@camstack/addon-provider-dreo 0.2.57 → 0.2.59

package/dist/addon.js

@@ -10563,6 +10563,89 @@ var LocationStatSchema = object({
 	fileCount: number(),
 	present: boolean()
 });
+/** Lifecycle of a backup run. Terminal states: succeeded / failed / cancelled. */
+var BackupRunStateSchema = _enum([
+	"queued",
+	"running",
+	"succeeded",
+	"failed",
+	"cancelled"
+]);
+/**
+* Where a running backup currently is. `queued` before it starts,
+* `building` while the tar.gz is being staged, `uploading` during the
+* per-destination fan-out, `done` once terminal.
+*/
+var BackupRunPhaseSchema = _enum([
+	"queued",
+	"building",
+	"uploading",
+	"done"
+]);
+/**
+* Observable state of one backup run — readable WHILE it runs via
+* `backup.listRuns`. This is what makes the execution queue and
+* `backup.cancel` usable: the 2026-09-04 incident (two concurrent
+* multi-GB builds, staging 5.1 GB → 18 GB, load 62) was only
+* diagnosable with `du` because nothing reported that runs existed or
+* how large the staged archive had grown.
+*/
+var BackupRunSchema = object({
+	/** Stable run id — the handle `backup.cancel` takes. */
+	id: string(),
+	state: BackupRunStateSchema,
+	phase: BackupRunPhaseSchema,
+	/**
+	* Resolved destination location ids. Empty while queued (targets are
+	* resolved when the run starts, against the then-current policies).
+	*/
+	destinationIds: array(string()).readonly(),
+	label: string().optional(),
+	/** ms-epoch when the run was submitted (trigger call / schedule fire). */
+	requestedAt: number(),
+	/** ms-epoch when the run left the queue and started building. */
+	startedAt: number().optional(),
+	/** ms-epoch when the run reached a terminal state. */
+	finishedAt: number().optional(),
+	/** Compressed bytes of the staging archive written so far. */
+	stagedBytes: number(),
+	/** Final staged archive size, once the build phase completes. */
+	archiveSizeBytes: number().optional(),
+	/** Bytes pushed to the destination currently uploading. */
+	uploadedBytes: number(),
+	/** Destinations where the archive fully landed (uploaded + indexed). */
+	completedDestinationIds: array(string()).readonly(),
+	/** Destinations that failed during the fan-out. */
+	failedDestinationIds: array(string()).readonly(),
+	/** Failure message when `state === 'failed'`. */
+	error: string().optional(),
+	/**
+	* 1-based place in the execution queue — 1 = runs next. Present only
+	* while `state === 'queued'`. Stamped by the orchestrator from the
+	* queue's OWN pending order, never derived from timestamps, so the
+	* UI cannot show an order the executor will not honour.
+	*/
+	queuePosition: number().int().min(1).optional()
+});
+/**
+* Result of `backup.trigger`. The call still resolves when the run
+* terminates (compat with schedule-driven runs and the admin UI), but
+* it now names the run and says whether it had to WAIT: a trigger that
+* arrives while another run is in flight is enqueued (or joined onto
+* an identical already-queued run), never started concurrently.
+*/
+var BackupTriggerResultSchema = object({
+	/** The run this trigger mapped to — poll it via `listRuns`, stop it via `cancel`. */
+	runId: string(),
+	/** True when the run waited behind an in-flight run instead of starting immediately. */
+	queued: boolean(),
+	/** True when this trigger was coalesced onto an identical already-queued run. */
+	joined: boolean(),
+	/** True when the run was cancelled before completing every destination. */
+	cancelled: boolean(),
+	/** One entry per destination the archive landed at (partial on cancel). */
+	entries: array(BackupEntrySchema).readonly()
+});
 /**
 * A backup schedule — the N:M "entry" that binds one cron cadence to a
 * SET of destination locations. Supersedes the per-location cron on
@@ -10610,7 +10693,10 @@ method(_void(), array(BackupDestinationInfoSchema).readonly(), { auth: "admin" }
 	* retention (manual runs).
 	*/
 	retentionCount: number().int().min(1).max(1e3).optional()
-}).optional(), array(BackupEntrySchema).readonly(), {
+}).optional(), BackupTriggerResultSchema, {
+	kind: "mutation",
+	auth: "admin"
+}), method(_void(), array(BackupRunSchema).readonly(), { auth: "admin" }), method(object({ runId: string() }), object({ cancelled: boolean() }), {
 	kind: "mutation",
 	auth: "admin"
 }), method(_void(), array(BackupEntrySchema).readonly(), { auth: "admin" }), method(_void(), array(LocationStatSchema).readonly(), { auth: "admin" }), method(object({
@@ -11327,6 +11413,14 @@ method(object({
 }), object({ success: literal(true) }), {
 	kind: "mutation",
 	auth: "admin"
+}), method(object({ deviceId: number().int().nonnegative() }), object({
+	derivedStreamsDeleted: array(string()).readonly(),
+	assignmentsPurged: boolean(),
+	probeSnapshotsDropped: number().int().nonnegative(),
+	rtspTokenRowsDeleted: number().int().nonnegative()
+}), {
+	kind: "mutation",
+	auth: "admin"
 }), method(object({
 	deviceId: number(),
 	/** Absent = the LOWEST assigned profile — a notification attachment is
@@ -19236,7 +19330,20 @@ var RecentTracksQueryInput = object({
 	projection: TrackProjectionSchema.optional(),
 	/** Include stationary-promoted rows (parked objects). Default false: the
 	*  feed lists passages; parking records live on the stationary registry. */
-	includeStationary: boolean().optional()
+	includeStationary: boolean().optional(),
+	/**
+	* Restrict to these track classes. ABSENT or EMPTY means no filter.
+	*
+	* The same filter `listTracks` takes, because the timeline's class chips must
+	* mean the same thing whether the scope is one camera or twelve. Until this
+	* existed the scoped feed downloaded a page and narrowed it on the phone
+	* while the single-camera path narrowed the read — one filter, two costs.
+	*
+	* A SUPERSET prefilter on `classes[]`, like its single-camera twin: rows
+	* whose class list is unreadable are kept, and the client's rule stays the
+	* exact one.
+	*/
+	classes: array(string()).optional()
 });
 var RecentTracksPageSchema = object({
 	/** Merged page, ordered by (`lastSeen` DESC, `trackId` DESC). */
@@ -23406,8 +23513,22 @@ var automationControlCapability = {
 * threshold.
 */
 var BatteryStatusSchema = object({
-	/** 0..100 inclusive. Firmware-reported. */
-	percentage: number().min(0).max(100),
+	/**
+	* 0..100 inclusive, firmware-reported. **`null` means NOT YET KNOWN** — the
+	* provider has registered the capability but no reading has landed.
+	*
+	* It is nullable because it was not, and the only value a provider could
+	* seed with was `0`. A battery camera behind an NVR therefore announced
+	* itself at 0% on every start and corrected itself a moment later, which is
+	* indistinguishable from a real flat battery: it fires the low-battery alert
+	* every time the hub restarts. Unknown is not empty (D315), and on a battery
+	* reading the difference is an alarm.
+	*
+	* `vacuum-control` and `lawn-mower-control` already model it this way.
+	* Consumers must SKIP a null rather than coerce it — `battery-band` already
+	* declines to band a non-finite reading, which is the correct shape.
+	*/
+	percentage: number().min(0).max(100).nullable(),
 	/**
 	* Charging source. `'dc'` covers wall/USB adapters; `'solar'` is
 	* Reolink-specific for the Solar Panel 2 accessory (will become
@@ -33176,6 +33297,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"backup.cancel": {
+		capName: "backup",
+		capScope: "system",
+		addonId: null,
+		access: "create"
+	},
 	"backup.delete": {
 		capName: "backup",
 		capScope: "system",
@@ -33218,6 +33345,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"backup.listRuns": {
+		capName: "backup",
+		capScope: "system",
+		addonId: null,
+		access: "view"
+	},
 	"backup.listSchedules": {
 		capName: "backup",
 		capScope: "system",
@@ -37784,6 +37917,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"streamBroker.forgetDeviceHardware": {
+		capName: "stream-broker",
+		capScope: "system",
+		addonId: null,
+		access: "delete"
+	},
 	"streamBroker.getAllRtspEntries": {
 		capName: "stream-broker",
 		capScope: "system",
@@ -40242,6 +40381,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"streamBroker.forgetDeviceHardware": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"streamBroker.getDeviceAudioMute": [{
 		name: "deviceId",
 		form: "single",

package/dist/addon.mjs

@@ -10564,6 +10564,89 @@ var LocationStatSchema = object({
 	fileCount: number(),
 	present: boolean()
 });
+/** Lifecycle of a backup run. Terminal states: succeeded / failed / cancelled. */
+var BackupRunStateSchema = _enum([
+	"queued",
+	"running",
+	"succeeded",
+	"failed",
+	"cancelled"
+]);
+/**
+* Where a running backup currently is. `queued` before it starts,
+* `building` while the tar.gz is being staged, `uploading` during the
+* per-destination fan-out, `done` once terminal.
+*/
+var BackupRunPhaseSchema = _enum([
+	"queued",
+	"building",
+	"uploading",
+	"done"
+]);
+/**
+* Observable state of one backup run — readable WHILE it runs via
+* `backup.listRuns`. This is what makes the execution queue and
+* `backup.cancel` usable: the 2026-09-04 incident (two concurrent
+* multi-GB builds, staging 5.1 GB → 18 GB, load 62) was only
+* diagnosable with `du` because nothing reported that runs existed or
+* how large the staged archive had grown.
+*/
+var BackupRunSchema = object({
+	/** Stable run id — the handle `backup.cancel` takes. */
+	id: string(),
+	state: BackupRunStateSchema,
+	phase: BackupRunPhaseSchema,
+	/**
+	* Resolved destination location ids. Empty while queued (targets are
+	* resolved when the run starts, against the then-current policies).
+	*/
+	destinationIds: array(string()).readonly(),
+	label: string().optional(),
+	/** ms-epoch when the run was submitted (trigger call / schedule fire). */
+	requestedAt: number(),
+	/** ms-epoch when the run left the queue and started building. */
+	startedAt: number().optional(),
+	/** ms-epoch when the run reached a terminal state. */
+	finishedAt: number().optional(),
+	/** Compressed bytes of the staging archive written so far. */
+	stagedBytes: number(),
+	/** Final staged archive size, once the build phase completes. */
+	archiveSizeBytes: number().optional(),
+	/** Bytes pushed to the destination currently uploading. */
+	uploadedBytes: number(),
+	/** Destinations where the archive fully landed (uploaded + indexed). */
+	completedDestinationIds: array(string()).readonly(),
+	/** Destinations that failed during the fan-out. */
+	failedDestinationIds: array(string()).readonly(),
+	/** Failure message when `state === 'failed'`. */
+	error: string().optional(),
+	/**
+	* 1-based place in the execution queue — 1 = runs next. Present only
+	* while `state === 'queued'`. Stamped by the orchestrator from the
+	* queue's OWN pending order, never derived from timestamps, so the
+	* UI cannot show an order the executor will not honour.
+	*/
+	queuePosition: number().int().min(1).optional()
+});
+/**
+* Result of `backup.trigger`. The call still resolves when the run
+* terminates (compat with schedule-driven runs and the admin UI), but
+* it now names the run and says whether it had to WAIT: a trigger that
+* arrives while another run is in flight is enqueued (or joined onto
+* an identical already-queued run), never started concurrently.
+*/
+var BackupTriggerResultSchema = object({
+	/** The run this trigger mapped to — poll it via `listRuns`, stop it via `cancel`. */
+	runId: string(),
+	/** True when the run waited behind an in-flight run instead of starting immediately. */
+	queued: boolean(),
+	/** True when this trigger was coalesced onto an identical already-queued run. */
+	joined: boolean(),
+	/** True when the run was cancelled before completing every destination. */
+	cancelled: boolean(),
+	/** One entry per destination the archive landed at (partial on cancel). */
+	entries: array(BackupEntrySchema).readonly()
+});
 /**
 * A backup schedule — the N:M "entry" that binds one cron cadence to a
 * SET of destination locations. Supersedes the per-location cron on
@@ -10611,7 +10694,10 @@ method(_void(), array(BackupDestinationInfoSchema).readonly(), { auth: "admin" }
 	* retention (manual runs).
 	*/
 	retentionCount: number().int().min(1).max(1e3).optional()
-}).optional(), array(BackupEntrySchema).readonly(), {
+}).optional(), BackupTriggerResultSchema, {
+	kind: "mutation",
+	auth: "admin"
+}), method(_void(), array(BackupRunSchema).readonly(), { auth: "admin" }), method(object({ runId: string() }), object({ cancelled: boolean() }), {
 	kind: "mutation",
 	auth: "admin"
 }), method(_void(), array(BackupEntrySchema).readonly(), { auth: "admin" }), method(_void(), array(LocationStatSchema).readonly(), { auth: "admin" }), method(object({
@@ -11328,6 +11414,14 @@ method(object({
 }), object({ success: literal(true) }), {
 	kind: "mutation",
 	auth: "admin"
+}), method(object({ deviceId: number().int().nonnegative() }), object({
+	derivedStreamsDeleted: array(string()).readonly(),
+	assignmentsPurged: boolean(),
+	probeSnapshotsDropped: number().int().nonnegative(),
+	rtspTokenRowsDeleted: number().int().nonnegative()
+}), {
+	kind: "mutation",
+	auth: "admin"
 }), method(object({
 	deviceId: number(),
 	/** Absent = the LOWEST assigned profile — a notification attachment is
@@ -19237,7 +19331,20 @@ var RecentTracksQueryInput = object({
 	projection: TrackProjectionSchema.optional(),
 	/** Include stationary-promoted rows (parked objects). Default false: the
 	*  feed lists passages; parking records live on the stationary registry. */
-	includeStationary: boolean().optional()
+	includeStationary: boolean().optional(),
+	/**
+	* Restrict to these track classes. ABSENT or EMPTY means no filter.
+	*
+	* The same filter `listTracks` takes, because the timeline's class chips must
+	* mean the same thing whether the scope is one camera or twelve. Until this
+	* existed the scoped feed downloaded a page and narrowed it on the phone
+	* while the single-camera path narrowed the read — one filter, two costs.
+	*
+	* A SUPERSET prefilter on `classes[]`, like its single-camera twin: rows
+	* whose class list is unreadable are kept, and the client's rule stays the
+	* exact one.
+	*/
+	classes: array(string()).optional()
 });
 var RecentTracksPageSchema = object({
 	/** Merged page, ordered by (`lastSeen` DESC, `trackId` DESC). */
@@ -23407,8 +23514,22 @@ var automationControlCapability = {
 * threshold.
 */
 var BatteryStatusSchema = object({
-	/** 0..100 inclusive. Firmware-reported. */
-	percentage: number().min(0).max(100),
+	/**
+	* 0..100 inclusive, firmware-reported. **`null` means NOT YET KNOWN** — the
+	* provider has registered the capability but no reading has landed.
+	*
+	* It is nullable because it was not, and the only value a provider could
+	* seed with was `0`. A battery camera behind an NVR therefore announced
+	* itself at 0% on every start and corrected itself a moment later, which is
+	* indistinguishable from a real flat battery: it fires the low-battery alert
+	* every time the hub restarts. Unknown is not empty (D315), and on a battery
+	* reading the difference is an alarm.
+	*
+	* `vacuum-control` and `lawn-mower-control` already model it this way.
+	* Consumers must SKIP a null rather than coerce it — `battery-band` already
+	* declines to band a non-finite reading, which is the correct shape.
+	*/
+	percentage: number().min(0).max(100).nullable(),
 	/**
 	* Charging source. `'dc'` covers wall/USB adapters; `'solar'` is
 	* Reolink-specific for the Solar Panel 2 accessory (will become
@@ -33177,6 +33298,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"backup.cancel": {
+		capName: "backup",
+		capScope: "system",
+		addonId: null,
+		access: "create"
+	},
 	"backup.delete": {
 		capName: "backup",
 		capScope: "system",
@@ -33219,6 +33346,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"backup.listRuns": {
+		capName: "backup",
+		capScope: "system",
+		addonId: null,
+		access: "view"
+	},
 	"backup.listSchedules": {
 		capName: "backup",
 		capScope: "system",
@@ -37785,6 +37918,12 @@ Object.freeze({
 		addonId: null,
 		access: "create"
 	},
+	"streamBroker.forgetDeviceHardware": {
+		capName: "stream-broker",
+		capScope: "system",
+		addonId: null,
+		access: "delete"
+	},
 	"streamBroker.getAllRtspEntries": {
 		capName: "stream-broker",
 		capScope: "system",
@@ -40243,6 +40382,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"streamBroker.forgetDeviceHardware": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"streamBroker.getDeviceAudioMute": [{
 		name: "deviceId",
 		form: "single",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-provider-dreo",
-  "version": "0.2.57",
+  "version": "0.2.59",
   "description": "Dreo smart-device (fan / air-circulator / purifier / heater / humidifier) device-provider addon for CamStack — wraps the @apocaliss92/nodedreo Dreo cloud client (REST + WebSocket)",
   "keywords": [
     "camstack",