@camstack/addon-provider-homeassistant 1.2.130 → 1.2.132

package/dist/addon.js

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_dist = require("./dist-ynceaZDr.js");
+const require_dist = require("./dist-BsxXcblv.js");
 let node_crypto = require("node:crypto");
 let node_zlib = require("node:zlib");
 //#region src/ha-device-source.ts

package/dist/addon.mjs

@@ -1,4 +1,4 @@
-import { $ as presenceCapability, A as controlCapability, At as EventCategory, B as humiditySensorCapability, C as buildAddonRouteProvider, Ct as number, D as colorCapability, Dt as union, E as climateControlCapability, Et as string, F as eventEmitterCapability, G as motionCapability, H as lawnMowerControlCapability, I as fanControlCapability, J as notifierCapability, K as normalizeUnit, L as floodCapability, M as deviceAdoptionCapability, O as connectivityCapability, Ot as unknown, P as enumSensorCapability, Q as prepareNotification, R as gasCapability, S as brokerCapability, St as literal, T as carbonMonoxideCapability, Tt as record, U as lockControlCapability, V as imageCapability, W as mediaPlayerCapability, Y as numericSensorCapability, Z as powerMeterCapability, _ as automationControlCapability, _t as createEvent, at as temperatureSensorCapability, b as binaryCapability, bt as array, ct as valveCapability, d as TargetSchema, dt as weatherCapability, et as pressureSensorCapability, f as accessoriesCapability, ft as errMsg, g as ambientLightSensorCapability, gt as DeviceType, h as alarmPanelCapability, ht as DeviceRole, it as tamperCapability, j as coverCapability, k as contactCapability, kt as url, lt as vibrationCapability, m as airQualitySensorCapability, mt as DeviceFeature, n as BaseDevice, nt as smokeCapability, ot as updateCapability, p as addonRoutesCapability, q as notificationOutputCapability, r as BaseDeviceProvider, rt as switchCapability, s as EnumSensorDateTimeFormatSchema, st as vacuumControlCapability, tt as scriptRunnerCapability, ut as waterHeaterCapability, v as batteryCapability, w as buttonCapability, wt as object, x as brightnessCapability, xt as discriminatedUnion, y as bestLocationMatch, yt as _enum, z as humidifierCapability } from "./dist-D_LRpYil.mjs";
+import { $ as presenceCapability, A as controlCapability, At as EventCategory, B as humiditySensorCapability, C as buildAddonRouteProvider, Ct as number, D as colorCapability, Dt as union, E as climateControlCapability, Et as string, F as eventEmitterCapability, G as motionCapability, H as lawnMowerControlCapability, I as fanControlCapability, J as notifierCapability, K as normalizeUnit, L as floodCapability, M as deviceAdoptionCapability, O as connectivityCapability, Ot as unknown, P as enumSensorCapability, Q as prepareNotification, R as gasCapability, S as brokerCapability, St as literal, T as carbonMonoxideCapability, Tt as record, U as lockControlCapability, V as imageCapability, W as mediaPlayerCapability, Y as numericSensorCapability, Z as powerMeterCapability, _ as automationControlCapability, _t as createEvent, at as temperatureSensorCapability, b as binaryCapability, bt as array, ct as valveCapability, d as TargetSchema, dt as weatherCapability, et as pressureSensorCapability, f as accessoriesCapability, ft as errMsg, g as ambientLightSensorCapability, gt as DeviceType, h as alarmPanelCapability, ht as DeviceRole, it as tamperCapability, j as coverCapability, k as contactCapability, kt as url, lt as vibrationCapability, m as airQualitySensorCapability, mt as DeviceFeature, n as BaseDevice, nt as smokeCapability, ot as updateCapability, p as addonRoutesCapability, q as notificationOutputCapability, r as BaseDeviceProvider, rt as switchCapability, s as EnumSensorDateTimeFormatSchema, st as vacuumControlCapability, tt as scriptRunnerCapability, ut as waterHeaterCapability, v as batteryCapability, w as buttonCapability, wt as object, x as brightnessCapability, xt as discriminatedUnion, y as bestLocationMatch, yt as _enum, z as humidifierCapability } from "./dist-BEWasBMp.mjs";
 import { randomUUID } from "node:crypto";
 import { brotliCompressSync, deflateSync, gzipSync } from "node:zlib";
 //#region src/ha-device-source.ts

package/dist/{dist-D_LRpYil.mjs → dist-BEWasBMp.mjs}

@@ -12561,7 +12561,23 @@ var PickStreamRequirementsSchema = object({
 	* This is what lets one picker serve both the bypass and the full source
 	* choice, instead of a consumer scoring privately when the bypass misses.
 	*/
-	allowTranscode: boolean().optional()
+	allowTranscode: boolean().optional(),
+	/**
+	* Consider ONLY streams the broker has bound to a profile slot.
+	*
+	* A consumer that dials the broker — which is every exporter, since none
+	* of them may open the camera's own URL — can do nothing with a source
+	* that has no slot: there is no restream to dial. Without this the picker
+	* can name such a stream, and each consumer discovers the dead end for
+	* itself: Alexa's `profileForCamStream` returns `null` and it quietly
+	* falls back, and HomeKit would have had to grow the same function again.
+	*
+	* Default `false`, and deliberately so: the BROKER itself picks through
+	* here when it decides which source to BIND to a slot
+	* (`computeInitialAssignment`), and it must see the unbound ones or it
+	* could never bind them.
+	*/
+	requireProfileBound: boolean().optional()
 }).readonly();
 var PickStreamPreferencesSchema = object({
 	/**
@@ -12602,7 +12618,43 @@ var PickedCamStreamSchema = object({
 	*/
 	transcodes: boolean(),
 	/** One-line explanation of why this stream won — for logs / debug UI. */
-	reason: string()
+	reason: string(),
+	/**
+	* The broker profile slot this source is bound to, when it is bound.
+	*
+	* Answered HERE because every consumer needs it and none of them can get it
+	* from the `camStreamId` alone. Alexa wrote `profileForCamStream` for it —
+	* a second cap read plus a `null` branch — and HomeKit was about to write
+	* the same function a second time.
+	*
+	* Absent when the source has no slot, which a caller passing
+	* `requireProfileBound` can never see.
+	*/
+	profile: CamProfileSchema.optional(),
+	/** The broker id of that slot, for logs that must name what was dialled. */
+	brokerId: string().optional(),
+	/**
+	* The broker restream URL to dial for this stream.
+	*
+	* An exporter must never open the camera's own URL — the broker is the one
+	* that dials the camera, and every consumer goes through its restream. So
+	* the picker answers with the thing a consumer may actually use, instead of
+	* naming a source and leaving each caller to look the URL up.
+	*/
+	url: string().optional(),
+	/**
+	* Frames per second this stream really delivers, and where the number came
+	* from.
+	*
+	* It is here because getting it wrong is expensive and silent: a HomeKit
+	* accessory advertised 720p at 24 fps while the slot serving it ran at 9,
+	* and the controller rendered nothing at all. The source is carried with the
+	* value for the same reason the bitrate evidence is: `published` is what the
+	* publisher declares and `measured` is what the broker observed, and they
+	* are not interchangeable.
+	*/
+	fps: number().positive().optional(),
+	fpsSource: _enum(["published", "measured"]).optional()
 });
 /**
 * Camera streams — device-scoped facade over the system `stream-broker`.

package/dist/{dist-ynceaZDr.js → dist-BsxXcblv.js}

@@ -12561,7 +12561,23 @@ var PickStreamRequirementsSchema = object({
 	* This is what lets one picker serve both the bypass and the full source
 	* choice, instead of a consumer scoring privately when the bypass misses.
 	*/
-	allowTranscode: boolean().optional()
+	allowTranscode: boolean().optional(),
+	/**
+	* Consider ONLY streams the broker has bound to a profile slot.
+	*
+	* A consumer that dials the broker — which is every exporter, since none
+	* of them may open the camera's own URL — can do nothing with a source
+	* that has no slot: there is no restream to dial. Without this the picker
+	* can name such a stream, and each consumer discovers the dead end for
+	* itself: Alexa's `profileForCamStream` returns `null` and it quietly
+	* falls back, and HomeKit would have had to grow the same function again.
+	*
+	* Default `false`, and deliberately so: the BROKER itself picks through
+	* here when it decides which source to BIND to a slot
+	* (`computeInitialAssignment`), and it must see the unbound ones or it
+	* could never bind them.
+	*/
+	requireProfileBound: boolean().optional()
 }).readonly();
 var PickStreamPreferencesSchema = object({
 	/**
@@ -12602,7 +12618,43 @@ var PickedCamStreamSchema = object({
 	*/
 	transcodes: boolean(),
 	/** One-line explanation of why this stream won — for logs / debug UI. */
-	reason: string()
+	reason: string(),
+	/**
+	* The broker profile slot this source is bound to, when it is bound.
+	*
+	* Answered HERE because every consumer needs it and none of them can get it
+	* from the `camStreamId` alone. Alexa wrote `profileForCamStream` for it —
+	* a second cap read plus a `null` branch — and HomeKit was about to write
+	* the same function a second time.
+	*
+	* Absent when the source has no slot, which a caller passing
+	* `requireProfileBound` can never see.
+	*/
+	profile: CamProfileSchema.optional(),
+	/** The broker id of that slot, for logs that must name what was dialled. */
+	brokerId: string().optional(),
+	/**
+	* The broker restream URL to dial for this stream.
+	*
+	* An exporter must never open the camera's own URL — the broker is the one
+	* that dials the camera, and every consumer goes through its restream. So
+	* the picker answers with the thing a consumer may actually use, instead of
+	* naming a source and leaving each caller to look the URL up.
+	*/
+	url: string().optional(),
+	/**
+	* Frames per second this stream really delivers, and where the number came
+	* from.
+	*
+	* It is here because getting it wrong is expensive and silent: a HomeKit
+	* accessory advertised 720p at 24 fps while the slot serving it ran at 9,
+	* and the controller rendered nothing at all. The source is carried with the
+	* value for the same reason the bitrate evidence is: `published` is what the
+	* publisher declares and `measured` is what the broker observed, and they
+	* are not interchangeable.
+	*/
+	fps: number().positive().optional(),
+	fpsSource: _enum(["published", "measured"]).optional()
 });
 /**
 * Camera streams — device-scoped facade over the system `stream-broker`.

package/dist/ha-export/ha-export.addon.js

@@ -3,7 +3,7 @@ Object.defineProperties(exports, {
 	[Symbol.toStringTag]: { value: "Module" }
 });
 //#endregion
-const require_dist = require("../dist-ynceaZDr.js");
+const require_dist = require("../dist-BsxXcblv.js");
 let node_crypto = require("node:crypto");
 //#region src/ha-export/topics.ts
 /**

package/dist/ha-export/ha-export.addon.mjs

@@ -1,4 +1,4 @@
-import { At as EventCategory, C as buildAddonRouteProvider, Et as string, N as deviceExportCapability, X as oauthIntegrationCapability, a as COCO_TO_MACRO, c as FanDirectionSchema, i as CAMERA_SWITCH_ORDER, l as HvacModeSchema, o as CameraSwitchIdSchema, p as addonRoutesCapability, pt as BaseAddon, t as AlarmArmModeSchema, u as MediaPlayerRepeatSchema, vt as nodePin } from "../dist-D_LRpYil.mjs";
+import { At as EventCategory, C as buildAddonRouteProvider, Et as string, N as deviceExportCapability, X as oauthIntegrationCapability, a as COCO_TO_MACRO, c as FanDirectionSchema, i as CAMERA_SWITCH_ORDER, l as HvacModeSchema, o as CameraSwitchIdSchema, p as addonRoutesCapability, pt as BaseAddon, t as AlarmArmModeSchema, u as MediaPlayerRepeatSchema, vt as nodePin } from "../dist-BEWasBMp.mjs";
 import { createHmac, timingSafeEqual } from "node:crypto";
 //#region src/ha-export/topics.ts
 /**

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-provider-homeassistant",
-  "version": "1.2.130",
+  "version": "1.2.132",
   "description": "Home Assistant device provider addon for CamStack",
   "keywords": [
     "camstack",