@camstack/addon-provider-homematic 1.2.80 → 1.2.81

package/dist/addon.js

@@ -8,7 +8,7 @@ let http = require("http");
 let crypto$1 = require("crypto");
 let fs_promises = require("fs/promises");
 let path = require("path");
-//#region ../types/dist/event-category-zAv7pMUz.mjs
+//#region ../types/dist/event-category-CnLqLOKs.mjs
 var EventCategory = /* @__PURE__ */ function(EventCategory) {
 	EventCategory["SystemBoot"] = "system.boot";
 	EventCategory["SystemAddonsReady"] = "system.addons-ready";
@@ -203,6 +203,19 @@ var EventCategory = /* @__PURE__ */ function(EventCategory) {
 	EventCategory["ProcessCrashed"] = "process.crashed";
 	EventCategory["ProcessRestartScheduled"] = "process.restart_scheduled";
 	EventCategory["ProcessRestarted"] = "process.restarted";
+	/**
+	* The SET of storage locations changed — one was created, edited, enabled,
+	* disabled or deleted through `storage.upsertLocation` / `deleteLocation`.
+	*
+	* Telemetry, not a transaction (D8/D11): every consumer that re-resolves on
+	* it must also converge on its own periodic path, because a dropped event
+	* must not leave a node writing to yesterday's disk set forever. It exists
+	* because there was NO signal at all — an operator who added a second
+	* recordings disk in the admin UI got nothing, and the recorder kept its
+	* resolved locations until something else happened to re-resolve them
+	* (D387). Payload `StorageLocationsChangedPayload`.
+	*/
+	EventCategory["StorageLocationsChanged"] = "storage.locations-changed";
 	EventCategory["RecordingStarted"] = "recording.started";
 	EventCategory["RecordingStopped"] = "recording.stopped";
 	EventCategory["RecordingError"] = "recording.error";
@@ -8545,6 +8558,21 @@ var StorageCleanupJobSchema = object({
 });
 var StorageCleanupStatusInputSchema = object({ jobId: string().optional() });
 /**
+* The one typed state of a storage location. Authoritative Zod schema — the TS
+* alias below is `z.infer<>` of it, never a second spelling.
+*/
+var StorageLocationModeSchema = _enum([
+	"active",
+	"readonly",
+	"drain",
+	"disabled"
+]);
+_enum([
+	"normal",
+	"never",
+	"drain"
+]);
+/**
 * `StorageLocationType` — an addon-declared id that identifies the *kind* of
 * storage a location serves. Defined here (not in `capabilities/storage.cap.ts`)
 * so the persisted record schema and the consumer-facing cap can both consume it
@@ -8610,6 +8638,21 @@ var StorageLocationSchema = object({
 	* stops existing rather than being re-derived on every read.
 	*/
 	enabled: boolean().optional(),
+	/**
+	* THE state of this location (D385), and the only authority on what may be
+	* written, read or evicted here. Interpreted in exactly one place —
+	* `storage-location-mode.ts` — which also folds the legacy
+	* `enabled` / `config.readOnly` pair into a mode so an old row is never
+	* ambiguous.
+	*
+	* OPTIONAL only for the wire and for rows written before D385: absence is
+	* resolved by `resolveLocationMode`, and the orchestrator stamps every
+	* unstamped row ONCE at hydrate so absence stops existing rather than being
+	* re-derived on every read. `enabled` survives one release as a DERIVED
+	* mirror (`mode === 'active'`); `withLocationMode` is the only writer of
+	* either, so the two cannot disagree.
+	*/
+	mode: StorageLocationModeSchema.optional(),
 	/** COMPUTED at read time by the orchestrator (statfs of the backing volume
 	*  for node-local locations it can reach) — never persisted, absent when the
 	*  volume is remote/unreachable. The single capacity truth every UI reads. */
@@ -8617,11 +8660,46 @@ var StorageLocationSchema = object({
 		totalBytes: number(),
 		availableBytes: number()
 	}).nullable().optional(),
+	/**
+	* How much of that volume CamStack ITSELF holds on this location (D388) —
+	* COMPUTED at read time from the `storage-occupancy` providers' own figures,
+	* never persisted, never a filesystem walk.
+	*
+	* **ABSENT MEANS UNKNOWN, never zero.** No provider has reported for this
+	* location yet — nobody stores here, the owning addon is down, or the first
+	* refresh has not completed. A UI must omit the segment rather than draw it
+	* at zero, which would claim we occupy nothing (D315). It is an OBJECT and
+	* not a bare number precisely so that a `?? 0` on the consuming side has to
+	* be spelled out loud instead of appearing by accident.
+	*
+	* `measuredAtMs` is the OLDEST contributing measurement, so it is honest
+	* about the whole figure rather than about its freshest part.
+	*/
+	owned: object({
+		bytes: number().int().nonnegative(),
+		measuredAtMs: number().int().nonnegative()
+	}).optional(),
 	createdAt: number(),
 	updatedAt: number()
 });
 object({ isDefault: boolean().optional() });
 /**
+* How far a `drain` has got (D386) — the read a UI renders, and nothing more.
+*
+* `estimatedEmptyAtMs` is derived from the growth the ratchet has actually
+* OBSERVED and is `null` when it has observed none. Never a fabricated date: a
+* drain with no observed growth has no honest ETA, and inventing one is how an
+* operator learns not to believe the screen.
+*/
+var StorageDrainProgressSchema = object({
+	locationId: string(),
+	startedAtMs: number(),
+	startBytes: number(),
+	bytesRemaining: number(),
+	drained: boolean(),
+	estimatedEmptyAtMs: number().nullable()
+});
+/**
 * Reference accepted by consumer-facing `api.storage.*` calls.
 * Either:
 *  - a `StorageLocationType` (e.g. `'backups'`) → the sole location of that type
@@ -22016,7 +22094,7 @@ method(object({
 }), _void(), {
 	kind: "mutation",
 	auth: "admin"
-}), method(object({ id: string() }), object({
+}), method(_void(), array(StorageDrainProgressSchema).readonly()), method(object({ id: string() }), object({
 	ok: boolean(),
 	error: string().optional()
 }), { auth: "admin" }), method(_void(), array(ProviderListEntrySchema).readonly()), method(object({
@@ -22086,6 +22164,51 @@ method(StorageMigrationInputSchema, StorageMigrationPlanSchema, { auth: "admin"
 	kind: "mutation",
 	auth: "admin"
 }), method(object({}), array(StorageMigrationJobSchema).readonly(), { auth: "admin" });
+/**
+* `storage-occupancy` — how many bytes an addon actually HOLDS on a storage
+* location (D388).
+*
+* ## Why this is not `storage-evictable`
+*
+* `storage-evictable.getEvictableUsage` looks like the same question and is
+* not, in two ways that both matter and both bite hardest on the locations an
+* operator most wants a figure for:
+*
+*  - it reports the whole eviction DOMAIN, not the location. `recordings:default`
+*    and `recordingsLow:default` deliberately share one root and evict as one
+*    oldest-first pool, so both answer with the SAME combined total. As an
+*    occupancy figure that double-counts the disk.
+*  - it reports ZERO for a location whose eviction policy is `never` (D385) —
+*    a `readonly` or `disabled` disk. Those are exactly the disks an operator
+*    is retiring and staring at.
+*
+* So this is its own contract with its own quantity, and the quantity is
+* OCCUPIED: every byte the addon holds on that location, whether or not it
+* would ever be willing to delete it. A provider that can only answer
+* "evictable" must not register here — a number that silently means different
+* things per class is worse than no number.
+*
+* ## Absence is an answer
+*
+* A location nobody reports for is UNKNOWN, never zero (D315). The orchestrator
+* stamps `StorageLocation.owned` only for locations it has a report for, and
+* the field is an OBJECT rather than a bare number so that a `?? 0` on the
+* consuming side has to be written out loud instead of appearing by accident.
+*
+* `internal: true` — consumed by the orchestrator's `listLocations` stamp, never
+* a public client surface. Clients read the stamped `StorageLocation.owned`.
+*/
+/** One provider's occupancy answer for one location. */
+var StorageOccupancyReportSchema = object({
+	locationId: string(),
+	/** Bytes this provider holds on THAT location — not its eviction domain, and
+	*  not net of what it is willing to delete. */
+	ownedBytes: number().int().nonnegative(),
+	/** When the provider last actually measured this. The orchestrator carries it
+	*  through so a UI can say how old the figure is instead of implying "now". */
+	measuredAtMs: number().int().nonnegative()
+});
+method(object({ locationIds: array(string()).readonly() }), array(StorageOccupancyReportSchema).readonly(), { auth: "admin" });
 var ProviderInfoSchema = discriminatedUnion("shouldSaveDiskSpace", [object({
 	providerId: string().min(1),
 	displayName: string().min(1),
@@ -23921,88 +24044,6 @@ onStatusChanged: { data: object({
 	volatileStateFields: ["lastUpdated"]
 };
 /**
-* Network-link snapshot. Same shape for every provider (a Reolink wifi
-* camera, a Home Assistant device with a signal-strength sensor, a Tapo
-* plug): one slice under `device.runtimeState['network-link']`, one badge,
-* one Home Assistant projection.
-*/
-var NetworkLinkStatusSchema = object({
-	/** The link the device is on. `'unknown'` = not read yet, not "no link". */
-	type: _enum([
-		"wifi",
-		"ethernet",
-		"cellular",
-		"unknown"
-	]),
-	/**
-	* Link quality, 0..100 inclusive, normalised by the provider from whatever
-	* the firmware reports (bars, RSSI, a vendor scale). **`null` means NOT
-	* KNOWN or NOT APPLICABLE** — a wired link has no signal, and a wireless
-	* one whose reading has not landed must not be drawn at 0 %. Consumers
-	* SKIP a null rather than coerce it.
-	*/
-	signalPercent: number().min(0).max(100).nullable(),
-	/** Raw received signal strength in dBm, when the firmware reports one. */
-	rssiDbm: number().optional(),
-	/** Network name of a wireless link, when the firmware reports it. */
-	ssid: string().optional(),
-	/** Ms epoch of the last observation. Lets consumers reason about freshness. */
-	lastUpdated: number()
-});
-var networkLinkCapability = {
-	name: "network-link",
-	scope: "device",
-	deviceNative: true,
-	mode: "singleton",
-	deviceTypes: [
-		DeviceType.Camera,
-		DeviceType.Sensor,
-		DeviceType.Button,
-		DeviceType.Switch,
-		DeviceType.Light,
-		DeviceType.Lock,
-		DeviceType.Siren
-	],
-	methods: {},
-	events: { 
-	/**
-	* Emitted whenever the cached status changes (a link switch, a signal
-	* reading that moved). Mirrored on the parent chain by the
-	* DeviceEventPropagator like `battery.onStatusChanged`.
-	*/
-onStatusChanged: { data: object({
-		deviceId: number(),
-		status: NetworkLinkStatusSchema
-	}) } },
-	status: {
-		schema: NetworkLinkStatusSchema,
-		kind: "push",
-		empty: {
-			type: "unknown",
-			signalPercent: null,
-			lastUpdated: 0
-		}
-	},
-	/**
-	* Runtime-state slice — every provider stores the same shape under
-	* `device.runtimeState['network-link']`, read once by the badge and the
-	* Home Assistant projector regardless of the driver.
-	*/
-	runtimeState: NetworkLinkStatusSchema,
-	/**
-	* Runtime-state durability: **restored** — a link reading is slow to
-	* change and a sleeping battery camera may not report for hours; the
-	* restored slice is what the badge shows until the next read.
-	*
-	* See `RuntimeStateDurability`. Enforced by
-	* `scripts/check-runtime-state-durability.ts`.
-	*/
-	durability: "restored",
-	/** Clock fields: written, but excluded from the compare that decides
-	*  whether persisting is worth a SQLite commit. */
-	volatileStateFields: ["lastUpdated"]
-};
-/**
 * Generic boolean sensor — last-resort fallback when no domain-
 * specific binary cap fits (Home Assistant `binary_sensor` without a
 * known `device_class`, or a domain we haven't typed yet). Pure
@@ -27532,6 +27573,369 @@ var nativeObjectDetectionCapability = {
 	volatileStateFields: ["lastFetchedAt"]
 };
 /**
+* `navigation` — a device-scoped capability that natively expresses the FULL
+* navigation / action surface of a robot that DRIVES ITSELF and carries an
+* on-board camera (the Dreame robot-vacuum camera is the first provider).
+*
+* Why a NEW cap rather than overloading `ptz`:
+*   - `ptz` moves a *gimbal* on a fixed camera (pan/tilt/zoom of the lens). A
+*     robot vacuum has no gimbal — the whole chassis drives, turns and spins.
+*     The two are different physical models: PTZ is absolute-position + presets,
+*     navigation is momentary drive nudges + discrete robot ACTIONS
+*     (dock / spot-clean / follow-pet / go-to-point / …).
+*   - This cap is the SOURCE OF TRUTH. Two consumers adapt from it rather than
+*     the reverse:
+*       1. a native CamStack navigation panel (data-driven from `listActions`
+*          / `getOptions`), and
+*       2. the PTZ surface — a thin adapter mimics `ptz` from `navigation` so a
+*          robot camera shows up in the existing PTZ control path without every
+*          PTZ provider learning about robots. The mapping lives in the adapter,
+*          not here (see the addon design note):
+*            ptz.continuousMove({pan,tilt}) → navigation.move({pan,tilt})
+*            ptz.stop()                      → navigation.stop()
+*            ptz.goHome()                    → navigation.runAction('goHome')
+*            ptz.getPresets()                → navigation.listActions()  (id→preset)
+*            ptz.goToPreset(id)              → navigation.runAction(id)
+*
+* ## Continuous drive
+*
+* `move` is MOMENTARY. Fluid navigation comes from the UI (or the PTZ adapter)
+* sending `move({pan,tilt})` REPEATEDLY at ~1 Hz while a direction is held, and
+* one `stop()` on release — exactly like the robot app's remote-drive joystick.
+* The provider forwards EACH `move` to one drive write; it must NOT debounce or
+* coalesce them. The UI owns the cadence.
+*
+* ## The action dictionary
+*
+* The discrete controls (dock / locate / spot-clean / follow / flash / sounds)
+* are a DATA-DRIVEN dictionary the cap exposes via `listActions()`. Each entry
+* carries `{ id, kind, label, icon }` (plus `soundId` for sound entries) so the
+* native panel AND the PTZ mimic render buttons WITHOUT hardcoding a
+* vendor-specific list. `kind: 'action'` entries are triggered with
+* `runAction({ actionId })`; `kind: 'sound'` entries with `playSound({ soundId })`
+* (the entry carries the `soundId` to pass). The general primitives — `move`,
+* `stop`, `goToPoint` — stay as first-class methods, not dictionary entries.
+*
+* NOTE (provider wiring): the first provider (Dreame) drives this with the RAW
+* `callAction(siid,aiid,in)` / `setProperty({siid,piid,value})` MIoT primitives
+* that the currently-published `@apocaliss92/nodedreame` already exposes on
+* every device handle. A future nodedreame publish adds a typed
+* `DreameCameraController` (drive / playPetSound / spotClean / findPet / …); the
+* provider can then swap the raw calls for the typed methods with no change to
+* THIS contract.
+*/
+/**
+* A momentary drive nudge. The robot MOVES (no gimbal) for as long as the caller
+* keeps sending nudges (~1 Hz); an explicit `stop` (or letting the nudges lapse)
+* halts it.
+*
+*   - `pan`   — turn: negative = left, positive = right, 0 = straight.
+*   - `tilt`  — throttle: positive = forward, negative = spin / turn-around.
+*   - `speed` — optional intensity hint [0, 1]; the provider may scale the drive
+*               vector by it (drivers without proportional drive ignore it).
+*
+* `pan` / `tilt` are normalized [-1, 1]. Both optional so a caller can nudge one
+* axis alone; an all-undefined nudge is a no-op.
+*/
+var NavigationMoveCommandSchema = object({
+	pan: number().min(-1).max(1).optional(),
+	tilt: number().min(-1).max(1).optional(),
+	speed: number().min(0).max(1).optional()
+});
+/**
+* The enumerated discrete actions a navigation-capable robot can perform via
+* `runAction`. This is the CLOSED vocabulary; a given device advertises the
+* subset it supports through `listActions`. Sounds are NOT here — they go through
+* `playSound` (see the `sound` dictionary entries).
+*/
+var NavigationActionIdSchema = _enum([
+	"goHome",
+	"locate",
+	"spotClean",
+	"findPet",
+	"personFollow",
+	"stop",
+	"startClean",
+	"pauseClean",
+	"dockWash",
+	"autoEmpty",
+	"flashOn",
+	"flashOff"
+]);
+/** Whether a dictionary entry is a `runAction` action or a `playSound` sound. */
+var NavigationEntryKindSchema = _enum(["action", "sound"]);
+/**
+* One entry in the navigation action dictionary — the DATA-DRIVEN unit both the
+* native panel and the PTZ mimic render as a button.
+*
+*   - `id`      — stable id. For `kind:'action'` it is a {@link NavigationActionId}
+*                 (pass to `runAction`); for `kind:'sound'` it is a namespaced id
+*                 (`sound:meow`) whose `soundId` is passed to `playSound`.
+*   - `icon`    — icon HINT (lucide-style name; the UI maps it to its own set).
+*   - `label`   — operator-facing English label.
+*   - `soundId` — wire sound id, present only on `kind:'sound'` entries.
+*   - `enabled` — per-device FEATURE FLAG. `listActions` reports it so the UI /
+*                 PTZ render ONLY enabled entries. Data-driven: the provider
+*                 flips it from config, never by editing code.
+*/
+var NavigationActionEntrySchema = object({
+	id: string(),
+	kind: NavigationEntryKindSchema,
+	label: string(),
+	icon: string(),
+	/** Present only on `kind:'sound'` entries — the id to pass to `playSound`. */
+	soundId: number().int().optional(),
+	/** Per-device feature flag — render this entry only when true. */
+	enabled: boolean()
+});
+/** Coordinates for `goToPoint` — a point on the robot's live map. */
+var NavigationPointSchema = object({
+	x: number(),
+	y: number()
+});
+/**
+* Per-device FEATURE-FLAG report for the general (non-dictionary) primitives.
+* The cap reports which are enabled so the UI / PTZ render only the controls
+* that are turned on for THIS device. Data-driven: the provider derives these
+* from config + probe, never hardcoded in the UI. The per-DICTIONARY-entry flags
+* live on {@link NavigationActionEntrySchema.enabled}; these gate the primitives
+* that are not dictionary entries.
+*
+*   - `move` / `stop`   — the momentary drive joystick.
+*   - `goToPoint`       — send-to-map-coordinate. Ships OFF on Dreame until the
+*                         map-coordinate plumbing is wired.
+*   - `runAction`       — the discrete action buttons (dictionary `kind:'action'`).
+*   - `playSound`       — the sound buttons (dictionary `kind:'sound'`).
+*   - `light`           — the on/off fill-light toggle (works anytime).
+*   - `lightMode`       — the auto/manual selector + manual level slider (a
+*                         camera-service control; needs an active stream).
+*/
+var NavigationFeaturesSchema = object({
+	move: boolean(),
+	stop: boolean(),
+	goToPoint: boolean(),
+	runAction: boolean(),
+	playSound: boolean(),
+	light: boolean(),
+	lightMode: boolean()
+});
+/** Light mode: `auto` lets the camera choose brightness; `manual` uses `level`. */
+var NavigationLightModeSchema = _enum(["auto", "manual"]);
+/**
+* Live navigation state so the UI can reflect what the robot is doing:
+*   - `mode`       — coarse activity (idle / cleaning / following / …).
+*   - `following`  — person/pet follow is currently armed.
+*   - `flash`      — the on-camera fill light is on.
+*   - `lightMode`  — auto vs manual fill-light mode.
+*   - `lightLevel` — manual fill-light level (40..100); meaningful when
+*                    `lightMode === 'manual'`.
+*/
+var NavigationStatusSchema = object({
+	mode: _enum([
+		"idle",
+		"cleaning",
+		"spot",
+		"following",
+		"goto",
+		"returning",
+		"paused",
+		"unknown"
+	]),
+	following: boolean(),
+	flash: boolean(),
+	lightMode: NavigationLightModeSchema,
+	lightLevel: number().min(40).max(100),
+	/** Ms epoch when the slice was last updated. */
+	lastChangedAt: number()
+});
+/**
+* Runtime-state slice owned by this cap (kernel-managed: validated, mirrored,
+* observable). Adds `lastFetchedAt` on top of the status shape per the
+* convention.
+*/
+var NavigationRuntimeStateSchema = NavigationStatusSchema.extend({ lastFetchedAt: number() });
+var navigationCapability = {
+	name: "navigation",
+	scope: "device",
+	deviceNative: true,
+	mode: "singleton",
+	deviceTypes: [DeviceType.Camera],
+	deviceConfig: { ui: {
+		kind: "widget",
+		widgetId: "host/navigation-panel",
+		tab: "navigation",
+		topTab: true,
+		label: "Navigation",
+		order: 0
+	} },
+	methods: {
+		/**
+		* Momentary drive nudge (the robot moves). `protected` — mirrors
+		* `ptz.continuousMove` so the Viewer navigation panel (and the PTZ-mimic
+		* path) works for any authenticated user, not admin-only. The UI sends
+		* these at ~1 Hz while a control is held; the provider forwards each one to
+		* a single drive write WITHOUT debouncing.
+		*/
+		move: method(NavigationMoveCommandSchema.extend({ deviceId: number() }), _void(), { kind: "mutation" }),
+		/** Halt all motion immediately (zero drive vector). */
+		stop: method(object({ deviceId: number() }), _void(), { kind: "mutation" }),
+		/** Send the robot to a point on its live map. */
+		goToPoint: method(NavigationPointSchema.extend({ deviceId: number() }), _void(), { kind: "mutation" }),
+		/**
+		* Enumerate the discrete controls THIS device supports (data-driven UI +
+		* PTZ mimic). Camera-probed subset of {@link NAVIGATION_ACTION_CATALOG}.
+		*/
+		listActions: method(object({ deviceId: number() }), array(NavigationActionEntrySchema)),
+		/**
+		* Run one discrete action (a `kind:'action'` dictionary entry). Invalid /
+		* unsupported action ids are rejected by the provider.
+		*/
+		runAction: method(object({
+			deviceId: number(),
+			actionId: NavigationActionIdSchema
+		}), _void(), { kind: "mutation" }),
+		/** Play a sound by its wire id (the `soundId` of a `kind:'sound'` entry). */
+		playSound: method(object({
+			deviceId: number(),
+			soundId: number().int()
+		}), _void(), { kind: "mutation" }),
+		/**
+		* Turn the on-camera fill light on / off (the `OpenFullLight` control —
+		* works anytime, no active stream required).
+		*/
+		setLightOn: method(object({
+			deviceId: number(),
+			on: boolean()
+		}), _void(), { kind: "mutation" }),
+		/**
+		* Set the fill-light mode (auto vs manual). `manual` optionally carries the
+		* initial `level`. The auto/manual + level control is a CAMERA-service
+		* action that generally needs an active camera stream/monitor session — the
+		* UI shows the manual level slider ONLY when `mode === 'manual'`.
+		*/
+		setLightMode: method(object({
+			deviceId: number(),
+			mode: NavigationLightModeSchema,
+			level: number().min(40).max(100).optional()
+		}), _void(), { kind: "mutation" }),
+		/** Set the MANUAL fill-light level (40..100). Implies `manual` mode. */
+		setLightLevel: method(object({
+			deviceId: number(),
+			level: number().min(40).max(100)
+		}), _void(), { kind: "mutation" }),
+		/**
+		* Per-device FEATURE-FLAG report for the general primitives — drives which
+		* controls the UI shows (the per-entry flags for the dictionary come back on
+		* `listActions`).
+		*/
+		getFeatures: method(object({ deviceId: number() }), NavigationFeaturesSchema)
+	},
+	events: { onStatusChanged: { data: object({
+		deviceId: number(),
+		status: NavigationStatusSchema
+	}) } },
+	status: {
+		schema: NavigationStatusSchema,
+		kind: "push"
+	},
+	/**
+	* Runtime-state slice mirrored by the kernel. The navigation panel watches it
+	* for live mode / follow / flash changes.
+	*/
+	runtimeState: NavigationRuntimeStateSchema,
+	/**
+	* Runtime-state durability: **session** — like `vacuum-control`, a restored
+	* `mode: cleaning` / `following: true` is a robot that is not actually doing
+	* that. The live handle re-publishes on connect.
+	*
+	* See `RuntimeStateDurability`. Enforced by
+	* `scripts/check-runtime-state-durability.ts`.
+	*/
+	durability: "session"
+};
+/**
+* Network-link snapshot. Same shape for every provider (a Reolink wifi
+* camera, a Home Assistant device with a signal-strength sensor, a Tapo
+* plug): one slice under `device.runtimeState['network-link']`, one badge,
+* one Home Assistant projection.
+*/
+var NetworkLinkStatusSchema = object({
+	/** The link the device is on. `'unknown'` = not read yet, not "no link". */
+	type: _enum([
+		"wifi",
+		"ethernet",
+		"cellular",
+		"unknown"
+	]),
+	/**
+	* Link quality, 0..100 inclusive, normalised by the provider from whatever
+	* the firmware reports (bars, RSSI, a vendor scale). **`null` means NOT
+	* KNOWN or NOT APPLICABLE** — a wired link has no signal, and a wireless
+	* one whose reading has not landed must not be drawn at 0 %. Consumers
+	* SKIP a null rather than coerce it.
+	*/
+	signalPercent: number().min(0).max(100).nullable(),
+	/** Raw received signal strength in dBm, when the firmware reports one. */
+	rssiDbm: number().optional(),
+	/** Network name of a wireless link, when the firmware reports it. */
+	ssid: string().optional(),
+	/** Ms epoch of the last observation. Lets consumers reason about freshness. */
+	lastUpdated: number()
+});
+var networkLinkCapability = {
+	name: "network-link",
+	scope: "device",
+	deviceNative: true,
+	mode: "singleton",
+	deviceTypes: [
+		DeviceType.Camera,
+		DeviceType.Sensor,
+		DeviceType.Button,
+		DeviceType.Switch,
+		DeviceType.Light,
+		DeviceType.Lock,
+		DeviceType.Siren
+	],
+	methods: {},
+	events: { 
+	/**
+	* Emitted whenever the cached status changes (a link switch, a signal
+	* reading that moved). Mirrored on the parent chain by the
+	* DeviceEventPropagator like `battery.onStatusChanged`.
+	*/
+onStatusChanged: { data: object({
+		deviceId: number(),
+		status: NetworkLinkStatusSchema
+	}) } },
+	status: {
+		schema: NetworkLinkStatusSchema,
+		kind: "push",
+		empty: {
+			type: "unknown",
+			signalPercent: null,
+			lastUpdated: 0
+		}
+	},
+	/**
+	* Runtime-state slice — every provider stores the same shape under
+	* `device.runtimeState['network-link']`, read once by the badge and the
+	* Home Assistant projector regardless of the driver.
+	*/
+	runtimeState: NetworkLinkStatusSchema,
+	/**
+	* Runtime-state durability: **restored** — a link reading is slow to
+	* change and a sleeping battery camera may not report for hours; the
+	* restored slice is what the badge shows until the next read.
+	*
+	* See `RuntimeStateDurability`. Enforced by
+	* `scripts/check-runtime-state-durability.ts`.
+	*/
+	durability: "restored",
+	/** Clock fields: written, but excluded from the compare that decides
+	*  whether persisting is worth a SQLite commit. */
+	volatileStateFields: ["lastUpdated"]
+};
+/**
 * network-quality — system-scoped singleton capability tracking RTT,
 * jitter, and observed/peak bandwidth per device + per client.
 *
@@ -29112,287 +29516,6 @@ var ptzAutotrackCapability = {
 	*/
 	durability: "session"
 };
-/**
-* `navigation` — a device-scoped capability that natively expresses the FULL
-* navigation / action surface of a robot that DRIVES ITSELF and carries an
-* on-board camera (the Dreame robot-vacuum camera is the first provider).
-*
-* Why a NEW cap rather than overloading `ptz`:
-*   - `ptz` moves a *gimbal* on a fixed camera (pan/tilt/zoom of the lens). A
-*     robot vacuum has no gimbal — the whole chassis drives, turns and spins.
-*     The two are different physical models: PTZ is absolute-position + presets,
-*     navigation is momentary drive nudges + discrete robot ACTIONS
-*     (dock / spot-clean / follow-pet / go-to-point / …).
-*   - This cap is the SOURCE OF TRUTH. Two consumers adapt from it rather than
-*     the reverse:
-*       1. a native CamStack navigation panel (data-driven from `listActions`
-*          / `getOptions`), and
-*       2. the PTZ surface — a thin adapter mimics `ptz` from `navigation` so a
-*          robot camera shows up in the existing PTZ control path without every
-*          PTZ provider learning about robots. The mapping lives in the adapter,
-*          not here (see the addon design note):
-*            ptz.continuousMove({pan,tilt}) → navigation.move({pan,tilt})
-*            ptz.stop()                      → navigation.stop()
-*            ptz.goHome()                    → navigation.runAction('goHome')
-*            ptz.getPresets()                → navigation.listActions()  (id→preset)
-*            ptz.goToPreset(id)              → navigation.runAction(id)
-*
-* ## Continuous drive
-*
-* `move` is MOMENTARY. Fluid navigation comes from the UI (or the PTZ adapter)
-* sending `move({pan,tilt})` REPEATEDLY at ~1 Hz while a direction is held, and
-* one `stop()` on release — exactly like the robot app's remote-drive joystick.
-* The provider forwards EACH `move` to one drive write; it must NOT debounce or
-* coalesce them. The UI owns the cadence.
-*
-* ## The action dictionary
-*
-* The discrete controls (dock / locate / spot-clean / follow / flash / sounds)
-* are a DATA-DRIVEN dictionary the cap exposes via `listActions()`. Each entry
-* carries `{ id, kind, label, icon }` (plus `soundId` for sound entries) so the
-* native panel AND the PTZ mimic render buttons WITHOUT hardcoding a
-* vendor-specific list. `kind: 'action'` entries are triggered with
-* `runAction({ actionId })`; `kind: 'sound'` entries with `playSound({ soundId })`
-* (the entry carries the `soundId` to pass). The general primitives — `move`,
-* `stop`, `goToPoint` — stay as first-class methods, not dictionary entries.
-*
-* NOTE (provider wiring): the first provider (Dreame) drives this with the RAW
-* `callAction(siid,aiid,in)` / `setProperty({siid,piid,value})` MIoT primitives
-* that the currently-published `@apocaliss92/nodedreame` already exposes on
-* every device handle. A future nodedreame publish adds a typed
-* `DreameCameraController` (drive / playPetSound / spotClean / findPet / …); the
-* provider can then swap the raw calls for the typed methods with no change to
-* THIS contract.
-*/
-/**
-* A momentary drive nudge. The robot MOVES (no gimbal) for as long as the caller
-* keeps sending nudges (~1 Hz); an explicit `stop` (or letting the nudges lapse)
-* halts it.
-*
-*   - `pan`   — turn: negative = left, positive = right, 0 = straight.
-*   - `tilt`  — throttle: positive = forward, negative = spin / turn-around.
-*   - `speed` — optional intensity hint [0, 1]; the provider may scale the drive
-*               vector by it (drivers without proportional drive ignore it).
-*
-* `pan` / `tilt` are normalized [-1, 1]. Both optional so a caller can nudge one
-* axis alone; an all-undefined nudge is a no-op.
-*/
-var NavigationMoveCommandSchema = object({
-	pan: number().min(-1).max(1).optional(),
-	tilt: number().min(-1).max(1).optional(),
-	speed: number().min(0).max(1).optional()
-});
-/**
-* The enumerated discrete actions a navigation-capable robot can perform via
-* `runAction`. This is the CLOSED vocabulary; a given device advertises the
-* subset it supports through `listActions`. Sounds are NOT here — they go through
-* `playSound` (see the `sound` dictionary entries).
-*/
-var NavigationActionIdSchema = _enum([
-	"goHome",
-	"locate",
-	"spotClean",
-	"findPet",
-	"personFollow",
-	"stop",
-	"startClean",
-	"pauseClean",
-	"dockWash",
-	"autoEmpty",
-	"flashOn",
-	"flashOff"
-]);
-/** Whether a dictionary entry is a `runAction` action or a `playSound` sound. */
-var NavigationEntryKindSchema = _enum(["action", "sound"]);
-/**
-* One entry in the navigation action dictionary — the DATA-DRIVEN unit both the
-* native panel and the PTZ mimic render as a button.
-*
-*   - `id`      — stable id. For `kind:'action'` it is a {@link NavigationActionId}
-*                 (pass to `runAction`); for `kind:'sound'` it is a namespaced id
-*                 (`sound:meow`) whose `soundId` is passed to `playSound`.
-*   - `icon`    — icon HINT (lucide-style name; the UI maps it to its own set).
-*   - `label`   — operator-facing English label.
-*   - `soundId` — wire sound id, present only on `kind:'sound'` entries.
-*   - `enabled` — per-device FEATURE FLAG. `listActions` reports it so the UI /
-*                 PTZ render ONLY enabled entries. Data-driven: the provider
-*                 flips it from config, never by editing code.
-*/
-var NavigationActionEntrySchema = object({
-	id: string(),
-	kind: NavigationEntryKindSchema,
-	label: string(),
-	icon: string(),
-	/** Present only on `kind:'sound'` entries — the id to pass to `playSound`. */
-	soundId: number().int().optional(),
-	/** Per-device feature flag — render this entry only when true. */
-	enabled: boolean()
-});
-/** Coordinates for `goToPoint` — a point on the robot's live map. */
-var NavigationPointSchema = object({
-	x: number(),
-	y: number()
-});
-/**
-* Per-device FEATURE-FLAG report for the general (non-dictionary) primitives.
-* The cap reports which are enabled so the UI / PTZ render only the controls
-* that are turned on for THIS device. Data-driven: the provider derives these
-* from config + probe, never hardcoded in the UI. The per-DICTIONARY-entry flags
-* live on {@link NavigationActionEntrySchema.enabled}; these gate the primitives
-* that are not dictionary entries.
-*
-*   - `move` / `stop`   — the momentary drive joystick.
-*   - `goToPoint`       — send-to-map-coordinate. Ships OFF on Dreame until the
-*                         map-coordinate plumbing is wired.
-*   - `runAction`       — the discrete action buttons (dictionary `kind:'action'`).
-*   - `playSound`       — the sound buttons (dictionary `kind:'sound'`).
-*   - `light`           — the on/off fill-light toggle (works anytime).
-*   - `lightMode`       — the auto/manual selector + manual level slider (a
-*                         camera-service control; needs an active stream).
-*/
-var NavigationFeaturesSchema = object({
-	move: boolean(),
-	stop: boolean(),
-	goToPoint: boolean(),
-	runAction: boolean(),
-	playSound: boolean(),
-	light: boolean(),
-	lightMode: boolean()
-});
-/** Light mode: `auto` lets the camera choose brightness; `manual` uses `level`. */
-var NavigationLightModeSchema = _enum(["auto", "manual"]);
-/**
-* Live navigation state so the UI can reflect what the robot is doing:
-*   - `mode`       — coarse activity (idle / cleaning / following / …).
-*   - `following`  — person/pet follow is currently armed.
-*   - `flash`      — the on-camera fill light is on.
-*   - `lightMode`  — auto vs manual fill-light mode.
-*   - `lightLevel` — manual fill-light level (40..100); meaningful when
-*                    `lightMode === 'manual'`.
-*/
-var NavigationStatusSchema = object({
-	mode: _enum([
-		"idle",
-		"cleaning",
-		"spot",
-		"following",
-		"goto",
-		"returning",
-		"paused",
-		"unknown"
-	]),
-	following: boolean(),
-	flash: boolean(),
-	lightMode: NavigationLightModeSchema,
-	lightLevel: number().min(40).max(100),
-	/** Ms epoch when the slice was last updated. */
-	lastChangedAt: number()
-});
-/**
-* Runtime-state slice owned by this cap (kernel-managed: validated, mirrored,
-* observable). Adds `lastFetchedAt` on top of the status shape per the
-* convention.
-*/
-var NavigationRuntimeStateSchema = NavigationStatusSchema.extend({ lastFetchedAt: number() });
-var navigationCapability = {
-	name: "navigation",
-	scope: "device",
-	deviceNative: true,
-	mode: "singleton",
-	deviceTypes: [DeviceType.Camera],
-	deviceConfig: { ui: {
-		kind: "widget",
-		widgetId: "host/navigation-panel",
-		tab: "navigation",
-		topTab: true,
-		label: "Navigation",
-		order: 0
-	} },
-	methods: {
-		/**
-		* Momentary drive nudge (the robot moves). `protected` — mirrors
-		* `ptz.continuousMove` so the Viewer navigation panel (and the PTZ-mimic
-		* path) works for any authenticated user, not admin-only. The UI sends
-		* these at ~1 Hz while a control is held; the provider forwards each one to
-		* a single drive write WITHOUT debouncing.
-		*/
-		move: method(NavigationMoveCommandSchema.extend({ deviceId: number() }), _void(), { kind: "mutation" }),
-		/** Halt all motion immediately (zero drive vector). */
-		stop: method(object({ deviceId: number() }), _void(), { kind: "mutation" }),
-		/** Send the robot to a point on its live map. */
-		goToPoint: method(NavigationPointSchema.extend({ deviceId: number() }), _void(), { kind: "mutation" }),
-		/**
-		* Enumerate the discrete controls THIS device supports (data-driven UI +
-		* PTZ mimic). Camera-probed subset of {@link NAVIGATION_ACTION_CATALOG}.
-		*/
-		listActions: method(object({ deviceId: number() }), array(NavigationActionEntrySchema)),
-		/**
-		* Run one discrete action (a `kind:'action'` dictionary entry). Invalid /
-		* unsupported action ids are rejected by the provider.
-		*/
-		runAction: method(object({
-			deviceId: number(),
-			actionId: NavigationActionIdSchema
-		}), _void(), { kind: "mutation" }),
-		/** Play a sound by its wire id (the `soundId` of a `kind:'sound'` entry). */
-		playSound: method(object({
-			deviceId: number(),
-			soundId: number().int()
-		}), _void(), { kind: "mutation" }),
-		/**
-		* Turn the on-camera fill light on / off (the `OpenFullLight` control —
-		* works anytime, no active stream required).
-		*/
-		setLightOn: method(object({
-			deviceId: number(),
-			on: boolean()
-		}), _void(), { kind: "mutation" }),
-		/**
-		* Set the fill-light mode (auto vs manual). `manual` optionally carries the
-		* initial `level`. The auto/manual + level control is a CAMERA-service
-		* action that generally needs an active camera stream/monitor session — the
-		* UI shows the manual level slider ONLY when `mode === 'manual'`.
-		*/
-		setLightMode: method(object({
-			deviceId: number(),
-			mode: NavigationLightModeSchema,
-			level: number().min(40).max(100).optional()
-		}), _void(), { kind: "mutation" }),
-		/** Set the MANUAL fill-light level (40..100). Implies `manual` mode. */
-		setLightLevel: method(object({
-			deviceId: number(),
-			level: number().min(40).max(100)
-		}), _void(), { kind: "mutation" }),
-		/**
-		* Per-device FEATURE-FLAG report for the general primitives — drives which
-		* controls the UI shows (the per-entry flags for the dictionary come back on
-		* `listActions`).
-		*/
-		getFeatures: method(object({ deviceId: number() }), NavigationFeaturesSchema)
-	},
-	events: { onStatusChanged: { data: object({
-		deviceId: number(),
-		status: NavigationStatusSchema
-	}) } },
-	status: {
-		schema: NavigationStatusSchema,
-		kind: "push"
-	},
-	/**
-	* Runtime-state slice mirrored by the kernel. The navigation panel watches it
-	* for live mode / follow / flash changes.
-	*/
-	runtimeState: NavigationRuntimeStateSchema,
-	/**
-	* Runtime-state durability: **session** — like `vacuum-control`, a restored
-	* `mode: cleaning` / `following: true` is a robot that is not actually doing
-	* that. The live handle re-publishes on connect.
-	*
-	* See `RuntimeStateDurability`. Enforced by
-	* `scripts/check-runtime-state-durability.ts`.
-	*/
-	durability: "session"
-};
 DeviceType.Camera, DeviceType.Sensor, DeviceType.Switch, method(object({ deviceId: number().int().nonnegative() }), object({ success: literal(true) }), {
 	kind: "mutation",
 	auth: "admin"
@@ -38855,6 +38978,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"storage.listDrainProgress": {
+		capName: "storage",
+		capScope: "system",
+		addonId: null,
+		access: "view"
+	},
 	"storage.listLocationDeclarations": {
 		capName: "storage",
 		capScope: "system",
@@ -38999,6 +39128,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"storageOccupancy.getOccupancy": {
+		capName: "storage-occupancy",
+		capScope: "system",
+		addonId: null,
+		access: "view"
+	},
 	"storageProvider.abortUpload": {
 		capName: "storage-provider",
 		capScope: "system",