@camstack/addon-post-analysis 1.2.248 → 1.2.250

package/dist/{dist-DmB50uQ-.js → dist-B8eT-EWR.js}

@@ -20694,13 +20694,26 @@ var TrackAudioLabelSchema = object({
 *  - `audio` — an audio event on the camera itself that was anomalous for
 *    THAT camera, loud, and heard while nothing visual was happening (D62).
 *
+*  - `onboard` — the CAMERA's own firmware, paired with a decoded frame in
+*    that frame's pixel space. A real root detector and a SPATIAL one: its
+*    boxes are the same kind of fact `pipeline`'s are, produced by a different
+*    detector.
+*
+* `onboard` was missing here while `DetectionSourceSchema` already had it, so
+* a persisted onboard track failed `safeParse` on read and came back with NO
+* source at all — which `isSpatialTrack` then admitted by accident, through the
+* `undefined` arm rather than by anybody's decision, and which `excludeSources`
+* could not name.
+*
 * The spatial subsystems (tracker association, occupancy count, re-id /
 * embedding, resurrection) MUST skip every synthetic source. Test for that
-* with `isSpatialTrack`, which allow-lists `pipeline` — a `!== 'sensor'`
-* check silently readmits every source added after it was written.
+* with `isSpatialTrack`, which allow-lists the spatial sources explicitly — a
+* `!== 'sensor'` check silently readmits every source added after it was
+* written.
 */
 var TrackSourceSchema = _enum([
 	"pipeline",
+	"onboard",
 	"sensor",
 	"audio"
 ]);
@@ -21288,6 +21301,7 @@ var MediaFileKindEnum = _enum([
 	"keyFrame",
 	"keyFrameSmall",
 	"thumbnailSmall",
+	"confirmationCrop",
 	"sceneFrame"
 ]);
 /**
@@ -23433,13 +23447,39 @@ var MotionSourceEnum = _enum([
 */
 var MotionSourcesSchema = array(MotionSourceEnum);
 /**
-* Which root detectors a camera runs. Deliberately the SAME vocabulary
-* post-analysis already tags every detection with (`DetectionSource`) rather
-* than a second spelling of the same two ideas — the value an operator picks
-* here is the value that comes back on the track, the overlay and the debug
-* row.
+* Which root detector a camera runs — EXACTLY ONE.
+*
+* Deliberately the SAME vocabulary post-analysis already tags every detection
+* with (`DetectionSource`) rather than a second spelling of the same two
+* ideas: the value an operator picks here is the value that comes back on the
+* track, the overlay and the debug row.
+*
+* ## Why one, and why it is still an array
+*
+* Two roots on one camera is a capability nobody asked for and the operator has
+* since ruled out. It was never free: both planes feed the SAME per-device
+* stationary registry, both can promote the same parked object, and the two
+* detectors disagree about the same box by construction — which is the
+* disagreement D505 had to arbitrate. Removing the case removes the arbitration.
+*
+* The ARRAY shape survives because the stored settings and the attach payload
+* already speak it on every camera of every fleet, and a cap input that
+* suddenly refuses a stored value makes the camera un-attachable — a fail-closed
+* in the one direction that costs an operator their cameras. So the wire stays
+* tolerant and the TYPE is exact: a longer list is truncated to its first
+* element rather than refused, and `max(1)` is what every consumer can then
+* rely on.
+*
+* AT MOST one, not exactly one. The EMPTY list is a legal, deliberate pick —
+* a camera an operator left with no root detector — and `planDetectionSources`
+* has always said so: inventing a root for them is how a default acts without
+* anybody choosing it. Tightening this to `length(1)` broke that, and the
+* suite caught it.
+*
+* Measured before tightening (2026-09-15, this fleet, 6 h of attaches): 3327
+* `["pipeline"]` and 2 `["onboard"]`. Not one camera had two.
 */
-var DetectionSourcesSchema = array(DetectionSourceSchema);
+var DetectionSourcesSchema = preprocess((value) => Array.isArray(value) && value.length > 1 ? value.slice(0, 1) : value, array(DetectionSourceSchema).max(1));
 /**
 * Input shape for `pipeline-runner.reportMotion` cap method. Exported
 * so cap-side consumers (the orchestrator forward, the runner addon's

package/dist/{dist-KRjxHIQ4.mjs → dist-BgBv6Xzq.mjs}

@@ -20663,13 +20663,26 @@ var TrackAudioLabelSchema = object({
 *  - `audio` — an audio event on the camera itself that was anomalous for
 *    THAT camera, loud, and heard while nothing visual was happening (D62).
 *
+*  - `onboard` — the CAMERA's own firmware, paired with a decoded frame in
+*    that frame's pixel space. A real root detector and a SPATIAL one: its
+*    boxes are the same kind of fact `pipeline`'s are, produced by a different
+*    detector.
+*
+* `onboard` was missing here while `DetectionSourceSchema` already had it, so
+* a persisted onboard track failed `safeParse` on read and came back with NO
+* source at all — which `isSpatialTrack` then admitted by accident, through the
+* `undefined` arm rather than by anybody's decision, and which `excludeSources`
+* could not name.
+*
 * The spatial subsystems (tracker association, occupancy count, re-id /
 * embedding, resurrection) MUST skip every synthetic source. Test for that
-* with `isSpatialTrack`, which allow-lists `pipeline` — a `!== 'sensor'`
-* check silently readmits every source added after it was written.
+* with `isSpatialTrack`, which allow-lists the spatial sources explicitly — a
+* `!== 'sensor'` check silently readmits every source added after it was
+* written.
 */
 var TrackSourceSchema = _enum([
 	"pipeline",
+	"onboard",
 	"sensor",
 	"audio"
 ]);
@@ -21257,6 +21270,7 @@ var MediaFileKindEnum = _enum([
 	"keyFrame",
 	"keyFrameSmall",
 	"thumbnailSmall",
+	"confirmationCrop",
 	"sceneFrame"
 ]);
 /**
@@ -23402,13 +23416,39 @@ var MotionSourceEnum = _enum([
 */
 var MotionSourcesSchema = array(MotionSourceEnum);
 /**
-* Which root detectors a camera runs. Deliberately the SAME vocabulary
-* post-analysis already tags every detection with (`DetectionSource`) rather
-* than a second spelling of the same two ideas — the value an operator picks
-* here is the value that comes back on the track, the overlay and the debug
-* row.
+* Which root detector a camera runs — EXACTLY ONE.
+*
+* Deliberately the SAME vocabulary post-analysis already tags every detection
+* with (`DetectionSource`) rather than a second spelling of the same two
+* ideas: the value an operator picks here is the value that comes back on the
+* track, the overlay and the debug row.
+*
+* ## Why one, and why it is still an array
+*
+* Two roots on one camera is a capability nobody asked for and the operator has
+* since ruled out. It was never free: both planes feed the SAME per-device
+* stationary registry, both can promote the same parked object, and the two
+* detectors disagree about the same box by construction — which is the
+* disagreement D505 had to arbitrate. Removing the case removes the arbitration.
+*
+* The ARRAY shape survives because the stored settings and the attach payload
+* already speak it on every camera of every fleet, and a cap input that
+* suddenly refuses a stored value makes the camera un-attachable — a fail-closed
+* in the one direction that costs an operator their cameras. So the wire stays
+* tolerant and the TYPE is exact: a longer list is truncated to its first
+* element rather than refused, and `max(1)` is what every consumer can then
+* rely on.
+*
+* AT MOST one, not exactly one. The EMPTY list is a legal, deliberate pick —
+* a camera an operator left with no root detector — and `planDetectionSources`
+* has always said so: inventing a root for them is how a default acts without
+* anybody choosing it. Tightening this to `length(1)` broke that, and the
+* suite caught it.
+*
+* Measured before tightening (2026-09-15, this fleet, 6 h of attaches): 3327
+* `["pipeline"]` and 2 `["onboard"]`. Not one camera had two.
 */
-var DetectionSourcesSchema = array(DetectionSourceSchema);
+var DetectionSourcesSchema = preprocess((value) => Array.isArray(value) && value.length > 1 ? value.slice(0, 1) : value, array(DetectionSourceSchema).max(1));
 /**
 * Input shape for `pipeline-runner.reportMotion` cap method. Exported
 * so cap-side consumers (the orchestrator forward, the runner addon's

package/dist/embedding-encoder/index.js

@@ -2,7 +2,7 @@ Object.defineProperties(exports, {
 	__esModule: { value: true },
 	[Symbol.toStringTag]: { value: "Module" }
 });
-const require_dist = require("../dist-DmB50uQ-.js");
+const require_dist = require("../dist-B8eT-EWR.js");
 let node_fs = require("node:fs");
 node_fs = require_dist.__toESM(node_fs);
 let node_path = require("node:path");

package/dist/embedding-encoder/index.mjs

@@ -1,4 +1,4 @@
-import { Et as parseProcStatus, H as PoolMemoryWatchdog, Ht as BaseAddon, Nt as resolvePoolMemoryPolicy, gt as hfModelUrl, ut as embeddingEncoderCapability } from "../dist-KRjxHIQ4.mjs";
+import { Et as parseProcStatus, H as PoolMemoryWatchdog, Ht as BaseAddon, Nt as resolvePoolMemoryPolicy, gt as hfModelUrl, ut as embeddingEncoderCapability } from "../dist-BgBv6Xzq.mjs";
 import { createRequire } from "node:module";
 import * as fs from "node:fs";
 import * as path$1 from "node:path";

package/dist/pipeline-analytics/{_virtual_mf-localSharedImportMap___mfe_internal__addon_pipeline_analytics_widgets-DaT9RhCO.mjs → _virtual_mf-localSharedImportMap___mfe_internal__addon_pipeline_analytics_widgets-Blh_nhpg.mjs}

@@ -3,7 +3,7 @@ import "./dist-CYZr2fwk.mjs";
 var e = {
 	"@camstack/sdk": {
 		name: "@camstack/sdk",
-		version: "1.2.106",
+		version: "1.2.108",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_pipeline_analytics_widgets",
@@ -18,7 +18,7 @@ var e = {
 	},
 	"@camstack/types": {
 		name: "@camstack/types",
-		version: "1.2.200",
+		version: "1.2.202",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_pipeline_analytics_widgets",
@@ -33,7 +33,7 @@ var e = {
 	},
 	"@camstack/ui-library": {
 		name: "@camstack/ui-library",
-		version: "1.2.165",
+		version: "1.2.167",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_pipeline_analytics_widgets",

package/dist/pipeline-analytics/{hostInit-B2MVHHLi.mjs → hostInit-C1eQMPM-.mjs}

@@ -36,7 +36,7 @@ async function r() {
 				}
 			},
 			"@camstack/types": {
-				version: "1.2.200",
+				version: "1.2.202",
 				scope: "default",
 				shareConfig: {
 					singleton: !0,
@@ -45,7 +45,7 @@ async function r() {
 				}
 			},
 			"@camstack/sdk": {
-				version: "1.2.106",
+				version: "1.2.108",
 				scope: "default",
 				shareConfig: {
 					singleton: !0,
@@ -81,7 +81,7 @@ async function r() {
 				}
 			},
 			"@camstack/ui-library": {
-				version: "1.2.165",
+				version: "1.2.167",
 				scope: "default",
 				shareConfig: {
 					singleton: !0,