@camstack/addon-provider-homematic 1.2.48 → 1.2.49

package/dist/addon.js

@@ -19170,6 +19170,50 @@ var EventStoreFootprintSchema = object({
 	totalBytes: number().int(),
 	devices: array(EventStoreDeviceFootprintSchema).readonly()
 });
+/** Event-media footprint for one {@link MediaFileKind}. */
+var EventMediaKindFootprintSchema = object({
+	kind: MediaFileKindEnum,
+	/** Media rows of this kind. */
+	rows: number().int(),
+	/** Bytes on disk held by those rows. */
+	bytes: number().int()
+});
+/**
+* The media footprint broken down by KIND — the axis a deletion decision
+* actually turns on.
+*
+* A byte total says how much there is; it cannot say what is safe to remove.
+* The deletable set (the periodic `snapshot` filmstrip, the surplus per-edge
+* motion stills) and the keep set (`firstFrame`, rolling `lastFrame`,
+* `thumbnail`/`thumbnailSmall`, `keyFrame`/`keyFrameSmall`, the face/plate
+* buffers, gallery media, the CLIP `crop`) are distinguished by `kind` and by
+* nothing else, so sizing a deletion means summing per kind.
+*
+* ## Why `unaccounted*` exists
+*
+* `kinds` is enumerated from {@link MediaFileKindEnum} — the closed set the
+* writers use — and summed one kind at a time. `totalRows` / `totalBytes` come
+* from a SEPARATE unfiltered aggregate over the same rows, never from adding
+* `kinds` up. A row whose stored `kind` is not in the enum (written by a
+* retired code path, or by a version that knew a kind this one does not) would
+* otherwise vanish from the total silently, and an operator would delete
+* against a denominator smaller than the disk.
+*
+* `unaccountedRows` / `unaccountedBytes` are the difference. They are normally
+* zero; a non-zero value is a real finding and must be shown, not rounded away.
+*/
+var EventMediaKindBreakdownSchema = object({
+	/** Every media row in scope, from one unfiltered aggregate. */
+	totalRows: number().int(),
+	/** Every media byte in scope, from that same aggregate. */
+	totalBytes: number().int(),
+	/** Per-kind footprint, ordered by bytes descending. */
+	kinds: array(EventMediaKindFootprintSchema).readonly(),
+	/** `totalRows` minus the summed `kinds` rows — see the schema note. */
+	unaccountedRows: number().int(),
+	/** `totalBytes` minus the summed `kinds` bytes — see the schema note. */
+	unaccountedBytes: number().int()
+});
 /** Per-kind counts returned by the event-prune / device-delete mutations. */
 var EventPruneCountsSchema = object({
 	motion: number().int(),
@@ -19373,6 +19417,9 @@ DeviceType.Camera, method(object({ deviceId: number() }), array(TrackSchema).rea
 }), TrackFlagsSchema, { kind: "mutation" }), method(object({}), EventStoreFootprintSchema, {
 	kind: "query",
 	auth: "admin"
+}), method(object({ deviceId: number().int().optional() }), EventMediaKindBreakdownSchema, {
+	kind: "query",
+	auth: "admin"
 }), method(object({
 	olderThanMs: number(),
 	reason: OpsLogReasonSchema.optional()
@@ -21324,6 +21371,20 @@ method(object({
 	error: string().optional()
 }), { auth: "admin" }), method(_void(), array(ProviderListEntrySchema).readonly()), method(object({
 	providerId: string(),
+	/**
+	* The location this config is an UNSAVED edit of, when there is one.
+	*
+	* `listLocations` replaces every declared secret with the redaction
+	* sentinel, so the edit modal's form state holds the sentinel for any
+	* credential the operator did not retype — and posting that here
+	* without a way to resolve it makes the provider try to authenticate
+	* as `__camstack_redacted__` and report the operator's own working
+	* password as wrong. Given this id, the orchestrator restores each
+	* sentinel from the stored config (same rule as `upsertLocation`)
+	* before dispatching. Omitted by the "Add location" wizard, where
+	* every value was typed just now and nothing is stored yet.
+	*/
+	locationId: string().optional(),
 	config: record(string(), unknown())
 }), object({
 	ok: boolean(),
@@ -35362,6 +35423,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"pipelineAnalytics.getEventMediaFootprintByKind": {
+		capName: "pipeline-analytics",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"pipelineAnalytics.getEventStoreFootprint": {
 		capName: "pipeline-analytics",
 		capScope: "device",
@@ -39027,6 +39094,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"pipelineAnalytics.getEventMediaFootprintByKind": [{
+		name: "deviceId",
+		form: "single",
+		optional: true
+	}],
 	"pipelineAnalytics.getGroup": [{
 		name: "deviceId",
 		form: "single",

package/dist/addon.mjs

@@ -19171,6 +19171,50 @@ var EventStoreFootprintSchema = object({
 	totalBytes: number().int(),
 	devices: array(EventStoreDeviceFootprintSchema).readonly()
 });
+/** Event-media footprint for one {@link MediaFileKind}. */
+var EventMediaKindFootprintSchema = object({
+	kind: MediaFileKindEnum,
+	/** Media rows of this kind. */
+	rows: number().int(),
+	/** Bytes on disk held by those rows. */
+	bytes: number().int()
+});
+/**
+* The media footprint broken down by KIND — the axis a deletion decision
+* actually turns on.
+*
+* A byte total says how much there is; it cannot say what is safe to remove.
+* The deletable set (the periodic `snapshot` filmstrip, the surplus per-edge
+* motion stills) and the keep set (`firstFrame`, rolling `lastFrame`,
+* `thumbnail`/`thumbnailSmall`, `keyFrame`/`keyFrameSmall`, the face/plate
+* buffers, gallery media, the CLIP `crop`) are distinguished by `kind` and by
+* nothing else, so sizing a deletion means summing per kind.
+*
+* ## Why `unaccounted*` exists
+*
+* `kinds` is enumerated from {@link MediaFileKindEnum} — the closed set the
+* writers use — and summed one kind at a time. `totalRows` / `totalBytes` come
+* from a SEPARATE unfiltered aggregate over the same rows, never from adding
+* `kinds` up. A row whose stored `kind` is not in the enum (written by a
+* retired code path, or by a version that knew a kind this one does not) would
+* otherwise vanish from the total silently, and an operator would delete
+* against a denominator smaller than the disk.
+*
+* `unaccountedRows` / `unaccountedBytes` are the difference. They are normally
+* zero; a non-zero value is a real finding and must be shown, not rounded away.
+*/
+var EventMediaKindBreakdownSchema = object({
+	/** Every media row in scope, from one unfiltered aggregate. */
+	totalRows: number().int(),
+	/** Every media byte in scope, from that same aggregate. */
+	totalBytes: number().int(),
+	/** Per-kind footprint, ordered by bytes descending. */
+	kinds: array(EventMediaKindFootprintSchema).readonly(),
+	/** `totalRows` minus the summed `kinds` rows — see the schema note. */
+	unaccountedRows: number().int(),
+	/** `totalBytes` minus the summed `kinds` bytes — see the schema note. */
+	unaccountedBytes: number().int()
+});
 /** Per-kind counts returned by the event-prune / device-delete mutations. */
 var EventPruneCountsSchema = object({
 	motion: number().int(),
@@ -19374,6 +19418,9 @@ DeviceType.Camera, method(object({ deviceId: number() }), array(TrackSchema).rea
 }), TrackFlagsSchema, { kind: "mutation" }), method(object({}), EventStoreFootprintSchema, {
 	kind: "query",
 	auth: "admin"
+}), method(object({ deviceId: number().int().optional() }), EventMediaKindBreakdownSchema, {
+	kind: "query",
+	auth: "admin"
 }), method(object({
 	olderThanMs: number(),
 	reason: OpsLogReasonSchema.optional()
@@ -21325,6 +21372,20 @@ method(object({
 	error: string().optional()
 }), { auth: "admin" }), method(_void(), array(ProviderListEntrySchema).readonly()), method(object({
 	providerId: string(),
+	/**
+	* The location this config is an UNSAVED edit of, when there is one.
+	*
+	* `listLocations` replaces every declared secret with the redaction
+	* sentinel, so the edit modal's form state holds the sentinel for any
+	* credential the operator did not retype — and posting that here
+	* without a way to resolve it makes the provider try to authenticate
+	* as `__camstack_redacted__` and report the operator's own working
+	* password as wrong. Given this id, the orchestrator restores each
+	* sentinel from the stored config (same rule as `upsertLocation`)
+	* before dispatching. Omitted by the "Add location" wizard, where
+	* every value was typed just now and nothing is stored yet.
+	*/
+	locationId: string().optional(),
 	config: record(string(), unknown())
 }), object({
 	ok: boolean(),
@@ -35363,6 +35424,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"pipelineAnalytics.getEventMediaFootprintByKind": {
+		capName: "pipeline-analytics",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"pipelineAnalytics.getEventStoreFootprint": {
 		capName: "pipeline-analytics",
 		capScope: "device",
@@ -39028,6 +39095,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"pipelineAnalytics.getEventMediaFootprintByKind": [{
+		name: "deviceId",
+		form: "single",
+		optional: true
+	}],
 	"pipelineAnalytics.getGroup": [{
 		name: "deviceId",
 		form: "single",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-provider-homematic",
-  "version": "1.2.48",
+  "version": "1.2.49",
   "description": "Homematic / HomematicIP (CCU3 / RaspberryMatic) device-provider addon for CamStack — wraps the nodehomematic library",
   "keywords": [
     "camstack",