@camstack/addon-post-analysis 1.2.639 → 1.2.640

package/dist/{clip-model-registry-B-Dv5y3Z.mjs → clip-model-registry-B1HxbGuP.mjs}

@@ -11026,7 +11026,7 @@ function sleep(ms) {
 	return new Promise((resolve) => setTimeout(resolve, Math.max(0, ms)));
 }
 //#endregion
-//#region ../types/dist/err-msg-BXKzRBwg.mjs
+//#region ../types/dist/err-msg-DIorGYeC.mjs
 var DeviceType = /* @__PURE__ */ function(DeviceType) {
 	DeviceType["Camera"] = "camera";
 	DeviceType["Hub"] = "hub";
@@ -11120,8 +11120,14 @@ var DeviceType = /* @__PURE__ */ function(DeviceType) {
 	DeviceType["PetFeeder"] = "pet-feeder";
 	/** Built-in dishwasher — program lifecycle, door / remote-start gates,
 	*  salt and rinse-aid levels. Installed with the `dishwasher` cap.
-	*  Sources: native Bosch Home Connect, reusable by similar integrations. */
+	*  Sources: native Bosch Home Connect, reusable by similar integrations.
+	*  A plug-built dishwasher carries running-state and power instead. */
 	DeviceType["Dishwasher"] = "dishwasher";
+	/** Washing machine. A plug-built one is running while its power stays
+	*  above a threshold. No program cap — that surface is the dishwasher's. */
+	DeviceType["Washer"] = "washer";
+	/** Tumble dryer. Same plug-built running surface as {@link Washer}. */
+	DeviceType["Dryer"] = "dryer";
 	return DeviceType;
 }({});
 var DeviceFeature = /* @__PURE__ */ function(DeviceFeature) {
@@ -11379,7 +11385,7 @@ function errMsg(err) {
 	return String(err);
 }
 //#endregion
-//#region ../types/dist/composition-OhpuespA.mjs
+//#region ../types/dist/composition-B2rw5L29.mjs
 /**
 * Deterministic SHA-256 hash of an arbitrary serialisable value. The
 * canonical form sorts object keys alphabetically at every depth so two
@@ -12295,6 +12301,26 @@ function validateExpressionSource(src) {
 	return null;
 }
 /**
+* One power reading becomes a washer, dryer or dishwasher (D944 helper).
+*
+* Standby of the control board is under 5 W; a motor or a heater is far
+* above that, so 5 W is the line. A door lock or a short pump spike is not
+* a cycle, so running starts only after 30 s above the line.
+*
+* A wash, dry or dishwasher pause (soak, heat-wait, heater off between
+* bursts) lasts several minutes. Ending the cycle on the first dip would
+* report "finished" in the middle of the program, so the stop dwell is
+* 10 minutes on every type. The number is stored per type so one machine
+* can move later without moving the others.
+*/
+var APPLIANCE_TEMPLATE_ID = "appliance";
+var APPLIANCE_KINDS = [
+	"washer",
+	"dryer",
+	"dishwasher"
+];
+DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher;
+/**
 * A composition source identity: `(addonId, stableId)`, never a numeric device
 * id. Split out so helper schemas can name it without a cycle through
 * `composition.ts` (D659).
@@ -12357,6 +12383,14 @@ var HelperSpecSchema = discriminatedUnion("kind", [object({
 	members: array(HelperMemberSchema).min(1).max(64),
 	/** Actuator groups only. Readings leave this unset. */
 	active: ActiveCriterionSchema.optional()
+}), object({
+	kind: literal("appliance"),
+	templateId: literal(APPLIANCE_TEMPLATE_ID),
+	appliance: _enum(APPLIANCE_KINDS),
+	thresholdWatts: number().positive(),
+	startDwellMs: number().int().nonnegative(),
+	stopDwellMs: number().int().nonnegative(),
+	member: HelperMemberSchema
 })]);
 /** A composed device's stableId is this prefix plus the block id. */
 var COMPOSED_DEVICE_STABLE_ID_PREFIX = "composed-";
@@ -67531,7 +67565,12 @@ var powerMeterCapability = {
 	scope: "device",
 	deviceNative: true,
 	mode: "singleton",
-	deviceTypes: [DeviceType.Sensor],
+	deviceTypes: [
+		DeviceType.Sensor,
+		DeviceType.Washer,
+		DeviceType.Dryer,
+		DeviceType.Dishwasher
+	],
 	methods: {},
 	status: {
 		schema: PowerMeterStatusSchema,
@@ -68269,6 +68308,8 @@ var runningCustomize = {
 			stateField: "running"
 		},
 		deviceTypes: [
+			DeviceType.Washer,
+			DeviceType.Dryer,
 			DeviceType.Dishwasher,
 			DeviceType.Vacuum,
 			DeviceType.LawnMower,
@@ -73022,7 +73063,7 @@ method(object({}), array(TrainingBaseModelSchema).readonly(), { auth: "admin" })
 	auth: "admin"
 });
 SOURCE_CAPS.filter((cap) => cap !== "switch" && cap !== "motion");
-DeviceType.Camera, DeviceType.Sensor, DeviceType.Button, DeviceType.Switch, DeviceType.PetFeeder, DeviceType.Container, DeviceType.Thermostat, DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Camera, DeviceType.Camera, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
+DeviceType.Camera, DeviceType.Sensor, DeviceType.Button, DeviceType.Switch, DeviceType.PetFeeder, DeviceType.Container, DeviceType.Thermostat, DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer, DeviceType.Camera, DeviceType.Camera, DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
 String.raw`rose\(active(\d+), changed(\d+), (\d+(?:\.\d+)?)\)`;
 DeviceRole.BinarySensor, DeviceRole.MotionSensor;
 new Set(CAP_NAMES);
@@ -74191,7 +74232,7 @@ var DeclaredDevices = class {
 		return removed;
 	}
 };
-DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Camera, DeviceType.Hub, DeviceType.Switch, DeviceType.Siren, DeviceType.Light, DeviceType.Fan, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher;
+DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Camera, DeviceType.Hub, DeviceType.Switch, DeviceType.Siren, DeviceType.Light, DeviceType.Fan, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer;
 new Set(Object.values(DeviceType));
 Object.freeze({
 	"accessories.getStatus": {
@@ -86478,7 +86519,39 @@ var APPLIANCE_CAP_VOCABULARY = {
 				phrase: t("When {device} finishes", "Quando {device} finisce"),
 				icon: "square"
 			}
-		}
+		},
+		overrides: { byType: {
+			[DeviceType.Washer]: {
+				state: { running: {
+					whenTrue: t("When the washing machine starts", "Quando la lavatrice inizia"),
+					whenFalse: t("When the washing machine has finished", "Quando la lavatrice ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the washing machine starts", "Quando la lavatrice inizia") },
+					onFinished: { phrase: t("When the washing machine has finished", "Quando la lavatrice ha finito") }
+				}
+			},
+			[DeviceType.Dryer]: {
+				state: { running: {
+					whenTrue: t("When the dryer starts", "Quando l'asciugatrice inizia"),
+					whenFalse: t("When the dryer has finished", "Quando l'asciugatrice ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the dryer starts", "Quando l'asciugatrice inizia") },
+					onFinished: { phrase: t("When the dryer has finished", "Quando l'asciugatrice ha finito") }
+				}
+			},
+			[DeviceType.Dishwasher]: {
+				state: { running: {
+					whenTrue: t("When the dishwasher starts", "Quando la lavastoviglie inizia"),
+					whenFalse: t("When the dishwasher has finished", "Quando la lavastoviglie ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the dishwasher starts", "Quando la lavastoviglie inizia") },
+					onFinished: { phrase: t("When the dishwasher has finished", "Quando la lavastoviglie ha finito") }
+				}
+			}
+		} }
 	},
 	update: {
 		scope: "device",
@@ -87778,8 +87851,47 @@ function projectAction(cap, action) {
 	};
 }
 Object.entries(CAP_VOCABULARY_BY_NAME).flatMap(([cap, entry]) => entry.scope === "device" ? (entry.actions ?? []).map((a) => projectAction(cap, a)) : []);
-DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher;
+DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer;
 DeviceFeature.BatteryOperated;
+DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher;
+var HA_AS = "a power sensor (device_class power). Home Assistant has no laundry domain. running-state stays unexported until a null reading can be published as unavailable.";
+var HOMEKIT_REASON = "HomeKit has no laundry-appliance service. The export tab would pair an accessory with nothing on it: running-state is withheld until a null reading can be unavailable, and power is not a HomeKit service this export honours.";
+var ALEXA_REASON = "Alexa has no laundry category in this export, and neither power nor running has an Alexa interface.";
+var GOOGLE_REASON = "Google WASHER, DRYER and DISHWASHER require RunCycle. A power threshold is not that trait, and this export does not publish RunCycle.";
+var MATTER_REASON = "No Matter export is built. The closest device types are Laundry Washer (0x0073) and Laundry Dryer (0x0074); a power threshold is not the Laundry Washer Mode cluster.";
+function withheld(reason) {
+	return {
+		[DeviceType.Washer]: {
+			exported: false,
+			reason
+		},
+		[DeviceType.Dryer]: {
+			exported: false,
+			reason
+		},
+		[DeviceType.Dishwasher]: {
+			exported: false,
+			reason
+		}
+	};
+}
+function offered(received) {
+	return {
+		[DeviceType.Washer]: {
+			exported: true,
+			as: received
+		},
+		[DeviceType.Dryer]: {
+			exported: true,
+			as: received
+		},
+		[DeviceType.Dishwasher]: {
+			exported: true,
+			as: received
+		}
+	};
+}
+offered(HA_AS), withheld(HOMEKIT_REASON), withheld(ALEXA_REASON), withheld(GOOGLE_REASON), withheld(MATTER_REASON);
 Object.freeze({
 	"accessories.getStatus": [{
 		name: "deviceId",

package/dist/{clip-model-registry-DEcrrqRz.js → clip-model-registry-C8xdbChV.js}

@@ -11057,7 +11057,7 @@ function sleep(ms) {
 	return new Promise((resolve) => setTimeout(resolve, Math.max(0, ms)));
 }
 //#endregion
-//#region ../types/dist/err-msg-BXKzRBwg.mjs
+//#region ../types/dist/err-msg-DIorGYeC.mjs
 var DeviceType = /* @__PURE__ */ function(DeviceType) {
 	DeviceType["Camera"] = "camera";
 	DeviceType["Hub"] = "hub";
@@ -11151,8 +11151,14 @@ var DeviceType = /* @__PURE__ */ function(DeviceType) {
 	DeviceType["PetFeeder"] = "pet-feeder";
 	/** Built-in dishwasher — program lifecycle, door / remote-start gates,
 	*  salt and rinse-aid levels. Installed with the `dishwasher` cap.
-	*  Sources: native Bosch Home Connect, reusable by similar integrations. */
+	*  Sources: native Bosch Home Connect, reusable by similar integrations.
+	*  A plug-built dishwasher carries running-state and power instead. */
 	DeviceType["Dishwasher"] = "dishwasher";
+	/** Washing machine. A plug-built one is running while its power stays
+	*  above a threshold. No program cap — that surface is the dishwasher's. */
+	DeviceType["Washer"] = "washer";
+	/** Tumble dryer. Same plug-built running surface as {@link Washer}. */
+	DeviceType["Dryer"] = "dryer";
 	return DeviceType;
 }({});
 var DeviceFeature = /* @__PURE__ */ function(DeviceFeature) {
@@ -11410,7 +11416,7 @@ function errMsg(err) {
 	return String(err);
 }
 //#endregion
-//#region ../types/dist/composition-OhpuespA.mjs
+//#region ../types/dist/composition-B2rw5L29.mjs
 /**
 * Deterministic SHA-256 hash of an arbitrary serialisable value. The
 * canonical form sorts object keys alphabetically at every depth so two
@@ -12326,6 +12332,26 @@ function validateExpressionSource(src) {
 	return null;
 }
 /**
+* One power reading becomes a washer, dryer or dishwasher (D944 helper).
+*
+* Standby of the control board is under 5 W; a motor or a heater is far
+* above that, so 5 W is the line. A door lock or a short pump spike is not
+* a cycle, so running starts only after 30 s above the line.
+*
+* A wash, dry or dishwasher pause (soak, heat-wait, heater off between
+* bursts) lasts several minutes. Ending the cycle on the first dip would
+* report "finished" in the middle of the program, so the stop dwell is
+* 10 minutes on every type. The number is stored per type so one machine
+* can move later without moving the others.
+*/
+var APPLIANCE_TEMPLATE_ID = "appliance";
+var APPLIANCE_KINDS = [
+	"washer",
+	"dryer",
+	"dishwasher"
+];
+DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher;
+/**
 * A composition source identity: `(addonId, stableId)`, never a numeric device
 * id. Split out so helper schemas can name it without a cycle through
 * `composition.ts` (D659).
@@ -12388,6 +12414,14 @@ var HelperSpecSchema = discriminatedUnion("kind", [object({
 	members: array(HelperMemberSchema).min(1).max(64),
 	/** Actuator groups only. Readings leave this unset. */
 	active: ActiveCriterionSchema.optional()
+}), object({
+	kind: literal("appliance"),
+	templateId: literal(APPLIANCE_TEMPLATE_ID),
+	appliance: _enum(APPLIANCE_KINDS),
+	thresholdWatts: number().positive(),
+	startDwellMs: number().int().nonnegative(),
+	stopDwellMs: number().int().nonnegative(),
+	member: HelperMemberSchema
 })]);
 /** A composed device's stableId is this prefix plus the block id. */
 var COMPOSED_DEVICE_STABLE_ID_PREFIX = "composed-";
@@ -67562,7 +67596,12 @@ var powerMeterCapability = {
 	scope: "device",
 	deviceNative: true,
 	mode: "singleton",
-	deviceTypes: [DeviceType.Sensor],
+	deviceTypes: [
+		DeviceType.Sensor,
+		DeviceType.Washer,
+		DeviceType.Dryer,
+		DeviceType.Dishwasher
+	],
 	methods: {},
 	status: {
 		schema: PowerMeterStatusSchema,
@@ -68300,6 +68339,8 @@ var runningCustomize = {
 			stateField: "running"
 		},
 		deviceTypes: [
+			DeviceType.Washer,
+			DeviceType.Dryer,
 			DeviceType.Dishwasher,
 			DeviceType.Vacuum,
 			DeviceType.LawnMower,
@@ -73053,7 +73094,7 @@ method(object({}), array(TrainingBaseModelSchema).readonly(), { auth: "admin" })
 	auth: "admin"
 });
 SOURCE_CAPS.filter((cap) => cap !== "switch" && cap !== "motion");
-DeviceType.Camera, DeviceType.Sensor, DeviceType.Button, DeviceType.Switch, DeviceType.PetFeeder, DeviceType.Container, DeviceType.Thermostat, DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Camera, DeviceType.Camera, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
+DeviceType.Camera, DeviceType.Sensor, DeviceType.Button, DeviceType.Switch, DeviceType.PetFeeder, DeviceType.Container, DeviceType.Thermostat, DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer, DeviceType.Camera, DeviceType.Camera, DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
 String.raw`rose\(active(\d+), changed(\d+), (\d+(?:\.\d+)?)\)`;
 DeviceRole.BinarySensor, DeviceRole.MotionSensor;
 new Set(CAP_NAMES);
@@ -74222,7 +74263,7 @@ var DeclaredDevices = class {
 		return removed;
 	}
 };
-DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Camera, DeviceType.Hub, DeviceType.Switch, DeviceType.Siren, DeviceType.Light, DeviceType.Fan, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher;
+DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Camera, DeviceType.Hub, DeviceType.Switch, DeviceType.Siren, DeviceType.Light, DeviceType.Fan, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer;
 new Set(Object.values(DeviceType));
 Object.freeze({
 	"accessories.getStatus": {
@@ -86509,7 +86550,39 @@ var APPLIANCE_CAP_VOCABULARY = {
 				phrase: t("When {device} finishes", "Quando {device} finisce"),
 				icon: "square"
 			}
-		}
+		},
+		overrides: { byType: {
+			[DeviceType.Washer]: {
+				state: { running: {
+					whenTrue: t("When the washing machine starts", "Quando la lavatrice inizia"),
+					whenFalse: t("When the washing machine has finished", "Quando la lavatrice ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the washing machine starts", "Quando la lavatrice inizia") },
+					onFinished: { phrase: t("When the washing machine has finished", "Quando la lavatrice ha finito") }
+				}
+			},
+			[DeviceType.Dryer]: {
+				state: { running: {
+					whenTrue: t("When the dryer starts", "Quando l'asciugatrice inizia"),
+					whenFalse: t("When the dryer has finished", "Quando l'asciugatrice ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the dryer starts", "Quando l'asciugatrice inizia") },
+					onFinished: { phrase: t("When the dryer has finished", "Quando l'asciugatrice ha finito") }
+				}
+			},
+			[DeviceType.Dishwasher]: {
+				state: { running: {
+					whenTrue: t("When the dishwasher starts", "Quando la lavastoviglie inizia"),
+					whenFalse: t("When the dishwasher has finished", "Quando la lavastoviglie ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the dishwasher starts", "Quando la lavastoviglie inizia") },
+					onFinished: { phrase: t("When the dishwasher has finished", "Quando la lavastoviglie ha finito") }
+				}
+			}
+		} }
 	},
 	update: {
 		scope: "device",
@@ -87809,8 +87882,47 @@ function projectAction(cap, action) {
 	};
 }
 Object.entries(CAP_VOCABULARY_BY_NAME).flatMap(([cap, entry]) => entry.scope === "device" ? (entry.actions ?? []).map((a) => projectAction(cap, a)) : []);
-DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher;
+DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer;
 DeviceFeature.BatteryOperated;
+DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher;
+var HA_AS = "a power sensor (device_class power). Home Assistant has no laundry domain. running-state stays unexported until a null reading can be published as unavailable.";
+var HOMEKIT_REASON = "HomeKit has no laundry-appliance service. The export tab would pair an accessory with nothing on it: running-state is withheld until a null reading can be unavailable, and power is not a HomeKit service this export honours.";
+var ALEXA_REASON = "Alexa has no laundry category in this export, and neither power nor running has an Alexa interface.";
+var GOOGLE_REASON = "Google WASHER, DRYER and DISHWASHER require RunCycle. A power threshold is not that trait, and this export does not publish RunCycle.";
+var MATTER_REASON = "No Matter export is built. The closest device types are Laundry Washer (0x0073) and Laundry Dryer (0x0074); a power threshold is not the Laundry Washer Mode cluster.";
+function withheld(reason) {
+	return {
+		[DeviceType.Washer]: {
+			exported: false,
+			reason
+		},
+		[DeviceType.Dryer]: {
+			exported: false,
+			reason
+		},
+		[DeviceType.Dishwasher]: {
+			exported: false,
+			reason
+		}
+	};
+}
+function offered(received) {
+	return {
+		[DeviceType.Washer]: {
+			exported: true,
+			as: received
+		},
+		[DeviceType.Dryer]: {
+			exported: true,
+			as: received
+		},
+		[DeviceType.Dishwasher]: {
+			exported: true,
+			as: received
+		}
+	};
+}
+offered(HA_AS), withheld(HOMEKIT_REASON), withheld(ALEXA_REASON), withheld(GOOGLE_REASON), withheld(MATTER_REASON);
 Object.freeze({
 	"accessories.getStatus": [{
 		name: "deviceId",

package/dist/embedding-encoder/index.js

@@ -2,7 +2,7 @@ Object.defineProperties(exports, {
 	__esModule: { value: true },
 	[Symbol.toStringTag]: { value: "Module" }
 });
-const require_clip_model_registry = require("../clip-model-registry-DEcrrqRz.js");
+const require_clip_model_registry = require("../clip-model-registry-C8xdbChV.js");
 let node_fs = require("node:fs");
 node_fs = require_clip_model_registry.__toESM(node_fs);
 let node_path = require("node:path");

package/dist/embedding-encoder/index.mjs

@@ -1,4 +1,4 @@
-import { Qi as BaseAddon, _r as embeddingRequirementsUnavailableError, a as CLIP_EMBEDDING_STEP_ID, da as normalizeNodeId, gi as resolvePoolMemoryPolicy, gr as embeddingRequirementsFailedError, i as CLIP_TEXT_MODELS, l as resolveClusterModelPin, mr as embeddingModelFailedError, n as DEFAULT_CLIP_MODEL, ni as parseProcStatus, pr as embeddingEncoderCapability, r as CLIP_IMAGE_MODELS, t as BUILTIN_CLIP_MODELS, tn as PoolMemoryWatchdog } from "../clip-model-registry-B-Dv5y3Z.mjs";
+import { Qi as BaseAddon, _r as embeddingRequirementsUnavailableError, a as CLIP_EMBEDDING_STEP_ID, da as normalizeNodeId, gi as resolvePoolMemoryPolicy, gr as embeddingRequirementsFailedError, i as CLIP_TEXT_MODELS, l as resolveClusterModelPin, mr as embeddingModelFailedError, n as DEFAULT_CLIP_MODEL, ni as parseProcStatus, pr as embeddingEncoderCapability, r as CLIP_IMAGE_MODELS, t as BUILTIN_CLIP_MODELS, tn as PoolMemoryWatchdog } from "../clip-model-registry-B1HxbGuP.mjs";
 import { createRequire } from "node:module";
 import * as fs from "node:fs";
 import * as path$1 from "node:path";

package/dist/pipeline-analytics/_stub.js

@@ -1,8 +1,8 @@
 import { a as e, i as t, n, o as r, r as i, t as a } from "./_virtual_mf___mfe_internal__addon_pipeline_analytics_widgets__loadShare__react__loadShare__.js-Cx9AsA5q.mjs";
 import { t as o } from "./_virtual_mf___mfe_internal__addon_pipeline_analytics_widgets__loadShare___mf_0_tanstack_mf_1_react_mf_2_query__loadShare__.js-B3Wx5J80.mjs";
-import { a as s, c, d as l, f as u, i as d, l as f, m as p, n as m, o as h, p as g, r as _, s as v, t as y, u as b } from "./_virtual_mf___mfe_internal__addon_pipeline_analytics_widgets__loadShare___mf_0_camstack_mf_1_ui_mf_2_library__loadShare__.js-Cc4lAtK3.mjs";
+import { a as s, c, d as l, f as u, i as d, l as f, m as p, n as m, o as h, p as g, r as _, s as v, t as y, u as b } from "./_virtual_mf___mfe_internal__addon_pipeline_analytics_widgets__loadShare___mf_0_camstack_mf_1_ui_mf_2_library__loadShare__.js-DIbQ2FJ4.mjs";
 import { n as x, t as S } from "./_virtual_mf___mfe_internal__addon_pipeline_analytics_widgets__loadShare__react_mf_1_jsx_mf_2_runtime__loadShare__.js-CkwmHEi0.mjs";
-import { t as C } from "./_virtual_mf___mfe_internal__addon_pipeline_analytics_widgets__loadShare___mf_0_camstack_mf_1_types__loadShare__.js-D4TYbuPV.mjs";
+import { t as C } from "./_virtual_mf___mfe_internal__addon_pipeline_analytics_widgets__loadShare___mf_0_camstack_mf_1_types__loadShare__.js-CENVyAAQ.mjs";
 //#region ../../node_modules/lucide-react/dist/esm/shared/src/utils/mergeClasses.js
 var w = (...e) => e.filter((e, t, n) => !!e && e.trim() !== "" && n.indexOf(e) === t).join(" ").trim(), T = (e) => e.replace(/([a-z0-9])([A-Z])/g, "$1-$2").toLowerCase(), E = (e) => e.replace(/^([A-Z])|[\s-_]+(\w)/g, (e, t, n) => n ? n.toUpperCase() : t.toLowerCase()), D = (e) => {
 	let t = E(e);

package/dist/pipeline-analytics/{_virtual_mf-localSharedImportMap___mfe_internal__addon_pipeline_analytics_widgets-DRZLmZDb.mjs → _virtual_mf-localSharedImportMap___mfe_internal__addon_pipeline_analytics_widgets-CO5qrMxU.mjs}

@@ -18,7 +18,7 @@ var e = {
 	},
 	"@camstack/types": {
 		name: "@camstack/types",
-		version: "1.2.419",
+		version: "1.2.421",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_pipeline_analytics_widgets",
@@ -33,7 +33,7 @@ var e = {
 	},
 	"@camstack/ui-library": {
 		name: "@camstack/ui-library",
-		version: "1.2.331",
+		version: "1.2.333",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_pipeline_analytics_widgets",