), method(object({ baseUrls: array(string()).readonly() }), ViewerEndpointsSchema, { kind: "mutation" }), method(_void(), AllowedAddressesSchema), method(AllowedAddressesSchema, object({ success: literal(true) }), { kind: "mutation" }), method(_void(), AllowedAddressesSchema, { kind: "mutation" }), method(_void(), TlsStatusSchema), method(object({ reason: string().optional() }), TlsStatusSchema, {
 	kind: "mutation",
 	auth: "admin"
@@ -33698,7 +33757,7 @@ var MeshPeerSchema = object({
 	tags: array(string()).readonly(),
 	/** True when the peer advertises itself as an exit-node candidate. */
 	exitNodeOption: boolean(),
-	/** Subnet routes the peer advertises (e.g. `["192.168.x.x/24"]`). */
+	/** Subnet routes the peer advertises (e.g. `["192.168.10.0/24"]`). */
 	advertisedRoutes: array(string()).readonly(),
 	/** Owner account login (e.g. `foo@example.com`). Null for tagged peers. */
 	userLogin: string().nullable(),
@@ -54129,12 +54188,14 @@ var NC_SYSTEM_EVENT_KIND_GROUP_SPECS = [
 	{
 		id: "addons",
 		family: "system",
-		label: "Addons",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Addons stopped",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		id: "addon-updates",
+		family: "system",
+		label: "Addon updates",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		id: "updates",
@@ -54294,13 +54355,15 @@ var STATE_SUMMARY_SECTION_VARS = [
 	},
 	{
 		name: "summaryAddons",
-		label: "Summary: addons",
-		example: "@camstack/addon-recorder 1.2.3 → 1.2.4",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Summary: addons stopped",
+		example: "hub — recorder stopped after repeated crashes",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		name: "summaryAddonUpdates",
+		label: "Summary: addon updates",
+		example: "hub:\n• @camstack/addon-recorder 1.2.3 → 1.2.4",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		name: "summaryUpdates",
@@ -54384,6 +54447,7 @@ var STATE_SUMMARY_VARS = [
 	[...RULE_BODY_ONLY],
 	[...RULE_TEXT],
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
+	([...RULE_TEXT], [...COMBINED_ALARM]),
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
 	([...RULE_TEXT], [...BATTERY, ...CONSUMABLE]),
 	([...RULE_TEXT], [...CONSUMABLE]),
@@ -172288,7 +172352,7 @@ var ReolinkCamera = class ReolinkCamera extends BaseDevice {
 							key: "host",
 							label: "Camera IP",
 							required: true,
-							placeholder: "192.168.x.x"
+							placeholder: "192.168.10.100"
 						},
 						{
 							type: "number",
@@ -174494,7 +174558,7 @@ var ReolinkHub = class ReolinkHub extends BaseDevice {
 							key: "host",
 							label: "Hub IP",
 							required: true,
-							placeholder: "192.168.x.x"
+							placeholder: "192.168.10.100"
 						},
 						{
 							type: "number",
@@ -175328,7 +175392,7 @@ function buildDiscoveryParamsFormSchema() {
 	}, {
 		id: "scan",
 		title: "Scan options",
-		description: "Leave the network blank to scan the local subnet. To find cameras on a different subnet, enter its CIDR (e.g. 192.168.x.x/24).",
+		description: "Leave the network blank to scan the local subnet. To find cameras on a different subnet, enter its CIDR (e.g. 192.168.20.0/24).",
 		columns: 1,
 		fields: [
 			{
@@ -175336,7 +175400,7 @@ function buildDiscoveryParamsFormSchema() {
 				key: "networkCidr",
 				label: "Network (CIDR)",
 				required: false,
-				placeholder: "192.168.x.x/24"
+				placeholder: "192.168.20.0/24"
 			},
 			{
 				type: "boolean",
@@ -175420,7 +175484,7 @@ function buildCreationFormSchema() {
 					key: "host",
 					label: "Host (IP / hostname / UID)",
 					required: true,
-					placeholder: "192.168.x.x",
+					placeholder: "192.168.10.100",
 					description: "For UDP-only mode you can leave the host blank and supply the camera UID below — the library will discover it on the network.",
 					inputType: "text"
 				},

package/dist/addon.mjs

@@ -14823,7 +14823,7 @@ DeviceType.Camera;
 * This matters here more than anywhere else in the repo, because every provider
 * that knows a device's host knows its PASSWORD too: `{ host, port, username,
 * password }` sit in one object on Hikvision, Amcrest, Reolink and ONVIF alike,
-* and `http://admin:hunter2@192.168.x.x/` is a URL a browser accepts. The
+* and `http://admin:hunter2@192.168.60.139/` is a URL a browser accepts. The
 * camera's own page will ask for its own login. That is correct, and pre-
 * filling it is the operator's business, not ours.
 *
@@ -20652,8 +20652,9 @@ var NcRuleSchema = NcRuleInputSchema.extend({
 	disabledTargetIds: array(string()).default([])
 });
 /**
-* The state-summary SECTIONS (D647 / D698): the D637 kind groups that report a
-* still-true state. `backups-exports` and `alarm` are not sections — a completed
+* The state-summary SECTIONS (D647 / D698 / D708): the D637 kind groups that
+* report a still-true state. `addons` is the crash-looped addons only and
+* `addon-updates` the addons that are behind (D708 split them). `backups-exports` and `alarm` are not sections — a completed
 * job is not an open state, and the alarm stays instant.
 */
 var NcStateSummarySectionIdSchema = _enum([
@@ -20665,6 +20666,7 @@ var NcStateSummarySectionIdSchema = _enum([
 	"detection-blind",
 	"nodes",
 	"addons",
+	"addon-updates",
 	"updates"
 ]);
 /** One section of a previewed state summary. `unavailable` = its state could not be read. */
@@ -21145,7 +21147,19 @@ var NcAlarmModeDelaysListSchema = array(object({
 	* When this mode may be armed. Absent / null = always allowed (same as a
 	* rule with no `schedule`). Evaluated with {@link isScheduleActive}.
 	*/
-	schedule: NcScheduleSchema.optional()
+	schedule: NcScheduleSchema.optional(),
+	/**
+	* D706: while this mode's ENTRY DELAY runs, do the alarm rules' own pushes go out (as an
+	* intrusion naming the locations)? Absent = false — the entry-delay notification is the
+	* only one, and the matches ride the triggered notification's mosaic (D705).
+	*/
+	notifyDuringEntryDelay: boolean().optional(),
+	/**
+	* D706: notify "watched again" when a sensor this arm bypassed closes and opens again.
+	* Absent = false (logged, not sent). Even when true it is not sent when that same sensor
+	* is the one that starts the entry delay — the entry-delay notification already names it.
+	*/
+	notifySensorRewatched: boolean().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one entry per arm mode" });
 var NcAlarmModeDelaysEditListSchema = array(object({
 	mode: AlarmArmModeSchema,
@@ -21154,7 +21168,11 @@ var NcAlarmModeDelaysEditListSchema = array(object({
 	triggeredDurationSec: NcAlarmTriggeredSecSchema.nullable().optional(),
 	postTriggeredAction: NcAlarmPostTriggeredActionSchema.nullable().optional(),
 	/** Set a schedule, or `null` to clear (mode always allowed again). */
-	schedule: NcScheduleSchema.nullable().optional()
+	schedule: NcScheduleSchema.nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifyDuringEntryDelay: boolean().nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifySensorRewatched: boolean().nullable().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one edit per arm mode" });
 /** One switch of the alarm table: put ONE device on, or take it off, ONE mode's list. */
 var NcAlarmNonBlockingEditSchema = object({
@@ -25015,6 +25033,22 @@ var MotionSourceEnum = _enum([
 	"device-activity"
 ]);
 /**
+* What opened an on-motion detection SESSION: the motion source that passed the
+* camera's `motionSources` gate, and what raised it (the camera itself, or a
+* sensor the operator attached — D672). `sensorName` is the attached sensor's
+* device name as the orchestrator's camera-sensors resolution last read it;
+* absent when unknown or when the camera itself triggered.
+*
+* Carried on the session attach ONLY so the runner's `DetectionPhaseTransition`
+* can say what started the session (D672 rule 11, amended 2026-10-06). The
+* runner never decides anything on it.
+*/
+var SessionTriggerSchema = object({
+	source: MotionSourceEnum,
+	triggeredBy: MotionTriggeredBySchema,
+	sensorName: string().optional()
+});
+/**
 * List of motion sources active on a camera. Empty array is valid:
 * "no source" — happens for battery cams without firmware motion when
 * the operator hasn't opted into the SW analyzer (would hold the
@@ -25266,6 +25300,14 @@ var RunnerCameraConfigSchema = object({
 	*/
 	motionSources: MotionSourcesSchema.default(["analyzer"]),
 	/**
+	* What opened this attach, on a SESSION attach only (see
+	* {@link SessionTriggerSchema}). OPTIONAL with no default: absent on a
+	* standing attach, an occupancy burst, a re-dispatch with no motion event
+	* behind it, and every attach from an orchestrator older than the field — the
+	* runner then names no source on the phase event.
+	*/
+	sessionTrigger: SessionTriggerSchema.optional(),
+	/**
 	* WHICH root detector runs for this camera. The detection counterpart of
 	* {@link motionSources}, same shape and same discipline: a per-camera list
 	* of sources the system understands, vendor-agnostic, owned here.
@@ -33176,7 +33218,7 @@ var LocalInterfaceSchema = object({
 	name: string(),
 	family: _enum(["IPv4", "IPv6"]),
 	address: string(),
-	/** CIDR shorthand (e.g. `192.168.x.x/24`). Empty when OS doesn't expose. */
+	/** CIDR shorthand (e.g. `192.168.10.10/24`). Empty when OS doesn't expose. */
 	cidr: string(),
 	/** OS netmask. Stable across calls so the SDK can hash on it. */
 	netmask: string(),
@@ -33230,7 +33272,8 @@ var ConnectionEndpointSchema = object({
 		"lan-ipv4",
 		"lan-ipv6",
 		"public",
-		"loopback"
+		"loopback",
+		"app-link"
 	]),
 	/**
 	* Originating-interface kind — `lan`/`wifi`/`docker`/`vpn`/`other`/
@@ -33299,15 +33342,27 @@ var GetConnectionEndpointsResultSchema = object({
 	localPort: AdvertisedLocalPortSchema
 });
 /**
-* The chosen outbound endpoint for notification artifacts. `baseUrl: null` =
-* AUTO (resolved from the candidate ranking at send time); `resolved` reports
-* what AUTO currently picks, so the UI can show the effective value either way.
+* The address flagged for notification links. `baseUrl: null` = AUTO, which
+* since D709 is the CamStack app link; `resolved` reports the effective value,
+* so the UI can show it either way.
 */
 var NotificationEndpointSchema = object({
 	/** The operator's explicit choice, or null for AUTO. */
 	baseUrl: string().nullable(),
-	/** What the ranking currently resolves to (null when nothing is reachable). */
-	resolved: string().nullable()
+	/**
+	* The effective flagged address: the explicit choice, else (AUTO) the
+	* CamStack app link `https://camstack.zentik.app` (D709). A pre-D709 hub
+	* answered the public tunnel / mesh here, or null.
+	*/
+	resolved: string().nullable(),
+	/**
+	* The hub origin an app link carries as `hub=` (D709): the hub's best
+	* public HTTPS address — the tunnel, then the mesh (Tailscale MagicDNS) —
+	* picked from this cap's own palette by `pickAppLinkHub`. `null` when the
+	* hub advertises neither; the app link is then minted without `hub=`.
+	* Absent on a pre-D709 hub.
+	*/
+	appLinkHub: string().nullable()
 });
 /**
 * The URLs the SDK / viewer should race for API access. `baseUrls` empty =
@@ -33361,7 +33416,11 @@ method(_void(), ListResultSchema), method(_void(), PreferredSchema), method(obje
 	*  Pass `'https'` when the caller is itself loaded over HTTPS
 	*  to avoid mixed-content blocks in the browser. The public
 	*  tunnel always emits `https://` regardless. */
-	scheme: _enum(["http", "https"]).optional()
+	scheme: _enum(["http", "https"]).optional(),
+	/** Append the CamStack app link entry (`kind: 'app-link'`, D709) —
+	*  an address notification links can be flagged with, not a hub
+	*  route. Default `false`: racers and rankers never see it. */
+	includeAppLink: boolean().optional()
 }), GetConnectionEndpointsResultSchema), method(_void(), NotificationEndpointSchema), method(object({ baseUrl: string().nullable() }), NotificationEndpointSchema, { kind: "mutation" }), method(_void(), ViewerEndpointsSchema), method(object({ baseUrls: array(string()).readonly() }), ViewerEndpointsSchema, { kind: "mutation" }), method(_void(), AllowedAddressesSchema), method(AllowedAddressesSchema, object({ success: literal(true) }), { kind: "mutation" }), method(_void(), AllowedAddressesSchema, { kind: "mutation" }), method(_void(), TlsStatusSchema), method(object({ reason: string().optional() }), TlsStatusSchema, {
 	kind: "mutation",
 	auth: "admin"
@@ -33690,7 +33749,7 @@ var MeshPeerSchema = object({
 	tags: array(string()).readonly(),
 	/** True when the peer advertises itself as an exit-node candidate. */
 	exitNodeOption: boolean(),
-	/** Subnet routes the peer advertises (e.g. `["192.168.x.x/24"]`). */
+	/** Subnet routes the peer advertises (e.g. `["192.168.10.0/24"]`). */
 	advertisedRoutes: array(string()).readonly(),
 	/** Owner account login (e.g. `foo@example.com`). Null for tagged peers. */
 	userLogin: string().nullable(),
@@ -54121,12 +54180,14 @@ var NC_SYSTEM_EVENT_KIND_GROUP_SPECS = [
 	{
 		id: "addons",
 		family: "system",
-		label: "Addons",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Addons stopped",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		id: "addon-updates",
+		family: "system",
+		label: "Addon updates",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		id: "updates",
@@ -54286,13 +54347,15 @@ var STATE_SUMMARY_SECTION_VARS = [
 	},
 	{
 		name: "summaryAddons",
-		label: "Summary: addons",
-		example: "@camstack/addon-recorder 1.2.3 → 1.2.4",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Summary: addons stopped",
+		example: "hub — recorder stopped after repeated crashes",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		name: "summaryAddonUpdates",
+		label: "Summary: addon updates",
+		example: "hub:\n• @camstack/addon-recorder 1.2.3 → 1.2.4",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		name: "summaryUpdates",
@@ -54376,6 +54439,7 @@ var STATE_SUMMARY_VARS = [
 	[...RULE_BODY_ONLY],
 	[...RULE_TEXT],
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
+	([...RULE_TEXT], [...COMBINED_ALARM]),
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
 	([...RULE_TEXT], [...BATTERY, ...CONSUMABLE]),
 	([...RULE_TEXT], [...CONSUMABLE]),
@@ -172280,7 +172344,7 @@ var ReolinkCamera = class ReolinkCamera extends BaseDevice {
 							key: "host",
 							label: "Camera IP",
 							required: true,
-							placeholder: "192.168.x.x"
+							placeholder: "192.168.10.100"
 						},
 						{
 							type: "number",
@@ -174486,7 +174550,7 @@ var ReolinkHub = class ReolinkHub extends BaseDevice {
 							key: "host",
 							label: "Hub IP",
 							required: true,
-							placeholder: "192.168.x.x"
+							placeholder: "192.168.10.100"
 						},
 						{
 							type: "number",
@@ -175320,7 +175384,7 @@ function buildDiscoveryParamsFormSchema() {
 	}, {
 		id: "scan",
 		title: "Scan options",
-		description: "Leave the network blank to scan the local subnet. To find cameras on a different subnet, enter its CIDR (e.g. 192.168.x.x/24).",
+		description: "Leave the network blank to scan the local subnet. To find cameras on a different subnet, enter its CIDR (e.g. 192.168.20.0/24).",
 		columns: 1,
 		fields: [
 			{
@@ -175328,7 +175392,7 @@ function buildDiscoveryParamsFormSchema() {
 				key: "networkCidr",
 				label: "Network (CIDR)",
 				required: false,
-				placeholder: "192.168.x.x/24"
+				placeholder: "192.168.20.0/24"
 			},
 			{
 				type: "boolean",
@@ -175412,7 +175476,7 @@ function buildCreationFormSchema() {
 					key: "host",
 					label: "Host (IP / hostname / UID)",
 					required: true,
-					placeholder: "192.168.x.x",
+					placeholder: "192.168.10.100",
 					description: "For UDP-only mode you can leave the host blank and supply the camera UID below — the library will discover it on the network.",
 					inputType: "text"
 				},

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-provider-reolink",
-  "version": "1.2.174",
+  "version": "1.2.175",
   "description": "Reolink camera device provider addon for CamStack — native Baichuan protocol",
   "keywords": [
     "camstack",