@camstack/addon-pipeline 1.2.628 → 1.2.630

package/dist/{dist-BjySFF52.js → dist-M09KjuSx.js}

@@ -1,5 +1,5 @@
 let node_crypto = require("node:crypto");
-//#region ../types/dist/event-category-DHXxB8t9.mjs
+//#region ../types/dist/event-category-CT-hz5Rb.mjs
 var EventCategory = /* @__PURE__ */ function(EventCategory) {
 	EventCategory["SystemBoot"] = "system.boot";
 	EventCategory["SystemAddonsReady"] = "system.addons-ready";
@@ -325,6 +325,14 @@ var EventCategory = /* @__PURE__ */ function(EventCategory) {
 	/** The recovery edge of {@link PipelineMotionNoisy}: the motion fell back, or a detection arrived. */
 	EventCategory["PipelineMotionCalm"] = "pipeline.motion-calm";
 	/**
+	* A camera's package LLM confirm has failed closed three times in a row
+	* (D931, 2026-10-26). One edge per camera until
+	* {@link PipelinePackageLlmAnswered}.
+	*/
+	EventCategory["PipelinePackageLlmSilent"] = "pipeline.package-llm-silent";
+	/** The recovery edge of {@link PipelinePackageLlmSilent}: a confirm returned yes or no. */
+	EventCategory["PipelinePackageLlmAnswered"] = "pipeline.package-llm-answered";
+	/**
 	* Per-camera pipeline config was mutated by the orchestrator
 	* (a settings change via `setAgentInferenceDevices` /
 	* `setCameraStepToggle` / `setCameraStepSettings`). Orchestrator
@@ -5567,7 +5575,7 @@ var ZodIssueCode = {
 var ZodFirstPartyTypeKind;
 ZodFirstPartyTypeKind || (ZodFirstPartyTypeKind = {});
 //#endregion
-//#region ../types/dist/sleep-CARd6wZF.mjs
+//#region ../types/dist/sleep--jXS9hWo.mjs
 /**
 * The audio chunk plane's byte format, and the ONE expansion from a coded
 * window to float samples (D455).
@@ -8354,6 +8362,53 @@ var READING_QUANTITIES = [
 ];
 var ReadingQuantitySchema = _enum(READING_QUANTITIES);
 new Set(READING_QUANTITIES);
+/**
+* Stored unit symbol for a quantity. `none` means the number is dimensionless
+* (or an index / ratio / count). `device` means the cap has no single unit.
+*/
+var QUANTITY_BASE = {
+	temperature: "°C",
+	pressure: "hPa",
+	speed: "m/s",
+	precipitation: "mm",
+	"precipitation-rate": "mm/h",
+	length: "m",
+	area: "m²",
+	illuminance: "lx",
+	irradiance: "W/m²",
+	power: "W",
+	energy: "kWh",
+	voltage: "V",
+	current: "A",
+	"apparent-power": "VA",
+	humidity: "%",
+	percentage: "%",
+	"concentration-volume": "ppm",
+	"concentration-mass": "µg/m³",
+	"concentration-ppb": "ppb",
+	volume: "L",
+	duration: "s",
+	"duration-ms": "ms",
+	information: "B",
+	"sound-level": "dBFS",
+	"signal-level": "dBm",
+	"colour-temperature": "mired",
+	angle: "°",
+	bitrate: "kbps",
+	rate: "fps",
+	mass: "kg",
+	index: "none",
+	ratio: "none",
+	count: "none",
+	none: "none",
+	device: "device"
+};
+/** The stored unit, or `undefined` when the quantity has no unit symbol. */
+function baseUnitOf(quantity) {
+	const symbol = QUANTITY_BASE[quantity];
+	if (symbol === "none" || symbol === "device") return void 0;
+	return symbol;
+}
 function readingMeta(quantity, extras) {
 	return {
 		quantity,
@@ -9052,6 +9107,9 @@ var CAP_NAMES = Object.freeze([
 	"filesystem-browse",
 	"flood",
 	"gas",
+	"group-active",
+	"group-commands",
+	"group-status",
 	"heating-valve",
 	"humidifier",
 	"humidity-sensor",
@@ -9072,6 +9130,7 @@ var CAP_NAMES = Object.freeze([
 	"login-method",
 	"media-player",
 	"mesh-network",
+	"meter",
 	"metrics-provider",
 	"model-convert",
 	"model-distributor",
@@ -9870,6 +9929,24 @@ Object.freeze({
 		"path": "detected",
 		"valueType": "boolean"
 	}],
+	"group-active": [{
+		"path": "active",
+		"valueType": "boolean"
+	}],
+	"group-status": [
+		{
+			"path": "included",
+			"valueType": "number"
+		},
+		{
+			"path": "excluded",
+			"valueType": "number"
+		},
+		{
+			"path": "total",
+			"valueType": "number"
+		}
+	],
 	"heating-valve": [{
 		"path": "position",
 		"valueType": "number"
@@ -10115,6 +10192,10 @@ Object.freeze({
 			]
 		}
 	],
+	"meter": [{
+		"path": "value",
+		"valueType": "number"
+	}],
 	"motion": [
 		{
 			"path": "detected",
@@ -11010,7 +11091,7 @@ function sleep(ms) {
 	return new Promise((resolve) => setTimeout(resolve, Math.max(0, ms)));
 }
 //#endregion
-//#region ../types/dist/err-msg-BXKzRBwg.mjs
+//#region ../types/dist/err-msg-DIorGYeC.mjs
 var DeviceType = /* @__PURE__ */ function(DeviceType) {
 	DeviceType["Camera"] = "camera";
 	DeviceType["Hub"] = "hub";
@@ -11104,8 +11185,14 @@ var DeviceType = /* @__PURE__ */ function(DeviceType) {
 	DeviceType["PetFeeder"] = "pet-feeder";
 	/** Built-in dishwasher — program lifecycle, door / remote-start gates,
 	*  salt and rinse-aid levels. Installed with the `dishwasher` cap.
-	*  Sources: native Bosch Home Connect, reusable by similar integrations. */
+	*  Sources: native Bosch Home Connect, reusable by similar integrations.
+	*  A plug-built dishwasher carries running-state and power instead. */
 	DeviceType["Dishwasher"] = "dishwasher";
+	/** Washing machine. A plug-built one is running while its power stays
+	*  above a threshold. No program cap — that surface is the dishwasher's. */
+	DeviceType["Washer"] = "washer";
+	/** Tumble dryer. Same plug-built running surface as {@link Washer}. */
+	DeviceType["Dryer"] = "dryer";
 	return DeviceType;
 }({});
 var DeviceFeature = /* @__PURE__ */ function(DeviceFeature) {
@@ -11363,7 +11450,7 @@ function errMsg(err) {
 	return String(err);
 }
 //#endregion
-//#region ../types/dist/composition-kEl9mevu.mjs
+//#region ../types/dist/composition-Bb8iwHEJ.mjs
 var AUDIO_ENCODER_BY_CODEC = {
 	opus: "libopus",
 	aac: "aac",
@@ -12514,6 +12601,13 @@ var table = {
 		apply: () => {
 			throw new ExpressionEvalError("latchedAt: stateful evaluation context is required");
 		}
+	},
+	schmitt: {
+		minArgs: 3,
+		maxArgs: 5,
+		apply: () => {
+			throw new ExpressionEvalError("schmitt: stateful evaluation context is required");
+		}
 	}
 };
 Object.freeze(Object.assign(Object.create(null), table));
@@ -12954,15 +13048,232 @@ function validateExpressionSource(src) {
 	}
 	return null;
 }
-/** A composed device's stableId is this prefix plus the block id. */
-var COMPOSED_DEVICE_STABLE_ID_PREFIX = "composed-";
-/** Longest snippet a `code` source may carry (slice 4). */
-var MAX_COMPOSITION_CODE_LENGTH = 2e4;
+/**
+* One power reading becomes a washer, dryer or dishwasher (D944 helper).
+*
+* Standby of the control board is under 5 W; a motor or a heater is far
+* above that, so 5 W is the line. A door lock or a short pump spike is not
+* a cycle, so running starts only after 30 s above the line.
+*
+* A wash, dry or dishwasher pause (soak, heat-wait, heater off between
+* bursts) lasts several minutes. Ending the cycle on the first dip would
+* report "finished" in the middle of the program, so the stop dwell is
+* 10 minutes on every type. The number is stored per type so one machine
+* can move later without moving the others.
+*/
+var APPLIANCE_TEMPLATE_ID = "appliance";
+var APPLIANCE_KINDS = [
+	"washer",
+	"dryer",
+	"dishwasher"
+];
+DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher;
+/**
+* Statistics and integrals over a history read (D944).
+*
+* Pure: the same points always give the same answer, so a restart recomputes
+* rather than trusting a buffer. A gauge mean is time-weighted (value × ms),
+* never the mean of the samples. A hole with no held value is not integrated
+* as zero. A truncated read is not published.
+*/
+var STATISTIC_STATS = [
+	"min",
+	"max",
+	"mean",
+	"sum",
+	"count",
+	"change"
+];
+/**
+* The range a statistics or integral helper asks history for (D944).
+*
+* Calendar edges are the hub's timezone, never UTC midnight: a day is 23, 24
+* or 25 hours across a DST change. A tier is eligible only when its retention
+* is strictly longer than the longest that range can be. Forever qualifies.
+* Equal to a tier's retention is a refusal, not a short answer.
+*/
+var MINUTE_MS = 6e4;
+var HOUR_MS = 60 * MINUTE_MS;
+var DAY_MS = 24 * HOUR_MS;
+var ROLLING_SPANS = [
+	"1h",
+	"24h",
+	"2d",
+	"7d",
+	"30d",
+	"custom"
+];
+var CALENDAR_PERIODS = [
+	"today",
+	"yesterday",
+	"this-week",
+	"this-month"
+];
+var RESET_PERIODS = [
+	"never",
+	"daily",
+	"weekly",
+	"monthly"
+];
+5 * MINUTE_MS;
+24 * HOUR_MS, 2 * DAY_MS, 7 * DAY_MS, 30 * DAY_MS;
+7 * DAY_MS, 30 * DAY_MS, 365 * DAY_MS;
+var rollingWindowObject = object({
+	kind: literal("rolling"),
+	span: _enum(ROLLING_SPANS),
+	customMinutes: number().int().min(5).optional()
+}).check((payload) => {
+	if (payload.value.span === "custom" && payload.value.customMinutes === void 0) payload.issues.push({
+		code: "custom",
+		message: "a custom range needs a duration in minutes",
+		path: ["customMinutes"],
+		input: payload.value
+	});
+	if (payload.value.span !== "custom" && payload.value.customMinutes !== void 0) payload.issues.push({
+		code: "custom",
+		message: "only a custom range carries a duration",
+		path: ["customMinutes"],
+		input: payload.value
+	});
+});
+var RollingWindowSchema = rollingWindowObject;
+var StatisticWindowSchema = discriminatedUnion("kind", [rollingWindowObject, object({
+	kind: literal("calendar"),
+	period: _enum(CALENDAR_PERIODS)
+})]);
+/**
+* A composition source identity: `(addonId, stableId)`, never a numeric device
+* id. Split out so helper schemas can name it without a cycle through
+* `composition.ts` (D659).
+*/
 var CompositionSourceRefSchema = object({
 	/** The owning addon; `stableId` is unique only within it. */
 	addonId: string().min(1),
 	stableId: string().min(1)
 });
+var GROUP_TEMPLATE_IDS = [
+	"temperature",
+	"humidity",
+	"pressure",
+	"illuminance",
+	"power",
+	"energy",
+	"battery",
+	"numeric",
+	"motion",
+	"contact",
+	"leak",
+	"smoke",
+	"occupancy",
+	"binary",
+	"switch",
+	"light",
+	"fan",
+	"cover",
+	"valve",
+	"lock",
+	"media-player",
+	"climate"
+];
+var NUMERIC_AGGREGATES = [
+	"mean",
+	"median",
+	"min",
+	"max",
+	"sum"
+];
+var BINARY_AGGREGATES = ["any", "all"];
+/** How an actuator group decides it is on. Unknown members never count as off. */
+var ACTIVE_CRITERIA = ["at-least-one", "all"];
+var AGGREGATE_REDUCERS = [
+	"mean",
+	"median",
+	"min",
+	"max",
+	"sum",
+	"any",
+	"all"
+];
+var GroupTemplateIdSchema = _enum(GROUP_TEMPLATE_IDS);
+var AggregateReducerSchema = _enum(AGGREGATE_REDUCERS);
+var ActiveCriterionSchema = _enum(ACTIVE_CRITERIA);
+/** One member. The field is stored so occupancy can name motion or binary. */
+var HelperMemberSchema = object({
+	source: CompositionSourceRefSchema,
+	cap: string().min(1),
+	fieldPath: string().min(1)
+});
+var HelperSpecSchema = discriminatedUnion("kind", [
+	object({
+		kind: literal("group"),
+		templateId: GroupTemplateIdSchema,
+		aggregate: AggregateReducerSchema,
+		members: array(HelperMemberSchema).min(1).max(64),
+		/** Actuator groups only. Readings leave this unset. */
+		active: ActiveCriterionSchema.optional()
+	}),
+	object({
+		kind: literal("appliance"),
+		templateId: literal(APPLIANCE_TEMPLATE_ID),
+		appliance: _enum(APPLIANCE_KINDS),
+		thresholdWatts: number().positive(),
+		startDwellMs: number().int().nonnegative(),
+		stopDwellMs: number().int().nonnegative(),
+		member: HelperMemberSchema
+	}),
+	object({
+		kind: literal("statistic"),
+		stat: _enum(STATISTIC_STATS),
+		window: StatisticWindowSchema,
+		source: HelperMemberSchema
+	}),
+	object({
+		kind: literal("integral"),
+		reset: _enum(RESET_PERIODS),
+		output: _enum(["energy", "meter"]),
+		source: HelperMemberSchema
+	}),
+	object({
+		kind: literal("threshold"),
+		source: HelperMemberSchema,
+		high: number(),
+		low: number(),
+		onForMs: number().int().nonnegative(),
+		offForMs: number().int().nonnegative()
+	}),
+	object({
+		kind: literal("arithmetic"),
+		op: _enum([
+			"sum",
+			"difference",
+			"ratio"
+		]),
+		inputs: array(HelperMemberSchema).min(2).max(64)
+	}),
+	object({
+		kind: literal("expression"),
+		expr: string().min(1),
+		inputs: array(object({
+			name: string().min(1),
+			member: HelperMemberSchema
+		})).min(1).max(64),
+		output: _enum(["number", "boolean"])
+	}),
+	object({
+		kind: literal("derivative"),
+		window: RollingWindowSchema,
+		per: _enum([
+			"second",
+			"minute",
+			"hour"
+		]),
+		source: HelperMemberSchema
+	})
+]);
+/** A composed device's stableId is this prefix plus the block id. */
+var COMPOSED_DEVICE_STABLE_ID_PREFIX = "composed-";
+/** Longest snippet a `code` source may carry (slice 4). */
+var MAX_COMPOSITION_CODE_LENGTH = 2e4;
 /** One field of one capability of one source device. */
 var CompositionFieldReadSchema = object({
 	source: CompositionSourceRefSchema,
@@ -13006,7 +13317,59 @@ var CompositionCodeSourceSchema = object({
 var CompositionFieldSourceSchema = discriminatedUnion("kind", [
 	CompositionFromSourceSchema,
 	CompositionExpressionSourceSchema,
-	CompositionCodeSourceSchema
+	CompositionCodeSourceSchema,
+	object({
+		kind: literal("aggregate"),
+		reducer: _enum([
+			"mean",
+			"median",
+			"min",
+			"max",
+			"sum",
+			"any",
+			"all"
+		]),
+		reads: array(CompositionFieldReadSchema).min(1).max(64),
+		/**
+		* Set when the reads are an enum state, not a yes/no: the listed states
+		* count as active (a cover is `open`). A state outside the list is inactive;
+		* a read that is not a state at all is left out. Only `any` / `all` use it.
+		*/
+		activeWhen: array(string().min(1)).min(1).optional(),
+		/** `value` is the reading; the others are the member counts. */
+		publish: _enum([
+			"value",
+			"included",
+			"excluded",
+			"total"
+		]),
+		/** What a `value` publish does when nobody is included. Counts ignore this. */
+		empty: _enum([
+			"null",
+			"omit",
+			"offline"
+		])
+	}),
+	object({
+		kind: literal("series"),
+		read: CompositionFieldReadSchema,
+		/** `value` is the statistic or the integral. The others are the gap counts. */
+		publish: _enum([
+			"value",
+			"included",
+			"excluded",
+			"total"
+		]),
+		/**
+		* What an unanswered `value` does. Counts ignore this. `offline` leaves the
+		* device unseeded until history answers, so a restart cannot publish 0.
+		*/
+		empty: _enum([
+			"null",
+			"omit",
+			"offline"
+		])
+	})
 ]);
 var CompositionCommandTargetSchema = discriminatedUnion("kind", [object({
 	kind: literal("forward"),
@@ -13052,7 +13415,13 @@ var CompositionSchema = object({
 		kind: literal("existing"),
 		device: CompositionSourceRefSchema
 	})]),
-	features: array(CompositionFeatureSchema).min(1).max(16)
+	features: array(CompositionFeatureSchema).min(1).max(16),
+	/**
+	* Present when the block is a helper template. Absent on a free
+	* composition (the room example, device 4603). The editor reads this,
+	* never the compiled features.
+	*/
+	helper: HelperSpecSchema.optional()
 }).superRefine((composition, ctx) => {
 	const seen = /* @__PURE__ */ new Set();
 	composition.features.forEach((feature, index) => {
@@ -20983,7 +21352,11 @@ var CompositionProblemSchema = object({
 		"target-missing",
 		"target-unreadable",
 		"not-replaceable",
-		"native-capability-replace"
+		"native-capability-replace",
+		"mixed-quantity",
+		"helper-mismatch",
+		"member-constraint",
+		"retention"
 	]),
 	path: string(),
 	message: string()
@@ -21004,7 +21377,8 @@ var CompositionUnavailableModeSchema = _enum([
 	"null",
 	"offline",
 	"unknown",
-	"release"
+	"release",
+	"omit"
 ]);
 /**
 * `derived` reads a source · `clock` reads only `now`, recomputed when a sibling
@@ -21216,8 +21590,392 @@ Object.freeze({
 	latchedAt: {
 		kind: "fixed",
 		result: ["number", "null"]
+	},
+	schmitt: {
+		kind: "fixed",
+		result: ["boolean", "null"]
 	}
 });
+/**
+* One catalog row per base reading a group helper can build (D944 §3).
+* Data, not a form default written into the block.
+*/
+var NOW$2 = {
+	fieldPath: "lastFetchedAt",
+	expr: "now"
+};
+var CHANGED = {
+	fieldPath: "lastChangedAt",
+	expr: "now"
+};
+function numeric(input) {
+	return {
+		...input,
+		family: "numeric",
+		deviceType: DeviceType.Sensor,
+		memberDeviceType: DeviceType.Sensor,
+		memberDeviceTypes: [DeviceType.Sensor],
+		activeWhen: void 0,
+		commandCaps: [],
+		baseUnit: baseUnitOf(input.quantity),
+		aggregates: NUMERIC_AGGREGATES,
+		accept: [{
+			cap: input.outputCap,
+			fieldPath: input.outputField
+		}]
+	};
+}
+function binary(input) {
+	return {
+		...input,
+		family: "binary",
+		deviceType: DeviceType.Sensor,
+		memberDeviceType: DeviceType.Sensor,
+		memberDeviceTypes: [DeviceType.Sensor],
+		activeWhen: void 0,
+		commandCaps: [],
+		quantity: "none",
+		baseUnit: void 0,
+		aggregates: BINARY_AGGREGATES,
+		empty: "offline"
+	};
+}
+var GROUP_TEMPLATES = [
+	numeric({
+		id: "temperature",
+		summary: "Mean, median, min, max or sum of temperatures. Offline and unknown members are left out, never read as 0 °C.",
+		role: DeviceRole.TemperatureSensor,
+		outputCap: "temperature-sensor",
+		outputField: "celsius",
+		quantity: "temperature",
+		defaultAggregate: "mean",
+		empty: "null",
+		companions: [NOW$2]
+	}),
+	numeric({
+		id: "humidity",
+		summary: "Humidity in percent. Offline and unknown members are left out, never read as 0 %.",
+		role: DeviceRole.HumiditySensor,
+		outputCap: "humidity-sensor",
+		outputField: "percent",
+		quantity: "humidity",
+		defaultAggregate: "mean",
+		empty: "null",
+		companions: [NOW$2]
+	}),
+	numeric({
+		id: "pressure",
+		summary: "Pressure in hectopascals. Offline and unknown members are left out, never read as 0 hPa.",
+		role: DeviceRole.PressureSensor,
+		outputCap: "pressure-sensor",
+		outputField: "hpa",
+		quantity: "pressure",
+		defaultAggregate: "mean",
+		empty: "null",
+		companions: [NOW$2]
+	}),
+	numeric({
+		id: "illuminance",
+		summary: "Illuminance in lux. Offline and unknown members are left out, never read as 0 lx.",
+		role: DeviceRole.AmbientLightSensor,
+		outputCap: "ambient-light-sensor",
+		outputField: "lux",
+		quantity: "illuminance",
+		defaultAggregate: "mean",
+		empty: "null",
+		companions: [NOW$2]
+	}),
+	numeric({
+		id: "power",
+		summary: "Power in watts, summed by default. Nobody reporting omits the key rather than writing 0 W.",
+		role: DeviceRole.PowerSensor,
+		outputCap: "power-meter",
+		outputField: "watts",
+		quantity: "power",
+		defaultAggregate: "sum",
+		empty: "omit",
+		companions: [NOW$2]
+	}),
+	numeric({
+		id: "energy",
+		summary: "Energy in kilowatt-hours, summed by default. Nobody reporting omits the key rather than writing 0 kWh.",
+		role: DeviceRole.EnergySensor,
+		outputCap: "power-meter",
+		outputField: "kwhTotal",
+		quantity: "energy",
+		defaultAggregate: "sum",
+		empty: "omit",
+		companions: [NOW$2]
+	}),
+	numeric({
+		id: "battery",
+		summary: "Battery charge in percent. Offline and unknown members are left out, never read as 0 %.",
+		role: DeviceRole.BatterySensor,
+		outputCap: "battery",
+		outputField: "percentage",
+		quantity: "percentage",
+		defaultAggregate: "mean",
+		empty: "null",
+		companions: [
+			{
+				fieldPath: "charging",
+				expr: "\"unknown\""
+			},
+			{
+				fieldPath: "sleeping",
+				expr: "false"
+			},
+			{
+				fieldPath: "lastUpdated",
+				expr: "now"
+			}
+		]
+	}),
+	numeric({
+		id: "numeric",
+		summary: "A numeric reading in the members’ shared quantity. Mixed quantities are refused. Nobody reporting publishes null, not 0.",
+		role: DeviceRole.NumericSensor,
+		outputCap: "numeric-sensor",
+		outputField: "value",
+		quantity: "device",
+		defaultAggregate: "mean",
+		empty: "null",
+		companions: [NOW$2]
+	}),
+	binary({
+		id: "motion",
+		summary: "Any or all motion. Offline and unknown members are left out, never read as off. Nobody reporting takes the device offline.",
+		role: DeviceRole.MotionSensor,
+		outputCap: "motion",
+		outputField: "detected",
+		defaultAggregate: "any",
+		accept: [{
+			cap: "motion",
+			fieldPath: "detected"
+		}],
+		companions: [{
+			fieldPath: "lastDetectedAt",
+			expr: "null"
+		}, {
+			fieldPath: "autoClearAfterMs",
+			expr: "null"
+		}]
+	}),
+	binary({
+		id: "contact",
+		summary: "Any or all open contacts. Offline and unknown members are left out, never read as closed.",
+		role: DeviceRole.ContactSensor,
+		outputCap: "contact",
+		outputField: "entryOpen",
+		defaultAggregate: "any",
+		accept: [{
+			cap: "contact",
+			fieldPath: "entryOpen"
+		}],
+		companions: [CHANGED]
+	}),
+	binary({
+		id: "leak",
+		summary: "Any or all leak detections. Offline and unknown members are left out, never read as dry.",
+		role: DeviceRole.LeakSensor,
+		outputCap: "flood",
+		outputField: "flooded",
+		defaultAggregate: "any",
+		accept: [{
+			cap: "flood",
+			fieldPath: "flooded"
+		}],
+		companions: [CHANGED]
+	}),
+	binary({
+		id: "smoke",
+		summary: "Any or all smoke detections. Offline and unknown members are left out, never read as clear.",
+		role: DeviceRole.SmokeSensor,
+		outputCap: "smoke",
+		outputField: "detected",
+		defaultAggregate: "any",
+		accept: [{
+			cap: "smoke",
+			fieldPath: "detected"
+		}],
+		companions: [CHANGED]
+	}),
+	binary({
+		id: "occupancy",
+		summary: "Any or all of motion or binary sensors, published as a binary. Presence zones are not aggregated. Nobody reporting is offline, not off.",
+		role: DeviceRole.BinarySensor,
+		outputCap: "binary",
+		outputField: "on",
+		defaultAggregate: "any",
+		accept: [{
+			cap: "motion",
+			fieldPath: "detected"
+		}, {
+			cap: "binary",
+			fieldPath: "on"
+		}],
+		companions: [CHANGED]
+	}),
+	binary({
+		id: "binary",
+		summary: "Any or all generic binary sensors. Offline and unknown members are left out, never read as off.",
+		role: DeviceRole.BinarySensor,
+		outputCap: "binary",
+		outputField: "on",
+		defaultAggregate: "any",
+		accept: [{
+			cap: "binary",
+			fieldPath: "on"
+		}],
+		companions: [CHANGED]
+	}),
+	actuator({
+		id: "switch",
+		summary: "On when at least one switch is on, or when all of them are. Offline and unknown members are left out of that decision, never read as off, and still receive the command.",
+		deviceType: DeviceType.Switch,
+		outputCap: "switch",
+		outputField: "on",
+		member: {
+			cap: "switch",
+			fieldPath: "on"
+		},
+		commandCaps: ["switch"]
+	}),
+	actuator({
+		id: "light",
+		summary: "On when at least one light is on, or when all of them are. Brightness and colour are offered only when every member has them. A command is not sent to a member that lacks it.",
+		deviceType: DeviceType.Light,
+		outputCap: "switch",
+		outputField: "on",
+		member: {
+			cap: "switch",
+			fieldPath: "on"
+		},
+		commandCaps: [
+			"switch",
+			"brightness",
+			"color"
+		]
+	}),
+	actuator({
+		id: "fan",
+		summary: "On when at least one fan is on, or when all of them are. Speed, preset, direction and oscillation are offered only when every fan has them. A command is not sent to a fan that lacks it.",
+		deviceType: DeviceType.Fan,
+		outputCap: "switch",
+		outputField: "on",
+		member: {
+			cap: "switch",
+			fieldPath: "on"
+		},
+		commandCaps: ["switch", "fan-control"]
+	}),
+	actuator({
+		id: "cover",
+		summary: "Open when at least one cover is open or part-open, or only when all of them are. Position and tilt are offered only when every cover has them. A cover that reports nothing is left out, never read as closed.",
+		deviceType: DeviceType.Cover,
+		outputCap: "group-active",
+		outputField: "active",
+		member: {
+			cap: "cover",
+			fieldPath: "state"
+		},
+		activeWhen: [
+			"open",
+			"opening",
+			"stopped"
+		],
+		commandCaps: ["cover"]
+	}),
+	actuator({
+		id: "valve",
+		summary: "Open when at least one valve is open or part-open, or only when all of them are. Position is offered only when every valve has it. A valve that reports nothing is left out, never read as closed.",
+		deviceType: DeviceType.Valve,
+		outputCap: "group-active",
+		outputField: "active",
+		member: {
+			cap: "valve",
+			fieldPath: "state"
+		},
+		activeWhen: [
+			"open",
+			"opening",
+			"stopped"
+		],
+		commandCaps: ["valve"]
+	}),
+	actuator({
+		id: "lock",
+		summary: "Locked when at least one lock is locked, or only when all of them are. A jammed or moving lock is not locked. Locking is one tap; unlocking the group needs a confirmation every time, and nothing is sent without it.",
+		deviceType: DeviceType.Lock,
+		outputCap: "group-active",
+		outputField: "active",
+		member: {
+			cap: "lock-control",
+			fieldPath: "state"
+		},
+		activeWhen: ["locked"],
+		commandCaps: ["lock-control"]
+	}),
+	actuator({
+		id: "media-player",
+		summary: "Playing when at least one player is playing, or only when all of them are. Volume is offered only when every player has it. A player that reports nothing is left out, never read as stopped.",
+		deviceType: DeviceType.MediaPlayer,
+		outputCap: "group-active",
+		outputField: "active",
+		member: {
+			cap: "media-player",
+			fieldPath: "state"
+		},
+		activeWhen: ["playing", "buffering"],
+		commandCaps: ["media-player"]
+	}),
+	actuator({
+		id: "climate",
+		summary: "Running when at least one thermostat or air conditioner is not off, or only when all of them are. Target temperature and fan are offered only when every device has them. A device that reports nothing is left out, never read as off.",
+		deviceType: DeviceType.Thermostat,
+		memberDeviceTypes: [DeviceType.Thermostat, DeviceType.Climate],
+		outputCap: "group-active",
+		outputField: "active",
+		member: {
+			cap: "climate-control",
+			fieldPath: "mode"
+		},
+		activeWhen: [
+			"heat",
+			"cool",
+			"auto",
+			"heat_cool",
+			"fan_only",
+			"dry"
+		],
+		commandCaps: ["climate-control"]
+	})
+];
+function actuator(input) {
+	return {
+		id: input.id,
+		summary: input.summary,
+		deviceType: input.deviceType,
+		outputCap: input.outputCap,
+		outputField: input.outputField,
+		commandCaps: input.commandCaps,
+		family: "actuator",
+		role: void 0,
+		memberDeviceType: input.deviceType,
+		memberDeviceTypes: input.memberDeviceTypes ?? [input.deviceType],
+		activeWhen: input.activeWhen,
+		quantity: "none",
+		baseUnit: void 0,
+		aggregates: BINARY_AGGREGATES,
+		defaultAggregate: "any",
+		empty: "offline",
+		accept: [input.member],
+		companions: [CHANGED]
+	};
+}
+new Map(GROUP_TEMPLATES.map((template) => [template.id, template]));
+DeviceFeature.LightColorRgb, DeviceFeature.LightColorHsv, DeviceFeature.LightColorMired;
+DeviceType.Camera;
 `${COMPOSED_DEVICE_STABLE_ID_PREFIX}`;
 /**
 * What a composition may BUILD on a device type (G2, D676): the caps a new
@@ -48229,6 +48987,8 @@ var NcSystemEventKindSchema = _enum([
 	"detection-blind",
 	"motion-noisy",
 	"motion-calm",
+	"package-llm-silent",
+	"package-llm-answered",
 	"recording-stalled",
 	"recording-healthy",
 	"recording-degraded",
@@ -49318,7 +50078,20 @@ var NcRuleInputSchema = object({
 	* save by the hub's grouping guard). `.optional()`, never `.default()`: the addon cap
 	* path does not run Zod defaults.
 	*/
-	groupingSec: number().int().min(5).max(60).optional()
+	groupingSec: number().int().min(5).max(60).optional(),
+	/**
+	* ASK ME TO CONFIRM DETECTIONS (#243): a DETECTION notification of this rule
+	* carries "Correct" / "Wrong" buttons (and, where the channel has room, a
+	* "Wrong, it is a <class>" choice). A tap marks the track for retraining, the
+	* same mark the Library writes, and records whose notification it was and
+	* when. A channel with no buttons gets the same two choices as links.
+	*
+	* `.optional()`, never `.default()` (a Zod default does not run on the addon
+	* cap path): absent and `false` both mean off, which is what every rule
+	* authored before this field meant. An editor turns it off by writing
+	* `false`, so it needs no `clear` key.
+	*/
+	askVerdict: boolean().optional()
 });
 /**
 * Partial patch for `updateRule` — any subset of the input fields, plus the
@@ -60083,6 +60856,28 @@ var PackageVersionInfoSchema = object({
 	deprecated: string().optional(),
 	distTags: array(string()).readonly()
 });
+/**
+* One published document. `ok` is markdown from the registry. `missing` means
+* the registry answered and the file was not there. `error` is a registry or
+* tarball failure — never an empty string standing in for either.
+*/
+var PackageDocBodySchema = discriminatedUnion("status", [
+	object({
+		status: literal("ok"),
+		markdown: string()
+	}),
+	object({ status: literal("missing") }),
+	object({
+		status: literal("error"),
+		message: string()
+	})
+]);
+var PackageDocsSchema = object({
+	name: string(),
+	version: string(),
+	readme: PackageDocBodySchema,
+	changelog: PackageDocBodySchema
+});
 var SearchResultSchema = object({
 	name: string(),
 	version: string(),
@@ -60301,7 +61096,10 @@ method(object({ nodeId: string().optional() }).optional(), array(AddonListItemSc
 }), object({ success: literal(true) }), {
 	kind: "mutation",
 	auth: "admin"
-}), method(object({ name: string() }), array(PackageVersionInfoSchema).readonly()), method(object({ addonId: string() }), RestartAddonResultSchema, {
+}), method(object({ name: string() }), array(PackageVersionInfoSchema).readonly()), method(object({
+	name: string().min(1),
+	version: string().min(1).optional()
+}), PackageDocsSchema, { auth: "admin" }), method(object({ addonId: string() }), RestartAddonResultSchema, {
 	kind: "mutation",
 	auth: "admin"
 }), method(object({ packageName: string() }), object({ success: literal(true) }), {
@@ -62467,6 +63265,42 @@ object({
 	lastChangedAt: number()
 });
 DeviceType.Sensor;
+object({ 
+/** One row per member that has been commanded. A later command replaces that member's row. */
+results: array(object({
+	deviceId: number().int().nonnegative(),
+	cap: string().min(1),
+	method: string().min(1),
+	ok: boolean(),
+	error: string().optional(),
+	/** Ms epoch of the attempt. */
+	at: number()
+})) });
+DeviceType.Switch, DeviceType.Light, DeviceType.Fan, DeviceType.Cover, DeviceType.Valve, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.Thermostat, DeviceType.Climate;
+object({
+	active: boolean().meta({ label: "Active" }),
+	/** Ms epoch when the slice was last updated. */
+	lastChangedAt: number()
+});
+DeviceType.Cover, DeviceType.Valve, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.Climate, DeviceType.Thermostat;
+object({
+	/** Members whose current value entered the aggregate. */
+	included: number().int().nonnegative().meta(readingMeta("count", {
+		precision: 0,
+		label: "Reporting"
+	})),
+	/** Members left out: offline, unknown, or not a finite reading (D393). */
+	excluded: number().int().nonnegative().meta(readingMeta("count", {
+		precision: 0,
+		label: "Excluded"
+	})),
+	/** `included` + `excluded`. */
+	total: number().int().nonnegative().meta(readingMeta("count", {
+		precision: 0,
+		label: "Members"
+	}))
+});
+DeviceType.Sensor, DeviceType.Switch, DeviceType.Light, DeviceType.Fan, DeviceType.Cover, DeviceType.Valve, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.Thermostat, DeviceType.Climate;
 object({
 	/** Radiator valve opening 0 (closed) .. 100 (open). Null = not yet known. */
 	position: number().min(0).max(100).nullable().meta(readingMeta("percentage")),
@@ -63373,7 +64207,14 @@ DeviceType.Lock, method(object({
 	auth: "protected"
 }), method(object({
 	deviceId: number().int().nonnegative(),
-	code: string().min(1).optional()
+	code: string().min(1).optional(),
+	/**
+	* Honoured by a helper lock GROUP only (D944): unlocking several doors
+	* with one call is refused unless the caller says it was confirmed. A
+	* single lock ignores it. The refusal lives in the callee, so no
+	* automation or API caller reaches the doors by skipping a dialog.
+	*/
+	confirm: boolean().optional()
 }), _void(), {
 	kind: "mutation",
 	auth: "protected"
@@ -63381,6 +64222,11 @@ DeviceType.Lock, method(object({
 	kind: "mutation",
 	auth: "protected"
 });
+object({
+	value: number().nullable().meta(readingMeta("device", { label: "Total" })),
+	lastFetchedAt: number()
+});
+DeviceType.Sensor;
 /**
 * Media-player cap. Models HA `media_player.*` (Sonos, Chromecast,
 * Apple TV, Spotify, Roku, generic OTT receivers, …) on
@@ -65298,7 +66144,7 @@ object({
 	/** Ms epoch when the slice was last updated. */
 	lastFetchedAt: number()
 });
-DeviceType.Sensor;
+DeviceType.Sensor, DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher;
 /**
 * Presence cap. Models HA `person.*` and `device_tracker.*` entities
 * on `DeviceType.Presence`. Read-only — no setters: presence is
@@ -65745,7 +66591,7 @@ object({
 	phase: string().nullable()
 });
 Object.values(DeviceType);
-DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
+DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
 DeviceType.Camera, DeviceType.Sensor, DeviceType.Switch, method(object({ deviceId: number().int().nonnegative() }), object({ success: literal(true) }), {
 	kind: "mutation",
 	auth: "admin"
@@ -68308,7 +69154,7 @@ object({
 	/** Ms epoch of the last state change. Useful for UI "X minutes ago". */
 	lastChangedAt: number()
 });
-DeviceType.Switch, DeviceType.Siren, DeviceType.Light, method(object({
+DeviceType.Switch, DeviceType.Siren, DeviceType.Light, DeviceType.Fan, method(object({
 	deviceId: number(),
 	on: boolean()
 }), _void(), {
@@ -70040,8 +70886,9 @@ function dominantClipLabels(events) {
 	}
 	return [...counts.entries()].toSorted((x, y) => y[1] - x[1]).slice(0, 3).map(([name]) => name);
 }
+DeviceFeature.FanSpeed, DeviceFeature.FanPreset, DeviceFeature.FanDirection, DeviceFeature.FanOscillating, DeviceFeature.CoverPositionable, DeviceFeature.CoverTilt, DeviceFeature.ValvePositionable, DeviceFeature.MediaPlayerVolume, DeviceFeature.ClimateFanMode;
 SOURCE_CAPS.filter((cap) => cap !== "switch" && cap !== "motion");
-DeviceType.Camera, DeviceType.Sensor, DeviceType.Button, DeviceType.Switch, DeviceType.PetFeeder, DeviceType.Container, DeviceType.Thermostat, DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Camera, DeviceType.Camera, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
+DeviceType.Camera, DeviceType.Sensor, DeviceType.Button, DeviceType.Switch, DeviceType.PetFeeder, DeviceType.Container, DeviceType.Thermostat, DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer, DeviceType.Camera, DeviceType.Camera, DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.MediaPlayer, DeviceType.WaterHeater, DeviceType.Humidifier, DeviceType.Fan, DeviceType.Climate, DeviceType.Thermostat, DeviceType.PetFeeder;
 String.raw`rose\(active(\d+), changed(\d+), (\d+(?:\.\d+)?)\)`;
 DeviceRole.BinarySensor, DeviceRole.MotionSensor;
 new Set(CAP_NAMES);
@@ -70112,7 +70959,7 @@ function deriveBatteryPresence(input) {
 	const budget = input.unreachableAfterMs ?? 216e5;
 	return input.nowMs - lastContactAt > budget ? "unreachable" : "sleeping";
 }
-DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Camera, DeviceType.Hub, DeviceType.Switch, DeviceType.Siren, DeviceType.Light, DeviceType.Fan, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher;
+DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Camera, DeviceType.Hub, DeviceType.Switch, DeviceType.Siren, DeviceType.Light, DeviceType.Fan, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer;
 new Set(Object.values(DeviceType));
 Object.freeze({
 	"accessories.getStatus": {
@@ -70220,6 +71067,13 @@ Object.freeze({
 		access: "view",
 		role: "admin"
 	},
+	"addons.getPackageDocs": {
+		capName: "addons",
+		capScope: "system",
+		addonId: null,
+		access: "view",
+		role: "admin"
+	},
 	"addons.getVersions": {
 		capName: "addons",
 		capScope: "system",
@@ -73328,6 +74182,27 @@ Object.freeze({
 		access: "view",
 		role: "viewer"
 	},
+	"groupActive.getStatus": {
+		capName: "group-active",
+		capScope: "device",
+		addonId: null,
+		access: "view",
+		role: "viewer"
+	},
+	"groupCommands.getStatus": {
+		capName: "group-commands",
+		capScope: "device",
+		addonId: null,
+		access: "view",
+		role: "viewer"
+	},
+	"groupStatus.getStatus": {
+		capName: "group-status",
+		capScope: "device",
+		addonId: null,
+		access: "view",
+		role: "viewer"
+	},
 	"heatingValve.getStatus": {
 		capName: "heating-valve",
 		capScope: "device",
@@ -74280,6 +75155,13 @@ Object.freeze({
 		access: "create",
 		role: "admin"
 	},
+	"meter.getStatus": {
+		capName: "meter",
+		capScope: "device",
+		addonId: null,
+		access: "view",
+		role: "viewer"
+	},
 	"metricsProvider.collectSnapshot": {
 		capName: "metrics-provider",
 		capScope: "system",
@@ -82378,7 +83260,39 @@ var APPLIANCE_CAP_VOCABULARY = {
 				phrase: t("When {device} finishes", "Quando {device} finisce"),
 				icon: "square"
 			}
-		}
+		},
+		overrides: { byType: {
+			[DeviceType.Washer]: {
+				state: { running: {
+					whenTrue: t("When the washing machine starts", "Quando la lavatrice inizia"),
+					whenFalse: t("When the washing machine has finished", "Quando la lavatrice ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the washing machine starts", "Quando la lavatrice inizia") },
+					onFinished: { phrase: t("When the washing machine has finished", "Quando la lavatrice ha finito") }
+				}
+			},
+			[DeviceType.Dryer]: {
+				state: { running: {
+					whenTrue: t("When the dryer starts", "Quando l'asciugatrice inizia"),
+					whenFalse: t("When the dryer has finished", "Quando l'asciugatrice ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the dryer starts", "Quando l'asciugatrice inizia") },
+					onFinished: { phrase: t("When the dryer has finished", "Quando l'asciugatrice ha finito") }
+				}
+			},
+			[DeviceType.Dishwasher]: {
+				state: { running: {
+					whenTrue: t("When the dishwasher starts", "Quando la lavastoviglie inizia"),
+					whenFalse: t("When the dishwasher has finished", "Quando la lavastoviglie ha finito")
+				} },
+				events: {
+					onStarted: { phrase: t("When the dishwasher starts", "Quando la lavastoviglie inizia") },
+					onFinished: { phrase: t("When the dishwasher has finished", "Quando la lavastoviglie ha finito") }
+				}
+			}
+		} }
 	},
 	update: {
 		scope: "device",
@@ -83150,6 +84064,41 @@ var SENSOR_CAP_VOCABULARY = {
 			icon: "flame"
 		}]
 	},
+	"group-active": {
+		scope: "device",
+		noun: t("Group state", "Stato del gruppo")
+	},
+	"group-commands": {
+		scope: "device",
+		noun: t("Group command", "Comando di gruppo")
+	},
+	"group-status": {
+		scope: "device",
+		noun: t("Group", "Gruppo"),
+		state: [
+			{
+				kind: "numeric",
+				field: "included",
+				quantity: t("the members reporting", "i membri che rispondono"),
+				label: t("Reporting", "Rispondono"),
+				icon: "users"
+			},
+			{
+				kind: "numeric",
+				field: "excluded",
+				quantity: t("the members left out", "i membri esclusi"),
+				label: t("Excluded", "Esclusi"),
+				icon: "users"
+			},
+			{
+				kind: "numeric",
+				field: "total",
+				quantity: t("the member count", "il numero di membri"),
+				label: t("Members", "Membri"),
+				icon: "sigma"
+			}
+		]
+	},
 	"humidity-sensor": {
 		scope: "device",
 		noun: t("Humidity", "Umidità"),
@@ -83175,6 +84124,17 @@ var SENSOR_CAP_VOCABULARY = {
 		}],
 		events: { onMotionChanged: { notOperatorFacing: "the `detected` state trigger phrases both edges, from the mirror that survives a dropped event (D49)" } }
 	},
+	meter: {
+		scope: "device",
+		noun: t("Meter", "Contatore"),
+		state: [{
+			kind: "numeric",
+			field: "value",
+			quantity: t("the total", "il totale"),
+			label: t("Total", "Totale"),
+			icon: "gauge"
+		}]
+	},
 	"numeric-sensor": {
 		scope: "device",
 		noun: t("Sensor", "Sensore"),
@@ -83647,8 +84607,47 @@ function projectAction(cap, action) {
 	};
 }
 Object.entries(CAP_VOCABULARY_BY_NAME).flatMap(([cap, entry]) => entry.scope === "device" ? (entry.actions ?? []).map((a) => projectAction(cap, a)) : []);
-DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher;
+DeviceType.Camera, DeviceType.Hub, DeviceType.Light, DeviceType.Siren, DeviceType.Switch, DeviceType.Sensor, DeviceType.Thermostat, DeviceType.Climate, DeviceType.Button, DeviceType.EventEmitter, DeviceType.Update, DeviceType.Generic, DeviceType.Notifier, DeviceType.Script, DeviceType.Automation, DeviceType.Lock, DeviceType.Cover, DeviceType.Valve, DeviceType.Humidifier, DeviceType.WaterHeater, DeviceType.Fan, DeviceType.MediaPlayer, DeviceType.AlarmPanel, DeviceType.Control, DeviceType.Presence, DeviceType.Weather, DeviceType.Vacuum, DeviceType.LawnMower, DeviceType.Container, DeviceType.Image, DeviceType.PetFeeder, DeviceType.Dishwasher, DeviceType.Washer, DeviceType.Dryer;
 DeviceFeature.BatteryOperated;
+DeviceType.Washer, DeviceType.Dryer, DeviceType.Dishwasher;
+var HA_AS = "a power sensor (device_class power). Home Assistant has no laundry domain. running-state stays unexported until a null reading can be published as unavailable.";
+var HOMEKIT_REASON = "HomeKit has no laundry-appliance service. The export tab would pair an accessory with nothing on it: running-state is withheld until a null reading can be unavailable, and power is not a HomeKit service this export honours.";
+var ALEXA_REASON = "Alexa has no laundry category in this export, and neither power nor running has an Alexa interface.";
+var GOOGLE_REASON = "Google WASHER, DRYER and DISHWASHER require RunCycle. A power threshold is not that trait, and this export does not publish RunCycle.";
+var MATTER_REASON = "No Matter export is built. The closest device types are Laundry Washer (0x0073) and Laundry Dryer (0x0074); a power threshold is not the Laundry Washer Mode cluster.";
+function withheld(reason) {
+	return {
+		[DeviceType.Washer]: {
+			exported: false,
+			reason
+		},
+		[DeviceType.Dryer]: {
+			exported: false,
+			reason
+		},
+		[DeviceType.Dishwasher]: {
+			exported: false,
+			reason
+		}
+	};
+}
+function offered(received) {
+	return {
+		[DeviceType.Washer]: {
+			exported: true,
+			as: received
+		},
+		[DeviceType.Dryer]: {
+			exported: true,
+			as: received
+		},
+		[DeviceType.Dishwasher]: {
+			exported: true,
+			as: received
+		}
+	};
+}
+offered(HA_AS), withheld(HOMEKIT_REASON), withheld(ALEXA_REASON), withheld(GOOGLE_REASON), withheld(MATTER_REASON);
 Object.freeze({
 	"accessories.getStatus": [{
 		name: "deviceId",
@@ -84615,6 +85614,21 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"groupActive.getStatus": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
+	"groupCommands.getStatus": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
+	"groupStatus.getStatus": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"heatingValve.getStatus": [{
 		name: "deviceId",
 		form: "single",
@@ -84815,6 +85829,11 @@ Object.freeze({
 		form: "single",
 		optional: false
 	}],
+	"meter.getStatus": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"motion.getStatus": [{
 		name: "deviceId",
 		form: "single",
@@ -86422,7 +87441,6 @@ Object.freeze({
 	"network-access": "ingress",
 	"smtp-provider": "email"
 });
-DeviceType.Camera;
 /**
 * A saved Customize assignment (D936). The schema is the type: callers use
 * `z.infer`, they do not restate the shape.
@@ -86649,6 +87667,8 @@ new Map(Object.entries({
 	"detection-blind": "device-events",
 	"motion-noisy": "device-events",
 	"motion-calm": "device-events",
+	"package-llm-silent": "device-events",
+	"package-llm-answered": "device-events",
 	"recording-stalled": "device-events",
 	"recording-healthy": "device-events",
 	"recording-degraded": "device-events",
@@ -86732,6 +87752,12 @@ var NC_SYSTEM_EVENT_KIND_GROUP_SPECS = [
 		label: "Motion without a subject",
 		kinds: ["motion-noisy", "motion-calm"]
 	},
+	{
+		id: "package-llm",
+		family: "device-events",
+		label: "Package confirm",
+		kinds: ["package-llm-silent", "package-llm-answered"]
+	},
 	{
 		id: "recording",
 		family: "device-events",
@@ -86913,6 +87939,8 @@ var DEVICE_EVENTS = [
 	"detection-blind",
 	"motion-noisy",
 	"motion-calm",
+	"package-llm-silent",
+	"package-llm-answered",
 	"recording-stalled",
 	"recording-healthy",
 	"recording-degraded",
@@ -87181,6 +88209,15 @@ new Map([
 		snapshotLabel: "Cameras with constant motion now",
 		snapshotSection: null
 	},
+	{
+		id: "package-llm-confirm",
+		family: "device-events",
+		label: "Package confirm (not answering / answering again)",
+		bad: ["package-llm-silent"],
+		recovery: ["package-llm-answered"],
+		snapshotLabel: "Cameras whose package confirm is not answering",
+		snapshotSection: null
+	},
 	{
 		id: "recording-health",
 		family: "device-events",