@camstack/addon-provider-homeassistant 1.2.81 → 1.2.83

package/dist/addon.js

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_dist = require("./dist-HZncHwuU.js");
+const require_dist = require("./dist-D5pBNTWh.js");
 let node_crypto = require("node:crypto");
 let node_zlib = require("node:zlib");
 //#region src/ha-device-source.ts
@@ -1410,31 +1410,14 @@ var HaClimateDevice = class extends HaBaseChildDevice {
 		this.registerClimateCap();
 		this.runtimeState.setCapState("climate-control", COLD_START$15);
 	}
+	/** The louver vocabularies HA last advertised, for the swing setters. */
+	swingModes = [];
+	swingHorizontalModes = [];
 	handleStatePush(state) {
 		if (state.state === "unavailable" || state.state === "unknown") return;
-		const lastFetchedAt = Date.parse(state.last_updated) || Date.now();
-		const attrs = state.attributes;
-		const mode = sanitizeHvacMode(state.state);
-		const availableModes = readStringArray$4(attrs, "hvac_modes").map(sanitizeHvacMode).filter((m) => m !== null);
-		const fanMode = readStringAttr$6(attrs, "fan_mode") ?? "";
-		const availableFanModes = readStringArray$4(attrs, "fan_modes");
-		const preset = readStringAttr$6(attrs, "preset_mode") ?? "";
-		const availablePresets = readStringArray$4(attrs, "preset_modes");
-		this.runtimeState.setCapState("climate-control", {
-			mode: mode ?? "off",
-			availableModes,
-			fanMode,
-			availableFanModes,
-			preset,
-			availablePresets,
-			target: readNumberAttr$5(attrs, "temperature"),
-			targetHigh: readNumberAttr$5(attrs, "target_temp_high"),
-			targetLow: readNumberAttr$5(attrs, "target_temp_low"),
-			targetHumidity: readNumberAttr$5(attrs, "target_humidity"),
-			currentTemp: readNumberAttr$5(attrs, "current_temperature"),
-			currentHumidity: readNumberAttr$5(attrs, "current_humidity"),
-			lastFetchedAt
-		});
+		this.swingModes = readStringArray$4(state.attributes, "swing_modes");
+		this.swingHorizontalModes = readStringArray$4(state.attributes, "swing_horizontal_modes");
+		this.runtimeState.setCapState("climate-control", climateSliceFromState(state));
 	}
 	registerClimateCap() {
 		this.ctx.registerNativeCap(require_dist.climateControlCapability, {
@@ -1462,15 +1445,96 @@ var HaClimateDevice = class extends HaBaseChildDevice {
 			setTargetHumidity: async ({ targetHumidity }) => {
 				await this.callHaService("climate", "set_humidity", { humidity: targetHumidity });
 			},
-			setSwingVertical: async () => {
-				throw new Error("HaClimateDevice: vertical swing not supported");
+			setSwingVertical: async ({ on }) => {
+				const swingMode = pickSwingMode(this.swingModes, on, VERTICAL_ON_MODES);
+				if (swingMode === null) throw new Error("HaClimateDevice: vertical swing not supported");
+				await this.callHaService("climate", "set_swing_mode", { swing_mode: swingMode });
 			},
-			setSwingHorizontal: async () => {
-				throw new Error("HaClimateDevice: horizontal swing not supported");
+			setSwingHorizontal: async ({ on }) => {
+				if (this.swingHorizontalModes.length > 0) {
+					const mode = pickSwingMode(this.swingHorizontalModes, on, HORIZONTAL_ON_MODES);
+					if (mode === null) throw new Error("HaClimateDevice: horizontal swing not supported");
+					await this.callHaService("climate", "set_swing_horizontal_mode", { swing_horizontal_mode: mode });
+					return;
+				}
+				const swingMode = pickSwingMode(this.swingModes, on, HORIZONTAL_ON_MODES);
+				if (swingMode === null) throw new Error("HaClimateDevice: horizontal swing not supported");
+				await this.callHaService("climate", "set_swing_mode", { swing_mode: swingMode });
 			}
 		});
 	}
 };
+/**
+* The `climate-control` slice for one HA `climate.*` state. Pure, and the ONLY
+* place the slice is assembled: every key the cap schema declares is present —
+* `swingVertical` / `swingHorizontal` are `nullable`, not optional, and a slice
+* that omitted them was refused by `setCapState` on every push (828 dropped
+* pushes in a day on the live hub, every thermostat stuck at its cold start).
+*/
+function climateSliceFromState(state) {
+	const lastFetchedAt = Date.parse(state.last_updated) || Date.now();
+	const attrs = state.attributes;
+	const mode = sanitizeHvacMode(state.state);
+	const availableModes = readStringArray$4(attrs, "hvac_modes").map(sanitizeHvacMode).filter((m) => m !== null);
+	const fanMode = readStringAttr$6(attrs, "fan_mode") ?? "";
+	const availableFanModes = readStringArray$4(attrs, "fan_modes");
+	const preset = readStringAttr$6(attrs, "preset_mode") ?? "";
+	const availablePresets = readStringArray$4(attrs, "preset_modes");
+	return {
+		mode: mode ?? "off",
+		availableModes,
+		fanMode,
+		availableFanModes,
+		preset,
+		availablePresets,
+		target: readNumberAttr$5(attrs, "temperature"),
+		targetHigh: readNumberAttr$5(attrs, "target_temp_high"),
+		targetLow: readNumberAttr$5(attrs, "target_temp_low"),
+		targetHumidity: readNumberAttr$5(attrs, "target_humidity"),
+		currentTemp: readNumberAttr$5(attrs, "current_temperature"),
+		currentHumidity: readNumberAttr$5(attrs, "current_humidity"),
+		...readSwing(attrs),
+		lastFetchedAt
+	};
+}
+/** HA `swing_mode` values that mean the VERTICAL louver is moving. */
+var VERTICAL_ON_MODES = [
+	"vertical",
+	"both",
+	"on"
+];
+/** HA `swing_mode` / `swing_horizontal_mode` values that mean the HORIZONTAL louver is moving. */
+var HORIZONTAL_ON_MODES = [
+	"horizontal",
+	"both",
+	"on"
+];
+/**
+* HA models swing as one `swing_mode` picked from `swing_modes` (`off`,
+* `vertical`, `horizontal`, `both`, vendor strings), plus — on newer cores —
+* a separate `swing_horizontal_mode`. An axis the device never advertised is
+* `null`: no vocabulary, no control (D62).
+*/
+function readSwing(attrs) {
+	const swingModes = readStringArray$4(attrs, "swing_modes");
+	const horizontalModes = readStringArray$4(attrs, "swing_horizontal_modes");
+	const swingMode = (readStringAttr$6(attrs, "swing_mode") ?? "").toLowerCase();
+	const horizontalMode = (readStringAttr$6(attrs, "swing_horizontal_mode") ?? "").toLowerCase();
+	return {
+		swingVertical: swingModes.length === 0 ? null : VERTICAL_ON_MODES.includes(swingMode),
+		swingHorizontal: horizontalModes.length > 0 ? HORIZONTAL_ON_MODES.includes(horizontalMode) : swingModes.some((m) => HORIZONTAL_ON_MODES.includes(m.toLowerCase())) ? HORIZONTAL_ON_MODES.includes(swingMode) : null
+	};
+}
+/**
+* The HA mode that turns one axis on or off, chosen from what the device
+* advertised; `null` when the vocabulary has no such value.
+*/
+function pickSwingMode(advertised, enabled, onModes) {
+	const lower = advertised.map((m) => m.toLowerCase());
+	const wanted = enabled ? onModes : ["off"];
+	const index = lower.findIndex((m) => wanted.includes(m));
+	return index === -1 ? null : advertised[index] ?? null;
+}
 function sanitizeHvacMode(s) {
 	switch (s) {
 		case "off":

package/dist/addon.mjs

@@ -1,4 +1,4 @@
-import { $ as presenceCapability, A as controlCapability, At as EventCategory, B as humiditySensorCapability, C as buildAddonRouteProvider, Ct as number, D as colorCapability, Dt as union, E as climateControlCapability, Et as string, F as eventEmitterCapability, G as motionCapability, H as lawnMowerControlCapability, I as fanControlCapability, J as notifierCapability, K as normalizeUnit, L as floodCapability, M as deviceAdoptionCapability, O as connectivityCapability, Ot as unknown, P as enumSensorCapability, Q as prepareNotification, R as gasCapability, S as brokerCapability, St as literal, T as carbonMonoxideCapability, Tt as record, U as lockControlCapability, V as imageCapability, W as mediaPlayerCapability, Y as numericSensorCapability, Z as powerMeterCapability, _ as automationControlCapability, _t as createEvent, at as temperatureSensorCapability, b as binaryCapability, bt as array, ct as valveCapability, d as TargetSchema, dt as weatherCapability, et as pressureSensorCapability, f as accessoriesCapability, ft as errMsg, g as ambientLightSensorCapability, gt as DeviceType, h as alarmPanelCapability, ht as DeviceRole, it as tamperCapability, j as coverCapability, k as contactCapability, kt as url, lt as vibrationCapability, m as airQualitySensorCapability, mt as DeviceFeature, n as BaseDevice, nt as smokeCapability, ot as updateCapability, p as addonRoutesCapability, q as notificationOutputCapability, r as BaseDeviceProvider, rt as switchCapability, s as EnumSensorDateTimeFormatSchema, st as vacuumControlCapability, tt as scriptRunnerCapability, ut as waterHeaterCapability, v as batteryCapability, w as buttonCapability, wt as object, x as brightnessCapability, xt as discriminatedUnion, y as bestLocationMatch, yt as _enum, z as humidifierCapability } from "./dist-BpePMREY.mjs";
+import { $ as presenceCapability, A as controlCapability, At as EventCategory, B as humiditySensorCapability, C as buildAddonRouteProvider, Ct as number, D as colorCapability, Dt as union, E as climateControlCapability, Et as string, F as eventEmitterCapability, G as motionCapability, H as lawnMowerControlCapability, I as fanControlCapability, J as notifierCapability, K as normalizeUnit, L as floodCapability, M as deviceAdoptionCapability, O as connectivityCapability, Ot as unknown, P as enumSensorCapability, Q as prepareNotification, R as gasCapability, S as brokerCapability, St as literal, T as carbonMonoxideCapability, Tt as record, U as lockControlCapability, V as imageCapability, W as mediaPlayerCapability, Y as numericSensorCapability, Z as powerMeterCapability, _ as automationControlCapability, _t as createEvent, at as temperatureSensorCapability, b as binaryCapability, bt as array, ct as valveCapability, d as TargetSchema, dt as weatherCapability, et as pressureSensorCapability, f as accessoriesCapability, ft as errMsg, g as ambientLightSensorCapability, gt as DeviceType, h as alarmPanelCapability, ht as DeviceRole, it as tamperCapability, j as coverCapability, k as contactCapability, kt as url, lt as vibrationCapability, m as airQualitySensorCapability, mt as DeviceFeature, n as BaseDevice, nt as smokeCapability, ot as updateCapability, p as addonRoutesCapability, q as notificationOutputCapability, r as BaseDeviceProvider, rt as switchCapability, s as EnumSensorDateTimeFormatSchema, st as vacuumControlCapability, tt as scriptRunnerCapability, ut as waterHeaterCapability, v as batteryCapability, w as buttonCapability, wt as object, x as brightnessCapability, xt as discriminatedUnion, y as bestLocationMatch, yt as _enum, z as humidifierCapability } from "./dist-DPdEnWGf.mjs";
 import { randomUUID } from "node:crypto";
 import { brotliCompressSync, deflateSync, gzipSync } from "node:zlib";
 //#region src/ha-device-source.ts
@@ -1409,31 +1409,14 @@ var HaClimateDevice = class extends HaBaseChildDevice {
 		this.registerClimateCap();
 		this.runtimeState.setCapState("climate-control", COLD_START$15);
 	}
+	/** The louver vocabularies HA last advertised, for the swing setters. */
+	swingModes = [];
+	swingHorizontalModes = [];
 	handleStatePush(state) {
 		if (state.state === "unavailable" || state.state === "unknown") return;
-		const lastFetchedAt = Date.parse(state.last_updated) || Date.now();
-		const attrs = state.attributes;
-		const mode = sanitizeHvacMode(state.state);
-		const availableModes = readStringArray$4(attrs, "hvac_modes").map(sanitizeHvacMode).filter((m) => m !== null);
-		const fanMode = readStringAttr$6(attrs, "fan_mode") ?? "";
-		const availableFanModes = readStringArray$4(attrs, "fan_modes");
-		const preset = readStringAttr$6(attrs, "preset_mode") ?? "";
-		const availablePresets = readStringArray$4(attrs, "preset_modes");
-		this.runtimeState.setCapState("climate-control", {
-			mode: mode ?? "off",
-			availableModes,
-			fanMode,
-			availableFanModes,
-			preset,
-			availablePresets,
-			target: readNumberAttr$5(attrs, "temperature"),
-			targetHigh: readNumberAttr$5(attrs, "target_temp_high"),
-			targetLow: readNumberAttr$5(attrs, "target_temp_low"),
-			targetHumidity: readNumberAttr$5(attrs, "target_humidity"),
-			currentTemp: readNumberAttr$5(attrs, "current_temperature"),
-			currentHumidity: readNumberAttr$5(attrs, "current_humidity"),
-			lastFetchedAt
-		});
+		this.swingModes = readStringArray$4(state.attributes, "swing_modes");
+		this.swingHorizontalModes = readStringArray$4(state.attributes, "swing_horizontal_modes");
+		this.runtimeState.setCapState("climate-control", climateSliceFromState(state));
 	}
 	registerClimateCap() {
 		this.ctx.registerNativeCap(climateControlCapability, {
@@ -1461,15 +1444,96 @@ var HaClimateDevice = class extends HaBaseChildDevice {
 			setTargetHumidity: async ({ targetHumidity }) => {
 				await this.callHaService("climate", "set_humidity", { humidity: targetHumidity });
 			},
-			setSwingVertical: async () => {
-				throw new Error("HaClimateDevice: vertical swing not supported");
+			setSwingVertical: async ({ on }) => {
+				const swingMode = pickSwingMode(this.swingModes, on, VERTICAL_ON_MODES);
+				if (swingMode === null) throw new Error("HaClimateDevice: vertical swing not supported");
+				await this.callHaService("climate", "set_swing_mode", { swing_mode: swingMode });
 			},
-			setSwingHorizontal: async () => {
-				throw new Error("HaClimateDevice: horizontal swing not supported");
+			setSwingHorizontal: async ({ on }) => {
+				if (this.swingHorizontalModes.length > 0) {
+					const mode = pickSwingMode(this.swingHorizontalModes, on, HORIZONTAL_ON_MODES);
+					if (mode === null) throw new Error("HaClimateDevice: horizontal swing not supported");
+					await this.callHaService("climate", "set_swing_horizontal_mode", { swing_horizontal_mode: mode });
+					return;
+				}
+				const swingMode = pickSwingMode(this.swingModes, on, HORIZONTAL_ON_MODES);
+				if (swingMode === null) throw new Error("HaClimateDevice: horizontal swing not supported");
+				await this.callHaService("climate", "set_swing_mode", { swing_mode: swingMode });
 			}
 		});
 	}
 };
+/**
+* The `climate-control` slice for one HA `climate.*` state. Pure, and the ONLY
+* place the slice is assembled: every key the cap schema declares is present —
+* `swingVertical` / `swingHorizontal` are `nullable`, not optional, and a slice
+* that omitted them was refused by `setCapState` on every push (828 dropped
+* pushes in a day on the live hub, every thermostat stuck at its cold start).
+*/
+function climateSliceFromState(state) {
+	const lastFetchedAt = Date.parse(state.last_updated) || Date.now();
+	const attrs = state.attributes;
+	const mode = sanitizeHvacMode(state.state);
+	const availableModes = readStringArray$4(attrs, "hvac_modes").map(sanitizeHvacMode).filter((m) => m !== null);
+	const fanMode = readStringAttr$6(attrs, "fan_mode") ?? "";
+	const availableFanModes = readStringArray$4(attrs, "fan_modes");
+	const preset = readStringAttr$6(attrs, "preset_mode") ?? "";
+	const availablePresets = readStringArray$4(attrs, "preset_modes");
+	return {
+		mode: mode ?? "off",
+		availableModes,
+		fanMode,
+		availableFanModes,
+		preset,
+		availablePresets,
+		target: readNumberAttr$5(attrs, "temperature"),
+		targetHigh: readNumberAttr$5(attrs, "target_temp_high"),
+		targetLow: readNumberAttr$5(attrs, "target_temp_low"),
+		targetHumidity: readNumberAttr$5(attrs, "target_humidity"),
+		currentTemp: readNumberAttr$5(attrs, "current_temperature"),
+		currentHumidity: readNumberAttr$5(attrs, "current_humidity"),
+		...readSwing(attrs),
+		lastFetchedAt
+	};
+}
+/** HA `swing_mode` values that mean the VERTICAL louver is moving. */
+var VERTICAL_ON_MODES = [
+	"vertical",
+	"both",
+	"on"
+];
+/** HA `swing_mode` / `swing_horizontal_mode` values that mean the HORIZONTAL louver is moving. */
+var HORIZONTAL_ON_MODES = [
+	"horizontal",
+	"both",
+	"on"
+];
+/**
+* HA models swing as one `swing_mode` picked from `swing_modes` (`off`,
+* `vertical`, `horizontal`, `both`, vendor strings), plus — on newer cores —
+* a separate `swing_horizontal_mode`. An axis the device never advertised is
+* `null`: no vocabulary, no control (D62).
+*/
+function readSwing(attrs) {
+	const swingModes = readStringArray$4(attrs, "swing_modes");
+	const horizontalModes = readStringArray$4(attrs, "swing_horizontal_modes");
+	const swingMode = (readStringAttr$6(attrs, "swing_mode") ?? "").toLowerCase();
+	const horizontalMode = (readStringAttr$6(attrs, "swing_horizontal_mode") ?? "").toLowerCase();
+	return {
+		swingVertical: swingModes.length === 0 ? null : VERTICAL_ON_MODES.includes(swingMode),
+		swingHorizontal: horizontalModes.length > 0 ? HORIZONTAL_ON_MODES.includes(horizontalMode) : swingModes.some((m) => HORIZONTAL_ON_MODES.includes(m.toLowerCase())) ? HORIZONTAL_ON_MODES.includes(swingMode) : null
+	};
+}
+/**
+* The HA mode that turns one axis on or off, chosen from what the device
+* advertised; `null` when the vocabulary has no such value.
+*/
+function pickSwingMode(advertised, enabled, onModes) {
+	const lower = advertised.map((m) => m.toLowerCase());
+	const wanted = enabled ? onModes : ["off"];
+	const index = lower.findIndex((m) => wanted.includes(m));
+	return index === -1 ? null : advertised[index] ?? null;
+}
 function sanitizeHvacMode(s) {
 	switch (s) {
 		case "off":

package/dist/{dist-HZncHwuU.js → dist-D5pBNTWh.js}

@@ -7756,7 +7756,8 @@ var CameraSwitchAuthoritySchema = discriminatedUnion("kind", [
 var CameraSwitchUnavailableReasonSchema = _enum([
 	"no-provider",
 	"source-unreachable",
-	"not-configured"
+	"not-configured",
+	"device-disabled"
 ]);
 /**
 * One switch, resolved for one camera.
@@ -24036,12 +24037,20 @@ var BatteryStatusSchema = object({
 	* Charging source. `'dc'` covers wall/USB adapters; `'solar'` is
 	* Reolink-specific for the Solar Panel 2 accessory (will become
 	* common on other battery cams). `'none'` means running on battery
-	* alone.
+	* alone — a NEGATIVE the firmware actually reported.
+	*
+	* `'unknown'` is the absence of an answer: the provider has not read the
+	* power fields yet, or the firmware reported neither. Before it existed,
+	* two unreadable fields produced `'none'`, and a camera nobody had reached
+	* was drawn "on battery alone" — the same D315 defect `percentage` closed
+	* by going nullable. Consumers SKIP it (no charger state published, no
+	* glyph, no HomeKit ChargingState) rather than coerce it either way.
 	*/
 	charging: _enum([
 		"dc",
 		"solar",
-		"none"
+		"none",
+		"unknown"
 	]),
 	/**
 	* True when the camera firmware has gone into low-power mode. Battery
@@ -24131,7 +24140,7 @@ onStatusChanged: { data: object({
 		kind: "push",
 		empty: {
 			percentage: 0,
-			charging: "none",
+			charging: "unknown",
 			sleeping: false,
 			lastUpdated: 0
 		}
@@ -33556,13 +33565,30 @@ var BaseDeviceProvider = class extends BaseAddon {
 	async onRestoreDevices(savedDevices) {
 		const restored = /* @__PURE__ */ new Set();
 		const failures = [];
+		const liveStableIds = new Set((await this.ctx.kernel.devices.getAll()).map((device) => device.stableId));
 		const attemptRestore = async (saved) => {
 			if (restored.has(saved.id)) return;
+			if (liveStableIds.has(saved.stableId)) {
+				this.ctx.logger.debug("Restore row already live — not dialled again", { tags: {
+					deviceId: saved.id,
+					stableId: saved.stableId
+				} });
+				restored.add(saved.id);
+				return;
+			}
 			const Class = this.deviceClasses[saved.type];
 			if (!Class) throw new Error(`no device class registered for type "${saved.type}"`);
 			if (saved.parentDeviceId !== null && !restored.has(saved.parentDeviceId)) throw new Error(`parent device ${saved.parentDeviceId} not restored`);
 			await this.healSavedConfig(saved, savedDevices);
-			await this.ctx.kernel.devices.create(saved.stableId, Class, {}, saved.parentDeviceId);
+			try {
+				await this.ctx.kernel.devices.create(saved.stableId, Class, {}, saved.parentDeviceId);
+			} catch (err) {
+				if (!(await this.ctx.kernel.devices.getAll()).some((device) => device.stableId === saved.stableId)) throw err;
+				this.ctx.logger.debug("Restore row came to life during its own dial — kept", { tags: {
+					deviceId: saved.id,
+					stableId: saved.stableId
+				} });
+			}
 			restored.add(saved.id);
 		};
 		const topLevel = savedDevices.filter((saved) => saved.parentDeviceId === null);

package/dist/{dist-BpePMREY.mjs → dist-DPdEnWGf.mjs}

@@ -7756,7 +7756,8 @@ var CameraSwitchAuthoritySchema = discriminatedUnion("kind", [
 var CameraSwitchUnavailableReasonSchema = _enum([
 	"no-provider",
 	"source-unreachable",
-	"not-configured"
+	"not-configured",
+	"device-disabled"
 ]);
 /**
 * One switch, resolved for one camera.
@@ -24036,12 +24037,20 @@ var BatteryStatusSchema = object({
 	* Charging source. `'dc'` covers wall/USB adapters; `'solar'` is
 	* Reolink-specific for the Solar Panel 2 accessory (will become
 	* common on other battery cams). `'none'` means running on battery
-	* alone.
+	* alone — a NEGATIVE the firmware actually reported.
+	*
+	* `'unknown'` is the absence of an answer: the provider has not read the
+	* power fields yet, or the firmware reported neither. Before it existed,
+	* two unreadable fields produced `'none'`, and a camera nobody had reached
+	* was drawn "on battery alone" — the same D315 defect `percentage` closed
+	* by going nullable. Consumers SKIP it (no charger state published, no
+	* glyph, no HomeKit ChargingState) rather than coerce it either way.
 	*/
 	charging: _enum([
 		"dc",
 		"solar",
-		"none"
+		"none",
+		"unknown"
 	]),
 	/**
 	* True when the camera firmware has gone into low-power mode. Battery
@@ -24131,7 +24140,7 @@ onStatusChanged: { data: object({
 		kind: "push",
 		empty: {
 			percentage: 0,
-			charging: "none",
+			charging: "unknown",
 			sleeping: false,
 			lastUpdated: 0
 		}
@@ -33556,13 +33565,30 @@ var BaseDeviceProvider = class extends BaseAddon {
 	async onRestoreDevices(savedDevices) {
 		const restored = /* @__PURE__ */ new Set();
 		const failures = [];
+		const liveStableIds = new Set((await this.ctx.kernel.devices.getAll()).map((device) => device.stableId));
 		const attemptRestore = async (saved) => {
 			if (restored.has(saved.id)) return;
+			if (liveStableIds.has(saved.stableId)) {
+				this.ctx.logger.debug("Restore row already live — not dialled again", { tags: {
+					deviceId: saved.id,
+					stableId: saved.stableId
+				} });
+				restored.add(saved.id);
+				return;
+			}
 			const Class = this.deviceClasses[saved.type];
 			if (!Class) throw new Error(`no device class registered for type "${saved.type}"`);
 			if (saved.parentDeviceId !== null && !restored.has(saved.parentDeviceId)) throw new Error(`parent device ${saved.parentDeviceId} not restored`);
 			await this.healSavedConfig(saved, savedDevices);
-			await this.ctx.kernel.devices.create(saved.stableId, Class, {}, saved.parentDeviceId);
+			try {
+				await this.ctx.kernel.devices.create(saved.stableId, Class, {}, saved.parentDeviceId);
+			} catch (err) {
+				if (!(await this.ctx.kernel.devices.getAll()).some((device) => device.stableId === saved.stableId)) throw err;
+				this.ctx.logger.debug("Restore row came to life during its own dial — kept", { tags: {
+					deviceId: saved.id,
+					stableId: saved.stableId
+				} });
+			}
 			restored.add(saved.id);
 		};
 		const topLevel = savedDevices.filter((saved) => saved.parentDeviceId === null);

package/dist/ha-export/ha-export.addon.js

@@ -3,7 +3,7 @@ Object.defineProperties(exports, {
 	[Symbol.toStringTag]: { value: "Module" }
 });
 //#endregion
-const require_dist = require("../dist-HZncHwuU.js");
+const require_dist = require("../dist-D5pBNTWh.js");
 let node_crypto = require("node:crypto");
 //#region src/ha-export/topics.ts
 /**
@@ -4959,12 +4959,13 @@ function projectZoneOccupancy(deviceKey, input) {
 }
 function projectBatterySlice(deviceKey, slice) {
 	const values = [{
-		topic: stateTopic(deviceKey, "charger"),
-		value: bool(slice.charging !== "none")
-	}, {
 		topic: stateTopic(deviceKey, "sleeping"),
 		value: bool(slice.sleeping)
 	}];
+	if (slice.charging !== "unknown") values.push({
+		topic: stateTopic(deviceKey, "charger"),
+		value: bool(slice.charging !== "none")
+	});
 	/**
 	* `binary: true` means the device reports "low" or "not low" and the
 	* percentage is a stand-in. Publishing it would put a fabricated

package/dist/ha-export/ha-export.addon.mjs

@@ -1,4 +1,4 @@
-import { At as EventCategory, C as buildAddonRouteProvider, Et as string, N as deviceExportCapability, X as oauthIntegrationCapability, a as COCO_TO_MACRO, c as FanDirectionSchema, i as CAMERA_SWITCH_ORDER, l as HvacModeSchema, o as CameraSwitchIdSchema, p as addonRoutesCapability, pt as BaseAddon, t as AlarmArmModeSchema, u as MediaPlayerRepeatSchema, vt as nodePin } from "../dist-BpePMREY.mjs";
+import { At as EventCategory, C as buildAddonRouteProvider, Et as string, N as deviceExportCapability, X as oauthIntegrationCapability, a as COCO_TO_MACRO, c as FanDirectionSchema, i as CAMERA_SWITCH_ORDER, l as HvacModeSchema, o as CameraSwitchIdSchema, p as addonRoutesCapability, pt as BaseAddon, t as AlarmArmModeSchema, u as MediaPlayerRepeatSchema, vt as nodePin } from "../dist-DPdEnWGf.mjs";
 import { createHmac, timingSafeEqual } from "node:crypto";
 //#region src/ha-export/topics.ts
 /**
@@ -4954,12 +4954,13 @@ function projectZoneOccupancy(deviceKey, input) {
 }
 function projectBatterySlice(deviceKey, slice) {
 	const values = [{
-		topic: stateTopic(deviceKey, "charger"),
-		value: bool(slice.charging !== "none")
-	}, {
 		topic: stateTopic(deviceKey, "sleeping"),
 		value: bool(slice.sleeping)
 	}];
+	if (slice.charging !== "unknown") values.push({
+		topic: stateTopic(deviceKey, "charger"),
+		value: bool(slice.charging !== "none")
+	});
 	/**
 	* `binary: true` means the device reports "low" or "not low" and the
 	* percentage is a stand-in. Publishing it would put a fabricated

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-provider-homeassistant",
-  "version": "1.2.81",
+  "version": "1.2.83",
   "description": "Home Assistant device provider addon for CamStack",
   "keywords": [
     "camstack",