@camstack/addon-notifiers 1.2.127 → 1.2.128

package/dist/addon.js

@@ -14267,7 +14267,7 @@ DeviceType.Camera;
 * This matters here more than anywhere else in the repo, because every provider
 * that knows a device's host knows its PASSWORD too: `{ host, port, username,
 * password }` sit in one object on Hikvision, Amcrest, Reolink and ONVIF alike,
-* and `http://admin:hunter2@192.168.x.x/` is a URL a browser accepts. The
+* and `http://admin:hunter2@192.168.60.139/` is a URL a browser accepts. The
 * camera's own page will ask for its own login. That is correct, and pre-
 * filling it is the operator's business, not ours.
 *
@@ -19739,8 +19739,9 @@ var NcRuleSchema = NcRuleInputSchema.extend({
 	disabledTargetIds: array(string()).default([])
 });
 /**
-* The state-summary SECTIONS (D647 / D698): the D637 kind groups that report a
-* still-true state. `backups-exports` and `alarm` are not sections — a completed
+* The state-summary SECTIONS (D647 / D698 / D708): the D637 kind groups that
+* report a still-true state. `addons` is the crash-looped addons only and
+* `addon-updates` the addons that are behind (D708 split them). `backups-exports` and `alarm` are not sections — a completed
 * job is not an open state, and the alarm stays instant.
 */
 var NcStateSummarySectionIdSchema = _enum([
@@ -19752,6 +19753,7 @@ var NcStateSummarySectionIdSchema = _enum([
 	"detection-blind",
 	"nodes",
 	"addons",
+	"addon-updates",
 	"updates"
 ]);
 /** One section of a previewed state summary. `unavailable` = its state could not be read. */
@@ -20232,7 +20234,19 @@ var NcAlarmModeDelaysListSchema = array(object({
 	* When this mode may be armed. Absent / null = always allowed (same as a
 	* rule with no `schedule`). Evaluated with {@link isScheduleActive}.
 	*/
-	schedule: NcScheduleSchema.optional()
+	schedule: NcScheduleSchema.optional(),
+	/**
+	* D706: while this mode's ENTRY DELAY runs, do the alarm rules' own pushes go out (as an
+	* intrusion naming the locations)? Absent = false — the entry-delay notification is the
+	* only one, and the matches ride the triggered notification's mosaic (D705).
+	*/
+	notifyDuringEntryDelay: boolean().optional(),
+	/**
+	* D706: notify "watched again" when a sensor this arm bypassed closes and opens again.
+	* Absent = false (logged, not sent). Even when true it is not sent when that same sensor
+	* is the one that starts the entry delay — the entry-delay notification already names it.
+	*/
+	notifySensorRewatched: boolean().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one entry per arm mode" });
 var NcAlarmModeDelaysEditListSchema = array(object({
 	mode: AlarmArmModeSchema,
@@ -20241,7 +20255,11 @@ var NcAlarmModeDelaysEditListSchema = array(object({
 	triggeredDurationSec: NcAlarmTriggeredSecSchema.nullable().optional(),
 	postTriggeredAction: NcAlarmPostTriggeredActionSchema.nullable().optional(),
 	/** Set a schedule, or `null` to clear (mode always allowed again). */
-	schedule: NcScheduleSchema.nullable().optional()
+	schedule: NcScheduleSchema.nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifyDuringEntryDelay: boolean().nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifySensorRewatched: boolean().nullable().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one edit per arm mode" });
 /** One switch of the alarm table: put ONE device on, or take it off, ONE mode's list. */
 var NcAlarmNonBlockingEditSchema = object({
@@ -24062,6 +24080,22 @@ var MotionSourceEnum = _enum([
 	"device-activity"
 ]);
 /**
+* What opened an on-motion detection SESSION: the motion source that passed the
+* camera's `motionSources` gate, and what raised it (the camera itself, or a
+* sensor the operator attached — D672). `sensorName` is the attached sensor's
+* device name as the orchestrator's camera-sensors resolution last read it;
+* absent when unknown or when the camera itself triggered.
+*
+* Carried on the session attach ONLY so the runner's `DetectionPhaseTransition`
+* can say what started the session (D672 rule 11, amended 2026-10-06). The
+* runner never decides anything on it.
+*/
+var SessionTriggerSchema = object({
+	source: MotionSourceEnum,
+	triggeredBy: MotionTriggeredBySchema,
+	sensorName: string().optional()
+});
+/**
 * List of motion sources active on a camera. Empty array is valid:
 * "no source" — happens for battery cams without firmware motion when
 * the operator hasn't opted into the SW analyzer (would hold the
@@ -24313,6 +24347,14 @@ var RunnerCameraConfigSchema = object({
 	*/
 	motionSources: MotionSourcesSchema.default(["analyzer"]),
 	/**
+	* What opened this attach, on a SESSION attach only (see
+	* {@link SessionTriggerSchema}). OPTIONAL with no default: absent on a
+	* standing attach, an occupancy burst, a re-dispatch with no motion event
+	* behind it, and every attach from an orchestrator older than the field — the
+	* runner then names no source on the phase event.
+	*/
+	sessionTrigger: SessionTriggerSchema.optional(),
+	/**
 	* WHICH root detector runs for this camera. The detection counterpart of
 	* {@link motionSources}, same shape and same discipline: a per-camera list
 	* of sources the system understands, vendor-agnostic, owned here.
@@ -30536,7 +30578,7 @@ var LocalInterfaceSchema = object({
 	name: string(),
 	family: _enum(["IPv4", "IPv6"]),
 	address: string(),
-	/** CIDR shorthand (e.g. `192.168.x.x/24`). Empty when OS doesn't expose. */
+	/** CIDR shorthand (e.g. `192.168.10.10/24`). Empty when OS doesn't expose. */
 	cidr: string(),
 	/** OS netmask. Stable across calls so the SDK can hash on it. */
 	netmask: string(),
@@ -30590,7 +30632,8 @@ var ConnectionEndpointSchema = object({
 		"lan-ipv4",
 		"lan-ipv6",
 		"public",
-		"loopback"
+		"loopback",
+		"app-link"
 	]),
 	/**
 	* Originating-interface kind — `lan`/`wifi`/`docker`/`vpn`/`other`/
@@ -30659,15 +30702,27 @@ var GetConnectionEndpointsResultSchema = object({
 	localPort: AdvertisedLocalPortSchema
 });
 /**
-* The chosen outbound endpoint for notification artifacts. `baseUrl: null` =
-* AUTO (resolved from the candidate ranking at send time); `resolved` reports
-* what AUTO currently picks, so the UI can show the effective value either way.
+* The address flagged for notification links. `baseUrl: null` = AUTO, which
+* since D709 is the CamStack app link; `resolved` reports the effective value,
+* so the UI can show it either way.
 */
 var NotificationEndpointSchema = object({
 	/** The operator's explicit choice, or null for AUTO. */
 	baseUrl: string().nullable(),
-	/** What the ranking currently resolves to (null when nothing is reachable). */
-	resolved: string().nullable()
+	/**
+	* The effective flagged address: the explicit choice, else (AUTO) the
+	* CamStack app link `https://camstack.zentik.app` (D709). A pre-D709 hub
+	* answered the public tunnel / mesh here, or null.
+	*/
+	resolved: string().nullable(),
+	/**
+	* The hub origin an app link carries as `hub=` (D709): the hub's best
+	* public HTTPS address — the tunnel, then the mesh (Tailscale MagicDNS) —
+	* picked from this cap's own palette by `pickAppLinkHub`. `null` when the
+	* hub advertises neither; the app link is then minted without `hub=`.
+	* Absent on a pre-D709 hub.
+	*/
+	appLinkHub: string().nullable()
 });
 /**
 * The URLs the SDK / viewer should race for API access. `baseUrls` empty =
@@ -30721,7 +30776,11 @@ method(_void(), ListResultSchema), method(_void(), PreferredSchema), method(obje
 	*  Pass `'https'` when the caller is itself loaded over HTTPS
 	*  to avoid mixed-content blocks in the browser. The public
 	*  tunnel always emits `https://` regardless. */
-	scheme: _enum(["http", "https"]).optional()
+	scheme: _enum(["http", "https"]).optional(),
+	/** Append the CamStack app link entry (`kind: 'app-link'`, D709) —
+	*  an address notification links can be flagged with, not a hub
+	*  route. Default `false`: racers and rankers never see it. */
+	includeAppLink: boolean().optional()
 }), GetConnectionEndpointsResultSchema), method(_void(), NotificationEndpointSchema), method(object({ baseUrl: string().nullable() }), NotificationEndpointSchema, { kind: "mutation" }), method(_void(), ViewerEndpointsSchema), method(object({ baseUrls: array(string()).readonly() }), ViewerEndpointsSchema, { kind: "mutation" }), method(_void(), AllowedAddressesSchema), method(AllowedAddressesSchema, object({ success: literal(true) }), { kind: "mutation" }), method(_void(), AllowedAddressesSchema, { kind: "mutation" }), method(_void(), TlsStatusSchema), method(object({ reason: string().optional() }), TlsStatusSchema, {
 	kind: "mutation",
 	auth: "admin"
@@ -30982,7 +31041,7 @@ var MeshPeerSchema = object({
 	tags: array(string()).readonly(),
 	/** True when the peer advertises itself as an exit-node candidate. */
 	exitNodeOption: boolean(),
-	/** Subnet routes the peer advertises (e.g. `["192.168.x.x/24"]`). */
+	/** Subnet routes the peer advertises (e.g. `["192.168.10.0/24"]`). */
 	advertisedRoutes: array(string()).readonly(),
 	/** Owner account login (e.g. `foo@example.com`). Null for tagged peers. */
 	userLogin: string().nullable(),
@@ -47932,12 +47991,14 @@ var NC_SYSTEM_EVENT_KIND_GROUP_SPECS = [
 	{
 		id: "addons",
 		family: "system",
-		label: "Addons",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Addons stopped",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		id: "addon-updates",
+		family: "system",
+		label: "Addon updates",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		id: "updates",
@@ -48097,13 +48158,15 @@ var STATE_SUMMARY_SECTION_VARS = [
 	},
 	{
 		name: "summaryAddons",
-		label: "Summary: addons",
-		example: "@camstack/addon-recorder 1.2.3 → 1.2.4",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Summary: addons stopped",
+		example: "hub — recorder stopped after repeated crashes",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		name: "summaryAddonUpdates",
+		label: "Summary: addon updates",
+		example: "hub:\n• @camstack/addon-recorder 1.2.3 → 1.2.4",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		name: "summaryUpdates",
@@ -48187,6 +48250,7 @@ var STATE_SUMMARY_VARS = [
 	[...RULE_BODY_ONLY],
 	[...RULE_TEXT],
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
+	([...RULE_TEXT], [...COMBINED_ALARM]),
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
 	([...RULE_TEXT], [...BATTERY, ...CONSUMABLE]),
 	([...RULE_TEXT], [...CONSUMABLE]),

package/dist/addon.mjs

@@ -14240,7 +14240,7 @@ DeviceType.Camera;
 * This matters here more than anywhere else in the repo, because every provider
 * that knows a device's host knows its PASSWORD too: `{ host, port, username,
 * password }` sit in one object on Hikvision, Amcrest, Reolink and ONVIF alike,
-* and `http://admin:hunter2@192.168.x.x/` is a URL a browser accepts. The
+* and `http://admin:hunter2@192.168.60.139/` is a URL a browser accepts. The
 * camera's own page will ask for its own login. That is correct, and pre-
 * filling it is the operator's business, not ours.
 *
@@ -19712,8 +19712,9 @@ var NcRuleSchema = NcRuleInputSchema.extend({
 	disabledTargetIds: array(string()).default([])
 });
 /**
-* The state-summary SECTIONS (D647 / D698): the D637 kind groups that report a
-* still-true state. `backups-exports` and `alarm` are not sections — a completed
+* The state-summary SECTIONS (D647 / D698 / D708): the D637 kind groups that
+* report a still-true state. `addons` is the crash-looped addons only and
+* `addon-updates` the addons that are behind (D708 split them). `backups-exports` and `alarm` are not sections — a completed
 * job is not an open state, and the alarm stays instant.
 */
 var NcStateSummarySectionIdSchema = _enum([
@@ -19725,6 +19726,7 @@ var NcStateSummarySectionIdSchema = _enum([
 	"detection-blind",
 	"nodes",
 	"addons",
+	"addon-updates",
 	"updates"
 ]);
 /** One section of a previewed state summary. `unavailable` = its state could not be read. */
@@ -20205,7 +20207,19 @@ var NcAlarmModeDelaysListSchema = array(object({
 	* When this mode may be armed. Absent / null = always allowed (same as a
 	* rule with no `schedule`). Evaluated with {@link isScheduleActive}.
 	*/
-	schedule: NcScheduleSchema.optional()
+	schedule: NcScheduleSchema.optional(),
+	/**
+	* D706: while this mode's ENTRY DELAY runs, do the alarm rules' own pushes go out (as an
+	* intrusion naming the locations)? Absent = false — the entry-delay notification is the
+	* only one, and the matches ride the triggered notification's mosaic (D705).
+	*/
+	notifyDuringEntryDelay: boolean().optional(),
+	/**
+	* D706: notify "watched again" when a sensor this arm bypassed closes and opens again.
+	* Absent = false (logged, not sent). Even when true it is not sent when that same sensor
+	* is the one that starts the entry delay — the entry-delay notification already names it.
+	*/
+	notifySensorRewatched: boolean().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one entry per arm mode" });
 var NcAlarmModeDelaysEditListSchema = array(object({
 	mode: AlarmArmModeSchema,
@@ -20214,7 +20228,11 @@ var NcAlarmModeDelaysEditListSchema = array(object({
 	triggeredDurationSec: NcAlarmTriggeredSecSchema.nullable().optional(),
 	postTriggeredAction: NcAlarmPostTriggeredActionSchema.nullable().optional(),
 	/** Set a schedule, or `null` to clear (mode always allowed again). */
-	schedule: NcScheduleSchema.nullable().optional()
+	schedule: NcScheduleSchema.nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifyDuringEntryDelay: boolean().nullable().optional(),
+	/** D706: set the switch, or `null` to clear it (back to the default, false). */
+	notifySensorRewatched: boolean().nullable().optional()
 })).max(8).refine(uniqueModes, { message: "modeDelays: at most one edit per arm mode" });
 /** One switch of the alarm table: put ONE device on, or take it off, ONE mode's list. */
 var NcAlarmNonBlockingEditSchema = object({
@@ -24035,6 +24053,22 @@ var MotionSourceEnum = _enum([
 	"device-activity"
 ]);
 /**
+* What opened an on-motion detection SESSION: the motion source that passed the
+* camera's `motionSources` gate, and what raised it (the camera itself, or a
+* sensor the operator attached — D672). `sensorName` is the attached sensor's
+* device name as the orchestrator's camera-sensors resolution last read it;
+* absent when unknown or when the camera itself triggered.
+*
+* Carried on the session attach ONLY so the runner's `DetectionPhaseTransition`
+* can say what started the session (D672 rule 11, amended 2026-10-06). The
+* runner never decides anything on it.
+*/
+var SessionTriggerSchema = object({
+	source: MotionSourceEnum,
+	triggeredBy: MotionTriggeredBySchema,
+	sensorName: string().optional()
+});
+/**
 * List of motion sources active on a camera. Empty array is valid:
 * "no source" — happens for battery cams without firmware motion when
 * the operator hasn't opted into the SW analyzer (would hold the
@@ -24286,6 +24320,14 @@ var RunnerCameraConfigSchema = object({
 	*/
 	motionSources: MotionSourcesSchema.default(["analyzer"]),
 	/**
+	* What opened this attach, on a SESSION attach only (see
+	* {@link SessionTriggerSchema}). OPTIONAL with no default: absent on a
+	* standing attach, an occupancy burst, a re-dispatch with no motion event
+	* behind it, and every attach from an orchestrator older than the field — the
+	* runner then names no source on the phase event.
+	*/
+	sessionTrigger: SessionTriggerSchema.optional(),
+	/**
 	* WHICH root detector runs for this camera. The detection counterpart of
 	* {@link motionSources}, same shape and same discipline: a per-camera list
 	* of sources the system understands, vendor-agnostic, owned here.
@@ -30509,7 +30551,7 @@ var LocalInterfaceSchema = object({
 	name: string(),
 	family: _enum(["IPv4", "IPv6"]),
 	address: string(),
-	/** CIDR shorthand (e.g. `192.168.x.x/24`). Empty when OS doesn't expose. */
+	/** CIDR shorthand (e.g. `192.168.10.10/24`). Empty when OS doesn't expose. */
 	cidr: string(),
 	/** OS netmask. Stable across calls so the SDK can hash on it. */
 	netmask: string(),
@@ -30563,7 +30605,8 @@ var ConnectionEndpointSchema = object({
 		"lan-ipv4",
 		"lan-ipv6",
 		"public",
-		"loopback"
+		"loopback",
+		"app-link"
 	]),
 	/**
 	* Originating-interface kind — `lan`/`wifi`/`docker`/`vpn`/`other`/
@@ -30632,15 +30675,27 @@ var GetConnectionEndpointsResultSchema = object({
 	localPort: AdvertisedLocalPortSchema
 });
 /**
-* The chosen outbound endpoint for notification artifacts. `baseUrl: null` =
-* AUTO (resolved from the candidate ranking at send time); `resolved` reports
-* what AUTO currently picks, so the UI can show the effective value either way.
+* The address flagged for notification links. `baseUrl: null` = AUTO, which
+* since D709 is the CamStack app link; `resolved` reports the effective value,
+* so the UI can show it either way.
 */
 var NotificationEndpointSchema = object({
 	/** The operator's explicit choice, or null for AUTO. */
 	baseUrl: string().nullable(),
-	/** What the ranking currently resolves to (null when nothing is reachable). */
-	resolved: string().nullable()
+	/**
+	* The effective flagged address: the explicit choice, else (AUTO) the
+	* CamStack app link `https://camstack.zentik.app` (D709). A pre-D709 hub
+	* answered the public tunnel / mesh here, or null.
+	*/
+	resolved: string().nullable(),
+	/**
+	* The hub origin an app link carries as `hub=` (D709): the hub's best
+	* public HTTPS address — the tunnel, then the mesh (Tailscale MagicDNS) —
+	* picked from this cap's own palette by `pickAppLinkHub`. `null` when the
+	* hub advertises neither; the app link is then minted without `hub=`.
+	* Absent on a pre-D709 hub.
+	*/
+	appLinkHub: string().nullable()
 });
 /**
 * The URLs the SDK / viewer should race for API access. `baseUrls` empty =
@@ -30694,7 +30749,11 @@ method(_void(), ListResultSchema), method(_void(), PreferredSchema), method(obje
 	*  Pass `'https'` when the caller is itself loaded over HTTPS
 	*  to avoid mixed-content blocks in the browser. The public
 	*  tunnel always emits `https://` regardless. */
-	scheme: _enum(["http", "https"]).optional()
+	scheme: _enum(["http", "https"]).optional(),
+	/** Append the CamStack app link entry (`kind: 'app-link'`, D709) —
+	*  an address notification links can be flagged with, not a hub
+	*  route. Default `false`: racers and rankers never see it. */
+	includeAppLink: boolean().optional()
 }), GetConnectionEndpointsResultSchema), method(_void(), NotificationEndpointSchema), method(object({ baseUrl: string().nullable() }), NotificationEndpointSchema, { kind: "mutation" }), method(_void(), ViewerEndpointsSchema), method(object({ baseUrls: array(string()).readonly() }), ViewerEndpointsSchema, { kind: "mutation" }), method(_void(), AllowedAddressesSchema), method(AllowedAddressesSchema, object({ success: literal(true) }), { kind: "mutation" }), method(_void(), AllowedAddressesSchema, { kind: "mutation" }), method(_void(), TlsStatusSchema), method(object({ reason: string().optional() }), TlsStatusSchema, {
 	kind: "mutation",
 	auth: "admin"
@@ -30955,7 +31014,7 @@ var MeshPeerSchema = object({
 	tags: array(string()).readonly(),
 	/** True when the peer advertises itself as an exit-node candidate. */
 	exitNodeOption: boolean(),
-	/** Subnet routes the peer advertises (e.g. `["192.168.x.x/24"]`). */
+	/** Subnet routes the peer advertises (e.g. `["192.168.10.0/24"]`). */
 	advertisedRoutes: array(string()).readonly(),
 	/** Owner account login (e.g. `foo@example.com`). Null for tagged peers. */
 	userLogin: string().nullable(),
@@ -47905,12 +47964,14 @@ var NC_SYSTEM_EVENT_KIND_GROUP_SPECS = [
 	{
 		id: "addons",
 		family: "system",
-		label: "Addons",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Addons stopped",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		id: "addon-updates",
+		family: "system",
+		label: "Addon updates",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		id: "updates",
@@ -48070,13 +48131,15 @@ var STATE_SUMMARY_SECTION_VARS = [
 	},
 	{
 		name: "summaryAddons",
-		label: "Summary: addons",
-		example: "@camstack/addon-recorder 1.2.3 → 1.2.4",
-		kinds: [
-			"addon-crash-loop",
-			"addon-update-available",
-			"addon-updated"
-		]
+		label: "Summary: addons stopped",
+		example: "hub — recorder stopped after repeated crashes",
+		kinds: ["addon-crash-loop"]
+	},
+	{
+		name: "summaryAddonUpdates",
+		label: "Summary: addon updates",
+		example: "hub:\n• @camstack/addon-recorder 1.2.3 → 1.2.4",
+		kinds: ["addon-update-available", "addon-updated"]
 	},
 	{
 		name: "summaryUpdates",
@@ -48160,6 +48223,7 @@ var STATE_SUMMARY_VARS = [
 	[...RULE_BODY_ONLY],
 	[...RULE_TEXT],
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
+	([...RULE_TEXT], [...COMBINED_ALARM]),
 	([...RULE_TEXT], [...DEVICE_EVENTS]),
 	([...RULE_TEXT], [...BATTERY, ...CONSUMABLE]),
 	([...RULE_TEXT], [...CONSUMABLE]),

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-notifiers",
-  "version": "1.2.127",
+  "version": "1.2.128",
   "description": "System notifiers addon for CamStack — a `notification-output` collection provider hosting per-kind notifier adapters (ntfy, pushover, gotify, telegram, discord, webhook, zentik).",
   "keywords": [
     "camstack",