@camstack/addon-mqtt-broker 1.2.88 → 1.2.90

package/dist/mqtt-broker.addon.js

@@ -20441,6 +20441,22 @@ var occupancyRecheckFramesField = {
 	step: 1
 };
 /**
+* Frames one PRE-ROLL catch-up burst may send to inference at session open.
+*
+* The default of 12 over a ~4 s retained window is one frame per ~333 ms of
+* footage, and costs ~480 ms of ONE inference permit at the 40 ms/frame this
+* fleet measures — one-shot, and only ever taken while a permit would still be
+* spare for live. `0` turns the burst off entirely (the history is still
+* decoded, because that is how the dial reaches a decodable GOP, and is then
+* discarded — the pre-D411 behaviour).
+*/
+var preRollInferenceFramesField = {
+	min: 0,
+	max: 30,
+	default: 12,
+	step: 1
+};
+/**
 * Source enum for motion signals fed to the runner. Extensible — add
 * new variants here when new motion-trigger paths are wired in
 * (`wasm-cross-camera`, `event-bus-relay`, etc.). The runner uses
@@ -20681,6 +20697,31 @@ var RunnerCameraConfigSchema = object({
 	* to every occupancy rule until something moved in front of it. The churn is
 	* now paid on the interval instead — see `occupancyRecheckSecField`.
 	*/
+	/**
+	* Infer the session's PRE-ROLL — the retained history the restreamer replays
+	* at session open — instead of decoding it and throwing it away.
+	*
+	* DEFAULT `true`, and the default is the argument. This is not a new
+	* capability being offered cautiously: the pre-roll is ALREADY requested,
+	* already served, already decoded and already paid for on every on-motion
+	* detection session that asks for history. What shipped was a last-moment
+	* discard — `FrameSlot`'s throttle compares wall clocks, and ~4 s of media
+	* arriving inside a few hundred ms of wall clock looks to it like one frame's
+	* worth. Device 617, 2026-09-08: a re-run of the SAME model over the stored
+	* recording scored the subject `vehicle 0.5669` — above the 0.50 floor —
+	* 1.68 s BEFORE the live track was born, on a frame that was in the pre-roll,
+	* was decoded, and was freed.
+	*
+	* Shipping that as opt-in would ship the bug: an operator cannot discover a
+	* setting whose absence looks exactly like a camera that noticed the cyclist
+	* late. What makes ON safe is not a switch but the BOUND —
+	* `preRollInferenceFrames`, a wall-clock ceiling, and a lane that never takes
+	* the last inference permit — so the switch exists for the camera where the
+	* history is worthless (a doorbell whose subject is always already at the
+	* door), not as a hedge against the feature.
+	*/
+	preRollInferenceEnabled: boolean().default(true),
+	preRollInferenceFrames: number().min(preRollInferenceFramesField.min).max(preRollInferenceFramesField.max).default(preRollInferenceFramesField.default),
 	occupancyRecheckEnabled: boolean().default(true),
 	occupancyRecheckSec: number().min(occupancyRecheckSecField.min).max(occupancyRecheckSecField.max).default(occupancyRecheckSecField.default),
 	occupancyRecheckFrames: number().min(occupancyRecheckFramesField.min).max(occupancyRecheckFramesField.max).default(occupancyRecheckFramesField.default),
@@ -20709,7 +20750,7 @@ var RunnerCameraConfigSchema = object({
 	*/
 	inferenceDevices: array(RunnerInferenceDeviceSchema).readonly().optional()
 });
-motionFpsField.min, motionFpsField.max, motionFpsField.step, motionFpsField.default, detectionFpsField.min, detectionFpsField.max, detectionFpsField.step, detectionFpsField.default, motionCooldownMsField.min, motionCooldownMsField.max, motionCooldownMsField.step, motionCooldownMsField.default, maxSessionHoldMsField.min, maxSessionHoldMsField.max, maxSessionHoldMsField.step, maxSessionHoldMsField.default, audioMotionWindowMsField.min, audioMotionWindowMsField.max, audioMotionWindowMsField.step, audioMotionWindowMsField.default, occupancyRecheckSecField.min, occupancyRecheckSecField.max, occupancyRecheckSecField.step, occupancyRecheckSecField.default, occupancyRecheckFramesField.min, occupancyRecheckFramesField.max, occupancyRecheckFramesField.step, occupancyRecheckFramesField.default;
+motionFpsField.min, motionFpsField.max, motionFpsField.step, motionFpsField.default, detectionFpsField.min, detectionFpsField.max, detectionFpsField.step, detectionFpsField.default, motionCooldownMsField.min, motionCooldownMsField.max, motionCooldownMsField.step, motionCooldownMsField.default, maxSessionHoldMsField.min, maxSessionHoldMsField.max, maxSessionHoldMsField.step, maxSessionHoldMsField.default, audioMotionWindowMsField.min, audioMotionWindowMsField.max, audioMotionWindowMsField.step, audioMotionWindowMsField.default, preRollInferenceFramesField.min, preRollInferenceFramesField.max, preRollInferenceFramesField.step, preRollInferenceFramesField.default, occupancyRecheckSecField.min, occupancyRecheckSecField.max, occupancyRecheckSecField.step, occupancyRecheckSecField.default, occupancyRecheckFramesField.min, occupancyRecheckFramesField.max, occupancyRecheckFramesField.step, occupancyRecheckFramesField.default;
 /**
 * Runtime load summary returned by `getLocalLoad`. Used by the orchestrator's
 * load-balancing levels (L2 capacity-based, L3 hardware-aware) to decide

package/dist/mqtt-broker.addon.mjs

@@ -20436,6 +20436,22 @@ var occupancyRecheckFramesField = {
 	step: 1
 };
 /**
+* Frames one PRE-ROLL catch-up burst may send to inference at session open.
+*
+* The default of 12 over a ~4 s retained window is one frame per ~333 ms of
+* footage, and costs ~480 ms of ONE inference permit at the 40 ms/frame this
+* fleet measures — one-shot, and only ever taken while a permit would still be
+* spare for live. `0` turns the burst off entirely (the history is still
+* decoded, because that is how the dial reaches a decodable GOP, and is then
+* discarded — the pre-D411 behaviour).
+*/
+var preRollInferenceFramesField = {
+	min: 0,
+	max: 30,
+	default: 12,
+	step: 1
+};
+/**
 * Source enum for motion signals fed to the runner. Extensible — add
 * new variants here when new motion-trigger paths are wired in
 * (`wasm-cross-camera`, `event-bus-relay`, etc.). The runner uses
@@ -20676,6 +20692,31 @@ var RunnerCameraConfigSchema = object({
 	* to every occupancy rule until something moved in front of it. The churn is
 	* now paid on the interval instead — see `occupancyRecheckSecField`.
 	*/
+	/**
+	* Infer the session's PRE-ROLL — the retained history the restreamer replays
+	* at session open — instead of decoding it and throwing it away.
+	*
+	* DEFAULT `true`, and the default is the argument. This is not a new
+	* capability being offered cautiously: the pre-roll is ALREADY requested,
+	* already served, already decoded and already paid for on every on-motion
+	* detection session that asks for history. What shipped was a last-moment
+	* discard — `FrameSlot`'s throttle compares wall clocks, and ~4 s of media
+	* arriving inside a few hundred ms of wall clock looks to it like one frame's
+	* worth. Device 617, 2026-09-08: a re-run of the SAME model over the stored
+	* recording scored the subject `vehicle 0.5669` — above the 0.50 floor —
+	* 1.68 s BEFORE the live track was born, on a frame that was in the pre-roll,
+	* was decoded, and was freed.
+	*
+	* Shipping that as opt-in would ship the bug: an operator cannot discover a
+	* setting whose absence looks exactly like a camera that noticed the cyclist
+	* late. What makes ON safe is not a switch but the BOUND —
+	* `preRollInferenceFrames`, a wall-clock ceiling, and a lane that never takes
+	* the last inference permit — so the switch exists for the camera where the
+	* history is worthless (a doorbell whose subject is always already at the
+	* door), not as a hedge against the feature.
+	*/
+	preRollInferenceEnabled: boolean().default(true),
+	preRollInferenceFrames: number().min(preRollInferenceFramesField.min).max(preRollInferenceFramesField.max).default(preRollInferenceFramesField.default),
 	occupancyRecheckEnabled: boolean().default(true),
 	occupancyRecheckSec: number().min(occupancyRecheckSecField.min).max(occupancyRecheckSecField.max).default(occupancyRecheckSecField.default),
 	occupancyRecheckFrames: number().min(occupancyRecheckFramesField.min).max(occupancyRecheckFramesField.max).default(occupancyRecheckFramesField.default),
@@ -20704,7 +20745,7 @@ var RunnerCameraConfigSchema = object({
 	*/
 	inferenceDevices: array(RunnerInferenceDeviceSchema).readonly().optional()
 });
-motionFpsField.min, motionFpsField.max, motionFpsField.step, motionFpsField.default, detectionFpsField.min, detectionFpsField.max, detectionFpsField.step, detectionFpsField.default, motionCooldownMsField.min, motionCooldownMsField.max, motionCooldownMsField.step, motionCooldownMsField.default, maxSessionHoldMsField.min, maxSessionHoldMsField.max, maxSessionHoldMsField.step, maxSessionHoldMsField.default, audioMotionWindowMsField.min, audioMotionWindowMsField.max, audioMotionWindowMsField.step, audioMotionWindowMsField.default, occupancyRecheckSecField.min, occupancyRecheckSecField.max, occupancyRecheckSecField.step, occupancyRecheckSecField.default, occupancyRecheckFramesField.min, occupancyRecheckFramesField.max, occupancyRecheckFramesField.step, occupancyRecheckFramesField.default;
+motionFpsField.min, motionFpsField.max, motionFpsField.step, motionFpsField.default, detectionFpsField.min, detectionFpsField.max, detectionFpsField.step, detectionFpsField.default, motionCooldownMsField.min, motionCooldownMsField.max, motionCooldownMsField.step, motionCooldownMsField.default, maxSessionHoldMsField.min, maxSessionHoldMsField.max, maxSessionHoldMsField.step, maxSessionHoldMsField.default, audioMotionWindowMsField.min, audioMotionWindowMsField.max, audioMotionWindowMsField.step, audioMotionWindowMsField.default, preRollInferenceFramesField.min, preRollInferenceFramesField.max, preRollInferenceFramesField.step, preRollInferenceFramesField.default, occupancyRecheckSecField.min, occupancyRecheckSecField.max, occupancyRecheckSecField.step, occupancyRecheckSecField.default, occupancyRecheckFramesField.min, occupancyRecheckFramesField.max, occupancyRecheckFramesField.step, occupancyRecheckFramesField.default;
 /**
 * Runtime load summary returned by `getLocalLoad`. Used by the orchestrator's
 * load-balancing levels (L2 capacity-based, L3 hardware-aware) to decide

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-mqtt-broker",
-  "version": "1.2.88",
+  "version": "1.2.90",
   "description": "MQTT broker registry addon for CamStack — manages external broker entries + an optional embedded aedes broker. Consumers spin up their own `mqtt.js` clients via the `mqtt-broker` cap.",
   "keywords": [
     "camstack",