@camstack/addon-provider-homematic 1.2.104 → 1.2.106

package/dist/addon.js

@@ -19513,13 +19513,26 @@ var TrackAudioLabelSchema = object({
 *  - `audio` — an audio event on the camera itself that was anomalous for
 *    THAT camera, loud, and heard while nothing visual was happening (D62).
 *
+*  - `onboard` — the CAMERA's own firmware, paired with a decoded frame in
+*    that frame's pixel space. A real root detector and a SPATIAL one: its
+*    boxes are the same kind of fact `pipeline`'s are, produced by a different
+*    detector.
+*
+* `onboard` was missing here while `DetectionSourceSchema` already had it, so
+* a persisted onboard track failed `safeParse` on read and came back with NO
+* source at all — which `isSpatialTrack` then admitted by accident, through the
+* `undefined` arm rather than by anybody's decision, and which `excludeSources`
+* could not name.
+*
 * The spatial subsystems (tracker association, occupancy count, re-id /
 * embedding, resurrection) MUST skip every synthetic source. Test for that
-* with `isSpatialTrack`, which allow-lists `pipeline` — a `!== 'sensor'`
-* check silently readmits every source added after it was written.
+* with `isSpatialTrack`, which allow-lists the spatial sources explicitly — a
+* `!== 'sensor'` check silently readmits every source added after it was
+* written.
 */
 var TrackSourceSchema = _enum([
 	"pipeline",
+	"onboard",
 	"sensor",
 	"audio"
 ]);
@@ -20107,6 +20120,7 @@ var MediaFileKindEnum = _enum([
 	"keyFrame",
 	"keyFrameSmall",
 	"thumbnailSmall",
+	"confirmationCrop",
 	"sceneFrame"
 ]);
 /**
@@ -21601,13 +21615,39 @@ var MotionSourceEnum = _enum([
 */
 var MotionSourcesSchema = array(MotionSourceEnum);
 /**
-* Which root detectors a camera runs. Deliberately the SAME vocabulary
-* post-analysis already tags every detection with (`DetectionSource`) rather
-* than a second spelling of the same two ideas — the value an operator picks
-* here is the value that comes back on the track, the overlay and the debug
-* row.
+* Which root detector a camera runs — EXACTLY ONE.
+*
+* Deliberately the SAME vocabulary post-analysis already tags every detection
+* with (`DetectionSource`) rather than a second spelling of the same two
+* ideas: the value an operator picks here is the value that comes back on the
+* track, the overlay and the debug row.
+*
+* ## Why one, and why it is still an array
+*
+* Two roots on one camera is a capability nobody asked for and the operator has
+* since ruled out. It was never free: both planes feed the SAME per-device
+* stationary registry, both can promote the same parked object, and the two
+* detectors disagree about the same box by construction — which is the
+* disagreement D505 had to arbitrate. Removing the case removes the arbitration.
+*
+* The ARRAY shape survives because the stored settings and the attach payload
+* already speak it on every camera of every fleet, and a cap input that
+* suddenly refuses a stored value makes the camera un-attachable — a fail-closed
+* in the one direction that costs an operator their cameras. So the wire stays
+* tolerant and the TYPE is exact: a longer list is truncated to its first
+* element rather than refused, and `max(1)` is what every consumer can then
+* rely on.
+*
+* AT MOST one, not exactly one. The EMPTY list is a legal, deliberate pick —
+* a camera an operator left with no root detector — and `planDetectionSources`
+* has always said so: inventing a root for them is how a default acts without
+* anybody choosing it. Tightening this to `length(1)` broke that, and the
+* suite caught it.
+*
+* Measured before tightening (2026-09-15, this fleet, 6 h of attaches): 3327
+* `["pipeline"]` and 2 `["onboard"]`. Not one camera had two.
 */
-var DetectionSourcesSchema = array(DetectionSourceSchema);
+var DetectionSourcesSchema = preprocess((value) => Array.isArray(value) && value.length > 1 ? value.slice(0, 1) : value, array(DetectionSourceSchema).max(1));
 /**
 * Input shape for `pipeline-runner.reportMotion` cap method. Exported
 * so cap-side consumers (the orchestrator forward, the runner addon's

package/dist/addon.mjs

@@ -19514,13 +19514,26 @@ var TrackAudioLabelSchema = object({
 *  - `audio` — an audio event on the camera itself that was anomalous for
 *    THAT camera, loud, and heard while nothing visual was happening (D62).
 *
+*  - `onboard` — the CAMERA's own firmware, paired with a decoded frame in
+*    that frame's pixel space. A real root detector and a SPATIAL one: its
+*    boxes are the same kind of fact `pipeline`'s are, produced by a different
+*    detector.
+*
+* `onboard` was missing here while `DetectionSourceSchema` already had it, so
+* a persisted onboard track failed `safeParse` on read and came back with NO
+* source at all — which `isSpatialTrack` then admitted by accident, through the
+* `undefined` arm rather than by anybody's decision, and which `excludeSources`
+* could not name.
+*
 * The spatial subsystems (tracker association, occupancy count, re-id /
 * embedding, resurrection) MUST skip every synthetic source. Test for that
-* with `isSpatialTrack`, which allow-lists `pipeline` — a `!== 'sensor'`
-* check silently readmits every source added after it was written.
+* with `isSpatialTrack`, which allow-lists the spatial sources explicitly — a
+* `!== 'sensor'` check silently readmits every source added after it was
+* written.
 */
 var TrackSourceSchema = _enum([
 	"pipeline",
+	"onboard",
 	"sensor",
 	"audio"
 ]);
@@ -20108,6 +20121,7 @@ var MediaFileKindEnum = _enum([
 	"keyFrame",
 	"keyFrameSmall",
 	"thumbnailSmall",
+	"confirmationCrop",
 	"sceneFrame"
 ]);
 /**
@@ -21602,13 +21616,39 @@ var MotionSourceEnum = _enum([
 */
 var MotionSourcesSchema = array(MotionSourceEnum);
 /**
-* Which root detectors a camera runs. Deliberately the SAME vocabulary
-* post-analysis already tags every detection with (`DetectionSource`) rather
-* than a second spelling of the same two ideas — the value an operator picks
-* here is the value that comes back on the track, the overlay and the debug
-* row.
+* Which root detector a camera runs — EXACTLY ONE.
+*
+* Deliberately the SAME vocabulary post-analysis already tags every detection
+* with (`DetectionSource`) rather than a second spelling of the same two
+* ideas: the value an operator picks here is the value that comes back on the
+* track, the overlay and the debug row.
+*
+* ## Why one, and why it is still an array
+*
+* Two roots on one camera is a capability nobody asked for and the operator has
+* since ruled out. It was never free: both planes feed the SAME per-device
+* stationary registry, both can promote the same parked object, and the two
+* detectors disagree about the same box by construction — which is the
+* disagreement D505 had to arbitrate. Removing the case removes the arbitration.
+*
+* The ARRAY shape survives because the stored settings and the attach payload
+* already speak it on every camera of every fleet, and a cap input that
+* suddenly refuses a stored value makes the camera un-attachable — a fail-closed
+* in the one direction that costs an operator their cameras. So the wire stays
+* tolerant and the TYPE is exact: a longer list is truncated to its first
+* element rather than refused, and `max(1)` is what every consumer can then
+* rely on.
+*
+* AT MOST one, not exactly one. The EMPTY list is a legal, deliberate pick —
+* a camera an operator left with no root detector — and `planDetectionSources`
+* has always said so: inventing a root for them is how a default acts without
+* anybody choosing it. Tightening this to `length(1)` broke that, and the
+* suite caught it.
+*
+* Measured before tightening (2026-09-15, this fleet, 6 h of attaches): 3327
+* `["pipeline"]` and 2 `["onboard"]`. Not one camera had two.
 */
-var DetectionSourcesSchema = array(DetectionSourceSchema);
+var DetectionSourcesSchema = preprocess((value) => Array.isArray(value) && value.length > 1 ? value.slice(0, 1) : value, array(DetectionSourceSchema).max(1));
 /**
 * Input shape for `pipeline-runner.reportMotion` cap method. Exported
 * so cap-side consumers (the orchestrator forward, the runner addon's

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-provider-homematic",
-  "version": "1.2.104",
+  "version": "1.2.106",
   "description": "Homematic / HomematicIP (CCU3 / RaspberryMatic) device-provider addon for CamStack — wraps the nodehomematic library",
   "keywords": [
     "camstack",