@camstack/addon-provider-homematic 1.2.157 → 1.2.158

package/dist/addon.js

@@ -5576,7 +5576,7 @@ var ZodIssueCode = {
 var ZodFirstPartyTypeKind;
 ZodFirstPartyTypeKind || (ZodFirstPartyTypeKind = {});
 //#endregion
-//#region ../types/dist/sleep-BErAxhul.mjs
+//#region ../types/dist/sleep-CARd6wZF.mjs
 /**
 * The audio chunk plane's byte format, and the ONE expansion from a coded
 * window to float samples (D455).
@@ -8318,6 +8318,99 @@ function defineEntryKind(name, spec) {
 	if (defined === void 0) throw new DeclarationRefusedError(`entry kind "${name}" was not built`);
 	return defined;
 }
+var READING_QUANTITIES = [
+	"temperature",
+	"pressure",
+	"speed",
+	"precipitation",
+	"precipitation-rate",
+	"length",
+	"area",
+	"illuminance",
+	"irradiance",
+	"power",
+	"energy",
+	"voltage",
+	"current",
+	"apparent-power",
+	"humidity",
+	"percentage",
+	"concentration-volume",
+	"concentration-mass",
+	"concentration-ppb",
+	"volume",
+	"duration",
+	"duration-ms",
+	"information",
+	"sound-level",
+	"signal-level",
+	"colour-temperature",
+	"angle",
+	"bitrate",
+	"rate",
+	"mass",
+	"index",
+	"ratio",
+	"count",
+	"none",
+	"device"
+];
+var ReadingQuantitySchema = _enum(READING_QUANTITIES);
+new Set(READING_QUANTITIES);
+/**
+* Stored unit symbol for a quantity. `none` means the number is dimensionless
+* (or an index / ratio / count). `device` means the cap has no single unit.
+*/
+var QUANTITY_BASE = {
+	temperature: "°C",
+	pressure: "hPa",
+	speed: "m/s",
+	precipitation: "mm",
+	"precipitation-rate": "mm/h",
+	length: "m",
+	area: "m²",
+	illuminance: "lx",
+	irradiance: "W/m²",
+	power: "W",
+	energy: "kWh",
+	voltage: "V",
+	current: "A",
+	"apparent-power": "VA",
+	humidity: "%",
+	percentage: "%",
+	"concentration-volume": "ppm",
+	"concentration-mass": "µg/m³",
+	"concentration-ppb": "ppb",
+	volume: "L",
+	duration: "s",
+	"duration-ms": "ms",
+	information: "B",
+	"sound-level": "dBFS",
+	"signal-level": "dBm",
+	"colour-temperature": "mired",
+	angle: "°",
+	bitrate: "kbps",
+	rate: "fps",
+	mass: "kg",
+	index: "none",
+	ratio: "none",
+	count: "none",
+	none: "none",
+	device: "device"
+};
+/** The stored unit, or `undefined` when the quantity has no unit symbol. */
+function baseUnitOf(quantity) {
+	const symbol = QUANTITY_BASE[quantity];
+	if (symbol === "none" || symbol === "device") return void 0;
+	return symbol;
+}
+function readingMeta(quantity, extras) {
+	return {
+		quantity,
+		...extras?.precision !== void 0 ? { precision: extras.precision } : {},
+		...extras?.label !== void 0 ? { label: extras.label } : {}
+	};
+}
 /** Shared Zod schemas used across streaming capabilities. */
 var CamProfileSchema = _enum([
 	"high",
@@ -8345,8 +8438,8 @@ var CamStreamKindSchema = _enum([
 	"derived"
 ]);
 var CamStreamResolutionSchema = object({
-	width: number().int().positive(),
-	height: number().int().positive()
+	width: number().int().positive().meta(readingMeta("none")),
+	height: number().int().positive().meta(readingMeta("none"))
 });
 var CameraStreamSchema = object({
 	/** Stable, provider-assigned id unique within the (deviceId) scope. */
@@ -8993,14 +9086,6 @@ Object.freeze({
 		{
 			"path": "aqi",
 			"valueType": "number"
-		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
 		}
 	],
 	"alarm-panel": [
@@ -9036,20 +9121,10 @@ Object.freeze({
 			"valueType": "boolean"
 		}
 	],
-	"ambient-light-sensor": [
-		{
-			"path": "lux",
-			"valueType": "number"
-		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
-		}
-	],
+	"ambient-light-sensor": [{
+		"path": "lux",
+		"valueType": "number"
+	}],
 	"audio-metrics": [
 		{
 			"path": "ts",
@@ -9129,6 +9204,10 @@ Object.freeze({
 			"path": "lastUpdated",
 			"valueType": "number"
 		},
+		{
+			"path": "volts",
+			"valueType": "number"
+		},
 		{
 			"path": "lastContactAt",
 			"valueType": "number"
@@ -9371,10 +9450,6 @@ Object.freeze({
 				"datetime"
 			]
 		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
 		{
 			"path": "min",
 			"valueType": "number"
@@ -9386,19 +9461,6 @@ Object.freeze({
 		{
 			"path": "step",
 			"valueType": "number"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
-		},
-		{
-			"path": "format",
-			"valueType": "enum",
-			"enumValues": [
-				"date",
-				"time",
-				"datetime"
-			]
 		}
 	],
 	"cover": [
@@ -9639,13 +9701,8 @@ Object.freeze({
 		"path": "value",
 		"valueType": "string"
 	}, {
-		"path": "format",
-		"valueType": "enum",
-		"enumValues": [
-			"date",
-			"time",
-			"datetime"
-		]
+		"path": "timestamp",
+		"valueType": "boolean"
 	}],
 	"event-emitter": [
 		{
@@ -9752,20 +9809,10 @@ Object.freeze({
 			"valueType": "number"
 		}
 	],
-	"humidity-sensor": [
-		{
-			"path": "percent",
-			"valueType": "number"
-		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
-		}
-	],
+	"humidity-sensor": [{
+		"path": "percent",
+		"valueType": "number"
+	}],
 	"image": [{
 		"path": "url",
 		"valueType": "string"
@@ -10104,20 +10151,10 @@ Object.freeze({
 			"valueType": "boolean"
 		}
 	],
-	"numeric-sensor": [
-		{
-			"path": "value",
-			"valueType": "number"
-		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
-		}
-	],
+	"numeric-sensor": [{
+		"path": "value",
+		"valueType": "number"
+	}],
 	"pet-feeder": [
 		{
 			"path": "foodLevel",
@@ -10209,14 +10246,6 @@ Object.freeze({
 		{
 			"path": "powerFactor",
 			"valueType": "number"
-		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
 		}
 	],
 	"presence": [
@@ -10245,20 +10274,10 @@ Object.freeze({
 			"valueType": "number"
 		}
 	],
-	"pressure-sensor": [
-		{
-			"path": "hpa",
-			"valueType": "number"
-		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
-		}
-	],
+	"pressure-sensor": [{
+		"path": "hpa",
+		"valueType": "number"
+	}],
 	"privacy-mask": [{
 		"path": "enabled",
 		"valueType": "boolean"
@@ -10569,20 +10588,10 @@ Object.freeze({
 		"path": "tampered",
 		"valueType": "boolean"
 	}],
-	"temperature-sensor": [
-		{
-			"path": "celsius",
-			"valueType": "number"
-		},
-		{
-			"path": "unit",
-			"valueType": "string"
-		},
-		{
-			"path": "precision",
-			"valueType": "number"
-		}
-	],
+	"temperature-sensor": [{
+		"path": "celsius",
+		"valueType": "number"
+	}],
 	"update": [
 		{
 			"path": "currentVersion",
@@ -10693,10 +10702,6 @@ Object.freeze({
 			"path": "temperature",
 			"valueType": "number"
 		},
-		{
-			"path": "temperatureUnit",
-			"valueType": "string"
-		},
 		{
 			"path": "humidity",
 			"valueType": "number"
@@ -10705,18 +10710,10 @@ Object.freeze({
 			"path": "pressure",
 			"valueType": "number"
 		},
-		{
-			"path": "pressureUnit",
-			"valueType": "string"
-		},
 		{
 			"path": "windSpeed",
 			"valueType": "number"
 		},
-		{
-			"path": "windSpeedUnit",
-			"valueType": "string"
-		},
 		{
 			"path": "windBearing",
 			"valueType": "number"
@@ -18229,7 +18226,8 @@ var CompositionProblemSchema = object({
 		"item-field-reserved",
 		"target-missing",
 		"target-unreadable",
-		"not-replaceable"
+		"not-replaceable",
+		"native-capability-replace"
 	]),
 	path: string(),
 	message: string()
@@ -18287,9 +18285,11 @@ var CompositionFieldPlanSchema = object({
 	reads: array(CompositionFieldReadSchema)
 });
 /**
-* What a feature does to its target (D663): `new` builds a capability on a new
-* device; on an existing device it `add`s a capability the device lacks, or
-* `replace`s named fields of one it has natively.
+* What a feature does to its target (D663, D944): `new` builds a capability on a
+* new device; on an existing device it `add`s a capability the device lacks.
+* Replacing a capability the device already serves is refused
+* (`native-capability-replace`), not planned. `replace` remains on the claim
+* wire for a claim the hub already holds.
 */
 var CompositionFeatureModeSchema = _enum([
 	"new",
@@ -20288,12 +20288,12 @@ function buildDeviceAdminUrl(parts) {
 *      providers detect renames by matching `uniqueId` and patch `id`
 *      in-place so dispatch keeps working.
 *
-* **Rendering metadata is NOT stored here.** Display fields (`unit`,
-* `precision`) live in the cap STATUS SLICE so they flow live with every
-* state push and are the single source of truth. The `device_class` tag is
-* an HA-specific input that is consumed at the discovery boundary
-* (`ha-domain-mapping`) to derive the CamStack `DeviceRole`; it is never
-* stored after that point.
+* **Display unit and precision are NOT stored here.** They are a read-time
+* preference (D944). A polymorphic reading stores its `quantity` here once,
+* at adopt, and a date/time value stores `dateTimeShape` the same way —
+* neither is repeated on each sample. The `device_class` tag is an
+* HA-specific input consumed at the discovery boundary (`ha-domain-mapping`)
+* to derive the CamStack `DeviceRole`; it is never stored after that point.
 *
 * The `raw` escape hatch carries provider-specific attributes that don't
 * fit the structured slots (HA `attributes` whitelist, Reolink `deviceCache`
@@ -20307,6 +20307,14 @@ var SourceInfoSchema = object({
 	/** Immutable upstream identifier when available (HA `unique_id`, … ).
 	*  Used to detect rename when `id` changes. */
 	uniqueId: string().optional(),
+	/** Quantity of a polymorphic reading, written once at adopt (D944). */
+	quantity: ReadingQuantitySchema.optional(),
+	/** Date / time / datetime shape of a string reading, written once at adopt. */
+	dateTimeShape: _enum([
+		"date",
+		"time",
+		"datetime"
+	]).optional(),
 	/** Provider-specific extras that don't fit the structured slots.
 	*  Whitelist what goes here per provider — do NOT dump entire HA
 	*  attribute blobs (would explode the meta JSON column). */
@@ -20352,6 +20360,80 @@ function mergeSourceInfo(prev, patch) {
 	return next;
 }
 /**
+* Coerce common unit-of-measurement string variants to a canonical form
+* so the UI's display templates can rely on stable strings. Pure
+* passthrough for unknown units — kept conservative on purpose, the goal
+* is to normalise the long tail of HA `unit_of_measurement` values that
+* have multiple historical spellings (`'°C'` vs `'C'` vs `'celsius'`).
+*
+* Extend the map as we encounter real-world data. Returning the raw
+* input for unknown values is intentional: providers should never
+* lose information silently here.
+*/
+function normalizeUnit(raw) {
+	if (raw == null) return void 0;
+	const trimmed = raw.trim();
+	if (trimmed === "") return void 0;
+	const lower = trimmed.toLowerCase();
+	if (lower === "°c" || lower === "c" || lower === "celsius") return "°C";
+	if (lower === "°f" || lower === "f" || lower === "fahrenheit") return "°F";
+	if (lower === "k" || lower === "kelvin") return "K";
+	if (lower === "%" || lower === "percent" || lower === "percentage") return "%";
+	if (lower === "lx" || lower === "lux") return "lx";
+	if (lower === "hpa" || lower === "hectopascal") return "hPa";
+	if (lower === "kpa") return "kPa";
+	if (lower === "pa") return "Pa";
+	if (lower === "mbar" || lower === "millibar") return "mbar";
+	if (lower === "w" || lower === "watt") return "W";
+	if (lower === "kw" || lower === "kilowatt") return "kW";
+	if (lower === "wh" || lower === "watt-hour") return "Wh";
+	if (lower === "kwh" || lower === "kilowatt-hour") return "kWh";
+	if (lower === "v" || lower === "volt") return "V";
+	if (lower === "a" || lower === "amp" || lower === "ampere") return "A";
+	if (lower === "ma" || lower === "milliampere") return "mA";
+	if (lower === "va") return "VA";
+	if (lower === "ppm") return "ppm";
+	if (lower === "ppb") return "ppb";
+	if (lower === "µg/m³" || lower === "ug/m3" || lower === "µg/m3") return "µg/m³";
+	if (lower === "km/h" || lower === "kph") return "km/h";
+	if (lower === "mph") return "mph";
+	if (lower === "m/s") return "m/s";
+	if (lower === "m") return "m";
+	if (lower === "m²" || lower === "m2") return "m²";
+	if (lower === "mm") return "mm";
+	if (lower === "cm") return "cm";
+	if (lower === "km") return "km";
+	if (lower === "in" || lower === "inch" || lower === "inches") return "in";
+	if (lower === "ft" || lower === "foot" || lower === "feet") return "ft";
+	if (lower === "kg") return "kg";
+	if (lower === "g") return "g";
+	if (lower === "l" || lower === "liter" || lower === "litre" || lower === "liters" || lower === "litres") return "L";
+	if (lower === "ml") return "mL";
+	if (lower === "gal" || lower === "gallon" || lower === "gallons") return "gal";
+	if (lower === "s" || lower === "sec" || lower === "second" || lower === "seconds") return "s";
+	if (lower === "ms") return "ms";
+	if (lower === "min" || lower === "minute" || lower === "minutes") return "min";
+	if (lower === "h" || lower === "hr" || lower === "hour" || lower === "hours") return "h";
+	if (lower === "d" || lower === "day" || lower === "days") return "d";
+	if (lower === "b" || lower === "byte" || lower === "bytes") return "B";
+	if (lower === "kib") return "KiB";
+	if (lower === "mib") return "MiB";
+	if (lower === "gib") return "GiB";
+	if (lower === "tib") return "TiB";
+	if (lower === "kb") return "kB";
+	if (lower === "mb") return "MB";
+	if (lower === "gb") return "GB";
+	if (lower === "dbm") return "dBm";
+	if (lower === "dbfs") return "dBFS";
+	if (lower === "inhg") return "inHg";
+	if (lower === "mm/h") return "mm/h";
+	if (lower === "w/m²" || lower === "w/m2") return "W/m²";
+	if (lower === "°" || lower === "deg" || lower === "degree" || lower === "degrees") return "°";
+	if (lower === "kbps") return "kbps";
+	if (lower === "fps") return "fps";
+	return trimmed;
+}
+/**
 * Key under which `SourceInfo` lives inside `DeviceMeta.metadata`. The
 * blob is a free-form `Record<string, unknown>` shared with hardware-
 * identity fields (`manufacturer`, `model`, `firmware`, …); SourceInfo
@@ -41428,7 +41510,8 @@ method(object({
 			"enum"
 		]),
 		enumValues: array(string()).optional(),
-		item: boolean().optional()
+		item: boolean().optional(),
+		quantity: ReadingQuantitySchema.optional()
 	})).readonly(),
 	itemArray: object({
 		path: string(),
@@ -45272,8 +45355,8 @@ var MaskPolygonShapeSchema = object({
 /** Boolean cell grid — row-major, length === gridWidth*gridHeight. */
 var MaskGridShapeSchema = object({
 	kind: literal("grid"),
-	gridWidth: number(),
-	gridHeight: number(),
+	gridWidth: number().meta(readingMeta("none")),
+	gridHeight: number().meta(readingMeta("none")),
 	cells: array(boolean())
 });
 discriminatedUnion("kind", [
@@ -56753,27 +56836,17 @@ method(object({ nodeId: string().optional() }).optional(), array(AddonListItemSc
 */
 var AirQualitySensorStatusSchema = object({
 	/** Carbon dioxide concentration in ppm. */
-	co2Ppm: number().min(0).optional(),
+	co2Ppm: number().min(0).optional().meta(readingMeta("concentration-volume")),
 	/** Total volatile organic compounds in ppb. */
-	vocPpb: number().min(0).optional(),
+	vocPpb: number().min(0).optional().meta(readingMeta("concentration-ppb")),
 	/** Particulate matter ≤ 2.5 μm in µg/m³. */
-	pm25: number().min(0).optional(),
+	pm25: number().min(0).optional().meta(readingMeta("concentration-mass")),
 	/** Particulate matter ≤ 10 μm in µg/m³. */
-	pm10: number().min(0).optional(),
+	pm10: number().min(0).optional().meta(readingMeta("concentration-mass")),
 	/** Composite AQI value (typically 0..500). */
-	aqi: number().optional(),
+	aqi: number().optional().meta(readingMeta("index")),
 	/** Ms epoch when the slice was last updated. */
-	lastFetchedAt: number(),
-	/** Live display unit of the single metric this slice carries (e.g. HA
-	*  `attributes.unit_of_measurement` → 'ppm' / 'ppb' / 'µg/m³'). Each
-	*  upstream `sensor.*` entity surfaces ONE device_class, so one unit
-	*  per slice is unambiguous. */
-	unit: string().optional(),
-	/** Suggested decimal places for numeric display.
-	*  Populated live from the upstream source when provided (e.g. HA
-	*  `attributes.suggested_display_precision`). Falls back to
-	*  auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional()
+	lastFetchedAt: number()
 });
 var airQualitySensorCapability = {
 	name: "air-quality-sensor",
@@ -56810,12 +56883,12 @@ var airQualitySensorCapability = {
 		},
 		pm25: {
 			kind: "gauge",
-			unit: "ug/m3",
+			unit: "µg/m³",
 			deadband: 1
 		},
 		pm10: {
 			kind: "gauge",
-			unit: "ug/m3",
+			unit: "µg/m³",
 			deadband: 1
 		},
 		aqi: {
@@ -56833,22 +56906,13 @@ var airQualitySensorCapability = {
 * entries with `device_class: illuminance`.
 */
 var AmbientLightSensorStatusSchema = object({
-	/** Current illuminance in lux (lx). */
-	lux: number().min(0).meta({
-		unit: "lx",
+	/** Current illuminance in lux (lx). `null` when the sample was refused (D393). */
+	lux: number().min(0).nullable().meta(readingMeta("illuminance", {
+		precision: 0,
 		label: "Illuminance"
-	}),
+	})),
 	/** Ms epoch when the slice was last updated. */
-	lastFetchedAt: number(),
-	/** Live display unit from the upstream source (e.g. HA
-	*  `attributes.unit_of_measurement`). The UI prefers this over the
-	*  role's canonical unit. Absent → fall back to the canonical unit. */
-	unit: string().optional(),
-	/** Suggested decimal places for numeric display.
-	*  Populated live from the upstream source when provided (e.g. HA
-	*  `attributes.suggested_display_precision`). Falls back to
-	*  auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional()
+	lastFetchedAt: number()
 });
 var ambientLightSensorCapability = {
 	name: "ambient-light-sensor",
@@ -56880,12 +56944,7 @@ var ambientLightSensorCapability = {
 	} } },
 	/** Clock fields: written, but excluded from the compare that decides
 	*  whether persisting is worth a SQLite commit. */
-	volatileStateFields: ["lastFetchedAt"],
-	customize: {
-		version: 1,
-		advanced: "derive",
-		targets: []
-	}
+	volatileStateFields: ["lastFetchedAt"]
 };
 /**
 * Per-class audio metrics aggregated over a sliding window.
@@ -57112,10 +57171,7 @@ var BatteryStatusSchema = object({
 	* Consumers must SKIP a null rather than coerce it — `battery-band` already
 	* declines to band a non-finite reading, which is the correct shape.
 	*/
-	percentage: number().min(0).max(100).nullable().meta({
-		unit: "%",
-		label: "Charge"
-	}),
+	percentage: number().min(0).max(100).nullable().meta(readingMeta("percentage", { label: "Charge" })),
 	/**
 	* Charging source. `'dc'` covers wall/USB adapters; `'solar'` is
 	* Reolink-specific for the Solar Panel 2 accessory (will become
@@ -57142,7 +57198,14 @@ var BatteryStatusSchema = object({
 	*/
 	sleeping: boolean().meta({ label: "Sleeping" }),
 	/** Ms epoch of the last observation. Lets consumers reason about freshness. */
-	lastUpdated: number(),
+	lastUpdated: number().meta(readingMeta("none")),
+	/**
+	* Battery voltage in volts, for a cell the firmware reports as voltage
+	* rather than a percentage (Ecowitt capacitor packs). Absent on cameras
+	* that only report charge. A second reading on this cap, not a second
+	* `numeric-sensor` on the same device.
+	*/
+	volts: number().nullable().optional().meta(readingMeta("voltage", { label: "Voltage" })),
 	/**
 	* Ms epoch of the last time the device PROVED it was reachable — a
 	* completed firmware round-trip, an observed wake, or an inbound push
@@ -57194,7 +57257,6 @@ var BATTERY_DEVICE_TYPES = [
 /** Generic Customize target for the percentage reading (D936). */
 var batteryCustomize = {
 	version: 1,
-	advanced: "derive",
 	targets: [{
 		id: "percentage",
 		cardinality: "scalar",
@@ -57203,7 +57265,7 @@ var batteryCustomize = {
 			stateField: "percentage"
 		},
 		deviceTypes: BATTERY_DEVICE_TYPES,
-		apply: "add-or-replace",
+		apply: "add",
 		path: "percentage",
 		sources: [{
 			kind: "field",
@@ -57324,10 +57386,16 @@ onStatusChanged: { data: object({
 	/**
 	* History (D850): recorded series. The generic capture replaces the `battery` series of `pipeline-analytics:stats-5m`.
 	*/
-	history: { fields: { percentage: {
-		kind: "gauge",
-		unit: "%"
-	} } },
+	history: { fields: {
+		percentage: {
+			kind: "gauge",
+			unit: "%"
+		},
+		volts: {
+			kind: "gauge",
+			unit: "V"
+		}
+	} },
 	customize: batteryCustomize,
 	/** Clock fields: written, but excluded from the compare that decides
 	*  whether persisting is worth a SQLite commit. */
@@ -57374,12 +57442,7 @@ var binaryCapability = {
 	history: { fields: { on: { kind: "boolean" } } },
 	/** Clock fields: written, but excluded from the compare that decides
 	*  whether persisting is worth a SQLite commit. */
-	volatileStateFields: ["lastChangedAt"],
-	customize: {
-		version: 1,
-		advanced: "derive",
-		targets: []
-	}
+	volatileStateFields: ["lastChangedAt"]
 };
 /**
 * Dimmable-light brightness control. Co-exists with `switch` on the
@@ -57395,7 +57458,7 @@ var binaryCapability = {
 */
 var BrightnessStatusSchema = object({
 	/** Current level as 0..100 inclusive. Firmware-reported. */
-	percentage: number().min(0).max(100),
+	percentage: number().min(0).max(100).meta(readingMeta("percentage")),
 	/** Ms epoch of the last operator-driven change. Useful for UI freshness. */
 	lastChangedAt: number()
 });
@@ -57849,21 +57912,21 @@ var ClimateControlStatusSchema = object({
 	/** Single setpoint in Celsius. Used by single-target modes
 	*  (heat / cool / dry). Null when the device is in a range mode
 	*  (`heat_cool`) or has no setpoint at all (`fan_only`/`off`). */
-	target: number().nullable(),
+	target: number().nullable().meta(readingMeta("temperature")),
 	/** Upper bound of the dual setpoint in Celsius. Populated only
 	*  in `heat_cool` mode. */
-	targetHigh: number().nullable(),
+	targetHigh: number().nullable().meta(readingMeta("temperature")),
 	/** Lower bound of the dual setpoint in Celsius. Populated only
 	*  in `heat_cool` mode. */
-	targetLow: number().nullable(),
+	targetLow: number().nullable().meta(readingMeta("temperature")),
 	/** Target relative humidity (0..100). Null when the device has no
 	*  humidity control. */
-	targetHumidity: number().min(0).max(100).nullable(),
+	targetHumidity: number().min(0).max(100).nullable().meta(readingMeta("humidity")),
 	/** Current measured temperature in Celsius. Read-only — pushed by
 	*  the device's internal sensor. */
-	currentTemp: number().nullable(),
+	currentTemp: number().nullable().meta(readingMeta("temperature")),
 	/** Current measured relative humidity (0..100). Read-only. */
-	currentHumidity: number().min(0).max(100).nullable(),
+	currentHumidity: number().min(0).max(100).nullable().meta(readingMeta("humidity")),
 	/** Vertical louver swing on/off. Null when the device has no vertical
 	*  swing surface (gate with `DeviceFeature.ClimateSwingVertical`). */
 	swingVertical: boolean().nullable(),
@@ -57871,11 +57934,11 @@ var ClimateControlStatusSchema = object({
 	*  horizontal swing surface (gate with `DeviceFeature.ClimateSwingHorizontal`). */
 	swingHorizontal: boolean().nullable(),
 	/** Lowest setpoint the device accepts, Celsius. Absent / null = not reported. */
-	minTemp: number().nullable().optional(),
+	minTemp: number().nullable().optional().meta(readingMeta("temperature")),
 	/** Highest setpoint the device accepts, Celsius. Absent / null = not reported. */
-	maxTemp: number().nullable().optional(),
+	maxTemp: number().nullable().optional().meta(readingMeta("temperature")),
 	/** Setpoint granularity, Celsius (0.5, 1). Absent / null = not reported. */
-	tempStep: number().positive().nullable().optional(),
+	tempStep: number().positive().nullable().optional().meta(readingMeta("temperature")),
 	/** Ms epoch when the slice was last updated (push or command). */
 	lastFetchedAt: number()
 });
@@ -58017,17 +58080,17 @@ var climateControlCapability = {
 * modes to expose in the picker without a slice fetch.
 */
 var RgbTripletSchema = object({
-	r: number().int().min(0).max(255),
-	g: number().int().min(0).max(255),
-	b: number().int().min(0).max(255)
+	r: number().int().min(0).max(255).meta(readingMeta("none")),
+	g: number().int().min(0).max(255).meta(readingMeta("none")),
+	b: number().int().min(0).max(255).meta(readingMeta("none"))
 });
 var HsvTripletSchema = object({
 	/** Hue in degrees, 0..360. */
-	h: number().min(0).max(360),
+	h: number().min(0).max(360).meta(readingMeta("none")),
 	/** Saturation as 0..100 inclusive. */
-	s: number().min(0).max(100),
+	s: number().min(0).max(100).meta(readingMeta("none")),
 	/** Value/brightness as 0..100 inclusive. */
-	v: number().min(0).max(100)
+	v: number().min(0).max(100).meta(readingMeta("none"))
 });
 var ColorInputSchema = discriminatedUnion("mode", [
 	object({
@@ -58056,7 +58119,7 @@ var ColorStatusSchema = object({
 	/** Populated when `mode === 'hsv'`. */
 	hsv: HsvTripletSchema.optional(),
 	/** Populated when `mode === 'mired'`. */
-	mireds: number().int().optional(),
+	mireds: number().int().optional().meta(readingMeta("colour-temperature")),
 	/** Ms epoch of the last operator-driven change. */
 	lastChangedAt: number()
 });
@@ -58251,18 +58314,12 @@ _enum([
 	"empty",
 	"full"
 ]);
-/** Units a remaining-life counter is reported in. Closed: the panel renders
-*  each. */
-var ConsumableRemainingUnitSchema = _enum([
-	"days",
-	"hours",
-	"cycles"
-]);
-/** Remaining life as a COUNT, not a percentage (the PetKit desiccant reports
-*  days). `value` null = unknown (D393). */
+/** Whether `remaining.value` is a duration in seconds or a dimensionless count. */
+var ConsumableRemainingKindSchema = _enum(["duration", "count"]);
+/** Remaining life. `value` null = unknown (D393). Duration is seconds. */
 var ConsumableRemainingSchema = object({
-	value: number().min(0).nullable(),
-	unit: ConsumableRemainingUnitSchema
+	value: number().min(0).nullable().meta(readingMeta("device")),
+	kind: ConsumableRemainingKindSchema
 });
 /** A single consumable item. Either a continuous `level` (remaining
 *  life %, or fill % for a `supply` / `waste` item) or a discrete `status`
@@ -58275,7 +58332,7 @@ var ConsumableItemSchema = object({
 	/** Display name. */
 	label: string().min(1),
 	/** Remaining life % (`wear`) or fill % (`supply`, `waste`) when known (0..100). */
-	level: number().min(0).max(100).nullable(),
+	level: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** The provider's discrete verdict when known (binary mode). */
 	status: ConsumableStatusSchema.nullable(),
 	/** What the item is — decides whether low or full is bad. Absent = `wear`. */
@@ -58357,8 +58414,8 @@ var consumablesCustomize = {
 					transforms: [{ kind: "identity" }]
 				}],
 				literals: [{
-					path: "remaining.unit",
-					values: [...ConsumableRemainingUnitSchema.options]
+					path: "remaining.kind",
+					values: [...ConsumableRemainingKindSchema.options]
 				}]
 			},
 			{
@@ -58487,7 +58544,6 @@ reset: method(object({
 				},
 				"remaining.value": {
 					kind: "gauge",
-					unitFrom: "remaining.unit",
 					deadband: 1,
 					displayName: "Remaining"
 				}
@@ -58557,10 +58613,9 @@ var contactCapability = {
 * (empty array for the other kinds). It lives in the slice because
 * HA `select.*` entities may update their options at runtime.
 *
-* The `unit`/`min`/`max`/`step` fields are meaningful for
-* `kind === 'numeric'` and are absent (undefined) for all other
-* kinds. They are populated live from HA attributes on each state
-* push — consistent with `options` and the sensor-unit approach.
+* Numeric `min` / `max` / `step` live in the slice and share the device
+* quantity (`SourceInfo.quantity`, D944). Display precision is a read-time
+* preference. A datetime control's shape is `SourceInfo.dateTimeShape`.
 */
 var ControlStatusSchema = object({
 	kind: _enum([
@@ -58572,39 +58627,17 @@ var ControlStatusSchema = object({
 	/** Current value. Numeric kind → number; select/text/datetime → string.
 	*  Datetime values are ISO 8601 strings (full timestamp, date-only,
 	*  or time-only — HA accepts all three forms). */
-	value: union([number(), string()]),
+	value: union([number().meta(readingMeta("device")), string()]),
 	/** Acceptable values when `kind === 'select'`. Empty for other kinds. */
 	options: array(string()),
 	/** Ms epoch when the slice was last updated. */
 	lastChangedAt: number(),
-	/** Display unit-of-measurement (e.g. '°C', '%', 'lx').
-	*  Populated live from HA `attributes.unit_of_measurement` on each push.
-	*  Meaningful for `kind === 'numeric'`; absent for other kinds. */
-	unit: string().optional(),
-	/** Minimum allowed value. Populated live from HA `attributes.min`.
-	*  Meaningful for `kind === 'numeric'`; absent for other kinds. */
-	min: number().optional(),
-	/** Maximum allowed value. Populated live from HA `attributes.max`.
-	*  Meaningful for `kind === 'numeric'`; absent for other kinds. */
-	max: number().optional(),
-	/** Step increment. Populated live from HA `attributes.step`.
-	*  Meaningful for `kind === 'numeric'`; absent for other kinds. */
-	step: number().optional(),
-	/** Suggested decimal places for numeric display. Populated live from HA
-	*  `attributes.suggested_display_precision`, or derived from `step` when the
-	*  HA attribute is absent. Meaningful for `kind === 'numeric'`; absent for
-	*  other kinds. Falls back to auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional(),
-	/** Date-picker granularity for `kind === 'datetime'`. 'date' → date-only,
-	*  'time' → time-only, 'datetime' → full timestamp. Absent for other kinds
-	*  (UI defaults to 'datetime'). Derived live from the device's HA domain
-	*  (date.* / time.* / datetime.*) or, for input_datetime, from the entity's
-	*  `has_date`/`has_time` attributes on each push. */
-	format: _enum([
-		"date",
-		"time",
-		"datetime"
-	]).optional()
+	/** Minimum allowed value, in the device quantity's base unit. */
+	min: number().optional().meta(readingMeta("device")),
+	/** Maximum allowed value, in the device quantity's base unit. */
+	max: number().optional().meta(readingMeta("device")),
+	/** Step increment, in the device quantity's base unit. */
+	step: number().optional().meta(readingMeta("device"))
 });
 var ControlSetValueInputSchema = discriminatedUnion("kind", [
 	object({
@@ -58670,9 +58703,9 @@ var CoverStatusSchema = object({
 	]),
 	/** 0 = fully closed, 100 = fully open. Null when the device has
 	*  no intermediate position surface. */
-	position: number().min(0).max(100).nullable(),
+	position: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** 0 = closed slats, 100 = open slats. Null when no tilt support. */
-	tiltPosition: number().min(0).max(100).nullable(),
+	tiltPosition: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Ms epoch when the slice was last updated. */
 	lastChangedAt: number()
 });
@@ -58775,9 +58808,9 @@ var NormalizedRangeSchema$1 = object({
 var DayNightStatusSchema = object({
 	mode: DayNightModeSchema,
 	/** IR-cut trigger sensitivity, NORMALIZED 0–100 (higher = switches to night sooner). */
-	sensitivity: number().optional(),
+	sensitivity: number().optional().meta(readingMeta("none")),
 	/** Delay before the IR-cut filter flips, in seconds. */
-	switchDelaySec: number().optional(),
+	switchDelaySec: number().optional().meta(readingMeta("duration")),
 	lastFetchedAt: number()
 });
 /**
@@ -58995,11 +59028,11 @@ var DishwasherStatusSchema = object({
 	/** Feature keys of the programs the appliance currently offers — drives the UI selector. */
 	availablePrograms: array(string()),
 	/** Seconds remaining on the active cycle, or null when not running / not known. */
-	remainingSeconds: number().int().nonnegative().nullable(),
+	remainingSeconds: number().int().nonnegative().nullable().meta(readingMeta("duration")),
 	/** Seconds the delayed start is set to (time until the cycle starts), or null. */
-	delayedStartSeconds: number().int().nonnegative().nullable(),
+	delayedStartSeconds: number().int().nonnegative().nullable().meta(readingMeta("duration")),
 	/** Cycle completion 0..100, or null when not applicable. */
-	progressPercent: number().min(0).max(100).nullable(),
+	progressPercent: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** True when the door is reported open; null when the door state is not known. */
 	doorOpen: boolean().nullable(),
 	/** True when the door is latched (locked) during a cycle; null when not reported. */
@@ -59023,7 +59056,7 @@ var DishwasherStatusSchema = object({
 	/** True while the machine-care (descaling / cleaning-program) reminder is raised; false when clear; null when not reported. */
 	machineCareDue: boolean().nullable(),
 	/** Program runs left before the machine-care reminder is due; null when the appliance does not say. */
-	machineCareRemainingRuns: number().int().nonnegative().nullable(),
+	machineCareRemainingRuns: number().int().nonnegative().nullable().meta(readingMeta("count")),
 	/** Option states: null when the appliance does not expose the option or has not said. */
 	halfLoad: boolean().nullable(),
 	hygienePlus: boolean().nullable(),
@@ -59038,7 +59071,7 @@ var DishwasherStatusSchema = object({
 	/** Feature keys of the events currently raised (salt low, rinse aid low, program finished, …). */
 	activeEvents: array(string()),
 	/** Numeric error code when the appliance reports one; null otherwise. */
-	errorCode: number().nullable(),
+	errorCode: number().nullable().meta(readingMeta("none")),
 	/** Name of the raised alert-level event while the appliance is in error; null otherwise. */
 	errorLabel: string().nullable(),
 	/** Ms epoch of the last value received from the appliance; 0 = never. */
@@ -59269,7 +59302,7 @@ var DoorbellStatusSchema = object({
 	/** Ms epoch of the last press. null = never observed since this provider started. */
 	lastPressedAt: number().nullable(),
 	/** Counter since provider start. Resets on reboot. Useful for metrics/debug. */
-	pressCountSinceStart: number()
+	pressCountSinceStart: number().meta(readingMeta("count"))
 });
 var DoorbellPressEventSchema = object({
 	deviceId: number(),
@@ -59334,17 +59367,7 @@ onPressed: {
 	history: "none",
 	customize: doorbellCustomize
 };
-/**
-* Enum-state sensor — a string value picked from a finite option set.
-* Drives HA `sensor` entries with `state_class: enum` (HVAC action
-* states, weather conditions, contact-source channels, mode strings).
-* The option set is stable across observations; it is persisted in the
-* device config blob (via the control slice at adoption) and is NOT
-* stored in `sourceInfo`.
-*/
-/** Locale-render shape for an ISO `value` carried by a `DateTimeSensor`-role
-*  enum sensor: `date` (date-only), `time` (time-only), `datetime` (both). */
-var EnumSensorDateTimeFormatSchema = _enum([
+_enum([
 	"date",
 	"time",
 	"datetime"
@@ -59352,12 +59375,11 @@ var EnumSensorDateTimeFormatSchema = _enum([
 var EnumSensorStatusSchema = object({
 	value: string(),
 	/**
-	* Set for `DateTimeSensor`-role sensors so the UI renders the ISO `value`
-	* as a locale date/time/datetime; absent for plain enum sensors. HA
-	* `device_class=timestamp` → `'datetime'`, `device_class=date` → `'date'`,
-	* a time-only sensor → `'time'`.
+	* Set when `value` is a timestamp rather than an enum state, so history
+	* does not learn ISO strings as states. The display shape (date / time /
+	* datetime) lives on `SourceInfo.dateTimeShape`, written once at adopt.
 	*/
-	format: EnumSensorDateTimeFormatSchema.optional(),
+	timestamp: boolean().optional(),
 	/** Ms epoch when the slice was last updated. */
 	lastFetchedAt: number()
 });
@@ -59384,11 +59406,11 @@ var enumSensorCapability = {
 	* History (D850): the value as an `enum` series (an appliance's program or
 	* operation state, an HVAC action). The option set is per device, so the
 	* value list is LEARNED as values are first seen (bounded). A sensor with a
-	* `format` carries a timestamp, not a state, and is not recorded.
+	* `timestamp` carries a clock, not a state, and is not recorded.
 	*/
 	history: { fields: { value: {
 		kind: "enum",
-		skipWhenSet: "format"
+		skipWhenSet: "timestamp"
 	} } },
 	/** Clock fields: written, but excluded from the compare that decides
 	*  whether persisting is worth a SQLite commit. */
@@ -59408,13 +59430,13 @@ var EventFireSchema = object({
 	deviceId: number(),
 	eventType: string(),
 	data: record(string(), unknown()).nullable(),
-	timestamp: number(),
-	seq: number()
+	timestamp: number().meta(readingMeta("none")),
+	seq: number().meta(readingMeta("count"))
 });
 var EventEmitterStatusSchema = object({
 	eventTypes: array(string()),
 	lastEvent: EventFireSchema.nullable(),
-	eventCountSinceStart: number()
+	eventCountSinceStart: number().meta(readingMeta("count"))
 });
 var eventEmitterCapability = {
 	name: "event-emitter",
@@ -59827,10 +59849,10 @@ var FanDirectionSchema = _enum(["forward", "reverse"]);
 var FanControlStatusSchema = object({
 	/** Active speed as 0..100 inclusive. Null when the device has no
 	*  speed surface (single-speed fan). */
-	percentage: number().min(0).max(100).nullable(),
+	percentage: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Speed granularity the device accepts (HA `percentage_step`, e.g. 25 for
 	*  a 4-speed fan). Absent when unknown — the UI then falls back to step 1. */
-	percentageStep: number().positive().optional(),
+	percentageStep: number().positive().optional().meta(readingMeta("percentage")),
 	/** Active preset mode (`auto` / `quiet` / `turbo` / vendor-specific)
 	*  — empty string when no preset is active or supported. */
 	preset: string(),
@@ -59951,7 +59973,7 @@ var FeatureProbeStatusSchema = object({
 	/** Camera/firmware model string. `null` when the firmware doesn't expose it. */
 	model: string().nullable(),
 	/** Channel count for NVR/Hub devices; `1` for standalone cameras; `null` pre-probe. */
-	channelCount: number().nullable(),
+	channelCount: number().nullable().meta(readingMeta("count")),
 	/**
 	* Ms epoch of the last SUCCESSFUL probe. `0` before the first probe
 	* completes — drivers' `getAccessoryChildren()` should treat zero as
@@ -60076,7 +60098,7 @@ var gasCapability = {
 };
 var HeatingValveStatusSchema = object({
 	/** Radiator valve opening 0 (closed) .. 100 (open). Null = not yet known. */
-	position: number().min(0).max(100).nullable(),
+	position: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Ms epoch when the slice was last updated (push or poll). */
 	lastFetchedAt: number()
 });
@@ -60119,9 +60141,9 @@ var HumidifierStatusSchema = object({
 	/** Whether the humidifier is currently on. */
 	on: boolean(),
 	/** Current measured relative humidity (0..100). Null when not reported. */
-	currentHumidity: number().min(0).max(100).nullable(),
+	currentHumidity: number().min(0).max(100).nullable().meta(readingMeta("humidity")),
 	/** Target relative humidity (0..100). Null when no setpoint surface. */
-	targetHumidity: number().min(0).max(100).nullable(),
+	targetHumidity: number().min(0).max(100).nullable().meta(readingMeta("humidity")),
 	/** Active mode (`auto` / `normal` / `baby` / vendor). Null when the
 	*  device has no mode surface. */
 	mode: string().nullable(),
@@ -60131,9 +60153,9 @@ var HumidifierStatusSchema = object({
 	*  `idle` / `off`). Null when the device doesn't report it. */
 	action: string().nullable(),
 	/** HA `min_humidity` attribute. Null → UI uses 0. */
-	minHumidity: number().nullable(),
+	minHumidity: number().nullable().meta(readingMeta("humidity")),
 	/** HA `max_humidity` attribute. Null → UI uses 100. */
-	maxHumidity: number().nullable(),
+	maxHumidity: number().nullable().meta(readingMeta("humidity")),
 	/** Ms epoch when the slice was last updated. */
 	lastChangedAt: number()
 });
@@ -60203,22 +60225,13 @@ var humidifierCapability = {
 * `sourceInfo`.
 */
 var HumiditySensorStatusSchema = object({
-	/** Current relative humidity, 0..100. */
-	percent: number().min(0).max(100).meta({
-		unit: "%",
+	/** Current relative humidity, 0..100. `null` when the sample was refused (D393). */
+	percent: number().min(0).max(100).nullable().meta(readingMeta("humidity", {
+		precision: 0,
 		label: "Humidity"
-	}),
+	})),
 	/** Ms epoch when the slice was last updated. */
-	lastFetchedAt: number(),
-	/** Live display unit from the upstream source (e.g. HA
-	*  `attributes.unit_of_measurement`). The UI prefers this over the
-	*  role's canonical unit. Absent → fall back to the canonical unit. */
-	unit: string().optional(),
-	/** Suggested decimal places for numeric display.
-	*  Populated live from the upstream source when provided (e.g. HA
-	*  `attributes.suggested_display_precision`). Falls back to
-	*  auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional()
+	lastFetchedAt: number()
 });
 var humiditySensorCapability = {
 	name: "humidity-sensor",
@@ -60249,12 +60262,7 @@ var humiditySensorCapability = {
 	} } },
 	/** Clock fields: written, but excluded from the compare that decides
 	*  whether persisting is worth a SQLite commit. */
-	volatileStateFields: ["lastFetchedAt"],
-	customize: {
-		version: 1,
-		advanced: "derive",
-		targets: []
-	}
+	volatileStateFields: ["lastFetchedAt"]
 };
 /**
 * Image display cap. Models a single still image exposed by an integration —
@@ -60275,7 +60283,7 @@ var ImageStatusSchema = object({
 	*  entity exposes no `entity_picture` (yet). */
 	url: string().nullable(),
 	/** Ms epoch of the upstream last-updated timestamp. Null at cold-start. */
-	lastUpdated: number().nullable()
+	lastUpdated: number().nullable().meta(readingMeta("none"))
 });
 var imageCapability = {
 	name: "image",
@@ -60363,19 +60371,19 @@ var NormalizedRangeSchema = object({
 */
 var ImageSettingsStatusSchema = object({
 	/** Normalized 0–100. */
-	brightness: number().optional(),
+	brightness: number().optional().meta(readingMeta("none")),
 	/** Normalized 0–100. */
-	contrast: number().optional(),
+	contrast: number().optional().meta(readingMeta("none")),
 	/** Normalized 0–100. */
-	saturation: number().optional(),
+	saturation: number().optional().meta(readingMeta("none")),
 	/** Normalized 0–100. */
-	sharpness: number().optional(),
+	sharpness: number().optional().meta(readingMeta("none")),
 	mirror: boolean().optional(),
 	flip: boolean().optional(),
 	rotate: ImageRotateSchema.optional(),
 	whiteBalance: WhiteBalanceModeSchema.optional(),
 	/** Manual white-balance warmth, NORMALIZED 0–100. Meaningful only when `whiteBalance === 'manual'`. */
-	warmth: number().optional(),
+	warmth: number().optional().meta(readingMeta("none")),
 	exposureMode: ExposureModeSchema.optional(),
 	backlightMode: BacklightModeSchema.optional(),
 	lastFetchedAt: number()
@@ -60654,10 +60662,10 @@ var IntercomAbilitySchema = object({
 	/** Codecs accepted by firmware, in preference order. Driver-authored strings. */
 	codecs: array(string()),
 	/** Sample rate (Hz) the firmware expects. Reolink typical: 16000. */
-	sampleRate: number(),
+	sampleRate: number().meta(readingMeta("none")),
 	duplex: _enum(["half", "full"]),
 	/** Max in-flight audio backlog before drop (ms). Server uses this to bound latency. */
-	maxBacklogMs: number()
+	maxBacklogMs: number().meta(readingMeta("duration-ms"))
 });
 var IntercomStatusSchema = object({
 	/** True while a talk session is open. */
@@ -60884,13 +60892,13 @@ var LawnMowerControlStatusSchema = object({
 	activity: LawnMowerActivitySchema,
 	/** 0..100 battery percentage. Null when the device has no battery
 	*  reading. */
-	batteryLevel: number().min(0).max(100).nullable(),
+	batteryLevel: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** 0..100 mowing-completion percentage of the current task, or null when no
 	*  task is active / progress is unavailable. */
-	progressPercent: number().min(0).max(100).nullable(),
+	progressPercent: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Current device/event code (dynamic — mostly status, sometimes an error),
 	*  or null when unknown. */
-	currentCode: number().nullable(),
+	currentCode: number().nullable().meta(readingMeta("none")),
 	/** Human label for {@link currentCode}, or null when undecodable. */
 	currentCodeLabel: string().nullable(),
 	/** Severity of {@link currentCode}. `error` (and often `warning`) warrants UI
@@ -61423,7 +61431,7 @@ var MediaPlayerStatusSchema = object({
 	state: MediaPlayerStateSchema,
 	/** Volume as 0..100 inclusive. Null when the device has no volume
 	*  surface. Pair with `DeviceFeature.MediaPlayerVolume`. */
-	volumeLevel: number().min(0).max(100).nullable(),
+	volumeLevel: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Mute toggle distinct from volume=0. Null when no mute surface.
 	*  Pair with `DeviceFeature.MediaPlayerMute`. */
 	isMuted: boolean().nullable(),
@@ -61436,10 +61444,10 @@ var MediaPlayerStatusSchema = object({
 	currentMedia: MediaInfoSchema.nullable(),
 	/** Current playback position in ms. Null when not seekable or
 	*  nothing is playing. Pair with `DeviceFeature.MediaPlayerSeek`. */
-	positionMs: number().int().nonnegative().nullable(),
+	positionMs: number().int().nonnegative().nullable().meta(readingMeta("duration-ms")),
 	/** Total duration of the current media in ms. Null when unknown
 	*  (live stream) or nothing is playing. */
-	durationMs: number().int().nonnegative().nullable(),
+	durationMs: number().int().nonnegative().nullable().meta(readingMeta("duration-ms")),
 	/** Shuffle toggle. Null when no shuffle surface.
 	*  Pair with `DeviceFeature.MediaPlayerShuffle`. */
 	shuffle: boolean().nullable(),
@@ -61748,7 +61756,7 @@ var motionCustomize = {
 			eventName: "onMotionChanged"
 		},
 		deviceTypes: [DeviceType.Camera],
-		apply: "replace",
+		apply: "add",
 		applyAuthority: {
 			kind: "camera-sensors",
 			timeoutField: "motionCooldownMs"
@@ -61820,7 +61828,7 @@ var MotionStatusSchema = object({
 	* it, every provider seeded it at boot, and every session left it
 	* `detected: true` after its detach.
 	*/
-	autoClearAfterMs: number().nullable()
+	autoClearAfterMs: number().nullable().meta(readingMeta("duration-ms"))
 });
 /**
 * Payload of `motion.onMotionChanged` event + the corresponding bus
@@ -62002,7 +62010,7 @@ var MotionZoneRegionSchema = object({
 *  the grid region(s). */
 var MotionZoneStatusSchema = object({
 	enabled: boolean(),
-	sensitivity: number(),
+	sensitivity: number().meta(readingMeta("none")),
 	/** Grid region(s). Today exactly one `grid` shape. */
 	regions: array(MotionZoneRegionSchema),
 	lastFetchedAt: number()
@@ -62372,7 +62380,7 @@ var NavigationStatusSchema = object({
 	following: boolean(),
 	flash: boolean(),
 	lightMode: NavigationLightModeSchema,
-	lightLevel: number().min(40).max(100),
+	lightLevel: number().min(40).max(100).meta(readingMeta("none")),
 	/** Ms epoch when the slice was last updated. */
 	lastChangedAt: number()
 });
@@ -62506,13 +62514,13 @@ var NetworkLinkStatusSchema = object({
 	* one whose reading has not landed must not be drawn at 0 %. Consumers
 	* SKIP a null rather than coerce it.
 	*/
-	signalPercent: number().min(0).max(100).nullable(),
+	signalPercent: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Raw received signal strength in dBm, when the firmware reports one. */
-	rssiDbm: number().optional(),
+	rssiDbm: number().optional().meta(readingMeta("signal-level")),
 	/** Network name of a wireless link, when the firmware reports it. */
 	ssid: string().optional(),
 	/** Ms epoch of the last observation. Lets consumers reason about freshness. */
-	lastUpdated: number()
+	lastUpdated: number().meta(readingMeta("none"))
 });
 var networkLinkCapability = {
 	name: "network-link",
@@ -62897,7 +62905,7 @@ var NotifierStatusSchema = object({
 	lastError: string().nullable(),
 	/** Number of deliveries currently buffered server-side (rate-limited
 	*  notifiers may queue). 0 when the provider sends synchronously. */
-	queueDepth: number().int().nonnegative(),
+	queueDepth: number().int().nonnegative().meta(readingMeta("count")),
 	/** Per-feature capability matrix — authoritative source for the
 	*  compose-form field gating. */
 	supports: NotifierSupportsSchema
@@ -62989,11 +62997,9 @@ onSent: { data: object({
 * cap fits (HA `sensor` whose `device_class` we don't have a typed cap
 * for: water flow, distance, weight, frequency, signal strength, …).
 *
-* The `unit` and `precision` fields carry the live display metadata that
-* the upstream source provides with each state push (HA
-* `attributes.unit_of_measurement` / `attributes.suggested_display_precision`).
-* The UI reads them directly from the slice — they are the single source
-* of truth for generic numeric rendering and do NOT live on `sourceInfo`.
+* The quantity is not on this slice. It is chosen when the device is
+* adopted and stored once on `SourceInfo.quantity` (D944). `value` is in
+* that quantity's base unit. `null` is a refused sample (D393).
 *
 * Prefer the typed alternatives (`temperature-sensor`, `humidity-sensor`,
 * `ambient-light-sensor`, `pressure-sensor`, `power-meter`,
@@ -63002,15 +63008,8 @@ onSent: { data: object({
 * numeric values land here.
 */
 var NumericSensorStatusSchema = object({
-	value: number(),
-	/** Display unit-of-measurement (e.g. 'dBm', 's', 'rpm', 'steps').
-	*  Populated live from the upstream source on each state push.
-	*  Absent for unitless sensors. */
-	unit: string().optional(),
-	/** Suggested decimal places for numeric display.
-	*  Populated live from the upstream source when provided.
-	*  Falls back to auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional(),
+	/** Reading in the device quantity's base unit. `null` when refused (D393). */
+	value: number().nullable().meta(readingMeta("device")),
 	/** Ms epoch when the slice was last updated. */
 	lastFetchedAt: number()
 });
@@ -63034,11 +63033,11 @@ var numericSensorCapability = {
 	*/
 	durability: "restored",
 	/**
-	* History (D850): recorded series. The unit is per device, read from the sibling `unit` field.
+	* History (D850): recorded series. The unit is the device quantity's base,
+	* resolved when the series is read — the cap has no single unit.
 	*/
 	history: { fields: { value: {
 		kind: "gauge",
-		unitFrom: "unit",
 		minIntervalMs: 3e4
 	} } },
 	/** Clock fields: written, but excluded from the compare that decides
@@ -63330,23 +63329,26 @@ var PetFeederStatusSchema = object({
 	/** Food currently in the bowl (grams). Null when the device has not
 	*  reported a reading yet. On dual-hopper models this is the combined
 	*  bowl reading; per-hopper levels live in `food1`/`food2`. */
-	foodLevel: number().nullable(),
+	foodLevel: number().nullable().meta(readingMeta("none")),
 	/** Hopper-1 food level (grams) on dual-hopper feeders; null on
 	*  single-hopper models. */
-	food1: number().nullable(),
+	food1: number().nullable().meta(readingMeta("none")),
 	/** Hopper-2 food level (grams) on dual-hopper feeders; null on
 	*  single-hopper models. */
-	food2: number().nullable(),
+	food2: number().nullable().meta(readingMeta("none")),
 	/** Derived low-food flag — mirrors the HA `food_level` binary_sensor
 	*  (`device_class: problem`, on = low). True when the bowl is empty /
 	*  below the feeder's low threshold. */
 	lowFood: boolean(),
 	/** Battery charge 0..100 (%). Null on mains-powered models or when the
 	*  device has no battery reading. */
-	batteryPower: number().min(0).max(100).nullable(),
-	/** Days of desiccant life remaining. Null when the model has no
-	*  desiccant sensor. */
-	desiccantLeftDays: number().nullable(),
+	batteryPower: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
+	/**
+	* Desiccant life remaining, stored in seconds (duration base, D944).
+	* Providers convert from the days the feeder reports. Null when the
+	* model has no desiccant sensor.
+	*/
+	desiccantLeftDays: number().nullable().meta(readingMeta("duration")),
 	/** True while a feed is in progress. */
 	feeding: boolean(),
 	/** Decoded connectivity / power status (HA petkit device-status enum).
@@ -63357,7 +63359,7 @@ var PetFeederStatusSchema = object({
 	*  with `errorCode` for consumers that want the raw integer. */
 	error: string().nullable(),
 	/** Raw device error code (0 / null = no error). */
-	errorCode: number().nullable(),
+	errorCode: number().nullable().meta(readingMeta("none")),
 	/** True for D4S/D4SH dual-hopper hardware — gates the per-hopper UI. */
 	isDualHopper: boolean(),
 	/** Child-lock (manual-lock) setting — buttons on the unit are disabled. */
@@ -63367,7 +63369,7 @@ var PetFeederStatusSchema = object({
 	/** Play a chime when dispensing. */
 	feedSound: boolean(),
 	/** Speaker / prompt volume level (device-scaled integer). */
-	volume: number(),
+	volume: number().meta(readingMeta("none")),
 	/** Ms epoch when the slice was last refreshed from the cloud. */
 	lastFetchedAt: number()
 });
@@ -63486,7 +63488,7 @@ var petFeederCapability = {
 		},
 		desiccantLeftDays: {
 			kind: "gauge",
-			unit: "days"
+			unit: "s"
 		}
 	} }
 };
@@ -63887,36 +63889,19 @@ method(_void(), PlatformCapabilitiesSchema), method(_void(), HardwareInfoSchema)
 */
 var PowerMeterStatusSchema = object({
 	/** Instantaneous power draw in watts. */
-	watts: number().optional().meta({
-		unit: "W",
-		label: "Power"
-	}),
+	watts: number().optional().meta(readingMeta("power", { label: "Power" })),
 	/** Cumulative energy in kilowatt-hours since the meter was reset. */
-	kwhTotal: number().optional().meta({
-		unit: "kWh",
-		label: "Energy"
-	}),
+	kwhTotal: number().optional().meta(readingMeta("energy", { label: "Energy" })),
 	/** Voltage in volts. */
-	volts: number().optional(),
+	volts: number().optional().meta(readingMeta("voltage")),
 	/** Current in amperes. */
-	amps: number().optional(),
-	/** Apparent power in volt-amperes (W × power-factor reciprocal). */
-	va: number().optional(),
+	amps: number().optional().meta(readingMeta("current")),
+	/** Apparent power in volt-amperes. */
+	va: number().optional().meta(readingMeta("apparent-power")),
 	/** Power factor (0..1) if reported. */
-	powerFactor: number().min(0).max(1).optional(),
+	powerFactor: number().min(0).max(1).optional().meta(readingMeta("ratio")),
 	/** Ms epoch when the slice was last updated. */
-	lastFetchedAt: number(),
-	/** Live display unit of the single metric this slice carries (e.g. HA
-	*  `attributes.unit_of_measurement` → 'V' / 'A' / 'W' / 'kW' / 'kWh').
-	*  Each upstream `sensor.*` entity surfaces ONE device_class, so one
-	*  unit per slice is unambiguous. The UI prefers this over the role's
-	*  canonical unit so a 'kW' / 'Wh' feed renders verbatim. */
-	unit: string().optional(),
-	/** Suggested decimal places for numeric display.
-	*  Populated live from the upstream source when provided (e.g. HA
-	*  `attributes.suggested_display_precision`). Falls back to
-	*  auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional()
+	lastFetchedAt: number()
 });
 var powerMeterCapability = {
 	name: "power-meter",
@@ -63980,12 +63965,7 @@ var powerMeterCapability = {
 	} },
 	/** Clock fields: written, but excluded from the compare that decides
 	*  whether persisting is worth a SQLite commit. */
-	volatileStateFields: ["lastFetchedAt"],
-	customize: {
-		version: 1,
-		advanced: "derive",
-		targets: []
-	}
+	volatileStateFields: ["lastFetchedAt"]
 };
 /**
 * Presence cap. Models HA `person.*` and `device_tracker.*` entities
@@ -64005,11 +63985,11 @@ var powerMeterCapability = {
 */
 var GpsLocationSchema = object({
 	/** Latitude in decimal degrees, -90..90. */
-	latitude: number().min(-90).max(90),
+	latitude: number().min(-90).max(90).meta(readingMeta("angle")),
 	/** Longitude in decimal degrees, -180..180. */
-	longitude: number().min(-180).max(180),
+	longitude: number().min(-180).max(180).meta(readingMeta("angle")),
 	/** Reported accuracy in meters (lower = better). */
-	accuracyMeters: number().nonnegative()
+	accuracyMeters: number().nonnegative().meta(readingMeta("length"))
 });
 var PresenceStatusSchema = object({
 	/** `home` / `not_home` / any user-defined zone name. */
@@ -64021,7 +64001,7 @@ var PresenceStatusSchema = object({
 	gps: GpsLocationSchema.nullable(),
 	/** Optional battery level of the tracking device (0..100). Null
 	*  when not reported. */
-	batteryPercent: number().min(0).max(100).nullable(),
+	batteryPercent: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Ms epoch when the slice was last updated. */
 	lastChangedAt: number()
 });
@@ -64071,19 +64051,10 @@ var presenceCapability = {
 * `sourceInfo`.
 */
 var PressureSensorStatusSchema = object({
-	/** Current pressure in hPa. */
-	hpa: number(),
+	/** Current pressure in hPa. `null` when the sample was refused (D393). */
+	hpa: number().nullable().meta(readingMeta("pressure", { precision: 0 })),
 	/** Ms epoch when the slice was last updated. */
-	lastFetchedAt: number(),
-	/** Live display unit from the upstream source (e.g. HA
-	*  `attributes.unit_of_measurement`). The UI prefers this over the
-	*  role's canonical unit. Absent → fall back to the canonical unit. */
-	unit: string().optional(),
-	/** Suggested decimal places for numeric display.
-	*  Populated live from the upstream source when provided (e.g. HA
-	*  `attributes.suggested_display_precision`). Falls back to
-	*  auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional()
+	lastFetchedAt: number()
 });
 var pressureSensorCapability = {
 	name: "pressure-sensor",
@@ -64497,8 +64468,8 @@ DeviceType.Camera, method(PtzMoveCommandSchema.extend({ deviceId: number() }), _
 }), _void(), { kind: "mutation" });
 var PtzAutotrackSettingsSchema = object({
 	targetType: string().describe("Vendor target string (people/vehicle/pet); empty = camera default"),
-	stopDelaySeconds: number().int().min(0).max(300),
-	disappearDelaySeconds: number().int().min(0).max(300)
+	stopDelaySeconds: number().int().min(0).max(300).meta(readingMeta("duration")),
+	disappearDelaySeconds: number().int().min(0).max(300).meta(readingMeta("duration"))
 });
 /**
 * One option the camera advertises as a valid `targetType`. Drivers
@@ -64652,7 +64623,7 @@ var RunningStateStatusSchema = object({
 	/** null = unknown — never coerced to false (D393). */
 	running: boolean().nullable(),
 	/** Epoch ms the current boolean began; null while `running` is null. */
-	since: number().nullable(),
+	since: number().nullable().meta(readingMeta("none")),
 	source: RunningStateSourceSchema.meta({ label: "Source" }),
 	phase: string().nullable(),
 	/** null until a reading has been published (D393). */
@@ -64667,7 +64638,6 @@ var RUNNING_DEVICE_TYPES = Object.values(DeviceType);
 /** Generic Customize target for the running boolean (D936). */
 var runningCustomize = {
 	version: 1,
-	advanced: "derive",
 	targets: [{
 		id: "running",
 		cardinality: "scalar",
@@ -64687,7 +64657,7 @@ var runningCustomize = {
 			DeviceType.Thermostat,
 			DeviceType.PetFeeder
 		],
-		apply: "add-or-replace",
+		apply: "add",
 		path: "running",
 		sources: [
 			{
@@ -65951,9 +65921,9 @@ var RecordTriggerSchema = _enum([
 */
 var RecordWindowSchema = object({
 	trigger: RecordTriggerSchema,
-	day: number().int().min(0).max(6),
-	startMinute: number().int().min(0).max(1439),
-	endMinute: number().int().min(1).max(1440)
+	day: number().int().min(0).max(6).meta(readingMeta("none")),
+	startMinute: number().int().min(0).max(1439).meta(readingMeta("none")),
+	endMinute: number().int().min(1).max(1440).meta(readingMeta("none"))
 });
 /** Status of one physical volume, as the camera itself describes it. */
 var OnboardStorageVolumeSchema = object({
@@ -66029,10 +65999,10 @@ var RecordingOnboardStatusSchema = object({
 	/** Master "record to the card at all" switch. */
 	enabled: boolean().nullable(),
 	overwriteWhenFull: boolean().nullable(),
-	preRecordSec: number().nullable(),
-	postRecordSec: number().nullable(),
+	preRecordSec: number().nullable().meta(readingMeta("duration")),
+	postRecordSec: number().nullable().meta(readingMeta("duration")),
 	/** Length of one recorded file, in minutes. */
-	segmentMinutes: number().nullable(),
+	segmentMinutes: number().nullable().meta(readingMeta("none")),
 	/** The primary track's weekly windows, flattened. */
 	windows: array(RecordWindowSchema),
 	/**
@@ -66048,7 +66018,7 @@ var RecordingOnboardStatusSchema = object({
 	* provider reporting a non-zero count also reports the schedule as not
 	* writable.
 	*/
-	unreadableWindows: number(),
+	unreadableWindows: number().meta(readingMeta("count")),
 	/**
 	* The camera is scheduled to record and has NO usable storage.
 	*
@@ -66893,7 +66863,7 @@ var CamStreamDescriptorSchema = object({
 	url: string().optional(),
 	codec: string().optional(),
 	resolution: CamStreamResolutionSchema.optional(),
-	fps: number().positive().optional(),
+	fps: number().positive().optional().meta(readingMeta("rate")),
 	label: string().optional(),
 	/** Device-level features (e.g. `battery-operated`) — drives broker policy. */
 	deviceFeatures: array(string()).optional(),
@@ -66980,18 +66950,18 @@ var StreamProfileSchema = _enum([
 ]);
 /** The current encoding config of one stream profile. */
 var StreamProfileConfigSchema = object({
-	width: number(),
-	height: number(),
+	width: number().meta(readingMeta("none")),
+	height: number().meta(readingMeta("none")),
 	codec: _enum(["h264", "h265"]),
-	framerate: number(),
-	bitrate: number(),
+	framerate: number().meta(readingMeta("rate")),
+	bitrate: number().meta(readingMeta("bitrate")),
 	bitrateMode: _enum(["vbr", "cbr"]).optional(),
 	encoderProfile: _enum([
 		"high",
 		"main",
 		"baseline"
 	]).optional(),
-	gop: number().optional(),
+	gop: number().optional().meta(readingMeta("none")),
 	/**
 	* Whether THIS profile currently carries an audio track. READ-ONLY here.
 	*
@@ -67212,12 +67182,7 @@ var switchCapability = {
 			label: "On",
 			kind: "boolean"
 		}
-	}] },
-	customize: {
-		version: 1,
-		advanced: "derive",
-		targets: []
-	}
+	}] }
 };
 /** C0 controls, DEL and the C1 range: none of them belongs in a name. */
 function hasControlCharacter(value) {
@@ -67800,35 +67765,21 @@ var tamperCapability = {
 * entries with `device_class: temperature` and any future native
 * thermometer.
 *
-* Unit normalisation: providers convert to Celsius before storing.
-* The slice value is always Celsius so cross-cap aggregators
-* (climate-control's `currentTemp`, energy analytics) can compose
-* without per-source unit fixups. The canonical display unit (`°C`) is
-* a descriptor constant in the UI (ROLE_DESCRIPTOR), not stored in
-* `sourceInfo`.
+* The number is Celsius (D944). Providers convert on ingest. A failed
+* conversion is `null`, never a guess. Display unit is a read-time preference.
 *
 * Status `lastFetchedAt` lets staleness-aware consumers detect a
 * frozen feed (provider hung) distinct from a "temperature hasn't
 * changed" steady state.
 */
 var TemperatureSensorStatusSchema = object({
-	/** Current temperature in Celsius. */
-	celsius: number().meta({
-		unit: "°C",
+	/** Current temperature in Celsius. `null` when the sample was refused (D393). */
+	celsius: number().nullable().meta(readingMeta("temperature", {
+		precision: 1,
 		label: "Temperature"
-	}),
+	})),
 	/** Ms epoch when the slice was last updated (push or poll). */
-	lastFetchedAt: number(),
-	/** Live display unit from the upstream source (e.g. HA
-	*  `attributes.unit_of_measurement`). The UI prefers this over the
-	*  role's canonical unit, so a Fahrenheit feed renders '°F' not '°C'.
-	*  Absent → the UI falls back to the role's canonical unit. */
-	unit: string().optional(),
-	/** Suggested decimal places for numeric display.
-	*  Populated live from the upstream source when provided (e.g. HA
-	*  `attributes.suggested_display_precision`). Falls back to
-	*  auto-formatting when absent. */
-	precision: number().int().min(0).max(10).optional()
+	lastFetchedAt: number()
 });
 var temperatureSensorCapability = {
 	name: "temperature-sensor",
@@ -67859,12 +67810,7 @@ var temperatureSensorCapability = {
 	} } },
 	/** Clock fields: written, but excluded from the compare that decides
 	*  whether persisting is worth a SQLite commit. */
-	volatileStateFields: ["lastFetchedAt"],
-	customize: {
-		version: 1,
-		advanced: "derive",
-		targets: []
-	}
+	volatileStateFields: ["lastFetchedAt"]
 };
 /**
 * toast — system-scoped singleton capability that streams toast
@@ -68147,16 +68093,16 @@ var VacuumControlStatusSchema = object({
 	]),
 	/** 0..100 battery percentage. Null when the device has no battery
 	*  reading. */
-	batteryLevel: number().min(0).max(100).nullable(),
+	batteryLevel: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Current fan-speed token (provider-verbatim). Null when unknown or
 	*  the vacuum has no speed control. */
 	fanSpeed: string().nullable(),
 	/** Speed tokens the hardware accepts — drives the UI selector. */
 	availableFanSpeeds: array(string()),
 	/** 0..100 cleaning-completion percentage of the current task, or null. */
-	progressPercent: number().min(0).max(100).nullable(),
+	progressPercent: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Current error code (0 / null = no error). */
-	errorCode: number().nullable(),
+	errorCode: number().nullable().meta(readingMeta("none")),
 	/** Human label for {@link errorCode}, or null when none / undecodable. */
 	errorLabel: string().nullable(),
 	/** Ms epoch when the slice was last updated. */
@@ -68234,7 +68180,7 @@ var ValveStatusSchema = object({
 	]),
 	/** 0 = fully closed, 100 = fully open. Null when the device has no
 	*  intermediate position surface. */
-	position: number().min(0).max(100).nullable(),
+	position: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
 	/** Ms epoch when the slice was last updated. */
 	lastChangedAt: number()
 });
@@ -68342,9 +68288,9 @@ var vibrationCapability = {
 */
 var WaterHeaterStatusSchema = object({
 	/** Current measured temperature. Null when not reported. */
-	currentTemp: number().nullable(),
+	currentTemp: number().nullable().meta(readingMeta("temperature")),
 	/** Target temperature setpoint. Null when no setpoint surface. */
-	targetTemp: number().nullable(),
+	targetTemp: number().nullable().meta(readingMeta("temperature")),
 	/** Active operation mode = HA `state` (`eco` / `electric` / `gas` /
 	*  `heat_pump` / `high_demand` / `performance` / `off`). Null when the
 	*  device reports an unknown state. */
@@ -68355,9 +68301,9 @@ var WaterHeaterStatusSchema = object({
 	*  has no away surface. */
 	away: boolean().nullable(),
 	/** HA `min_temp` attribute. Null when not reported. */
-	minTemp: number().nullable(),
+	minTemp: number().nullable().meta(readingMeta("temperature")),
 	/** HA `max_temp` attribute. Null when not reported. */
-	maxTemp: number().nullable(),
+	maxTemp: number().nullable().meta(readingMeta("temperature")),
 	/** Ms epoch when the slice was last updated. */
 	lastChangedAt: number()
 });
@@ -68442,25 +68388,18 @@ var waterHeaterCapability = {
 * Forecast deferred — current conditions only for v1.
 */
 var WeatherStatusSchema = object({
-	/** Verbatim HA condition state (`sunny`, `cloudy`, `rainy`, …). Null
-	*  when no condition has been reported yet. */
+	/** Verbatim condition state (`sunny`, `cloudy`, `rainy`, …). Null when none yet. */
 	condition: string().nullable(),
-	/** Current temperature in the reported unit. Null when not provided. */
-	temperature: number().nullable(),
-	/** Temperature unit string (e.g. `°C` / `°F`). Null when not provided. */
-	temperatureUnit: string().nullable(),
+	/** Current temperature in Celsius. Null when not provided or refused. */
+	temperature: number().nullable().meta(readingMeta("temperature", { precision: 1 })),
 	/** Relative humidity (0..100). Null when not provided. */
-	humidity: number().min(0).max(100).nullable(),
-	/** Barometric pressure in the reported unit. Null when not provided. */
-	pressure: number().nullable(),
-	/** Pressure unit string (e.g. `hPa` / `inHg`). Null when not provided. */
-	pressureUnit: string().nullable(),
-	/** Wind speed in the reported unit. Null when not provided. */
-	windSpeed: number().nullable(),
-	/** Wind-speed unit string (e.g. `km/h` / `mph`). Null when not provided. */
-	windSpeedUnit: string().nullable(),
+	humidity: number().min(0).max(100).nullable().meta(readingMeta("humidity")),
+	/** Barometric pressure in hPa. Null when not provided or refused. */
+	pressure: number().nullable().meta(readingMeta("pressure")),
+	/** Wind speed in metres per second. Null when not provided or refused. */
+	windSpeed: number().nullable().meta(readingMeta("speed")),
 	/** Wind bearing in degrees (0..360, meteorological). Null when not provided. */
-	windBearing: number().nullable(),
+	windBearing: number().nullable().meta(readingMeta("angle")),
 	/** Ms epoch when the slice was last updated. */
 	lastFetchedAt: number()
 });
@@ -68488,12 +68427,12 @@ var weatherCapability = {
 	*/
 	durability: "session",
 	/**
-	* History (D850): recorded series. Units follow the sibling `*Unit` fields.
+	* History (D850): recorded series. Numbers are the quantity base (D944).
 	*/
 	history: { fields: {
 		temperature: {
 			kind: "gauge",
-			unitFrom: "temperatureUnit",
+			unit: "°C",
 			deadband: .2
 		},
 		humidity: {
@@ -68503,12 +68442,12 @@ var weatherCapability = {
 		},
 		pressure: {
 			kind: "gauge",
-			unitFrom: "pressureUnit",
+			unit: "hPa",
 			deadband: .5
 		},
 		windSpeed: {
 			kind: "gauge",
-			unitFrom: "windSpeedUnit",
+			unit: "m/s",
 			deadband: .5
 		}
 	} }
@@ -69409,6 +69348,389 @@ method(object({}), array(TrainingBaseModelSchema).readonly(), { auth: "admin" })
 	kind: "mutation",
 	auth: "admin"
 });
+/**
+* Frozen unit → spec table. `•` in the doc marks each dimension's canonical
+* unit (`factor: 1, offset: 0`). °F derives from `°C = (°F − 32) × 5/9` ⇒
+* `factor = 5/9`, `offset = -160/9` (kept as exact expressions, not rounded
+* decimals). K derives from `°C = K − 273.15`.
+*/
+var UNIT_TABLE = {
+	"°C": {
+		dimension: "temperature",
+		factor: 1,
+		offset: 0
+	},
+	"°F": {
+		dimension: "temperature",
+		factor: 5 / 9,
+		offset: -160 / 9
+	},
+	K: {
+		dimension: "temperature",
+		factor: 1,
+		offset: -273.15
+	},
+	hPa: {
+		dimension: "pressure",
+		factor: 1,
+		offset: 0
+	},
+	kPa: {
+		dimension: "pressure",
+		factor: 10,
+		offset: 0
+	},
+	Pa: {
+		dimension: "pressure",
+		factor: .01,
+		offset: 0
+	},
+	mbar: {
+		dimension: "pressure",
+		factor: 1,
+		offset: 0
+	},
+	bar: {
+		dimension: "pressure",
+		factor: 1e3,
+		offset: 0
+	},
+	inHg: {
+		dimension: "pressure",
+		factor: 33.8639,
+		offset: 0
+	},
+	mmHg: {
+		dimension: "pressure",
+		factor: 1.33322,
+		offset: 0
+	},
+	psi: {
+		dimension: "pressure",
+		factor: 68.9476,
+		offset: 0
+	},
+	"m/s": {
+		dimension: "speed",
+		factor: 1,
+		offset: 0
+	},
+	"km/h": {
+		dimension: "speed",
+		factor: 1 / 3.6,
+		offset: 0
+	},
+	mph: {
+		dimension: "speed",
+		factor: .44704,
+		offset: 0
+	},
+	kn: {
+		dimension: "speed",
+		factor: .514444,
+		offset: 0
+	},
+	"mm/h": {
+		dimension: "precipitation-rate",
+		factor: 1,
+		offset: 0
+	},
+	"in/h": {
+		dimension: "precipitation-rate",
+		factor: 25.4,
+		offset: 0
+	},
+	m: {
+		dimension: "length",
+		factor: 1,
+		offset: 0
+	},
+	mm: {
+		dimension: "length",
+		factor: .001,
+		offset: 0
+	},
+	cm: {
+		dimension: "length",
+		factor: .01,
+		offset: 0
+	},
+	km: {
+		dimension: "length",
+		factor: 1e3,
+		offset: 0
+	},
+	in: {
+		dimension: "length",
+		factor: .0254,
+		offset: 0
+	},
+	ft: {
+		dimension: "length",
+		factor: .3048,
+		offset: 0
+	},
+	mi: {
+		dimension: "length",
+		factor: 1609.344,
+		offset: 0
+	},
+	"m²": {
+		dimension: "area",
+		factor: 1,
+		offset: 0
+	},
+	lx: {
+		dimension: "illuminance",
+		factor: 1,
+		offset: 0
+	},
+	"W/m²": {
+		dimension: "irradiance",
+		factor: 1,
+		offset: 0
+	},
+	W: {
+		dimension: "power",
+		factor: 1,
+		offset: 0
+	},
+	kW: {
+		dimension: "power",
+		factor: 1e3,
+		offset: 0
+	},
+	VA: {
+		dimension: "apparent-power",
+		factor: 1,
+		offset: 0
+	},
+	Wh: {
+		dimension: "energy",
+		factor: 1,
+		offset: 0
+	},
+	kWh: {
+		dimension: "energy",
+		factor: 1e3,
+		offset: 0
+	},
+	MWh: {
+		dimension: "energy",
+		factor: 1e6,
+		offset: 0
+	},
+	V: {
+		dimension: "voltage",
+		factor: 1,
+		offset: 0
+	},
+	mV: {
+		dimension: "voltage",
+		factor: .001,
+		offset: 0
+	},
+	A: {
+		dimension: "current",
+		factor: 1,
+		offset: 0
+	},
+	mA: {
+		dimension: "current",
+		factor: .001,
+		offset: 0
+	},
+	ppm: {
+		dimension: "concentration-volume",
+		factor: 1,
+		offset: 0
+	},
+	ppb: {
+		dimension: "concentration-volume",
+		factor: .001,
+		offset: 0
+	},
+	"µg/m³": {
+		dimension: "concentration-mass",
+		factor: 1,
+		offset: 0
+	},
+	"mg/m³": {
+		dimension: "concentration-mass",
+		factor: 1e3,
+		offset: 0
+	},
+	kg: {
+		dimension: "mass",
+		factor: 1,
+		offset: 0
+	},
+	g: {
+		dimension: "mass",
+		factor: .001,
+		offset: 0
+	},
+	lb: {
+		dimension: "mass",
+		factor: .453592,
+		offset: 0
+	},
+	oz: {
+		dimension: "mass",
+		factor: .0283495,
+		offset: 0
+	},
+	"%": {
+		dimension: "percentage",
+		factor: 1,
+		offset: 0
+	},
+	L: {
+		dimension: "volume",
+		factor: 1,
+		offset: 0
+	},
+	mL: {
+		dimension: "volume",
+		factor: .001,
+		offset: 0
+	},
+	gal: {
+		dimension: "volume",
+		factor: 3.785411784,
+		offset: 0
+	},
+	s: {
+		dimension: "duration",
+		factor: 1,
+		offset: 0
+	},
+	ms: {
+		dimension: "duration",
+		factor: .001,
+		offset: 0
+	},
+	min: {
+		dimension: "duration",
+		factor: 60,
+		offset: 0
+	},
+	h: {
+		dimension: "duration",
+		factor: 3600,
+		offset: 0
+	},
+	d: {
+		dimension: "duration",
+		factor: 86400,
+		offset: 0
+	},
+	B: {
+		dimension: "information",
+		factor: 1,
+		offset: 0
+	},
+	KiB: {
+		dimension: "information",
+		factor: 1024,
+		offset: 0
+	},
+	MiB: {
+		dimension: "information",
+		factor: 1024 ** 2,
+		offset: 0
+	},
+	GiB: {
+		dimension: "information",
+		factor: 1024 ** 3,
+		offset: 0
+	},
+	TiB: {
+		dimension: "information",
+		factor: 1024 ** 4,
+		offset: 0
+	},
+	kB: {
+		dimension: "information",
+		factor: 1e3,
+		offset: 0
+	},
+	MB: {
+		dimension: "information",
+		factor: 1e6,
+		offset: 0
+	},
+	GB: {
+		dimension: "information",
+		factor: 1e9,
+		offset: 0
+	},
+	"°": {
+		dimension: "angle",
+		factor: 1,
+		offset: 0
+	},
+	dBFS: {
+		dimension: "sound-level",
+		factor: 1,
+		offset: 0
+	},
+	dBm: {
+		dimension: "signal-level",
+		factor: 1,
+		offset: 0
+	},
+	mired: {
+		dimension: "colour-temperature",
+		factor: 1,
+		offset: 0
+	},
+	kbps: {
+		dimension: "bitrate",
+		factor: 1,
+		offset: 0
+	},
+	Mbps: {
+		dimension: "bitrate",
+		factor: 1e3,
+		offset: 0
+	},
+	fps: {
+		dimension: "rate",
+		factor: 1,
+		offset: 0
+	}
+};
+/** Resolve a unit's `UnitSpec`, or `undefined` when the spelling is unknown. */
+function specFor(unit) {
+	return Object.hasOwn(UNIT_TABLE, unit) ? UNIT_TABLE[unit] : void 0;
+}
+/** The dimension a unit belongs to, or `undefined` for an unknown unit. */
+function unitDimension(unit) {
+	return specFor(unit)?.dimension;
+}
+/** Value in `spec`'s unit → its dimension's canonical unit. */
+function toCanonical(value, spec) {
+	return value * spec.factor + spec.offset;
+}
+/** Canonical-unit value → the unit described by `spec`. */
+function fromCanonical(canonical, spec) {
+	return (canonical - spec.offset) / spec.factor;
+}
+/**
+* Graceful variant for the render path: returns the converted value, or
+* `undefined` when the conversion is refused (unknown unit / cross-dimension).
+* Never throws — a render caller falls back to the raw value + source unit.
+*/
+function tryConvertUnit(value, from, to) {
+	if (from === to) return value;
+	const fromSpec = specFor(from);
+	if (!fromSpec) return void 0;
+	const toSpec = specFor(to);
+	if (!toSpec) return void 0;
+	if (fromSpec.dimension !== toSpec.dimension) return void 0;
+	return fromCanonical(toCanonical(value, fromSpec), toSpec);
+}
 SOURCE_CAPS.filter((cap) => cap !== "switch" && cap !== "motion");
 DeviceType.Camera, DeviceType.Sensor, DeviceType.Button, DeviceType.Switch, DeviceType.PetFeeder, DeviceType.Container, DeviceType.Thermostat, DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Camera, DeviceType.Camera, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
 String.raw`rose\(active(\d+), changed(\d+), (\d+(?:\.\d+)?)\)`;
@@ -84078,7 +84400,6 @@ var SENSOR_CAP_VOCABULARY = {
 			field: "value",
 			quantity: t("the reading", "il valore"),
 			label: t("Reading", "Valore"),
-			unitField: "unit",
 			icon: "gauge"
 		}]
 	},
@@ -84214,7 +84535,7 @@ var SENSOR_CAP_VOCABULARY = {
 				field: "temperature",
 				quantity: t("the outdoor temperature", "la temperatura esterna"),
 				label: t("Temperature", "Temperatura"),
-				unitField: "temperatureUnit",
+				unit: "°C",
 				icon: "thermometer"
 			},
 			{
@@ -84230,7 +84551,7 @@ var SENSOR_CAP_VOCABULARY = {
 				field: "windSpeed",
 				quantity: t("the wind speed", "la velocità del vento"),
 				label: t("Wind", "Vento"),
-				unitField: "windSpeedUnit",
+				unit: "m/s",
 				icon: "wind"
 			},
 			{
@@ -84238,7 +84559,7 @@ var SENSOR_CAP_VOCABULARY = {
 				field: "pressure",
 				quantity: t("the air pressure", "la pressione atmosferica"),
 				label: t("Pressure", "Pressione"),
-				unitField: "pressureUnit",
+				unit: "hPa",
 				icon: "gauge"
 			}
 		]
@@ -88604,6 +88925,96 @@ DEFAULT_NATIVE_LEASE_SETTINGS.tileBudgetMb;
 DEFAULT_NATIVE_LEASE_SETTINGS.sceneBudgetMb;
 DEFAULT_NATIVE_LEASE_SETTINGS.admission;
 /**
+* Convert an upstream number into the stored base of its quantity (D944 §4).
+* An unknown unit or a unit from another dimension is a refusal: the caller
+* logs it and publishes null (D393). This function never guesses.
+*/
+var DIMENSION_QUANTITY = {
+	temperature: "temperature",
+	pressure: "pressure",
+	speed: "speed",
+	"precipitation-rate": "precipitation-rate",
+	length: "length",
+	area: "area",
+	illuminance: "illuminance",
+	irradiance: "irradiance",
+	power: "power",
+	"apparent-power": "apparent-power",
+	energy: "energy",
+	voltage: "voltage",
+	current: "current",
+	"concentration-volume": "concentration-volume",
+	"concentration-mass": "concentration-mass",
+	mass: "mass",
+	percentage: "percentage",
+	volume: "volume",
+	duration: "duration",
+	information: "information",
+	angle: "angle",
+	"sound-level": "sound-level",
+	"signal-level": "signal-level",
+	"colour-temperature": "colour-temperature",
+	bitrate: "bitrate",
+	rate: "rate"
+};
+/**
+* Quantity implied by a unit symbol. `ppb` and `ms` are the two symbols
+* whose stored base is not the dimension's canonical unit. `mm` is length;
+* precipitation is chosen by the caller (a device class), not by the symbol.
+*/
+function quantityFromUnit(rawUnit) {
+	const unit = normalizeUnit(rawUnit);
+	if (unit === void 0) return void 0;
+	if (unit === "ppb") return "concentration-ppb";
+	if (unit === "ms") return "duration-ms";
+	const dimension = unitDimension(unit);
+	if (dimension === void 0) return void 0;
+	return DIMENSION_QUANTITY[dimension];
+}
+function ingestReading(input) {
+	if (!Number.isFinite(input.value)) return {
+		ok: false,
+		reason: "non-finite"
+	};
+	if (input.quantity === "device") return {
+		ok: false,
+		reason: "unknown-unit"
+	};
+	const raw = input.rawUnit?.trim();
+	if (raw === void 0 || raw.length === 0) return {
+		ok: true,
+		value: input.value
+	};
+	const unit = normalizeUnit(raw);
+	if (unit === void 0) return {
+		ok: false,
+		reason: "unknown-unit"
+	};
+	const base = baseUnitOf(input.quantity);
+	if (base === void 0) {
+		if (unitDimension(unit) !== void 0) return {
+			ok: false,
+			reason: "cross-dimension"
+		};
+		return {
+			ok: false,
+			reason: "unknown-unit"
+		};
+	}
+	const converted = tryConvertUnit(input.value, unit, base);
+	if (converted === void 0) return unitDimension(unit) === void 0 ? {
+		ok: false,
+		reason: "unknown-unit"
+	} : {
+		ok: false,
+		reason: "cross-dimension"
+	};
+	return {
+		ok: true,
+		value: converted
+	};
+}
+/**
 * Pure fuzzy matcher for adoption location import. Normalized
 * case-insensitive Levenshtein similarity, used to reuse an existing
 * CamStack location when an imported source location (e.g. an HA area) is
@@ -114238,11 +114649,7 @@ var hmDiagnosticSchema = hmChildSchema.extend({
 	sourceParams: array(string()).min(1)
 });
 /** Cold-start slices keyed by cap. */
-var COLD_NUMERIC = (unit) => unit !== void 0 ? {
-	value: 0,
-	unit,
-	lastFetchedAt: 0
-} : {
+var COLD_NUMERIC = {
 	value: 0,
 	lastFetchedAt: 0
 };
@@ -114286,7 +114693,7 @@ var HmDiagnosticDevice = class extends HmChildDevice {
 				this.runtimeState.setCapState("temperature-sensor", COLD_TEMP);
 				return;
 			default: {
-				const cold = COLD_NUMERIC(this.unit);
+				const cold = COLD_NUMERIC;
 				this.ctx.registerNativeCap(numericSensorCapability, { getStatus: async () => this.runtimeState.getCapState("numeric-sensor") ?? cold });
 				this.runtimeState.setCapState("numeric-sensor", cold);
 				return;
@@ -114311,22 +114718,55 @@ var HmDiagnosticDevice = class extends HmChildDevice {
 			return;
 		}
 		if (typeof value !== "number") return;
+		const stored = this.toBase(value);
+		if (stored === null) return;
 		if (this.capName === "temperature-sensor") {
 			this.runtimeState.setCapState("temperature-sensor", {
-				celsius: value,
+				celsius: stored,
 				lastFetchedAt: now
 			});
 			return;
 		}
-		const next = this.unit !== void 0 ? {
-			value,
-			unit: this.unit,
+		this.runtimeState.setCapState("numeric-sensor", {
+			value: stored,
 			lastFetchedAt: now
-		} : {
+		});
+	}
+	/** Upstream diagnostic number → the quantity's base. Unknown units publish nothing. */
+	toBase(value) {
+		const quantity = this.readingQuantity();
+		if (quantity === null) {
+			this.warnRefusal("unknown-unit");
+			return null;
+		}
+		const result = ingestReading({
 			value,
-			lastFetchedAt: now
-		};
-		this.runtimeState.setCapState("numeric-sensor", next);
+			rawUnit: this.unit,
+			quantity
+		});
+		if (!result.ok) {
+			this.warnRefusal(result.reason);
+			return null;
+		}
+		if (this.capName === "numeric-sensor" && this.sourceInfo.quantity !== quantity) this.updateSourceInfo({ quantity });
+		return result.value;
+	}
+	readingQuantity() {
+		if (this.capName === "temperature-sensor") return "temperature";
+		if (this.unit === void 0) return "none";
+		const learned = quantityFromUnit(this.unit);
+		if (learned === void 0 || learned === "device") return null;
+		return learned;
+	}
+	warnRefusal(reason) {
+		this.ctx.logger.warn("numeric reading refused", {
+			tags: { deviceId: this.id },
+			meta: {
+				quantity: this.readingQuantity() ?? "device",
+				unit: this.unit ?? "",
+				reason
+			}
+		});
 	}
 };
 //#endregion