@camstack/addon-post-analysis 1.2.77 → 1.2.79

package/dist/{dist-Bs6oboqZ.js → dist-CWoaZE47.js}

@@ -12759,6 +12759,18 @@ var LlmGenerateBaseInputSchema = object({
 * Resource ceiling = llama-server flags + idleStopMinutes ONLY (no RSS
 * watchdog — operator decision #3).
 */
+/**
+* A companion artifact that MUST land beside the main GGUF: the `mmproj`
+* projector of a vision model, or shards 2..N of a split GGUF. Carried on the
+* REF rather than looked up at install time, so what the operator approved in
+* the preview is exactly what the node downloads.
+*/
+var ManagedModelExtraFileSchema = object({
+	url: string(),
+	filename: string(),
+	sizeBytes: number(),
+	sha256: string().optional()
+});
 var ManagedModelRefSchema = discriminatedUnion("kind", [
 	object({
 		kind: literal("catalog"),
@@ -12767,7 +12779,11 @@ var ManagedModelRefSchema = discriminatedUnion("kind", [
 	object({
 		kind: literal("url"),
 		url: string(),
-		sha256: string().optional()
+		sha256: string().optional(),
+		/** Picker/status label; the file basename when absent. */
+		label: string().optional(),
+		sizeBytes: number().optional(),
+		extraFiles: array(ManagedModelExtraFileSchema).optional()
 	}),
 	object({
 		kind: literal("path"),
@@ -12828,11 +12844,39 @@ var ManagedRuntimeConfigSchema = object({
 		"q4_1",
 		"q4_0"
 	]).optional(),
+	/**
+	* Escape hatch for llama-server flags this schema does NOT model — `--jinja`
+	* (which most vision chat templates need and some language-only models
+	* dislike), `--cont-batching`, `--rope-scaling`, …
+	*
+	* It is NOT a second place to set the flags above. A token that collides
+	* with a typed field is REJECTED at start, naming the field that owns it
+	* (`assertNoOwnedFlags`), because two knobs writing the same argv is exactly
+	* the "two switches that disagree" failure this repo has already shipped
+	* twice (D62).
+	*/
+	extraArgs: array(string()).default([]),
 	/** Else lazy: first generate boots it. */
 	autoStart: boolean().default(false),
 	/** 0 = never; frees RAM after quiet periods. */
 	idleStopMinutes: number().int().default(30)
 });
+/**
+* Where a multi-GB install currently is. A single 0..1 fraction cannot answer
+* "is it stuck?" for an install that is three files (shards + mmproj) followed
+* by a sha256 pass over 22 GB — during which the fraction sat at 1.0 and the
+* node looked hung. Phase + file + bytes is the smallest shape that does.
+*/
+var LlmDownloadProgressSchema = object({
+	phase: _enum(["downloading", "verifying"]),
+	/** The artifact currently moving, e.g. `mmproj-F16.gguf`. */
+	file: string(),
+	fileIndex: number().int(),
+	fileCount: number().int(),
+	/** Across the WHOLE install, not the current file. */
+	downloadedBytes: number(),
+	totalBytes: number().optional()
+});
 var LlmRuntimeStatusSchema = object({
 	/** Status is ALWAYS node-qualified. */
 	nodeId: string(),
@@ -12849,6 +12893,8 @@ var LlmRuntimeStatusSchema = object({
 	modelPath: string().optional(),
 	modelId: string().optional(),
 	downloadProgress: number().min(0).max(1).optional(),
+	/** Detail behind `downloadProgress`; present for the same lifetime. */
+	download: LlmDownloadProgressSchema.optional(),
 	lastError: string().optional(),
 	crashesInWindow: number(),
 	/** Child RSS (sampled best-effort). */
@@ -12859,7 +12905,14 @@ var LlmNodeModelSchema = object({
 	file: string(),
 	sizeBytes: number(),
 	catalogId: string().optional(),
-	installedAt: number().optional()
+	installedAt: number().optional(),
+	/**
+	* Absolute path on the node. Present so a file that is on disk but matches
+	* no catalog entry — a custom Hugging Face install, or a GGUF the operator
+	* copied in by hand — is still SELECTABLE, as a `{kind:'path'}` ref. Without
+	* it the picker could list such a file and do nothing with it.
+	*/
+	path: string().optional()
 });
 var LlmRuntimeDiskUsageSchema = object({
 	nodeId: string(),
@@ -12937,9 +12990,12 @@ var LlmProfileSchema = object({
 	systemPrompt: string().optional(),
 	/** Total generation bound — the only one a unary call has. */
 	timeoutMs: number().int().positive().default(6e4),
-	/** Wait for response headers only. */
+	/** The TCP handshake only — "is the port even open". NOT the wait for
+	*  response headers: on the LM Studio / llama-server wire those are written
+	*  once the model has finished loading, so they belong to the bound below. */
 	connectTimeoutMs: number().int().positive().default(1e4),
-	/** Accepted, but no output yet — a cold GPU load lives here. */
+	/** Accepted, but no output yet — response headers included, because a cold
+	*  GPU load is exactly what happens before them. */
 	firstTokenTimeoutMs: number().int().positive().default(12e4),
 	/** Output started then stopped. */
 	idleTimeoutMs: number().int().positive().default(6e4),
@@ -13002,6 +13058,36 @@ var ManagedModelCatalogEntrySchema = object({
 	/** Vision models: companion projector file. */
 	mmprojUrl: string().optional()
 });
+/**
+* The outcome of turning one operator-typed Hugging Face reference into a
+* download plan. A RESULT, never a throw: "this repo has 24 quantizations and
+* I will not pick for you" is a normal answer the UI has to render, not an
+* exception.
+*
+* `candidates` is the whole reason the refusal is usable — every string in it
+* is a tag that resolves when pasted back as `<org>/<repo>:<TAG>`.
+*/
+var HfModelResolutionSchema = discriminatedUnion("ok", [object({
+	ok: literal(true),
+	/** Ready to hand to `installModel` unchanged. */
+	model: ManagedModelRefSchema,
+	label: string(),
+	repo: string(),
+	quantization: string(),
+	purpose: _enum(["text", "vision"]),
+	totalBytes: number(),
+	/** mmproj + shards, for the preview: an operator approving 23 GB should
+	*  see that 0.9 GB of it is a projector they did not name. */
+	extraFilenames: array(string())
+}), object({
+	ok: literal(false),
+	code: string(),
+	message: string(),
+	candidates: array(string()).optional(),
+	/** Set when the refusal was only the ceiling: re-calling with
+	*  `maxBytes: requiredBytes` is the operator's explicit override. */
+	requiredBytes: number().optional()
+})]);
 var LlmRuntimeNodeSchema = object({
 	nodeId: string(),
 	reachable: boolean(),
@@ -13038,6 +13124,15 @@ method(LlmGenerateBaseInputSchema, LlmGenerateResultSchema, { kind: "mutation" }
 	consumer: string().optional(),
 	profileId: string().optional()
 }), array(LlmUsageRollupSchema)), method(object({}), array(ManagedModelCatalogEntrySchema)), method(object({}), array(LlmRuntimeNodeSchema)), method(object({ nodeId: string() }), array(LlmNodeModelSchema)), method(object({
+	/** `https://huggingface.co/<org>/<repo>/resolve/main/<f>.gguf`,
+	*  `<org>/<repo>/<f>.gguf`, `<org>/<repo>` or `<org>/<repo>:<QUANT>`. */
+	ref: string(),
+	/** Explicit ceiling override, in bytes. Absent = the built-in ceiling. */
+	maxBytes: number().positive().optional()
+}), HfModelResolutionSchema, {
+	kind: "mutation",
+	auth: "admin"
+}), method(object({
 	nodeId: string(),
 	model: ManagedModelRefSchema
 }), _void(), {
@@ -19239,6 +19334,17 @@ var maxSessionHoldMsField = {
 	default: 12e4,
 	step: 5e3
 };
+/**
+* Quiet period that closes an `audioMode: 'on-motion'` audio window. Floor of
+* 5s so a rearm can never degenerate into per-event stream churn; default 90s
+* comfortably outlives the gap between two PIR wakes on a battery camera.
+*/
+var audioMotionWindowMsField = {
+	min: 5e3,
+	max: 6e5,
+	default: 9e4,
+	step: 5e3
+};
 var motionFpsField = {
 	min: 1,
 	max: 30,
@@ -19415,6 +19521,27 @@ var RunnerCameraConfigSchema = object({
 	* resolved `CameraDetectionConfig`.
 	*/
 	maxSessionHoldMs: number().min(maxSessionHoldMsField.min).max(maxSessionHoldMsField.max).optional(),
+	/**
+	* Orchestrator-side quiet period (ms) that closes an `audioMode:
+	* 'on-motion'` audio window, measured from the LAST motion event.
+	*
+	* This exists because the falling edge cannot be relied on. Camera-native
+	* providers emit motion as a RISING EDGE ONLY (Reolink's Baichuan push and
+	* its email-push SMTP path both emit `detected: true` and never the
+	* counterpart); only the frame-diff analyzer emits falls. So on an
+	* onboard-only camera a window that closed only on `detected: false` never
+	* closed at all, and `on-motion` silently behaved as `always-on` — on a
+	* battery camera, the one failure mode the mode exists to prevent.
+	*
+	* Every motion event rearms this timer WITHOUT restarting the stream, so a
+	* burst of re-fires costs nothing. A falling edge, when one does arrive,
+	* still closes earlier via `motionCooldownMs` — whichever comes first wins.
+	*
+	* Not consumed by the runner: carried here so it shares the per-camera
+	* device-settings surface with `motionCooldownMs`, exactly like
+	* `maxSessionHoldMs`.
+	*/
+	audioMotionWindowMs: number().min(audioMotionWindowMsField.min).max(audioMotionWindowMsField.max).optional(),
 	motionFps: number().min(motionFpsField.min).max(motionFpsField.max).default(motionFpsField.default),
 	detectionFps: number().min(detectionFpsField.min).max(detectionFpsField.max).default(detectionFpsField.default),
 	motionStreamId: string(),
@@ -19510,7 +19637,7 @@ var RunnerCameraConfigSchema = object({
 	*/
 	inferenceDevices: array(RunnerInferenceDeviceSchema).readonly().optional()
 });
-motionFpsField.min, motionFpsField.max, motionFpsField.step, motionFpsField.default, detectionFpsField.min, detectionFpsField.max, detectionFpsField.step, detectionFpsField.default, motionCooldownMsField.min, motionCooldownMsField.max, motionCooldownMsField.step, motionCooldownMsField.default, maxSessionHoldMsField.min, maxSessionHoldMsField.max, maxSessionHoldMsField.step, maxSessionHoldMsField.default, occupancyRecheckSecField.min, occupancyRecheckSecField.max, occupancyRecheckSecField.step, occupancyRecheckSecField.default, occupancyRecheckFramesField.min, occupancyRecheckFramesField.max, occupancyRecheckFramesField.step, occupancyRecheckFramesField.default;
+motionFpsField.min, motionFpsField.max, motionFpsField.step, motionFpsField.default, detectionFpsField.min, detectionFpsField.max, detectionFpsField.step, detectionFpsField.default, motionCooldownMsField.min, motionCooldownMsField.max, motionCooldownMsField.step, motionCooldownMsField.default, maxSessionHoldMsField.min, maxSessionHoldMsField.max, maxSessionHoldMsField.step, maxSessionHoldMsField.default, audioMotionWindowMsField.min, audioMotionWindowMsField.max, audioMotionWindowMsField.step, audioMotionWindowMsField.default, occupancyRecheckSecField.min, occupancyRecheckSecField.max, occupancyRecheckSecField.step, occupancyRecheckSecField.default, occupancyRecheckFramesField.min, occupancyRecheckFramesField.max, occupancyRecheckFramesField.step, occupancyRecheckFramesField.default;
 /**
 * Runtime load summary returned by `getLocalLoad`. Used by the orchestrator's
 * load-balancing levels (L2 capacity-based, L3 hardware-aware) to decide
@@ -22224,6 +22351,25 @@ var BatteryStatusSchema = object({
 	/** Ms epoch of the last observation. Lets consumers reason about freshness. */
 	lastUpdated: number(),
 	/**
+	* Ms epoch of the last time the device PROVED it was reachable — a
+	* completed firmware round-trip, an observed wake, or an inbound push
+	* (firmware event, email). `0`/absent = never since this slice was born.
+	*
+	* This is the ONLY input that separates "asleep" from "gone", and it is
+	* fed exclusively by PASSIVE signals: nothing may write it by reaching
+	* for the radio, because a poll that confirms reachability is the same
+	* poll that drains the battery. See {@link deriveBatteryPresence} — the
+	* single derivation every consumer must use; no surface computes its own.
+	*
+	* It is deliberately NOT a clock in the
+	* `scripts/check-runtime-state-durability.ts` sense: it is the
+	* observation itself, and it is the only thing a 30-hour silence is
+	* visible in. Writers quantise it (see `CONTACT_WRITE_QUANTUM_MS` in the
+	* Reolink provider) so a value that means "recently" cannot cost a
+	* SQLite commit per round-trip.
+	*/
+	lastContactAt: number().optional(),
+	/**
 	* True when the source is a BINARY low-battery indicator (HA
 	* `binary_sensor` device_class=battery / `LOW_BAT`) that has no real
 	* charge level — `percentage` is then a coarse stand-in (100 = normal,
@@ -27727,6 +27873,33 @@ method(object({
 *  as `unknown`, never guessed. A day reference scored against an IR frame
 *  collapses the cosine and would latch a false alarm every single night. */
 var SceneConditionSchema = string();
+/**
+* What a scene does when the CURRENT light has no reference of its own.
+*
+* The lighting variants are not equally likely to exist. Almost every operator
+* captures daylight and then never stands outside at 22:00 to capture IR, and a
+* scene that is only ever going to be asked about a daytime question ("is the
+* bin still on the kerb at 08:00") does not need a night reference at all. The
+* night half must therefore be OPTIONAL, and optional means the scene keeps
+* working without it rather than degrading into a permanent complaint.
+*
+* - `skip` (default) — the check in that light is not made. Not a verdict, not
+*   an alarm, not even an `unknown`: the live state simply stays whatever the
+*   last covered light left it at, the latch is untouched, and the hysteresis
+*   run is neither spent nor cleared. The scene resumes by itself at first
+*   light. This is the only behaviour under which "I never captured IR" is a
+*   configuration choice instead of a nightly fault.
+* - `judge-anyway` — score against the OTHER conditions' references. Available
+*   for cameras whose IR frame is close enough to daylight (a floodlit
+*   driveway, an always-white-light doorbell), and wrong for everything else:
+*   cross-condition cosines are not comparable, so a day reference against a
+*   true IR frame collapses and the scene reports a theft at 21:40.
+*
+* Never applies when the scene has NO comparable reference at all — that is
+* "not armed yet", it is reported as `no-reference-for-condition`, and silence
+* there would hide a scene the operator never finished setting up.
+*/
+var SceneUncoveredPolicySchema = _enum(["skip", "judge-anyway"]);
 /** Reserved, engine-owned state id standing for "the region no longer looks
 *  like ANY captured reference". Never authored by an operator, never stored in
 *  `states[]` — it is the synthetic candidate that makes divergence a
@@ -27787,6 +27960,9 @@ var SceneCheckSchema = discriminatedUnion("mode", [object({
 	hysteresisCount: number().int().positive()
 })]);
 var SCENE_DEFAULT_ANCHOR_THRESHOLD = .85;
+/** Night is OPTIONAL. A scene with only a daylight reference sits the IR hours
+*  out in silence rather than reporting a fault every night. */
+var SCENE_DEFAULT_UNCOVERED_POLICY = "skip";
 var SCENE_CONFIRM_DEFAULT_TIMEOUT_MS = 8e3;
 /**
 * Vision-model adjudication of a candidate flip. Field names deliberately
@@ -27854,6 +28030,21 @@ var SceneMonitorSchema = object({
 	*  automation can react to the bin coming back without the operator's own
 	*  alarm silently clearing itself. */
 	autoRestore: boolean().default(false),
+	/** What to do when the current light has no reference of its own. See
+	*  {@link SceneUncoveredPolicySchema} — the default makes night OPTIONAL. */
+	onUncoveredCondition: SceneUncoveredPolicySchema.default(SCENE_DEFAULT_UNCOVERED_POLICY),
+	/**
+	* The light whose checks are currently being SAT OUT under
+	* `onUncoveredCondition: 'skip'` — `null` when the scene is checking normally.
+	*
+	* Engine-reported and advisory only: it moves no verdict, no latch and no
+	* hysteresis. It exists so the card can say *"night (IR) — checks paused,
+	* nothing captured in this light"* in the same calm voice as the coverage
+	* line, because the alternative is a scene that silently stops answering
+	* after sunset with nothing anywhere saying why. A skipped check must never
+	* read as a broken one.
+	*/
+	suspendedCondition: SceneConditionSchema.nullable().default(null),
 	/** Named cause when `verdict === 'unknown'`. */
 	unavailable: SceneUnavailableSchema.nullable(),
 	/** Conditions that have at least one comparable reference — the coverage line
@@ -27907,6 +28098,7 @@ var sceneMonitorCapability = {
 				minObservationSpacingSec: number().int().min(0).max(3600).optional(),
 				anchorThreshold: number().min(0).max(1).optional(),
 				autoRestore: boolean().optional(),
+				onUncoveredCondition: SceneUncoveredPolicySchema.optional(),
 				/** `null` clears the vision-model adjudicator. */
 				confirm: SceneConfirmSchema.nullable().optional()
 			})
@@ -28205,7 +28397,70 @@ var CamStreamDescriptorSchema = object({
 	/** Transport-specific opaque metadata (e.g. rfc4571 SDP). */
 	metadata: record(string(), unknown()).optional()
 });
-DeviceType.Camera, method(object({ deviceId: number().int().nonnegative() }), array(CamStreamDescriptorSchema).readonly());
+/**
+* `stream-catalog` — device-scoped, provider-implemented. The pull counterpart
+* of the removed `publishCameraStream` push: a camera provider returns the full
+* set of stream descriptors it can offer for the device, synchronously, so the
+* broker can reconcile its registry against the authoritative provider state.
+*/
+/**
+* The catalog as a DURABLE fact rather than a live answer.
+*
+* A battery camera's descriptors are profile-stable — they change when the
+* operator rewrites an encoder profile, not minute to minute — but building
+* them costs a Baichuan login, which on a sleeping Argus IS a wake. So the
+* provider is allowed to build them exactly once per profile and must serve
+* every later pull from a cache.
+*
+* Holding that cache only in RAM is what turned a restart into an outage. The
+* runner comes back with the camera asleep, `buildStreamCatalogUncached`
+* correctly refuses to wake it, the pull answers `[]`, the broker has no
+* cam-stream entry to build a broker from, and `webrtcSession.handleOffer`
+* fails with a flat "No broker for stream" — for as long as the camera sleeps,
+* which on a battery cam is most of the day. The camera was fine. The stream
+* was unreachable because the process had forgotten what the camera offers.
+*
+* Declaring it here puts it in `device-runtime-state`, the kernel's canonical
+* declared collection, with the same `restored` durability `battery` uses for
+* the same reason: the last known value is the only value there is while the
+* device is asleep. The broker's brokers are therefore always DEFINABLE — it
+* is the DIAL that wakes a camera, never the catalog (D173).
+*/
+var StreamCatalogStateSchema = object({
+	/** The descriptors as last built from a real camera response. Never a guess:
+	*  a failed or refused build writes NOTHING, so a restored catalog is always
+	*  one the camera itself once produced. */
+	descriptors: array(CamStreamDescriptorSchema),
+	/** Ms epoch of the build that produced {@link descriptors}. Lets the wake
+	*  path decide whether the camera's own awake window is worth spending on a
+	*  re-read. */
+	lastFetchedAt: number()
+});
+var streamCatalogCapability = {
+	name: "stream-catalog",
+	scope: "device",
+	deviceNative: true,
+	mode: "singleton",
+	deviceTypes: [DeviceType.Camera],
+	methods: { getCatalog: method(object({ deviceId: number().int().nonnegative() }), array(CamStreamDescriptorSchema).readonly()) },
+	runtimeState: StreamCatalogStateSchema,
+	/**
+	* Runtime-state durability: **restored** — see the schema doc. A cold
+	* catalog on a sleeping battery camera is not a slow first frame, it is a
+	* camera that cannot be watched at all until it happens to wake.
+	*
+	* Churn is nil by construction: the slice is written only by a SUCCESSFUL
+	* build, and a build only runs when there is no cached copy (or the copy is
+	* a day old and the camera is awake anyway).
+	*
+	* See `RuntimeStateDurability`. Enforced by
+	* `scripts/check-runtime-state-durability.ts`.
+	*/
+	durability: "restored",
+	/** Clock field: written, but excluded from the compare that decides whether
+	*  persisting is worth a SQLite commit — the descriptors are the value. */
+	volatileStateFields: ["lastFetchedAt"]
+};
 /** One of the camera's stream profiles. */
 var StreamProfileSchema = _enum([
 	"main",
@@ -29909,6 +30164,7 @@ var DEVICE_LOCAL_STATE_CAPS = {
 	sceneMonitor: sceneMonitorCapability,
 	scriptRunner: scriptRunnerCapability,
 	smoke: smokeCapability,
+	streamCatalog: streamCatalogCapability,
 	streamParams: streamParamsCapability,
 	switch: switchCapability,
 	tamper: tamperCapability,
@@ -32795,6 +33051,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"llm.resolveModelRef": {
+		capName: "llm",
+		capScope: "system",
+		addonId: null,
+		access: "create"
+	},
 	"llm.setDefault": {
 		capName: "llm",
 		capScope: "system",
@@ -38730,6 +38992,12 @@ Object.defineProperty(exports, "SCENE_DEFAULT_ANCHOR_THRESHOLD", {
 		return SCENE_DEFAULT_ANCHOR_THRESHOLD;
 	}
 });
+Object.defineProperty(exports, "SCENE_DEFAULT_UNCOVERED_POLICY", {
+	enumerable: true,
+	get: function() {
+		return SCENE_DEFAULT_UNCOVERED_POLICY;
+	}
+});
 Object.defineProperty(exports, "SCENE_DIVERGED", {
 	enumerable: true,
 	get: function() {